| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
2136AFVLLPR nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() ComSIT USA | BI31002136 | MULTICIRCUITS I | AVAILABLE EU | 136 | ||
| M021367C001 | MAQIM SA DE CV | AVAILABLE EU | 49 | |||
![]() PEI Genesis | 132136 | Amphenol RF |
| 7 | ||
![]() PUI | 12.92136 | 36,173 | ||||
![]() Braemac Americas-Symmetry | 76002136 | Digi International Inc | TX40 5G Accessory Kit: Power Supply,12Vdc 2.5A 100-240Vac, Ind. temp, Changeable plug tips, Ethernet Cable, Antenna (1) Wi-Fi 2.4/5GHz MIMO 2x2, Black, FAKRA Code I, 3m cable, Antenna (2) 5-in-1 Cellu |
| 0 | |
| ACM-21-361M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | CY62136FV30LL-45ZSXAT | Cypress Semiconductor | Stock RoHS : Compliant | 89,830 | ||
| CY62136FV30LL-45ZSXIT | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 68,000 | ||
| MMUN2136LT1G | onsemi | Stock, Ship Today RoHS : Compliant | 30,000 | |||
R5F2136ACNFA#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 3,070 | |||
R5F21368SDFP#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 2,953 | |||
| CY62136EV30LL-45ZSXIT | Cypress Semiconductor | Stock RoHS : Compliant | 2,239 | |||
| CY62136EV30LL-45BVXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 2,002 | ||
| R5F2136CMYFA#50 | Renesas Electronics Corporation | Stock | 1,000 | |||
R5F21368SNFA#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 909 | |||
R5F2136AMNFP#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 906 | |||
| R5F21367CN159FA#30 | Renesas Electronics Corporation | Stock | 654 | |||
R5F21367CNFA#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 583 | |||
R5F2136CMNFA#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 502 | |||
R5F2136CMNFP#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 262 | |||
R5F21368CNFA#30![]() | Renesas Electronics Corporation | Stock RoHS : Compliant | 86 | |||
![]() Pasternack Enterprises US | PE3W03521-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MMCX Plug Right Angle Cable 36 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to MMCX plug right angle cable 36 inch length using RG188 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MMCX plug right angle cable 36 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle MMCX cable connection on the other. Our SMA to right angle MMCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03521-36 can also be known as a SMA plug to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W03521-36 RF cable has a PTFE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. SMA plug to MMCX male cable assembly PE3W03521-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MMCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W03521-36 can also be used in the other direction and will be a right angle MMCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX RF cable assembly as per your requirements. |
| 1,013 | |
| PE3W02621-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-SR405FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02621-36 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W02621-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. |
| 349 | ||
| PE3C8421-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum N Male to N Female Bulkhead Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male to N female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8421-36 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C8421-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8421-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8421-36 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 60 | ||
| PE3W21364 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG400 Coax. PE3W21364 is a N male to N male right angle cable using RG400 coax. This Pasternack N male to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21364 N male to N male right angle cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W21363 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Cable Using LMR-240 Coax. PE3W21363 is a N male right angle to N male cable using LMR-240 coax. This Pasternack N male right angle to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21363 N male right angle to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21366 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. SMA Female to SMP Female Cable Using PE-SR047AL Coax. PE3W21366 is a SMA female to SMP female cable using PE-SR047AL coax. This Pasternack SMA female to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our female SMA to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W21366 SMA female to SMP female cable assembly is constructed with PE-SR047AL coax. | 0 | |||
| PE3W21360 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Male Cable Using LMR-400-UF Coax. PE3W21360 is a SMA male right angle to BNC male cable using LMR-400-UF coax. This Pasternack SMA male right angle to BNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21360 SMA male right angle to BNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W22136/HS2 | Pasternack Enterprises | 0 | ||||
| PE3M0321-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 36 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0321-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0321-36 RF cable has a FEP jacket of 0.163-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0321-36 between-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to SMA female cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0321-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W05213-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. TNC Male to TNC Female Bulkhead Cable 6 Inch Length Using RG316-DS Coax., Radio frequency assembly TNC male to TNC female bulkhead cable 6 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC female bulkhead cable 6 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our TNC to TNC cable assembly has male gender on end 1 and female on end 2. PE3W05213-6 can also be known as a TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.570 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. TNC plug to TNC jack cable assembly PE3W05213-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has crimp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W05213-6 RF cable are available on our downloadable PDF datasheet.PE3W05213-6 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W21369 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-141FL-NM, RF Cable Type: PE-141FL-NM, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using PE-141FL-NM. PE3W21369 is a SMA male right angle to SMA female bulkhead cable using PE-141FL-NM coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W21369 SMA male right angle to SMA female bulkhead cable assembly is constructed with PE-141FL-NM coax. | 0 | |||
| PE3W21365/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG174 Non-Magnetic Coax with HeatShrink. PE3W21365/HS is a SMA male to SMA male cable using RG174 Non-Magnetic coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21365/HS SMA male to SMA male cable assembly is constructed with RG174 Non-Magnetic coax. | 0 | |||
| PE3W21368LF | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Snap-On QN Male to BNC Male Cable Using LMR-240 Coax, LF Solder. PE3W21368LF is a QN male to BNC male cable using LMR-240 coax. This Pasternack QN male to BNC male cable assembly uses a 50 Ohm QN for connector 1 and a 50 Ohm BNC for connector 2. Our male QN to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21368LF QN male to BNC male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W21365 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174NM, RF Cable Type: RG174 Non-Magnetic, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using RG174 Non-Magnetic Coax. PE3W21365 is a SMA male to SMA male cable using RG174 Non-Magnetic coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21365 SMA male to SMA male cable assembly is constructed with RG174 Non-Magnetic coax. | 0 | |||
| PE3M0421-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Socket Cable 36 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0421-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0421-36 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0421-36 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0421-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. |
| 0 | ||
![]() Vyrian | V62/13603-01XE-T![]() | Texas Instruments | Low Skew Clock Driver, CDCV Series, 5 True Output(s), 0 Inverted Output(s), PDSO24 RoHS : Compliant | 9,205 | ||
V62/13606-01XE![]() | Texas Instruments | FIFO, 4KX18, 11ns, Synchronous, CMOS, PQFP64 RoHS : Compliant | 8,671 | |||
V62/13608-01XE![]() | Texas Instruments | Buffer/Inverter Based MOSFET Driver, 4A, BICMOS, PDSO6 RoHS : Compliant | 7,380 | |||
V62/13612-01XE![]() | Texas Instruments | Adjustable Positive LDO Regulator, 0.9V Min, 5V Max, PQCC20 RoHS : Compliant | 6,823 | |||
V62/13605-01XE![]() | Texas Instruments | OR-AND Gate, LVC/LCX/Z Series, 1-Func, 3-Input, CMOS, PDSO6 RoHS : Compliant | 6,492 | |||
V62/13604-01XE![]() | Texas Instruments | Switching Regulator, Voltage-mode, 14A, 700kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 6,368 | |||
V62/13607-01XE![]() | Texas Instruments | Switching Regulator, Voltage-mode, 20A, 600kHz Switching Freq-Max RoHS : Compliant | 6,081 | |||
V62/13610-01XE-T![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, PDSO8 RoHS : Compliant | 5,393 | |||
V62/13611-01XE![]() | Texas Instruments | Comparator, 1 Func, 9000uV Offset-Max, 1300ns Response Time, BIPolar, PDSO5 RoHS : Compliant | 5,314 | |||
V62/13602-01XE![]() | Texas Instruments | Bus Transceiver, AVC Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 5,051 | |||
V62/13604-01XE-T![]() | Texas Instruments | Switching Regulator, Voltage-mode, 14A, 700kHz Switching Freq-Max, PDSO28 RoHS : Compliant | 4,793 | |||
V62/13611-01XE-T![]() | Texas Instruments | Comparator, 1 Func, 9000uV Offset-Max, 1300ns Response Time, PDSO5 RoHS : Compliant | 4,355 | |||
V62/13610-01XE![]() | Texas Instruments | Operational Amplifier, 1 Func, 7000uV Offset-Max, PDSO8 RoHS : Compliant | 3,266 | |||
V62/13603-01XE![]() | Texas Instruments | Low Skew Clock Driver, CDCV Series, 5 True Output(s), 0 Inverted Output(s), PDSO24 RoHS : Compliant | 3,182 | |||
V62/13602-01XE-T![]() | Texas Instruments | Bus Transceiver, AVC Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 3,047 | |||
![]() Win Source Electronics | TPS62136RGX | Texas Instruments | Step-Down Converter 3V to 17V 4A Adjustable Frequency 12-VQFN |
| 99,000 | |
TPS62136RGXT![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 4A 11VQFN / Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 4A 11-VFQFN RoHS : Compliant |
| 60,000 | ||
TPS62136RGXR![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 4A 11VQFN / 1-MHz High Accuracy 3-V to 17-V 4-A Step-Down Converters with DCS Control RoHS : Compliant |
| 60,000 | ||
| MP2136EG-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 1A 6QFN RoHS : Compliant |
| 49,122 | ||
| IR2136SPBF | Infineon Technologies AG | 3-PHASE BRIDGE DRIVER | IC DRIVER BRIDGE 3PHASE 28SOIC RoHS : Compliant |
| 47,850 | ||
| IR2136STR | Infineon Technologies AG | IC GATE DRVR HALF-BRIDGE 28SOIC / Half-Bridge Gate Driver IC Inverting 28-SOIC |
| 46,440 | ||
| IR2136STRPBF | Infineon Technologies AG | IC DRIVER BRIDGE 3PHASE 28SOIC RoHS : Compliant |
| 45,040 | ||
| RTD2136N-CG | Realtek Semiconductor |
| 11,292 | |||
| LPC2136FBD64 | Nexperia | Single-chip 16/32-bit microcontrollers; 32/64/512 kB ISP/IAP Flash with 10-bit ADC and DAC |
| 4,808 | ||
R5F21366CNFP#30![]() | Renesas Electronics Corporation | IC MCU 16BIT 32KB FLASH 64LFQFP / R8C series Microcontroller IC 16-Bit 20MHz 32KB (32K x 8) FLASH 64-LFQFP (10x10) RoHS : Compliant |
| 4,000 | ||
R5F21366CNFP![]() | Renesas Electronics Corporation | RENESAS MCU |
| 3,700 | ||
| LPC2136FBD64/01 | Nexperia |
| 3,200 | |||
| ADSP-21363KBCZ-1AA | Analog Devices Inc | IC DSP 32BIT 333MHZ 136CSBGA RoHS : Compliant |
| 1,200 | ||
ADSP-21369KBPZ-3A![]() | Analog Devices Inc | IC DSP 32BIT 400MHZ 256-BGA RoHS : Compliant |
| 1,000 | ||
ADSP-21369KBPZ-2A![]() | Analog Devices Inc | IC DSP 32BIT 333MHZ 256-BGA RoHS : Compliant |
| 440 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |