| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
232W3-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | OP232W | TT Electronics OPTEK Technology | EMITTER IR 890NM 100MA TO-46 RoHS : Compliant |
| 2,945 | |
| SIKA 232 WH 600ML | Austin Hardware & Supply | SIKAFLEX 232 WHITE 600ML UNIPAC |
| 2,075 | ||
| DC95F232W | Amphenol Advanced Sensors | THERM NTC 2.252KOHM 3969K BEAD |
| 1,204 | ||
| AD8232WACSZ | Analog Devices Inc | IC ECG FRONT END 20-LFCSP RoHS : Compliant | 566 | |||
| USB2-RS232WN-06 | Tera Grand | USB-A to RS232 Serial, Nuts, 6' |
| 392 | ||
| APT1232W | Panasonic Electronic Components | OPTOISOLATOR 5KV TRIAC 1CH 6-DIP RoHS : Compliant |
| 351 | ||
| DC95F232WN | Amphenol Advanced Sensors | THERM NTC 2.252KOHM 3969K BEAD |
| 251 | ||
| USB-RS232-WE-5000-BT_5.0 | FTDI Chip | CABLE USB RS232 5V WIRE END 5M |
| 247 | ||
| USB2-RS232WN-10 | Tera Grand | USB-A to RS232 Serial, Nuts 10' |
| 194 | ||
| APT1232WA | Panasonic Electronic Components | OPTOISOLTR 5KV TRIAC 1CH 6DIP GW RoHS : Compliant |
| 100 | ||
| TK95F232WN | Amphenol Advanced Sensors | EPOXY COATED, INSULATED LEADS, 2 |
| 58 | ||
| K16-232-W | INDUSTRIALEMART | 16MM SWITCH PUSH RECT DPDT WHITE |
| 36 | ||
| M1232 WH005 | Alpha Wire | CABLE 2CON 20AWG WHT SHLD 100' |
| 10 | ||
| SV9Z-J232W | IDEC Corporation | 14MM RELAY JUMPER GRAY |
| 3 | ||
| NPORT 5232 W/ ADAPTER | MANUAUTO | SERIAL TO ETHER RS422/485 |
| 3 | ||
![]() Avnet Americas | M55342K01B232WRULD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 50 mW, 0502 [1406 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K01B232WRULD) RoHS : Not Compliant |
| 0 | |
| M55342K03B232WRWBD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 200 mW, 1005 [2512 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K03B232WRWBD) RoHS : Not Compliant |
| 0 | ||
| M55342K05B232WRS2D | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 225 mW, 2208 [5819 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K05B232WRS2D) RoHS : Not Compliant |
| 0 | ||
| M55342K05B232WRWLD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 225 mW, 2208 [5819 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K05B232WRWLD) RoHS : Not Compliant |
| 0 | ||
| M55342K05B232WRWBD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 225 mW, 2208 [5819 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K05B232WRWBD) RoHS : Not Compliant |
| 0 | ||
| M55342K09B232WRUL2 | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 1 W, 2512 [6432 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K09B232WRUL2) RoHS : Not Compliant |
| 0 | ||
| M55342K10B232WRS6D | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 500 mW, 1010 [2725 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K10B232WRS6D) RoHS : Not Compliant |
| 0 | ||
| M55342M06B232WTWAT | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342M06B232WTWAT) RoHS : Not Compliant |
| 0 | ||
| D55342K07B232WRS3D | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B232WRS3D) RoHS : Not Compliant |
| 0 | ||
| D55342K07B232WSWBD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: D55342K07B232WSWBD) RoHS : Not Compliant |
| 0 | ||
| M55342K04B232WRULD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 150 mW, 1505 [3812 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K04B232WRULD) RoHS : Not Compliant |
| 0 | ||
| M55342K08B232WTWLT | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 800 mW, 2010 [5025 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K08B232WTWLT) RoHS : Not Compliant |
| 0 | ||
| M55342K06B232WSULD | Vishay Intertechnologies | SMD Chip Resistor, 232 ohm, ? 0.5%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B232WSULD) RoHS : Not Compliant |
| 0 | ||
| DC95F232W | Amphenol Corporation | - Bulk (Alt: DC95F232W) RoHS : Not Compliant |
| 0 | ||
| BT232W-800ETF | WeEn Semiconductor Co Ltd | Triac, 800 V, 16 A, SOT-223, 1 V, 10 mA, 4 Pins - Tape and Reel (Alt: BT232W-800ETF) RoHS : Compliant |
| 0 | ||
![]() Newark | USB-RS232-WE-1800-BT_0.0 | FTDI Chip | CABLE, USB A - RS232, SERIAL CONVERTOR; RoHS : Compliant |
| 1,649 | |
| OP232W | TT Electronics OPTEK Technology | INFRARED EMITTER, 890 NM, TO-46; RoHS : Compliant |
| 695 | ||
| DC95F232WN | Amphenol Advanced Sensors | THERMISTOR, NTC, 2K252, WIRE LEADED; Thermistor Type:Bead, Radial Leaded; Resistance (25°C):2.252kohm; Product Range:DC95 Series; B-Constant:3969K; B-Constant Tolerance:-; Probe Material:-; Lead Length:38.1mm; Qualification:- RoHS Compliant: Yes RoHS : Compliant |
| 251 | ||
| USB-RS232-WE-1800-BT_3.3 | FTDI Chip | CABLE, USB/RS232 CONV, WIRE-END 3V3 1.8M; RoHS : Compliant |
| 203 | ||
| USB-RS232-WE-1800-BT_5.0 | FTDI Chip | CABLE, USB/RS232 CONV, WIRE-END, 5V 1.8M; RoHS : Compliant |
| 167 | ||
| USB-RS232-WE-5000-BT_5.0 | FTDI Chip | CABLE, USB/RS232 CONV, WIRE-END, 5V, 5M; RoHS : Compliant |
| 82 | ||
| USB-RS232-WE-5000-BT_0.0 | FTDI Chip | CABLE, USB/RS232 CONV, WIRE-END, 5M; RoHS : Compliant |
| 73 | ||
| ICR-3232W | Advantech Co Ltd | Cellular Router,Cat4,ANZ,2xETH,WiFi,RS23; RoHS : Not Compliant |
| 5 | ||
| DC95F232W | Amphenol Advanced Sensors | THERMISTOR, 2K252, DC95; RoHS : Not Compliant |
| 0 | ||
| TK95F232WN | Amphenol Advanced Sensors | NTC THERMISTOR, 2.252KOHM, WIRE LEADED; RoHS : Compliant |
| 0 | ||
| DC95F232WN | Amphenol Advanced Sensors | NTC THERMISTOR, 2.252KOHM, WIRE LEADED; RoHS : Compliant |
| 0 | ||
| EC95F232WN | Amphenol Advanced Sensors | NTC THERMISTOR, 2.252KOHM, WIRE LEADED; RoHS : Compliant |
| 0 | ||
| USB-RS232-WE-5000-BT_3.3 | FTDI Chip | SMART CABLE ASSEMBLY USB-RS232 CONVERTER; RoHS : Compliant |
| 0 | ||
![]() RS | USB-RS232-WE-1800-BT_5.0 | FTDI Chip | SINGLE ENDED, USB TYPE A PLUG TO PIGTAIL, 1.8 M, USBMADEEZ-UART SERIES RoHS : Compliant |
| 1,708 | |
| USB-RS232-WE-1800-BT_0.0 | FTDI Chip | SINGLE ENDED, USB TYPE A PLUG TO PIGTAIL, 1.8 M, USBMADEEZ-UART SERIES |
| 420 | ||
| 1223-2W | Leviton Manufacturing Co | 20 AMP 120/277 VOLT TOGGLE 3-WAY AC QUIET SWITCH - WHITE |
| 3 | ||
| 5623-2W | Leviton Manufacturing Co | WH SW DEC 3W B/S-WIRED 20A125/277VAC |
| 1 | ||
| OP232W | TT Electronics OPTEK Technology | EMITTER IR 890NM 100MA TO-46 RoHS : Compliant |
| 0 | ||
| 1223-2WL | Leviton Manufacturing Co | WH SW TGL TR 3W 20A120/277VAC |
| 0 | ||
| DC95F232W | Amphenol Advanced Sensors | INTERCHANGEABLE CHIP +/- .2OC (0OC - 70OC) |
| 0 | ||
| APT1232WA | Panasonic Electronic Components | SOLID STATE RELAYAPT PHOTOTRIAC COUPLER RoHS : Compliant |
| 0 | ||
| 3232WCACC20 | Pass & Seymour | CC RECEPT DUP CO/ALR 15A 125V 2P 3W WH |
| 0 | ||
| 5232WWTHCD4N | APEM Inc | TOGGLE SWITCH 5000 MINIATURE |
| 0 | ||
| HBL501232WM1 | Hubbell Wiring Device-Kellems | W/PROOF ELEC REEL, 50', 12/3 SO COR |
| 0 | ||
| 200THFSR232WY | Eaton Cutler-Hammer | AUTOVAR, 240V, 200 KVAR, 60HZ, 4.2H, NEMA 3R |
| 0 | ||
| 300THFSR232WY | Eaton Cutler-Hammer | AUTOVAR, 240V, 300 KVAR, 60HZ, 4.2H, NEMA 3R |
| 0 | ||
| 5232WCDB16X404 | APEM Inc | TOGGLE SWITCH 5000 MINIATURE RoHS : Compliant |
| 0 | ||
| VB2-3/2WK 4T-0.3/0.3/S90 (U0158-53) | TURCK Inc | CORDSET, VB2-3/2WK 4T-0.3/0.3/S90, U0158-53 |
| 0 | ||
![]() Rochester Electronics | KW DDLM31.EH-5J6K-A232-W4A4-140-R18 | ams OSRAM Group | KW DDLM31.EH - SYNIOS S2222, White LED RoHS : Compliant |
| 496,000 | |
![]() Sager | 622232-WW-NE | Carling Technologies | Rocker Switches | 0 | ||
| 5232WWTHCD4N | IDEC Corporation | TOGGLE SWITCH 5000 MINIATURE |
| 0 | ||
| HBL501232WM1 | Hubbell Incorporated | W/PROOF ELEC REEL, 50', 12/3 SO COR | 0 | |||
| S232-W | ABB Group | OC S232W PVC CTD 2GNG CVR 2WIRE3POL |
| 0 | ||
| OP232W | TT Electronics OPTEK Technology | Infrared Emitters Infrared 890nm RoHS : Compliant | 0 | |||
| 5232WCDB16X404 | IDEC Corporation | TOGGLE SWITCH 5000 MINIATURE |
| 0 | ||
| AP232WH | ABB Group | Wire Ducting & Raceways | 0 | |||
| APT1232WA | Panasonic Electronic Components | TRIAC & SCR OUTPUT OPTOCOUPLERS THROUGH HOLE RoHS : Compliant |
| 0 | ||
| HBL501232W | Hubbell Incorporated | W/PROOF ELEC REEL, 50', 12/3 SO CORD | 0 | |||
| 622232-WW-NA | Carling Technologies | Rocker Switches | 0 | |||
| 9232WWCD | IDEC Corporation | PUSHBUTTON SWITCH 9100 METAL |
| 0 | ||
| 622232-WB-NE | Carling Technologies | Rocker Switches | 0 | |||
| 5232WAD | IDEC Corporation | TOGGLE SWITCH 5000 MINIATURE |
| 0 | ||
| 5232WWCD | IDEC Corporation | TOGGLE SWITCH 5000 MINIATURE |
| 0 | ||
| APT1232W | Panasonic Electronic Components | TRIAC & SCR OUTPUT OPTOCOUPLERS THROUGH HOLE RoHS : Compliant |
| 0 | ||
![]() TME | DC95F232WN | Amphenol Corporation | NTC thermistor; 2.252kΩ; THT; 3969K; -80÷150°C; 38.1x2.4mm; 75mW RoHS : Compliant |
| 3,482 | |
| DS1001-02-32W13 | Ningbo connfly electronic CO LTD | Socket: integrated circuits; DIP32; Pitch: 2.54mm; precision; SMT |
| 706 | ||
| USB-RS232-WE-1800-BT_3.3 | FTDI Chip | Module: cable integrated; RS232,USB; lead; 1.8m; 3.3VDC; USB A RoHS : Compliant |
| 254 | ||
| USB-RS232-WE-5000-BT_0.0 | FTDI Chip | Module: cable integrated; RS232,USB; lead; 5m; USB A |
| 189 | ||
| USB-RS232-WE-1800-BT_0.0 | FTDI Chip | Module: cable integrated; RS232,USB; lead; 1.8m; USB A |
| 104 | ||
| USB-RS232-WE-5000-BT_5.0 | FTDI Chip | Module: cable integrated; RS232,USB; lead; 5m; 5VDC; USB A |
| 42 | ||
| USB-RS232-WE-1800-BT_5.0 | FTDI Chip | Module: cable integrated; RS232,USB; lead; 1.8m; 5VDC; USB A RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | KM4232W259Q60 | Samsung Semiconductor | 8 MEGA BIT GRAPHIC BUFFER MEMORY PRODUCT Video DRAM, 256KX32, 60ns, CMOS, PQFP120 RoHS : Not Compliant | 87 | ||
![]() Interstate Connecting Components | 85232W20 | SOURIAU-SUNBANK | J5808 RoHS : Not Compliant | 0 | ||
| 85232W08 | SOURIAU-SUNBANK | RoHS : Not Compliant | 0 | |||
| 85232W12 | SOURIAU-SUNBANK | J5808 RoHS : Not Compliant | 0 | |||
| 852-32W16 | SOURIAU-SUNBANK | BACKSHELL SHIELD TERM & HEATSHRINK SLEEV | 0 | |||
| 85232W14 | SOURIAU-SUNBANK | J5808 RoHS : Not Compliant | 0 | |||
| 85232W18 | SOURIAU-SUNBANK | RoHS : Not Compliant | 0 | |||
| 852-32W18 | SOURIAU-SUNBANK | M26482 BACKSHELL | 0 | |||
| 232W012-25-G01-0 | TE Connectivity | 232W012-25-G01-0 | 0 | |||
![]() PEI Genesis | M85049/23-2W | SOURIAU-SUNBANK |
| 0 | ||
![]() Rutronik | TA2-32W-V-T/R | Diptronics Manufacturing Inc | Tact Switch,SMT,RA,4x7mm,3.2N RoHS : Compliant |
| 1,800 | |
![]() Chip 1 Exchange | OP232 W | INSTOCK | 1,025 | |||
| AMMC-6232-W10 | Broadcom Limited | INSTOCK RoHS : Compliant | 2 | |||
![]() Avnet Abacus | DC95F232WN | Amphenol Corporation | NTC Thermistor 2252 kohm Wire Leaded Through Hole 3969 K DC95 Series 02C (Alt: DC95F232WN) RoHS : Compliant | 3,000 | ||
| DC95F232W | Amphenol Corporation | (Alt: DC95F232W) RoHS : Not Compliant | 0 | |||
| APT1232WA | Panasonic Electronic Components | Optocoupler Triac ACOutput 1Channel 600Vdrm 6Pin DIP SMD Tube (Alt: APT1232WA) RoHS : Compliant | 0 | |||
| EC95F232W | Amphenol Corporation | (Alt: EC95F232W) RoHS : Not Compliant | 0 | |||
| SC30F232W | Amphenol Corporation | (Alt: SC30F232W) RoHS : Not Compliant | 0 | |||
| TK95F232W | Amphenol Corporation | (Alt: TK95F232W) RoHS : Compliant | 0 | |||
| SC50F232W | Amphenol Corporation | (Alt: SC50F232W) RoHS : Not Compliant | 0 | |||
| APT1232WAY | Panasonic Electronic Components | Optocoupler Triac ACOutput 1Channel 600Vdrm 6Pin DIP SMD TR (Alt: APT1232WAY) RoHS : Compliant | 0 | |||
| TK95F232WN | Amphenol Corporation | NTC epoxy coated interchangeable thermistor 2252KOhm Wire Lead (Alt: TK95F232WN) RoHS : Compliant | 0 | |||
| EC95F232WN | Amphenol Corporation | NTC epoxy coated interchangeable thermistor 0008OD leads 2252KO 02C from 0C70C (Alt: EC95F232WN) RoHS : Compliant | 0 | |||
| TA2-32W-V-T/R | Diptronics Manufacturing Inc | Switch Tactile SPST Rectangular Button Solder 005A 12VDC 100000Cycle 157N SMD TR - Tape and Reel (Alt: TA2-32W-V-T/R) RoHS : Compliant | 0 | |||
| TAN2-32W-V-T/R | Diptronics Manufacturing Inc | Switch Tactile NO SPST Rectangular Button Solder 005A 12VDC 50000Cycles 156N SMD TR - Tape and Reel (Alt: TAN2-32W-V-T/R) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BT232W-800ETF | WeEn Semiconductor Co Ltd | Triac, 800 V, 16 A, SOT-223, 1 V, 10 mA, 4 Pins (Alt: BT232W-800ETF) RoHS : Compliant | 0 | ||
![]() Avnet Silica | C14232_WINNIE-S | LEDIL | Lens for V18 Gen6CLL01xLUXEON COB 1202sDuris S10MJT COB LES 145 LEDs (Alt: C14232_WINNIE-S) RoHS : Compliant | 0 | ||
| S232WXXUU-U1041-P | Delkin Devices | microSD 32GB (Alt: S232WXXUU-U1041-P) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | C14232_WINNIE-S | LEDIL | Lens for V18 Gen6CLL01xLUXEON COB 1202sDuris S10MJT COB LES 145 LEDs (Alt: C14232_WINNIE-S) RoHS : Compliant | 0 | ||
| KWDDLM31.EH-5J6K-A232-W4A4-140-R18 | ams OSRAM Group | LED Chip Cool White 5700K 200mA 2Pin SMD TR (Alt: Q65112A5706) RoHS : Compliant | 0 | |||
![]() Master Electronics | OP232W | TT Electronics OPTEK Technology | Infrared Emitter 890nm Circular Top Mount 2-Pin TO-46 Bag RoHS : Compliant |
| 1,004 | |
| 5623-2W | Leviton Manufacturing Co | 20 Amp 120/277 Volt Decora Plus Rocker 3-Way AC Quiet Switch Commercial Spec Grade Self Grounding Back & Side Wired - White RoHS : Compliant |
| 60 | ||
| M1232-WH005 | Alpha Wire | White - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
| 5232WWTHCD4N | APEM Inc | Toggle Switch - SPDT - On-Mom - 0.4A 20VAC 20VDC - 9.00mm Snap On Paddle Actuator - Brass Gold Plated Contacts - PC Pin Right Angle Vertical. RoHS : Compliant |
| 0 | ||
| S232-W | Thomas & Betts | PVC CTD 2GNG CVR 2WIRE3POL RoHS : Compliant |
| 0 | ||
| 5232WCDB16X404 | APEM Inc | Switch Toggle ON None Mom SPDT Round Lever PC Pins 20VAC 20VDC 0.4VA PC Mount with Bracket Bulk RoHS : Compliant |
| 0 | ||
| APT1232WA | Panasonic Electronic Components | APT Phototriac RoHS : Compliant |
| 0 | ||
| 9232WWCD | APEM Inc | Switch Push Button N.C. SPST Round Plunger 0.1A 30VDC Momentary Contact PC Pins Thru-Hole RoHS : Compliant |
| 0 | ||
| 5232WAD | APEM Inc | Switch Toggle ON Mom SPDT Lever PC Pins 4A 250VAC 30VDC PC Mount with Bracket RoHS : Compliant |
| 0 | ||
| NHD-12232WG-EYYH-V#A | Newhaven Display International | LCD Graphic Display - 122 x 32 Pixels - 5V - 8-Bit Parallel - Controller:SED-1520 - 1x20 Top RoHS : Compliant |
| 0 | ||
| NHD-19232WG-BTMI-V#T | Newhaven Display International | LCD Graphic Display - 192 x 32 Pixels - 5.0V - 8-Bit Parallel - Controller:ST7920 - 2x8 Left RoHS : Compliant |
| 0 | ||
| AP-232-WH | Thomas & Betts | Connector - Diagonal Post Base - 4 Horizontal Mounting Holes - Steel - White Urethane Power Coated Finish RoHS : Compliant |
| 0 | ||
| 5232WWCD | APEM Inc | TOGGLE SWITCH 5000 MINIATU RoHS : Compliant |
| 0 | ||
| APT1232W | Panasonic Electronic Components | APT Phototriac RoHS : Compliant |
| 0 | ||
| 5232WCDB | APEM Inc | TOGGLE SWITCH 5000 MINIATU RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06232/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W06232/WP-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06232/WP-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W06232/WP-24 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | |
| PE3W06232/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 36 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W06232/WP-36 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06232/WP-36 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W06232/WP-36 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06232/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W06232/WP can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06232/WP RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W06232/WP is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W06232/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W06232/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06232/WP-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W06232/WP-60 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06232/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W06232/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06232/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W06232/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder (captive contact) attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Vyrian | VT232WFCX-ADJ | Analog Devices (Maxim Integrated) | 11,756 | |||
| AD8232WACSZ | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 10,613 | |||
| VT232WFC-ADJ | Analog Devices (Maxim Integrated) | 10,508 | ||||
| AD8232WACSZ-RL | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 8,823 | |||
| AD8232WACSZ-R7 | Analog Devices Inc | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 7,551 | |||
| VT232WFCR-ADJ | Analog Devices (Maxim Integrated) | 5,480 | ||||
| AMMC-6232-W10 | Broadcom Limited | Narrow Band Medium Power Amplifier, 18000MHz Min, 32000MHz Max, 1 Func RoHS : Compliant | 5,370 | |||
| NHD-19232WG-BGGH-V#T | Newhaven Display International | Display | 296 | |||
| USB-RS232-WE-1800-BT_3.3 | FTDI Chip | USB Connector, 4 Contact(s), Male, Plug RoHS : Compliant | 47 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |