| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
18G-S16-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% - Tape and Reel (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 32,000 | |
74LVC1G18GW,125![]() | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 - Tape and Reel (Alt: 74LVC1G18GW,125) RoHS : Compliant |
| 27,000 | ||
1N5818G![]() | onsemi | 1.0 A, 30 V, Schottky Rectifier - Bulk (Alt: 1N5818G) RoHS : Compliant |
| 15,000 | ||
| LQW18ANR18G8ZD | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: LQW18ANR18G8ZD) RoHS : Compliant |
| 8,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF - Tape and Reel (Alt: TZMC18-GS08) RoHS : Compliant |
| 7,500 | ||
ZXMP10A18GTA![]() | Diodes Incorporated | Trans MOSFET P-CH 100V 3.7A 4-Pin(3+Tab) SOT-223 T/R - Tape and Reel (Alt: ZXMP10A18GTA) RoHS : Compliant |
| 3,000 | ||
| TSW-108-18-G-S | Samtec Inc | - Bulk (Alt: TSW-108-18-G-S) RoHS : Compliant |
| 300 | ||
| SCMR18G604SRBB0 | Kyocera AVX Components | - Bulk (Alt: SCMR18G604SRBB0) RoHS : Compliant |
| 230 | ||
| TSW-112-18-G-D | Samtec Inc | - Bulk (Alt: TSW-112-18-G-D) RoHS : Compliant |
| 152 | ||
| EPC7018GC | EPC Space LLC | 100V 90A - Bulk (Alt: EPC7018GC) RoHS : Not Compliant |
| 32 | ||
| ELB-2018/GV17SDR16UYWB/S | Everlight Electronics Co Ltd | - Bulk (Alt: ELB-2018/GV17SDR16UYWB/S) RoHS : Compliant | 20 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR - Boxed Product (Development Kits) (Alt: EK-U1-VCU118-G) RoHS : Not Compliant |
| 1 | ||
| NB1-CASS-18G-12RP-TT36 | Omega Engineering | - Bulk (Alt: NB1-CASS-18G-12RP-TT36) RoHS : Not Compliant |
| 0 | ||
| NB1-ICSS-18G-12-TBSL | Omega Engineering | - Bulk (Alt: NB1-ICSS-18G-12-TBSL) RoHS : Not Compliant |
| 0 | ||
| NB2-CPSS-18G-12 | Omega Engineering | - Bulk (Alt: NB2-CPSS-18G-12) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 2211R-18G-SM-CR | SPC Multicomp | Conn, Header, 18Pos, R/A, 1Row, 2.54Mm; |Multicomp Pro 2211R-18G-SM-CR RoHS : Compliant |
| 4,800 | |
| STS31A18GSMTR | TE Connectivity | Tactile Switch, 0.05A, 24V, 180Gf; |Te Connectivity Alcoswitch STS31A18GSMTR RoHS : Compliant |
| 2,220 | ||
| STS31A18GSMTR | TE Connectivity | Tactile Switch, 0.05A, 24V, 180Gf; |Te Connectivity Alcoswitch STS31A18GSMTR RoHS : Compliant |
| 2,220 | ||
| TSW-202-18-G-S | Samtec Inc | Header, 5.08Mm, Tht Vert, 2Way; |Samtec, Inc. TSW-202-18-G-S RoHS : Compliant |
| 1,239 | ||
| TSW-107-18-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 7Way; |Samtec, Inc. TSW-107-18-G-S RoHS : Compliant |
| 902 | ||
| STS31A18GSMTR | TE Connectivity | Tactile Switch, 0.05A, 24V, 180Gf; |Te Connectivity Alcoswitch STS31A18GSMTR RoHS : Compliant |
| 750 | ||
| STS31A18GSMTR | TE Connectivity | Tactile Switch, 0.05A, 24V, 180Gf; |Te Connectivity Alcoswitch STS31A18GSMTR RoHS : Compliant |
| 750 | ||
1N5818G![]() | onsemi | Schottky Rect, 1A, 30V, Axial; |Onsemi 1N5818G RoHS : Compliant |
| 543 | ||
| TSW-121-18-G-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 21Way; |Samtec, Inc. TSW-121-18-G-S RoHS : Compliant |
| 275 | ||
| TD-118-G-A | Samtec Inc | Header, 2.54Mm, Dual, 36Way; |Samtec, Inc. TD-118-G-A RoHS : Compliant |
| 168 | ||
| TSW-124-18-G-T | Samtec Inc | Header, 2.54Mm, Tht Vert, 72Way; |Samtec, Inc. TSW-124-18-G-T RoHS : Compliant |
| 135 | ||
| 18G2121 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G2121 RoHS : Compliant |
| 59 | ||
| 18G1717 | Hammond Manufacturing | Encl Accessory, Inner Panel; |Hammond 18G1717 RoHS : Compliant |
| 20 | ||
| 18G3317 | Hammond Manufacturing | Galv Panel For Wallmt 36X20; |Hammond 18G3317 RoHS : Compliant |
| 5 | ||
1N5818G![]() | onsemi | Schottky Rectifier, 1A, 30V, Axial; Repetitive Peak Reverse Voltage:30V; Average Forward Current:1A; Diode Configuration:Single; Diode Case Style:Do-41; No. Of Pins:2Pins; Forward Voltage Max:550Mv; Forward Surge Current:25A Rohs Compliant: Yes RoHS : Compliant |
| 2 | ||
![]() Analog Devices Inc | MAX5318GUG+T | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 7,500 | |
| MAX5318GUG+ | Analog Devices Inc | 18-bit Voltage Output SPI DAC RoHS : Compliant |
| 3,834 | ||
| DS26518GN+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 143 | ||
| MAX8860EUA18+G65 | Analog Devices Inc | Low-Dropout, 300mA Linear Regu RoHS : Compliant | 0 | |||
| DS26518GNB1+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 0 | ||
![]() RS | NEB12-18GM50-E2-V1 (231731) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR, CYLINDRICAL, 12MM, DC, PNP-NO, M12 4-PIN, 18MM |
| 76 | |
| NBB8-18GM50-E2-V1 (85501) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, M18 X 1, 10 TO 30 VDC, 15 MA (MAX.), SHIELDED, 800 HZ |
| 50 | ||
| NJ8-18GM50-E2-V1 (84485) | PEPPERL+FUCHS GmbH | INDUCTIVE PROXIMITY SENSOR CYLINDRICAL DC NON-FLUSH |
| 30 | ||
| NBB8-18GM50-E0 (86144) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR CYLINDRICAL SENSING DISTANCE 8MM |
| 18 | ||
| UB500-18GM75-U-V15 (133055) | PEPPERL+FUCHS GmbH | ULTRASONIC PROXIMITY SENSOR,18 MM, CYLINDRICAL, DIFFUSE,0.03-0.5M, ANALOG, M12 5-PIN |
| 5 | ||
| NJ5-18GK-SN (250929) | PEPPERL+FUCHS GmbH | SENSOR, PROXIMITY, M18 INDUCTIVE, 5MM RANGE, 8VDC, NAMUR, 2M CABLE, 250929 |
| 4 | ||
| UB300-18GM40A-E5-V1 (220351) | PEPPERL+FUCHS GmbH | SENSOR ULTRASONIC 220351 |
| 4 | ||
| NCN8-18GM40-N0 5M | PEPPERL+FUCHS GmbH | INDUCTIVE NAMUR |
| 2 | ||
| NJ8-18GM-N (106470) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, NAMUR |
| 2 | ||
| NCB5-18GM40-N0 (181108) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR,18MM, 5MM RANGE, NAMUR, 2 METER, PVC, 181108 |
| 2 | ||
| UDC-18GMA-400-3E3 (235851) | PEPPERL+FUCHS GmbH | SENSOR, ULTRASONIC, 235851 |
| 2 | ||
| NMB10-18GM65-Z4-V1 (912736) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, DC, 912736 |
| 2 | ||
| UB1000-18GM75-I-V15 (204535) | PEPPERL+FUCHS GmbH | ULTRASONIC PROXIMITY SENSOR,18 MM, CYLINDRICAL, DIFFUSE,0.07-1M, ANALOG, M12 5-PIN |
| 2 | ||
| NJ8-18GK-N-150 (106466) | PEPPERL+FUCHS GmbH | PROXIMITY SENSOR, NAMUR |
| 1 | ||
| UGB-18GM50-255-2E3 (193008) | PEPPERL+FUCHS GmbH | SENSOR, ULTRASONIC, 193008 |
| 1 | ||
![]() Microchip Technology Inc | SST25PF040CT-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 3,300 | |
| SST25PF040C-40V/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-18 RoHS : Compliant |
| 400 | ||
| SST25PF040C-40I/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2046-06-23 RoHS : Compliant |
| 100 | ||
| SST25PF040C-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 90 | ||
| TPG100018-G3 | Microchip Technology Inc | Softlog ICP2LAN(G3) 1-Channel Galvanic Isolated In-Circuit Programmer, Projected EOL: |
| 23 | ||
| ZL50018GAG2 | Microchip Technology Inc | Pb Free 2K + rate conversion and S3 DPLL, BGA, Projected EOL: 2027-09-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| ZL50118GAG2 | Microchip Technology Inc | Pb Free 1 TDM + 2 ETHERNET, BGA, Projected EOL: 2028-01-23 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40I/W18GCPG | Microchip Technology Inc | Industrial-8' Probed No Ink with Map in a jar for CPG, WAFER, Projected EOL: 2046-07-10 - Contact for Pricing RoHS : Compliant | 0 | |||
| SST25PF040C-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040C-40V/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2045-10-18 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4Mbit SPI FLASH 125C Automotive, WSON, Projected EOL: 2046-04-05 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40E/SN18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, SOIC, Projected EOL: 2045-10-08 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/MF18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, WSON, Projected EOL: 2046-06-23 RoHS : Compliant |
| 0 | ||
| SST25PF040CT-40I/NP18GVAO | Microchip Technology Inc | 2.3V TO 3.6V 4MB SPI FLASH, UDFN, Projected EOL: 2046-03-13 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | ESI-000547-05-11-8-GPB | O-RINGS | 433 | |||
| 3/8-16X1 1/8 G5 ZC | HEX HEAD CAP SCREWS | 240 | ||||
| 3/8-16X1 1/8 G8 Z2 | HEX HEAD CAP SCREWS | 100 | ||||
| M39024/10-18G | Staffall | 78 | ||||
| 2663818G001 | Superior Washer & Gasket Company | 35 | ||||
| BACS18G30B3 | MISC. SPACERS/STANDOFFS/HANDLES | 3 | ||||
| KHXL-18G-RSC-18 | Omega Engineering | RoHS : Compliant | 1 | |||
| H2G018GA | Gowanda Electronics Corporation | 1 | ||||
| FHL18G1-1 | Eaton Bussmann | 1 | ||||
![]() Rochester Electronics | 74AUP1G18GM,115![]() | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant |
| 220,000 | |
74AUP1G18GF,132![]() | NXP Semiconductors | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, XSON6 RoHS : Compliant |
| 59,300 | ||
74LVC1G18GV,125![]() | Nexperia | Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant |
| 180,807 | ||
74AUP1G18GM,115![]() | Nexperia | Multiplexer And Demux/Decoder, AUP/ULP/V Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant |
| 185,000 | ||
NCP3218GMNR2G![]() | onsemi | NCP3218 - 7-Bit, Programmable, 3-Phase, Mobile CPU Synchronous Buck Controller RoHS : Compliant |
| 6,985 | ||
2N4918G![]() | onsemi | 1.0 A, 40 V PNP Bipolar Power Transistor RoHS : Compliant |
| 50,274 | ||
TMS320C6418GTSA500![]() | Texas Instruments | Digital Signal Processor Fixed Point Host Interface, I²C, McASP, McBSP 500MHz 288-BGA Tray RoHS : Not Compliant |
| 26 | ||
TPS3818G25DRVT![]() | Texas Instruments | Supervisory Circuit 2.33V 6-SON T/R RoHS : Compliant |
| 12,800 | ||
| SS9018GBU | Fairchild Semiconductor Corporation | NPN Epitaxial Silicon Transistor RoHS : Compliant |
| 130,381 | ||
| MAX9718GEBL+G45 | Maxim Integrated Products | Audio Amplifier, 0.475W, 1 Channel(s), 1 Func, BICMOS, PBGA9 RoHS : Compliant |
| 1,266 | ||
MAX9718GEBL+TG45![]() | Maxim Integrated Products | Audio Amplifier, 1.4W, 1 Channel(s), 1 Func, BICMOS, PBGA9 RoHS : Compliant |
| 520,000 | ||
| UPA2718GR-E1-AT | NEC Electronics Group | Power Field-Effect Transistor, P-Channel MOSFET |
| 5,000 | ||
| RAA228218GNP#HA0 | Renesas Electronics Corporation | RAA228218 - Digital Single Output, 20-Phase PWM Controller with Adaptive Voltage Scaling Bus (AVSBus) RoHS : Compliant |
| 24,000 | ||
| UPA2718GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, P-Channel MOSFET RoHS : Compliant |
| 2,500 | ||
UPD70F3718GC-8EA-A![]() | Renesas Electronics Corporation | RISC Microcontroller, 32-Bit, FLASH, V850 CPU, 20MHz, CMOS, PQFP100 RoHS : Compliant |
| 51,398 | ||
![]() Sager | TSW-107-18-G-S | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 902 | |
| TD-118-G-A | Samtec Inc | Headers & Wire Housings .100 Double Row Screw Machine Terminal Strip RoHS : Compliant |
| 168 | ||
| T1M-18-GF-DH | Samtec Inc | Headers & Wire Housings Discrete Wire Terminal Strip, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| HTS-118-G-AA | Samtec Inc | Headers & Wire Housings .100 High-Temp Single Row Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-124-18-G-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-125-18-G-D-LL | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-216-18-G-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| RNF-100-1/8-GN-SP | TE Connectivity | Heat Shrink Tubing & Sleeves HS-TBG 1/8 GN PRICE PER METER RoHS : Compliant | 0 | |||
| APH-0718-G-H | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HLS-1918-G-3 | Samtec Inc | IC & Component Sockets RoHS : Compliant | 0 | |||
| HLT-1518-G-T | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TS-118-G-N | Samtec Inc | Headers & Wire Housings .100 Single Row Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| TSW-103-18-G-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TSW-111-18-G-D | Samtec Inc | Headers & Wire Housings Classic PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
| TSW-112-18-G-Q | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() TME | AISC-0603-R18G-T | Abracon Corporation | Inductor: wire; SMD; 180nH; ±2%; 1.8x1.12x1.02mm; 1.38Ω; -40÷125°C RoHS : Compliant |
| 21,000 | |
| 10159684-18GLF | Amphenol Corporation | Connector: wire-board; female; PIN: 18; 12A; straight; crimped; 3mm |
| 4,190 | ||
| 1015 18 G | OBO BETTERMANN GmbH & Co KG | Screw mounted clamp; Øbundle : 18mm; Ømount.hole: 6mm; W: 14mm |
| 80 | ||
| CAB PC 302018 G3B | FIBOX | Enclosure: wall mounting; X: 200mm; Y: 300mm; Z: 180mm; CAB; grey |
| 1 | ||
| 0034.3118.G | Schurter Electronic Components | Fuse: fuse; 5.2x20mm; cylindrical,glass; 1.25A; 250VAC; time-lag RoHS : Compliant |
| 0 | ||
1N5818G![]() | onsemi | Diode: Schottky rectifying; THT; 30V; 1A; CASE59; Ufmax: 0.875V RoHS : Compliant |
| 0 | ||
| 19-218/GHC-YQ1R2QY/3T | Everlight Electronics Co Ltd | LED; green; SMD; 0603; 72mcd; 120°; 5mA; 518nm; Lens: transparent RoHS : Compliant |
| 0 | ||
| 6718 GR001 | Alpha Wire | Wire; EcoWire®; EcoGen®,HookUp Wire; stranded; Cu; 12AWG; MPPE |
| 0 | ||
| CAB PC 304018 G3B | FIBOX | Enclosure: wall mounting; X: 300mm; Y: 400mm; Z: 180mm; CAB; grey |
| 0 | ||
| BZX84C18-G3-18 | Vishay Intertechnologies | Diode: Zener; 0.5W; 18V; SMD; SOT23; single diode; BZX84C RoHS : Compliant |
| 0 | ||
| CAB PC 403018 G | FIBOX | Enclosure: wall mounting; X: 300mm; Y: 400mm; Z: 180mm; CAB; grey |
| 0 | ||
| BLM2SMD18G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; PIN: 18; SMT; 1.5A; 125V; 2x9 |
| 0 | ||
| NBB8-18GM60-A2 | PEPPERL+FUCHS GmbH | Sensor: inductive; OUT: PNP / NO + NC; 0÷8mm; 10÷30VDC; M18; 2m |
| 0 | ||
| PC 1919 18 G-2FSH | FIBOX | Enclosure: multipurpose; X: 188mm; Y: 188mm; Z: 180mm; with hinges |
| 0 | ||
| PC 5638 18 G | FIBOX | Enclosure: multipurpose; X: 378mm; Y: 558mm; Z: 180mm; SOLID; grey |
| 0 | ||
![]() ComSIT USA | RNF10018GNSP | TE Connectivity | AVAILABLE EU | 4,415 | ||
![]() ComSIT USA | TZMC18GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 90,000 | ||
| BZT55C18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.41%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 20,000 | |||
| TZMB18GS08 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 2%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 17,790 | |||
| BZT52C18GS18 | v | SMALL SIGNAL ZENER DIODE Zener Diode, 18V V(Z), 6.6%, 0.5W, Silicon, Unidirectional RoHS : Compliant | 10,000 | |||
| CCONSMAFSTEL18G | Adolf Wuerth Gmbh & Co Kg | Electronic Component RoHS : Compliant | 7,500 | |||
1N5818G![]() | onsemi | AXIAL LEAD RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 1A, 30V V(RRM), Silicon, DO-41 RoHS : Compliant | 5,000 | |||
| 49SMLB10000018GGCET | Pericom Semiconductor Corporation | HC-49, LOW PROFILE, SMD MINIATURE QUARTZ CRYSTAL Series - Fundamental Quartz Crystal, 10MHz Nom RoHS : Compliant | 3,000 | |||
74LVC1G18GW![]() | NXP Semiconductors | 1-OF-2 NON-INVERTING DEMULTIPLEXER WITH 3-STATE DESELECTED OUTPUT Multiplexer And Demux/Decoder, LVC/LCX/Z Series, 1-Func, 1 Line Input, 2 Line Output, True Output, CMOS, PDSO6 RoHS : Compliant | 2,435 | |||
| UPD78C18GQA40836 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 535 | |||
2N4918G![]() | onsemi | MEDIUM-POWER PLASTIC PNP SILICON TRANSISTOR Power Bipolar Transistor, 3A I(C), 40V V(BR)CEO, 1-Element, PNP, Silicon, TO-225AA, Plastic/Epoxy, 3 Pin RoHS : Compliant | 500 | |||
| 49S03579518GHCE | Saronix | Electronic Component RoHS : Compliant | 400 | |||
| MC78M18G | onsemi | 500 MILLIAMP POSITIVE VOLTAGE REGULATOR Fixed Positive Standard Regulator, 18VBIPolar, PSFM3 RoHS : Compliant | 55 | |||
| TDA4918G | Siemens | 0.5 A SWITCHING CONTROLLER Switching Controller, Current-mode, 0.5A, 150kHz Switching Freq-Max, BIPolar, PDSO20 RoHS : Not Compliant | 32 | |||
| UPD75518GF3B9 | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 29 | |||
| LC71N18GC3D | Nortel Networks | Electronic Component RoHS : Not Compliant | 27 | |||
![]() Interstate Connecting Components | RNF-100-1/8-GN-SP | TE Connectivity | NB19254001 RNF-100-1/8-GN-SP RoHS : Compliant |
| 75 | |
| 8ST0C18G35SN | SOURIAU-SUNBANK | J5903 | 0 | |||
| M85049/140-18GC | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Compliant |
| 0 | ||
| MS3416-18GA | Glenair Inc | ACCESSORIES - E NUT | 0 | |||
| 10-37253-18G3 | Glenair Inc | 0 | ||||
| 10-40793-1-18G112 | Glenair Inc | 0 | ||||
| CN0966B18G11PN-000 | Cinch Connectivity Solutions | 26500 PLUG 10#16 1#2 PIN | 0 | |||
| CN0966B18G31PNY040 | Cinch Connectivity Solutions | 26500 PLUG 31#20 PIN | 0 | |||
| CN0967C18G11P8-000 | Cinch Connectivity Solutions | 26500 WALL MT 10#16 1#2 PIN | 0 | |||
| CN0967C18G31P8Y040 | Cinch Connectivity Solutions | 26500 WALL MT 31#20 PIN | 0 | |||
| CN1020A18G08P9-000 | Cinch Connectivity Solutions | 26500 PLUG 8#12 PIN | 0 | |||
| CN1020A18G14PN-000 | Cinch Connectivity Solutions | 26500 PLUG 14#16 PIN | 0 | |||
| 8ST5-18G32PN | SOURIAU-SUNBANK | 8ST SERIES RFI PLUG OG CAD RoHS : Not Compliant | 0 | |||
| SMS18GE51M8 | SOURIAU-SUNBANK | 0 | ||||
| 660-009NF18G6-21 | Glenair Inc | PROTECTIVE COVER RoHS : Not Compliant |
| 0 | ||
![]() NexGen Digital | C3CCS-1018G-ND | CW Industries | 10 | |||
RT9080-18GJ5![]() | Richtek Technology Corp | RoHS : Compliant | 6 | |||
![]() PEI Genesis | CN0966B18G14PN-000 | Cinch Connectivity Solutions |
| 214 | ||
| CN1021A18G08S7-240 | Cinch Connectivity Solutions |
| 208 | |||
| CN0966B18G11PN-000 | Cinch Connectivity Solutions |
| 44 | |||
| CN1020A18G14PN-000 | Cinch Connectivity Solutions |
| 33 | |||
| CN1020A18G31S6-200 | Cinch Connectivity Solutions |
| 32 | |||
| CN0967C18G11P9-040 | Cinch Connectivity Solutions |
| 32 | |||
| CN0966B18G31PNY040 | Cinch Connectivity Solutions |
| 20 | |||
| MS3416-18GA | SOURIAU-SUNBANK |
| 0 | |||
| CN0942B18G31P829 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G11P8-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN0967C18G31P8Y040 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A18G08P9-000 | Cinch Connectivity Solutions |
| 0 | |||
| CN1020A18G11S6-240 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G08P10-040 | Cinch Connectivity Solutions |
| 0 | |||
| CN0966B18G08P9-000 | Cinch Connectivity Solutions |
| 0 | |||
![]() Powell Electronics | HTSW-102-18-G-D | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 1,630 | |
| RNF-100-1/8-GN-SP | TE Connectivity | RNF HS TUBE-100-1/8-GN-SP RoHS : Compliant |
| 891 | ||
| TSW-202-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 818 | ||
| TSW-107-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 595 | ||
| TSW-203-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 553 | ||
| HTSW-112-18-G-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 305 | ||
| HTSW-114-18-G-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 229 | ||
| TSW-109-18-G-S-LL | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 198 | ||
| TSW-121-18-G-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 182 | ||
| TD-118-G-A | Samtec Inc | .100 Double Row Screw Mach Terminal Str RoHS : Compliant |
| 111 | ||
| TSW-124-18-G-T | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 89 | ||
| 18G1717 | Hammond Manufacturing | GALV PANEL FOR WALLMT 20X20 |
| 24 | ||
| M85049/140-18GC | Glenair Inc | SHRINK BOOTS - SHAPE MEMORY PRODUCTS RoHS : Compliant |
| 20 | ||
| 18G3317 | Hammond Manufacturing | Panel 27 x 27 - Fits Encl. 36 x 20 - Gal |
| 3 | ||
| FW1018G01 | CII Guardian | MIL/AERO RELAY FW1018G01 |
| 1 | ||
![]() PUI | 1N5818-G | 10,000 | ||||
| ACZRT55C18-G | 6,000 | |||||
| 2012-1X18G00S/083/045R/I2 | 4,258 | |||||
| 2011-2X18G00RB | 2,000 | |||||
| 2141-2X18G00SA | 1,282 | |||||
| 2044-2X18G00SA | 1,106 | |||||
| 2011-2X18G01RB | 921 | |||||
| 2143-A2X18G00DNU-S | 842 | |||||
| 2011-2X18G01SB | 684 | |||||
| 2115-2X18G00DN-4B | 600 | |||||
| 2011-1X18G00SB | 333 | |||||
| 2012-1X18G00S/8.3/4.5/RB | 300 | |||||
| 2011-1X18G00LB | 200 | |||||
| 2538-B18G00DBT | 200 | |||||
![]() Richardson RFPD | PS-5G18G-400-A-SFF | Quantic PMI | PHASE SHIFTER |
| 4 | |
| LCWC0603JR18GTAR | Kyocera AVX Components | RF CHIP INDUCTOR RoHS : Compliant | 0 | |||
| 18GL-00M | Spectrum Control | Attenuator 18GHz 0dB RoHS : Compliant | 0 | |||
1N5818G![]() | onsemi | Rectifier Diode Schottky Si 30V 1A 2-Pin DO-41 Bag RoHS : Compliant | 0 | |||
| 118GBB1R0C100TT | Kyocera AVX Components | Single LayerCeramicCapacitor RoHS : Compliant | 0 | |||
| 18GL-02M | Spectrum Control | Attenuator 18GHz 2dB RoHS : Compliant | 0 | |||
| LM-10M18G-16-20W-AL-ROHS | Quantic PMI | LM-10M2D5G-100CW-1KWP-SFF-TH RoHS : Not Compliant | 0 | |||
| SMAMSH-9F18GD-SMAMSH-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| SI5341A-D13818-GMR | Skyworks Solutions Inc | Fractional Synthesizer Technology Clock Generators RoHS : Compliant | 0 | |||
| SI5341D-D09218-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5345B-D12018-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| 18GL-03F | Spectrum Control | Attenuator 18GHz 3dB RoHS : Compliant | 0 | |||
| 18GL-06M | Spectrum Control | Attenuator 18GHz 6dB RoHS : Compliant | 0 | |||
| SI51210-B08918-GM | Skyworks Solutions Inc | Clock Generator 3MHz to 165MHz-IN 170MHz-OUT 6-Pin RoHS : Compliant | 0 | |||
| SI5335D-B08418-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
![]() Rutronik | LQW18ANR18G0ZD | Murata Manufacturing Co Ltd | LQW18A 180nH 140mA 2% WWT RoHS : Compliant |
| 108,000 | |
| TZMB18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 100,000 | ||
| TZMC18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 90,000 | ||
| TZMC18-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 5% MINIMELF RoHS : Compliant |
| 40,000 | ||
| TZMB18-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 18V 2% MINIMELF RoHS : Compliant |
| 10,000 | ||
| ZMY18-GS18 | Vishay Intertechnologies | Z-DIODE 1,0W 18V 5% MELF RoHS : Compliant |
| 5,000 | ||
![]() Chip 1 Exchange | MC34118G-S28-T | INSTOCK | 33,363 | |||
| 49SMLB11.0592-18GGC | Pericom Semiconductor Corporation | INSTOCK | 23,500 | |||
| 49SMLB11.0592-18GGC | PERE | INSTOCK | 18,500 | |||
| 1N5818G | Comchip Technology Corporation Ltd | INSTOCK | 10,000 | |||
| MC34118G-S28-R | INSTOCK | 9,743 | ||||
| SF18G-AP | INSTOCK | 6,500 | ||||
| ACZRT55C18-G | Comchip Technology Corporation Ltd | INSTOCK RoHS : Compliant | 6,000 | |||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 5,028 | |||
| BZT55C18-GS08 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 2,123 | |||
| ZMY18-GS08 | INSTOCK | 1,930 | ||||
| TZMC18-GS08 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 1,245 | |||
| 49SMLB20.0000-18GGC-E | INSTOCK | 950 | ||||
| SMS18GE6 | SOU | INSTOCK | 62 | |||
| TDA4918G | Siemens | INSTOCK | 60 | |||
| MSTBV-2,5/18-G-5,08 | INSTOCK | 40 | ||||
![]() Avnet Abacus | BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0603 1608 Metric 470 ohm 200 mA EMIFIL BLM18GG Series 1 ohm 25 (Alt: BLM18GG471SN1D) RoHS : Compliant | 84,000 | ||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 12,000 | |||
| XP9T18GH | YAGEO Corporation | MOS N 20V 14MOHM TO252 (Alt: XP9T18GH) RoHS : Compliant | 0 | |||
| HZZ00118-G | Bel Fuse | (Alt: HZZ00118-G) RoHS : Compliant | 0 | |||
| PKU4418G PI | Flex Ltd | Isolated Through Hole DCDC Converter Industrial ITE 21 45 W 1 Output Adj Fixed 18 V (Alt: PKU4418GPI) RoHS : Compliant | 0 | |||
| 0034.3118.G | Schurter Electronic Components | (Alt: 0034.3118.G) RoHS : Compliant | 0 | |||
| TSW-111-18-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 22 Contacts Through Hole TSW Series (Alt: TSW-111-18-G-D) RoHS : Compliant | 0 | |||
| LQW18ANR18G8ZD | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G8ZD) RoHS : Compliant | 0 | |||
| LQW18ASR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ASR18G00D) RoHS : Compliant | 0 | |||
| LQW2BASR18G00L | Murata Manufacturing Co Ltd | (Alt: LQW2BASR18G00L) RoHS : Compliant | 0 | |||
| LQW15AWR18G80D | Murata Manufacturing Co Ltd | (Alt: LQW15AWR18G80D) RoHS : Compliant | 0 | |||
| 10-40792-18G117 | Glenair Inc | Crimp Pin size 8 12mm2 AWG 1814 Gold Plated (Alt: 10-40792-18G117) RoHS : Compliant | 0 | |||
| SCMR18G604SRBB0 | Kyocera AVX Components | (Alt: SCMR18G604SRBB0) RoHS : Compliant | 0 | |||
| HTSW-109-18-G-D | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 254 mm 2 Rows 18 Contacts Through Hole HTSW Series (Alt: HTSW-109-18-G-D) RoHS : Compliant | 0 | |||
| M55342K06B18G0RWB | Vishay Intertechnologies | SMD Chip Resistor 18 ohm 2 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B18G0RWB) RoHS : Not Compliant | 0 | |||
![]() Avnet Asia | SCMR18G604SRBB0 | Kyocera AVX Components | (Alt: SCMR18G604SRBB0) RoHS : Compliant | 0 | ||
| LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-2V3V-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO | ams OSRAM Group | OOSLA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S- (Alt: LA G6SP.01-VHVI-1-1+8G6H-24-G3R3-B-S-KO) RoHS : Compliant | 0 | |||
| SF18G | Taiwan Semiconductor | Diode Super Fast Recovery Rectifier 600V 1A 2-Pin DO-204AL T/R (Alt: SF18G) RoHS : Compliant | 0 | |||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0603 [1608 Metric], 470 ohm, 200 mA, EMIFIL BLM18GG Series, 1 ohm, ? 25% (Alt: BLM18GG471SN1D) RoHS : Compliant |
| 0 | ||
| TSW-108-18-G-D | Samtec Inc | (Alt: TSW-108-18-G-D) RoHS : Compliant | 0 | |||
74LVC1G18GW,125![]() | Nexperia | Demultiplexer, Non Inverting, LVC Family, 1 Channels, 1:2, 1.65 V to 5.5 V, SC-88-6 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 0 | |||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 0 | |||
74LVC1G18GW-Q100H![]() | Nexperia | 1-to-2 Line Demultiplexer, 74LVC, 1 Channel, 1:2, 1.65 V to 5.5 V, 6 Pins, SC-88 (Alt: 74LVC1G18GW-Q100H) RoHS : Compliant | 0 | |||
| KS DELPS1.22-UHVH-7-H3L4-20-R18-GA | ams OSRAM Group | OOSKS DELPS1.22-UHVH-7-H3L4-20-R18-GA Q6 (Alt: KS DELPS1.22-UHVH-7-H3L4-20-R18-GA) RoHS : Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| EK-U1-VCU118-G | AMD | Evaluation Kit, Virtex UltraScale+ FPGA, GTY Transceiver Evaluation, Vivado, NCNR (Alt: EK-U1-VCU118-G) RoHS : Not Compliant | 0 | |||
| 8020.5018.G | Schurter Electronic Components | (Alt: 8020.5018.G) RoHS : Compliant | 0 | |||
| LQW18ANR18G00D | Murata Manufacturing Co Ltd | (Alt: LQW18ANR18G00D) RoHS : Compliant | 0 | |||
| KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA | ams OSRAM Group | OOSKW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA (Alt: KW DELSS2.RA-BXBZ-LL0-2686-20-R18-GA) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 74LVC1G18GW,125![]() | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC886 (Alt: 74LVC1G18GW,125) RoHS : Compliant | 21,000 | ||
74LVC1G18GV,125![]() | Nexperia | Demultiplexer Non Inverting LVC Family 1 Channels 12 165 V to 55 V SC745 (Alt: 74LVC1G18GV,125) RoHS : Compliant | 12,000 | |||
74AUP1G18GW,125![]() | Nexperia | 1to2 Line Demultiplexer 74AUP 1 Channel 12 800 mV to 36 V 6 Pins TSSOP (Alt: 74AUP1G18GW,125) RoHS : Compliant | 12,000 | |||
1N5818G![]() | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818G) RoHS : Compliant | 7,000 | |||
| MP2918GL-Z | Monolithic Power Systems | (Alt: MP2918GL-Z) RoHS : Compliant | 0 | |||
| MP2918GF-Z | Monolithic Power Systems | (Alt: MP2918GF-Z) RoHS : Compliant | 0 | |||
| MP1918GQE-Z | Monolithic Power Systems | (Alt: MP1918GQE-Z) RoHS : Compliant | 0 | |||
| MP5418GQG-Z | Monolithic Power Systems | (Alt: MP5418GQG-Z) RoHS : Compliant | 0 | |||
| MPQ2918GF-Z | Monolithic Power Systems | (Alt: MPQ2918GF-Z) RoHS : Compliant | 0 | |||
GS4288S18GL-33![]() | GSI Technology | DRAM Chip LLDRAM 288MBit 16Mx18 18V 144Pin UBGA (Alt: GS4288S18GL-33) RoHS : Compliant | 0 | |||
GS8128418GB-167![]() | GSI Technology | SRAM Chip Sync Dual 25V33V 144MBit 8M x 18 8ns34ns 119Pin FBGA Tray (Alt: GS8128418GB-167) RoHS : Compliant | 0 | |||
| MPQ2918GL-AEC1-Z | Monolithic Power Systems | (Alt: MPQ2918GL-AEC1-Z) RoHS : Compliant | 0 | |||
| GS8256418GD-250I | GSI Technology | (Alt: GS8256418GD-250I) RoHS : Compliant | 0 | |||
| GS82564Z18GB-200I | GSI Technology | (Alt: GS82564Z18GB-200I) RoHS : Compliant | 0 | |||
| IS31FL3218-GRLS2-TR | Lumissil Microsystems | 18 constant current channels each with independent PWM control and designed for driving LEDs (Alt: IS31FL3218-GRLS2-TR) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AISC-0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-1008-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0805-R018G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0805-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-1206-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q0603-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603HP-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| SI5395B-A10118-GM | Skyworks Solutions Inc | Single PLL jitter attenuator with xtal: 12-outputs up to 350 MHz; integer+fractional RoHS : Compliant |
| 0 | ||
| 1003-CM18-GLB | Digi International Inc | 1003-CM18 Plug-in Cell Modem; CAT 18 |
| 0 | ||
| AISC-1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R18G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | AP1117E18G-13![]() | Diodes Incorporated | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,375 | |
| SEL-1818GBZB | IN STOCK SHIP TODAY |
| 371 | |||
| 39D118G030GP6 | Vishay Sprague | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 212 | ||
| GM1203PFV1-8GN | SUNON USA | IN STOCK SHIP TODAY |
| 90 | ||
| 39D218G010FP6 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 68 | ||
| EPB5218G | PCA Electronics Inc | IN STOCK SHIP TODAY | 48 | |||
| BDL-118-G-E | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 35 | ||
| NT2K18GH-03 | Nortel Networks | IN STOCK SHIP TODAY |
| 20 | ||
| NBB5-18GM40-Z0 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 9 | ||
| NT2K18GH-35 | Nortel Networks | IN STOCK SHIP TODAY | 6 | |||
| 617-H018GAJ103 | Amphenol Corporation | IN STOCK SHIP TODAY | 6 | |||
| GM1235PFV1-8.GN | SUNON USA | IN STOCK SHIP TODAY |
| 4 | ||
RT9018B-18GSP![]() | Richtek Technology Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| NJ5-18GM50-E2 | PEPPERL+FUCHS GmbH | IN STOCK SHIP TODAY |
| 1 | ||
| NT2K18GH-93 | Nortel Networks | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | HHC1/4-20X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 5,502 | |
| HHC1/2-20X1-1/8-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 864 | ||
| HHC3/8-16X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 256 | ||
| HHC5/16-18X1-1/8-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 74 | ||
| HXN1-8-GR8-STL | HEX NUT | Hex Nut |
| 10 | ||
| 0131218G100 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| CHC-18/GB | Sugatsune Kogyo Co Ltd | CABLE GROMMET | 0 | |||
| NB08PT-18-GB1832 | Avdel | NB08PT-18 TOOL GB | 0 | |||
| M6018GCK-SM | Heyco | SSMCG 1-1/2 NPT 9-8.9MM W/9807 | 0 | |||
| HK-DF-18G | Sugatsune Kogyo Co Ltd | HOOK FOR GLASS | 0 | |||
| 0131218G050 | Essentra Components | SET SCREW, SLOTTED HEAD, 516-1 | 0 | |||
| M6018GDG-SM | Heyco | SSMCG 1-1/2 NPT 6-10.3MM W/980 | 0 | |||
| RKW-12-18-GN | Essentra Components | CABLE TIE, HOOK LOOP, GREEN | 0 | |||
| CHC-S18GC | Sugatsune Kogyo Co Ltd | SPLIT CABLE GROMMET | 0 | |||
| M6018GBQ-SM | Heyco | SSMCG 1-1/2 NPT 21-5.5MMW/9807 | 0 | |||
![]() EBV Elektronik | TZMC18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 MINIMELF (Alt: TZMC18-GS08) RoHS : Compliant | 1,062,500 | ||
| TZMB18-GS08 | Vishay Intertechnologies | (Alt: TZMB18-GS08) RoHS : Compliant | 177,500 | |||
| DZ23C18-G3-08 | Vishay Intertechnologies | (Alt: DZ23C18-G3-08) RoHS : Compliant | 12,000 | |||
| BXCP-18G-11L-K13-3-A1-00-0-3 | Bridgelux Inc | CSP 1313 KSeries (Alt: BXCP-18G-11L-K13-3-A1-00-0-3) RoHS : Compliant | 12,000 | |||
| BZT55B18-GS08 | Vishay Intertechnologies | ZENER DIODE SOD80 QUADROMELF (Alt: BZT55B18-GS08) RoHS : Compliant | 10,000 | |||
| ZMY18-GS08 | Vishay Intertechnologies | (Alt: ZMY18-GS08) RoHS : Compliant | 9,000 | |||
| 99-218GLM2C/L7277SGY-T/EU | Everlight Electronics Co Ltd | LED Chip Pure White 30mA 2Pin SMD TR (Alt: S10C012467) RoHS : Compliant | 6,000 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| BZT55C18-GS08 | Vishay Intertechnologies | (Alt: BZT55C18-GS08) RoHS : Compliant | 2,500 | |||
1N5818G![]() | onsemi | 10 A 30 V Schottky Rectifier (Alt: 1N5818G) RoHS : Compliant | 0 | |||
| BZT55C18-GS18 | Vishay Intertechnologies | (Alt: BZT55C18-GS18) RoHS : Compliant | 0 | |||
| BZT52B18-G3-08 | Vishay Intertechnologies | (Alt: BZT52B18-G3-08) RoHS : Compliant | 0 | |||
| BZX584C18-G3-08 | Vishay Intertechnologies | (Alt: BZX584C18-G3-08) RoHS : Compliant | 0 | |||
| BXEN-18G-11M-3C-00-0-5 | Bridgelux Inc | LED SMD 2835 mid power (Alt: BXEN-18G-11M-3C-00-0-5) RoHS : Compliant | 0 | |||
| BXCP-18G-11M-K24-3-B1-00-0-3 | Bridgelux Inc | CSP 2424 KSeries (Alt: BXCP-18G-11M-K24-3-B1-00-0-3) RoHS : Compliant | 0 | |||
![]() FDH Electronics | M83413/8-A018GG | Circuit Systems Company Inc | Power Cable Ass | 143 | ||
| 10-405966-18G | Amphenol Aerospace | Connector 38999 |
| 64 | ||
| J1128 18GA GXL BLACK | Wire | Hook-Up Wire | 50 | |||
| R58HB18G49A010A | SOURIAU-SUNBANK | Backshells & Ac | 10 | |||
| R58HB18G45Y018C | Cooper Interconnect | Connector Acc | 8 | |||
| R58HB18G38W042D | Cooper Interconnect | Connector Acc |
| 7 | ||
| LC1D18G7 | QPL MANUFACTURER | Miscellaneous |
| 1 | ||
| R58HB18G51W012D | Cooper Interconnect | Connector Acc |
| 1 | ||
| 660-009NF18G6-21 | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| FW1018G01 | TE Connectivity | Relays | 0 | |||
| 450AA001B18G | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| B2 1/8 GREEN SPL | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 0 | |||
| R58HB18G49A010A | Cooper Interconnect | Backshells & Ac | 0 | |||
| 660-004B18G5-05 | Glenair Inc | Connector | 0 | |||
| 660-005B18G4.5-01 | Glenair Inc | Connector | 0 | |||
![]() Flip Electronics | SS9018GBU | onsemi | Stock, Ship Today RoHS : Compliant |
| 9,570 | |
NCP1117DT18G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,950 | ||
2N4918G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,000 | ||
| SI5344A-D10218-GM | Skyworks Solutions Inc | Stock, Ship Today RoHS : Compliant |
| 865 | ||
| SI5344D-D10218-GM | Skyworks Solutions Inc | Stock | 865 | |||
| R9A07G044L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 664 | |||
| R9A07G054L18GBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 493 | |||
NCP5663DS18G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 297 | ||
![]() Maritex | 78L18G-AB3-R![]() | Unisonic Technologies Co Ltd | LDO Regulators; 78L18G-AB3-R; UTC RoHS : Compliant |
| 3,315 | |
| MC34018G-S28-R | Unisonic Technologies Co Ltd | Multimedia Amplifiers; MC34018G-S28-R; UTC |
| 985 | ||
| ST-18G-L50-OO-TR | Sun Rise Exact | Jack socket; female; stereo; 2.5 mm; witch switching contact; SMD |
| 681 | ||
| UN1518G-AE3-R | Unisonic Technologies Co Ltd | Bipolar Transistors (BJT); UN1518G-AE3-R; UTC RoHS : Compliant |
| 500 | ||
ZXMP10A18GTA![]() | Diodes Incorporated | MOSFETs; ZXMP10A18GTA; DIODES; 2.6 A; 150 m?; -100 V; 3.9 W RoHS : Compliant |
| 299 | ||
| P2118-GR-LN | BEISIT | Cable gland PG21; nylon; PG21 13-18mm; grey; flat O-ring; with lock-nut |
| 100 | ||
| M2518-G-LN | BEISIT | Cabe gland M25; nylon; M25x1.5 13-16mm; flat O-ring; with lock nut; grey |
| 98 | ||
![]() Master Electronics | T1M-18-GF-DH | Samtec Inc | DISCRETE WIRE TERMINAL ST RoHS : Compliant |
| 0 | |
| TD-118-G-A | Samtec Inc | .100 Double Row Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| IDMD-18-T-08.00-T-P18-G-S0 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTS-118-G-AA | Samtec Inc | .100 High-Temp Single Row Screw Machine Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-113-18-G-D-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-124-18-G-D | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-125-18-G-D-LL | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-125-18-G-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-128-18-G-Q-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-133-18-G-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-134-18-G-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-143-18-G-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-216-18-G-T | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| SD-118-G-21B-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RNF-100-1/8-GN-SP | TE Connectivity | Heat Shrink Tubing ST Polyolefin Green Single Spool RoHS : Compliant |
| 0 | ||
![]() Neutron USA | NCB1.5-18GM60-E2-D-V1 | PEPPERL + FUCHS AUTOMATION | Inductive Sensor, R: 1.5mm, 15 M18 Flush, 3wire PNP-NO, 10-60VDC, M12 Conn |
| 6 | |
| NBB8-18GM60-US-V12 | PEPPERL + FUCHS AUTOMATION | Inductive Prox Sensor, M18 Barrel, R: 8 mm Flush, 2 Wire AC/DC NO, 1/2"-20UN Conn |
| 3 | ||
| NCB8-18GM50-Z4 | PEPPERL + FUCHS AUTOMATION | Sensor, Proximity, M18 Inductive, 8mm Range, 3.5-30VDC, 2m, PVC, 105930 |
| 3 | ||
| XCKP2518G11 | Telemechanique Sensors | Limit Switches LIMIT SWITCH 240VAC 3A XCKP |
| 2 | ||
| TFFN 18G/ST BLACK | Olympic Wire & Cable Corp | Hook-Up Wire; 18 AWG; Stranded BC; PVCIns |
| 2 | ||
| UB500-18GM75-E4-V15 | PEPPERL + FUCHS AUTOMATION | Pepperl+Fuchs Factory Automation UB500-18GM75-E4-V15 Cylindrical sensor, M18, NPN, o/p, 500mm, 133052 |
| 2 | ||
| NCB1.5-18GM60-E2-D | PEPPERL + FUCHS AUTOMATION | ProXimity Sensor,M18 Inductive, 1.5mm Range, 10-60VDC, PNP, 2m, PVC, 088006 |
| 1 | ||
| UGB-18GM50-255-2E3 | PEPPERL + FUCHS AUTOMATION | Sensor, Ultrasonic, 193008 |
| 1 | ||
| IQH1-18GM-V1 | PEPPERL + FUCHS AUTOMATION | Passive RFID Sensor, 18mm, 13.56MHz, IP67, IQH1 Series |
| 1 | ||
| NBB5-18GM60-A0-300MM-4PKD | PEPPERL + FUCHS AUTOMATION | Inductive ProX Sensor, M18 Barrel,DC, R: 5mm flush, DC NPN NO/NC, cable, 911350, Price per item |
| 0 | ||
| NCB5-18GM40-N0 5M | PEPPERL + FUCHS AUTOMATION | ProXimity Sensor,18mm, 5mm Range, NAMUR, 5 Meter, PVC, 181138 |
| 0 | ||
| UB1000-18GM75-E4-V15 | PEPPERL + FUCHS AUTOMATION | Pepperl+Fuchs Factory Automation UB1000-18GM75-E4-V15 Sensor, Ultrasonic, 204529 |
| 0 | ||
| OBT500-18GM60-E4-V1 | PEPPERL + FUCHS AUTOMATION | Triangulation Optical Sensor 0.394" ~ 11.811" (10mm ~ 300mm) NPN - Light-ON |
| 0 | ||
| NMB10-18GM55-E2 | PEPPERL + FUCHS AUTOMATION | Proximity Sensor, CYLINDRICAL, METAL FACE, PILE DRIVER, SENSING DIS |
| 0 | ||
| NMB5-18GM65-Z0-FE-V1 | PEPPERL + FUCHS AUTOMATION | Proximity Sensor,M18 Inductive, 5mm Range, 6-30VDC, 2 Wire, NO, M12, 094312 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8818/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GR coax. | 471 | ||
| PE3C8818/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-GY coax. | 257 | |||
| PE3C8818/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-12, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-12 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-36, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-36 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-GY coax. |
| 105 | ||
| PE3C8818/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 105 | ||
| PE3C8818/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GR-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 51 | ||
| PE3C8818/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-72 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-GY coax. |
| 26 | ||
| PE3C8818/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-120 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-GY coax. |
| 15 | ||
| PE3C8818/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GY, RF Cable Type: Belden 1694A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/GY-300, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/GY-300 is built with Belden 1694A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-GY coax. |
| 6 | ||
![]() Venkel Ltd. | WRFI1008-S-R18GT | VENKEL LTD | Wirewound RF Inductor;1008;180nH;�2% RoHS : Not Compliant | 0 | ||
| WRFI0603-S-R18GT-13 | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0603-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0603;180nH;�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-R18GT | VENKEL LTD | Wirewound RF Inductor;0805;180nH;�2% RoHS : Not Compliant | 0 | |||
![]() Vyrian | AP1115AY18G-13 | Diodes Incorporated | Fixed Positive LDO Regulator, 1.8V, 1.3V Dropout, BIPolar, PSSO3 | 14,580 | ||
| MPQ2918GL-AEC1-Z | Monolithic Power Systems | Switching Controller, Current-mode, 1000kHz Switching Freq-Max RoHS : Compliant | 12,516 | |||
| HTSW-125-18-G-D-LL | Samtec Inc | Board Connector, 50 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal RoHS : Compliant | 10,414 | |||
BQ2011SN-D118G4![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 8,345 | |||
| MAX5318GUG | Analog Devices (Maxim Integrated) | 7,924 | ||||
| KTH-PL421/8G | Kingston Technology Company | 7,037 | ||||
MT58LC64K18G1LG-7TR![]() | Micron Technology Inc | Standard SRAM, 64KX18, 4.5ns, CMOS, PQFP100 RoHS : Not Compliant | 6,648 | |||
| MAX8887EZK18-G05 | Analog Devices (Maxim Integrated) | 6,311 | ||||
| SST25PF040C-40V/SN18GVAO | Microchip Technology Inc | Flash, 512KX8, PDSO8 RoHS : Compliant | 6,030 | |||
MT58LC128K18G1LG-5![]() | Micron Technology Inc | Standard SRAM, 128KX18, 3.5ns, CMOS, PQFP100 RoHS : Not Compliant | 5,811 | |||
TPS3818G09DRVT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO6 | 5,266 | |||
TPS3818G30DRVR![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 1 Channel, PDSO6 | 5,148 | |||
MT58LC64K18G1LG-8.5TR![]() | Micron Technology Inc | Standard SRAM, 64KX18, 5ns, CMOS, PQFP100 RoHS : Not Compliant | 5,003 | |||
MT18GTF25672FY-667E1D4![]() | Micron Technology Inc | Synchronous DRAM Module, 256MX72, CMOS RoHS : Compliant | 3,831 | |||
TMS320C6418GTSA500![]() | Texas Instruments | Digital Signal Processor, 32-Bit Size, 32-Ext Bit, 30MHz, CMOS, PBGA288 RoHS : Not Compliant | 3,312 | |||
![]() Waytek, Inc. | TFFN 18GA YELLOW | Unified Wire and Cable Inc | 18GA Yellow TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 14,000 | |
| TFFN 18GA BLACK | Unified Wire and Cable Inc | 18GA Black TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 5,500 | ||
| TFFN 18GA BLUE | Unified Wire and Cable Inc | 18GA Blue TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 4,000 | ||
| TFFN 18GA BROWN | Unified Wire and Cable Inc | 18GA Brown TFFN/TEWN Wire Bare Copper 600V, 1000V DISC WAY |
| 3,500 | ||
![]() Win Source Electronics | RT9193-18GB | Richtek Technology Corp | IC REG LDO 1.8V 0.3A SOT23-5 RoHS : Compliant |
| 135,000 | |
| TZMC18-GS08 18V | Vishay Huntington |
| 89,248 | |||
| RT9013-18GB | Richtek Technology Corp | IC REG LDO 1.8V 0.5A SOT23-5 RoHS : Compliant |
| 71,684 | ||
| BLM18GG471SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 470 OHM 0603 1LN RoHS : Compliant |
| 44,000 | ||
RT9018B-18GSP![]() | Richtek Technology Corp | IC REG LDO 1.8V/ADJ 3A 8SOP RoHS : Compliant |
| 38,689 | ||
| MC34118G-S28-R | United Technologies Corporation | 5.5mA SOP-28-300mil Audio Amplifiers RoHS |
| 24,279 | ||
ZXMP10A18GTA![]() | Diodes Incorporated | MOSFET P-CH 100V 2.6A SOT223 RoHS : Compliant |
| 20,000 | ||
| AP1117E18G-13-ZT | Diodes Incorporated | IC REG LINEAR 1.8V 1A SOT223-3 |
| 20,000 | ||
| ZMY18-GS08 | Vishay Huntington | DIODE ZENER 18V 1W DO213AB |
| 13,085 | ||
| TZMB18-GS08 | Vishay Huntington | DIODE ZENER 18V 500MW SOD80 |
| 12,500 | ||
| IS31FL3218-GRLS2 | Lumissil Microsystems | IC LED DRVR LIN I2C 38MA 24SOP / LED Driver IC 18 Output Linear I²C Dimming 38mA 24-SOP RoHS : Compliant |
| 12,000 | ||
| RT9118GQW | Richtek Technology Corp | IC AMP CLASS D STEREO 10W 28WQFN / Amplifier IC 2-Channel (Stereo) Class D 28-WQFN (4x5) RoHS : Compliant |
| 8,439 | ||
| TZMC18-GS08 | Vishay Huntington | DIODE ZENER 18V 500MW SOD80 |
| 5,000 | ||
| 74LVC1G18GW | Nexperia | 1-of-2 non-inverting demultiplexer with 3-state deselected output RoHS : Compliant |
| 4,176 | ||
| M21218G-42 | MACOM | IC VIDEO CABLE DRIVER 8SOIC / Video Driver IC Serial DVB-ASI, SMPTE 8-SOIC Package RoHS : Compliant |
| 97 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |