4341-R2 Price, nhà phân phối, Stock

4341-R2 nhà phân phối

nhà phân phối

tên linh kiện

nhà sản xuất

Giải thích chi tiết về linh kiện

Price

Qty.
BuyNow

ComSIT USA

4,3417E+11

AVAILABLE EU

210

ComSIT USA

LNG8143415000MHZ

Nihon Dempa Kogyo Co Ltd

Electronic Component
RoHS : Compliant

7,895

6434121

TE Connectivity

Rectangular Power Connector, 2 Contact(s), Female, Solder Terminal, Plug
RoHS : Compliant

3,800

343417

Schurter Electronic Components

MINIATURE FUSE Electric Fuse, Time Lag Blow, 1A, 250VAC, 200A (IR), Inline/holder, 6.3x32mm
RoHS : Compliant

200

B43416S9477M1

epc

Electronic Component
RoHS : Not Compliant

CS4341AKSZ

Cirrus Logic

24-BIT, 192 KHZ STEREO DAC WITH VOLUME CONTROL D/A Converter, 1 Func, Serial Input Loading, PDSO16
RoHS : Compliant

NexGen Digital

643412-1

TE Connectivity

RoHS : Compliant

Avnet Silica

AC164341

Microchip Technology Inc

MPLAB PM3 Socket Module for 16P QFN 3x3mm devices (Alt: AC164341)
RoHS : Compliant

CDB4341A

Cirrus Logic

Evaluation Board For CS4341A (Alt: CDB4341A)
RoHS : Not Compliant

MCP4341-104E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 100 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-104E/ST)
RoHS : Compliant

MCP4341-103E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 10 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-103E/ST)
RoHS : Compliant

MCP4341-103E/ML

Microchip Technology Inc

Digital Potentiometer 128POS 10KOhm Quad 20Pin QFN EP Tube (Alt: MCP4341-103E/ML)
RoHS : Compliant

MCP4341-502E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 5 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V 20 Pins (Alt: MCP4341-502E/ST)
RoHS : Compliant

MCP4341-503E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 50 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-503E/ST)
RoHS : Compliant

MCP4341T-103E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 10 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341T-103E/ST)
RoHS : Compliant

MCP73843-410I/MS

Microchip Technology Inc

Linear Charge Management Controller LiIonLiPol Packs 30mA 41V 8Pin MSOP (Alt: MCP73843-410I/MS)
RoHS : Compliant

MCP4341T-502E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 5 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V 20 Pins (Alt: MCP4341T-502E/ST)
RoHS : Compliant

MCP4341T-503E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 50 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341T-503E/ST)
RoHS : Compliant

Chip-Germany GmbH

4,34123E+11

Wurth Elektronik

227

01434 100X540

Wohmer

VABA-S6-1-X1 543416

Festo

DB Roberts

C2-43-41

Southco

1 : $33.38
100 : $20.67
150 : $20.67

150

4341

Heyco

CH L-13-P NATURAL

EM-10-43-410

Southco

D8-316-434-190

Southco

Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o

MF-97-843-41

Southco

Mobella Key

D8-314-434-191

Southco

M4341GS

Heyco

LTCG M20 GRAY 6-3.0MM W/M9135

D3-314-434-190

Southco

D3-314-434-190

D8-319-434-170

Southco

D8-314-434-170

Southco

M4341GAC

Heyco

LTCG M20 GRAY 2-5.0MM W/M9135

M4341GX

Heyco

LTCG M20 GRAY 3-4.0MM W/M9135

D8-314-434-190

Southco

D8-319-434-191

Southco

C5-43-412

Southco

Streamlined looks and easy operation make this compression latch an ideal choice for highly visible installations requiring a secure sealed fit. Compressive action pulls door tight without rubbing action or wear on pawl or frame.

EBV Elektronik

MCP4341-104E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 100 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-104E/ST)
RoHS : Compliant

MCP4341-103E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 10 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-103E/ST)
RoHS : Compliant

MCP4341-503E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 50 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341-503E/ST)
RoHS : Compliant

CY8C20434-12LQXI

Infineon Technologies AG

(Alt: SP005648465)
RoHS : Compliant

MCP4341T-103E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 10 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341T-103E/ST)
RoHS : Compliant

MCP73843-410I/MS

Microchip Technology Inc

Linear Charge Management Controller LiIonLiPol Packs 30mA 41V 8Pin MSOP (Alt: MCP73843-410I/MS)
RoHS : Compliant

MCP4341T-503E/ST

Microchip Technology Inc

Digital Potentiometer NonVolatile 50 kOhm Quad 129 Steps 150 ppmC 27 V to 55 V (Alt: MCP4341T-503E/ST)
RoHS : Compliant

GWCSSRM3.PM-N8P1-A434-1-700-R33

ams OSRAM Group

(Alt: Q65113A7484)
RoHS : Compliant

GWCSSRM2.BM-M7M9-A434-1-700-R18

ams OSRAM Group

LEDOSLON Square (Alt: Q65113A9542)
RoHS : Compliant

FDH Electronics

1234-341-09192

TE Connectivity

Shell

100

1234-341-09228

TE Connectivity

Shell

100

1234-341-23192

TE Connectivity

Shell

100

1234-341-23228

TE Connectivity

Shell

100

1234-341-15192

TE Connectivity

Shell

1234-341-15228

TE Connectivity

Shell

6134-341-13149

TE Connectivity

Coupling Nut

6134-341-17149

TE Connectivity

Coupling Nut

S2306-6904-34-12

SOURIAU-SUNBANK

Backshells & Ac

S2306-7014-34-12

SOURIAU-SUNBANK

Placeholder

S2306-6704-34-12

SOURIAU-SUNBANK

Placeholder

3164341-013

Aptiv PLC

Connector Acc

ST5M1243-4108-1

DRI Relays Inc

Relays & Cont

1 : $1,874.044
5 : $1,874.044
10 : $1,621.769
25 : $1,479.509
50 : $1,405.533
100 : $1,360.194
250 : $1,297.415
500 : $1,240.176
1,000 : $1,204.743
2,500 : $1,204.743
10,000 : $1,204.743

ST5M1243-4120

DRI Relays Inc

Relays

1 : $2,477.676
5 : $2,477.676
10 : $2,144.143
25 : $1,956.06
50 : $1,858.257
100 : $1,798.314
250 : $1,715.314
500 : $1,639.639
1,000 : $1,592.792
2,500 : $1,592.792
10,000 : $1,592.792

ST5M1243-4104-1

DRI Relays Inc

Relays & Cont

1 : $2,237.125
5 : $2,237.125
10 : $1,935.974
25 : $1,766.152
50 : $1,677.844
100 : $1,623.72
250 : $1,548.779
500 : $1,480.451
1,000 : $1,438.152
2,500 : $1,438.152
10,000 : $1,438.152

Flip Electronics

CY8C20434-12LQXI

Infineon Technologies AG

Stock, Ship Today
RoHS : Compliant

1 : $1.62

394

Maritex

1241434-1

TE Connectivity

Male Pin Headers; 1241434-1; TE CONNECTIVITY; 3; Tin; Right Angle; 121
RoHS : Compliant

100 : $16.392
50 : $18.524
10 : $22.417
1 : $29.212

500

43.41.7.012.4300

FINDER SpA

Electromagnetic relay; contact rating current 10A; coil voltage 12VDC; make contact (1A); coil poweri 250 mW; 10A/30VDC; 10A/250VAC
RoHS : Compliant

60 : $3.763
20 : $4.28
10 : $4.54
1 : $4.7973

43.41.7.024.4000

FINDER SpA

Electromagnetic relay; contact rating current 10A; coil voltage 24VDC; changeover contact (1C); coil poweri 250 mW; 10A/30VDC; 10A/250VAC

200 : $3.294
100 : $3.32
60 : $3.605
40 : $3.814
20 : $4.048
1 : $4.3311

43.41.7.012.4000

FINDER SpA

Electromagnetic relay; contact rating current 10A; coil voltage 12VDC; changeover contact (1C); coil poweri 250 mW; 10A/30VDC; 10A/250VAC
RoHS : Compliant

200 : $3.218
100 : $3.32
60 : $3.605
40 : $3.814
20 : $4.048
1 : $4.3311

43.41.7.005.2000

FINDER SpA

Electromagnetic relay; contact rating current 10A; coil voltage 5VDC; changeover contact (1C); coil poweri 250 mW; 10A/30VDC; 10A/250VAC
RoHS : Compliant

60 : $3.908
20 : $4.448
10 : $4.718
1 : $4.9884

Pasternack Enterprises US

PE33434-12

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm BNC Male Right Angle to 75 Ohm BNC Male Right Angle Cable 12 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm BNC male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33434-12, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33434-12 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male right angle to 75 Ohm BNC male right angle cable 12 inch length using 75 Ohm RG187 coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

166

PE3W16434-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Limited Detent SMP Male Bulkhead to MMCX Plug Cable 12 Inch Length Using Tinned RG405 Coax., Radio frequency assembly limited detent SMP male bulkhead to MMCX plug cable 12 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The limited detent SMP male bulkhead to MMCX plug cable 12 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP bulkhead cable connection on one end and a MMCX cable connection on the other. Our SMP to MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W16434-12 can also be known as a SMP plug to MMCX male cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has a between series connection. Our bulkhead SMP male to MMCX plug cable has a maximum VSWR of 1.4:1. SMP plug to MMCX male cable assembly PE3W16434-12 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has the solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16434-12 can also be used in the other direction and will be a MMCX plug to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to MMCX RF cable assembly as per your requirements.

1 : $156.99
25 : $149.14
50 : $141.29
100 : $135.01

139

PE3W12434-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Female Bulkhead to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female bulkhead to NEX10 female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 bulkhead cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W12434-12 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W12434-12 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. NEX10 jack to NEX10 jack cable assembly PE3W12434-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack bulkhead to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.

1 : $96.29
25 : $91.48
50 : $86.66
100 : $82.81

PE3C4341-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Push-On SMP Female to Push-On SMP Female Cable 100 CM Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to push-on SMP female cable 100 cm length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to push-on SMP female cable 100 cm length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C4341-100CM, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4341-100CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to push-on SMP female cable 100 cm length using PE-SR405FL coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3C4341-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Push-On SMP Female to Push-On SMP Female Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to push-on SMP female cable 36 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to push-on SMP female cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C4341-36, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4341-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to push-on SMP female cable 36 inch length using PE-SR405FL coax.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE3C4341-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Push-On SMP Female to Push-On SMP Female Cable 200 CM Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to push-on SMP female cable 200 cm length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to push-on SMP female cable 200 cm length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C4341-200CM, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4341-200CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to push-on SMP female cable 200 cm length using PE-SR405FL coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

PE3C4341-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Push-On SMP Female to Push-On SMP Female Cable 24 Inch Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to push-on SMP female cable 24 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to push-on SMP female cable 24 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C4341-24, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4341-24 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to push-on SMP female cable 24 inch length using PE-SR405FL coax.

1 : $104.99
25 : $99.74
50 : $94.49
100 : $90.29

PE3C4341-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. Push-On SMP Female to Push-On SMP Female Cable 60 Inch Length Using PE-SR405FL Coax., Radio frequency assembly push-on SMP female to push-on SMP female cable 60 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to push-on SMP female cable 60 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMP cable connection on the other. Our SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C4341-60, can also be known as a SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C4341-60 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to push-on SMP female cable 60 inch length using PE-SR405FL coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W04341

Pasternack Enterprises

PE4341

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SSMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: None, Interface Type 1: Thru Hole. SSMB Jack Right Angle Connector Solder Attachment Thru Hole PCB, .100 inch x .031 inch Hole Spacing. PE4341 SSMB jack right angle pcb connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack SSMB jack connector uses shield/contact solder as an attachment method. The Pasternack right angle SSMB jack pcb connector has a PTFE dielectric type. The Pasternack SSMB pcb connector has a brass body with gold plating. This SSMB jack right angle pcb RF connector is RoHS and REACH compliant. This Pasternack right angle jack SSMB connector will ship the same day as purchased. Our SSMB right angle jack connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom SSMB connector cable assemblies that will ship the same day as well.
RoHS : Compliant

1 : $38.99
25 : $37.04
50 : $35.09
100 : $33.53

PE7434-10

Pasternack Enterprises

Key Specifications, Design: Continuously Variable, Maximum Frequency: 12.4 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.6:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 10 dB. 0 to 10 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 8 GHz to 12.4 GHz. PE7434-10 is a variable attenuator from Pasternack. This SMA microwave attenuator is a continuously variable attenuator design. Our coaxial 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack variable RF attenuator has a female gender for connector 1 and a SMA female for connector 2. PE7434-10 variable attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 10 dB. This microwave variable attenuator has frequency range of 8 GHz to 12.4 GHz and a maximum VSWR of 1.6:1. Our countinously variable attenuator is rated to 5 Watt at the stated attenuation. Our variable attenuator PE7434-10 is shipped same day as purchased from Pasternack's facility certified to ISO 9001:2015. This attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $2,240.0
5 : $2,150.4
10 : $2,060.8
25 : $1,971.2

PE3M0434-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: M17/113-RG316, RF Cable Type: Coax, RF Cable Specification: MIL-DTL-17, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Pin to MIL Size 12 Contact Socket Cable 12 Inch Length Using M17/113-RG316 Coax with Heat Shrink, LF Solder. The PE3M0434-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 pin contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 700 MHz. The PE3M0434-12 RF cable has a FEP jacket of 0.980-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 pin to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0434-12 in-series RF cable has 0.5 inches of repeated minimum bend radius. M39029 pin to M39029 socket cable assembly is built with M17/113-RG316, which is a flexible coax type. The Pasternack PE3M0434-12 flexible cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 pin to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3C4434-18

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 18 inches. SSMC Plug to TNC Male Low Loss Cable 18 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMC plug to TNC male low loss cable 18 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SSMC plug to TNC male low loss cable 18 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our low loss SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4434-18, can also be known as a low loss SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4434-18 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 500 MHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4434-18 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male low loss cable 18 inch length using LMR-100 coax.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41

PE3W24341

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Female to MHV Male Cable Using 53 Ohm RG55 Coax. PE3W24341 is a N female to MHV male cable using RG55 coax. This Pasternack N female to MHV male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MHV for connector 2. Our female N to male MHV cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W24341 N female to MHV male cable assembly is constructed with RG55 coax.

PE3C4434-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 12 inches. SSMC Plug to TNC Male Low Loss Cable 12 Inch Length Using LMR-100 Coax., Radio frequency assembly SSMC plug to TNC male low loss cable 12 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SSMC plug to TNC male low loss cable 12 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SSMC cable connection on one end and TNC cable connection on the other. Our low loss SSMC to TNC cable assemblies have a plug gender on end 1 and male on end 2. This SSMC to TNC cable is a plug to male coax assembly, PE3C4434-12, can also be known as a low loss SSMC male to TNC plug cable assembly and will be shipped same-day as it is purchased. SSMC male to TNC plug cable assembly PE3C4434-12 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with SSMC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 500 MHz maximum frequency SSMC plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4434-12 can also be used in the other direction and will be TNC male to SSMC plug cable assembly if the opposite connectivity is required. Low loss SSMC male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to TNC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug to TNC male low loss cable 12 inch length using LMR-100 coax.

1 : $74.89
25 : $71.15
50 : $67.4
100 : $64.41