| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
4314-R2 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Ameya Holding Limited | OPA4314AIPWR![]() | Texas Instruments | TSSOP 14/A°/Quad, 3MHz, Low-Power, Low-Noise, RRI/O, 1.8V CMOS Operational RoHS : Compliant | 34,291 | ||
OPA4314AQPWRQ1![]() | Texas Instruments | RoHS : Compliant | 30,347 | |||
| 24314 | Keystone Electronics Corp | Wrench; Torx®; TX06; Overall len: 80mm; Chrom-vanadium steel | 10,940 | |||
BZX79-B43,143![]() | Nexperia | SOD27/ZENERDIODE/12NC:933167020143 RoHS : Compliant | 2,460 | |||
BZX79-C43,143![]() | Nexperia | DIODE ZENER 43V 400MW ALF2 RoHS : Compliant | 2,356 | |||
![]() ComSIT USA | 9140043141 | HARTING Technology Group | AVAILABLE EU | 326 | ||
![]() NexGen Digital | 4314-147 | ebm-papst | 21 | |||
![]() PUI | 12.94314 | 4,430 | ||||
![]() Richardson RFPD | PE4314B-Z | QP Semiconductor | 6Bit 0.5dBStep 31.5dB 2.5GHz 20-Pin QFN EP T/R RoHS : Compliant |
| 274,265 | |
| R431411002 | Radiall | RF Hybrid Coupler RoHS : Not Compliant | 0 | |||
| R431411005 | Radiall | SMT HYBRID COUPLER 1.7 - 2.0 GHZ RoHS : Not Compliant | 0 | |||
| R431413002 | Radiall | SMT DIRECTIONAL COUPLER 10DB/1.7 - 2.0 GHZ RoHS : Not Compliant | 0 | |||
| R431413005 | Radiall | SMT DIRECTIONAL COUPLER 10DB/1.7 - 2.0 GHZ RoHS : Not Compliant | 0 | |||
| R431413001 | Radiall | SMT DIRECTIONAL COUPLER 10DB/1.7 - 2.0 GHZ RoHS : Not Compliant | 0 | |||
| 1431-4-LIM | Spectrum Control | RF COAX TERMINATION RoHS : Compliant |
| 0 | ||
| R124314120W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Panel Mount RoHS : Compliant |
| 0 | ||
| R431411203 | Radiall | RF Hybrid Coupler RoHS : Not Compliant | 0 | |||
| LTC4314CUDC#TRPBF | Analog Devices Inc | I2C Logic Buffer 3.3V/5V 20-Pin QFN EP T/R RoHS : Compliant |
| 0 | ||
| AC164314 | Microchip Technology Inc | dsPIC30F/PIC Microcontroller Socket Board RoHS : Compliant |
| 0 | ||
| ND431433 | Powerex Power Semiconductors | SCR 1400V 520A(RMS) 15310A 7-Pin RoHS : Compliant | 0 | |||
| 1431-4 | Spectrum Control | High Power N 3.5mm Connectors 100 Watts RoHS : Compliant |
| 0 | ||
| R431412005 | Radiall | SMT DIRECTIONAL COUPLER 6DB/1.7 - 2.0 GHZ RoHS : Not Compliant | 0 | |||
| SI5338B-B14314-GM | Skyworks Solutions Inc | SI5338B-B14314-GM RoHS : Compliant | 0 | |||
![]() Rutronik | Q22FA2380014314 | Seiko Epson Corporation | FA-238 25,000000M 18pF 50ppm RoHS : Compliant |
| 6,000 | |
![]() Braemac Americas-Symmetry | BGM220-EK4314A | Silicon Laboratories Inc |
| 0 | ||
![]() EBV Elektronik | IR5443-14C/L527 | Everlight Electronics Co Ltd | LED UniColor 940nm IrLED 2Pin T1 34 (Alt: L212000902) RoHS : Compliant | 0 | ||
![]() Flip Electronics | BCM43143KMLGT | Infineon Technologies AG | Stock, Ship Today |
| 7,500 | |
ICS84314AYLF![]() | Integrated Device Technology Inc | Stock RoHS : Compliant | 662 | |||
84314AYLF![]() | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant |
| 662 | ||
| IDT84314AYLF | Integrated Device Technology Inc | Stock | 662 | |||
![]() Neutron USA | 4314 | ebm-papst | DC Fan, 24V, 100.1CFM, 5W, 45dBA, 2800RPM, Wire Leads RoHS : Compliant |
| 50 | |
| 4314NH3 | ebm-papst | DC Fans DC Tubeaxial Fan, 119x119x32mm, 24VDC, 168CFM, 11W, 4100RPM, Ball Bearing, IP20 |
| 50 | ||
| 0431400000 | Weidmüller Interface GmbH & Co. KG | Cartridge Fuses G 20/6.30A/F RoHS : Compliant |
| 50 | ||
| 4314-51 | Norgren | Norgren 4314-51 Clamp for F73G Filters, Metal, Excelon Series |
| 50 | ||
| 09643147232 | HARTING Technology Group | D-Sub Standard Connectors 25P FEMALE RT ANGLE BOARDCLIP/CLINCH NUT RoHS : Compliant |
| 17 | ||
| 4314S | ebm-papst | DC Fans Size=119x119x32 mm CFM=100 VDC=24 RoHS : Compliant |
| 0 | ||
| 4314NNU | ebm-papst | DC Fans DC Tubeaxial Fan, 119x32mm, 24VDC, 112CFM, 4W, 41dBA, 2700RPM, IP68 |
| 0 | ||
| 350431-4 | TE Connectivity | Header; Conn; Interconnect System; PCB Plug; 6 Cont; Thru-Hole; 0.25" Pin-Spng; 2 Rows RoHS : Compliant |
| 0 | ||
| 124 314111 | White-Rodgers | Contactors - Electromechanical SPDT 24VDC |
| 0 | ||
| 4314/2 | ebm-papst | DC Fans SENSOR SIGNAL |
| 0 | ||
| 4314NH | ebm-papst | DC Fans Axial Fan, 119x32mm 24VDC, 130CFM, Ball RoHS : Compliant |
| 0 | ||
| 4314HR | ebm-papst | DC Fans DC TUBEAXIAL FAN |
| 0 | ||
| 4314NHH | ebm-papst | DC Fans Axial Fan, 119x32mm 24VDC, 147CFM, Ball |
| 0 | ||
| 4314NL | ebm-papst | DC Fans Axial Fan, 119x32mm 24VDC, 59CFM, Ball RoHS : Compliant |
| 0 | ||
| 556-1904-314F | Dialight | LED Panel Mount Indicators Flat Orange 24 VDC 46mA 1200fL Clear RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C7431-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to Straight Cut Lead Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly TNC male right angle to straight cut lead low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to straight cut lead low loss cable 48 inch length using LMR-195 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and straight cut lead cable connection on the other. Our low loss right angle TNC to straight cut lead cable assemblies have a male gender on end 1 and sexless on end 2. PE3C7431-48 can also be known as a low loss right angle TNC plug to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. TNC plug to straight cut lead sexless cable assembly PE3C7431-48 is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to straight cut lead cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7431-48 can also be used in the other direction and will be straight cut lead sexless to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to straight cut lead cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to straight cut lead low loss cable 48 inch length using LMR-195 coax. |
| 1,442 | |
| PE44314 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: F, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Twist, Mount Method: None, Interface Type 1: RG6. 75 Ohm F Male Connector Twist Attachment for RG6. PE44314 type F male coaxial connector has an interface type of RG6 and a 75 Ohm impedance. Pasternack type F male connector uses shield/contact twist as an attachment method. The Pasternack type F coaxial connector has a brass body with nickel plating. This F type male coaxial RF connector is RoHS and REACH compliant. This Pasternack male F type connector will ship the same day as purchased. Our type F male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type F connector cable assemblies that will ship the same day as well. |
| 241 | ||
| PE34431-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MHV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 48 inches. MHV Male to MHV Male Cable 48 Inch Length Using RG188 Coax., Radio frequency assembly MHV male to MHV male cable 48 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MHV male to MHV male cable 48 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MHV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MHV cable connection on one end and MHV cable connection on the other. Our MHV to MHV cable assemblies have a male gender on end 1 and male on end 2. This MHV to MHV cable is a male to male coax assembly, PE34431-48, can also be known as a MHV plug to MHV plug cable assembly and will be shipped same-day as it is purchased. MHV plug to MHV plug cable assembly PE34431-48 is built with RG188 which is a flexible coax type. The Pasternack flexible MHV cable assembly is manufactured with MHV to MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MHV male to MHV male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MHV plug to MHV plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MHV to MHV cable assembly for quick shipment worldwide. Variations of MHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MHV male to MHV male cable 48 inch length using RG188 coax. |
| 188 | ||
| PE34314/HS-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. TNC Male Right Angle to SMA Male Cable 6 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly TNC male right angle to SMA male cable 6 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to SMA male cable 6 inch length using RG316-DS coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE34314/HS-6 can also be known as a right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE34314/HS-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34314/HS-6 can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male cable 6 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE3431-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Female Bulkhead Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC female bulkhead cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC female bulkhead cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC bulkhead cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3431-48, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3431-48 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3431-48 can also be used in the other direction and will be BNC female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC female bulkhead cable 48 inch length using RG174 coax. |
| 0 | ||
| PE3C4314LF-12 | Pasternack Enterprises |
| 0 | |||
| PE34314/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male Right Angle to SMA Male Cable 24 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly TNC male right angle to SMA male cable 24 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to SMA male cable 24 inch length using RG316-DS coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE34314/HS-24 can also be known as a right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE34314/HS-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34314/HS-24 can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male cable 24 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE34314/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male Right Angle to SMA Male Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly TNC male right angle to SMA male cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to SMA male cable 12 inch length using RG316-DS coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE34314/HS-12 can also be known as a right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE34314/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34314/HS-12 can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male cable 12 inch length using RG316-DS coax with heatshrink. |
| 0 | ||
| PE3C4314-48 | Pasternack Enterprises |
| 0 | |||
| PE3C4314-18 | Pasternack Enterprises |
| 0 | |||
| PE34314/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to SMA Male Cable Using RG316-DS Coax with HeatShrink., Radio frequency assembly TNC male right angle to SMA male cable using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to SMA male cable using RG316-DS coax with heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE34314/HS can also be known as a right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE34314/HS is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34314/HS can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male cable using RG316-DS coax with heatshrink. | 0 | |||
| PE3C4314-6 | Pasternack Enterprises |
| 0 | |||
| PE3C4314LF-48 | Pasternack Enterprises |
| 0 | |||
| PE3W04314 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using RG188 Coax. PE3W04314 is a SMA male right angle to SMA male cable using RG188 coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04314 SMA male right angle to SMA male cable assembly is constructed with RG188 coax. | 0 | |||
| PE3C4314-24 | Pasternack Enterprises |
| 0 | |||
![]() TE Connectivity | 3-2106431-4 | TE Connectivity | Connector, SMT-IDC PASS THRU, 4 POS, 24 Connector System: Wire-to-Board Number of Positions: 4 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 4 4" .16 mm | Poke-In Connector | Part Number: 3-2106431-4 | Internal Number: 3-2106431-4 | 4" | TE Connectivity RoHS : Compliant |
| 3,715 | |
| 350431-4 | TE Connectivity | 06P UMNL PINHDR ASSY V2 NAT LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 350431-4 | Internal Number: 350431-4 | TE Connectivity RoHS : Compliant |
| 1,966 | ||
| 3-640431-4 | TE Connectivity | 04P MTA156 CONN ASSY 18AWG ORA Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: Without Standard Rectangular Connector | 4 Receptacle Connector Assembly Without | Part Number: 3-640431-4 | Internal Number: 3-640431-4 | TE Connectivity RoHS : Compliant |
| 1,296 | ||
| 2-2106431-4 | TE Connectivity | Connector, SMT-IDC PASS THRU, 4 POS, 22 Connector System: Wire-to-Board Number of Positions: 4 Centerline (Pitch): .16 in Centerline (Pitch): 4 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 4 .16" 4 mm | Poke-In Connector | Part Number: 2-2106431-4 | Internal Number: 2-2106431-4 | .16" | TE Connectivity RoHS : Compliant |
| 1,035 | ||
| 2106431-4 | TE Connectivity | Connector, SMT-IDC PASS THRU, 4 POS, 18 Connector System: Wire-to-Board Number of Positions: 4 Centerline (Pitch): 4 in Centerline (Pitch): .16 mm Connector & Contact Terminates To: Printed Circuit Board Wire-to-Board 4 4" .16 mm | Poke-In Connector | Part Number: 2106431-4 | Internal Number: 2106431-4 | 4" | TE Connectivity RoHS : Compliant |
| 372 | ||
![]() Waytek, Inc. | 124-911 124-314111 | White-Rodgers | Power Relay Contactor 24V 100A SPDT White-Rodgers 124-911 400A INRUSH ISOLATED COIL |
| 33 | |
![]() Win Source Electronics | OPA4314AIPW![]() | Texas Instruments | IC CMOS 4 CIRCUIT 14TSSOP / CMOS Amplifier 4 Circuit Rail-to-Rail 14-TSSOP RoHS : Compliant |
| 89,000 | |
| 744314101 | Wurth Elektronik | FIXED IND 10UH 3.5A 33 MOHM SMD RoHS : Compliant |
| 80,000 | ||
| 744314330 | Wurth Elektronik | WE-HCI SMD Flat Wire High Current Inductor | FIXED IND 3.3UH 9A 9 MOHM SMD RoHS : Compliant |
| 52,913 | ||
| PE4314B-Z | pSemi | RF ATTENUATOR 31.5DB 75OHM 20QFN RoHS : Compliant |
| 34,893 | ||
OPA4314AIPWR![]() | Texas Instruments | IC OPAMP GP 3MHZ RRO 14TSSOP RoHS : Compliant |
| 25,000 | ||
TLV4314IPWR![]() | Texas Instruments | 3-MHz, Low-Power, Internal EMI Filter, RRIO, Operational Amplifier | IC CMOS 4 CIRCUIT 14TSSOP RoHS : Compliant |
| 21,000 | ||
| 744314150 | Wurth Elektronik | WE-HCI SMD Flat Wire High Current Inductor | FIXED IND 1.5UH 13A 4.3 MOHM SMD RoHS : Compliant |
| 5,806 | ||
| 744314650 | Wurth Elektronik | WE-HCI SMD Flat Wire High Current Inductor | FIXED IND 6.5UH 6A 21.5 MOHM SMD RoHS : Compliant |
| 5,026 | ||
| 744314850 | Wurth Elektronik | FIXED IND 8.5UH 4A 32.5 MOHM SMD RoHS : Compliant |
| 3,000 | ||
| LTC4314IUDC#PBF | Analog Devices Inc | IC MULTIPLEXER I2C HOTSWAP 20QFN / Buffer, Multiplexer 1 x 1:4 Channel 400kHz 20-QFN (3x4) RoHS : Compliant |
| 2,150 | ||
| TG43-1406N | Halo Electronics Inc |
| 906 | |||
| TG43-1406NTR | Halo Electronics Inc |
| 850 | |||
| TG43-1406NRLTR | Halo Electronics Inc | Telecom Transformer 1: 1: 1: 1.41 1500Vrms 0.3Ohm Prim. DCR Surface Mount RoHS : Compliant |
| 830 | ||
LTC4314IGN#PBF![]() | Linear Technology | IC MULTIPLEXR I2C HOTSWAP 20SSOP RoHS : Compliant |
| 630 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |