| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
191L-S28-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | PLT0805Z6191LBTP | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0805Z6191LBTP) RoHS : Not Compliant |
| 0 | |
| MA84501191LF | Amphenol Corporation | MEG-ARRAY 300 POS RECP,4MM 30GXT W/CAP PB FREE - Tape and Reel (Alt: MA84501191LF) RoHS : Not Compliant | 0 | |||
| 4304M-104-121/191L | Bourns Inc | Res Thick Film NET 120 Ohm/190 Ohm 2% 3/5W ?100ppm/?C TERM Molded 4-Pin SIP Pin Thru-Hole - Rail/Tube (Alt: 4304M-104-121/191L) RoHS : Not Compliant |
| 0 | ||
| PLT0805Z6191LBTI | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0805Z6191LBTI) RoHS : Not Compliant |
| 0 | ||
| PLT0805Z6191LBWP | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT0805Z6191LBWP) RoHS : Not Compliant |
| 0 | ||
| R1191L150D-TR | Nisshinbo Micro Devices | 16V INPUT MANUAL ECO MODE SHIFT 300MA VOLTAGE REGULATOR - Tape and Reel (Alt: R1191L150D-TR) RoHS : Not Compliant |
| 0 | ||
| ARC6-08-19.1-LU-LU-3-1 | Samtec Inc | B32652A1562J3 - Bulk (Alt: ARC6-08-19.1-LU-LU-3-1) RoHS : Compliant |
| 0 | ||
| PLT0603Z6191LBTS | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0603Z6191LBTS) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z6191LBTS | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT1206Z6191LBTS) RoHS : Not Compliant |
| 0 | ||
| MA10123982-191LF | Amphenol Corporation | MEG-ARRAY 320 POS RECP,4MM 30GXT W/CAP PB FREE - Tape and Reel (Alt: MA10123982-191LF) RoHS : Not Compliant | 0 | |||
| R1191L047B-TR | Nisshinbo Micro Devices | 16V INPUT MANUAL ECO MODE SHIFT 300MA VOLTAGE REGULATOR - Tape and Reel (Alt: R1191L047B-TR) RoHS : Not Compliant |
| 0 | ||
| PLT0603Z6191LBWS | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT0603Z6191LBWS) RoHS : Not Compliant |
| 0 | ||
| PLT0805Z6191LBT0 | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Tape and Reel (Alt: PLT0805Z6191LBT0) RoHS : Not Compliant |
| 0 | ||
| PLT1206Z6191LBWS | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 400 mW, 1206 [3216 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT1206Z6191LBWS) RoHS : Not Compliant |
| 0 | ||
| PLT0805Z6191LSTI | Vishay Intertechnologies | SMD Chip Resistor, 6.19 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0805Z6191LSTI) RoHS : Compliant |
| 0 | ||
![]() Newark | 2191L5-24V | Visual Communications Company | Panel Mount Indicator, Led, 7.87Mm, Gree; |Vcc/visual Communications Company 2191L5-24V RoHS : Compliant |
| 722 | |
| 2191L1-6V | Visual Communications Company | Panel Indicator, 7.87Mm, Red, 6V; Led Color:Red; Operating Voltage:6V; Mounting Hole Dia:7.87Mm; Forward Current If:-; Luminous Intensity:-; Ip/Nema Rating:Not Rated; Product Range:2191L Series Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| HMC8191LC4 | Analog Devices Inc | Rf Mixer, 2 Channel, 26.5Ghz, Lcc-Ep-24; |Analog Devices, Inc. HMC8191LC4 RoHS : Compliant |
| 0 | ||
| 55755-191LF | Amphenol Communications Solutions | Board Stacking Connector, 240 Contact(S); |Amphenol Communications Solutions 55755-191LF RoHS : Not Compliant |
| 0 | ||
| 70238-191LF | Amphenol Communications Solutions | Conn, Hdr, 70238-191Lf; |Amphenol Communications Solutions 70238-191LF RoHS : Compliant |
| 0 | ||
| WL-2191L7-6V | Wamco Inc | Led Panel Mnt Indicator, Chrome Bezel; |Wamco WL-2191L7-6V RoHS : Compliant |
| 0 | ||
| WL-2191L1-6V | Wamco Inc | Led Panel Mnt Indicator, Non Relampable; |Wamco WL-2191L1-6V RoHS : Compliant |
| 0 | ||
| WL-2191L5-12V | Wamco Inc | Panel Mount Indicator, Led, 7.87Mm, Gree; |Wamco WL-2191L5-12V RoHS : Compliant |
| 0 | ||
| WL-2191L1-24V | Wamco Inc | Panel Mount Indicator, Led, 7.87Mm, Red,; |Wamco WL-2191L1-24V RoHS : Compliant |
| 0 | ||
| WL-2191L1-12V | Wamco Inc | Led Panel Mnt Indicator Chrome Bezel Red; |Wamco WL-2191L1-12V RoHS : Compliant |
| 0 | ||
| P0603Y6191LBW | Vishay Intertechnologies | P 0603 Y 6191 L B Wp /Waffle Pack Or Tap; |Vishay P0603Y6191LBW RoHS : Not Compliant |
| 0 | ||
| P0805Y6191LBW | Vishay Intertechnologies | P 0805 Y 6191 L B Wp /Waffle Pack Or Tap; |Vishay P0805Y6191LBW RoHS : Not Compliant |
| 0 | ||
| WL-2191L5-24V | Wamco Inc | Panel Mount Indicator, Led, 7.87Mm, Gree; |Wamco WL-2191L5-24V RoHS : Compliant |
| 0 | ||
| EV1HMC8191LC4 | Analog Devices Inc | Evaluation Board, Rf Mixer; |Analog Devices, Inc. EV1HMC8191LC4 RoHS : Not Compliant |
| 0 | ||
| 4304M-104-121/191L | Bourns Inc | Resistors Network - Thick Film Mold Sip; |Bourns, Inc. 4304M-104-121/191L RoHS : Compliant |
| 0 | ||
![]() Analog Devices Inc | HMC8191LC4TR | Analog Devices Inc | 6 GHz to 26.5 GHz, Wideband I/ RoHS : Compliant |
| 110 | |
| HMC8191LC4TR-R5 | Analog Devices Inc | 6 GHz to 26.5 GHz, Wideband I/ RoHS : Compliant |
| 107 | ||
| HMC8191LC4 | Analog Devices Inc | 6 GHz to 26.5 GHz, Wideband I/ RoHS : Compliant |
| 96 | ||
| EV1HMC8191LC4 | Analog Devices Inc | EVALUATION PCB ASSEMBLY |
| 71 | ||
![]() RS | WL-2191L5-24V | Wamco Inc | INDICATOR PNL-MNT LED GREEN 0.31IN. 24V-28V LENS HIGH HAT 22AWG WIRE LEA RoHS : Compliant |
| 647 | |
| 2191L1-24V | Visual Communications Company | PANEL MOUNT INDICATOR RED LED 0.315" 24 VDC LEAD WIRES 2191L SERIES RoHS : Compliant |
| 589 | ||
| 2191L5-24V | Visual Communications Company | PANEL MOUNT INDICATOR GREEN LED 0.315" 24 VDC WIRES FIXED 2191L SERIES RoHS : Compliant |
| 167 | ||
| 2191L7-24V | Visual Communications Company | INDICATOR PANEL MOUNT LED MNT-SZ 0.31" PUSH-ON SPEEDNUT YELLOW 24V LEADS RoHS : Compliant |
| 131 | ||
| WL-2191L1-24V | Wamco Inc | INDICATOR PNL-MNT LED RED 0.31 IN. 24V LENS HIGH HAT 22AWG WIRE LEADS RoHS : Compliant |
| 131 | ||
| 2191L1-6V | Visual Communications Company | PANEL MOUNT INDICATOR LED 6V RED RoHS : Compliant |
| 74 | ||
| 2191L5-6V | Visual Communications Company | PANEL MOUNT INDICATOR SOLID STATE FIXED LED 6V 0.31 MOUNT GREEN 2191L SERIES RoHS : Compliant |
| 48 | ||
| 2191L5-12V | Visual Communications Company | INDICATOR PANEL MOUNT LED MNT-SZ 0.31" PUSH-ON SPEEDNUT GREEN 12V LEADS RoHS : Compliant |
| 31 | ||
| 191L050G | B&B Electronics Manufacturing Company | TIMING BELT, 0.500" BELT WIDTH, 51 TEETH, 19.125" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 191L100G | B&B Electronics Manufacturing Company | TIMING BELT, 1.000" BELT WIDTH, 51 TEETH, 19.125" PITCH LENGTH, SINGLE SIDED |
| 0 | ||
| 2191L7-6V | Visual Communications Company | PANEL MOUNT INDICATOR RND .31" LED 6V WIRE YLW RoHS : Compliant |
| 0 | ||
| WL-2191L7-6V | Wamco Inc | LED IND .31INCH YELLOW 6V CYL 6INCH LDS RoHS : Compliant |
| 0 | ||
| 4304M-104-121/191L | Bourns Inc | RNET - THK FILM MOLD SIP |
| 0 | ||
| LT-1555-115-012 (GLT-00101191 | LT-1555-115-012 | LT1555115012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
| LT-1514-651-012 (GLT-00014191 | LT-1514-651-012 | LT1514651012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
![]() Bisco Industries | 2191L1-12V | Visual Communications Company | RoHS : Compliant | 100 | ||
| 2191L5-12V | Visual Communications Company | RoHS : Compliant | 100 | |||
| 2191L1-24V | Visual Communications Company | RoHS : Compliant | 100 | |||
| 2191L5-24V | Visual Communications Company | RoHS : Compliant | 100 | |||
![]() Rochester Electronics | R1191L030D-TR | Nisshinbo Micro Devices | 16V Input Manual ECO Mode Shift 300mA Voltage Regulator with Reverse Current Protection RoHS : Compliant |
| 10,000 | |
| R1191L046B-TR | Nisshinbo Micro Devices | Fixed Positive LDO Regulator, 4.6V, 1.8V Dropout, PDSO6 RoHS : Compliant |
| 20,000 | ||
R1191L045B-TR![]() | Ricoh Electronic Devices Co Ltd | Fixed Positive LDO Regulator, 4.5V, 1.8V Dropout, PDSO6 RoHS : Compliant |
| 15,000 | ||
![]() Sager | ARC6-08-19.1-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | |
| DCC.91.019.1LA | LEMO connectors | Circular Push Pull Connectors | 0 | |||
| ARC6-08-19.1-LU-LD-2-1 | Samtec Inc | ACCELERATE� SLIM CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| ARC6-16-19.1-LU-LU-3-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
| ARC6-08-19.1-LU-LD-2-3 | Samtec Inc | ACCELERATE� SLIM CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| ARC6-16-19.1-LU-LD-2-1 | Samtec Inc | Specialized Cables AcceleRate Slim Cable Assembly, 0.635 mm Pitch RoHS : Compliant |
| 0 | ||
![]() TME | SON-N191LF-5116 | TT Electronics plc | Resistor: thin film |
| 251 | |
| 55755-191LF | Amphenol Corporation | Connector: PCB to PCB; socket; PIN: 240; straight; 450mA; 200V; 6mm |
| 200 | ||
| 1206W4F191LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 191mΩ; SMD; 1206; 250mW; ±1%; 200V; -55÷125°C |
| 0 | ||
| ARC6-08-19.1-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 485.14mm; PVC; blue; gold-plated; 34AWG; 100Ω; 19.1" RoHS : Compliant |
| 0 | ||
| ARC6-08-19.1-LU-LD-2-3 | Samtec Inc | Cable; PIN: 26; 485.14mm; PVC; blue; gold-plated; 34AWG; 92Ω; 19.1" RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | YLS191LW2106CGE | AVAILABLE EU | 16,951 | |||
![]() Interstate Connecting Components | 70238-191LF | Amphenol FCi | 70238-191LF-METRAL PWR HDR 1MX RoHS : Compliant | 0 | ||
| 8380E0C191LM0A | SOURIAU-SUNBANK | J2300 | 0 | |||
![]() PEI Genesis | DCC.91.019.1LA | LEMO connectors |
| 0 | ||
| 119-1LW24 | HellermannTyton |
| 0 | |||
| 119-1L | HellermannTyton |
| 0 | |||
![]() Powell Electronics | 55755-191LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 132 | |
![]() Richardson RFPD | E7191LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | ||
| E4191LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| EV1HMC8191LC4 | Analog Devices Inc | HMC8191 Up-Down Converter and Mixer Evaluation Boa |
| 0 | ||
| HMC8191LC4 | Analog Devices Inc | Up/Down Conv Mixer 26.5GHz 24-Pin CLLCC EP Cut Tap RoHS : Compliant |
| 0 | ||
| HMC8191LC4TR-R5 | Analog Devices Inc | Up/Down Conv Mixer 26.5GHz 24-Pin CLLCC EP T/R RoHS : Compliant |
| 0 | ||
| HMC8191LC4TR | Analog Devices Inc | Up/Down Conv Mixer 26.5GHz 24-Pin CLLCC T/R RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | MMA-0204-50BL191L 1% | Vishay BCcomponents | INSTOCK | 10,900 | ||
| 2191L5-24V | INSTOCK | 50 | ||||
![]() Avnet Abacus | QJ51191-LFB4-7F | Foxconn Interconnect Technology Limited | (Alt: QJ51191-LFB4-7F) RoHS : Compliant | 0 | ||
![]() Avnet Asia | MA84535191LF | Amphenol Corporation | (Alt: MA84535191LF) RoHS : Compliant | 0 | ||
| 84535-191LF | Amphenol Corporation | Connector BGA Receptacle 200 Position Solder Straight Surface Mount T/R (Alt: 84535-191LF) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | R1191L033B-TR | Nisshinbo Micro Devices | LDO Regulator (Alt: R1191L033B-TR) RoHS : Compliant | 0 | ||
![]() FDH Electronics | 2191L7-24V | Visual Communications Company | Other Products RoHS : Compliant |
| 53 | |
![]() Master Electronics | B2191L1-24V | Linrose Electronics | LED light indicator - Red - 24 VAC/VDC - 5/16 Hole RoHS : Compliant |
| 42 | |
| B2191L5-12V | Linrose Electronics | RoHS : Compliant |
| 24 | ||
| B2191L5-24V | Linrose Electronics | LED Indicator Light - Green - 24 V. RoHS : Compliant |
| 13 | ||
| 2191L1-12V | Visual Communications Company | Indicator Light 12V LED Lamp Red Polycarbonate Square Lens Polished Stainless Steel RoHS : Compliant |
| 3 | ||
| B2191L1-6V | Linrose Electronics | RoHS : Compliant |
| 2 | ||
| 4304M-104-121/191L | Bourns Inc | Res Thick Film NET 120 Ohm/190 Ohm 2% 0.6W ±100ppm/°C TERM Molded 4-Pin SIP Pin Thru-Hole RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-11.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-02-28C-GF-01.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-08-19.1-LU-LU-3-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SST-02-28-GF-01.91-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-05-26-L-19.1-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-03-28-GF-01.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SS-06-28-GF-01.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SDT-05-28-GF-01.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
| S1SD-10-28-GF-01.91-L | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | WL-2191L1-24V | Wamco Inc | Indicator Pnl-Mnt LED Red 0.31 in. 24V Lens High Hat 22AWG Wire Leads RoHS : Compliant |
| 50 | |
| WL-2191L7-24V | Wamco Inc | Wamco Inc. WL-2191L7-24V LED IND .31INCH Yellow 28V CYL 6INCH LDS RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE33191LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable Using RG405 Coax, RoHS. PE33191LF is a SMA female 2 hole flange to SMA female 2 hole flange cable using RG405 coax. This Pasternack SMA female 2 hole flange to SMA female 2 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA 2 hole flange to female SMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE33191LF SMA female 2 hole flange to SMA female 2 hole flange cable assembly is constructed with RG405 coax and the maximum VSWR is 1.4:1. | 68 | ||
| PE34191LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50. SMA Male to SMA Male Cable Using PE-020SR Coax, RoHS. PE34191LF is a SMA male to SMA male cable using PE-020SR coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE34191LF SMA male to SMA male cable assembly is constructed with PE-020SR coax. | 28 | |||
| PE33191LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 6 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33191LF-6, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33191LF-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 6 inch length using RG405 coax, RoHS. |
| 17 | ||
| PE34191LF-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using PE-020SR Coax, RoHS., Radio frequency assembly SMA male to SMA male cable 6 inch length using PE-020SR coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 6 inch length using PE-020SR coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34191LF-6, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34191LF-6 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 6 inch length using PE-020SR coax, RoHS. |
| 12 | ||
| PE33191LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 18 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33191LF-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33191LF-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 18 inch length using RG405 coax, RoHS. |
| 12 | ||
| PE33191LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Female 2 Hole Flange to SMA Female 2 Hole Flange Cable 48 Inch Length Using RG405 Coax, RoHS., Radio frequency assembly SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG405 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG405 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 2 hole flange cable connection on one end and SMA 2 hole flange cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33191LF-48, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33191LF-48 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 2 hole flange to SMA female 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack 2 hole flange to SMA jack 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 2 hole flange to SMA female 2 hole flange cable 48 inch length using RG405 coax, RoHS. |
| 4 | ||
| PE34191LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Male Cable 36 Inch Length Using PE-020SR Coax, RoHS., Radio frequency assembly SMA male to SMA male cable 36 inch length using PE-020SR coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 36 inch length using PE-020SR coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34191LF-36, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34191LF-36 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 36 inch length using PE-020SR coax, RoHS. |
| 2 | ||
| PE34191LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-020SR, RF Cable Type: PE-020SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using PE-020SR Coax, RoHS., Radio frequency assembly SMA male to SMA male cable 48 inch length using PE-020SR coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using PE-020SR coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE34191LF-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE34191LF-48 is built with PE-020SR which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using PE-020SR coax, RoHS. |
| 1 | ||
| PE3C5191LF-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to Push-On SMP Female Right Angle Cable 72 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly SMA male to push-on SMP female right angle cable 72 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to push-on SMP female right angle cable 72 inch length using RG174 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C5191LF-72 can also be known as a SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3C5191LF-72 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3C5191LF-72 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5191LF-72 can also be used in the other direction and will be a right angle SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3C5191LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to Push-On SMP Female Right Angle Cable 12 Inch Length Using RG174 Coax, LF Solder., Radio frequency assembly SMA male to push-on SMP female right angle cable 12 inch length using RG174 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to push-on SMP female right angle cable 12 inch length using RG174 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C5191LF-12 can also be known as a SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3C5191LF-12 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3C5191LF-12 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5191LF-12 can also be used in the other direction and will be a right angle SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W15191LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMB Plug Right Angle to N Male Right Angle Low Loss Cable Using LMR-100 Coax, LF Solder., Radio frequency assembly SSMB plug right angle to N male right angle low loss cable using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMB plug right angle to N male right angle low loss cable using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SSMB cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle SSMB to right angle type N cable assembly has a plug gender on end 1 and a male on end 2. PE3W15191LF can also be known as a low loss right angle SSMB male to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15191LF RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMB male to type N plug cable assembly PE3W15191LF is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15191LF can also be used in the other direction and will be a right angle type N male to right angle SSMB plug cable assembly if the opposite connectivity is required. Low loss SSMB right angle male to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to type N cable assembly for quick shipment worldwide. Variations of SSMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W15191LF-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMB Plug Right Angle to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax, LF Solder., Radio frequency assembly SSMB plug right angle to N male right angle low loss cable 36 inch length using LMR-100 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMB plug right angle to N male right angle low loss cable 36 inch length using LMR-100 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SSMB cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle SSMB to right angle type N cable assembly has a plug gender on end 1 and a male on end 2. PE3W15191LF-36 can also be known as a low loss right angle SSMB male to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15191LF-36 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SSMB male to type N plug cable assembly PE3W15191LF-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W15191LF-36 can also be used in the other direction and will be a right angle type N male to right angle SSMB plug cable assembly if the opposite connectivity is required. Low loss SSMB right angle male to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMB to type N cable assembly for quick shipment worldwide. Variations of SSMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMB to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2191LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using LMR-400 Coax, LF Solder, RoHS. PE3C2191LF is a reverse polarity TNC male to reverse polarity TNC female cable using LMR-400 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2191LF TNC reverse polarity male to TNC reverse polarity female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C2191LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to Reverse Polarity TNC Female Cable Using LMR-400 Coax with HeatShrink, LF Solder. PE3C2191LF/HS is a reverse polarity TNC male to reverse polarity TNC female cable using LMR-400 coax. This Pasternack reverse polarity TNC male to reverse polarity TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our reverse polarity male TNC to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2191LF/HS TNC reverse polarity male to TNC reverse polarity female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W02191LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-200 Coax, LF Solder. PE3W02191LF is a TNC male to SMA male cable using LMR-200 coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02191LF TNC male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Teledyne HiRel | 54F191LMQB | Teledyne HiRel | UP/DOWN BINARY COUNTER WITH PRESET AND RIPPLE CLOCK | 0 | ||
![]() Vyrian | 84535-191LF | Amphenol Communications Solutions | Board Stacking Connector, 200 Contact(s), 10 Row(s), Female, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Receptacle | 18,296 | ||
| EV1HMC8191LC4 | Analog Devices Inc | 10,670 | ||||
| HMC8191LC4TR-R5 | Analog Devices Inc | Image Rejection Mixer, 6000MHz Min, 26500MHz Max, 11.5dB Conversion Loss-Max RoHS : Compliant | 10,105 | |||
| BCR191L3E6327 | Infineon Technologies AG | 6,865 | ||||
| HMC8191LC4TR | Analog Devices Inc | Image Rejection Mixer, 6000MHz Min, 26500MHz Max, 11.5dB Conversion Loss-Max RoHS : Compliant | 6,284 | |||
| HMC8191LC4 | Analog Devices Inc | Image Rejection Mixer, 6000MHz Min, 26500MHz Max, 11.5dB Conversion Loss-Max RoHS : Compliant | 5,745 | |||
54F191LM![]() | Texas Instruments | Binary Counter, F/FAST Series, Synchronous, Positive Edge Triggered, 4-Bit, Bidirectional, TTL, CQCC20 | 5,105 | |||
54F191LMQB![]() | Texas Instruments | Binary Counter, F/FAST Series, Synchronous, Positive Edge Triggered, 4-Bit, Bidirectional, TTL, CQCC20 | 3,489 | |||
| MC3419-1L | Motorola Semiconductor Products | SLIC, 2-4 Conversion, Bipolar, CDIP18 RoHS : Not Compliant | 753 | |||
![]() Win Source Electronics | HMC8191LC4TR | Analog Devices Inc | SMT I/Q MIXER 6-26.5GHZ RoHS : Compliant |
| 500 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |