 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
261T-B-4P40-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Maritex | 532611571 | Molex | Male Pin Headers; 532611571; MOLEX; 1; Tin; 15; 15 RoHS : Compliant |
| 25,934 | |
| TP2261-TR | 3peak Incorporated | Operational Amplifiers; TP2261-TR; 3PEAK; 4 mV; 40 V RoHS : Compliant |
| 5,962 | ||
| RI0402L2612FT | Guangdong Hottech Industrrial Co | Chip Resistor; SMD; 0402; 26.1k; 1%; 1/16W |
| 5,000 | ||
| 526100533 | Molex | FFC/FPC Connectors; 526100533; MOLEX; Tin; Vertical; 1 A; Surface Mount |
| 2,925 | ||
| TGS2611-C00 | FIGARO Engineering Inc | MOS-type methane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 1,511 | ||
| JS-1261R-12 | Chyao Shiunn Electronic Industrial Ltd | Header for PCB; pitch 2.00mm; 12-contacts; SMD; male; side entry; 100V/2A |
| 946 | ||
| JS-1261R-08 | Chyao Shiunn Electronic Industrial Ltd | Header for PCB; pitch 2.00mm; 8-contacts; SMD; male; side entry; 100V/2A |
| 874 | ||
| RC1608F2613CS | Samsung Electro-Mechanics | Chip Resistor; SMD; 0603; 261K; 1%; 1/10W RoHS : Compliant |
| 860 | ||
| 66261-2 | TE Connectivity | Multi-Purpose Contacts; 66261-2; TE CONNECTIVITY; Gold; Crimp; Copper; 35 A RoHS : Compliant |
| 108 | ||
| MIC-EMM4030-261 | CONNTHERM | Microphone MEMS digital 1-bit PDM; suppy: 1.6-3.6V; sensitivity: -26dB; dimensions: 4.0x3.0x1.1mm; montage: SMD |
| 50 | ||
| 1-1564526-1 | TE Connectivity | Automotive Connectors; 1-1564526-1; TE CONNECTIVITY; Black; 18; Yes; 62.5 mm RoHS : Compliant |
| 11 | ||
| 10402614-02 | BARANTECH | Piezoelectric switch; monostable; 16mm; cable; stainless steel STS316; 24V AC/DC. |
| 5 | ||
| TGS2616-C00 | FIGARO Engineering Inc | MOS-Type hydrogen gas sensor; range: 10-3000ppm; supply: 5V; power: 280mW; |
| 5 | ||
TPS259261DRCR | Texas Instruments | Power Management ICs (PMICs); TPS259261DRCR; TEXAS INSTRUMENTS; 10; 3 mm; 1 mm RoHS : Compliant |
| 4 | ||
| LPM2610-D09 | FIGARO Engineering Inc | MOS-type butane, propane gas sensor; range: alarm set point 1250ppm; supply: 5V; power: 280 mW |
| 1 | ||
 Pasternack Enterprises US | PE3C2614/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Low Loss Cable Using LMR-240-DB Coax with Times Microwave Components with HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable using LMR-240-DB coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable using LMR-240-DB coax with Times Microwave components with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2614/HS can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2614/HS is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable using LMR-240-DB coax with Times Microwave components with heatshrink. | 10,530 | ||
| PE3426-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Male Right Angle Cable 12 Inch Length Using RG142 Coax., Radio frequency assembly SMA male to N male right angle cable 12 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N male right angle cable 12 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle N type cable connection on the other. Our SMA to right angle type N cable assembly has male gender on end 1 and male on end 2. PE3426-12 can also be known as a SMA plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMA plug to type N plug cable assembly PE3426-12 is built with RG142 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3426-12 RF cable are available on our downloadable PDF datasheet.PE3426-12 can also be used in the other direction and will be right angle type N male to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 2,022 | ||
| PE3C6261 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum Snap-On 4.3-10 Male to NEX10 Male Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-250-XNM-LP NEX10 cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-250-XNM-LP NEX10 cable is a male to male coax assembly, PE3C6261, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-XNM-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-XNM-LP NEX10 plug cable assembly PE3C6261 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-250-XNM-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-250-XNM-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6261 can also be used in the other direction and will be TC-250-XNM-LP NEX10 male to TC-SPP250-4310MS-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-250-XNM-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-250-XNM-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to NEX10 male low PIM cable using SPP-250-LLPL coax using Times Microwave parts. | 666 | |||
| PE3W12619LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-LW600 Coax, LF Solder., Radio frequency assembly N male to N male low loss cable using LMR-LW600 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-LW600 coax, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12619LF can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W12619LF is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-LW600 coax, LF solder. | 597 | |||
| PE3W12619 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-LW600 Coax., Radio frequency assembly N male to N male low loss cable using LMR-LW600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-LW600 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12619 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W12619 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable using LMR-LW600 coax. | 597 | |||
| PE3W12619-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to N Male Low Loss Cable 72 Inch Length Using LMR-LW600 Coax., Radio frequency assembly N male to N male low loss cable 72 inch length using LMR-LW600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 72 inch length using LMR-LW600 coax, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12619-72 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W12619-72 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 72 inch length using LMR-LW600 coax. |
| 161 | ||
| PE2CP1126-10 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: 2.92mm, Connector Gender: Female, Minimum Frequency: 18 GHz, Maximum Frequency: 40 GHz, Maximum Input Power: 30 Watt, Coupling Value: 10 dB. Directional 10 dB 2.92mm Coupler From 18 GHz to 40 GHz Rated to 30 Watts. RF coupler part number PE2CP1126-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with 2.92mm ports. Our directional coupler design uses 2.92mm ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 18 GHz and a maximum frequency of 40 GHz. Directional coupler part # PE2CP1126-10 is constructed with a coupling value of 10 dB and a coupler directivity of 12 dB. This female 2.92mm directional coupler is built with a maximum insertion loss of 1.6 dB and a maximum input power of 30 watts. Our directional coupler design with 2.92mm connector is rated for a maximum insertion loss of 1.6 dB and a maximum VSWR of 1.6. Additional female 2.92mm coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1126-10 directional 10 dB 2.92mm coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 2 | ||
| PE3C10261-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Low Loss Cable 24 Inch Length Using 75 Ohm LMR-400-75 Coax With Times Microwave Components., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male low loss cable 24 inch length using 75 Ohm LMR-400-75 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss a BNC to a BNC cable assembly has male gender on end 1 and male on end 2. PE3C10261-24 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has beryllium copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10261-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to BNC plug cable assembly PE3C10261-24 is built with LMR-400-75 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors and has a 75 Ohm impedance. Both the connectors have a crimp attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C10826-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047HF, RF Cable Type: PE-P047HF, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMPS Female VITA 67.3 Cable 18 Inch Length Using PE-P047HF Coax., Pasternack’s PE3C10826-18 VITA 67.3 SMA male to SMPS female RF cable assembly using PE-P047HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMPS female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMPS cable assembly orders will ship the same business day as well. Pasternack RF coax VITA 67.3 cable assembly is built with an SMA cable connection on one end and an SMPS cable connection on the other. Our SMA to SMPS cable assembly has a male gender on end 1 and a female on end 2. PE3C10826-18 can also be known as a VITA 67.3 SMA plug to SMPS jack cable assembly and will be shipped the same day as it is purchased. This high flex RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. Our VITA 67.3 cable is designed for use in high-density RF signal transmission applications in aerospace and defense, ground communication systems, radar systems, satellites, and embedded computing applications. This cable assembly employs durable and flexible materials, and with a 0.1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10826-18 RF cable has an FEP jacket of 0.060-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The high flex RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our SMA male to SMPS female cable has a maximum VSWR of 1.4:1. This PE3C10826-18 SMA plug to SMPS jack cable assembly is built with PE-P047HF, which is a high flex coax type. The Pasternack high flex SMA cable assembly is manufactured with SMA to SMPS cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with gold plating, while the other has the solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long VITA 67.3 RF cable are available on our downloadable PDF datasheet. PE3C10826-18 can also be used in the other direction and will be an SMPS female to SMA male cable assembly if the opposite connectivity is required. This VITA 67.3 SMA plug to SMPS jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMPS cable assembly for quick shipment worldwide. Variations of SMA and SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMPS VITA 67.3 RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12613 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to 2.4mm Female Cable Using PE-SR405FLJ Coax. PE3W12613 is a SMA male to 2.4mm female cable using PE-SR405FLJ coax. This Pasternack SMA male to 2.4mm female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male SMA to female 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W12613 SMA male to 2.4mm female cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W12617/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Cable Using LMR-600-UF Coax with HeatShrink. PE3W12617/HS is a N female bulkhead to N male cable using LMR-600-UF coax. This Pasternack N female bulkhead to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12617/HS N female bulkhead to N male cable assembly is constructed with LMR-600-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W13261 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. MCX Plug Right Angle to SMB Jack Bulkhead Cable Using RG174 Coax. PE3W13261 is a MCX plug right angle to SMB jack bulkhead cable using RG174 coax. This Pasternack MCX plug right angle to SMB jack bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMB for connector 2. MCX right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MCX right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13261 MCX plug right angle to SMB jack bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE33261LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50. SMB Plug Right Angle to SMB Jack Bulkhead Cable Using RG174 Coax, RoHS. PE33261LF is a SMB plug right angle to SMB jack bulkhead cable using RG174 coax. This Pasternack SMB plug right angle to SMB jack bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33261LF SMB plug right angle to SMB jack bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE33261LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMB Plug Right Angle to SMB Jack Bulkhead Cable 12 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly SMB plug right angle to SMB jack bulkhead cable 12 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SMB jack bulkhead cable 12 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SMB bulkhead cable connection on the other. Our right angle SMB to SMB cable assemblies have a plug gender on end 1 and jack on end 2. This SMB to SMB cable is a plug to jack coax assembly, PE33261LF-12, can also be known as a right angle SMB male to SMB female cable assembly and will be shipped same-day as it is purchased. SMB male to SMB female cable assembly PE33261LF-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33261LF-12 can also be used in the other direction and will be SMB jack bulkhead to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SMB jack bulkhead cable 12 inch length using RG174 coax, RoHS. |
| 0 | ||
| PE3W00261 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50. N Male to SMA Male Cable Using LMR-240 Coax. PE3W00261 is a N type male to SMA male cable using LMR-240 coax. This Pasternack type N male to SMA male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm SMA for connector 2. Our male N type to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00261 type N male to SMA male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
 Teledyne HiRel | 5962-8872610LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
5962-88726103A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88726113A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8872612LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8872611LA | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 15 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-88726123A | Teledyne HiRel | PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 25 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | MELFC0102-RZ-2612BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�15PPM;26.1K;�0.1% RoHS : Compliant | 0 | ||
| MELFC0102-YE-2261DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;2.26K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TC-2610FT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;261R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-2610BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;261R;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-TZ-2610CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;261R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-2610DT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZK-2614FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�100PPM;2.61M;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VC-2611FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;2.61K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-2611BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;2.61K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VN-2261BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�10PPM;2.26K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VZ-2611CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�15PPM;2.61K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-XN-2610DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;261R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XZ-2612BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�15PPM;26.1K;�0.1% RoHS : Compliant | 0 | |||
| MELFM0204-TE-2612FT | VENKEL LTD | MELF Molded Thin Film CR;0204;1/4W;�25PPM;26.1K;�1% RoHS : Not Compliant | 0 | |||
| MELFM0204-ZE-2612DT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�25PPM;26.1K;�0.5% RoHS : Not Compliant | 0 | |||
 Vyrian | 1932614 | Phoenix Contact | Barrier Strip Terminal Block, 125A, 35mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,122 | ||
| 1-102617-0 | TE Connectivity | Board Connector, 24 Contact(s), 2 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle RoHS : Not Compliant | 11,713 | |||
| 0826-1X1T-GH-F | Bel Fuse | Telecom and Datacom Connector, 8 Contact(s), Female, Right Angle, Solder Terminal, Locking RoHS : Compliant | 11,144 | |||
V62/12610-02XE | Texas Instruments | Operational Amplifier, 2 Func, 250uV Offset-Max, PDSO8 | 7,631 | |||
OPA2613IDTJRG3 | Texas Instruments | Operational Amplifier, 2 Func, BIPolar, PDSO8 RoHS : Compliant | 5,996 | |||
| CT126163 | Micron Technology, Inc | 5,953 | ||||
MSP430F2617TZQW | Texas Instruments | RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 16MHz, CMOS, PBGA113 RoHS : Compliant | 5,933 | |||
| HDC26-18 | TE Connectivity | Connector Accessory RoHS : Compliant | 5,610 | |||
| OPA2613IDTJR | Texas Instruments | Operational Amplifier, 2 Func, BIPolar, PDSO8 RoHS : Compliant | 5,548 | |||
CS8126-1YT5G | onsemi | Fixed Positive LDO Regulator, 5V, 0.6V Dropout, BIPolar, PSFM5 RoHS : Compliant | 4,891 | |||
LM2614ATLX | Texas Instruments | Switching Regulator, Current-mode, 0.85A, 1000kHz Switching Freq-Max, PBGA10 | 4,657 | |||
SMJ626162-15HKD | Texas Instruments | Synchronous DRAM, 1MX16, 9ns, CMOS, CDFP50 RoHS : Not Compliant | 3,968 | |||
V62/12619-01XE | Texas Instruments | Operational Amplifier, 1 Func, 100uV Offset-Max, BIPolar, PDSO8 RoHS : Compliant | 3,782 | |||
| MT4C1026-12 | Micron Technology Inc | Static Column DRAM, 1MX1, 120ns, CMOS, PDIP18 RoHS : Not Compliant | 2,788 | |||
| MM8430-2610B | Murata Manufacturing | RF Connector, 1 Contact(s), Female, Board Mount, Surface Mount Terminal, Receptacle | 733 | |||
 Waytek, Inc. | 2617 | Heyco | Heyco 2617 locking hole plug is a snap-in panel plug designed to close unused .375"openings while providing a clean finished appearance. Its locking design supports secure retention, helps block dirt and debris, and improves panel protection in electrical and equipment enclosures. RoHS : Compliant |
| 18,992 | |
| 19193-0261 | Molex | 4 GA 1/4" Ring Terminal Non-Insulated Brazed RoHS : Compliant |
| 5,030 | ||
| 12052613 | Aptiv PLC | 2-Way Metri-Pack 480 Connector Female DELPHI # 12052613 RoHS : Compliant |
| 1,493 | ||
| 261G2-LPBK | Anderson Power Products | 14-10 GA Powerpole Contact 45 AMP, Anderson ANDERSON 261G2-LPBK RoHS : Compliant |
| 1,443 | ||
| 3261 | Heyco | Sealing Washer 3/4 NPT Thermoplastic Elastomer |
| 1,286 | ||
| 52-613 | Pollak | Pollak 52-613 PVC coated momentary start switch is a normally off Off-(On) push-button start switch with an 8" 14 Ga. wire loop. Rated 25A, it provides spring-return momentary operation with a protective PVC coating for vehicle start circuits. |
| 227 | ||
| 1684126121208 | Trombetta | 12V Powerseal DC Relay Contactor 4 Terminals |
| 167 | ||
| 52-611 | Pollak | Pollak 52-611 momentary start switch is a normally off Off-(On) push-button start switch with two #8 screw contacts. It is rated 25A for vehicle starting circuits and provides spring-return momentary operation for compact panel-mounted engine start control. |
| 115 | ||
| 684-1261-032-02 | Trombetta | Sealed 12V DC Contactor Continous Duty, Curved L-Bracket Silver Contacts |
| 89 | ||
 Win Source Electronics | 53261-0971 | Molex | 53261-0971 Molex Headers & Wire Housings PicoBlade1.25 SMT RA PKG 9P datasheet, inventory, & pricing. RoHS : Compliant |
| 29,800 | |
TPS61261DRVT | Texas Instruments | IC REG BOOST 3.3V 0.1A SYNC 6SON / Conv DC-DC 0.8V to 4V Step Up Single-Out 1.8V to 4V 0.1A 6-Pin WSON EP T/R RoHS : Compliant |
| 28,074 | ||
| TPS259261DRCR | Texas Instruments | IC EFUSE 12V BFET DVR 5A 10VSON / Simple 5V/12V eFuse Protection Switches RoHS : Compliant |
| 27,900 | ||
| 53261-0671 | Molex | RoHS : Compliant |
| 26,427 | ||
| MIC2619YD6-TR | Microchip Technology Inc | IC REG BOOST ADJ 0.35A TSOT23-6 RoHS : Compliant |
| 21,000 | ||
| 53261-1071 | Molex | Friction Lock Plug and Receptacle and SMT Header RoHS : Compliant |
| 20,590 | ||
| 1-390261-2 | TE Connectivity | CONN IC DIP SOCKET 8POS TIN / 8 (2 x 4) Pos DIP, 0.3" (7.62mm) Row Spacing Socket Tin Through Hole RoHS : Compliant |
| 17,396 | ||
MSP430F2618TPM | Texas Instruments | MCU 16-bit MSP430 RISC 116KB Flash 2.5V/3.3V 64-Pin LQFP Tray / MIXED SIGNAL MICROCONTROLLER RoHS : Compliant |
| 12,000 | ||
TUSB9261IPVP | Texas Instruments | Super Speed USB 3.0 to SATA Bridge USB 3.0 1.1V/3.3V Tray 64-Pin HTQFP EP / USB 3.0 TO SATA BRIDGE | IC USB3 TO SATA-II BRDGE 64HTQFP RoHS : Compliant |
| 11,250 | ||
| SI8261ACC-C-IS | Skyworks Solutions Inc | DGTL ISO 3.75KV GATE DRVR 8SOIC RoHS : Compliant |
| 9,000 | ||
LM2611BMFX | Texas Instruments | IC REG CUK INV ADJ 1.2A SOT23-5 RoHS : Not Compliant |
| 6,240 | ||
| CP2615-A02-GM | Silicon Laboratories Inc | IC USB TO I2S BRIDGE 32QFN |
| 3,000 | ||
| ADUM261N0BRIZ-RL | Analog Devices Inc | DGTL ISO 5000VRMS 6CH GP 16SOIC RoHS : Compliant |
| 2,770 | ||
| MAX17261MEWL+T | Maxim Integrated Products | IC BATT LIFEPO4/LI-ION 1C 9WLP / Battery Battery Monitor IC LiFePO4/Li-ion 9-WLP (1.47x1.45) RoHS : Compliant |
| 2,354 | ||
| MAX2615ETA/V+T | Maxim Integrated Products | IC RF AMP GPS 40MHZ-4GHZ 8TDFN RoHS : Compliant |
| 950 | ||
 Wuhan P&S | FDC2612 | onsemi | N-CH PowerTrenchMOSFET 200V,1.1A,725m�� RoHS : Compliant |
| 66,000 | |
| 10025026-10002TLF | Amphenol FCi | PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P RoHS : Compliant |
| 1,200 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand