 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
18G-T92-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% - Tape and Reel (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 32,000 | |
74LVC1G18GW,125 | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 - Tape and Reel (Alt: 74LVC1G18GW,125) RoHS : Compliant |
| 27,000 | ||
1N5818G | onsemi | 1.0 A, 30 V, Schottky Rectifier - Bulk (Alt: 1N5818G) RoHS : Compliant |
| 15,000 | ||
| LQW18ANR18G8ZD | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQW18ANR18G8ZD) RoHS : Compliant |
| 8,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF - Tape and Reel (Alt: TZMC18-GS08) RoHS : Compliant |
| 7,500 | ||
ZXMP10A18GTA | Diodes Incorporated | Trans MOSFET P-CH 100V 3.7A 4-Pin(3+Tab) SOT-223 T/R - Tape and Reel (Alt: ZXMP10A18GTA) RoHS : Compliant |
| 3,000 | ||
| TSW-108-18-G-S | Samtec Inc | - Bulk (Alt: TSW-108-18-G-S) RoHS : Compliant |
| 300 | ||
| SCMR18G604SRBB0 | Kyocera AVX Components | - Bulk (Alt: SCMR18G604SRBB0) RoHS : Compliant |
| 230 | ||
| TSW-112-18-G-D | Samtec Inc | - Bulk (Alt: TSW-112-18-G-D) RoHS : Compliant |
| 152 | ||
| EPC7018GC | EPC Space LLC | 100V 90A - Bulk (Alt: EPC7018GC) RoHS : Not Compliant |
| 32 | ||
| ELB-2018/GV17SDR16UYWB/S | Everlight Electronics Co Ltd | - Bulk (Alt: ELB-2018/GV17SDR16UYWB/S) RoHS : Compliant | 20 | |||
| KTSS-18G-24 | Omega Engineering | - Bulk (Alt: KTSS-18G-24) RoHS : Compliant |
| 0 | ||
| 73L5R18G | CTS Corporation | SMD Current Sense Resistor, 180 Milliohm, ? 2%, 500 mW, 1210 [3225 Metric], Thick Film - Tape and Reel (Alt: 73L5R18G) RoHS : Compliant |
| 0 | ||
| M12JSS-1/8-G-6-D | Omega Engineering | THERMOCOUPLE PROBES WITH AND WITHOUT MOUNTING THREADS AND M12 CONNECTORS - Bulk (Alt: M12JSS-1/8-G-6-D) RoHS : Compliant | 0 | |||
| JQIN-18G-3 | Omega Engineering | - Bulk (Alt: JQIN-18G-3) RoHS : Not Compliant |
| 0 | ||
 Newark | 7447820118G | Wurth Elektronik | MULTILAYER INDUCTOR, 18NH, 0.17A, 0201; RoHS : Compliant |
| 11,095 | |
| 7447820118G | Wurth Elektronik | MULTILAYER INDUCTOR, 18NH, 0.17A, 0201; RoHS : Compliant |
| 11,095 | ||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD, 470OHM, 200MA, 0603; RoHS : Compliant |
| 10,459 | ||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD, 470OHM, 200MA, 0603; RoHS : Compliant |
| 10,459 | ||
| MM3Z18GW | Diotec Semiconductor AG | ZENER DIODE, 18V, 0.3W, SOD-323; RoHS : Compliant |
| 3,000 | ||
| SF18G | Taiwan Semiconductor | RECTIFIER, SINGLE, 600V, 1A, DO-41; RoHS : Compliant |
| 2,160 | ||
| TSW-104-18-G-S | Samtec Inc | HEADER, 2.54MM, THT VERT, 4WAY; RoHS : Compliant |
| 1,426 | ||
| TSW-113-18-G-S | Samtec Inc | HEADER, 2.54MM, THT VERT, 13WAY; RoHS : Compliant |
| 400 | ||
| AS5F18G04SNDB-10LIN | Alliance Memory Inc | FLASH MEMORY, 8GBIT, LGA-8; Flash Memory Type:SLC NAND; Memory Configuration:1G x 8bit; Interfaces:QSPI; IC Case / Package:LGA; No. of Pins:8Pins; Clock Frequency Max:100MHz; Access Time:-; Supply Voltage Min:1.7V RoHS : Not Compliant |
| 317 | ||
| HTSW-125-18-G-D | Samtec Inc | HEADER, 2.54MM, THT VERT, 50WAY; RoHS : Compliant |
| 211 | ||
| 4870-18G | MG Chemicals | SOLDER WIRE, NO CLEAN AND ROSIN FLUX; RoHS : Not Compliant |
| 176 | ||
| BDL-118-G-E | Samtec Inc | HEADER, 2.54MM, VERTICAL THT, 36WAY; RoHS : Compliant |
| 168 | ||
| 39D118G050HP6 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR 1100UF, 50V, +75, -10%, AXIAL; Capacitance:1100µF; Voltage(DC):50V; Capacitance Tolerance:-10%, +75%; Capacitor Terminals:PC Pin; Lifetime @ Temperature:1000 hours @ 105°C; Polarity:Polar; ESR:- RoHS Compliant: No RoHS : Not Compliant |
| 167 | ||
| 4880-18G | MG Chemicals | SOLDER WIRE, ROSIN ACTIVATED RA, LEADED; RoHS : Not Compliant |
| 126 | ||
| E57-18GS05-D1DB | Eaton Cutler-Hammer | INDUCTIVE PROX,18MM,2WDC,SH,NC,M12; RoHS : Not Compliant |
| 6 | ||
 Analog Devices Inc | MAX5318GUG+T | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 7,500 | |
| MAX5318GUG+ | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 3,834 | ||
| DS26518GN+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 143 | ||
| DS26518GNB1+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 0 | ||
| MAX8860EUA18+G65 | Analog Devices Inc | Low-Dropout, 300mA Linear Regu RoHS : Compliant | 0 | |||
 RS | 4870-18G | MG Chemicals | SNPB 60/40 NO-CLEAN SOLDER, 0.032" (0.6 OZ. PACK) |
| 30 | |
| NCN8-18GM60-B3B-V1 (230829) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, OTHER, 230829 |
| 10 | ||
| NMB10-18GM65-E2-V1 (911271) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, CYLINDRICAL, METAL FACE, PILE DRIVER, SENSING DIS |
| 10 | ||
| NJ5-18GK-N-150 (106447) | PEPPERL+FUCHS GmbH | INDUCTIVE SENSORS - NAMUR, NJ5 SERIES |
| 6 | ||
| NJ8-18GM50-E0 (282973) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, DC |
| 4 | ||
| NBB8-18GM60-US (198076) | PEPPERL+FUCHS GmbH | SENSOR, PROXIMITY, M18 INDUCTIVE, 8MM RANGE, AC/DC, 2M, PUR, 198076 |
| 4 | ||
| NJ5-18GM50-E-V1 (282964) | PEPPERL+FUCHS GmbH | INDUCTIVE DC |
| 4 | ||
| R18-GK | Norgren | GASKET KIT: |
| 3 | ||
| NBN12-18GM50-A2-V1 (187656) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR, CYLINDRICAL, NON-FLUSH, NBN12 SERIES |
| 3 | ||
| VS18G517DF313A | Norgren | VALVE, 5/2, SOL/SPRING RTN, INT PILOT, 23-145PSI, 24VDC, PUSH ONLY OVERRIDE |
| 2 | ||
| TJ36-CASS-18G-6-CC | Omega Engineering | THERMOCOUPLES, TJ PROBES T/C'S |
| 2 | ||
| ICSS-18G-6-PFA | Omega Engineering | PFA COATED QUICK DISCONNECT |
| 1 | ||
| NBB5-18GM60-WO (124312) | PEPPERL+FUCHS GmbH | 2-WIRE AC BARREL INDUCTIVE PROXIMITY SENSOR 5 MM DETECTION RANGE 20 TO 253V IP67 |
| 1 | ||
| CJ6-18GK-N-Y22734 (106269) | PEPPERL+FUCHS GmbH | SENSOR, CAPACITIVE, 6MM RANGE, 2 WIRE, NAMUR, 8V, 2M, 18GA, 106269 |
| 1 | ||
| NCB8-18GM40-N0-5M (204724) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, NAMUR, 8MM RANGE, 2 WIRE, 8VDC, 5 METER, 204724 |
| 1 | ||
 Microchip Technology Inc | SST25PF040CT-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 3,300 | |
| SST25PF040C-40V/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-18 RoHS : Compliant |
| 400 | ||
| SST25PF040C-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 100 | ||
| SST25PF040C-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 90 | ||
| TPG100018-G3 | Microchip Technology Inc | Softlog ICP2LAN(G3) 1-Channel Galvanic Isolated In-Circuit Programmer, Projected EOL: |
| 23 | ||
| ZL50118GAG2 | Microchip Technology Inc | Pb Free 1 TDM + 2 ETHERNET, BGA, Projected EOL: 2028-01-23 - Contact for Pricing RoHS : Compliant | 0 | |||
| ZL50018GAG2 | Microchip Technology Inc | Pb Free 2K + rate conversion and S3 DPLL, BGA, Projected EOL: 2027-09-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40I/W18GCPG | Microchip Technology Inc | Industrial-8' Probed No Ink with Map in a jar for CPG, WAFER, Projected EOL: 2046-07-10 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40V/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2045-10-18 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/NP18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, UDFN, Projected EOL: 2046-03-13 RoHS : Compliant |
| 0 | ||
 Bisco Industries | ESI-000547-05-11-8-GPB | O-RINGS | 433 | |||
| 3/8-16X1 1/8 G5 ZC | HEX HEAD CAP SCREWS | 240 | ||||
| 3/8-16X1 1/8 G8 Z2 | HEX HEAD CAP SCREWS | 100 | ||||
| M39024/10-18G | Staffall | 78 | ||||
| 2663818G001 | Superior Washer & Gasket Company | 35 | ||||
| BACS18G30B3 | MISC. SPACERS/STANDOFFS/HANDLES | 3 | ||||
| KHXL-18G-RSC-18 | Omega Engineering | RoHS : Compliant | 1 | |||
| FHL18G1-1 | Eaton Bussmann | 1 | ||||
| H2G018GA | Gowanda Electronics Corporation | 1 | ||||
 Rochester Electronics | 74AUP1G18GF/S500,132 | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, XSON6 RoHS : Compliant |
| 96,300 | |
74AUP1G18GM,115 | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant |
| 220,000 | ||
74AUP1G18GF,132 | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, XSON6 RoHS : Compliant |
| 59,300 | ||
74AUP1G18GN,132 | NXP Semiconductors | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 5,000 | ||
| 74AUP1G18GW,125 | Nexperia | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V SOT-363 T/R RoHS : Compliant |
| 3,000 | ||
74AUP1G18GM,115 | Nexperia | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant |
| 185,000 | ||
74AUP1G18GN,132 | Nexperia | IC Demultiplexer 1 Element 1 x 1:2 MUX/DEMUX 800mV - 3.6V 6-SON T/R RoHS : Compliant |
| 95,444 | ||
2N4918G | onsemi | 1.0 A, 40 V PNP Bipolar Power Transistor RoHS : Compliant |
| 50,274 | ||
NCP3218GMNR2G | onsemi | NCP3218 - 7-Bit, Programmable, 3-Phase, Mobile CPU Synchronous Buck Controller RoHS : Compliant |
| 6,985 | ||
TLK3118GDV | Texas Instruments | Support Circuit, CMOS, PBGA400 RoHS : Not Compliant |
| 1,943 | ||
PLDC18G8-15JC | Cypress Semiconductor | OT PLD, 15ns, PAL-Type, CMOS, PQCC20 RoHS : Not Compliant |
| 364 | ||
| DS26518GB1+ | Maxim Integrated Products | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 7 | ||
| MAX9718GEBL+ | Maxim Integrated Products | Audio Amplifier Class AB 1-Channel (Mono) 1.4W RoHS : Compliant |
| 8,711 | ||
| MAX9718GEBL+G45 | Maxim Integrated Products | Audio Amplifier, 0.475W, 1 Channel(s), 1 Func, BICMOS, PBGA9 RoHS : Compliant |
| 1,266 | ||
| RAA228218GNP#HA0 | Renesas Electronics Corporation | RAA228218 - Digital Single Output, 20-Phase PWM Controller with Adaptive Voltage Scaling Bus (AVSBus) RoHS : Compliant |
| 24,000 | ||
 Sager | TSW-112-18-G-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| TSW-136-18-G-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
| TSW-145-18-G-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 3115C0118G3-40 | ABB Group | VBM PLUG AND CABLE ASSEMBLY, 40FT |
| 0 | ||
| 4700-01K18G386 | TE Connectivity | TE Connectivity | 0 | |||
| SL-118-G-32 | Samtec Inc | Headers & Wire Housings .100 Low Profile Single Row Screw Machine Socket Strip RoHS : Compliant |
| 0 | ||
| BBL-118-G-F | Samtec Inc | Headers & Wire Housings .100 Low Profile Single Row, Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| 2018G3-BK | Anderson Power Products | SDG 400 ULTRASHORT OUTPUT KEY, TAPERED LATCH, 25A, WITH CONTACTS, 1.0 MM PANEL THICKNESS | 0 | |||
| 3179B0018G1 | ABB Group | Thomas & Betts |
| 0 | ||
| 45-2630.18G0.000 | EAO AG | Switch Actuators Mushroom-head pushbutton actuator illuminated yellow transparent D30 maintain front/housing plastic RoHS : Compliant |
| 0 | ||
ATS-18G-03-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
ATS-18G-08-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
| ATS-18G-114-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-204-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-18G-209-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,COARSE-PITCH,XCUT, HOLE PATTERN:4-CORNER,BLUE,T412 RoHS : Compliant |
| 0 | ||
 TME | AISC-0603-R18G-T | Abracon Corporation | Inductor: wire; SMD; 180nH; ±2%; 1.8x1.12x1.02mm; 1.38Ω; -40÷125°C RoHS : Compliant |
| 21,000 | |
| CAB PC 302018 G3B | FIBOX | Enclosure: wall mounting; X: 200mm; Y: 300mm; Z: 180mm; CAB; grey |
| 1 | ||
| 19-218/GHC-YQ1R2QY/3T | Everlight Electronics Co Ltd | LED; green; SMD; 0603; 72mcd; 120°; 5mA; 518nm; Lens: transparent RoHS : Compliant |
| 0 | ||
| BLM2SMD18G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 18; SMT; 1.5A; 125V; 2x9 |
| 0 | ||
| E57-18GS05-A | Eaton Corporation | Sensor: inductive; Range: 0÷5mm; 20÷250VAC; OUT: 2-wire NO; M18 |
| 0 | ||
| E57-18GU08-A | Eaton Corporation | Sensor: inductive; Range: 0÷8mm; 20÷250VAC; OUT: 2-wire NO; M18 |
| 0 | ||
| CAB PC 304018 G3B | FIBOX | Enclosure: wall mounting; X: 300mm; Y: 400mm; Z: 180mm; CAB; grey |
| 0 | ||
| PC 3828 18 G | FIBOX | Enclosure: multipurpose; X: 278mm; Y: 378mm; Z: 180mm; SOLID; grey |
| 0 | ||
| PV5S24018G | E-Switch Inc | Switch: vandal resistant; Pos: 2; SPST-NO; PV5; 2A/36VDC; IP65; gold RoHS : Compliant |
| 0 | ||
| SFT18G | Taiwan Semiconductor | Diode: rectifying; THT; 600V; 1A; TS1; 35ns RoHS : Compliant |
| 0 | ||
| SL12SMD03218GBSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 18; SMT; 3A; 250V; 1x18 |
| 0 | ||
| SL410118G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 18; THT; 3A; 250V; SL 4 RoHS : Compliant |
| 0 | ||
| SLLP6SMD06618GBTR | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 18; SMT; 3A; 250V; 2x9 |
| 0 | ||
| SLLP6SMD06618GSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 18; SMT; 3A; 250V; 2x9 |
| 0 | ||
| SLVW2KA05418G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 18; THT; 1.5A; 125V |
| 0 | ||
 ComSIT USA | RNF10018GNSP | TE Connectivity | AVAILABLE EU | 4,415 | ||
ComSIT USA | TZMC18GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 90,000 | ||
| BZT55C18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.41%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 20,000 | |||
| BZT52C18GS18 | v | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.6%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| CCONSMAFSTEL18G | Adolf Wuerth Gmbh & Co Kg | Electronic Component RoHS : Compliant | 7,500 | |||
| 1N5818G | onsemi | AXIAL LEAD RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 1A, 30V V(RRM), Silicon, DO-41 RoHS : Compliant | 5,000 | |||
| BZY97C18GP | Fagor Electrónica | 1.5 W ZENER DIODE Zener Diode, 18V V(Z), 6.4%, 1.5W, Silicon, Unidirectional, DO-41 RoHS : Compliant | 4,985 | |||
| MSM30S0300018GSBK4 | OKI Electric Industry Co Ltd | Electronic Component RoHS : Not Compliant | 4,614 | |||
74LVC1G18GW | NXP Semiconductors | 1-OF-2 NON-INVERTING DEMULTIPLEXER WITH 3-STATE DESELECTED OUTPUT Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 2,435 | |||
| SDIN8DE18GXAT | SanDisk Corporation | Solid-state drive (SSD), SanDisk, 18GB RoHS : Compliant | 1,500 | |||
| 2N4918G | onsemi | MEDIUM-POWER PLASTIC PNP SILICON TRANSISTOR Power Bipolar Transistor, 3A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, TO-225AA, Plastic/Epoxy, 3 Pin RoHS : Compliant | 500 | |||
| MC78M18G | onsemi | 500 MILLIAMP POSITIVE VOLTAGE REGULATOR Fixed Positive Standard Regulator, 18VBIPolar, PSFM3 RoHS : Compliant | 55 | |||
| UPD78F0818GKA9ET | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 53 | |||
| TDA4918G | Siemens | 0.5 A SWITCHING CONTROLLER Switching Controller, Current-mode, 0.5A, 150kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 32 | |||
| SA4018GWA | Kingbright | 7 Seg Numeric LED Display, Green, 101.2mm RoHS : Compliant | 30 | |||
| LC71N18GC3D | Nortel Networks | Electronic Component RoHS : Not Compliant | 27 | |||
 Interstate Connecting Components | 660-008B18G5-05 | Glenair Inc | PROTECTIVE COVER |
| 0 | |
| CN0966B18G14P8-040 | Cinch Connectivity Solutions | 26500 PLUG 14#16 PIN | 0 | |||
| CN0966B18G14S9-000 | Cinch Connectivity Solutions | 26500 PLUG 14#16 SKT | 0 | |||
| CN0967C18G08P9-000 | Cinch Connectivity Solutions | 26500 WALL MT 8#12 PIN | 0 | |||
| CN0967C18G14PN-000 | Cinch Connectivity Solutions | SQ FLANGE MNT RECEPT L/C THREADED COUPLING |
| 0 | ||
| CN1020A18G31PNY040 | Cinch Connectivity Solutions | 26500 PLUG 31#20 PIN | 0 | |||
| CN1021A18G08S6-040 | Cinch Connectivity Solutions | 26500 WALL MT 8#12 SKT | 0 | |||
| CN1021A18G11P9-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 PIN | 0 | |||
| CN1021A18G31P9Y040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
| 780-001-18G10-WS | Glenair Inc | 0 | ||||
| 780-001-18G12-SK | Glenair Inc | RUBBER COVER | 0 | |||
| CN0942B18G31PN16 | Cinch Connectivity Solutions | 0 | ||||
| CN0967C18G08S10-040 | Cinch Connectivity Solutions | 26500 WALL MT 8#12 SKT | 0 | |||
| CN0967C18G11P6-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 PIN | 0 | |||
| CN0967C18G31P6Y040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
 NexGen Digital | C3CCS-1018G-ND | CW Industries | 10 | |||
RT9080-18GJ5 | Richtek Technology Corp | RoHS : Compliant | 6 | |||
 PEI Genesis | CN0966B18G14S8-200 | Cinch Connectivity Solutions |
| 240 | ||
| CN0966B18G14P8-040 | Cinch Connectivity Solutions |
| 214 | |||
| CN1021A18G08S6-040 | Cinch Connectivity Solutions |
| 208 | |||
| CN1020A18G08S7-240 | Cinch Connectivity Solutions |
| 30 | |||
| CN0967C18G14PN-000 | Cinch Connectivity Solutions |
| 23 | |||
| CN0966B18G08S6-200 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G14S9-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G08P9-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G11P9-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN1021A18G31P9Y040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G08PN-200 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G08S10-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G11P6-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G31P6Y040 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A18G08P7-000 | Cinch Connectivity Solutions |
| 0 | |||
 Powell Electronics | TSW-104-18-G-S | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 941 | |
| TSW-113-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 264 | ||
| HTSW-125-18-G-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 139 | ||
| TSW-150-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 139 | ||
| BBD-118-G-B | Samtec Inc | ".100" Double Row RoHS : Compliant |
| 130 | ||
| BDL-118-G-E | Samtec Inc | .100 Low Prof Double Row RoHS : Compliant |
| 111 | ||
| TSW-127-18-G-S | Samtec Inc | PCB Header, 2.54mm Pitch, Through-Hole, RoHS : Compliant |
| 73 | ||
| 18G1713 | Hammond Manufacturing | GALV PANEL FOR WALLMT 20X16 |
| 59 | ||
| 10-101984-18G | Amphenol Corporation | Connector |
| 43 | ||
| 18G1515 | Hammond Manufacturing | GALV PANEL FOR WALLMT 18X18 |
| 22 | ||
| 18G2109 | Hammond Manufacturing | GALV PANEL FOR WALLMT 24X12 |
| 5 | ||
| 1589T18G1 | Hammond Manufacturing | 20 AMP P/B, 18" LONG, 6 RECP |
| 3 | ||
| 780-001-18G12-SK | Glenair Inc | PROTECTIVE COVERS - RUBBER COVER |
| 2 | ||
| RP3718G119 | CII Guardian | MIL/AERO RELAY RP3718G119 |
| 2 | ||
| 18G6927 | Hammond Manufacturing | GALV PANEL FOR WALLMT 72X30 |
| 1 | ||
 PUI | 1N5818-G | 10,000 | ||||
| ACZRT55C18-G | 6,000 | |||||
| 2012-1X18G00S/083/045R/I2 | 4,258 | |||||
| 2011-2X18G00RB | 2,000 | |||||
| 2141-2X18G00SA | 1,282 | |||||
| 2044-2X18G00SA | 1,106 | |||||
| 2011-2X18G01RB | 921 | |||||
| 2143-A2X18G00DNU-S | 842 | |||||
| 2011-2X18G01SB | 684 | |||||
| 2115-2X18G00DN-4B | 600 | |||||
| 2011-1X18G00SB | 333 | |||||
| 2012-1X18G00S/8.3/4.5/RB | 300 | |||||
| 2011-1X18G00LB | 200 | |||||
| 2538-B18G00DBT | 200 | |||||
 Richardson RFPD | PVA-500M18G-60-SFF | Quantic PMI | VARI VOLTAGE ATTENUA |
| 10 | |
| SI5332DD08818-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT Auto RoHS : Compliant | 0 | |||
| SI5335D-B10618-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5338A-B04518-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5341B-D10918-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5344D-D06918-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| SI5345B-D07318-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5332BD11518-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| SI5338B-B09018-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338N-B02118-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5341A-D06618-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| SI5341B-D08318-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5344A-D10218-GM | Skyworks Solutions Inc | 10-Channel, Any-Frequency, Any-Output Jitter Atten RoHS : Compliant | 0 | |||
| SI5348B-E11318-GMR | Skyworks Solutions Inc | Network Synchronizer for SyncE/ 1588 PTP Telecom B RoHS : Compliant | 0 | |||
| SI5332DD13318-GM2R | Skyworks Solutions Inc | 6 8 12 Output Any Frequency Clock Generator RoHS : Compliant | 0 | |||
 Rutronik | LQW18ANR18G0ZD | Murata Manufacturing Co Ltd | LQW18A 180nH 140mA 2% WWT RoHS : Compliant |
| 108,000 | |
| TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 90,000 | ||
| TZMC18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 40,000 | ||
| TZMB18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 10,000 | ||
| ZMY18-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 18V 5% MELF RoHS : Compliant |
| 5,000 | ||
 Chip 1 Exchange | LW V18G-Q2T1-3K5L-1-15 | INSTOCK | 17,488 | |||
| 1N5818-G | Comchip Technology Corporation Ltd | INSTOCK | 10,000 | |||
| MC34118G-S28-R | INSTOCK | 9,743 | ||||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 5,028 | |||
| 49SML B10.0000-18GGC-E(T) | Pericom Semiconductor Corporation | INSTOCK | 2,000 | |||
| ZMY18-GS08 | INSTOCK | 1,930 | ||||
| TZMC18-GS08 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 1,245 | |||
| 49SMLB20.0000-18GGC-E | INSTOCK | 950 | ||||
| 62110D200-018-G | INSTOCK | 388 | ||||
| 13A18GG1111Q | Aces Electronics Co Ltd | INSTOCK | 308 | |||
| SMS18GE6 | SOU | INSTOCK | 62 | |||
| TDA4918G | Siemens | INSTOCK | 60 | |||
| MSTBV-2,5/18-G-5,08 | INSTOCK | 40 | ||||
| 13A18GG1111Q | INSTOCK | 14 | ||||
| MST6U18GL-LF | INSTOCK | 10 | ||||
 Avnet Abacus | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 470 ohm 200 mA EMIFIL BLM18GG Series 1 ohm 25 (Alt: BLM18GG471SN1D) RoHS : Compliant | 84,000 | ||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 12,000 | |||
| 73L5R18G | CTS Corporation | SMD Current Sense Resistor 180 Milliohm 2 500 mW 1210 3225 Metric Thick Film - Tape and Reel (Alt: 73L5R18G) RoHS : Compliant | 0 | |||
| DX1118/GN | Bulgin | (Alt: DX1118/GN) RoHS : Compliant | 0 | |||
| CW160808-R18G | Bourns Inc | Wirewound Inductor 180 nH 125 Ohm 2 1 GHz 240 mA 0603 1608 Metric - Tape and Reel (Alt: CW160808-R18G) RoHS : Compliant | 0 | |||
| 36501JR18GTDG | TE Connectivity | Wirewound Inductor 180 nH 14 Ohm 2 125 GHz 250 mA 0603 1608 Metric (Alt: 1879812-4) RoHS : Compliant | 0 | |||
| PKJ 4618GE PI | Flex Ltd | Module DCDC 1OUT 18V 36A 65W 9Pin HalfBrick (Alt: PKJ 4618GE PI) RoHS : Compliant | 0 | |||
| LQG15HSR18G02D | Murata Manufacturing Co Ltd | (Alt: LQG15HSR18G02D) RoHS : Compliant | 0 | |||
| LQW18ANR18G0ZD | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G0ZD) RoHS : Compliant | 0 | |||
| LQG15HZR18G02D | Murata Manufacturing Co Ltd | (Alt: LQG15HZR18G02D) RoHS : Compliant | 0 | |||
| LQW2UASR18G0CL | Murata Manufacturing Co Ltd | (Alt: LQW2UASR18G0CL) RoHS : Compliant | 0 | |||
| LQG15HHR18G02D | Murata Manufacturing Co Ltd | (Alt: LQG15HHR18G02D) RoHS : Compliant | 0 | |||
| TSW-107-18-G-D | Samtec Inc | (Alt: TSW-107-18-G-D) RoHS : Compliant | 0 | |||
| TSW-110-18-G-D | Samtec Inc | (Alt: TSW-110-18-G-D) RoHS : Compliant | 0 | |||
| BWCS00292821R18G00 | Pulse Electronics Corporation | Inductor Chip Unshielded Wirewound 180nH 2 25MHZ 45QFactor Ceramic 620mA 1008 TR - Tape and Reel (Alt: BWCS00292821R18G00) RoHS : Compliant | 0 | |||
Avnet Asia | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 0 | |
| SF18G | Taiwan Semiconductor | Diode Super Fast Recovery Rectifier 600V 1A 2-Pin DO-204AL T/R (Alt: SF18G) RoHS : Compliant | 0 | |||
| LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| 74AUP1G18GW,125 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 0 | |||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| TSW-108-18-G-D | Samtec Inc | (Alt: TSW-108-18-G-D) RoHS : Compliant | 0 | |||
| KS DELPS1.22-UHVH-7-H3L4-20-R18-GA | ams OSRAM Group | OOSKS DELPS1.22-UHVH-7-H3L4-20-R18-GA Q6 (Alt: KS DELPS1.22-UHVH-7-H3L4-20-R18-GA) RoHS : Compliant | 0 | |||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 0 | |||
74AUP1G18GS,132 | Nexperia | 1-to-2 Line Demultiplexer, 74AUP, 1 Channel, 1:2, 800 mV to , 3.6 V, 6 Pins, XSON (Alt: 74AUP1G18GS,132) RoHS : Compliant | 0 | |||
| 74LVC1G18GW,125 | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 0 | |||
| KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA | ams OSRAM Group | OOSKW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA (Alt: KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA) RoHS : Compliant | 0 | |||
| SCMR18G604SRBB0 | Kyocera AVX Components | (Alt: SCMR18G604SRBB0) RoHS : Compliant | 0 | |||
 Avnet Silica | 74LVC1G18GW,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC886 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 21,000 | ||
| 74AUP1G18GW,125 | Nexperia | 1to2 Line Demultiplexer 74AUP 1 Channel 12 800 mV to 36 V 6 Pins TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 12,000 | |||
74LVC1G18GV,125 | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC745 (Alt: 74LVC1G18GV,125) RoHS : Compliant | 12,000 | |||
| 1N5818G | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818G) RoHS : Compliant | 7,000 | |||
| MP5018GD-P | Monolithic Power Systems | (Alt: MP5018GD-P) RoHS : Compliant | 0 | |||
| MPQ2918GF-P | Monolithic Power Systems | (Alt: MPQ2918GF-P) RoHS : Compliant | 0 | |||
| NCP81418GEVK | onsemi | NCP81428 AND NCP81418 EVALUATION BOARD (Alt: NCP81418GEVK) RoHS : Not Compliant | 0 | |||
GS81302T18GE-300 | GSI Technology | SRAM Chip Sync Dual 18V 144MBit 8M x 18 045ns 165Pin FBGA Tray (Alt: GS81302T18GE-300) RoHS : Compliant | 0 | |||
GS8640FZ18GT-6.5I | GSI Technology | SRAM Chip Sync Dual 33V 72MBit 4M x 18 65ns 100Pin TQFP Tray (Alt: GS8640FZ18GT-6.5I) RoHS : Compliant | 0 | |||
| MPQ2918GLE-AEC1-Z | Monolithic Power Systems | (Alt: MPQ2918GLE-AEC1-Z) RoHS : Compliant | 0 | |||
GS81284Z18GB-200V | GSI Technology | SRAM Chip Sync Dual 18V25V 144MBit 8M x 18 75ns3ns 119Pin FBGA Tray (Alt: GS81284Z18GB-200V) RoHS : Compliant | 0 | |||
| GS8640Z18GT-167IV | GSI Technology | SRAM Chip Sync Dual 18V25V 72MBit 4M x 18 8ns35ns 100Pin TQFP Tray (Alt: GS8640Z18GT-167IV) RoHS : Compliant | 0 | |||
| SIEMP2318GJ-C707-Z | Monolithic Power Systems | (Alt: MP2318GJ-C707-Z) RoHS : Compliant | 0 | |||
| GS82564Z18GB-150IV | GSI Technology | 119 BGAINDUS (Alt: GS82564Z18GB-150IV) RoHS : Compliant | 0 | |||
| AS5F18G04SNDC-08LIN | Alliance Memory Inc | LGA8 I Serial NAND Flash 18V 4Gbits (Alt: AS5F18G04SNDC-08LIN) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-Q0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| SI5395B-A10118-GM | Skyworks Solutions Inc | Single PLL jitter attenuator with xtal: 12-outputs up to 350 MHz; integer+fractional RoHS : Compliant |
| 0 | ||
| AISC-Q0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| 1003-CM18-GLB | Digi International Inc | 1003-CM18 Plug-in Cell Modem; CAT 18 |
| 0 | ||
 Component Electronics, Inc | AP1117E18G-13 | Diodes Incorporated | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,375 | |
| 39D118G030GP6 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 212 | ||
| GM1203PFV1-8GN | SUNON USA | IN STOCK SHIP TODAY |
| 90 | ||
| 39D218G010FP6 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | ||
| TSW-104-18-G-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| EPB5218G | PCA Electronics Inc | IN STOCK SHIP TODAY | 48 | |||
| BDL-118-G-E | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 35 | ||
| NBB5-18GM40-Z0 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 9 | ||
| NT2K18GG93 | Nortel Networks | IN STOCK SHIP TODAY | 7 | |||
| 617-H018GAJ103 | Amphenol Corporation | IN STOCK SHIP TODAY | 6 | |||
| NT2K18GH-35 | Nortel Networks | IN STOCK SHIP TODAY | 6 | |||
RT9018B-18GSP | Richtek Technology Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| GM1235PFV1-8.GN | SUNON USA | IN STOCK SHIP TODAY |
| 4 | ||
| NJ5-18GM50-E2 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
| NBB5-18GM50-E2-V1 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | HXN5/16-18-GR5-ZI | HEX NUT | Hex Nut |
| 2,260 | |
| HXN5/16-18-GR8-STL | HEX NUT | Hex Nut STEEL |
| 395 | ||
| HHC3/8-16X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 256 | ||
| HHC5/16-18X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 74 | ||
| FLW1-1/8-GR8-ZY | FLAT WASHER | Flat Washer GRADE 8 STEEL ZINC YELLOW |
| 73 | ||
| NB08PT-18-GB1832 | Avdel | NB08PT-18 TOOL GB | 0 | |||
| 0131218G050 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| RKW-12-18-GN | Essentra Components | CABLE TIE, HOOK LOOP, GREEN | 0 | |||
| CHC-18/GB | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| DCB118-GB-SEF | Avdel | XR FLEXVOLT CHARGER - GB | 0 | |||
| M4518GAE | Heyco | LTCG 1/2 BLK 2-5.2MM N/N | 0 | |||
| M4818GAB | Heyco | SCG 875 BLACK 2-4.2MM | 0 | |||
| HK-DF-18G | Sugatsune Kogyo Co Ltd | HOOK FOR GLASS | 0 | |||
| 0131218G100 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| M4818GAE | Heyco | SCG 875 BLACK 2-5.2MM | 0 | |||
 EBV Elektronik | TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC18-GS08) RoHS : Compliant | 1,062,500 | ||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 177,500 | |||
| DZ23C18-G3-08 | Vishay Intertechnologies | (Alt: DZ23C18-G3-08) RoHS : Compliant | 12,000 | |||
| BXCP-18G-11L-K13-3-A1-00-0-3 | Bridgelux Inc | CSP 1313 KSeries (Alt: BXCP-18G-11L-K13-3-A1-00-0-3) RoHS : Compliant | 12,000 | |||
| BZT55B18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B18-GS08) RoHS : Compliant | 10,000 | |||
| ZMY18-GS08 | Vishay Intertechnologies | (Alt: ZMY18-GS08) RoHS : Compliant | 9,000 | |||
| 99-218GLM2C/L7277SGY-T/EU | Everlight Electronics Co Ltd | LED Chip Pure White 30mA 2Pin SMD TR (Alt: S10C012467) RoHS : Compliant | 6,000 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| BZT55C18-GS08 | Vishay Intertechnologies | (Alt: BZT55C18-GS08) RoHS : Compliant | 2,500 | |||
| BZX584C18-G3-08 | Vishay Intertechnologies | (Alt: BZX584C18-G3-08) RoHS : Compliant | 0 | |||
| BZX384B18-G3-18 | Vishay Intertechnologies | ZENER DIODE SOD323 (Alt: BZX384B18-G3-18) RoHS : Compliant | 0 | |||
| 19-218/GHC-YR1S2M/3T | Everlight Electronics Co Ltd | LED Single Chip Green 535nm 25mA 2Pin 0603 TR (Alt: 35GH0198CD) RoHS : Compliant | 0 | |||
| BXEN-18G-11M-3C-00-0-5 | Bridgelux Inc | LED SMD 2835 mid power (Alt: BXEN-18G-11M-3C-00-0-5) RoHS : Compliant | 0 | |||
| SST25PF040CT-40E/SN18GVAO | Microchip Technology Inc | 23V TO 36V 4MB SPI FLASH (Alt: SST25PF040CT-40E/SN18GVAO) RoHS : Compliant | 0 | |||
| BXCP-18G-11M-K24-3-B1-00-0-3 | Bridgelux Inc | CSP 2424 KSeries (Alt: BXCP-18G-11M-K24-3-B1-00-0-3) RoHS : Compliant | 0 | |||
 FDH Electronics | RDC8P-18-GSSI | Connector Technology Inc | Other Products | 284 | ||
| J1128 18GA GXL BLACK | Wire | Hook-Up Wire | 50 | |||
| 660-009B18G3.5-06 | Glenair Inc | Backshells & Ac | 2 | |||
| R071618G11SN-200 | Cinch Connectivity Solutions | Intro Placehldr | 1 | |||
| LC1D18G7 | QPL MANUFACTURER | Miscellaneous |
| 1 | ||
| 660-008B18G5-05 | Glenair Inc | Connector | 0 | |||
| 450AS001N18G | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 661-001ZN18G4-01 | Glenair Inc | Connector | 0 | |||
| 450ES002LF18G | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 660-009NF18G6-21 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| R58HB18G49W012A | Cooper Interconnect | Backshells & Ac | 0 | |||
| 660-008NF18G9-02 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 450AA001B18G | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 10-40792-18G112 | Glenair Inc | Connector Acc | 0 | |||
| R58HB18G49A216D | Cooper Interconnect | Connector Acc |
| 0 | ||
 Flip Electronics | SS9018GBU | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,570 | |
NCP1117DT18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,950 | ||
| 2N4918G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| SI5344D-D10218-GM | Skyworks Solutions Inc | Stock | 865 | |||
| SI5344A-D10218-GM | Skyworks Solutions Inc | Stock, Ship Today RoHS : Compliant |
| 865 | ||
| R9A07G044L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 664 | |||
| R9A07G054L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 493 | |||
NCP5663DS18G | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
 Maritex | 78L18G-AB3-R | Unisonic Technologies Co Ltd | LDO Regulators; 78L18G-AB3-R; UTC RoHS : Compliant |
| 3,315 | |
| MC34018G-S28-R | Unisonic Technologies Co Ltd | Multimedia Amplifiers; MC34018G-S28-R; UTC |
| 985 | ||
| ST-18G-L50-OO-TR | Sun Rise Exact | Jack socket; female; stereo; 2.5 mm; witch switching contact; SMD |
| 681 | ||
| UN1518G-AE3-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); UN1518G-AE3-R; UTC RoHS : Compliant |
| 500 | ||
| ZXMP10A18GTA | Diodes Incorporated | MOSFETs; ZXMP10A18GTA; DIODES; 2.6 A; 150 m?; -100 V; 3.9 W RoHS : Compliant |
| 299 | ||
| P2118-GR-LN | BEISIT | Cable gland PG21; nylon; PG21 13-18mm; grey; flat O-ring; with lock-nut |
| 100 | ||
| M2518-G-LN | BEISIT | Cabe gland M25; nylon; M25x1.5 13-16mm; flat O-ring; with lock nut; grey |
| 98 | ||
 Master Electronics | TSW-103-18-G-T | Samtec Inc | RoHS : Compliant |
| 0 | |
| TSW-112-18-G-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-112-18-G-T | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-133-18-G-T-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-136-18-G-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips 0.100 pitch RoHS : Compliant |
| 0 | ||
| TSW-137-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-145-18-G-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TSW-146-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 18G2717 | Hammond Manufacturing | galvanized panel for 30X20 enclosure RoHS : Compliant |
| 0 | ||
| MCV-1-5/18-G-3-5 | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - number of positions: 18 - pitch: 3.5 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.4 mm RoHS : Compliant |
| 0 | ||
| SL-118-G-32 | Samtec Inc | Headers & Wire Housings .100 Low Profile Single Row Screw Machine Socket Strip RoHS : Compliant |
| 0 | ||
| BBL-118-G-F | Samtec Inc | .100 Low Profile Single Row Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| CW160808-R18G | Bourns Inc | Magnetics-High Q Chip Inductor /Tape & Reel - 7 Reel |Bourns CW160808-R18G RoHS : Compliant |
| 0 | ||
| MCDN-1-5/18-G1-3-5-P26THR | Phoenix Contact | PCB headers - nominal current: 8 A - rated voltage (III/2): 160 V - nominal cross section: 1.5 mm² - number of positions: 18 - pitch: 3.5 mm - color: black - contact surface: Tin - mounting: THR soldering - pin layout: Linear pinning - solder pin [P]: 2.6 mm - The pin length is 2.6 mm. User information and design recommendations on Through Hole Reflow Technology can be found at: Downloads RoHS : Compliant |
| 0 | ||
| BCP-381F-18-GY | Phoenix Contact | Plug component Nominal current: 8 A Rated voltage (III/2): 160 V Number of positions: 18 Pitch: 3.81 mm Connection method: Screw connection with tension sleeve Color: signal grey Contact surface: Tin RoHS : Compliant |
| 0 | ||
 Neutron USA | NEB12-18GM50-E2-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, Cylindrical, 12mm, DC, PNP-NO, M12 4-Pin, 18mm |
| 50 | |
| 4870-18G | MG Chemicals | Solder 22AWG .032IN DIA POCKET PACK (0.6OZ) |
| 50 | ||
| 4880-18G | MG Chemicals | Solder, 22 AWG, 0.032 DIA, SN63/PB37, 0.6 OZ; Pocket Pak Solder |
| 50 | ||
| NJ5-18GM50-E2-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, Cylindrical, Flush, NJ5 Series |
| 18 | ||
| NJ5-18GK-N | PEPPERL + FUCHS AUTOMATION | Proximity Sensor, M18, NAMUR, 5mm Range, 2 Wire, 2 Meter Cable, PVC |
| 9 | ||
| NJ5-18GM50-E-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Sensor, M18 Barrel, R: 5mm Flush, DC NPN NO, M12 Conn |
| 4 | ||
| UB1000-18GM75A-I-V15 | PEPPERL + FUCHS AUTOMATION | Sensor, Ultrasonic, 204541 |
| 3 | ||
| NJ5-18GM50-E2 | PEPPERL + FUCHS AUTOMATION | Sensor Proximity Inductive Dc 083992 |
| 3 | ||
| NBB8-18GM30-E3-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, m18 Barrel, R: 8mm flush, 1350 Hz DC 3wire PNP NC, M12 Conn |
| 1 | ||
| NBB5-18GM50-E3-V1 | PEPPERL + FUCHS AUTOMATION | Inductive DC |
| 1 | ||
| NBB5-18GM60-WO-V12 | PEPPERL + FUCHS AUTOMATION | ProXimity Sensor, AC, 131307 |
| 0 | ||
| NCN8-18GM40-N0-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Prox Sensor, M18 Barrel, R: 8mm non-flush, DC Namur NC, M12 Conn |
| 0 | ||
| NJ1.5-18GM-N-D | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, M18 Barrel, R: 1.5mm flush, 2wire 8.2V, NAMUR, NC, 2m cable, PVC, 106342 |
| 0 | ||
| NJ5-18GM-N 5M | PEPPERL + FUCHS AUTOMATION | Inductive Proximity Sensor, M18 Barrel, R: 5mm flush, 2wire 8.2V NAMUR NC, 5m PVC cable |
| 0 | ||
| NJ8-18GK-SN | PEPPERL + FUCHS AUTOMATION | ProXimity Sensor,M18, 8mm Range, 2 Wire, NAMUR, 2m Cable, 106662 |
| 0 | ||
 Pasternack Enterprises US | PE3C8818/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax. | 471 | ||
| PE3C8818/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax. | 306 | |||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-12 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-36 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-72 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax. |
| 53 | ||
| PE3C8818/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C8818/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-120 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax. |
| 31 | ||
| PE3C8818/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-300 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax. |
| 12 | ||
 Venkel Ltd. | WRFI0603-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | ||
| WRFI0805-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0805;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI1008-S-R18GT | VENKEL LTD | Wirewound RF Inductor;1008;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-R18GT-13 | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | |||
 Vyrian | 74LVC1G18GW | Nexperia | Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 12,019 | ||
| MAX8887EZK18-G24 | Analog Devices (Maxim Integrated) | 10,718 | ||||
| HTSW-125-18-G-D | Samtec Inc | Board Connector, 50 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal RoHS : Compliant | 10,142 | |||
| MAX5318GUG+T | Analog Devices Inc | D/A Converter, 1 Func, Serial Input Loading, 3us Settling Time, PDSO24 RoHS : Compliant | 9,343 | |||
| DS26518GN+ | Analog Devices Inc | Framer, PBGA256 RoHS : Compliant | 8,413 | |||
BQ2011SN-D118G4 | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 8,345 | |||
TPS3818G125DRVT | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO6 | 7,345 | |||
| 74LVC1G18GV | Nexperia | Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 6,415 | |||
| MAX8887EZK18-G05 | Analog Devices (Maxim Integrated) | 6,311 | ||||
SMP-18GBC | Analog Devices Inc | Sample and Hold Circuit, 8 Func, Sample, CMOS RoHS : Compliant | 5,910 | |||
| MT58LC128K18G1LG-6 | Micron Technology Inc | Cache SRAM, 128KX18, 3.5ns, CMOS, PQFP100 RoHS : Not Compliant | 4,079 | |||
| BBL-118-G-F | Samtec Inc | Board Stacking Connector, 18 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator RoHS : Compliant | 4,026 | |||
MT18GTF25672FDY-667XX | Micron Technology Inc | Synchronous DRAM Module, 256MX72, CMOS RoHS : Compliant | 3,409 | |||
| 73M2918-GTR | Texas Instruments | Microcontroller, 8-Bit, 33MHz, CMOS, PQFP100 | 3,299 | |||
| KTS8021/8G | Kingston Technology Company | 2,324 | ||||
 Waytek, Inc. | TFFN 18GA YELLOW | Unified Wire and Cable Inc | 18GA Yellow TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 14,000 | |
| TFFN 18GA BLACK | Unified Wire and Cable Inc | 18GA Black TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 5,500 | ||
| TFFN 18GA BLUE | Unified Wire and Cable Inc | 18GA Blue TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 4,000 | ||
| TFFN 18GA BROWN | Unified Wire and Cable Inc | 18GA Brown TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 3,500 | ||
 Win Source Electronics | RT9193-18GB | Richtek Technology Corp | IC REG LDO 1.8V 0.3A SOT23-5 RoHS : Compliant |
| 135,000 | |
| MP3318GC-Z | Monolithic Power Systems | IC LED DRV RGLTR PWM 12WLCSP RoHS : Compliant |
| 102,000 | ||
| TZMC18-GS08 18V | Vishay Huntington |
| 89,248 | |||
| RT9013-18GB | Richtek Technology Corp | IC REG LDO 1.8V 0.5A SOT23-5 RoHS : Compliant |
| 71,684 | ||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 470 OHM 0603 1LN RoHS : Compliant |
| 44,000 | ||
| MC34118G-S28-R | United Technologies Corporation | 5.5mA SOP-28-300mil Audio Amplifiers RoHS |
| 24,279 | ||
| AP1117E18G-13-ZT | Diodes Incorporated | IC REG LINEAR 1.8V 1A SOT223-3 |
| 20,000 | ||
| ZXMP10A18GTA | Diodes Incorporated | MOSFET P-CH 100V 2.6A SOT223 RoHS : Compliant |
| 20,000 | ||
| ZMY18-GS08 | Vishay Huntington | DIODE ZENER 18V 1W DO213AB |
| 13,085 | ||
| TZMB18-GS08 | Vishay Huntington | DIODE ZENER 18V 500MW SOD80 |
| 12,500 | ||
| RT9118GQW | Richtek Technology Corp | IC AMP CLASS D STEREO 10W 28WQFN / Amplifier IC 2-Channel (Stereo) Class D 28-WQFN (4x5) RoHS : Compliant |
| 8,439 | ||
| 74LVC1G18GV | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 6,746 | ||
| TZMC18-GS08 | Vishay Huntington | DIODE ZENER 18V 500MW SOD80 |
| 5,000 | ||
| 74LVC1G18GW | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 4,176 | ||
| M21218G-42 | MACOM | IC VIDEO CABLE DRIVER 8SOIC / Video Driver IC Serial DVB-ASI, SMPTE 8-SOIC Package RoHS : Compliant |
| 97 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand