| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1786-S08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 1217861-1 | TE Connectivity | PCB Terminal, 6.35mm x 0.81mm, 0.25" x 0.032"", Brass, 1.4 mm, Tin, FASTON 250" - Tape and Reel (Alt: 1217861-1) RoHS : Compliant |
| 260,000 | |
| 1517860000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header M 8 POS 5.08mm Solder ST Thru-Hole Box - Bulk (Alt: 1517860000) RoHS : Compliant | 0 | |||
| 1426178-6 | TE Connectivity | - Bulk (Alt: 1426178-6) RoHS : Not Compliant | 0 | |||
| 11-31-7861 | Molex | AM60506A136 CENTER TERMFTATION BLADE - Bulk (Alt: 0011317861) RoHS : Not Compliant |
| 0 | ||
| 501786-4080 | Molex | FFC / FPC Board Connector, 40 Contacts, 0.5 mm, Tin-Bismuth, Copper Alloy, Surface Mount, Straight - Tape and Reel (Alt: 5017864080) RoHS : Compliant |
| 0 | ||
| A-1PA-178-600N2 | Amphenol Corporation | RF / Coaxial Cable Assembly, 23.6 ", 600 mm, RG178, AMC Right Angle Plug, AMC Right Angle Plug" - Bulk (Alt: A-1PA-178-600N2) RoHS : Compliant |
| 0 | ||
| CT317-8661-007 | ITT Interconnect Solutions | - Bulk (Alt: CT317-8661-007) RoHS : Not Compliant | 0 | |||
| CT317-8666-002 | ITT Interconnect Solutions | Contact Holder Tip for Sure Seal Hand Insertion Tool - Bulk (Alt: CT317-8666-002) RoHS : Not Compliant |
| 0 | ||
| 1786420000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 8 POS 7.62mm Solder RA Thru-Hole 30A Box - Bulk (Alt: 1786420000) RoHS : Compliant | 0 | |||
| 1786790000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1786790000) RoHS : Compliant |
| 0 | ||
| 2151786-1 | TE Connectivity | - Bag (Alt: 2151786-1) RoHS : Not Compliant |
| 0 | ||
| 1786280000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block 11 POS 6.35mm Solder ST Thru-Hole 30A Box - Bulk (Alt: 1786280000) RoHS : Compliant | 0 | |||
| 217-8659-240 | ITT Interconnect Solutions | - Bulk (Alt: 217-8659-240) RoHS : Not Compliant |
| 0 | ||
| 217-8681-100 | ITT Interconnect Solutions | - Bulk (Alt: 217-8681-100) RoHS : Not Compliant |
| 0 | ||
| 2617860000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2617860000) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 1217861-1 | TE Connectivity | Terminal, Tab, 6.35Mm X 0.81Mm, Solder; Tab Size - Metric:6.35Mm X 0.81Mm; Tab Size - Imperial:0.25" X 0.032"; Terminal Material:Brass; Mounting Hole Dia:1.4Mm; Terminal Plating:Tin; Product Range:-; Connector Type:Quick Connect Tab Rohs Compliant: Yes RoHS : Compliant |
| 60,564 | |
| 501786-5090 | Molex | Conn, Ffc, 50Pos, 1Row, 0.5Mm; |Molex 501786-5090 RoHS : Compliant |
| 1,864 | ||
| 281786-4 | TE Connectivity | Socket Idt, 1Row, 4Way; |Te Connectivity Amp 281786-4 RoHS : Compliant |
| 1,500 | ||
| 501786-5091 | Molex | Conn, Ffc, 50Pos, 1Row, 0.5Mm; |Molex 501786-5091 RoHS : Compliant |
| 900 | ||
| 1786190 | Phoenix Contact | Terminal Block, Pluggable, 4Pos, 12Awg; |Phoenix Contact 1786190 RoHS : Compliant |
| 771 | ||
| 501786-5091 | Molex | Conn, Ffc, 50Pos, 1Row, 0.5Mm; |Molex 501786-5091 RoHS : Compliant |
| 762 | ||
| 1786853 | Phoenix Contact | Terminal Block, Header, 4Pos, Th; |Phoenix Contact 1786853 RoHS : Compliant |
| 204 | ||
| 178.6152.0001 | Littelfuse Inc | Blade Fuse Holder, 1Pos, 30A, 80V; Fuse Holder Type:Automotive Blade Fuse Holder; Fuse Current:30A; Fuse Size Held:Ato; Holder Terminals:Crimp; No. Of Fuses:1Fuses; Product Range:Ato Fkh Series; Voltage Rating Vac:80V Rohs Compliant: Yes RoHS : Compliant |
| 202 | ||
| 281786-5 | TE Connectivity | Socket Idt, 1Row, 5Way; |Te Connectivity Amp 281786-5 RoHS : Compliant |
| 153 | ||
| 1786840 | Phoenix Contact | Terminal Block, Header, 3Pos, Th; |Phoenix Contact 1786840 RoHS : Compliant |
| 150 | ||
| MC001786 | SPC Multicomp | Surge Protector Adaptor, N Plug-Jack; |Multicomp Pro MC001786 RoHS : Compliant |
| 92 | ||
| 1786433 | Phoenix Contact | Terminal Block, Socket, R/A, 5Way, Th; |Phoenix Contact 1786433 RoHS : Compliant |
| 79 | ||
| 1786271 | Phoenix Contact | Terminal Block, Pluggable, 12Pos, 12Awg; |Phoenix Contact 1786271 RoHS : Compliant |
| 64 | ||
| 5-104178-6 | TE Connectivity | Board-Board Connector, Header, 10 Position, 1Row; Connector Systems:Board-To-Board; Pitch Spacing:1.27Mm; No. Of Rows:1Rows; No. Of Contacts:10Contacts; Contact Termination Type:Through Hole Straight; Connector Shroud:Unshrouded Rohs Compliant: Yes RoHS : Compliant |
| 38 | ||
| 117I-117865 | Metropolitan Vaccuum Cleaner (METRO) | Vacuum Cleaner, 220Vac, 500 W, 2.75 Lb; |Metrovac 117I-117865 RoHS : Not Compliant |
| 9 | ||
![]() Analog Devices Inc | LT1786FCS#PBF | Analog Devices Inc | SMBus Progmable CCFL Sw Reg RoHS : Compliant |
| 4,860 | |
| DC1786A | Analog Devices Inc | LTC2871 RS232/RS485 Multiproto |
| 32 | ||
| LT1786FCS#TRPBF | Analog Devices Inc | SMBus Progmable CCFL Sw Reg RoHS : Compliant |
| 0 | ||
![]() RS | 19300160466 (7417868) | HARTING Technology Group | CONNECTOR POWER HEAVY DUTY METAL HOOD HAN 16B 2 LEVERS, HAN B SERIES |
| 392 | |
| VAB1SW0B-AZW00-0 (RCV-00017864|VAB1SW0B-AZW00-0|VAB1SW0BAZW000) | Carling Technologies | ROCKER SWITCH, DPST, ON-NONE-OFF, ILLUMINATED, SQUARE BLUE LENS,15A,.250"QC |
| 200 | ||
| 1786187 (IC 2 5/ 3-ST-5 08) | Phoenix Contact | PCB PLUG SCREW 5.08MM 12AWG 320V 12A 3 POSITION COMBICON IC SERIES |
| 127 | ||
| 1786255 (IC 2 5/10-ST-5 08) | Phoenix Contact | PCB PLUG SCREW 5.08MM 12AWG 320V 12A 10 POSITION COMBICON IC SERIES |
| 53 | ||
| 1786394 (IC 2 5/24-ST-5 08) | Phoenix Contact | PCB PLUG SCREW 5.08MM 12AWG 320V 12A 24 POSITION COMBICON CONTROL SERIES |
| 50 | ||
| 1786239 (IC 2 5/ 8-ST-5 08) | Phoenix Contact | PCB PLUG SCREW 5.08MM 12AWG 320V 12A 8 POSITION COMBICON IC SERIES |
| 43 | ||
| 501786 | RS Pro | GROUP MARKER DIN RAIL TERMINAL |
| 39 | ||
| 1786307 (IC 2 5/15-ST-5 08) | Phoenix Contact | PCB PLUG SCREW 5.08MM 12AWG 320V 12A 15 POSITION COMBICON IC SERIES |
| 30 | ||
| 178.6165.0002 (4107672) | Littelfuse Inc | FLR PCB MOUNT AUTOMOTIVE FUSEHOLDER, 30A, 80V |
| 20 | ||
| FN2640-20-103-C11 (821786) | TE Connectivity | EMC/EMI FILTER, IEC INLET, 250 VAC, PUSH-IN, 20A, FN2640 SERIES |
| 20 | ||
| 1786048 (ICV 2 5/12-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 12 POSITION COMBICON ICV SERIES |
| 12 | ||
| 1SNA178646R1100 (017864611) | TE Connectivity | EXAD WIRE EXTRACTOR; ENTRELEC |
| 5 | ||
| 32X42X7TC-BX (0075021786) | Dichtomatik | OIL SEAL, 32MM ID, 42MM OD, 7MM WIDTH, N701R MATERIAL |
| 3 | ||
| 2217867 | RS Pro | RETRACTABLE CONE TOP SAFETY BARRIER, YELLOW AND BLACK TAPE, 9.8FT (3M) |
| 1 | ||
| 1786 | Adafruit Industries | 12 CHEMICAL ETAPE LIQUID LEVEL SENSOR WITH TEFLON JACKET |
| 0 | ||
![]() Microchip Technology Inc | PIC16F1786-I/SP![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp,, SPDIP, Projected EOL: 2041-02-18 RoHS : Compliant |
| 41,755 | |
PIC16F1786-E/ML![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2041-02-18 RoHS : Compliant |
| 32,879 | ||
PIC16LF1786-I/SS![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SSOP, Projected EOL: 2041-02-15 RoHS : Compliant |
| 18,490 | ||
PIC16LF1786-I/SO![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SOIC, Projected EOL: 2041-02-15 RoHS : Compliant |
| 2,228 | ||
PIC16F1786-I/ML![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2041-02-18 RoHS : Compliant |
| 976 | ||
PIC16F1786-E/SS![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SSOP, Projected EOL: 2041-02-18 RoHS : Compliant |
| 24 | ||
PIC16LF1786-I/ML![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2041-02-15 RoHS : Compliant |
| 5 | ||
PIC16F1786-I/SS![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SSOP, Projected EOL: 2041-02-18 RoHS : Compliant |
| 4 | ||
PIC16F1786-E/SP![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp,, SPDIP, Projected EOL: 2041-02-18 RoHS : Compliant |
| 0 | ||
PIC16F1786-I/SO![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SOIC, Projected EOL: 2041-02-18 RoHS : Compliant |
| 0 | ||
PIC16LF1786-I/SP![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp,, SPDIP, Projected EOL: 2041-02-15 RoHS : Compliant |
| 0 | ||
PIC16LF1786T-I/SS![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, SSOP, Projected EOL: 2041-02-18 RoHS : Compliant |
| 0 | ||
PIC16LF1786T-I/ML![]() | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2041-02-18 RoHS : Compliant |
| 0 | ||
| PIC16F1786-E/MLVAO | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2040-11-26 RoHS : Compliant |
| 0 | ||
| PIC16F1786-I/MLVAO | Microchip Technology Inc | 14KB Flash, 1KB RAM, 256B EEPROM, 12-bit ADC, 8-bit DAC, PSMC, OPAmp, VQFN, Projected EOL: 2041-01-13 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | 1117863 | Unbrako Group | 600 | |||
| 5714-178-63 | Seastrom Mfg | 212 | ||||
| 5602-178-62 | Seastrom Mfg | 211 | ||||
| 5712-178-60 | Seastrom Mfg | 100 | ||||
| NAS1786A06-36 | NAS Miscellaneous | 90 | ||||
| NAS1786B04-06 | NAS Miscellaneous | 19 | ||||
| 7717-86-DAPG | MISCELLANEOUS | 16 | ||||
| NAS1786B3-10 | NAS Miscellaneous | 15 | ||||
| NAS1786C06-16 | NAS Miscellaneous | 15 | ||||
| NAS1786-4-24 | NAS SPACERS/STANDOFFS/HANDLES | 15 | ||||
| NAS1786A04-22 | NAS Miscellaneous | 13 | ||||
| NAS1786-08-18 | NAS Miscellaneous | 13 | ||||
| 7717-86DAP | BOYD Laconia | 5 | ||||
| NAS1786-06-36 | NAS Miscellaneous | 5 | ||||
| NAS1786C04-10 | NAS SPACERS/STANDOFFS/HANDLES | 3 | ||||
![]() Rochester Electronics | LPC1786FBD208,551![]() | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 120MHz, CMOS, PQFP208 RoHS : Compliant |
| 139 | |
| LT1786FCS#PBF | Analog Devices Inc | IC VOLT REG 1 OUT 13V - 18V 16-SOIC Tube RoHS : Compliant |
| 49 | ||
LT1786FCS#PBF![]() | Linear Technology | IC VOLT REG 1 OUT 13V - 18V 16-SOIC Tube RoHS : Compliant |
| 320 | ||
| MAX1786AEUI+CE3 | Maxim Integrated Products | MAX1786 Smart Battery Pack Controller RoHS : Compliant |
| 5,000 | ||
| MAX1786AEUI+T | Maxim Integrated Products | MAX1786 Smart Battery Pack Controller |
| 2,500 | ||
| MAX1786EUI+ | Maxim Integrated Products | MAX1786 Smart Battery Pack Controller ' |
| 7,833 | ||
| 2SA1786E-AN | SANYO Semiconductor Co Ltd | Transistor RoHS : Compliant |
| 2,219 | ||
![]() Sager | 1786857 | Phoenix Contact | Pluggable Terminal Blocks 4 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 336 | |
| 1617863 | Phoenix Contact | Circular Metric Connectors ST-17P1N8ACK02S RoHS : Compliant |
| 0 | ||
| CM1-X0-17-864-301-I | Carling Technologies | Circuit Breakers | 0 | |||
| 521786-000 | TE Connectivity | Multi-Conductor Cables 55PC0234-24-2/4/6CS2970 | 0 | |||
| 70220-1786 | OMRON Electronic Components | Specialty Controllers UMQ-2472-C | 0 | |||
| 0011317865 | Molex | Other Tools MOVING BLADE HOLDER |
| 0 | ||
| 178.6125.0002 | Littelfuse Inc | HOLDER COVER FOR FH2 (ATO) 1000 PC RoHS : Compliant |
| 0 | ||
| 1786899 | Phoenix Contact | Pluggable Terminal Blocks 8 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 2151786-1 | TE Connectivity | Crimpers / Crimping Tools OCATSFM128F192O02306 ASSY APPLICATOR TOOL | 0 | |||
| 178.6164.0001 | Littelfuse Inc | HOLDER - FLR (ATO) PCB 80V 1-PIN 100 PC RoHS : Compliant |
| 0 | ||
| 1786488 | Phoenix Contact | Pluggable Terminal Blocks 10 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 0 | ||
| 1786569 | Phoenix Contact | Pluggable Terminal Blocks 18 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 0 | ||
| 1786938 | Phoenix Contact | Pluggable Terminal Blocks 12 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 5-2151786-1 | TE Connectivity | TE Connectivity OCEAN_2.0_APPLICATOR-S-128F192O | 0 | |||
| 0431786002 | Molex | Headers & Wire Housings Sabre Term WtW M Tin 14-18 RoHS : Compliant |
| 0 | ||
![]() TME | 178.6764.0001 | Littelfuse Inc | Fuse holder; 10.9mm; THT; Leads: for soldering; UL94V-0; 125V RoHS : Compliant |
| 1,181 | |
| 1786290000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; 30A; PIN: 12; screw terminal RoHS : Compliant |
| 150 | ||
| 1200661786 | Molex | Cable: for sensors; M12; PIN: 4; unshielded; plug; 250V; 4A; IP67 RoHS : Compliant |
| 13 | ||
| 178.6164.0001 | Littelfuse Inc | Fuse holder; 19mm; soldered,spring terminals; UL94V-0; 80V RoHS : Compliant |
| 4 | ||
| 020317860000-M | TE Connectivity | 020317860000-M |
| 1 | ||
| 01 0017.86X 2.62 ORING 70SI RED | Oring Uszczelnienia Techniczne | O-ring gasket; silicone; Thk: 2.62mm; Øint: 17.86mm; red; -60÷160°C |
| 0 | ||
| 1786853 | Phoenix Contact | Connector: pluggable terminal block; COMBICON S; 250V; PIN: 4 RoHS : Compliant |
| 0 | ||
| 1786934 | Phoenix Contact | Connector: pluggable terminal block; COMBICON S; 250V; PIN: 12 RoHS : Compliant |
| 0 | ||
| 7000-44021-7860150 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male angled,M12 female angled |
| 0 | ||
| 7000-44021-7861000 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male angled,M12 female angled |
| 0 | ||
| 7000-44001-7860500 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; 5m; 60VDC; 60VAC; 4A; Cores: 2; PUR RoHS : Compliant |
| 0 | ||
| 7000-44001-7865000 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; 40m; 60VDC; 60VAC; 4A; Cores: 2; PUR RoHS : Compliant |
| 0 | ||
| CPC1786J | IXYS Corporation | Relay: solid state; 800mA; max.1kVDC; THT; i4-pac; OptoMOS; 2Ω RoHS : Compliant |
| 0 | ||
| 09178670 | GSR | Tap: metric; M14; fine thread,right hand thread; 1.5; L: 100mm |
| 0 | ||
| 178.6125.0001 | Littelfuse Inc | Fuse holder; 19mm; snap-on,spring terminals; UL94V-0; 58V RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 17861650002 | Littelfuse Inc | AVAILABLE EU | 2,855 | ||
![]() ComSIT USA | C0603C470J5GAC75217867 | KEMET Corporation | SURFACE MOUNT MULTILAYER CERAMIC CHIP CAPACITOR Ceramic Capacitor, Multilayer, Ceramic, 50V, 5% +Tol, 5% -Tol, C0G, 30ppm/Cel TC, 0.000047uF, Surface Mount, 0603 RoHS : Compliant | 48,000 | ||
| RL1786013C | Sumida Corporation | Electronic Component RoHS : Compliant | 13,700 | |||
| 17867640001 | Littelfuse Inc | Fuse Holder 30A 32VDC Through Hole Pin RoHS : Not Compliant | 11,800 | |||
| 17861640001 | Littelfuse Inc | Fuse Holder Holder Blade 15A Through Hole RoHS : Not Compliant | 490 | |||
| 1786174 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 450 | |||
| MAX17860ACBV+TCTK | Maxim Integrated Products | Multi-Cell Li-Ion Battery Pack Monitor, I�C interface, QFN-32, for battery management and protection applications RoHS : Compliant | 141 | |||
| 1786420 | Phoenix Contact | HEADER Barrier Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 126 | |||
| BD1786 | Discrete Semiconductor Industries | PNP EPITAXIAL SILICON TRANSISTOR Power Bipolar Transistor, 3A I(C), 60V V(BR)CEO, 1-Element, PNP, Silicon, TO-126, Plastic/Epoxy, 3 Pin RoHS : Not Compliant | 50 | |||
| 1786022V0 | Phoenix Contact | HEADER Barrier Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 50 | |||
![]() Interstate Connecting Components | NAS1786-3-8 | MISC MIL-AERO | UNCODED | 3 | ||
| 000L17860 | ITT Interconnect Solutions | VBN62821PNT108VO | 0 | |||
| A-1PA-178-600N2 | Amphenol RF | AMC RIGHT ANGLE PLUG TO AMC RI | 0 | |||
| 2151786-1 | TE Connectivity | OCEAN2.0_APPLICATOR-S-128F192O |
| 0 | ||
| 217-8663-241 | ITT Interconnect Solutions | 217-8663-241 | 0 | |||
| 217-8659-240 | ITT Interconnect Solutions | 217-8659-240 | 0 | |||
| 217-8664-000 | ITT Interconnect Solutions | 2178664000 | 0 | |||
| 217-8681-100 | ITT Interconnect Solutions | 217-8681-100 | 0 | |||
| 5-2151786-1 | TE Connectivity | OCEAN_2.0_APPLICATOR-S-128F192 |
| 0 | ||
| 317-8666-037 | ITT Interconnect Solutions | 317-8666-037 | 0 | |||
| 217-8667-100 | ITT Interconnect Solutions | 2178667100 | 0 | |||
| 2CMA178695R1000 | Amphenol Sine Systems | CUED 216-6RD 216 INDUSTRIAL SO | 0 | |||
| 163A17869X | Conec Corporation | D-SUB 44P HD RoHS : Compliant | 0 | |||
| 51786-001LF | Amphenol FCi | PWRBLADE RAH STB-51786-001LF RoHS : Compliant | 0 | |||
| 317-8666-014 | ITT Interconnect Solutions | 317-8666-014 | 0 | |||
![]() NexGen Digital | 1786459 | Phoenix Contact | RoHS : Compliant | 200 | ||
| 1786417 | Phoenix Contact | RoHS : Compliant | 20 | |||
SN65HVD1786DR![]() | Texas Instruments | RoHS : Compliant | 6 | |||
![]() PEI Genesis | 217-8679-000 | ITT Interconnect Solutions |
| 63 | ||
| Y1786 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| K1786 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| J1786ANF-F03F | SOURIAU-SUNBANK |
| 0 | |||
| 217-8664-000 | ITT Interconnect Solutions |
| 0 | |||
| 217-8681-100 | ITT Interconnect Solutions |
| 0 | |||
| 317-8666-037 | ITT Interconnect Solutions |
| 0 | |||
| S1786-49100A-4 | SOURIAU-SUNBANK |
| 0 | |||
| 317-8666-014 | ITT Interconnect Solutions |
| 0 | |||
| 217-8660-100 | ITT Interconnect Solutions |
| 0 | |||
| 217-8682-232 | ITT Interconnect Solutions |
| 0 | |||
| 217-8683-240 | ITT Interconnect Solutions |
| 0 | |||
| 317-8666-002 | Sure Seal Connections |
| 0 | |||
| 317-8666-013 | ITT Interconnect Solutions |
| 0 | |||
| J1786DNB4-M34F | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 2178659-2 | TE Connectivity | Connectors |
| 122,430 | |
| 2178661-2 | TE Connectivity | Terminal Blocks RoHS : Compliant |
| 12,514 | ||
| 1971786-2 | TE Connectivity | Contacts RoHS : Compliant |
| 11,616 | ||
| 617867-000 | TE Connectivity | solder sleeve RoHS : Compliant |
| 2,979 | ||
| 5178647-4 | TE Connectivity | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 2,376 | ||
| 1-1801178-6 | TE Connectivity | Connectors RoHS : Compliant |
| 1,416 | ||
| 6-178691-6 | TE Connectivity | Connectors RoHS : Compliant |
| 1,089 | ||
| 5-104178-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 478 | ||
| 10129817-868100LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 99 | ||
| 2178696-4 | TE Connectivity | Connectors |
| 76 | ||
| 178602-2 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 44 | ||
| 817860-SF | TE Connectivity | TE COMPONENT 817860-SF |
| 40 | ||
| 1217861-1 | TE Connectivity | PCB TABS STRIP RoHS : Compliant |
| 23 | ||
| 821786-SF | TE Connectivity | TE COMPONENT 821786-SF RoHS : Compliant |
| 13 | ||
| 020317860000-M | TE Connectivity | SENSOR 020317860000-M |
| 1 | ||
![]() Richardson RFPD | A-1PA-178-600N2 | Amphenol Corporation | RF Cable Assembly AMC Right Angle Plug to AMC Righ RoHS : Compliant |
| 0 | |
| 935317861557 | NXP Semiconductors | MCU 32-bit ARM Cortex M0+ RISC 128KB Flash 1.8V/2. RoHS : Compliant | 0 | |||
| LT1786FCS#TRPBF | Analog Devices Inc | CCFL Controller 5V/9V/12V/15V/18V/24V 100kHz 16-Pi RoHS : Compliant |
| 0 | ||
| 570ACA001786DG | Skyworks Solutions Inc | Oscillator XO 28MHz ±20ppm LVPECL 55% 3.3V 8-Pin S RoHS : Compliant |
| 0 | ||
| CCMX2-MM-RG178-6 | Crystek Corporation | Cable Assembly Coaxial 0.152m MMCX to MMCX M-M RoHS : Not Compliant | 0 | |||
| 80317861 | HUBER+SUHNER | 29429-1 RoHS : Compliant | 0 | |||
| SI5342B-D11786-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| 570ACA001786DGR | Skyworks Solutions Inc | Oscillator XO 28MHz ±20ppm LVPECL 55% 3.3V 8-Pin S RoHS : Compliant |
| 0 | ||
| LT1786FCS#PBF | Analog Devices Inc | CCFL Controller 5V/9V/12V/15V/18V/24V 100kHz 16-Pi RoHS : Compliant |
| 0 | ||
| DC1786A | Analog Devices Inc | LTC2871IUHF Bus Line Transceiver Demonstration Cir RoHS : Compliant |
| 0 | ||
| SI5342B-D11786-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 4 RoHS : Compliant | 0 | |||
| 22641786 | HUBER+SUHNER | Conn BNC 75Ohm Crimp ST Panel Mount F Gold Over Ni RoHS : Compliant |
| 0 | ||
| 85178679 | HUBER+SUHNER | SENCITY Road IC MIMO Antenna RoHS : Compliant |
| 0 | ||
![]() Rutronik | 178.6764.0001 | Littelfuse Inc | AUTOHOLDER FL1 14x15.6 for FK1 RoHS : Compliant |
| 30,900 | |
| 178.6165.0002 | Littelfuse Inc | FLR p.c.p. holder black 4 pins RoHS : Compliant |
| 13,500 | ||
| 178.6165.0001 | Littelfuse Inc | FLR p.c.p. holder black 4 pins RoHS : Compliant |
| 9 | ||
![]() Chip 1 Exchange | 2178659-2 | TE Connectivity | INSTOCK | 241,150 | ||
| 501786-3091 | Molex | INSTOCK | 60,840 | |||
| 501786-3092 | Molex | INSTOCK | 56,160 | |||
| 2178661-2 | TE Connectivity | INSTOCK RoHS : Compliant | 24,648 | |||
| 501786-5091 | Molex | INSTOCK RoHS : Compliant | 23,400 | |||
| 1-2178661-3 | TE Connectivity | INSTOCK RoHS : Compliant | 19,142 | |||
| 501786-5081 | Molex | INSTOCK RoHS : Compliant | 10,530 | |||
| 281786-4 | TE Connectivity | INSTOCK RoHS : Compliant | 5,729 | |||
| 5178647-4 | TE Connectivity | INSTOCK RoHS : Compliant | 4,680 | |||
| 6-178691-6 | TE Connectivity | INSTOCK RoHS : Compliant | 2,145 | |||
| 17861650001- | INSTOCK | 1,000 | ||||
| 17861650001 | INSTOCK | 1,000 | ||||
| 317-8657-000 | Plessey Semiconductors Ltd | INSTOCK | 490 | |||
| 317-8657-000 | ITT Interconnect Solutions | INSTOCK RoHS : Compliant | 98 | |||
| 1786831- | Phoenix Contact | INSTOCK | 59 | |||
![]() Avnet Abacus | 1217861-1 | TE Connectivity | PCB Terminal 635mm x 081mm 025 x 0032 Brass 14 mm Tin FASTON 250 (Alt: 1217861-1) RoHS : Compliant | 280,000 | ||
| 1786446 | Phoenix Contact | IC 25 6G508 IC256G508 (Alt: 1786446) RoHS : Compliant | 600 | |||
| 1786404 | Phoenix Contact | Terminal Block Socket 508 mm 2 Ways 12 A 250 V Through Hole Right Angle (Alt: 1786404) RoHS : Compliant | 400 | |||
| 1786844 | Phoenix Contact | Pluggable Terminal Block 5 mm 3 Ways 24 AWG 12 AWG 25 mm Screw (Alt: 1786844) RoHS : Compliant | 300 | |||
| 1786190 | Phoenix Contact | Conn Pluggable Terminal HDR 4 POS 508mm Screw ST 12A (Alt: 1786190) RoHS : Compliant | 150 | |||
| 1786271 | Phoenix Contact | IC 2512ST508 IC2512ST508 (Alt: 1786271) RoHS : Compliant | 150 | |||
| 1786187 | Phoenix Contact | Pluggable Terminal Block 508 mm 3 Ways 24 AWG 12 AWG 25 mm Screw (Alt: 1786187) RoHS : Compliant | 150 | |||
| 1786174 | Phoenix Contact | Conn Pluggable Terminal HDR 2 POS 508mm Screw ST 12A (Alt: 1786174) RoHS : Compliant | 150 | |||
| 1786255 | Phoenix Contact | IC 2510ST508 IC2510ST508 (Alt: 1786255) RoHS : Compliant | 150 | |||
| 1786417 | Phoenix Contact | IC 25 3G508 IC253G508 (Alt: 1786417) RoHS : Compliant | 150 | |||
| 1786420 | Phoenix Contact | Terminal Block Header 508 mm 4 Ways 12 A 320 V Through Hole Right Angle (Alt: 1786420) RoHS : Compliant | 150 | |||
| 1786239 | Phoenix Contact | IC 25 8ST508 IC258ST508 (Alt: 1786239) RoHS : Compliant | 150 | |||
| 1786831 | Phoenix Contact | Pluggable Terminal Block 5 mm 2 Ways 24 AWG 12 AWG 25 mm Screw (Alt: 1786831) RoHS : Compliant | 100 | |||
| 1786213 | Phoenix Contact | IC 25 6ST508 IC256ST508 (Alt: 1786213) RoHS : Compliant | 100 | |||
| 1786200 | Phoenix Contact | IC 25 5ST508 IC255ST508 (Alt: 1786200) RoHS : Compliant | 50 | |||
![]() Avnet Asia | 5-2267178-6 | TE Connectivity | (Alt: 5-2267178-6) RoHS : Compliant |
| 37,500 | |
| 5017868090 | Molex | (Alt: 5017868090) RoHS : Compliant | 0 | |||
| 1971786-1 | TE Connectivity | (Alt: 1971786-1) RoHS : Compliant |
| 0 | ||
| 1000178659 | Molex | ZQSFP+ 1X4 CG ASY RB, SDR RING CUT,HS LP (Alt: 1000178659) RoHS : Compliant | 0 | |||
| 5017865091 | Molex | (Alt: 5017865091) RoHS : Compliant | 0 | |||
| 1971786-2 | TE Connectivity | (Alt: 1971786-2) RoHS : Compliant | 0 | |||
| 10117863-2036020LF | Amphenol Corporation | (Alt: 10117863-2036020LF) RoHS : Compliant | 0 | |||
| 1000178657 | Molex | ZQSFP+ 1X4, W/ PN HS FLARED LP (Alt: 1000178657) RoHS : Compliant | 0 | |||
![]() Avnet Silica | PIC16F1786-I/SP![]() | Microchip Technology Inc | MCCPIC16F1786ISP (Alt: PIC16F1786-I/SP) RoHS : Compliant | 0 | ||
PIC16F1786-E/SP![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SPDIP Tube (Alt: PIC16F1786-E/SP) RoHS : Compliant | 0 | |||
PIC16F1786-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SSOP Tube (Alt: PIC16F1786-I/SS) RoHS : Compliant | 0 | |||
PIC16F1786-E/SS![]() | Microchip Technology Inc | (Alt: PIC16F1786-E/SS) RoHS : Compliant | 0 | |||
PIC16F1786-E/ML![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin QFN EP Tube (Alt: PIC16F1786-E/ML) RoHS : Compliant | 0 | |||
PIC16F1786-I/ML![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin QFN EP Tube (Alt: PIC16F1786-I/ML) RoHS : Compliant | 0 | |||
PIC16F1786-I/SO![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SOIC Tube (Alt: PIC16F1786-I/SO) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 16KB Flash 33V5V 28Pin SSOP TR (Alt: PIC16F1786T-I/SS) RoHS : Compliant | 0 | |||
PIC16LF1786-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16LFxx PIC RISC 16KB Flash 33V 28Pin SSOP Tube (Alt: PIC16LF1786-I/SS) RoHS : Compliant | 0 | |||
PIC16F1786T-I/ML![]() | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16F178x Series Microcontrollers PIC16 32 MHz 14 KB 28 Pins QFNEP (Alt: PIC16F1786T-I/ML) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SO![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SOIC TR (Alt: PIC16F1786T-I/SO) RoHS : Compliant | 0 | |||
PIC16LF1786-I/ML![]() | Microchip Technology Inc | MCCPIC16LF1786IML (Alt: PIC16LF1786-I/ML) RoHS : Compliant | 0 | |||
PIC16LF1786T-I/SS![]() | Microchip Technology Inc | 14KB FLASH 1KB RAM 256B EEPROM 12BIT ADC 8BIT DAC PSM (Alt: PIC16LF1786T-I/SS) RoHS : Compliant | 0 | |||
LPC1786FBD208,551![]() | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1786FBD208,551) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | 1786-XT | 47 | ||||
![]() Component Electronics, Inc | 671-7862 | IN STOCK SHIP TODAY | 696 | |||
| 178696-000 | TE Connectivity | IN STOCK SHIP TODAY |
| 12 | ||
| 1786679 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| 21117-863 | nVent Schroff | IN STOCK SHIP TODAY |
| 3 | ||
![]() DB Roberts | 23011786 | Pop Rivets | T-VALVE REAR CASE | 0 | ||
| 461786 | Essentra Components | 0 | ||||
| 551786 | Essentra Components | 0 | ||||
| 20041786 | Essentra Components | 0 | ||||
| 20591786 | Essentra Components | M12 METRIC THREAD KNURLED CAPT | 0 | |||
| 17W01786 | Essentra Components | FLAT WASHER, .085 ID, .165 OD, | 0 | |||
| 17W01786B | Essentra Components | FLAT WASHER, .085 ID, .165 OD, | 0 | |||
![]() EBV Elektronik | PIC16F1786-I/SP![]() | Microchip Technology Inc | MCCPIC16F1786ISP (Alt: PIC16F1786-I/SP) RoHS : Compliant | 0 | ||
PIC16F1786-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SSOP Tube (Alt: PIC16F1786-I/SS) RoHS : Compliant | 0 | |||
PIC16F1786-I/ML![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin QFN EP Tube (Alt: PIC16F1786-I/ML) RoHS : Compliant | 0 | |||
PIC16F1786-I/SO![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SOIC Tube (Alt: PIC16F1786-I/SO) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16Fxx PIC RISC 16KB Flash 33V5V 28Pin SSOP TR (Alt: PIC16F1786T-I/SS) RoHS : Compliant | 0 | |||
PIC16LF1786-I/SS![]() | Microchip Technology Inc | MCU 8Bit PIC16LFxx PIC RISC 16KB Flash 33V 28Pin SSOP Tube (Alt: PIC16LF1786-I/SS) RoHS : Compliant | 0 | |||
PIC16F1786T-I/ML![]() | Microchip Technology Inc | 8 Bit MCU PIC16 Family PIC16F178x Series Microcontrollers PIC16 32 MHz 14 KB 28 Pins QFNEP (Alt: PIC16F1786T-I/ML) RoHS : Compliant | 0 | |||
PIC16LF1786-I/SP![]() | Microchip Technology Inc | SPDIP 14KB Flash 1KB RAM 256B EEPROM 12bit ADC 8bit DAC PSMC OPAmp FastComp CCP I2CSPI EUSART na (Alt: PIC16LF1786-I/SP) RoHS : Compliant | 0 | |||
PIC16F1786T-I/SO![]() | Microchip Technology Inc | MCU 8Bit PIC16 PIC RISC 14KB Flash 33V5V 28Pin SOIC TR (Alt: PIC16F1786T-I/SO) RoHS : Compliant | 0 | |||
PIC16LF1786-I/ML![]() | Microchip Technology Inc | MCCPIC16LF1786IML (Alt: PIC16LF1786-I/ML) RoHS : Compliant | 0 | |||
PIC16LF1786T-I/SS![]() | Microchip Technology Inc | 14KB FLASH 1KB RAM 256B EEPROM 12BIT ADC 8BIT DAC PSM (Alt: PIC16LF1786T-I/SS) RoHS : Compliant | 0 | |||
LPC1786FBD208,551![]() | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1786FBD208,551) RoHS : Compliant | 0 | |||
| F17867_LINDA-40-W-FLEX-1500MM | LEDIL | F17867LINDA40WFLEX1500mm (Alt: F17867_LINDA-40-W-FLEX-1500MM) RoHS : Compliant | 0 | |||
![]() FDH Electronics | NAS1786C06-10 | FDH Electronics | Placeholder | 53 | ||
| 1786255 | Phoenix Contact | PCB Connectors RoHS : Compliant | 2 | |||
![]() Flip Electronics | LPC1786FBD208,551![]() | NXP Semiconductors | Stock RoHS : Compliant | 6,264 | ||
LPC1786FBD208![]() | NXP Semiconductors | Stock RoHS : Compliant | 1,620 | |||
![]() Maritex | 1217861-1 | TE Connectivity | Quick Connect, Disconnect Terminals; 1217861-1; TE CONNECTIVITY; Brass; Tin; Tin; 6.35 mm RoHS : Compliant |
| 119,866 | |
| 1971786-1 | TE Connectivity | Rectangular Connector Contacts; 1971786-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 24 AWG RoHS : Compliant |
| 12,043 | ||
SN65HVD1786DR![]() | Texas Instruments | Other Interface ICs; SN65HVD1786DR; TEXAS INSTRUMENTS; 8; 5.5 V; 4.5 V; SOIC RoHS : Compliant |
| 403 | ||
| 178602-1 | TE Connectivity | Rectangular Connector Housings; 178602-1; TE CONNECTIVITY; 1; 2; 2; Yes RoHS : Compliant |
| 32 | ||
![]() Master Electronics | 178.6164.0001 | Littelfuse Commercial Vehicle Products | Blade Fuse Holders - Flr Pcb Fuse Holder For Ato Style Blade Fuse Rated 80V RoHS : Compliant |
| 200 | |
| 1517860000 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header (2 Sides) M 8 POS 5.08mm Solder ST Thru-Hole Box RoHS : Compliant |
| 49 | ||
| 1786488 | Phoenix Contact | PCB headers - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 10 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.5 mm RoHS : Compliant |
| 32 | ||
| 1617863 | Phoenix Contact | Panel feed-through - SPEEDCON locking - M17 - number of positions: 17 - type of contact: Pin - Crimp connection - Flat gasket - 4x ˜ 3.2 - shielded: yes - flange dimensions: 25.75 mm x 25.75 mm - cable diameter range: 3.5 mm ... 5.5 mm RoHS : Compliant |
| 0 | ||
| 521786-000 | TE Connectivity | 55PC0234-24-2/4/6CS2970 MOQ Reduction RoHS : Not Compliant |
| 0 | ||
| A-1PA-178-600N2 | Amphenol RF | AMC Right Angle Plug to AMC Right Angle Plug RG-178 50 Ohm 600 mm (23.62 Inches) RoHS : Compliant |
| 0 | ||
| 701771786 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| FFSD-06-S-17.86-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSDT-02-20-L-17.86-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| CT317-8661-007 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| CT317-8666-002 | ITT Interconnect Solutions | Contact Holder Tip for Sure Seal Hand Insertion Tool RoHS : Not Compliant |
| 0 | ||
| FFSD-15-D-17.86-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1786899 | Phoenix Contact | PCB connector - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 8 - pitch: 5 mm - connection method: Screw connection with tension sleeve - color: green - contact surface: Tin RoHS : Compliant |
| 0 | ||
| 2151786-1 | TE Connectivity | OCEAN_2.0_APPLICATOR-S-128F192O RoHS : Not Compliant |
| 0 | ||
| 1786569 | Phoenix Contact | PCB headers - nominal current: 12 A - rated voltage (III/2): 320 V - nominal cross section: 2.5 mm² - number of positions: 18 - pitch: 5.08 mm - color: green - contact surface: Tin - mounting: Wave soldering - pin layout: Linear pinning - solder pin [P]: 3.5 mm RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 1786019 | Phoenix Contact | Pluggable Terminal Blocks 9 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 50 | |
| 1786064 | Phoenix Contact | Pluggable Terminal Blocks 14 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 50 | ||
| 1786271 | Phoenix Contact | Pluggable Terminal Blocks 12 Pos Invert Plug 24-12AWG Screw RoHS : Compliant |
| 50 | ||
| 1786433 | Phoenix Contact | Pluggable Terminal Blocks 5 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 50 | ||
| 2817864 | Phoenix Contact | Surge Protection Accessories MPB 18/1- 5 RoHS : Compliant |
| 9 | ||
| 1786790000 | Weidmüller Interface GmbH & Co. KG | Heavy Duty Power Connectors HDC 64D TSBO 1M32G RoHS : Compliant |
| 3 | ||
| 6191786 | RS Pro | EPDM Foam Tape, 32'10"x0.8"(10mx20mm), 0.2"(5mm) Thick, Black |
| 1 | ||
| 1786857 | Phoenix Contact | PCB Connector, F Contact, Screw 5mm 12AWG 320V 12A, 4 Pos 4 Conn, COMBICON MSTB Series RoHS : Compliant |
| 0 | ||
| 1786938 | Phoenix Contact | Pluggable Terminal Blocks 12 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 1786983 | Phoenix Contact | Pluggable Terminal Blocks 17 Pos 5mm pitch Plug 24-12 AWG Screw RoHS : Compliant |
| 0 | ||
| 1786853 | Phoenix Contact | Pluggable Terminal Blocks 4 Pos 3.5mm Dbl Row Through Hole Header RoHS : Compliant |
| 0 | ||
| 1786190 | Phoenix Contact | PCB Plug Screw 5.08mm 12AWG 320V 12A 4 Position COMBICON IC Series RoHS : Compliant |
| 0 | ||
| 1786226 | Phoenix Contact | PCB Connector, Male, 1row 7 Pos, 5.08mm, 24-12AWG Screw, IC 2,5/ 7-ST-5,08 RoHS : Compliant |
| 0 | ||
| 1786307 | Phoenix Contact | PCB Connector, Male, 1row 15 Pos, 5.08mm, 24-12AWG Screw, IC 2,5/15-ST-5,08 RoHS : Compliant |
| 0 | ||
| 1786352 | Phoenix Contact | Pluggable Terminal Blocks 20 Pos 5.08mm Invert Plug 24-12AWG Screw RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17867 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17867 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17867 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17867 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17867 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 745 | ||
| PE3W17866 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Female Low PIM Cable Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17866 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17866 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17866 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17866 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 220 | |||
| PE3W17867-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 36 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 36 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 36 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17867-36 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17867-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17867-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17867-36 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17867-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 60 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 60 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 60 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17867-60 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17867-60 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17867-60 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17867-60 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17864-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Low PIM Cable 24 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 24 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 24 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17864-24 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17864-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17864-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17866-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male to NEX10 Female Low PIM Cable 50 CM Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 50 cm length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 50 cm length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17866-50CM can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17866-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17866-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17866-50CM can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | ||
| PE3W17866-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Female Low PIM Cable 36 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 36 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 36 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17866-36 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17866-36 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17866-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17866-36 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | ||
| PE3W17861-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Female to NEX10 Female Low PIM Cable 24 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 female to NEX10 female low PIM cable 24 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female to NEX10 female low PIM cable 24 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17861-24 can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17861-24 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17861-24 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 22 | ||
| PE3W17861-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Female to NEX10 Female Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 female to NEX10 female low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 female to NEX10 female low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has female gender on end 1 and female on end 2. PE3W17861-50CM can also be known as a low PIM NEX10 jack to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17861-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 jack to NEX10 jack cable assembly PE3W17861-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 jack to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 22 | ||
| PE3W17860 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female bulkhead low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17860 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17860 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17860 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17860 can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3C3178-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. N Male to N Male Right Angle Cable Using RG316-DS Coax., Radio frequency assembly N male to N male right angle cable using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male right angle cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE3C3178-60, can also be known as a type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C3178-60 is built with RG316-DS which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3178-60 can also be used in the other direction and will be right angle type N male to N type male cable assembly if the opposite connectivity is required. Type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle cable using RG316-DS coax. |
| 0 | ||
| PE3W17860-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female bulkhead low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17860-60 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17860-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17860-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17860-60 can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17865-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Male Right Angle Low PIM Cable 12 Inch Length Using SPO-250 Coax., Radio frequency assembly NEX10 male to NEX10 male right angle low PIM cable 12 inch length using SPO-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male right angle low PIM cable 12 inch length using SPO-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17865-12 can also be known as a low PIM NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17865-12 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17865-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17865-12 can also be used in the other direction and will be right angle NEX10 male to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1786 | Pasternack Enterprises | 0 | ||||
| PE3W17860-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male Right Angle to NEX10 Female Bulkhead Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17860-50CM can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17860-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17860-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17860-50CM can also be used in the other direction and will be NEX10 female bulkhead to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 1217861-1 | TE Connectivity | 250 FASTON,PCB TAB,TCBR PCB Terminal Type: Tab Mating Tab Width: .25 in Mating Tab Width: 6.35 mm PCB Hole Diameter: 1.4 mm PCB Hole Diameter: .055 in Tab .25" 6.35 mm 1.4 mm | PCB Terminal | Part Number: 1217861-1 | Internal Number: 1217861-1 | .25" | TE Connectivity RoHS : Compliant |
| 303,670 | |
| 1971786-2 | TE Connectivity | PTL TAB CONTACT, 20 - 24 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Tab Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 20 AWG Operating Voltage: 600 VAC Tin (Sn) Tab Pre-Tin 24 – 20 AWG | Tab Contact — Power Triple Lock | Part Number: 1971786-2 | Internal Number: 1971786-2 | TE Connectivity RoHS : Compliant |
| 90,390 | ||
| 281786-2 | TE Connectivity | PLUG HE14 IDC 180 2 P AWG 28-26 Number of Positions: 2 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: With Termination Method to Wire & Cable: Insulation Displacement (IDC) He13/he14 Idc Receptacle & Srst & Awg24-2 | 2 Receptacle Connector Assembly With | Part Number: 281786-2 | Internal Number: 281786-2 | TE Connectivity RoHS : Compliant |
| 562 | ||
| 281786-3 | TE Connectivity | PLUG HE14 IDC 180 3 P AWG 28-26 Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Retention: With Termination Method to Wire & Cable: Insulation Displacement (IDC) He13/he14 Idc Receptacle & Srst & Awg24-2 | 3 Receptacle Connector Assembly With | Part Number: 281786-3 | Internal Number: 281786-3 | TE Connectivity RoHS : Compliant |
| 1 | ||
![]() Vyrian | 1786569 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 12,453 | ||
| LT1786FCS | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant | 10,986 | |||
| 1786853 | Phoenix Contact | Barrier Strip Terminal Block, 8A, 1.5mm2, 2 Row(s), 1 Deck(s) RoHS : Compliant | 10,206 | |||
| 1786938 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,421 | |||
| 1786488 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 9,357 | |||
| LT1786FCS#TRPBF | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Compliant | 7,929 | |||
| 1-786863-7 | TE Connectivity | D Type Connector, 68 Contact(s), Female, 0.05 inch Pitch, IDC Terminal, #4-40, Receptacle RoHS : Not Compliant | 7,674 | |||
| 1786064 | Phoenix Contact | Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,382 | |||
| 5441786 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,993 | |||
| 1786899 | Phoenix Contact | Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 5,777 | |||
| LT1786FCS#TR | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 0.1A, 240kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant | 5,715 | |||
PIC16F1786T-I/SS![]() | Microchip Technology Inc | RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO28 RoHS : Compliant | 4,335 | |||
SN65HVD1786P![]() | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDIP8 RoHS : Compliant | 4,243 | |||
| 2-178697-6 | Tyco Electronics Amp | Board Connector, 6 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal | 777 | |||
| 1786934 | Phoenix Contact | Barrier Strip Terminal Block RoHS : Compliant | 732 | |||
![]() Win Source Electronics | SN65HVD1786D![]() | Texas Instruments | IC FAULT-PROT RS485 TXRX 8-SOIC RoHS : Compliant |
| 30,000 | |
SN65HVD1786DR![]() | Texas Instruments | Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC T/R / IC FAULT-PROT RS485 TXRX 8-SOIC RoHS : Compliant |
| 28,480 | ||
SN65HVD1786DRG4![]() | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC RoHS : Compliant |
| 27,980 | ||
SN65HVD1786DG4![]() | Texas Instruments | IC FAULT-PROT RS485 TXRX 8-SOIC RoHS : Compliant |
| 27,220 | ||
| 178.6164.0002 | Littelfuse Inc | FUSE HOLDER BLADE 80V PCB RoHS : Compliant |
| 17,500 | ||
| 178.6165.0002 | Littelfuse Inc | FUSE HOLDER BLADE 80V PCB RoHS : Compliant |
| 3,000 | ||
| 178.6764.0001 | Littelfuse Inc | FUSE HOLDER BLADE 32V PCB RoHS : Compliant |
| 860 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |