| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
244L-P48-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | AOM-5244L-R | PUI Audio | MIC COND ANLG OMNI -44DB 0.382"D |
| 6,214 | |
| CY8CTMA442-44LQI | Rochester Electronics LLC | TRUE TOUCH MCU |
| 3,079 | ||
| KLCA32-44-LD | Kun Hung Electric Co Ltd | SWITCH SNAP ACTION DPST 10A 250V |
| 2,000 | ||
| 74FCT162244LBCPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,635 | ||
| 74FCT162244LBETPA | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 1,449 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO RoHS : Compliant |
| 1,036 | ||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | OPTOISO 3.75KV 4CH TRANS 16-SO RoHS : Compliant |
| 1,036 | ||
| ESQ-102-44-L-D | Samtec Inc | CONN SOCKET 4POS 0.1 GOLD PCB RoHS : Compliant |
| 1,032 | ||
| 74FCT166244LCTPV | Rochester Electronics LLC | FAST 16-BIT BUFFER/LINE DRIVER |
| 529 | ||
| 74FCT166244LBCTPV | Rochester Electronics LLC | FAST CMOS 16 BIT BUFFER/LINE DR |
| 413 | ||
| ZL30244LFG7 | Microchip Technology Inc | IC CLOCK MULTIPLIER 64LGA RoHS : Compliant |
| 294 | ||
| ESQ-102-44-L-S | JRH ELECTRONICS | CONN SOCKET 2POS 0.1 GOLD PCB |
| 119 | ||
| ESW-102-44-L-S | Samtec Inc | CONN SOCKET 2POS 0.1 GOLD PCB RoHS : Compliant |
| 114 | ||
| ESQ-112-44-L-S | JRH ELECTRONICS | CONN SOCKET 12POS 0.1 GOLD PCB |
| 49 | ||
| ESQ-112-44-L-D | Samtec Inc | CONN SOCKET 24POS 0.1 GOLD PCB RoHS : Compliant |
| 14 | ||
![]() Avnet Americas | POM-2244L-C33-R | PUI Audio | Microphone, Omnidirectional, 50 Hz to 16 kHz, 2 VDC to 10 VDC, 2.2 kohm, -44 dB, 200 ?A - Boxed Product (Development Kits) (Alt: POM-2244L-C33-R) RoHS : Compliant |
| 13,080 | |
| ESQ-102-44-L-D | Samtec Inc | - Bulk (Alt: ESQ-102-44-L-D) RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-S | Samtec Inc | Board Stackers & Spacers, Socket Strip, 2.54 mm, 12 Contacts, Solder, 1 Rows, 2.54 mm, ESQ Series - Rail/Tube (Alt: ESQ-112-44-L-S) RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | - Bulk (Alt: ESQ-132-44-L-D-LL) RoHS : Compliant |
| 0 | ||
| PI74FCT3244LE | Diodes Incorporated | 8-Bit Buffer/Line Driver 2-Channel Non-Inverting 3-State CMOS 20-Pin TSSOP Tube - Rail/Tube (Alt: PI74FCT3244LE) RoHS : Compliant | 0 | |||
TLP292-4(4LGBTPE![]() | Toshiba America Electronic Components | - Tape and Reel (Alt: TLP292-4(4LGBTPE) RoHS : Compliant |
| 0 | ||
| PI74FCT3244LEX | Diodes Incorporated | 8-Bit Buffer/Line Driver 2-Channel Non-Inverting 3-State CMOS 20-Pin TSSOP T/R - Tape and Reel (Alt: PI74FCT3244LEX) RoHS : Compliant | 0 | |||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | - Bulk (Alt: ARC6-08-24.4-LU-LU-3-1) RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | - Trays (Alt: CY8C6244LQI-S4D82) RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | - Bulk (Alt: ARC6-08-24.4-LU-LD-2-1) RoHS : Compliant | 0 | |||
| 54FCT244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, W/3- - Rail/Tube (Alt: 54FCT244LMQB) RoHS : Not Compliant | 0 | |||
| AOM-5244L-R | PUI Audio | - Boxed Product (Development Kits) (Alt: AOM-5244L-R) RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2R-1 | Samtec Inc | B43742A9109M607 - Bulk (Alt: ARC6-08-24.4-LU-LD-2R-1) RoHS : Compliant |
| 0 | ||
| 54F2244LMQB | Teledyne HiRel | BUFFER/LINE DRIVER, OCTAL, W/3-STATE OUT - Rail/Tube (Alt: 54F2244LMQB) RoHS : Not Compliant | 0 | |||
| 54F244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH - Rail/Tube (Alt: 54F244LMQB) RoHS : Not Compliant | 0 | |||
![]() Newark | CY8C6244LQI-S4D92 | Infineon Technologies AG | PROGRAMMABLE SOC, 48MHZ, QFN-EP-68; RoHS : Compliant |
| 1,207 | |
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| S32M244LCABWKHST | NXP Semiconductors | MCU, 32BIT, 80MHZ, LQFP-EP-64; RoHS : Compliant |
| 160 | ||
| POM-2244L-C33-R | PUI Audio | MICROPHONE, ECM, OMNIDIRECTIONAL, 2K2; RoHS : Compliant |
| 60 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | RF ANTENNAS, 5.15-5.85GHZ, ADHESIVE; Antenna Type:GNSS / LTE / WiFi; Frequency Min:5.15GHz; Frequency Max:5.85GHz; Antenna Mounting:Adhesive; Gain:2dBi; VSWR:2; Input Power:-; Input Impedance:50ohm; Antenna Polarization:- RoHS Compliant: Yes RoHS : Compliant |
| 47 | ||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | EXTERNAL ANTENNA, 2.3GHZ-2.69GHZ, 4.6DBI; RoHS : Compliant |
| 39 | ||
| AOM-5244L-R | Projects Unlimited | MICROPHONE, ECM, OMNI, -44DB/4.5 - 10VDC; Microphone Type:ECM; Directivity:Omnidirectional; Acoustic Overload Point (AOP):110dB; Supply Voltage Min:4.5VDC; Supply Voltage Max:10VDC; Sensitivity (dB):-44dB; Impedance:1kohm RoHS Compliant: Yes RoHS : Compliant | 0 | |||
| ALI 2.244-LIS | Fluke Calibration | OFFSET ADAPTER FOR SHAFT WITH LONG BARS; RoHS : Not Compliant |
| 0 | ||
![]() NXP Semiconductors | S32M244LCABWKHSR | NXP Semiconductors | S32M24 Arm Cortex-M4 with FPU, 80 MHz, 512 KB Flash, LIN, CSEC security, 64 LQFP-EP, Reel 13" Q2/T3 in Drypack RoHS : Compliant |
| 1,480 | |
| S32M244LCABWKHST | NXP Semiconductors | S32M24 Arm Cortex-M4 with FPU, 80 MHz, 512 KB Flash, LIN, CSEC security, 64 LQFP-EP, Tray, Bakeable, Multiple in Drypack RoHS : Compliant |
| 904 | ||
![]() RS | 244L050 | Goodyear Belts | SYNCHRONOUS BELT, L SECTION, 13 MM WIDTH, 9.53 MM PITCH, 65 TEETH, 620 MM LENGT |
| 0 | |
| 244L050G | B&B Electronics Manufacturing Company | TIMING BELT, 0.500" BELT WIDTH, 65 TEETH, 24.375" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 244L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 65 TEETH, 24.375" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 5244L0110 | Norgren | BARB FITTING, ADJS ELB 1/8-10-32, NKL PL BRASS |
| 0 | ||
| 5244L5610 | Norgren | BARB FITTING, ADJS ELB 5/64-10-32, NKL PL BRASS |
| 0 | ||
| 89099244LF | Amphenol FCi | 89099-244LF-METRAL PWR HDR 1MX5R PF |
| 0 | ||
| 66902244LF | Amphenol FCi | DUAL POL QKE II W 15 AU |
| 0 | ||
| 68685244LF | Amphenol FCi | DUBOX RECPT, VERT.-SR, TH, 15 GOLD, 44 POS |
| 0 | ||
| 66245244LF | Amphenol FCi | QKE BACKPLANE PRELOAD ASSY |
| 0 | ||
| 9527880244LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 7731310244LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 101379260244LF | Amphenol FCi | Wire to Board connector, Header, Dual row, 2 positions |
| 0 | ||
| KT-DDPTLEDT8-24-4L | Keystone Technologies LLC | 2X4, 4 LAMP COMPLETE PRISMATIC TROFFER, WIRED FOR BYPASS (TYPE B) T8 LED TUBES |
| 0 | ||
| IZT41-244L3BHQ-3FU-X10 | SMC Corporation of America | AC TYPE IONIZER PACKAGE, IZT SERIES |
| 0 | ||
| LTGHO401-TB-B-GN/024 (4LT-19435638|LTGHO401-TB-B-GN/024|LTGHO401TBBGN/024) | Carling Technologies | SWITCH;ROCKER;TG/LTG SERIES |
| 0 | ||
![]() Microchip Technology Inc | ZL30244LFF7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | ||
| ZL30244LFG7 | Microchip Technology Inc | Dual Channel Any-Rate Clk Multiplier, VFLGA, Projected EOL: 2046-04-25 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | S32M244LCABWKHST | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 80MHz 64-QFP Tray RoHS : Compliant |
| 1,078 | |
| CY8C6244LQI-S4D82 | Infineon Technologies AG | Programmable SoC, CMOS RoHS : Compliant |
| 5,100 | ||
SN74ALVTH162244LR![]() | Texas Instruments | Bus Driver, ALVT Series, 16-Func, 4-Bit, True Output, BICMOS, PDSO48 RoHS : Compliant |
| 33,670 | ||
| A1244LUA-I1-T | Allegro MicroSystems LLC | Hall Effect Sensor, -8mT Min, 8mT Max, BICMOS, Plastic/epoxy, Rectangular, 3 Pin, Through Hole Mount RoHS : Compliant |
| 2,492 | ||
CY8C3244LTI-123![]() | Cypress Semiconductor | IC MCU 8051 8Bit 1 Core FLASH 16kB (16k x 8) 50MHz 48-QFN Tray RoHS : Compliant |
| 3,553 | ||
| CY8CTMA442-44LQI | Cypress Semiconductor | TRUE TOUCH MCU RoHS : Not Compliant |
| 3,079 | ||
| 74FCT162244LBATPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 510 | ||
| 74FCT162244LBCPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,635 | ||
| 74FCT162244LBETPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,449 | ||
| 74FCT16244LBATPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,207 | ||
| 74FCT16244LBCTPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,426 | ||
| 74FCT166244LBCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 413 | ||
| 74FCT166244LCTPA | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 1,884 | ||
| 74FCT166244LCTPV | Integrated Device Technology Inc | Fast CMOS 16-Bit Buffer/Line Driver RoHS : Not Compliant |
| 529 | ||
| 54F2244LMQB | National Semiconductor Corporation | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant |
| 39 | ||
![]() Sager | ESQ-102-44-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 175 | |
| ESW-102-44-L-S | Samtec Inc | PC / 104 Connectors .100 Elevated Socket Strip RoHS : Compliant |
| 91 | ||
| ESQ-102-44-L-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 90 | ||
| ESQ-112-44-L-D | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 76 | ||
| ESQ-112-44-L-S | Samtec Inc | PC / 104 Connectors Elevated Socket Strip, 0.100 Pitch RoHS : Compliant |
| 37 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | ELEVATED SOCKET STRIP RoHS : Compliant |
| 20 | ||
| ESQ-112-44-L-T | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESW-122-44-L-S | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE� SLIM CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| AOM-5244L-R | PUI Audio | Microphones 1.0kOhm x 9.7mm |
| 0 | ||
| ARC6-08-24.4-LU-LD-2R-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| S1SS-10-28-GF-22.44-L1 | Samtec Inc | MICRO MATE�Ѣ SINGLE ROW DISCRETE WIRE CABLE ASSEMBLY, 1.00 MM PITCH RoHS : Compliant |
| 0 | ||
| ESQ-122-44-L-S | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
| ESQ-112-44-L-D-LL | Samtec Inc | PC / 104 Connectors RoHS : Compliant | 0 | |||
![]() TME | BS-244L-B | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; black; 28mm |
| 4,672 | |
| BS-244L-R | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; red; 28mm |
| 1,162 | ||
| BS-244L-Y | axiomet | Laboratory connector: 4mm banana; socket; 60VDC; 24A; yellow; 28mm |
| 792 | ||
| 71918-244LF | Amphenol Corporation | Connector: IDC; male; PIN: 44; Quickie; straight; 2.54mm; UL94V-0 |
| 315 | ||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler; SMD; Ch: 4; Uinsul: 3.75kV; Uce: 80V; SO16; 50mA RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | IC: PSoC microcontroller; 48MHz; QFN40; 4kBSRAM,16kBFLASH RoHS : Compliant |
| 0 | ||
| CHVT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
| ARC6-24-24.4-LU-LD-2-1 | Samtec Inc | Cable; PIN: 74; 619.76mm; Insulation: PVC; blue; gold-plated; 34AWG RoHS : Compliant |
| 0 | ||
| CHOT 24.4 L | ILME UK Ltd | Enclosure for connectors: HDC; size 104.27; for cable; for latch |
| 0 | ||
![]() Interstate Connecting Components | 710FS393NF2424-4L | Glenair Inc | GTK CONDUIT FITTING |
| 3 | |
| 55/9952-24-4(LAT3) | TE Connectivity | 55/9952-24-4(LAT3) RoHS : Compliant | 0 | |||
| 55/9960-24-4(LAT3) | TE Connectivity | 55/9960-24-4(LAT3) RoHS : Compliant | 0 | |||
| MDM-25SH244LH-A174 | ITT Interconnect Solutions | MDM-25SH244LH-A174 | 0 | |||
| ALBFLB244LW | Amphenol PCD | FAIRLEAD BLOCK | 0 | |||
| 10137926-0244LF | Amphenol FCi | 10137926-0244LF-MTK3.0 2P VT S | 0 | |||
![]() PEI Genesis | WA23-244L | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| 1124-4LW24 | HellermannTyton |
| 0 | |||
| MDM-25SH244LH-A174 | ITT Interconnect Solutions |
| 0 | |||
| 1124-4L | HellermannTyton |
| 0 | |||
| S1997F2244L8 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | ESQ-102-44-L-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 116 | |
| ESW-102-44-L-D | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 116 | ||
| ESW-102-44-L-D-LL | Samtec Inc | PCB Header, Elevated, Socket, Wide RoHS : Compliant |
| 95 | ||
| ESW-102-44-L-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 60 | ||
| ESQ-102-44-L-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 59 | ||
| ESQ-112-44-L-D | Samtec Inc | .100 PC104 Elevated Skt Strip RoHS : Compliant |
| 50 | ||
| ESW-112-44-L-S | Samtec Inc | .100" Elevated Socket Strip RoHS : Compliant |
| 27 | ||
| ESW-122-44-L-D | Samtec Inc | .100 Low Profile Variable Post Height Te RoHS : Compliant |
| 26 | ||
| ESQ-122-44-L-D-LL | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 25 | ||
| ESW-132-44-L-D | Samtec Inc | .100 Elevated Skt Strip RoHS : Compliant |
| 25 | ||
| ESQ-112-44-L-S | Samtec Inc | Elevated Socket Strip, 0.100" Pitch RoHS : Compliant |
| 24 | ||
| ESQ-112-44-L-S-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 22 | ||
| ESW-132-44-L-S | Samtec Inc | PCB Header, Elevated, Socket, Wide RoHS : Compliant |
| 15 | ||
| ESQ-132-44-L-D-LL | Samtec Inc | PCB Header, 2.54mm Pitch, Elevated, Squa RoHS : Compliant |
| 13 | ||
| 710FS393NF2424-4L | Glenair Inc | ACCESSORIES - GTK CONDUIT FITTING |
| 1 | ||
![]() Richardson RFPD | X1005244-LWA3SX10A2 | Kyocera AVX Components | Antenna External 4.5dBi Gain 960MHz/2170MHz/2690MH RoHS : Compliant | 0 | ||
| MA244.LBIC.002 | Taoglas Antenna Solutions | Antenna Genesis -4.90dBi Gain 806MHz/960MHz/1518MH RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | DV402013244LF | INSTOCK | 1,204 | |||
| ESQ-102-44-L-D | Samtec Inc | INSTOCK RoHS : Compliant | 960 | |||
![]() Avnet Abacus | AOM-5244L-R | PUI Audio | (Alt: AOM-5244L-R) RoHS : Compliant | 0 | ||
| ESQ-102-44-L-D | Samtec Inc | (Alt: ESQ-102-44-L-D) RoHS : Compliant | 0 | |||
| ESW-102-44-L-S | Samtec Inc | (Alt: ESW-102-44-L-S) RoHS : Compliant | 0 | |||
| 77313-122-44LF | Amphenol Corporation | Conn Unshrouded Header HDR 44 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-122-44LF) RoHS : Compliant | 0 | |||
| POM-2244L-C33-R | PUI Audio | Microphone Omnidirectional 50 Hz to 16 kHz 2 VDC to 10 VDC 22 kohm 44 dB 200 A (Alt: POM-2244L-C33-R) RoHS : Compliant | 0 | |||
| X1005244-LWA3SX10A2 | Kyocera AVX Components | (Alt: X1005244-LWA3SX10A2) RoHS : Compliant | 0 | |||
![]() Avnet Asia | TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | ||
| CET00244L110021 | Amphenol Corporation | S SOCKET AMPHENOL CET00244L110021 SMT (Alt: CET00244L110021) RoHS : Compliant | 0 | |||
![]() Avnet Silica | S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | ||
![]() Braemac Americas-Symmetry | X1005244-LWA3SX10A2 | Kyocera AVX Components | 3-in-1 GNSS (Active) / LTE / Wi-Fi Dual Band External antenna, 1m RG174 & CFD-200 cable, SMA & RP-SMA connector RoHS : Compliant |
| 1 | |
| MA244.LBIC.002 | Taoglas Antenna Solutions | MA244 High Temperature Genesis 4in1 GNSS, 2*Cellular, Wi-Fi Adhesive Mount Low-Profile Antenna |
| 0 | ||
![]() EBV Elektronik | CY8C3244LTI-130 | Infineon Technologies AG | (Alt: SP005642079) RoHS : Compliant | 0 | ||
| CY8C4244LQI-443 | Infineon Technologies AG | Processor PSoC 4 RISC 32Bit 48MHz 40Pin QFN EP (Alt: SP005646537) RoHS : Compliant | 0 | |||
| S32M244LCABWKHST | NXP Semiconductors | ARM MCU S32M2 Family S32M24x Series Microcontrollers ARM CortexM4F 32 bit 80 MHz 512 KB (Alt: S32M244LCABWKHST) RoHS : Compliant | 0 | |||
| S32M244LCABWKHSR | NXP Semiconductors | (Alt: S32M244LCABWKHSR) RoHS : Compliant | 0 | |||
| CY8C3244LTI-130T | Infineon Technologies AG | MCU 8Bit PSoC 8051 CISC 16KB Flash 25V33V5V 68Pin QFN EP TR (Alt: SP005642081) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | (Alt: SP005658461) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | (Alt: SP005658463) RoHS : Compliant | 0 | |||
| CY8C6244LQQ-S4D92 | Infineon Technologies AG | (Alt: SP005650741) RoHS : Compliant | 0 | |||
| CY8C6244LQI-S4D92 | Infineon Technologies AG | MCU 32Bit PSoC6 ARM CortexM4FARM CortexM0 RISC 256KB Flash 17V to 36V QFN 68Pin Tray (Alt: SP005658467) RoHS : Compliant | 0 | |||
| TLP292-4(4LGBTPE(T | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 3750Vrms 16Pin SOIC TR (Alt: TLP292-4(4LGBTPE(T) RoHS : Compliant | 0 | |||
![]() Flip Electronics | CY8C4244LQI-443 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 258 | ||
| S32M244LCABWKHST | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 160 | |||
| CY8C3244LTI-123 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 3 | |||
![]() Maritex | U74HC244L-D20-T![]() | Unisonic Technologies Co Ltd | Specialty Drivers; U74HC244L-D20-T; UTC |
| 100 | |
![]() Master Electronics | CHOT-24.4L | Mencom Corporation | Standard - Rectangular Hood - size 104.27 - 2 Pegs - Side .5-NPT cable entry RoHS : Compliant |
| 0 | |
| ESQ-112-44-L-T | Samtec Inc | PCB Receptacle Elevated Strip Board-to-Board 2.54 mm 3 Rows 36 Contacts Through Hole Mount RoHS : Compliant |
| 0 | ||
| ESW-122-44-L-S | Samtec Inc | Conn Board Stacker RCP 22 POS 2.54mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| SESDT-05-32-G-24.4-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LU-3-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CHVT-24.4L | Mencom Corporation | Standard - Rectangular Hood - size 104.27 - 2 Pegs - Top .5-NPT cable entry RoHS : Compliant |
| 0 | ||
| ARC6-08-24.4-LU-LD-2-1 | Samtec Inc | ACCELERATE SLIM CABLE AS RoHS : Compliant |
| 0 | ||
| ESQ-102-44-L-D | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-112-44-L-S | Samtec Inc | .100 PC/104™ Elevated Socket Strip RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-T-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESQ-132-44-L-S-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ESW-112-44-L-D-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SDT-10-28-GF-02.44-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SDT-20-28-GF-02.44-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-15-28-GF-02.44-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE35244LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50. SMA Male to Reverse Polarity TNC Male Cable Using RG188 Coax, RoHS. PE35244LF is a SMA male to reverse polarity TNC male cable using RG188 coax. This Pasternack SMA male to reverse polarity TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35244LF SMA male to TNC reverse polarity male cable assembly is constructed with RG188 coax. | 252 | ||
| PE35244LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to Reverse Polarity TNC Male Cable 48 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 48 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 48 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35244LF-48, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35244LF-48 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35244LF-48 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 48 inch length using RG188 coax, RoHS. |
| 42 | ||
| PE35244LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to Reverse Polarity TNC Male Cable 24 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 24 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 24 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35244LF-24, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35244LF-24 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35244LF-24 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 24 inch length using RG188 coax, RoHS. |
| 42 | ||
| PE35244LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to Reverse Polarity TNC Male Cable 60 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 60 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 60 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35244LF-60, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35244LF-60 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35244LF-60 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 60 inch length using RG188 coax, RoHS. |
| 42 | ||
| PE35244LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMA Male to Reverse Polarity TNC Male Cable 72 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 72 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 72 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35244LF-72, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35244LF-72 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35244LF-72 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 72 inch length using RG188 coax, RoHS. |
| 42 | ||
| PE35244LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to Reverse Polarity TNC Male Cable 12 Inch Length Using RG188 Coax, RoHS., Radio frequency assembly SMA male to reverse polarity TNC male cable 12 inch length using RG188 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to reverse polarity TNC male cable 12 inch length using RG188 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity TNC cable is a male to male coax assembly, PE35244LF-12, can also be known as a SMA plug to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity TNC plug cable assembly PE35244LF-12 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35244LF-12 can also be used in the other direction and will be reverse polarity TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to reverse polarity TNC male cable 12 inch length using RG188 coax, RoHS. |
| 42 | ||
| PE3244LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMC Plug to BNC Male Cable 12 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMC plug to BNC male cable 12 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 12 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3244LF-12, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3244LF-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3244LF-12 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 12 inch length using RG58 coax, RoHS. |
| 31 | ||
| PE3244LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 72 inches. SMC Plug to BNC Male Cable 72 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMC plug to BNC male cable 72 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 72 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3244LF-72, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3244LF-72 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3244LF-72 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 72 inch length using RG58 coax, RoHS. |
| 31 | ||
| PE3244LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMC Plug to BNC Male Cable 60 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3244LF-60, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3244LF-60 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3244LF-60 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 60 inch length using RG58 coax, RoHS. |
| 31 | ||
| PE3244LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMC Plug to BNC Male Cable 24 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly SMC plug to BNC male cable 24 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to BNC male cable 24 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and BNC cable connection on the other. Our SMC to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SMC to BNC cable is a plug to male coax assembly, PE3244LF-24, can also be known as a SMC male to BNC plug cable assembly and will be shipped same-day as it is purchased. SMC male to BNC plug cable assembly PE3244LF-24 is built with RG58 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3244LF-24 can also be used in the other direction and will be BNC male to SMC plug cable assembly if the opposite connectivity is required. SMC male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to BNC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to BNC male cable 24 inch length using RG58 coax, RoHS. |
| 31 | ||
| PE3W02244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. N Male to N Female Cable Using RG393 Coax with HeatShrink, LF Solder. PE3W02244LF/HS is a N male to N female cable using RG393 coax. This Pasternack N male to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02244LF/HS N male to N female cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W03244LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-48 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-48 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-24 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-24 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03244LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 36 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-36 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-36 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-36 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W09244LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.3-10 Male to Snap-On 4.3-10 Male Cable Using SPP-250-LLPL Coax with HeatShrink, LF Solder. PE3W09244LF/HS is a 4.3-10 male to 4.3-10 male cable using SPP-250-LLPL coax. This Pasternack 4.3-10 male to 4.3-10 male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our male 4.3-10 to male 4.3-10 cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W09244LF/HS 4.3-10 male to 4.3-10 male cable assembly is constructed with SPP-250-LLPL coax. | 0 | |||
![]() Teledyne HiRel | 54F244LMQB | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS | 0 | ||
![]() Vyrian | A1244LLHLX-I1-T | Allegro MicroSystems | Hall Effect Sensor, -8mT Min, 8mT Max, BICMOS, Plastic/epoxy, Rectangular, 3 Pin, Surface Mount | 16,032 | ||
| CY8C6244LQI-S4D12 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 11,229 | |||
| CY8C6244LQI-S4D82 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 10,324 | |||
| A1244LLHLT-I2-T | Allegro MicroSystems | Hall Effect Sensor | 9,676 | |||
54F2244LM![]() | Texas Instruments | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 | 9,253 | |||
| 54F2244LMQB | National Semiconductor Corporation | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 RoHS : Not Compliant | 8,887 | |||
| CY8C6244LQQ-S4D92 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 7,672 | |||
| ESW-102-44-L-D | Samtec Inc | Board Connector, 4 Contact(s), Female, Solder Terminal, Socket RoHS : Compliant | 7,647 | |||
| CY8C6244LQI-S4D62 | Infineon Technologies AG | SoC, CMOS RoHS : Compliant | 7,493 | |||
| ZL30244LFG7 | Microchip Technology Inc | Phase Locked Loop RoHS : Compliant | 6,459 | |||
74ALVTH162244LRG4![]() | Texas Instruments | Bus Driver, ALVT Series, 4-Func, 4-Bit, True Output, BICMOS, PDSO48 RoHS : Compliant | 5,659 | |||
54FCT244LMQB![]() | Texas Instruments | Bus Driver, FCT Series, 2-Func, 4-Bit, True Output, CMOS, CQCC20 | 3,646 | |||
54F244LMQB![]() | Texas Instruments | Bus Driver, F/FAST Series, 2-Func, 4-Bit, True Output, TTL, CQCC20 | 3,304 | |||
| 54ACT244LM | National Semiconductor Corporation | Bus Driver, ACT Series, 2-Func, 4-Bit, True Output, CMOS, CQCC20 | 2,206 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |