 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
18G-TM3-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 DigiKey | 74LVC1G18GW,125 | Nexperia | IC DEMULTIPLEXER 1 X 1:2 6-TSSOP RoHS : Compliant |
| 2,516 | |
| 74LVC1G18GW,125 | Nexperia | IC DEMULTIPLEXER 1 X 1:2 6-TSSOP RoHS : Compliant |
| 2,516 | ||
| 74LVC1G18GW,125 | Nexperia | IC DEMULTIPLEXER 1 X 1:2 6-TSSOP RoHS : Compliant |
| 2,516 | ||
| B18G30-230 | Acopian Power Supplies | AC/DC CONVERTER |
| 1,000 | ||
| BLM LG 1 18 G | Fischer Elektronik GmbH & Co KG | suitable for male header SLM and |
| 1,000 | ||
| NCV4276DS18G | Rochester Electronics LLC | IC REG LINEAR 1.8V 400MA D2PAK-5 |
| 375 | ||
| HTSW-118-18-G-D-LL | JRH ELECTRONICS | CONN HEADER VERT 36POS 2.54MM |
| 113 | ||
| AL418G | INDUSTRIALSUPPLIES.COM | 18"W X 4"H WIRE LEDGE, FINISH |
| 42 | ||
ATS-18G-80-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 30X30X15MM R-TAB T766 RoHS : Compliant |
| 25 | ||
ATS-18G-185-C2-R0 | Advanced Thermal Solutions Inc | HEATSINK 40X40X30MM R-TAB T766 RoHS : Compliant |
| 25 | ||
| ABS 3828 18 G | FIBOX | ENCLOS ABS 11.02LX7.09W SET OF 4 |
| 10 | ||
| QD-RT-K-18G-12 | Omega Engineering | SPECIAL TIP FAST RESPONSE PROBE, |
| 2 | ||
| NBN12-18GM35-E2-V1 | PEPPERL+FUCHS GmbH | INDUCTIVE SEN 12MM NON-FLUSH PNP |
| 2 | ||
| KQXL-18G-12 | Omega Engineering | QUICK DISCONNECT THERMOCOUPLE PR RoHS : Compliant |
| 1 | ||
| AN2.118GLG.00114 | Apacer Technology Inc | USB FLASH DRV 16GB TLC 2.0/3.0 |
| 1 | ||
 Avnet Americas | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% - Tape and Reel (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 32,000 | |
| 74LVC1G18GW,125 | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 - Tape and Reel (Alt: 74LVC1G18GW,125) RoHS : Compliant |
| 27,000 | ||
1N5818G | onsemi | 1.0 A, 30 V, Schottky Rectifier - Bulk (Alt: 1N5818G) RoHS : Compliant |
| 15,000 | ||
ZXMP10A18GTA | Diodes Incorporated | Trans MOSFET P-CH 100V 3.7A 4-Pin(3+Tab) SOT-223 T/R - Tape and Reel (Alt: ZXMP10A18GTA) RoHS : Compliant |
| 9,000 | ||
| LQW18ANR18G8ZD | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQW18ANR18G8ZD) RoHS : Compliant |
| 8,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF - Tape and Reel (Alt: TZMC18-GS08) RoHS : Compliant |
| 7,500 | ||
| TSW-108-18-G-S | Samtec Inc | - Bulk (Alt: TSW-108-18-G-S) RoHS : Compliant |
| 300 | ||
| SCMR18G604SRBB0 | Kyocera AVX Components | - Bulk (Alt: SCMR18G604SRBB0) RoHS : Compliant |
| 230 | ||
| TSW-112-18-G-D | Samtec Inc | - Bulk (Alt: TSW-112-18-G-D) RoHS : Compliant |
| 152 | ||
| EPC7018GC | EPC Space LLC | 100V 90A - Bulk (Alt: EPC7018GC) RoHS : Not Compliant |
| 32 | ||
| ELB-2018/GV17SDR16UYWB/S | Everlight Electronics Co Ltd | - Bulk (Alt: ELB-2018/GV17SDR16UYWB/S) RoHS : Compliant | 20 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR - Boxed Product (Development Kits) (Alt: EK-U1-VCU118-G) RoHS : Not Compliant |
| 4 | ||
| ATS-18G-180-C1-R0 | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-18G-180-C1-R0) RoHS : Compliant |
| 0 | ||
| ATS-18G-185-C2-R0 | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-18G-185-C2-R0) RoHS : Compliant |
| 0 | ||
ATS-18G-191-C3-R0 | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-18G-191-C3-R0) RoHS : Compliant |
| 0 | ||
 Newark | 7447840118G | Wurth Elektronik | MULTILAYER INDUCTOR, 18NH, 0.3A, 0402; RoHS : Compliant |
| 5,330 | |
| 7447840118G | Wurth Elektronik | MULTILAYER INDUCTOR, 18NH, 0.3A, 0402; RoHS : Compliant |
| 5,330 | ||
| CL14218GY | Cliff Electronic Components | COMBINED NUT/BEZEL, S4 JACK SOCKET, GREY; RoHS : Compliant |
| 1,408 | ||
| 10160855-18GLF | Amphenol Communications Solutions | CONN HOUSING, PLUG, 18POS, 3MM; Product Range:Minitek Pwr 3.0 10160855 Series; Gender:Plug; No. of Positions:18Positions; Pitch Spacing:3mm; For Use With:Amphenol FCI Minitek Pwr 3.0 10161703 & 10127719 Series Plug Terminals RoHS Compliant: Yes RoHS : Compliant |
| 600 | ||
| 10159684-18GLF | Amphenol Communications Solutions | CONN HOUSING, RCPT, 18POS, 3MM; Product Range:Minitek Pwr 3.0 10159684 Series; Gender:Receptacle; No. of Positions:18Positions; Pitch Spacing:3mm RoHS Compliant: Yes RoHS : Compliant |
| 600 | ||
| DT-04-18-GY-C | Belden Inc | CBL TIE, NYLON UV RESISTANT, GREY; RoHS : Not Compliant |
| 500 | ||
| 4890-18G | MG Chemicals | SOLDER WIRE, ROSIN ACTIVATED RA, LEADED; RoHS : Not Compliant |
| 164 | ||
| SMS18GE3 | SOURIAU-SUNBANK | SOCKET, PCB, 18WAY; RoHS : Compliant |
| 96 | ||
| TSW-103-18-G-S . | Samtec Inc | CONN, HEADER, 3POS, 1ROW, 2.54MM; RoHS : Compliant |
| 16 | ||
| CAB ABS 403018 G CABINET | FIBOX | Enclosure, IP65, NEMA 13, Wall Mount, 18; RoHS : Compliant |
| 10 | ||
| DX1118/GN | Bulgin | LED INDICATOR, 4MM, GREEN; RoHS : Compliant |
| 8 | ||
| LC2D18G7 | Schneider Electric | CONTACTOR; RoHS : Compliant |
| 2 | ||
| PLE-035018-GY-0.625 | TE Connectivity | LABEL, POLYESTER, GREY, 35MM X 18MM; Available until stocks are exhausted RoHS : Compliant |
| 2 | ||
| 6718 GY005 | Alpha Wire | WIRE, ECO, 12AWG, GN/YL, 30.5M; RoHS : Compliant |
| 1 | ||
| UL PC 2828 18 G | FIBOX | ENCLOSURE PLAST, MULTIPURPOSE, PC; RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | MAX5318GUG+T | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 7,500 | |
| MAX5318GUG+ | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 3,838 | ||
| DS26518GN+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 143 | ||
| MAX8860EUA18+G65 | Analog Devices Inc | Low-Dropout, 300mA Linear Regu RoHS : Compliant | 0 | |||
| DS26518GNB1+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 0 | ||
 RS | 4890-18G | MG Chemicals | SNPB 60/40 ROSIN-CORE SOLDER, 0.032" (0.6 OZ. PACK) |
| 59 | |
| IPH-18GM-V1 (121115) | PEPPERL+FUCHS GmbH | SENSOR IDENT RFID (INDUCTIVE) 121115 |
| 10 | ||
| NBN12-18GM50-E2-V1 (87780) | PEPPERL+FUCHS GmbH | PNP BARREL INDUCTIVE PROXIMITY SENSOR, M12X1,12 MM DETECTION RANGE,10 TO 30V, IP67 |
| 9 | ||
| NCB1.5-18GM60-E2-D-V1 (134439) | PEPPERL+FUCHS GmbH | INDUCTIVE SENSOR, 1.5 MM RANGE, M18 FLUSH, PNP-NO, 10-60 VDC, NCB1 SERIES |
| 8 | ||
| CA18GLF08NA | Carlo Gavazzi Holding AG | CAPACITIVE PROXIMITY SENSOR, CONNECTION TYPE CABLE, OUTPUT NPN, CA18 SERIES |
| 7 | ||
| NBN12-18GM50-E0 (087777) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, 2M, 18MM DIA., NONFLUSH, NPN N.O. |
| 7 | ||
| NBB5-18GM50-E0-V1 (84194) | PEPPERL+FUCHS GmbH | NPN BARRELINDUCTIVE PROXIMITY SENSOR, M18X1,5 MM DETECTION RANGE,10 TO 30VDC, IP67 |
| 5 | ||
| NJ8-18GM50-E0 (282973) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, DC |
| 4 | ||
| NBB8-18GM60-US (198076) | PEPPERL+FUCHS GmbH | SENSOR, PROXIMITY, M18 INDUCTIVE, 8MM RANGE, AC/DC, 2M, PUR, 198076 |
| 4 | ||
| M18GRY2PQ (74051) | Banner Engineering Corp | PANEL MOUNT INDICATOR LED 18MM GREEN RED YEL PIGTAIL EZ-LIGHT M18 SERIES |
| 3 | ||
| TJ36-CASS-18G-6-CC | Omega Engineering | THERMOCOUPLES, TJ PROBES T/C'S |
| 2 | ||
| UDC-18GMA-400-3E3 (235851) | PEPPERL+FUCHS GmbH | SENSOR, ULTRASONIC, 235851 |
| 2 | ||
| M18GXXPQ (78656) | Banner Engineering Corp | INDICATOR LIGHT EZ-LIGHT M18 SERIES GREEN 10-30VDC PNP EURO QD |
| 1 | ||
| NCB5-18GM40-Z0-V1 (126071) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, DC, 126071 |
| 1 | ||
| CJ6-18GK-N-Y22734 (106269) | PEPPERL+FUCHS GmbH | SENSOR, CAPACITIVE, 6MM RANGE, 2 WIRE, NAMUR, 8V, 2M, 18GA, 106269 |
| 1 | ||
 Microchip Technology Inc | SST25PF040CT-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 3,300 | |
| SST25PF040C-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 1,090 | ||
| SST25PF040C-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 100 | ||
| TPG100018-G3 | Microchip Technology Inc | Softlog ICP2LAN(G3) 1-Channel Galvanic Isolated In-Circuit Programmer, Projected EOL: |
| 23 | ||
| ZL50018GAG2 | Microchip Technology Inc | Pb Free 2K + rate conversion and S3 DPLL, BGA, Projected EOL: 2027-09-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| ZL50118GAG2 | Microchip Technology Inc | Pb Free 1 TDM + 2 ETHERNET, BGA, Projected EOL: 2028-01-23 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40I/W18GCPG | Microchip Technology Inc | Industrial-8' Probed No Ink with Map in a jar for CPG, WAFER, Projected EOL: 2046-07-10 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40V/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2045-10-18 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40V/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-18 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/NP18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, UDFN, Projected EOL: 2046-03-13 RoHS : Compliant |
| 0 | ||
 Bisco Industries | ESI-000547-05-11-8-GPB | O-RINGS | 433 | |||
| 3/8-16X1 1/8 G5 ZC | HEX HEAD CAP SCREWS | 240 | ||||
| 3/8-16X1 1/8 G8 Z2 | HEX HEAD CAP SCREWS | 100 | ||||
| M39024/10-18G | Staffall | 78 | ||||
| 2663818G001 | Superior Washer & Gasket Company | 35 | ||||
| BACS18G30B3 | MISC. SPACERS/STANDOFFS/HANDLES | 3 | ||||
| H2G018GA | Gowanda Electronics Corporation | 1 | ||||
| KHXL-18G-RSC-18 | Omega Engineering | RoHS : Compliant | 1 | |||
| FHL18G1-1 | Eaton Bussmann | 1 | ||||
 Rochester Electronics | 74AUP1G18GF,132 | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, XSON6 RoHS : Compliant |
| 59,300 | |
| 74LVC1G18GW,125 | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 3,000 | ||
74AUP1G18GS,132 | Nexperia | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 103,011 | ||
NCV4276DS18G | onsemi | Fixed Positive LDO Regulator, 1.8V, 2.772V Dropout, BIPolar, PSSO5 RoHS : Compliant |
| 375 | ||
NCP1117DT18G | onsemi | LDO Regulator, 1 A, Fixed and Adjustable, Positive Vout: 1.8 V RoHS : Compliant |
| 6,971 | ||
2N4918G | onsemi | 1.0 A, 40 V PNP Bipolar Power Transistor RoHS : Compliant |
| 50,274 | ||
| FC18G-TL | onsemi | N-Channel J-FET+BIP NPN RoHS : Compliant |
| 6,000 | ||
TLK3118GDV | Texas Instruments | Support Circuit, CMOS, PBGA400 RoHS : Not Compliant |
| 1,943 | ||
| MAX9718GEBL+ | Maxim Integrated Products | Audio Amplifier Class AB 1-Channel (Mono) 1.4W RoHS : Compliant |
| 8,711 | ||
MAX9718GEBL+TG45 | Maxim Integrated Products | Audio Amplifier, 1.4W, 1 Channel(s), 1 Func, BICMOS, PBGA9 RoHS : Compliant |
| 520,000 | ||
| UPA2718GR-E1-AT | NEC Electronics Group | Power Field-Effect Transistor, P-Channel MOSFET |
| 5,000 | ||
| UPA2718GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 2,500 | ||
| UPA2718GR-E2-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 19,780 | ||
UPD70F3718GC-8EA-A | Renesas Electronics Corporation | RISC Microcontroller, 32-Bit, FLASH, V850 CPU, 20MHz, CMOS, PQFP100 RoHS : Compliant |
| 51,423 | ||
| SI5335D-B07218-GMR | Skyworks Solutions Inc | Processor Specific Clock Generator, 200MHz, CMOS RoHS : Compliant |
| 2,500 | ||
 TME | MM3Z18GW | Diotec Semiconductor AG | Diode: Zener; 0.3W; 18V; SMD; SOD323; single diode; reel,tape; MM3Z RoHS : Compliant |
| 2,922 | |
| PC 2819 18 G | FIBOX | Enclosure: multipurpose; X: 188mm; Y: 278mm; Z: 180mm; SOLID; grey |
| 5 | ||
| ABS 2828 18 G | FIBOX | Enclosure: multipurpose; X: 278mm; Y: 278mm; Z: 180mm; SOLID; ABS |
| 3 | ||
| 0034.1518.G | Schurter Electronic Components | Fuse: fuse; 5.2x20mm; cylindrical,glass; 1.6A; 250VAC; quick blow RoHS : Compliant |
| 0 | ||
| 99-218GLM2C/L7277SGY-T/EU | Everlight Electronics Co Ltd | LED; white; SMD; Case (mm): 3806; 120°; 20mA; Lens: diffused,yellow |
| 0 | ||
| BZX85C18GP TR | Fagor Electrónica | Diode: Zener; 1.3W; 18V; DO204AL,DO41; single diode; reel; BZX85C |
| 0 | ||
| LQW2BASR18G0CL | Murata Manufacturing Co Ltd | Inductor: wire; SMD; 0805; 180nH; 400mA; R: 0.64Ω; ±2%; LQW; 180mm RoHS : Compliant |
| 0 | ||
| MK21018G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; PIN: 18; soldering,THT; 1.5A |
| 0 | ||
| NBN8-18GK50-E2 | PEPPERL+FUCHS GmbH | Sensor: inductive |
| 0 | ||
| NBN8-18GM50-E0-V1 | PEPPERL+FUCHS GmbH | Sensor: inductive |
| 0 | ||
| PC 1919 18 G | FIBOX | Enclosure: multipurpose; X: 188mm; Y: 188mm; Z: 180mm; SOLID; grey |
| 0 | ||
| LQW2UASR18G0CL | Murata Manufacturing Co Ltd | Inductor: wire; SMD; 1008; 180nH; 620mA; R: 0.77Ω; ±2%; LQW; 180mm RoHS : Compliant |
| 0 | ||
| NBB8-18GM50-E0-V1 | PEPPERL+FUCHS GmbH | Sensor: inductive; OUT: NPN / NO; 0÷8mm; 10÷30VDC; M18; IP67; 200mA |
| 0 | ||
| NBN12-18GM50-E2-V1 | PEPPERL+FUCHS GmbH | Sensor: inductive; OUT: PNP / NO; 0÷12mm; 10÷30VDC; M18; IP67; 200mA |
| 0 | ||
| NCB8-18GM40-N0-V1 | PEPPERL+FUCHS GmbH | Sensor: inductive; OUT: NAMUR; 0÷8mm; 8.2VDC; M18; IP66,IP67; 1500Hz |
| 0 | ||
 Ameya Holding Limited | 1N5818G | onsemi | 1N5818 Series 30 V 1 A Schottky Rectifier Diode - DO-201AD RoHS : Compliant | 9,000 | ||
| BD18GA3WNUX-TR | ROHM Semiconductor | RoHS : Compliant |
| 4,000 | ||
| BD5218G-2MTR | ROHM Semiconductor | Nano Energy™ 延迟时间自由设置型 CMOS复位IC RoHS : Compliant |
| 3,000 | ||
| BD18GA5MEFJ-LBH2 | ROHM Semiconductor | RoHS : Compliant |
| 250 | ||
| BD5218G-2CGTR | ROHM Semiconductor | RoHS : Compliant |
| 230 | ||
| BD18GA5MEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD18GC0JEFJ-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD18GA5VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD5318G-2CGTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD18GA3VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BU4318G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| BU4818G-TR | ROHM Semiconductor | RoHS : Compliant |
| 40 | ||
| BD18GC0MEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
| BD18GC0VEFJ-ME2 | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
 ComSIT USA | RNF10018GNSP | TE Connectivity | AVAILABLE EU | 4,415 | ||
| LQW2BASR18G00L | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 1,596 | |||
| TZMC18GS08 | Vishay Intertechnologies | AVAILABLE EU | 5,233 | |||
ComSIT USA | ZMY18GS08 | Vishay Intertechnologies | ZENER DIODE Zener Diode, 18V V(Z), 6.4%, 1W, Silicon, Unidirectional RoHS : Compliant | 287,350 | ||
| ZY18GPAMP | Fagor Electrónica | 2.0 W GLASS PASSIVATED ZENER DIODE Zener Diode, 18V V(Z), 6.41%, 2W, Silicon, Unidirectional, DO-15 RoHS : Compliant | 24,000 | |||
| TZMB18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 17,790 | |||
| MSM30S0300018GSBK4 | OKI Electric Industry Co Ltd | Electronic Component RoHS : Not Compliant | 4,614 | |||
| 49SMLB10000018GGCET | Pericom Semiconductor Corporation | HC-49, LOW PROFILE, SMD MINIATURE QUARTZ CRYSTAL Series - Fundamental Quartz Crystal, 10MHz Nom RoHS : Compliant | 3,000 | |||
| UPD78C18GQA37A9411 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 2,943 | |||
74LVC1G18GW | NXP Semiconductors | 1-OF-2 NON-INVERTING DEMULTIPLEXER WITH 3-STATE DESELECTED OUTPUT Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 2,435 | |||
| NCP1117DT18G | onsemi | 1.0 AMP LOW-DROPOUT POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.2V Dropout, BIPolar, PSSO2 RoHS : Compliant | 1,650 | |||
| SDIN8DE18GXAT | SanDisk Corporation | Solid-state drive (SSD), SanDisk, 18GB RoHS : Compliant | 1,500 | |||
| UPD78C18GQA40836 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 535 | |||
| 2N4918G | onsemi | MEDIUM-POWER PLASTIC PNP SILICON TRANSISTOR Power Bipolar Transistor, 3A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, TO-225AA, Plastic/Epoxy, 3 Pin RoHS : Compliant | 500 | |||
| 49S03579518GHCE | Saronix | Electronic Component RoHS : Compliant | 400 | |||
| UPD17P218GT | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 72 | |||
| TDA4918G | Siemens | 0.5 A SWITCHING CONTROLLER Switching Controller, Current-mode, 0.5A, 150kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 32 | |||
| LC71N18GC3D | Nortel Networks | Electronic Component RoHS : Not Compliant | 27 | |||
 Interstate Connecting Components | RNF-100-1/8-GY-STK | TE Connectivity | M23053/5-104-8 NB21302001 RNF-100-1/8-GY-STK RoHS : Compliant |
| 0 | |
| CN0966B18G08P8-040 | Cinch Connectivity Solutions | 26500 PLUG 8#12 PIN | 0 | |||
| CN0966B18G08S9-000 | Cinch Connectivity Solutions | 26500 PLUG 8#12 SKT | 0 | |||
| CN0966B18G14SN-000 | Cinch Connectivity Solutions | 26500 PLUG 14#16 SKT | 0 | |||
| CN0967C18G08PN-000 | Cinch Connectivity Solutions | 26500 WALL MT 8#12 PIN | 0 | |||
| CN0967C18G11S9-040 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 SKT | 0 | |||
| CN0967C18G14P7-040 | Cinch Connectivity Solutions | 26500 WALL MT 14#16 PIN | 0 | |||
| CN0967C18G14S8-000 | Cinch Connectivity Solutions | 26500 WALL MT 14#16 SKT | 0 | |||
| CN1020A18G31S8Y040 | Cinch Connectivity Solutions | 26500 PLUG 31#20 SKT | 0 | |||
| CN1021A18G11PN-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 PIN | 0 | |||
| CN1021A18G14P10-000 | Cinch Connectivity Solutions | 26500 WALL MT 14#16 PIN | 0 | |||
| CN1021A18G31PNY040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
| 780-001-18G6-SK | Glenair Inc | RUBBER COVER | 0 | |||
| CN0942F18G31PN16 | Cinch Connectivity Solutions | 0 | ||||
| CN0966B18G11P8-000 | Cinch Connectivity Solutions | 26500 PLUG 10#16 1#2 PIN | 0 | |||
 NexGen Digital | C3CCS-1018G-ND | CW Industries | 10 | |||
RT9080-18GJ5 | Richtek Technology Corp | RoHS : Compliant | 6 | |||
 PEI Genesis | CN0966B18G14SN-000 | Cinch Connectivity Solutions |
| 410 | ||
| CN0967C18G14P7-040 | Cinch Connectivity Solutions |
| 44 | |||
| CN1021A18G11PN-000 | Cinch Connectivity Solutions |
| 44 | |||
| CN0966B18G11P8-000 | Cinch Connectivity Solutions |
| 44 | |||
| CN1021A18G31PNY040 | Cinch Connectivity Solutions |
| 25 | |||
| GA801GG18G10TS | SOURIAU-SUNBANK |
| 0 | |||
| CN0966B18G08P8-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G08S9-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G08PN-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G11S9-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G14S8-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A18G31S8Y040 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G14P10-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G14P9-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G08S10-200 | Cinch Connectivity Solutions |
| 0 | |||
 Powell Electronics | 10160855-18GLF | Amphenol FCi | Cable Assembly |
| 2,769 | |
| TSW-103-18-G-S | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 1,156 | ||
| TSW-104-18-G-S | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 941 | ||
| TSW-113-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 264 | ||
| HTSW-116-18-G-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 229 | ||
| TSW-108-18-G-S-LL | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 213 | ||
| TSW-146-18-G-D | Samtec Inc | PCB Header, 2.54mm Pitch, Through-Hole, RoHS : Compliant |
| 160 | ||
| HTSW-120-18-G-D | Samtec Inc | High-Reliability Tiger Eye Terminal Stri RoHS : Compliant |
| 115 | ||
| HTSW-118-18-G-D-LL | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 113 | ||
| BDL-118-G-E | Samtec Inc | .100 Low Prof Double Row RoHS : Compliant |
| 111 | ||
| HTSW-130-18-G-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 76 | ||
| 10-330952-18G | Amphenol Corporation | Connector |
| 28 | ||
| 18G1309 | Hammond Manufacturing | GALV PANEL FOR WALLMT 16X12 |
| 10 | ||
| 88-538244-18G | Amphenol Corporation | PLUG |
| 2 | ||
| MB18G-0833S | Amphenol Corporation | CONNECTOR |
| 2 | ||
 PUI | 1N5818-G | 10,000 | ||||
| ACZRT55C18-G | 6,000 | |||||
| 2012-1X18G00S/083/045R/I2 | 4,258 | |||||
| 2011-2X18G00RB | 2,000 | |||||
| 2141-2X18G00SA | 1,282 | |||||
| 2044-2X18G00SA | 1,106 | |||||
| 2011-2X18G01RB | 921 | |||||
| 2143-A2X18G00DNU-S | 842 | |||||
| 2011-2X18G01SB | 684 | |||||
| 2115-2X18G00DN-4B | 600 | |||||
| 2011-1X18G00SB | 333 | |||||
| 2012-1X18G00S/8.3/4.5/RB | 300 | |||||
| 2538-B18G00DBT | 200 | |||||
| 2011-1X18G00LB | 200 | |||||
 Richardson RFPD | PEC-36-2G18G-4R5-27-15-SFF | Quantic PMI | LNA MODULE |
| 5 | |
| DTA-18G40G-50-CD-1 | Quantic PMI | DIGITCNTL MMIC ATTNU |
| 2 | ||
| SI5335D-B02418-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5345A-D14718-GM | Skyworks Solutions Inc | Low-jitter, 10-output, any frequency (< 1028 MHz), RoHS : Compliant | 0 | |||
| SI5332BD13418-GM3R | Skyworks Solutions Inc | Low Jitter Clock Generator RoHS : Compliant | 0 | |||
| SI5332DD08618-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT Auto RoHS : Compliant | 0 | |||
| SI5395B-A11418-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| 18GL-07F | Spectrum Control | Attenuator 18GHz 7dB RoHS : Compliant | 0 | |||
| 18GL-11M | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant | 0 | |||
| SI5335B-B10318-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5341B-D09418-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5341D-D13718-GMR | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
| SI5345A-D14718-GMR | Skyworks Solutions Inc | 10 Channel, Any Frequency, Any Output Jitter Atten RoHS : Compliant | 0 | |||
| 18GL-00F | Spectrum Control | Attenuator 18GHz 0dB RoHS : Compliant | 0 | |||
| 18GL-03M | Spectrum Control | Attenuator 18GHz 3dB RoHS : Compliant | 0 | |||
 Rutronik | TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | |
| TZMC18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 90,000 | ||
| TZMC18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 40,000 | ||
| TZMB18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 10,000 | ||
| ZMY18-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 18V 5% MELF RoHS : Compliant |
| 5,000 | ||
 Chip 1 Exchange | MC34018G-S28-R | INSTOCK | 51,529 | |||
| MC34118G-S28-T | INSTOCK | 33,363 | ||||
| 49SMLB11.0592-18GGC | Pericom Semiconductor Corporation | INSTOCK | 23,500 | |||
| 49SMLB11.0592-18GGC | PERE | INSTOCK | 18,500 | |||
| LW V18G-Q2T1-3K5L-1-15 | INSTOCK | 17,488 | ||||
| MTW18GN/VI | INSTOCK | 17,200 | ||||
| 1N5818-G | Comchip Technology Corporation Ltd | INSTOCK | 10,000 | |||
| MC34118G-S28-R | INSTOCK | 9,743 | ||||
| 49SML B10.0000-18GGC-E(T) | Pericom Semiconductor Corporation | INSTOCK | 2,000 | |||
| ZMY18-GS08 | INSTOCK | 1,930 | ||||
| 49SMLB20.0000-18GGC-E | INSTOCK | 950 | ||||
| 4801ED00-718-G | INSTOCK | 559 | ||||
| PS1R85-118GB-L | INSTOCK | 100 | ||||
| TDA4918G | Siemens | INSTOCK | 60 | |||
| SI5318-G-BC | INSTOCK | 20 | ||||
 Avnet Abacus | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 470 ohm 200 mA EMIFIL BLM18GG Series 1 ohm 25 (Alt: BLM18GG471SN1D) RoHS : Compliant | 84,000 | ||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 12,000 | |||
| 73L5R18G | CTS Corporation | SMD Current Sense Resistor 180 Milliohm 2 500 mW 1210 3225 Metric Thick Film - Tape and Reel (Alt: 73L5R18G) RoHS : Compliant | 0 | |||
| 73L3R18G | CTS Corporation | SMD Current Sense Resistor 180 Milliohm 2 125 mW 0805 2012 Metric Thick Film - Tape and Reel (Alt: 73L3R18G) RoHS : Compliant | 0 | |||
| TS-118-G-A | Samtec Inc | Pin Header Precision Machined Terminal BoardtoBoard 254 mm 1 Rows 18 Contacts Through Hole (Alt: TS-118-G-A) RoHS : Compliant | 0 | |||
| DX1118/GN | Bulgin | (Alt: DX1118/GN) RoHS : Compliant | 0 | |||
| SL-118-G-39 | Samtec Inc | Conn Socket Strip SKT 18 POS 254mm Solder ST ThruHole (Alt: SL-118-G-39) RoHS : Compliant | 0 | |||
| 0034.3118.G | Schurter Electronic Components | (Alt: 0034.3118.G) RoHS : Compliant | 0 | |||
| 0034.1518.G | Schurter Electronic Components | (Alt: 0034.1518.G) RoHS : Compliant | 0 | |||
| 36501JR18GTDG | TE Connectivity | Wirewound Inductor 180 nH 14 Ohm 2 125 GHz 250 mA 0603 1608 Metric (Alt: 1879812-4) RoHS : Compliant | 0 | |||
| TSW-103-18-G-S | Samtec Inc | (Alt: TSW-103-18-G-S) RoHS : Compliant | 0 | |||
| TSW-112-18-G-D | Samtec Inc | (Alt: TSW-112-18-G-D) RoHS : Compliant | 0 | |||
| LQG15HSR18G02D | Murata Manufacturing Co Ltd | (Alt: LQG15HSR18G02D) RoHS : Compliant | 0 | |||
| 10-40793-1-18G117 | Glenair Inc | Crimp socket size 8 12mm2 AWG 1814 Gold Plated (Alt: 10-40793-1-18G117) RoHS : Compliant | 0 | |||
| BWCS00231715R18G00 | Pulse Electronics Corporation | Inductor Chip Unshielded Wirewound 180nH 2 100MHZ 50QFactor Ceramic 400mA 0805 TR - Tape and Reel (Alt: BWCS00231715R18G00) RoHS : Compliant | 0 | |||
Avnet Asia | 74LVC1G18GW,125 | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 0 | ||
| TSW-108-18-G-S | Samtec Inc | (Alt: TSW-108-18-G-S) RoHS : Compliant | 0 | |||
| 74AUP1G18GS,132 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, XSON (Alt: 74AUP1G18GS,132) RoHS : Compliant | 0 | |||
| KS DELPS1.22-UHVH-7-H3L4-20-R18-GA | ams OSRAM Group | OOSKS DELPS1.22-UHVH-7-H3L4-20-R18-GA Q6 (Alt: KS DELPS1.22-UHVH-7-H3L4-20-R18-GA) RoHS : Compliant | 0 | |||
| 8020.5018.G | Schurter Electronic Components | (Alt: 8020.5018.G) RoHS : Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| SCMR18G604SRBB0 | Kyocera AVX Components | (Alt: SCMR18G604SRBB0) RoHS : Compliant | 0 | |||
| KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA | ams OSRAM Group | OOSKW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA (Alt: KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA) RoHS : Compliant | 0 | |||
| LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| SF18G | Taiwan Semiconductor | Diode Super Fast Recovery Rectifier 600V 1A 2-Pin DO-204AL T/R (Alt: SF18G) RoHS : Compliant | 0 | |||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 0 | ||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 0 | |||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 0 | |||
 Avnet Silica | 74LVC1G18GW,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC886 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 21,000 | ||
| 74AUP1G18GW,125 | Nexperia | 1to2 Line Demultiplexer 74AUP 1 Channel 12 800 mV to 36 V 6 Pins TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 12,000 | |||
74LVC1G18GV,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC745 (Alt: 74LVC1G18GV,125) RoHS : Compliant | 12,000 | |||
| 1N5818G | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818G) RoHS : Compliant | 7,000 | |||
| MP6518GF-Z | Monolithic Power Systems | MPSMP6518GFZ (Alt: MP6518GF-Z) RoHS : Compliant | 0 | |||
| MP2318GJ-Z | Monolithic Power Systems | Conv DCDC Single Step Down 45V to 24V 8Pin TSOT23 (Alt: MP2318GJ-Z) RoHS : Compliant | 0 | |||
| MPQ2918GF-Z | Monolithic Power Systems | (Alt: MPQ2918GF-Z) RoHS : Compliant | 0 | |||
| N0118GA,412 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 9A 3Pin TO92 Bulk (Alt: N0118GA,412) RoHS : Compliant | 0 | |||
| GS8640Z18GT-167 | GSI Technology | SRAM Chip Sync Dual 25V33V 72MBit 4M x 18 8ns35ns 100Pin TQFP Tray (Alt: GS8640Z18GT-167) RoHS : Compliant | 0 | |||
| GS8640Z18GT-250I | GSI Technology | SRAM Chip Sync Dual 25V33V 72MBit 4M x 18 65ns25ns 100Pin TQFP Tray (Alt: GS8640Z18GT-250I) RoHS : Compliant | 0 | |||
| GS82583ET18GK-675 | GSI Technology | SRAM Chip 288Mbit 16M x 18 675MHz 165Pin BGA (Alt: GS82583ET18GK-675) RoHS : Compliant | 0 | |||
GS81302Q18GE-250I | GSI Technology | SRAM Chip Sync Dual 18V 144MBit 8M x 18 045ns 165Pin FBGA Tray (Alt: GS81302Q18GE-250I) RoHS : Compliant | 0 | |||
| GS81314LQ18GK-125I | GSI Technology | SRAM Chip Sync Single 12V 144MBit 8M x 18 10ns 260Pin BGA (Alt: GS81314LQ18GK-125I) RoHS : Compliant | 0 | |||
| AS5F18G04SNDC-08LIN | Alliance Memory Inc | LGA8 I Serial NAND Flash 18V 4Gbits (Alt: AS5F18G04SNDC-08LIN) RoHS : Compliant | 0 | |||
| R9A07G044L18GBG#BC0 | Renesas Electronics Corporation | (Alt: R9A07G044L18GBG#BC0) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-Q0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| SI5395B-A10118-GM | Skyworks Solutions Inc | Single PLL jitter attenuator with xtal: 12-outputs up to 350 MHz; integer+fractional RoHS : Compliant |
| 0 | ||
| 1003-CM18-GLB | Digi International Inc | 1003-CM18 Plug-in Cell Modem; CAT 18 |
| 0 | ||
 DB Roberts | HXN5/16-18-GR8-STL | HEX NUT | Hex Nut STEEL |
| 395 | |
| HHC5/16-18X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 74 | ||
| HXN1-8-GR8-ZY | HEX NUT | Hex Nut GRADE 8 STEEL ZINC YELLOW |
| 20 | ||
| HXN1-8-GR8-STL | HEX NUT | Hex Nut |
| 10 | ||
| CHC-S18GC | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| RKW-12-18-GN | Essentra Components | CABLE TIE, HOOK LOOP, GREEN | 0 | |||
| 0131218G075 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| 0131218G100 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| M4518GAE | Heyco | LTCG 1/2 BLK 2-5.2MM N/N | 0 | |||
| M4818GAB | Heyco | SCG 875 BLACK 2-4.2MM | 0 | |||
| M6018GCK-SM | Heyco | SSMCG 1-12 NPT 9-8.9MM W9807 | 0 | |||
| HK-DF-18G | Sugatsune Kogyo Co Ltd | HOOK FOR GLASS | 0 | |||
| M6018GDG-SM | Heyco | SSMCG 1-12 NPT 6-10.3MM W9807 | 0 | |||
| CHC-18/GA | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| CHC-18/GB | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
 EBV Elektronik | TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC18-GS08) RoHS : Compliant | 1,062,500 | ||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 177,500 | |||
| DZ23C18-G3-08 | Vishay Intertechnologies | (Alt: DZ23C18-G3-08) RoHS : Compliant | 12,000 | |||
| BXCP-18G-11L-K13-3-A1-00-0-3 | Bridgelux Inc | CSP 1313 KSeries (Alt: BXCP-18G-11L-K13-3-A1-00-0-3) RoHS : Compliant | 12,000 | |||
| BZT55B18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B18-GS08) RoHS : Compliant | 10,000 | |||
| ZMY18-GS08 | Vishay Intertechnologies | (Alt: ZMY18-GS08) RoHS : Compliant | 9,000 | |||
| 99-218GLM2C/L7277SGY-T/EU | Everlight Electronics Co Ltd | LED Chip Pure White 30mA 2Pin SMD TR (Alt: S10C012467) RoHS : Compliant | 6,000 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| BZT55C18-GS08 | Vishay Intertechnologies | (Alt: BZT55C18-GS08) RoHS : Compliant | 2,500 | |||
| N0118GA,412 | WeEn Semiconductor Co Ltd | Thyristor SCR 600V 9A 3Pin TO92 Bulk (Alt: N0118GA,412) RoHS : Compliant | 0 | |||
| BZT52B18-G3-08 | Vishay Intertechnologies | (Alt: BZT52B18-G3-08) RoHS : Compliant | 0 | |||
| BZT55C18-GS18 | Vishay Intertechnologies | (Alt: BZT55C18-GS18) RoHS : Compliant | 0 | |||
| 18-218/GHC-YP2R1RX/3T | Everlight Electronics Co Ltd | LED Single Chip Green 535nm 25mA 2Pin SMD TR (Alt: S10B013839) RoHS : Compliant | 0 | |||
| BXEN-18G-21M-3C-00-0-0 | Bridgelux Inc | Full Flux and Full Vf Bins (Alt: BXEN-18G-21M-3C-00-0-0) RoHS : Compliant | 0 | |||
| BXEN-18G-11M-3C-00-0-5 | Bridgelux Inc | LED SMD 2835 mid power (Alt: BXEN-18G-11M-3C-00-0-5) RoHS : Compliant | 0 | |||
 Flip Electronics | SS9018GBU | onsemi | Stock, Ship Today RoHS : Compliant | 9,570 | ||
| NCP1117DT18G | onsemi | Stock, Ship Today RoHS : Compliant | 4,950 | |||
| 2N4918G | onsemi | Stock, Ship Today RoHS : Compliant | 4,000 | |||
| SI5344A-D10218-GM | Skyworks Solutions Inc | Stock, Ship Today RoHS : Compliant | 865 | |||
| SI5344D-D10218-GM | Skyworks Solutions Inc | Stock | 865 | |||
| R9A07G044L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 664 | |||
| R9A07G054L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 493 | |||
| NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant | 297 | |||
 Maritex | 78L18G-AB3-R | Unisonic Technologies Co Ltd | LDO Regulators; 78L18G-AB3-R; UTC RoHS : Compliant |
| 3,315 | |
| MC34018G-S28-R | Unisonic Technologies Co Ltd | Multimedia Amplifiers; MC34018G-S28-R; UTC |
| 985 | ||
| ST-18G-L50-OO-TR | Sun Rise Exact | Jack socket; female; stereo; 2.5 mm; witch switching contact; SMD |
| 681 | ||
| UN1518G-AE3-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); UN1518G-AE3-R; UTC RoHS : Compliant |
| 500 | ||
| ZXMP10A18GTA | Diodes Incorporated | MOSFETs; ZXMP10A18GTA; DIODES; 2.6 A; 150 m?; -100 V; 3.9 W RoHS : Compliant |
| 299 | ||
| P2118-GR-LN | BEISIT | Cable gland PG21; nylon; PG21 13-18mm; grey; flat O-ring; with lock-nut |
| 100 | ||
| M2518-G-LN | BEISIT | Cabe gland M25; nylon; M25x1.5 13-16mm; flat O-ring; with lock nut; grey |
| 98 | ||
 Master Electronics | MSTBA-2-5/18-G-5-08 | Phoenix Contact | PCB headers - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 18 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.5 mm RoHS : Compliant |
| 73 | |
| 732M-18/G | Teledyne Relays | Electromechanical Relay 18VDC 1.6KOhm 1ADC/0.25AAC DPDT (9.4x10.29x9.76)mm THT Commercial Sensitive Relay RoHS : Compliant |
| 0 | ||
| HTSW-118-18-G-D-LL | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-119-18-G-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-129-18-G-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-134-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-142-18-G-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-143-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-144-18-G-D-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HLT-1518-G-R | Samtec Inc | .100 Screw Machine Terminal Array RoHS : Compliant |
| 0 | ||
| RNF-100-1/8-GY-STK | TE Connectivity | Heat Shrink Tubing ST Polyolefin Gray Single Stick MOQ Reduction RoHS : Compliant |
| 0 | ||
| ELL1-593/4X111/8-G | Thomas & Betts | CDT-15 ELL1-59 3/4X11 1/8- RoHS : Compliant |
| 0 | ||
| NPL3/4X91/8-G | Thomas & Betts | PVC CTD COND NPL 3/4X9-1/8 RoHS : Compliant |
| 0 | ||
| IS-18-G3-S2 | IDEC Corporation | SHORT PROX NPN NO M12 RoHS : Compliant |
| 0 | ||
| APH-0518-G-T | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8818/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax. | 471 | ||
| PE3C8818/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax. | 306 | |||
| PE3C8818/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-36 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-12 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-72 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax. |
| 53 | ||
| PE3C8818/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C8818/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-120 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax. |
| 31 | ||
| PE3C8818/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-300 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax. |
| 12 | ||
 Sager | HTSW-118-18-G-D-LL | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 171 | |
| ATS-18G-180-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| ATS-18G-185-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-18G-191-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-205-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| ATS-18G-80-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-85-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-18G-98-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| HTSW-119-18-G-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HLT-1518-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HLTSB18G | Hubbell Incorporated | CABLEMGT, LAD-RCK,TRI WAL SUPORT,18W,GY |
| 0 | ||
| RNF-100-1/8-GY-STK | TE Connectivity | Heat Shrink Tubing & Sleeves RNF-100-1/8-GY-STK PRICE PER FOOT RoHS : Compliant | 0 | |||
| ELL1-593/4X111/8-G | ABB Group | CDT-15 ELL1-59 3/4X11 1/8-G |
| 0 | ||
| NPL3/4X91/8-G | ABB Group | PVC CTD COND NPL 3/4X9-1/8IN GRAY |
| 0 | ||
| IS-18-G3-S2 | IDEC Corporation | Proximity Sensors SHORT PROX NPN NO M12 |
| 0 | ||
 Venkel Ltd. | WRFI0603-S-R18GT-13 | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | ||
| WRFI1008-S-R18GT | VENKEL LTD | Wirewound RF Inductor;1008;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0805;180nH;�2% RoHS : Not Compliant | 0 | |||
 Vyrian | MPSA18G | onsemi | Small Signal Bipolar Transistor, 0.2A I(C), 45V V(BR)CEO, 1-Element, NPN, Silicon, TO-92 RoHS : Compliant | 11,995 | ||
| 74AUP1G18GM | Nexperia | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 10,295 | |||
| DS26518GB1 | Analog Devices (Maxim Integrated) | 9,001 | ||||
| 74AUP1G18GN | Nexperia | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 8,785 | |||
| MAX8887EZK18-G05 | Analog Devices (Maxim Integrated) | 6,311 | ||||
| SDHA1/8GB | Kingston Technology Company | 5,799 | ||||
| MT18GTF25672FY-667E2D6 | Micron Technology Inc | 5,464 | ||||
| NCV4276DS18G | onsemi | Fixed Positive LDO Regulator, 1.8V, 2.772V Dropout, BIPolar, PSSO5 RoHS : Compliant | 4,931 | |||
| 73M2918-GTR | Texas Instruments | Microcontroller, 8-Bit, 33MHz, CMOS, PQFP100 | 3,299 | |||
| MT58LC128K18G1LG-7TR | Micron Technology Inc | Standard SRAM, 128KX18, CMOS, PQFP100 RoHS : Not Compliant | 3,275 | |||
| MT58LC64K18G1LG-11TR | Micron Technology Inc | Standard SRAM, 64KX18, 6ns, CMOS, PQFP100 RoHS : Not Compliant | 3,260 | |||
| BLM18GG471SN1B | Murata Manufacturing | Ferrite Chip, 1 Function(s), 0.2A, 2 Pin(s) | 796 | |||
| BZT55C18GS18 | Temic Semiconductors | Zener Diode, 18V V(Z), 6.407%, 0.5W, Silicon, Unidirectional | 521 | |||
| BZT55C18-GS18 | Telefunken Microelectronics | Zener Diode, 18V V(Z), 6.407%, 0.5W, Silicon, Unidirectional | 282 | |||
| RT9030-18GQW | Richtek Technology | Regulator | 215 | |||
 Waytek, Inc. | TFFN 18GA YELLOW | Unified Wire and Cable Inc | 18GA Yellow TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 14,000 | |
| TFFN 18GA BLACK | Unified Wire and Cable Inc | 18GA Black TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 5,500 | ||
| TFFN 18GA BROWN | Unified Wire and Cable Inc | 18GA Brown TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 4,000 | ||
| TFFN 18GA BLUE | Unified Wire and Cable Inc | 18GA Blue TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 4,000 | ||
 Win Source Electronics | RT9193-18GB | Richtek Technology Corp | IC REG LDO 1.8V 0.3A SOT23-5 RoHS : Compliant |
| 135,000 | |
| MP3318GC-Z | Monolithic Power Systems | IC LED DRV RGLTR PWM 12WLCSP RoHS : Compliant |
| 102,000 | ||
| MC34018G-S28-R | United Technologies Corporation | 100mWx1@25Ω SOIC-28-300mil Audio Amplifiers RoHS |
| 80,000 | ||
| MAX8510EXK18+G65 | Maxim Integrated Products | IC REG LINEAR 1.8V 120MA SC70-5 RoHS : Compliant |
| 54,820 | ||
RT9018B-18GSP | Richtek Technology Corp | IC REG LDO 1.8V/ADJ 3A 8SOP RoHS : Compliant |
| 38,409 | ||
| MC34118G-S28-R | United Technologies Corporation | 5.5mA SOP-28-300mil Audio Amplifiers RoHS |
| 24,279 | ||
| AP1117E18G-13-ZT | Diodes Incorporated | IC REG LINEAR 1.8V 1A SOT223-3 |
| 20,000 | ||
| ZXMP10A18GTA | Diodes Incorporated | MOSFET P-CH 100V 2.6A SOT223 RoHS : Compliant |
| 20,000 | ||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 470 OHM 0603 1LN RoHS : Compliant |
| 20,000 | ||
| ZMY18-GS08 | Vishay Huntington | DIODE ZENER 18V 1W DO213AB |
| 13,085 | ||
| IS31FL3218-GRLS2 | Lumissil Microsystems | IC LED DRVR LIN I2C 38MA 24SOP / LED Driver IC 18 Output Linear I²C Dimming 38mA 24-SOP RoHS : Compliant |
| 12,000 | ||
| RT9118GQW | Richtek Technology Corp | IC AMP CLASS D STEREO 10W 28WQFN / Amplifier IC 2-Channel (Stereo) Class D 28-WQFN (4x5) RoHS : Compliant |
| 8,439 | ||
| 74LVC1G18GV | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 6,746 | ||
| 74LVC1G18GW | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 4,176 | ||
| M21218G-42 | MACOM | IC VIDEO CABLE DRIVER 8SOIC / Video Driver IC Serial DVB-ASI, SMPTE 8-SOIC Package RoHS : Compliant |
| 97 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand