| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
2180JL-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() ComSIT USA | CFR25JT52180R | AVAILABLE EU | 15,263 | |||
![]() NexGen Digital | 0218.032MXP | Littelfuse Inc | RoHS : Compliant | 30,785 | ||
3522180RFT![]() | TE Connectivity | RoHS : Compliant | 24,262 | |||
| HF-21-80014-02 | 3,000 | |||||
| 0218002.MXP | Littelfuse Inc | RoHS : Compliant | 901 | |||
| 0218008.HXP | Littelfuse Inc | RoHS : Compliant | 200 | |||
| 218008 | Littelfuse Inc | RoHS : Compliant | 100 | |||
| H218008 | Littelfuse Inc | 100 | ||||
| 744862180 | Wurth Elektronik | RoHS : Compliant | 20 | |||
![]() PEI Genesis | 351-0218-000 | ITT Interconnect Solutions |
| 231 | ||
| 218-0179-000 | ITT Interconnect Solutions |
| 64 | |||
| 135101-02-180 | Amphenol RF |
| 25 | |||
| 10-107218-01P | Amphenol Corporation |
| 2 | |||
| 10-107218-04P | Amphenol Corporation |
| 2 | |||
![]() PUI | 12.92180 | 2,770 | ||||
![]() Rutronik | CR32-1801-FL | ASJ Holdings Limited | RC1206 1,8K 1% 0,25W TK100 RoHS : Compliant |
| 780,000 | |
| CR32-1800-FY | ASJ Holdings Limited | RC1206 180R 1% 0,25W TK100 RoHS : Compliant |
| 120,000 | ||
| CR32-1804-FY | ASJ Holdings Limited | RC1206 1,8M 1% 0,25W TK100 RoHS : Compliant |
| 80,000 | ||
| CFR-25JT-52-180R | YAGEO Corporation | CFR-25 180R 5% 0,25W RoHS : Compliant |
| 75,000 | ||
| MF0207FTE52-180K | YAGEO Corporation | MF0207 180K 1% 0,6W TK50 RoHS : Compliant |
| 70,000 | ||
| 0218001.MXP | Littelfuse Inc | 1A 250V slow 5x20 glass IEC RoHS : Compliant |
| 18,000 | ||
| 0218002.MXP | Littelfuse Inc | 2A 250V slow 5x20 glass IEC RoHS : Compliant |
| 13,000 | ||
| CFR-25JB-52-180K | YAGEO Corporation | CFR-25 180K 5% 0,25W RoHS : Compliant |
| 10,000 | ||
| 0218001.HXP | Littelfuse Inc | 1A 250V slow 5x20 glass IEC RoHS : Compliant |
| 9,200 | ||
| CFR-25JT-52-180K | YAGEO Corporation | CFR-25 180K 5% 0,25W RoHS : Compliant |
| 5,000 | ||
| MF0204FTE52-180R | YAGEO Corporation | MF0204 180R 1% 0,4W TK50 RoHS : Compliant |
| 5,000 | ||
| HHV-50FT-52-180K | YAGEO Corporation | HHV-50 180K 1% 0,5W TK200 RoHS : Compliant |
| 5,000 | ||
| MF0207FTE52-180R | YAGEO Corporation | MF0207 180R 1% 0,6W TK50 RoHS : Compliant |
| 5,000 | ||
| 0218.032MXP | Littelfuse Inc | 32mA slow 5x20 glass IEC 250V RoHS : Compliant |
| 4,000 | ||
| MEM2067-02-180-00-A | Global Connector Technology | Micro SD Hinged SMT 1.80mm RoHS : Compliant |
| 1,000 | ||
![]() Braemac Americas-Symmetry | 3990252180 | Telit | LE910C1-NA INTERFACE TLB |
| 1 | |
AIAP-02-180K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMCV-0402-180-C150N-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMCV-0402-180-C101N-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-2012-180M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISM-1812-180K-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AMCV-0402-180-C800N-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AX7DAF2-1800.0000T![]() | Abracon Corporation | XTAL OSC XO 1.8000GHZ LVDS SMD RoHS : Compliant |
| 0 | ||
AIRD-02-180K![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| 218025 | Septentrio NV | Demo - CBL_AsteRx-RB |
| 0 | ||
| 218026 | Septentrio NV | PWR/ETH - CBL_AsteRx-RB |
| 0 | ||
![]() Component Electronics, Inc | 2322-180-83139 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,800 | |
| 2322-180-83434 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 4,000 | ||
| 2322-180-83169 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 4,000 | ||
| 2322-180-73223 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 2,550 | ||
| 218001.M | Littelfuse Inc | IN STOCK SHIP TODAY |
| 1,230 | ||
| BRB-2180 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 800 | ||
| 222180 | Amphenol Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 400 | ||
| 218015.XP | Littelfuse Inc | IN STOCK SHIP TODAY |
| 181 | ||
| SPC21802 | SPC Multicomp | IN STOCK SHIP TODAY |
| 100 | ||
| 0218.050 | Littelfuse Inc | IN STOCK SHIP TODAY |
| 86 | ||
| Y1121800R000T0R | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 82 | ||
| 39-01-2180 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 47 | ||
| 0039012180 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 47 | ||
| 0412180000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
| M39012/18-0014 | Amphenol Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() Flip Electronics | NCV21804DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 69,975 | ||
| NCS21801SQ3T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 41,674 | ||
| NCS21804DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 20,844 | |||
| NCV21801SQ3T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,829 | ||
| NCS21802MUTBG | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,877 | ||
| NCS21802DMR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,330 | ||
| NCS21803SQT2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,765 | ||
| NCV21802DMR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 2,624 | ||
![]() Master Electronics | 2180 | JKL Components Corporation | T-1 3/4 Wire Lead Lamp RoHS : Compliant |
| 60 | |
| TSW-218-07-S-D | Samtec Inc | Conn Unshrouded Header HDR 36 POS 5.08mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| TSW-218-08-H-D | Samtec Inc | CLASSIC PCB HEADER STRIPS RoHS : Compliant |
| 0 | ||
| TSW-218-09-L-Q-RA | Samtec Inc | Pin Header Board-to-Board Wire-to-Board 5.08 mm 2 Rows 36 Contacts Through Hole TSW Series RoHS : Compliant |
| 0 | ||
| SFSS-03-28-G-21.80-DR-NDS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 095-850-218-018 | Amphenol RF | RF / Coaxial Cable Assembly BNC Plug to HD BNC Plug Belden 4694R 75 ohm 18 458 mm Black RoHS : Compliant |
| 0 | ||
| 1218055-1 | TE Connectivity | LGH MINI SURFACE MOUNT RCPT. RoHS : Compliant |
| 0 | ||
| 218056-0320 | Molex | FEM/FEM 3CKT OTS SR CBL ASSY 2m BLK 11mm Pitch RoHS : Compliant |
| 0 | ||
| 2-1803002-0 | TE Connectivity | ANVIL COMBINATION END FEED RoHS : Not Compliant |
| 0 | ||
| 2-1803017-4 | TE Connectivity | CRIMPER INSULATION F RoHS : Not Compliant |
| 0 | ||
| 2-1803056-1 | TE Connectivity | ANVIL COMBINATION RoHS : Not Compliant |
| 0 | ||
| 2-1803143-4 | TE Connectivity | CRIMPER INSULATION O RoHS : Compliant |
| 0 | ||
| 2-1803224-4 | TE Connectivity | CRIMPER WIRE F RoHS : Not Compliant |
| 0 | ||
| 2-1803241-5 | TE Connectivity | CRIMPER WIRE F RoHS : Not Compliant |
| 0 | ||
| 2-1803246-0 | TE Connectivity | CRIMPER INSULATION F PREMIUM RoHS : Not Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C10422-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low loss cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated 4.3-10 male to 4.3-10 male low loss cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low loss a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10422-180 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10422-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10422-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements. |
| 16 | |
| PE3C10362-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 4.3-10 Male to 4.3-10 Male Low PIM Cable 180 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to 4.3-10 male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low PIM a 4.3-10 to a 4.3-10 cable assembly has male gender on end 1 and male on end 2. PE3C10362-180 can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10362-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to 4.3-10 plug cable assembly PE3C10362-180 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2180-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 36 inches. TNC Female Bulkhead to TNC Female Bulkhead Low Loss Cable 36 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC female bulkhead to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC female bulkhead to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a female gender on end 1 and female on end 2. This TNC to TNC cable is a female to female coax assembly, PE3C2180-36, can also be known as a low loss TNC jack to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC jack cable assembly PE3C2180-36 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC female bulkhead to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC jack bulkhead to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC female bulkhead low loss cable 36 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W21804LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. 2.4mm Male to N Male Cable Using PE-P086HF Coax, LF Solder. PE3W21804LF is a 2.4mm male to N male cable using PE-P086HF coax. This Pasternack 2.4mm male to N male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm N for connector 2. Our male 2.4mm to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21804LF 2.4mm male to N male cable assembly is constructed with PE-P086HF coax. | 0 | |||
| PE3W21808 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: LC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to LC Male Right Angle Cable Using RG213 Coax. PE3W21808 is a 7/16 DIN male right angle to LC male right angle cable using RG213 coax. This Pasternack 7/16 DIN male right angle to LC male right angle cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm LC for connector 2. 7/16 DIN right angle to LC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 7/16 DIN right angle to male LC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21808 7/16 DIN male right angle to LC male right angle cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W21806 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Plug, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity N Plug to Reverse Polarity SMA Female Cable Using LMR-400-UF Coax. PE3W21806 is a reverse polarity N plug to reverse polarity SMA female cable using LMR-400-UF coax. This Pasternack reverse polarity N plug to reverse polarity SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity plug N to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21806 N reverse polarity plug to SMA reverse polarity female cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21800 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. BNC Male to N Female Cable Using LMR-400 Coax. PE3W21800 is a BNC male to N female cable using LMR-400 coax. This Pasternack BNC male to N female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21800 BNC male to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21801 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini Alligator, Connector Gender 1: Clip, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: Safety Hook, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. Mini Alligator Clip to Safety Hook Sexless Cable Using 93 Ohm RG62 Coax. PE3W21801 is a Mini Alligator clip to Safety Hook sexless cable using RG62 coax. This Pasternack Mini Alligator clip to Safety Hook sexless cable assembly uses a Mini Alligator for connector 1 and a Safety Hook for connector 2. Our clip Mini Alligator to sexless Safety Hook cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3W21801 Mini Alligator clip to Safety Hook sexless cable assembly is constructed with RG62 coax. | 0 | |||
| PE3C10372-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 4.3-10 Male to N Male Low PIM Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to N male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to N male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10372-180 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10372-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10372-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10372-180 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C2180-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. TNC Female Bulkhead to TNC Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC female bulkhead to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC female bulkhead to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a female gender on end 1 and female on end 2. This TNC to TNC cable is a female to female coax assembly, PE3C2180-100CM, can also be known as a low loss TNC jack to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC jack cable assembly PE3C2180-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC female bulkhead to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC jack bulkhead to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC female bulkhead low loss cable 100 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C2180-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. TNC Female Bulkhead to TNC Female Bulkhead Low Loss Cable 150 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC female bulkhead to TNC female bulkhead low loss cable 150 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC female bulkhead to TNC female bulkhead low loss cable 150 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a female gender on end 1 and female on end 2. This TNC to TNC cable is a female to female coax assembly, PE3C2180-150CM, can also be known as a low loss TNC jack to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC jack cable assembly PE3C2180-150CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC female bulkhead to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC jack bulkhead to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC female bulkhead low loss cable 150 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C2180-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Female Bulkhead to TNC Female Bulkhead Low Loss Cable 48 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly TNC female bulkhead to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC female bulkhead to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC bulkhead cable connection on one end and TNC bulkhead cable connection on the other. Our low loss TNC to TNC cable assemblies have a female gender on end 1 and female on end 2. This TNC to TNC cable is a female to female coax assembly, PE3C2180-48, can also be known as a low loss TNC jack to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC jack cable assembly PE3C2180-48 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency TNC female bulkhead to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC jack bulkhead to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC female bulkhead low loss cable 48 inch length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3W12180 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. Mini UHF Male to Mini UHF Male Cable Using PE-C195 Coax. PE3W12180 is a Mini UHF male to Mini UHF male cable using PE-C195 coax. This Pasternack Mini UHF male to Mini UHF male cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male Mini UHF to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12180 Mini UHF male to Mini UHF male cable assembly is constructed with PE-C195 coax. | 0 | |||
| PE3W21802 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. SHV Plug Right Angle to SHV Plug Right Angle Cable Using 75 Ohm RG11 Coax. PE3W21802 is a SHV plug right angle to SHV plug right angle cable using RG11 coax. This Pasternack SHV plug right angle to SHV plug right angle cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. SHV right angle to SHV right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SHV right angle to plug SHV right angle cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W21802 SHV plug right angle to SHV plug right angle cable assembly is constructed with RG11 coax. | 0 | |||
| PE37842-180 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NMO Mount, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 180 inches. FME Plug to NMO Mount Connector Cable 180 Inch Length Using RG58 Coax., Radio frequency assembly FME plug to NMO mount connector cable 180 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to NMO mount connector cable 180 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to NMO mount cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and NMO mount cable connection on the other. Our FME to NMO mount cable assemblies have a plug gender on end 1 and sexless on end 2. This FME to NMO mount cable is a plug to sexless coax assembly, PE37842-180, can also be known as a FME male to NMO mount sexless cable assembly and will be shipped same-day as it is purchased. FME male to NMO mount sexless cable assembly PE37842-180 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to NMO mount cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to NMO mount sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE37842-180 can also be used in the other direction and will be NMO mount sexless to FME plug cable assembly if the opposite connectivity is required. FME male to NMO mount sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to NMO mount cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to NMO mount connector cable 180 inch length using RG58 coax. |
| 0 | ||
![]() Teledyne HiRel | 5962-9321801Q2A![]() | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | ||
| 5962-9218001M2A | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218001MRA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9218001MSA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-9321801QSA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-9321801QRA![]() | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | C1111HQN152-180GNE | VENKEL LTD | High-Q NP0 Capacitor;1111;HQN;1500V;18pF;�2% RoHS : Compliant | 0 | ||
| TFCR0402-16W-E-2180BT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;218R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-C-2180CT-1K | VENKEL LTD | Thin Film CR;0603;1/10W;�50PPM;218R;�0.25% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-2180FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;218R;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-2180CT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;218R;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2180DT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;218R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-2180DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;218R;�0.5% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-2180AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;218R;�0.05% RoHS : Compliant | 0 | |||
| SAFC2220C0G502-180JNE | VENKEL LTD | Safety Cap;2220;C0G;X1/Y2;18pF;�5% RoHS : Compliant | 0 | |||
| NL322522-180KT | VENKEL LTD | Wire Wound Chip Inductor;3225;18.0uH;�10% RoHS : Compliant | 0 | |||
| TFCR0805-10W-C-2180DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�50PPM;218R;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2180FT | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;218R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-2180BT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;218R;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-C-2180BT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�50PPM;218R;�0.1% RoHS : Compliant | 0 | |||
| TFCR2010-4W-C-2180DT | VENKEL LTD | Thin Film CR;2010;1/4W;�50PPM;218R;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | DS2180Q | Analog Devices Inc | Telecom IC, CMOS, PQCC44 RoHS : Not Compliant | 9,000 | ||
| DSC1123BI2-180.0000T | Microchip Technology Inc | LVDS Output Clock Oscillator, 180MHz Nom RoHS : Compliant | 5,350 | |||
| DSC1123BI2-180.0000 | Microchip Technology Inc | LVDS Output Clock Oscillator, 180MHz Nom RoHS : Compliant | 5,150 | |||
| 2-1803252-1 | TE Connectivity | Crimp Tool RoHS : Compliant | 2,450 | |||
| 2002180900 | Molex | Tool And Machinery | 2,400 | |||
INA2180A4IDGKT![]() | Texas Instruments | Operational Amplifier, 2 Func, 500uV Offset-Max, PDSO8 RoHS : Compliant | 1,500 | |||
| M28F221-80YN5 | STMicroelectronics | 830 | ||||
5962R1721801VXC![]() | Texas Instruments | Serial Switch/Digital Sensor, 12 Bit(s), 2Cel, Rectangular, Surface Mount RoHS : Compliant | 810 | |||
| LM99CIMM-J7002180 | Texas Instruments | 640 | ||||
| 4EC-382180000233121 | Intel Corporation | 310 | ||||
5962-9221802MRX![]() | Texas Instruments | Bus Driver, FCT Series, 1-Func, 8-Bit, True Output, CMOS, CDIP20 | 150 | |||
5962-9321801Q2A![]() | Texas Instruments | Bus Driver, ABT Series, 1-Func, 8-Bit, True Output, BICMOS, CQCC20 RoHS : Not Compliant | 81 | |||
| PK8071305121801S R | Intel Corporation | 46 | ||||
| 5CC-523960000282180 | Intel Corporation | 20 | ||||
| 2-00GHZ_E2180_DC | Intel Corporation | 14 | ||||
![]() Waytek, Inc. | 21806-6 | FTZ Industries | FTZ Industries 21806-6 extra heavy-duty heat shrink kit refill is red adhesive-lined tubing with a .400" size for rugged cable, splice, and termination protection. Its thick-wall construction supports strong moisture sealing and abrasion resistance, and this refill pack includes 10 pieces for restocking heat-shrink kits. |
| 620 | |
| AHDP02-18-06PN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP02-18-06PN-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 18, 6-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 590 | ||
| AHDP02-18-08PN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP02-18-08PN-SRA DuraMate AHDP sealed panel-mount receptacle is a shell size 18, 8-position pin circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 172 | ||
| 680-12180559 | Rennsteig Tools Inc | Removal Tool Metri-Pack 150 & 280 PULL TO SEAT 12180559 DUCON GT 150 J-38125-559 |
| 10 | ||
| 218036-0002 | Unity Manufacturing Co Ltd | 6" Black Post-Mount Spotlight Unity 218036-0002 LED 12V, 30 Watts &50,000 hrs lamp life |
| 1 | ||
| AHDP02-18-06PN-SRAC0 | Amphenol Sine Systems | Amphenol Sine Systems AHDP02-18-06PN-SRAC030 DuraMate AHDP sealed panel-mount receptacle is a shell size 18, 6-position pin circular connector with normal diameter seal and smooth ring adapter C030 variant. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 0 | ||
![]() Win Source Electronics | TPS62180YZFT![]() | Texas Instruments | IC REG BUCK ADJ 6A SYNC 24DSBGA / Conv DC-DC 4V to 15V Synchronous Step Down Single-Out 0.9V to 6V 6A 24-Pin DSBGA T/R RoHS : Compliant |
| 67,630 | |
| INA2180A2IDGK | Texas Instruments | Current Sense Amplifier 26V Bidirectional 50V/V Gain VSSOP-8 |
| 30,000 | ||
OPA2180ID![]() | Texas Instruments | IC OPAMP ZERO-DRIFT 2 CIRC 8SOIC RoHS : Compliant |
| 25,752 | ||
| 0218015.MXEP | Littelfuse Inc | 218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse RoHS : Compliant |
| 15,000 | ||
| 0218001.MXP | Littelfuse Inc | 218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse | FUSE GLASS 1A 250VAC 5X20MM RoHS : Compliant |
| 12,240 | ||
| 0218005.MXP | Littelfuse Inc | FUSE GLASS 5A 250VAC 5X20MM RoHS : Compliant |
| 10,000 | ||
INA2180A2IDSGR![]() | Texas Instruments | IC CURRENT SENSE 2 CIRCUIT 8WSON / Current Sense Amplifier 2 Circuit Rail-to-Rail 8-WSON (2x2) RoHS : Compliant |
| 9,000 | ||
| 0218016.MXP | Littelfuse Inc | FUSE GLASS 16A 250VAC 5X20MM RoHS : Compliant |
| 8,970 | ||
| 021806.3MXP | Littelfuse Inc | 218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse | FUSE GLASS 6.3A 250VAC 5X20MM RoHS : Compliant |
| 7,000 | ||
OPA2180IDGK![]() | Texas Instruments | 0.1-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift OPERATIONAL AMPLIFIERS RoHS : Compliant |
| 5,512 | ||
| 0218002.MXP | Littelfuse Inc | FUSE GLASS 2A 250VAC 5X20MM / 218 Series, 5 x 20 mm, Time-Lag (Slo-Blo®) Fuse RoHS : Compliant |
| 5,000 | ||
| MAX2180AETG/V+T | Maxim Integrated Products | IC RF AMP AM FM 162.5MHZ 24TQFN |
| 5,000 | ||
OPA2180QDGKRQ1![]() | Texas Instruments | IC OPAMP ZERO-DRIFT 2CIRC 8VSSOP / 0.1-uV/C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifiers RoHS : Compliant |
| 5,000 | ||
INA2180A3IDGKT![]() | Texas Instruments | IC CURR SENSE 2 CIRCUIT 8VSSOP / Current Sense Amplifier 2 Circuit Rail-to-Rail 8-VSSOP RoHS : Compliant |
| 2,800 | ||
INA2180A3IDGKR![]() | Texas Instruments | IC CURR SENSE 2 CIRCUIT 8VSSOP / Current Sense Amplifier 2 Circuit Rail-to-Rail 8-VSSOP RoHS : Compliant |
| 2,720 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |