công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  



203-8L-RX nhà phân phối

nhà phân phốitên linh kiệnnhà sản xuấtGiải thích chi tiết về linh kiệnPriceQty.
BuyNow

Pasternack Enterprises US
PE7520-3

Pasternack Enterprises Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 3 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-3 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7520-3 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 3 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.
1 : $68.49
25 : $65.75
50 : $63.7
100 : $62.33
30
PE71S2037

Pasternack Enterprises Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 5 MHz, Maximum Frequency: 3 GHz, Impedance: 50 Ohm, Maximum Input Power: 1 Watts, Maximum Input VSWR: 1.5:1, Maximum Insertion Loss: 3.5 dB. Absorptive SP4T PIN Diode Switch Operating from 5 MHz to 3 GHz Up to 1 Watt (+30 dBm) and SMA. PE71S2037 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 5 MHz and a maximum frequency of 3 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of 10,000 ns and a maximum input power of 1 Watt (+30 dBm ). Insertion loss maximum of this SMA Absorptive switch is 3.5 dB with an isolation minimum of dB. Absorptive PIN diode radio frequency switch PE71S2037 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.
1 : $1,740.0
5 : $1,670.4
10 : $1,600.8
19
PE71S2038

Pasternack Enterprises Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 100 MHz, Maximum Frequency: 500 MHz, Impedance: 50 Ohm, Maximum Input Power: 250 Watts, Maximum Input VSWR: 1.25:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 55 dB. SPDT PIN Diode Switch Operating from 100 MHz to 500 MHz Up to 250 Watts (+54 dBm) and SMA. PE71S2038 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 100 MHz and a maximum frequency of 500 MHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 40,000 ns and a maximum input power of 250 Watts (+54 dBm ). Insertion loss maximum of this SMA Reflective switch is 0.5 dB with an isolation minimum of 55 dB. Reflective PIN diode radio frequency switch PE71S2038 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.
1 : $3,410.0
5 : $3,273.6
10 : $3,137.2
1
PE3W20347

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Cable Using RG316 Coax. PE3W20347 is a N female bulkhead to N female cable using RG316 coax. This Pasternack N female bulkhead to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20347 N female bulkhead to N female cable assembly is constructed with RG316 coax.
0
PE3W20392

Pasternack Enterprises Key Specifications, Connector Series 1: BMMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Snap in, Connector Impedance 1: 50 Ohm, Connector Series 2: BMMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Snap in, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. BMMA Female Snap in to BMMA Female Snap in Cable Using PE-SR405AL Coax. PE3W20392 is a BMMA female snap in to BMMA female snap in cable using PE-SR405AL coax. This Pasternack BMMA female snap in to BMMA female snap in cable assembly uses a 50 Ohm BMMA for connector 1 and a 50 Ohm BMMA for connector 2. Our female BMMA snap in to female BMMA snap in cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20392 BMMA female snap in to BMMA female snap in cable assembly is constructed with PE-SR405AL coax.
0
PE3W22039/HS

Pasternack Enterprises Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. 4.3-10 Male Right Angle to QMA Male Right Angle Cable Using SPP-250-LLPL Coax with HeatShrink. PE3W22039/HS is a 4.3-10 male right angle to QMA male right angle cable using SPP-250-LLPL coax. This Pasternack 4.3-10 male right angle to QMA male right angle cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm QMA for connector 2. 4.3-10 right angle to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 4.3-10 right angle to male QMA right angle cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W22039/HS 4.3-10 male right angle to QMA male right angle cable assembly is constructed with SPP-250-LLPL coax.
0
PE3W06203/HS

Pasternack Enterprises Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Cable Using LMR-240 Coax with HeatShrink. PE3W06203/HS is a TNC male to TNC female cable using LMR-240 coax. This Pasternack TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06203/HS TNC male to TNC female cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3W12039

Pasternack Enterprises Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. SMA Male to Push-On SMP Female Cable Using RG405 Coax. PE3W12039 is a SMA male to SMP female cable using RG405 coax. This Pasternack SMA male to SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. Our male SMA to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W12039 SMA male to SMP female cable assembly is constructed with RG405 coax.
0
PE3W20346

Pasternack Enterprises Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using TCOM-240-FR Coax. PE3W20346 is a N male to N male cable using TCOM-240-FR coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20346 N male to N male cable assembly is constructed with TCOM-240-FR coax.
0
PE3W20384LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. C Male Right Angle to HN Male Cable Using RG400 Coax with HeatShrink, LF Solder. PE3W20384LF/HS is a C male right angle to HN male cable using RG400 coax. This Pasternack C male right angle to HN male cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm HN for connector 2. C right angle to HN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20384LF/HS C male right angle to HN male cable assembly is constructed with RG400 coax.
0
PE3W20391

Pasternack Enterprises Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SSMC Plug Right Angle Cable Using LMR-100A-UF Coax. PE3W20391 is a MMCX plug right angle to SSMC plug right angle cable using LMR-100A-UF coax. This Pasternack MMCX plug right angle to SSMC plug right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SSMC for connector 2. MMCX right angle to SSMC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug SSMC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20391 MMCX plug right angle to SSMC plug right angle cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.
0
PE3C2034LF/HS

Pasternack Enterprises Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. BNC Male to BNC Male Cable Using RG188 Coax with HeatShrink, LF Solder, RoHS. PE3C2034LF/HS is a BNC male to BNC male cable using RG188 coax. This Pasternack BNC male to BNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2034LF/HS BNC male to BNC male cable assembly is constructed with RG188 coax.
0
PE3C7820-36

Pasternack Enterprises Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.1/9.5 Mini DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 36 inches. 4.1/9.5 Mini DIN Male to 4.1/9.5 Mini DIN Male Right Angle Low PIM Cable 36 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 36 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 36 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and right angle 4.1/9.5 mini DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable assemblies have a male gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable is a male to male coax assembly, PE3C7820-36, can also be known as a low PIM 4.1/9.5 mini DIN plug to right angle 4.1/9.5 mini DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN plug cable assembly PE3C7820-36 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to right angle 4.1/9.5 mini DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7820-36 can also be used in the other direction and will be right angle 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.1/9.5 mini DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.1/9.5 mini DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.1/9.5 mini DIN male right angle low PIM cable 36 inch length using 1/4 inch superflexible coax.
1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65
0
PE3W04203/HS-72

Pasternack Enterprises Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. BNC Male Right Angle to SMA Male Low Loss Cable 72 Inch Length Using LMR-200 Coax with HeatShrink., Radio frequency assembly BNC male right angle to SMA male low loss cable 72 inch length using LMR-200 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to SMA male low loss cable 72 inch length using LMR-200 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle BNC cable connection on one end and SMA cable connection on the other. Our low loss right angle BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04203/HS-72 can also be known as a low loss right angle BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3W04203/HS-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04203/HS-72 can also be used in the other direction and will be SMA male to right angle BNC male cable assembly if the opposite connectivity is required. Low loss BNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to SMA male low loss cable 72 inch length using LMR-200 coax with heatshrink.
1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49
0
PE3W13203

Pasternack Enterprises Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Jack to Push-On SMP Female Right Angle Cable Using RG316 Coax. PE3W13203 is a SMB jack to SMP female right angle cable using RG316 coax. This Pasternack SMB jack to SMP female right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMP for connector 2. SMB to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack SMB to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13203 SMB jack to SMP female right angle cable assembly is constructed with RG316 coax.
0

Venkel Ltd.
CR0201-20W-203JT

VENKEL LTD Chip Resistor;0201;1/20W;20K;�5%
RoHS : Compliant
15,000
TFCR0402-16W-C-2033CT-1K

VENKEL LTD Thin Film CR;0402;1/16W;�50PPM;203K ;�0.25%
RoHS : Compliant
0
SWCR0805-BK-203KT

VENKEL LTD Surge Withstanding CR;0805;2/5W;�100PPM;20K;�10%
RoHS : Compliant
0
CR1206-8W-8203DT

VENKEL LTD Chip Resistor;1206;1/8W;820K ;�0.5%
RoHS : Compliant
0
TFCR0603-10W-C-3203BT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�50PPM;320K ;�0.1%
RoHS : Compliant
0
TFCR0603-10W-C-8203BT

VENKEL LTD Thin Film CR;0603;1/10W;�50PPM;820K;�0.1%
RoHS : Compliant
0
TFCR0603-10W-E-1203DT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�25PPM;120K;�0.5%
RoHS : Compliant
0
TFCR0603-10W-K-2033BT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;203K ;�0.1%
RoHS : Compliant
0
TFCR0603-10W-K-2203CT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;220K;�0.25%
RoHS : Compliant
0
TFCR0603-16W-C-2032BT

VENKEL LTD Thin Film CR;0603;1/16W;�50PPM;20.3K;�0.1%
RoHS : Compliant
0
TFCR0603-16W-C-9203DT-1K

VENKEL LTD Thin Film CR;0603;1/16W;�50PPM;920K ;�0.5%
RoHS : Compliant
0
TFCR0603-16W-E-2030BT

VENKEL LTD Thin Film CR;0603;1/16W;�25PPM;203R;�0.1%
RoHS : Compliant
0
TFCR0603-16W-K-6203FT

VENKEL LTD Thin Film CR;0603;1/16W;�100PPM;620K;�1%
RoHS : Compliant
0
TFCR0805-10W-C-2033CT

VENKEL LTD Thin Film CR;0805;1/10W;�50PPM;203K ;�0.25%
RoHS : Compliant
0
TFCR0805-10W-C-2203DT

VENKEL LTD Thin Film CR;0805;1/10W;�50PPM;220K;�0.5%
RoHS : Compliant
0

Win Source Electronics
IRLML5203TRPBF

Infineon Technologies AG MOSFET P-CH 30V 3A SOT-23
RoHS : Compliant
1,825 : $0.1646
1,465 : $0.1712
1,125 : $0.1779
785 : $0.1913
510 : $0.198
240 : $0.2114
990,000
DMC2038LVT-7

Diodes Incorporated MOSFET N/P-CH 20V TSOT26
RoHS : Compliant
1,335 : $0.2254
1,070 : $0.2346
825 : $0.2437
575 : $0.262
370 : $0.2712
175 : $0.2895
902,619
ESD203B102ELE6327XTMA1

Infineon Technologies AG TVS DIODE 13.2VWM 23VC TSLP-2-20
RoHS : Compliant
1,455 : $0.2068
1,085 : $0.2307
840 : $0.2387
610 : $0.2466
395 : $0.2546
165 : $0.3102
279,040
DMP2035UVT-7

Diodes Incorporated MOSFET P-CH 20V 6A TSOT26
RoHS : Compliant
2,660 : $0.1128
1,990 : $0.1258
1,540 : $0.1301
1,120 : $0.1345
725 : $0.1388
300 : $0.1691
105,000
MAX40203AUK+T

Maxim Integrated Products Ultra-Tiny Nanopower Ideal Diode with Ultra-Low-Voltage Drop 1A 5-Pin SOT-23 T/R
RoHS : Compliant
920 : $0.3268
690 : $0.3645
535 : $0.3771
385 : $0.3897
250 : $0.4022
105 : $0.4902
49,590
VCAN26A2-03GHE3-08

Vishay Huntington TVS DIODE 26.5VWM 50VC SOT323
4,210 : $0.0713
3,145 : $0.0795
2,435 : $0.0823
1,765 : $0.085
1,145 : $0.0877
470 : $0.1069
46,000
TPS3820-33QPDBVRQ1

Texas Instruments IC SUPERVISOR 1 CHANNEL SOT23-5
RoHS : Compliant
295 : $1.025
235 : $1.0667
185 : $1.1084
130 : $1.1917
85 : $1.2334
40 : $1.3167
36,271
TPS62203DBVRG4

Texas Instruments IC REG BUCK 3.3V 0.3A SYNC SOT23
RoHS : Compliant
400 : $0.8449
300 : $0.9424
230 : $0.9748
170 : $1.0073
110 : $1.0399
45 : $1.2673
30,000
BR-2032/BN

Panasonic Electronic Components BATTERY LITHIUM 3V COIN 20MM / Coin, 20.0mm Lithium Poly-Carbon Monofluoride 3 V Battery Non-Rechargeable (Primary)
355 : $0.8535
265 : $0.952
205 : $0.9848
150 : $1.0176
100 : $1.0504
40 : $1.2802
30,000
0022035045

Molex CONN HEADER VERT 4POS 2.5MM
RoHS : Compliant
6,175 : $0.0544
4,615 : $0.0607
3,575 : $0.0627
2,595 : $0.0648
1,675 : $0.067
690 : $0.0815
24,000
22-27-2031

Molex Headers & Wire Housings 3C STR HEADER W/FRLK
RoHS : Compliant
3,780 : $0.0794
2,825 : $0.0886
2,185 : $0.0917
1,585 : $0.0947
1,025 : $0.0978
420 : $0.1191
22,801
AP63203WU-7

Diodes Incorporated IC REG BUCK 3.3V 2A TSOT26
RoHS : Compliant
134 : $2.2535
107 : $2.3451
83 : $2.4367
58 : $2.6199
37 : $2.7115
18 : $2.8947
19,502
2031-23T-SM-RPLF

Bourns Inc GDT 185V 1KA SURFACE MOUNT / Miniature 2-Pole Gas Discharge Tube
RoHS : Compliant
420 : $0.7146
315 : $0.797
245 : $0.8245
180 : $0.852
115 : $0.8794
50 : $1.0718
18,000
NSIC2030JBT3G

onsemi IC CURRENT REGULATOR 15% SMB
RoHS : Compliant
1,060 : $0.2834
795 : $0.3161
615 : $0.327
445 : $0.3379
290 : $0.3488
120 : $0.425
14,610
CN5020-300BG564-SCP-G

Cavium Networks
1 : $2,977.0994
133

Wuhan P&S
NTCLE203E3473FB0A

Vishay Intertechnologies NTC NI 0.4 LEAD 47K 1% BULK E3 A
RoHS : Compliant
1 : $4.42
100 : $1.48
500 : $1.37
1,000 : $1.33
43,000
VCAN16A2-03GHE3A18

Vishay Intertechnologies ESD PROTECTION DIODE SOT323
RoHS : Compliant
1 : $3.72
100 : $1.24
500 : $1.15
1,000 : $1.12
40,000
PR02000206203JR500

Vishay Intertechnologies Power Metal Film Leaded Resistors
RoHS : Compliant
1 : $0.57
100 : $0.19
500 : $0.18
1,000 : $0.18
10,000

Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ]  

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com