| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
206HHA-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | SF-1206HV40M-2 | Bourns Inc | FUSE BOARD MOUNT 40A 35VDC 1206 RoHS : Compliant |
| 5,916 | |
| SF-1206HV40M-2 | Bourns Inc | FUSE BOARD MOUNT 40A 35VDC 1206 RoHS : Compliant |
| 5,916 | ||
| SF-1206HI250M-2 | Bourns Inc | FUSE BOARD MOUNT 2.5A 32VDC 1206 RoHS : Compliant |
| 1,695 | ||
| SF-1206HI250M-2 | Bourns Inc | FUSE BOARD MOUNT 2.5A 32VDC 1206 RoHS : Compliant |
| 1,695 | ||
| SF-1206HI250M-2 | Bourns Inc | FUSE BOARD MOUNT 2.5A 32VDC 1206 RoHS : Compliant |
| 1,695 | ||
C1206H102J5GACTU![]() | KEMET Corporation | CAP CER 1000PF 50V C0G/NP0 1206 RoHS : Compliant |
| 211 | ||
C1206H102J5GACTU![]() | KEMET Corporation | CAP CER 1000PF 50V C0G/NP0 1206 RoHS : Compliant |
| 211 | ||
C1206H102J5GACTU![]() | KEMET Corporation | CAP CER 1000PF 50V C0G/NP0 1206 RoHS : Compliant |
| 211 | ||
| 805-003-22MT19-206HE | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 159 | ||
| 805-003-22NF19-206HD | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 159 | ||
| 805-003-22ZC18-206HD | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 130 | ||
| 805-004-07Z118-206HF | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 130 | ||
| 805-004-12Z119-206HC | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 96 | ||
| 805-004-12ZB19-206HB | JRH ELECTRONICS | Triple-Start Mighty Mouse Circul |
| 78 | ||
| 390FB001N1206H | JRH ELECTRONICS | CONN BACKSHELL |
| 31 | ||
![]() Avnet Americas | LI1206H151R-10 | Qnity Laird | Ferrite Bead, 1206 [3216 Metric], 150 ohm, 800 mA, LI Series, 0.15 ohm - Tape and Reel (Alt: LI1206H151R-10) RoHS : Compliant |
| 12,000 | |
| F1206HI2500V032TM | AEM Inc | - Tape and Reel (Alt: F1206HI2500V032TM) RoHS : Compliant |
| 6,000 | ||
| F1206HI1500V063TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 1.5 A, 63 VDC, 1206 [3216 Metric], SolidMatrix HI - Tape and Reel (Alt: F1206HI1500V063TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI2000V063TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 2 A, 63 VDC, 1206 [3216 Metric], SolidMatrix HI - Tape and Reel (Alt: F1206HI2000V063TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI3500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3.5 A, 32 VDC, 1206 [3216 Metric], SolidMatrix HI - Tape and Reel (Alt: F1206HI3500V032TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI3000V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3 A, 32 VDC, 1206 [3216 Metric], SolidMatrix HI - Tape and Reel (Alt: F1206HI3000V032TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HB20V024TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 20 A, 24 VDC, 1206 [3216 Metric], SolidMatrix HB - Tape and Reel (Alt: F1206HB20V024TM) RoHS : Not Compliant |
| 6,000 | ||
| F1206HI4500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 4.5 A, 32 VDC, 1206 [3216 Metric], SolidMatrix HI - Tape and Reel (Alt: F1206HI4500V032TM) RoHS : Not Compliant |
| 6,000 | ||
| 67996-206HLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 2 Rows, 6 Contacts, Through Hole, FCI BergStik 67996 - Bag (Alt: 67996-206HLF) RoHS : Compliant |
| 5,600 | ||
| 68000-206HLF | Amphenol Corporation | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 6 Contacts, Through Hole, FCI BergStik II 68000 - Bag (Alt: 68000-206HLF) RoHS : Compliant |
| 4,500 | ||
| SF-1206HV40M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206HV40M-2) RoHS : Not Compliant |
| 3,000 | ||
| F1206HC25A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 25 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC - Tape and Reel (Alt: F1206HC25A0TM) RoHS : Not Compliant |
| 3,000 | ||
| QF1206H2A00T | AEM Inc | Fuse, Automotive, Chip, Slow Blow, 2 A, 63 VDC, 3.2mm x 1.6mm x 0.97mm, SolidMatrix QF1206H - Tape and Reel (Alt: QF1206H2A00T) RoHS : Not Compliant |
| 3,000 | ||
| F1206HC15A0TM | AEM Inc | Fuse, Surface Mount, 15 A, High Current, 35 V, 1206 [3216 Metric], SolidMatrix HC Series - Tape and Reel (Alt: F1206HC15A0TM) RoHS : Not Compliant |
| 3,000 | ||
| TMMH-112-06-H-D | Samtec Inc | Pin Header, Board-to-Board, 2 Rows, 24 Contacts, Through Hole, TMMH Series, Unshrouded, Straight - Bulk (Alt: TMMH-112-06-H-D) RoHS : Compliant |
| 41 | ||
![]() Newark | SF-1206HH15M-2 | Bourns Inc | FUSE, 15A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 2,542 | |
| SF-1206HH15M-2 | Bourns Inc | FUSE, 15A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 2,542 | ||
| SF-1206HH1200R-2 | Bourns Inc | SMD FUSE, 12A, 50V, 1206; RoHS : Compliant |
| 2,530 | ||
| SF-1206HH1200R-2 | Bourns Inc | SMD FUSE, 12A, 50V, 1206; RoHS : Compliant |
| 2,530 | ||
| SF-1206HV40M-2 | Bourns Inc | FUSE, 40A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 2,365 | ||
| SF-1206HV40M-2 | Bourns Inc | FUSE, 40A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 2,365 | ||
| SF-1206HV40M-2 | Bourns Inc | FUSE, 40A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 1,774 | ||
| SF-1206HV40M-2 | Bourns Inc | FUSE, 40A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 1,774 | ||
| SF-1206HH15M-2 | Bourns Inc | FUSE, 15A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 1,000 | ||
| SF-1206HI250M-2 | Bourns Inc | FUSE, 2.5A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 832 | ||
| SF-1206HI250M-2 | Bourns Inc | FUSE, 2.5A, HIGH INRUSH WITHSTAND, 1206; RoHS : Compliant |
| 832 | ||
| F1206HC12A0TM | AEM Inc | FUSE, HIGH CURRENT, 12A, 35VDC, 1206; RoHS : Compliant |
| 600 | ||
| F1206HC12A0TM | AEM Inc | FUSE, HIGH CURRENT, 12A, 35VDC, 1206; RoHS : Compliant |
| 600 | ||
| F1206HI8000V024TM | AEM Inc | FUSE, HIGH INRUSH, 8A, 24VDC, 1206; RoHS : Compliant |
| 470 | ||
| F1206HI8000V024TM | AEM Inc | FUSE, HIGH INRUSH, 8A, 24VDC, 1206; RoHS : Compliant |
| 470 | ||
![]() RS | FN9244EB-12-06HI | TE Connectivity | 12 AMP EXCELLENT PERFORMANCE IEC INLET FILTER WITH EARTH LINE CHOKE RoHS : Compliant |
| 120 | |
| FN9222B-12-06HI (801847) | TE Connectivity | IEC INLET, 1-PH, MEDICAL, 12A, FAST-ON, HOT INLET, NO RESISTOR, FN 9222 SERIES |
| 90 | ||
| V5.5MLA1206H | Littelfuse Inc | ML SERIES 9.3V 150A 0.4J 17.5V CLAMP 1206 CERAMIC TRANSIENT VOLTAGE SUPPRESSOR RoHS : Compliant |
| 23 | ||
| 5SJ4120-6HG40 | Siemens | CIRCUIT BREAKER 1 P 20A C CURVE DIN RAIL MOUNT UL489 TYPE HSJ 240VAC/60VDC RoHS : Compliant |
| 2 | ||
| P206-HA (PER.P206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 2 | ||
| WB19-0206H | Quest Technology International Inc | RACK, OPEN, WALL MOUNT, SWING FRAME,19 IN,2U/3.5IN, BLACK,15 LB CAP, STEEL, WB SERIES |
| 1 | ||
| F-206-H (PER.F206-HT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| FS-206-H (PER.FS206-HT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| FD-206-H (PER.FD206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| PA-206-HT (PER.PA206-HT) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| FT-206-H (PER.CFT206-HA) | PEER Bearing Company | PEER AGRICULTURE (AG) |
| 0 | ||
| P-206-HA-PBT (PER.TP206-HA) | PEER Bearing Company | PEER MOUNTED AGRICULTURE (MA) |
| 0 | ||
| T-206-H-17/32 (PER.T206-HA) | PEER Bearing Company | PEER MOUNTED AGRICULTURE (MA) |
| 0 | ||
| T-206-H-5/16 (PER.T206-HA-B) | PEER Bearing Company | PEER MOUNTED HOUSING (MH) |
| 0 | ||
| FT-206-H-PBT (PER.TFT206-HA) | PEER Bearing Company | PEER MOUNTED AGRICULTURE (MA) |
| 0 | ||
![]() Microchip Technology Inc | DSPIC33CDV256MP206-H/M9VAO | Microchip Technology Inc | dsPIC33C 100MHz, 256K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-07-14 RoHS : Compliant |
| 1,800 | |
| DSPIC33CH512MP206-H/PT | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin, 512KB Flash, TQFP, Projected EOL: 2045-11-27 RoHS : Compliant |
| 1,519 | ||
| DSPIC33CDV128MP206-H/M9VAO | Microchip Technology Inc | dsPIC33C 100MHz, 128K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-09-04 RoHS : Compliant |
| 1,270 | ||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | 70MIPS, 512KB Flash, 48KB RAM, OpAmps, PTG, 64-pins, up to 150C, TQFP, Projected EOL: 2040-11-13 RoHS : Compliant |
| 320 | ||
| MPV21004-206-HSI | Microchip Technology Inc | Si TVAR Non Hermetic MMSM, Projected EOL: 2046-08-15 - Contact for Pricing | 0 | |||
| PIC24EP128GP206-H/MR | Microchip Technology Inc | 16 Bit MCU, 128KB Flash, 16KB RAM, 60MHz, 64Pin, CAN, 3 OpAmp, 4 Comp, PTG, CTMU, QFN, Projected EOL: 2041-07-20 RoHS : Compliant |
| 0 | ||
| PIC24EP128MC206-H/MR | Microchip Technology Inc | 16 Bit MCU, 128KB Flash, 16KB RAM, 60MHz, 64Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG, QFN, Projected EOL: 2041-07-20 RoHS : Compliant |
| 0 | ||
| PIC24EP128GP206-H/PT | Microchip Technology Inc | 16 Bit MCU, 128KB Flash, 16KB RAM, 60MHz, 64Pin, CAN, 3 OpAmp, 4 Comp, PTG, CTMU, TQFP, Projected EOL: 2041-07-20 RoHS : Compliant |
| 0 | ||
| DSPIC33CH64MP206-H/PT | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin 64KB Flash, TQFP, Projected EOL: 2045-10-07 RoHS : Compliant |
| 0 | ||
| DSPIC33CH64MP206-H/MR | Microchip Technology Inc | dsPIC33 100MHz Dual Core 64-Pin 64KB Flash, QFN, Projected EOL: 2045-10-07 RoHS : Compliant |
| 0 | ||
| DSPIC33CH128MP206-H/PT | Microchip Technology Inc | dsPIC33 100MHz Dual Core, 64-Pin 128KB Flash, TQFP, Projected EOL: 2045-10-07 RoHS : Compliant |
| 0 | ||
| DSPIC33CH128MP206-H/MR | Microchip Technology Inc | dsPIC33 100MHz Dual Core 64-Pin 128KB Flash, QFN, Projected EOL: 2045-10-07 RoHS : Compliant |
| 0 | ||
| DSPIC33EP128MC206-H/MR | Microchip Technology Inc | 16 Bit DSC, 128KB Flash, 16KB RAM, 60MHz, 64Pin, MCPWM,QEI, 3 OpAmp, 4 Comp, PTG, QFN, Projected EOL: 2041-07-20 - Contact for Pricing RoHS : Compliant | 0 | |||
| DSPIC33CDV256MP206-H/M9 | Microchip Technology Inc | dsPIC33C 100MHz, 256K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-03-01 RoHS : Compliant |
| 0 | ||
| DSPIC33CDV128MP206-H/M9 | Microchip Technology Inc | dsPIC33C 100MHz, 128K Flash, 24K RAM, 3-Phase FET Driver, LDO, 64-Pin, VGQFN, Projected EOL: 2051-03-01 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 0206HPP188-BO | MISC. INDUSTRIAL HRD | 10,000 | |||
| M55155/206H02 | Staffall | 200 | ||||
| NAS1352-06H12P | NAS Screws | 40 | ||||
| NAS1352-06H12P | B&B Specialties Inc | 39 | ||||
| NAS1352-06H10P | NAS Screws | 11 | ||||
| NAS1352-06H8P | B&B Specialties Inc | 5 | ||||
| NAS1352-06H4P | NAS Screws | 5 | ||||
| NAS1352-06H6P | B&B Specialties Inc | 5 | ||||
![]() Rochester Electronics | PT78NR206H | Texas Instruments | Switching Regulator, Voltage-mode, 700kHz Switching Freq-Max, Hybrid RoHS : Compliant |
| 22 | |
| V18MLA1206H23 | Harris Semiconductor | Varistor, 0.4J, Surface Mount RoHS : Not Compliant |
| 222 | ||
![]() TME | 68000-206HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; PIN: 6; THT; BERGSTIK II RoHS : Compliant |
| 4,433 | |
| 78208-206HLF | Amphenol Corporation | Connector: wire-board; male; PIN: 6; angled; soldering; 2.54mm |
| 2,000 | ||
| 67996-206HLF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; PIN: 6; THT; BERGSTIK II RoHS : Compliant |
| 1,839 | ||
| 68602-206HLF | Amphenol Corporation | Connector: pin strips; pin header; male; PIN: 6; THT; 3A; straight |
| 505 | ||
| 68020-206HLF | Amphenol Corporation | Connector: pin strips; pin header; male; PIN: 6; soldering; angled |
| 414 | ||
| PC 081206H | FIBOX | Enclosure: multipurpose; X: 80mm; Y: 120mm; Z: 60mm; EURONORD; grey |
| 9 | ||
| ADW1206HT | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 6VDC; SPST-NO; Icontacts max: 16A |
| 0 | ||
| CA3206H1300 | Cvilux Corporation | Connector: Micro-MaTch RoHS : Compliant |
| 0 | ||
| 712-00206 HELATAPE TEX | HellermannTyton | Tape: textile; W: 19mm; L: 10m; Thk: 0.31mm; grey; 64N/cm; 10%; cotton |
| 0 | ||
| ADW1206HTW | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 6VDC; SPST-NO; Icontacts max: 16A RoHS : Compliant |
| 0 | ||
| ECLM-12-06 HD | igus Inc | Bearing: slide; joint; with flange; Øout: 24mm; Øint: 12mm; -30÷80°C |
| 0 | ||
| VTD206H | Excelitas Technologies Corporation | Photodiode; THT; 925nm; 750÷1100nm; 30nA RoHS : Compliant |
| 0 | ||
| ADW1206HLW | Panasonic Electronic Components | Relay: electromagnetic; Ucoil: 6VDC; SPST-NO; Icontacts max: 16A |
| 0 | ||
| V68MLA1206H | Littelfuse Inc | Varistor: metal-oxide; SMD; 1206; 50VAC; 68VDC; 1J; 180A; 100pF RoHS : Compliant |
| 0 | ||
| VJ1206H104KXAAT | Vishay Intertechnologies | Capacitor: ceramic; 100nF; 50V; X8R; ±10%; SMD; 1206 RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BH76206HFV-TR![]() | ROHM Semiconductor | RoHS : Compliant |
| 300 | |
![]() ComSIT USA | LI1206H121R10 | STEWARD/LAIRD TECHNOLOGIES | AVAILABLE EU | 284 | ||
![]() ComSIT USA | V33MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 33V, 0.8J, Surface Mount RoHS : Compliant | 100,000 | ||
| V42MLA1206H | Littelfuse Inc | Varistor RoHS : Compliant | 60,000 | |||
| LI1206H121R10 | Qnity Laird | Ferrite Chip, 1 Function(s), 0.8A, 2 Pin(s) RoHS : Compliant | 27,202 | |||
| V14MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 14V, 0.05J, Surface Mount RoHS : Compliant | 17,500 | |||
| VJ1206H333KXABE31 | Vishay Intertechnologies | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 10% +Tol, 10% -Tol, X8R, 15% TC, 0.033uF, Surface Mount, 1206 RoHS : Compliant | 6,000 | |||
| V56MLA1206H | Littelfuse Inc | MULTILAYER TRANSIENT VOLTAGE SURGE SUPPRESSOR Varistor, 56V, 1J, Surface Mount RoHS : Compliant | 2,500 | |||
| V68MLA1206H | Littelfuse Inc | SURFACE MOUNT MULTILAYER VARISTOR Varistor, 68V, 1J, Surface Mount RoHS : Compliant | 1,630 | |||
![]() Interstate Connecting Components | 380AB001NF1206H | MISC MIL-AERO | BACKSHELL | 1 | ||
| 390FB001N1206H | Glenair Inc | 38999 sI&II EMI BS 45 DEG SZ12or13 CAD/eNi RoHS : Not Compliant |
| 0 | ||
| 370AS001B2206H3 | Glenair Inc | ENVRIONMENTAL BACKSHELL STRAIGHT SPIN COUPLING RoHS : Not Compliant |
| 0 | ||
| 370FS001N2206H3 | Glenair Inc | ENVIRONMENTAL BACKSHELL STRAIGHT SPIN COUPLING |
| 0 | ||
| 360DA002B1206H | Glenair Inc | NON-ENVIRONMENTAL BS 90 DEG W STRAIN RELIEF |
| 0 | ||
| 370DA002N1206H | Glenair Inc | ENVIROMENTAL BACKSHELL 90 DEG DIRECT COUPLING RoHS : Not Compliant |
| 0 | ||
| 69192-206HTLF | Amphenol FCi | BS II DR-69192-206HTLF RoHS : Compliant | 0 | |||
| 360FA002NF1206H | Glenair Inc | NON-ENVIRONMENTAL BS 90 DEG W STRAIN RELIEF | 0 | |||
| 290WS004Z1-1206H3 | Glenair Inc | GEO-MARINE ADAPTER/COVERS RoHS : Compliant | 0 | |||
| 390FA001N1206H | Glenair Inc | 38999 sI&II EMI BS 90 DEG SZ12or13 CAD/eNi RoHS : Not Compliant |
| 0 | ||
| 390AS005NF1206H6 | Glenair Inc | 5015 EMI BS STR SZ12 Al/Cad | 0 | |||
| 390AS001NF1206H3 | Glenair Inc | 5015 EMI BS STR SZ12 Al/Cad RoHS : Not Compliant |
| 0 | ||
| 390AS053NC1206H3 | Glenair Inc | 5015 EMI BS STR SZ12 Zn-COBOLT | 0 | |||
| TX40AB00-1206H | TE Connectivity | CY6655-000 |
| 0 | ||
| 370FS001B1206H3 | Glenair Inc | ENVIRONMENTAL BACKSHELL STRAIGHT SPIN COUPLING RoHS : Not Compliant | 0 | |||
![]() NexGen Digital | P1206H2005BGT | Vishay Huntington | 71 | |||
![]() PEI Genesis | 71-533722-06H | Amphenol Corporation |
| 248 | ||
| 75-068232-06H | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 79257-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 13,585 | |
| 68001-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 5,972 | ||
| 67997-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 5,803 | ||
| 68691-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 3,982 | ||
| 78548-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,751 | ||
| 78208-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 1,320 | ||
| 68602-206HLF | Amphenol FCi | Cable Assembly |
| 336 | ||
| 68002-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 300 | ||
| 68020-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 273 | ||
| 68016-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 132 | ||
| 69190-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 66 | ||
| 67996-206HLF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 42 | ||
| AT206H | NKK Switches | LW ILLUM ROCKER BEZEL |
| 25 | ||
| M85049/142-06HU | Glenair Inc | SHRINK BOOTS - SHAPE MEMORY PRODUCTS RoHS : Compliant |
| 15 | ||
| 443DJ010NF1206-HK | Glenair Inc | ACCESSORIES - BANDING/CRIMP ADAPTER |
| 3 | ||
![]() PUI | 4172-06HB | 1,000 | ||||
![]() Richardson RFPD | FCP1206H472J-H1 | Knowles CDE | Cap Film 0.0047uF 50V PPS 5% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | |
| 206H-034-00001N | Winchester Interconnect | IN SERIES ADAPTER RoHS : Compliant | 0 | |||
ADXL206HDZ![]() | Analog Devices Inc | Accelerometer Dual ±5g 5V 296mV/g to 328mV/g 8-Pin RoHS : Compliant |
| 0 | ||
| MPP4201-206-HS | Microchip Technology Inc | Diode PIN Attenuator/Switch 70V 2-Pin Case 206 T/R RoHS : Compliant | 0 | |||
| MPP4204-206-HS | Microchip Technology Inc | Diode PIN Switch 25V 2-Pin Case 206 T/R RoHS : Compliant | 0 | |||
| FCP1206H682J-H1 | Knowles CDE | Cap Film 0.0068uF 50V PPS 5% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | ||
| H141206HLL | Amphenol PCTEL | ANTENNA UNIT RoHS : Compliant | 0 | |||
| LPF1206HP0512LTT | Kyocera AVX Components | High Performance Low Pass Filter RoHS : Compliant | 0 | |||
| FCP1206H332G-H1 | Knowles CDE | Cap Film 0.0033uF 50V PPS 2% (3.2 X 1.6 X 0.9mm) S RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | SF-1206HIA200M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 15,600 | ||
| P1206HB 8K66 1% | Vishay Intertechnologies | INSTOCK | 9,000 | |||
| P1206H8661FB | Vishay Intertechnologies | INSTOCK RoHS : Not Compliant | 6,500 | |||
| V56MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,927 | |||
| V68MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,000 | |||
| NPO1206HTTD152F | INSTOCK | 3,748 | ||||
| P1206H8661FB | INSTOCK | 3,500 | ||||
| V14MLA1206H | Littelfuse Inc | INSTOCK RoHS : Compliant | 2,000 | |||
| V68MLA1206H | INSTOCK | 2,000 | ||||
| FCP1206H103JH2 | INSTOCK | 1,396 | ||||
| 30D206H050DC3AD3357 | Barker Microfarads (BMI) | INSTOCK | 625 | |||
| SAA7206H | INSTOCK | 528 | ||||
| SF-1206HI075M-2 | Bourns Inc | INSTOCK RoHS : Compliant | 211 | |||
| V26MLA1206H | INSTOCK | 100 | ||||
| FCP1206H332J-H1 | INSTOCK | 90 | ||||
![]() Avnet Abacus | SF-1206HIA200M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206HIA200M-2) RoHS : Compliant | 3,000 | ||
| F1206HI0500V065TM | AEM Inc | SMD Fuse High Inrush Current Withstand 500 mA 65 VDC 1206 3216 Metric SolidMatrix HI - Tape and Reel (Alt: F1206HI0500V065TM) RoHS : Compliant | 3,000 | |||
| F1206HI6000V024TM | AEM Inc | SMD Fuse High Inrush Current Withstand 6 A 24 VDC 1206 3216 Metric SolidMatrix HI (Alt: F1206HI6000V024TM) RoHS : Compliant | 3,000 | |||
| P-1206H6102BGTS | Vishay Intertechnologies | (Alt: P-1206H6102BGTS) RoHS : Compliant | 2,520 | |||
| F1206HC12A0TM | AEM Inc | SMD Fuse High Inrush Current Withstand 12 A 35 VDC 1206 3216 Metric SolidMatrix HC - Tape and Reel (Alt: F1206HC12A0TM) RoHS : Compliant | 0 | |||
| P1206H1022BBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H1022BBT) RoHS : Not Compliant | 0 | |||
| P1206H1541FBT | Vishay Intertechnologies | - Tape and Reel (Alt: P1206H1541FBT) RoHS : Not Compliant | 0 | |||
| SF-1206HV40M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206HV40M-2) RoHS : Compliant | 0 | |||
| SF-1206HI250M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206HI250M-2) RoHS : Compliant | 0 | |||
| P-1206H3001BGTS | Vishay Intertechnologies | (Alt: P-1206H3001BGTS) RoHS : Compliant | 0 | |||
| PTN1206H2101FBT1 | Vishay Intertechnologies | SMD Chip Resistor 21 kohm 1 400 mW 1206 3216 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN1206H2101FBT1) RoHS : Not Compliant | 0 | |||
| F1206HI8000V024TM | AEM Inc | SMD Fuse High Inrush Current Withstand 8 A 24 VDC 1206 3216 Metric SolidMatrix HI (Alt: F1206HI8000V024TM) RoHS : Compliant | 0 | |||
| MCA1206HC1004FP100 | Vishay Intertechnologies | SMD Chip Resistor 1 Megaohms 1 250 mW 1206 3216 Metric Thin Film Established Reliability - Tape and Reel (Alt: MCA1206HC1004FP100) RoHS : Compliant | 0 | |||
| MCA1206HC3011FP100 | Vishay Intertechnologies | SMD Chip Resistor 301 kOhm 1 250 mW 1206 3216 Metric Thin Film Established Reliability - Tape and Reel (Alt: MCA1206HC3011FP100) RoHS : Compliant | 0 | |||
| MCA1206HC7509FP100 | Vishay Intertechnologies | MCA 120650 1 VG01 P1 75R - Tape and Reel (Alt: MCA1206HC7509FP100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | F1206HI2500V032TM | AEM Inc | (Alt: F1206HI2500V032TM) RoHS : Compliant | 15,000 | ||
| F1206HI3500V032TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 3.5 A, 32 VDC, 1206 [3216 Metric], SolidMatrix HI (Alt: F1206HI3500V032TM) RoHS : Compliant |
| 15,000 | ||
| F1206HD30A0TM-NV3 | AEM Inc | (Alt: F1206HD30A0TM-NV3) RoHS : Compliant |
| 15,000 | ||
| F1206HC25A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 25 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC25A0TM) RoHS : Compliant | 12,000 | |||
| F1206HA12V024T | AEM Inc | (Alt: F1206HA12V024T) RoHS : Compliant |
| 3,000 | ||
| F1206HA15V024TM | AEM Inc | (Alt: F1206HA15V024TM) RoHS : Compliant |
| 3,000 | ||
| F1206HI2000V063TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 2 A, 63 VDC, 1206 [3216 Metric], SolidMatrix HI (Alt: F1206HI2000V063TM) RoHS : Compliant | 3,000 | |||
| F1206HC12A0TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 12 A, 35 VDC, 1206 [3216 Metric], SolidMatrix HC (Alt: F1206HC12A0TM) RoHS : Compliant | 0 | |||
| F1206HI8000V024TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 8 A, 24 VDC, 1206 [3216 Metric], SolidMatrix HI (Alt: F1206HI8000V024TM) RoHS : Compliant | 0 | |||
| F1206HI1500V063TM | AEM Inc | SMD Fuse, High Inrush Current Withstand, 1.5 A, 63 VDC, 1206 [3216 Metric], SolidMatrix HI (Alt: F1206HI1500V063TM) RoHS : Compliant | 0 | |||
| F1206HB30V024TM | AEM Inc | Fuse, Surface Mount, 30 A, High Current, 24 V, 1206 [3216 Metric], SolidMatrix HB Series (Alt: F1206HB30V024TM) RoHS : Compliant |
| 0 | ||
| F1206HB10V024TM | AEM Inc | (Alt: F1206HB10V024TM) RoHS : Compliant | 0 | |||
| F1206HI1000V063TM | AEM Inc | Fuse, Surface Mount, 1 A, High Inrush Current Withstand, 63 V, 1206 [3216 Metric] (Alt: F1206HI1000V063TM) RoHS : Compliant | 0 | |||
| 68015-206HLF | Amphenol Corporation | Conn Unshrouded Header HDR 6 POS 2.54mm Solder RA Thru-Hole Bag (Alt: 68015-206HLF) RoHS : Compliant | 0 | |||
| F1206HA10V024TM | AEM Inc | (Alt: F1206HA10V024TM) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MPP4201-206-HS | Microchip Technology Inc | MSWMPP4201206HS (Alt: MPP4201-206-HS) RoHS : Compliant | 0 | ||
| MPP4203-206-HS | Microchip Technology Inc | Diode PIN Switch 50V 2Pin Style 206 (Alt: MPP4203-206-HS) RoHS : Compliant | 0 | |||
| MPV2100-206-HS | Microchip Technology Inc | Diode VAR Cap Single 22V 09pF 2Pin Style 206 (Alt: MPV2100-206-HS) RoHS : Not Compliant | 0 | |||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMCV-1206H-850-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AMCV-1206H-480-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-560-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-101-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-180-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-300-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-600-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMCV-1206H-380-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | LI1206H151R-10 | Steward, Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 18,698 | |
| 68000-206HLF | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Compliant |
| 7,473 | ||
| LI1206H900R-00 | Steward, Inc | IN STOCK SHIP TODAY |
| 2,350 | ||
| V14MLA1206H | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,258 | ||
| PTN1206H1211BBT | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,536 | |||
| V14MLA1206H | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Unknown |
| 1,500 | ||
| CC1206HNP0221J-T/R | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| CC1206HNP0471J-T/R | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| CC1206HNP0300J | TDK Corporation | IN STOCK SHIP TODAY |
| 1,000 | ||
| LCB1206H-101 | ISI | IN STOCK SHIP TODAY | 698 | |||
| CC1206HX7R224KT0K0N | TDK Corporation | IN STOCK SHIP TODAY |
| 555 | ||
| CC1206HX7R224KTR | TDK Corporation | IN STOCK SHIP TODAY RoHS : Unknown |
| 555 | ||
| P1206H4871BBW | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant | 100 | |||
![]() EBV Elektronik | MMDP-67206HV-15-E | Microchip Technology Inc | FIFO Mem Async Dual DepthWidth BiDir 16K X 9 28Pin FPAK (Alt: MMDP-67206HV-15-E) RoHS : Not Compliant | 0 | ||
PIC24EP512GP206-H/PT![]() | Microchip Technology Inc | TQFP 16 Bit MCU 512KB Flash 48KB RAM 60 MHz 64 Pin OpAmps Comparators PTG (Alt: PIC24EP512GP206-H/PT) RoHS : Compliant | 0 | |||
![]() FDH Electronics | 370FS001N2206H3 | Glenair Inc | Connector Acc |
| 6 | |
| 290WS004G-1206H3 | Glenair Inc | Backshells & Ac RoHS : Compliant | 5 | |||
| 290WA003G-1206H | Glenair Inc | Connector |
| 0 | ||
| 360AS001M1206H4 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 360DA002B1206H | Glenair Inc | Connector |
| 0 | ||
| M85049/142-06HC | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 370AS001B2206H3 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 370DA002N1206H | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 370DS002NF1206H3 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 370FS001NF1206H3 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 370FS001ZR1206H3 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380AB001B1206H | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 380AB115B1206H | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 380AS001M1206H3 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 380AS001NF2206H6 | Glenair Inc | Connector |
| 0 | ||
![]() Maritex | CA3206H1300 | Cvilux Corporation | Low profile PCB connector; pitch 1.27mm; 6-contacts; THT; female; side entry RoHS : Compliant |
| 1,196 | |
| FUT0430WQ206H-ZC-A0 | HU-NAN | Display TFT; LCD 4.3"; 480xRGBx272 pixels; resistive touch panel RTP; IPS; white LED backlight; 250 cd/m2; 40 pins |
| 49 | ||
![]() Master Electronics | TW-12-06-H-D-250-SM-A-M | Samtec Inc | RoHS : Compliant |
| 0 | |
| TW-12-06-H-D-375-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-32-06-H-D-605-SM | Samtec Inc | 2Mm Terminal Strips |Samtec TW-32-06-H-D-605-SM RoHS : Compliant |
| 0 | ||
| TMM-112-06-H-D-SM-A | Samtec Inc | LOW PROFILE TIGER EYE HE RoHS : Compliant |
| 0 | ||
| TMM-132-06-H-D-SM-A | Samtec Inc | LOW PROFILE TIGER EYE HE RoHS : Compliant |
| 0 | ||
| SF-1206HH1200R-2 | Bourns Inc | Fuse Chip 12A 50V SMD Solder Pad 1206 3.2 X 1.65 X 1mm RoHS : Compliant |
| 0 | ||
| SF-1206HI250M-2 | Bourns Inc | 1206 SMD High-Inrush Multilayer 2.5A RoHS : Compliant |
| 0 | ||
| CW1K-2CE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| CW4K-31DE20-6H | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HTSW-122-06-H-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-132-06-H-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-142-06-H-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-190-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-370-SM-A-P-TR | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-H-D-440-SM-A | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | SF-1206HV40M-2 | Bourns Inc | Surface Mount Fuses 40A Single blow fuse 1206 SinglFuse RoHS : Compliant |
| 50 | |
| FN9222R-12-06HI | Schaffner | AC Power Entry Modules 12A RoHS : Compliant |
| 50 | ||
![]() Pasternack Enterprises US | PE3W10206/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm N Male to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our type N to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-12 can also be known as a type N plug to type F plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3W10206/HS-12 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-12 can also be used in the other direction and will be type F male to type N male cable assembly if the opposite connectivity is required. N type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to F type cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 12 inch length using 75 Ohm RG187 coax with heatshrink. |
| 145 | |
| PE3W10206/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm N Male to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and F type cable connection on the other. Our type N to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-36 can also be known as a N type plug to F type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type F plug cable assembly PE3W10206/HS-36 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-36 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 36 inch length using 75 Ohm RG187 coax with heatshrink. |
| 63 | ||
| PE3W10206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm N Male to 75 Ohm F Male Cable 48 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to F type cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-48 can also be known as a N type plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type N plug to F type plug cable assembly PE3W10206/HS-48 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-48 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to F type cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 48 inch length using 75 Ohm RG187 coax with heatshrink. |
| 47 | ||
| PE3W10206/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: F, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length, Max: 60 inches. 75 Ohm N Male to 75 Ohm F Male Cable 60 Inch Length Using 75 Ohm RG187 Coax with HeatShrink., Radio frequency assembly 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type F cable connection on the other. Our N type to type F cable assemblies have a male gender on end 1 and male on end 2. PE3W10206/HS-60 can also be known as a type N plug to F type plug cable assembly and will be shipped same-day as it is purchased. N type plug to type F plug cable assembly PE3W10206/HS-60 is built with RG187 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this type N male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10206/HS-60 can also be used in the other direction and will be type F male to N type male cable assembly if the opposite connectivity is required. Type N plug to F type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type F cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm N male to 75 Ohm F male cable 60 inch length using 75 Ohm RG187 coax with heatshrink. |
| 38 | ||
| PE3W22206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. 1.0/2.3 Male Right Angle to 10KV Male Cable Using RG58 Coax with HeatShrink. PE3W22206/HS is a 1.0/2.3 male right angle to 10KV male cable using RG58 coax. This Pasternack 1.0/2.3 male right angle to 10KV male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10KV for connector 2. 1.0/2.3 right angle to 10KV coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.0/2.3 right angle to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W22206/HS 1.0/2.3 male right angle to 10KV male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W03206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using RG58 Coax with HeatShrink. PE3W03206/HS is a N female bulkhead to SMA male cable using RG58 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03206/HS N female bulkhead to SMA male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C0206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Female Cable Using RG400 Coax with HeatShrink. PE3C0206/HS is a Mini UHF male to N female cable using RG400 coax. This Pasternack Mini UHF male to N female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm N for connector 2. Our male Mini UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0206/HS Mini UHF male to N female cable assembly is constructed with RG400 coax. | 0 | |||
| PE3W07206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to BNC Female Bulkhead Cable Using LMR-195 Coax with HeatShrink. PE3W07206/HS is a reverse polarity TNC male to BNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity TNC male to BNC female bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our reverse polarity male TNC to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07206/HS TNC reverse polarity male to BNC female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W05206/HS | Pasternack Enterprises | 0 | ||||
| PE3W15206/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to MCX Jack Cable Using RG316 Coax with HeatShrink. PE3W15206/HS is a FAKRA jack to MCX jack cable using RG316 coax. This Pasternack FAKRA jack to MCX jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm MCX for connector 2. Our jack FAKRA to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15206/HS FAKRA jack to MCX jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W01206/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MCX Jack to SMA Male Low Loss Cable 36 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 36 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-36 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-36 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-36 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MCX Jack to SMA Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-48 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-48 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01206/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Jack to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W01206/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-24 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-24 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Sager | TW-32-06-H-D-270-SM-A | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | ||
| TW-32-06-H-D-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TMM-112-06-H-D-SM-A | Samtec Inc | Headers & Wire Housings Low Profile Tiger Eye Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TMM-132-06-H-D-SM-A | Samtec Inc | Headers & Wire Housings Low Profile Tiger Eye Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| CW1K-2CE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 2position RoHS : Compliant |
| 0 | ||
| CW4K-31DE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 3position |
| 0 | ||
| SSW-122-06-H-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TW-22-06-H-S-605-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FN9244R-12-06HI | TE Connectivity | AC Power Entry Modules 12A BLD RESISTOR HOT INLT VRSN RoHS : Compliant |
| 0 | ||
| FN9233-12-06HI | TE Connectivity | AC Power Entry Modules 12A 250VAC Hot Inlet mounting flanges RoHS : Compliant |
| 0 | ||
| FN9244EU-12-06HI | TE Connectivity | AC Power Entry Modules 12A IEC INLET FILTER HI-PERFORM W/CHOKE RoHS : Compliant |
| 0 | ||
| CW4K-2AE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 2position RoHS : Compliant |
| 0 | ||
| CW1K-2BE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 2position RoHS : Compliant |
| 0 | ||
| CW4K-2CE20-6H | IDEC Corporation | Keylock Switches KeySelectorSW 22MM 2position RoHS : Compliant |
| 0 | ||
D502J12S206HQA![]() | C&K Switches | Rocker Switches Rocker RoHS : Compliant | 0 | |||
![]() Vyrian | P1206H4221BBW | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 13,943 | ||
| AMCV-1206H-180-T | Abracon Corporation | Varistor, 0.7J, Surface Mount RoHS : Compliant | 11,519 | |||
| P1206H1332DBT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 13300ohm, 200V, 0.5% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 8,936 | |||
| P1206H1005BGT | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 10000000ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 8,611 | |||
| AMCV-1206H-560-T | Abracon Corporation | Varistor, 1J, Surface Mount RoHS : Compliant | 8,381 | |||
ADXL206HDZ![]() | Analog Devices Inc | Analog Circuit, 1 Func, CDIP8 RoHS : Compliant | 8,262 | |||
| PT78NR206H | Texas Instruments | Switching Regulator, Voltage-mode, 700kHz Switching Freq-Max, Hybrid RoHS : Compliant | 3,928 | |||
| P1206H4321BBTA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 | 788 | |||
| P-1206H4221BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 786 | |||
| DSPIC33EP256MC206-H/PT | Microchip Technology Inc | 16-Bit Size, 0-Ext Bit, 60MHz, CMOS, PQFP64 RoHS : Compliant | 771 | |||
| P-1206H4321BBTS | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.4W, 4320ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 729 | |||
| P1206H4221BBT100 | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.33W, 4220ohm, 200V, 0.1% +/-Tol, 50ppm/Cel, Surface Mount, 1206 RoHS : Not Compliant | 701 | |||
| C1206H104J3GACT1K0 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206 | 465 | |||
| AMCV-1206H-850-T | Abracon Corporation | Varistor, 85V, 1.2J, Surface Mount RoHS : Compliant | 455 | |||
| C1206H104J3GACT100 | KEMET Corporation | Ceramic Capacitor, Multilayer, Ceramic, 25V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.1uF, Surface Mount, 1206 | 373 | |||
![]() Win Source Electronics | V26MLA1206H | Littelfuse Inc | VARISTOR 34V 150A 1206 / Varistor Products Surface Mount Multilayer Varistors (MLVs) > MLA Series RoHS : Compliant |
| 3,438 | |
| V5.5MLA1206H | Littelfuse Inc | VARISTOR 8.2V 150A 1206 RoHS : Compliant |
| 1,410 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |