2566U-R Price, nhà phân phối, Stock

2566U-R nhà phân phối

nhà phân phối

tên linh kiện

nhà sản xuất

Giải thích chi tiết về linh kiện

Price

Qty.
BuyNow

ComSIT USA

XC2C2566CPG132C

AMD Xilinx

COOLRUNNER-II CPLD Flash PLD, 6ns, 256-Cell, CMOS, PBGA132
RoHS : Compliant

309

CY37256VP25666BI

Cypress Semiconductor

Electronic Component
RoHS : Not Compliant

222

C82566

Intel Corporation

Electronic Component
RoHS : Not Compliant

B25668A6836A375

TDK Electronics

WINDCAP FILM CAPACITOR FOR POWER FACTOR CORRECTION Film Capacitor, Polypropylene, 10% +Tol, 5% -Tol, 3.28uF, Stud Mount
RoHS : Not Compliant

B25667J6336A375

S+M Components

CAP FILM Radial
RoHS : Not Compliant

Rutronik

RF2566-000

Littelfuse Inc

RXEF040 0.4A 72V Resettable
RoHS : Compliant

500 : $0.2576
1,000 : $0.2388
1,500 : $0.2365
2,000 : $0.2365
3,500 : $0.2365

10,000

Avnet Silica

22566

Allied Vision Technologies GmbH

2x MIPI CSI2 Adapter Board for MSC SM2SMBEP5 (Alt: 22566)
RoHS : Compliant

DB Roberts

FHL-256-6ZI

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

1 : $0.0706
100 : $0.0653
500 : $0.0571
1,000 : $0.0544
5,000 : $0.0528

STKB-256-6

Standard Insert

Uniform knurl diameter reduces the risk of sink marks.Available in varying lengths for injection molding assemblies.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

10,000 : $0.1601

2256-632-SS

RAF Electronic Hardware

TSO-6256-625ZI

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types TSO TSOS and TSOA self-clinching threaded standoffs provide permanent thre

TSOA-256-625

PennEngineering (PEM)

STKA-256-6

Standard Insert

10,000 : $0.0949

12SWS2566

Essentra Components

SHOULDER WASHER, .250 ID, .740

2256-632-AL

RAF Electronic Hardware

HEX FEMALE STANDOFF 3/8 HEX X 1-5/8 LENGTH

IBA-256-6

Standard Insert

Blind-end protects the threads from plastic intrusion.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

IBC-256-6

Standard Insert

Blind-end protects the threads from plastic intrusion.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

10,000 : $0.2911

TFHS-256-6

PennEngineering (PEM)

TSOA-6256-687

PennEngineering (PEM)

FHLS-256-6

PennEngineering (PEM)

TSOA-256-687

PennEngineering (PEM)

STKC-256-6

Standard Insert

10,000 : $0.2803

EBV Elektronik

2T1040NK008U22566

Infineon Technologies AG

Thyristors Triacs (Alt: SP000090792)
RoHS : Compliant

SGM2566BGTDE8G/TR

SG Micro Corp

(Alt: SGM2566BGTDE8G/TR)
RoHS : Compliant

SGM25661YTGB8G/TR

SG Micro Corp

(Alt: SGM25661YTGB8G/TR)
RoHS : Compliant

SGM2566CGTDE8G/TR

SG Micro Corp

(Alt: SGM2566CGTDE8G/TR)
RoHS : Compliant

SGM2566AGTDE8G/TR

SG Micro Corp

(Alt: SGM2566AGTDE8G/TR)
RoHS : Compliant

SGM25662GTGB8G/TR

SG Micro Corp

(Alt: SGM25662GTGB8G/TR)
RoHS : Compliant

TCD2566BFG(Z,T,C)

Toshiba America Electronic Components

Image Sensor BWColor CCD 22Pin CLCC (Alt: TCD2566BFG(Z,T,C))
RoHS : Compliant

FDH Electronics

M22759/32-22-5/6-.667"

Whitmore/Wirenetics

Hook-Up Wire

905

MS25256-6

Dialight

Uncategorized

1 : $69.12
5 : $69.12
10 : $54.0
25 : $36.766
50 : $36.766
100 : $33.231
250 : $27.429
500 : $27.429
1,000 : $27.429
2,500 : $27.429
10,000 : $27.429

M85049/25-66N

Glenair Inc

Connector
RoHS : Compliant

1 : $1,133.073
5 : $1,056.254
10 : $944.227
25 : $930.134
50 : $930.134
100 : $916.456
250 : $890.271
500 : $865.542
1,000 : $853.685
2,500 : $853.685
10,000 : $853.685

M85049/25-66N

Amphenol PCD

Backshells & Ac

1 : $175.505
5 : $175.505
10 : $154.858
25 : $146.255
50 : $146.255
100 : $141.031
250 : $136.168
500 : $136.168
1,000 : $131.629
2,500 : $131.629
10,000 : $127.383

M3933/25-66N

Amphenol SV Microwave

RF / Coaxial

1 : $189.757
5 : $189.757
10 : $175.596
25 : $156.865
50 : $156.865
100 : $150.832
250 : $147.061
500 : $147.061
1,000 : $147.061
2,500 : $147.061
10,000 : $147.061

CHA-0048-003CS2566

TE Connectivity

MTC Products

1 : $620.501
5 : $620.501
10 : $547.501
25 : $517.084
50 : $517.084
100 : $498.617
250 : $481.423
500 : $481.423
1,000 : $465.375
2,500 : $465.375
10,000 : $450.363

M85049/25-66W

Amphenol PCD

Backshells & Ac

1 : $193.177
5 : $193.177
10 : $170.45
25 : $160.981
50 : $160.981
100 : $155.232
250 : $149.879
500 : $149.879
1,000 : $144.883
2,500 : $144.883
10,000 : $140.209

M85049/25-66W

Glenair Inc

Connector

1 : $1,250.145
5 : $1,165.39
10 : $1,041.788
25 : $1,026.239
50 : $1,026.239
100 : $1,011.147
250 : $982.257
500 : $954.972
1,000 : $941.89
2,500 : $941.89
10,000 : $941.89

M85049/25-66Z

Glenair Inc

Connector
RoHS : Compliant

1 : $1,242.964
5 : $1,158.695
10 : $1,035.803
25 : $1,020.343
50 : $1,020.343
100 : $1,005.338
250 : $976.614
500 : $949.486
1,000 : $936.479
2,500 : $936.479
10,000 : $936.479

M3933/25-66S

Amphenol SV Microwave

Attenuator

1 : $283.518
5 : $283.518
10 : $262.36
25 : $234.375
50 : $234.375
100 : $225.36
250 : $219.726
500 : $219.726
1,000 : $219.726
2,500 : $219.726
10,000 : $219.726

CM1-B2-56-625-201-A

Carling Technologies

Circuit Protect

Maritex

3-125-661

Schurter Electronic Components

Accessories for power input connectors; 3-125-661; 2022-06-23
RoHS : Compliant

1,000 : $0.798
600 : $0.877
500 : $0.91
250 : $1.023
100 : $1.169
50 : $1.284
20 : $1.435
10 : $1.547
5 : $1.668
1 : $1.9591

200

3-125-663

Schurter Electronic Components

Accessories for power input connectors; 3-125-663; 2022-06-23
RoHS : Compliant

1,250 : $0.693
1,000 : $0.703
500 : $0.829
250 : $0.959
200 : $1.003
100 : $1.131
50 : $1.261
20 : $1.43
10 : $1.555
1 : $1.9796

3-125-665

Schurter Electronic Components

Accessories for power input connectors; 3-125-665
RoHS : Compliant

500 : $2.266
250 : $2.366
150 : $2.463
100 : $2.555
50 : $2.737
25 : $2.939
10 : $3.184
1 : $3.4707

3-125-662

Schurter Electronic Components

Accessories for power input connectors; 3-125-662
RoHS : Compliant

1,000 : $1.266
500 : $1.376
250 : $1.486
200 : $1.522
100 : $1.634
50 : $1.752
30 : $1.849
20 : $1.936
10 : $2.082
1 : $2.4272

Master Electronics

FFSD-15-D-25.66-01-N

Samtec Inc

RoHS : Compliant

250 : $14.49
100 : $16.34
50 : $19.0
25 : $19.57
10 : $20.17
5 : $21.15
1 : $22.6

3-125-662

Schurter Electronic Components

RC320-02 Rear Cover - protects against unintentional contact with live terminals
RoHS : Compliant

7,500 : $1.12
5,000 : $1.13
2,500 : $1.23
1,000 : $1.28
500 : $1.41
250 : $1.48
100 : $1.52
30 : $1.82

ZLTMM-125-66-F-D-425

Samtec Inc

RoHS : Compliant

1,000 : $3.97
500 : $5.53
250 : $6.15
100 : $6.7
50 : $9.13
25 : $9.56
5 : $10.55

ZLTMM-125-66-F-D-470

Samtec Inc

RoHS : Compliant

1,000 : $3.97
500 : $5.53
250 : $6.15
100 : $6.7
50 : $9.15
25 : $9.58
5 : $10.57

ZLTMM-125-66-S-D-484

Samtec Inc

Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip
RoHS : Compliant

250 : $12.15
100 : $14.08
50 : $19.46
25 : $20.04
10 : $20.66
5 : $21.66
1 : $23.16

NHD-2.8-25664UMB3

Newhaven Display International

2.8 Blue Multi-Font Graphic OLED - Blue - 256 x 64 pixels - 3V - No Backlight - 85 x 39.8 x 6.0 mm
RoHS : Compliant

250 : $37.46
100 : $37.96
50 : $42.9
25 : $44.74
10 : $46.74
5 : $48.18
1 : $53.99

NHD-3.12-25664UMY3

Newhaven Display International

3.12 Yellow Multi-Font Graphic OLED - Yellow - 256 x 64 pixels - 3V - No Backlight - 89.2 x 44.0 x 6.0 mm
RoHS : Compliant

250 : $49.45
100 : $49.57
50 : $49.7
25 : $49.82
10 : $52.59
5 : $55.68
1 : $78.88

TAG025665-01

Thomas & Betts

TRNSFMR 25W 6.6A 6.6A 50HZ
RoHS : Compliant

5 : $822.9
3 : $845.45
1 : $857.19

TA025665-01-ALPHA

Thomas & Betts

TRNSFMR 25W 6.6A 6.6A 50HZ
RoHS : Compliant

5 : $746.84
3 : $767.3
1 : $777.95

ZLTMM-125-66-F-D-250

Samtec Inc

RoHS : Compliant

1,000 : $3.97
500 : $5.53
250 : $6.15
100 : $6.7
50 : $9.13
25 : $9.56
5 : $10.55

925662-2

TE Connectivity

.140 DIA PIN MOQ Reduction
RoHS : Compliant

24,000 : $0.2935
18,000 : $0.2995
12,000 : $0.4355
6,000 : $0.8252

2256688-1

TE Connectivity

VALVE POPPET DIRECTIONAL
RoHS : Compliant

250 : $52.63
100 : $53.33
50 : $54.79
25 : $57.14
10 : $59.7
5 : $61.54
1 : $68.97

5-146256-6

TE Connectivity

12 MODII HDR DRST B/A .100CL LF MOQ Reduction
RoHS : Compliant

4,800 : $1.74
3,600 : $1.78
2,400 : $2.59
1,200 : $4.9

ZLTMM-125-66-F-D-500

Samtec Inc

RoHS : Compliant

1,000 : $3.97
500 : $5.53
250 : $6.15
100 : $6.7
50 : $9.13
25 : $9.56
5 : $10.55

LT-2566-644-012

Carling Technologies

LT-SERIES TOGGLE SWITCH
RoHS : Compliant

100 : $18.3
75 : $18.67
50 : $23.58
25 : $38.32

Pasternack Enterprises US

PE34256-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMA Female Bulkhead Cable 60 Inch Length Using RG401 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 60 inch length using RG401 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 60 inch length using RG401 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34256-60, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34256-60 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34256-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 60 inch length using RG401 coax.

1 : $216.99
25 : $206.14
50 : $195.29

PE3W12566-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female to SMA Male Low Loss Cable 12 Inch Length Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable 12 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 12 inch length using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566-12 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566-12 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566-12 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable 12 inch length using LMR-LW195 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3W12566-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to SMA Male Low Loss Cable 48 Inch Length Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable 48 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 48 inch length using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566-48 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566-48 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566-48 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable 48 inch length using LMR-LW195 coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE35256-60

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Cable 60 Inch Length Using PE-C200 Coax., Radio frequency assembly BNC male to BNC male cable 60 inch length using PE-C200 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male cable 60 inch length using PE-C200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE35256-60, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE35256-60 is built with PE-C200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 60 inch length using PE-C200 coax.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W25666

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using PE-SR405FL Coax. PE3W25666 is a SMA male right angle to BMA jack 2 hole flange cable using PE-SR405FL coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W25666 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with PE-SR405FL coax.

PE3W25667

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using RG402 Coax. PE3W25667 is a SMA male right angle to BMA jack 2 hole flange cable using RG402 coax. This Pasternack SMA male right angle to BMA jack 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to jack BMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W25667 SMA male right angle to BMA jack 2 hole flange cable assembly is constructed with RG402 coax.

PE3W09256-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMA Male Right Angle Cable 6 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMP female to SMA male right angle cable 6 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male right angle cable 6 inch length using PE-SR405FL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and right angle SMA cable connection on the other. Our SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W09256-6 can also be known as a SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W09256-6 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMP female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09256-6 can also be used in the other direction and will be right angle SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male right angle cable 6 inch length using PE-SR405FL coax.

1 : $99.59
25 : $94.61
50 : $89.63
100 : $85.65

PE3W25660

Pasternack Enterprises

PE3M0256-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Specification: MIL-STD-348A, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 D38999 Contact Pin to SMA Male Cable 60 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0256-60 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a SMA male connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0256-60 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0256-60 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to SMA male cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0256-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to SMA RF cable are available on our downloadable PDF datasheet. BMA pin to SMA male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to SMA RF cable assembly as per your requirements.

1 : $145.99
10 : $140.15
25 : $134.31
100 : $128.47

PE3W25663

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to 7/16 DIN Male Cable Using LMR-400-UF Coax. PE3W25663 is a SMA male right angle to 7/16 DIN male cable using LMR-400-UF coax. This Pasternack SMA male right angle to 7/16 DIN male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 7/16 DIN for connector 2. SMA right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25663 SMA male right angle to 7/16 DIN male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W12566-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female to SMA Male Low Loss Cable 24 Inch Length Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566-24 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566-24 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566-24 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable 24 inch length using LMR-LW195 coax.

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3C8256-60

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 60 inches. 4.3-10 Female Bulkhead to N Male Right Angle Low PIM Cable 60 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 female bulkhead to N male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 female bulkhead to N male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 bulkhead cable connection on one end and right angle type N cable connection on the other. Our low PIM 4.3-10 to right angle type N cable assemblies have a female gender on end 1 and male on end 2. This 4.3-10 to N type cable is a female to male coax assembly, PE3C8256-60, can also be known as a low PIM 4.3-10 jack to right angle type N plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 jack to type N plug cable assembly PE3C8256-60 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 female bulkhead to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8256-60 can also be used in the other direction and will be right angle type N male to 4.3-10 female bulkhead cable assembly if the opposite connectivity is required. Low PIM 4.3-10 jack bulkhead to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 female bulkhead to N male right angle low PIM cable 60 inch length using TFT-402 coax using Times Microwave components.

1 : $106.99
25 : $101.64
50 : $96.29
100 : $92.01

PE3W25669

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Slide-On BMA Plug Bulkhead Cable Using RG174 Coax. PE3W25669 is a SMA male right angle to BMA plug bulkhead cable using RG174 coax. This Pasternack SMA male right angle to BMA plug bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BMA for connector 2. SMA right angle to BMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug BMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25669 SMA male right angle to BMA plug bulkhead cable assembly is constructed with RG174 coax.

PE3W22566

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Jack Right Angle to BNC Female Bulkhead Cable Using RG316 Coax. PE3W22566 is a SMB jack right angle to BNC female bulkhead cable using RG316 coax. This Pasternack SMB jack right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. SMB right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SMB right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22566 SMB jack right angle to BNC female bulkhead cable assembly is constructed with RG316 coax.

PE3W12566-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-LW195, RF Cable Type: LMR-LW195, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female to SMA Male Low Loss Cable 36 Inch Length Using LMR-LW195 Coax., Radio frequency assembly SMA female to SMA male low loss cable 36 inch length using LMR-LW195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to SMA male low loss cable 36 inch length using LMR-LW195 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W12566-36 can also be known as a low loss SMA jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W12566-36 is built with LMR-LW195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 8 GHz maximum frequency SMA female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12566-36 can also be used in the other direction and will be SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male low loss cable 36 inch length using LMR-LW195 coax.

1 : $88.89
25 : $84.45
50 : $80.0
100 : $76.45

TE Connectivity

925661-2

TE Connectivity

.140 DIA SOCKET Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC Tin (Sn) Socket Pre-Tin 20 – 14 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.33
100 : $0.44
10 : $0.54
1 : $0.68

21,226

2825663-3

TE Connectivity

MAG-MATE W/250 CONN TAB TPBR Magnet Wire Terminal Type: Tab Magnet Wire Size: 25 – 22 AWG Magnet Wire Size: .45 – .64 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Tab Width: .25 in Tab 25 – 22 AWG .45 – .64 mm Insulation Displacement (IDC) | TE Connectivity
RoHS : Compliant

2,500 : $0.39
1,000 : $0.46
500 : $0.52
250 : $0.54
100 : $0.61
50 : $0.68
25 : $0.72
10 : $0.81
1 : $0.89

11,990

925660-1

TE Connectivity

.140 DIA PIN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC Tin (Sn) Pin Pre-Tin 20 – 14 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.47
100 : $0.63
10 : $0.78
1 : $0.98

7,429

925663-1

TE Connectivity

.140 DIA SOCKET Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 14 – 10 AWG Operating Voltage: 250 VAC Tin (Sn) Socket Pre-Tin 14 – 10 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.4
100 : $0.53
10 : $0.66
1 : $0.83

6,876

925660-2

TE Connectivity

140 DIA PIN Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 20 – 14 AWG Operating Voltage: 250 VAC Tin (Sn) Pin Pre-Tin 20 – 14 AWG | TE Connectivity
RoHS : Compliant

1,000 : $0.36
100 : $0.48
10 : $0.59
1 : $0.75

2,565

42566-2

TE Connectivity

187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | TE Connectivity
RoHS : Compliant

2,500 : $0.22
1,000 : $0.26
500 : $0.29
250 : $0.31
100 : $0.34
50 : $0.35
25 : $0.36
10 : $0.4
1 : $0.45

1,132

1052566-1

TE Connectivity

2052 1618 02,SMA FM JACK RECPT RF Interface: SMA RF Connector Style: Jack RF Connector Mated Outer Diameter (Approximate): .25 in RF Connector Mated Outer Diameter (Approximate): 6.35 mm Impedance: 50 Ω SMA Jack .25" 6.35 mm | TE Connectivity
RoHS : Compliant

1,000 : $11.87
500 : $12.21
250 : $12.59
100 : $13.01
50 : $13.39
1 : $14.69

210