 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1785G-S08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | 801-011-07NF17-85PC | Glenair Inc | - Bulk (Alt: 801-011-07NF17-85PC) RoHS : Not Compliant |
| 78 | |
| MKJ1A2F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A2F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A26F17-85PA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A26F17-85PA) RoHS : Not Compliant |
| 10 | ||
| MKJ1A7F17-85SA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A7F17-85SA) RoHS : Not Compliant |
| 8 | ||
| MKJ1C7F17-85DA | ITT Interconnect Solutions | - Bulk (Alt: MKJ1C7F17-85DA) RoHS : Not Compliant |
| 7 | ||
| CT317-8531-001 | ITT Interconnect Solutions | - Bulk (Alt: CT317-8531-001) RoHS : Not Compliant |
| 0 | ||
| CT317-8578-000 | ITT Interconnect Solutions | - Bulk (Alt: CT317-8578-000) RoHS : Not Compliant | 0 | |||
| MKJ1A26T17-85PB | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A26T17-85PB) RoHS : Not Compliant |
| 0 | ||
| MKJ1A2F17-85PF | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A2F17-85PF) RoHS : Not Compliant |
| 0 | ||
| MKJ1A7W17-85PF | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A7W17-85PF) RoHS : Not Compliant |
| 0 | ||
| MKJ1A7Z17-85SD | ITT Interconnect Solutions | - Bulk (Alt: MKJ1A7Z17-85SD) RoHS : Not Compliant |
| 0 | ||
| MKJ1B1F17-85SC | ITT Interconnect Solutions | - Bulk (Alt: MKJ1B1F17-85SC) RoHS : Not Compliant |
| 0 | ||
| MKJ1B26W17-85PB | ITT Interconnect Solutions | - Bulk (Alt: MKJ1B26W17-85PB) RoHS : Not Compliant |
| 0 | ||
| MKJ1B2T17-85SF | ITT Interconnect Solutions | - Bulk (Alt: MKJ1B2T17-85SF) RoHS : Not Compliant |
| 0 | ||
| MKJ1B6W17-85SE | ITT Interconnect Solutions | - Bulk (Alt: MKJ1B6W17-85SE) RoHS : Not Compliant |
| 0 | ||
 Newark | 10178591-00011LF | Amphenol Communications Solutions | Usb Conn, Type C2.0Rcpt, 6P, Smt, Th; |Amphenol Communications Solutions 10178591-00011LF RoHS : Compliant |
| 9,960 | |
| LT1785ACS8#TRPBF | Analog Devices Inc | Rs422/Rs485 Transceiver, 0 To 70Deg C; |Analog Devices, Inc. LT1785ACS8#TRPBF RoHS : Compliant |
| 3,308 | ||
| 10178547-102LF | Amphenol Communications Solutions | Conn, Temp Sensor, Female, 2P, 1A, 125V; Product Range:Rotasense Series; Sensor Connector Size:-; Sensor Connector Gender:Female; No. Of Positions:2 Positions; Sensor Contact Type:Socket; Ip/Nema Rating:-; Connector Coding:- RoHS : Not Compliant |
| 840 | ||
| 217851-1144 | Molex | Cable Assy, Ring Tongue-Free End, 300Mm; Connector To Connector:Perma-Seal Ring Tongue Terminal To Free End; Cable Length - Imperial:11.8"; Cable Length - Metric:300Mm; Product Range:Perma-Seal Ots 217851 Series Rohs Compliant: Yes |Molex 217851-1144 RoHS : Compliant |
| 200 | ||
| KS-1785-BT | BUD Industries Inc | Rack Shelf, 2.0, 483Mm, 521Mm; |Bud Industries KS-1785-BT RoHS : Compliant |
| 76 | ||
| LT1785ACS8#PBF | Analog Devices Inc | Rs422/Rs485 Transceiver, 0 To 70Deg C; |Analog Devices, Inc. LT1785ACS8#PBF RoHS : Compliant |
| 55 | ||
| 2317857-2 | TE Connectivity | Dust & Emi Cover, Osfp I/O Connector; |Te Connectivity 2317857-2 RoHS : Compliant |
| 23 | ||
| MAX17852ACB/V+ | Analog Devices Inc | Data Acquisition System, -40 To 125Deg C; |Analog Devices, Inc. MAX17852ACB/V+ RoHS : Compliant |
| 15 | ||
| FMCN1785 | Fairview Microwave Inc | Rf/Coaxial Connector, 2.4Mm Coaxial; |Fairview Microwave FMCN1785 RoHS : Not Compliant |
| 10 | ||
| EURO-MXPD-112-1521-360-1178-50 | Variohm EuroSensor | Sensor, Hall Effect/Rotary, Cw/Ccw, 360D; |Variohm Group EURO-MXPD-112-1521-360-1178-50 RoHS : Compliant |
| 5 | ||
| DC1785B | Analog Devices Inc | Demonstration Board, Ltc2991, Current; |Analog Devices, Inc. DC1785B RoHS : Compliant |
| 1 | ||
SN65HVD1785DR | Texas Instruments | Rs485 Transceiver, 115Kbps, Soic-8; Available Until Stocks Are Exhausted |Texas Instruments SN65HVD1785DR RoHS : Compliant |
| 1 | ||
| SN65HVD1785DR | Texas Instruments | Rs485 Transceiver, 115Kbps, Soic-8; Available Until Stocks Are Exhausted |Texas Instruments SN65HVD1785DR RoHS : Compliant |
| 1 | ||
| 1785 | Ultimaker BV | 3D Printer Filament, Pp, 2.85Mm, Natural; |Ultimaker 1785 RoHS : Compliant |
| 0 | ||
| 1785 | Adafruit Industries | Medium Surface Transducer With Wires - 4 Ohm 3 Watt |Adafruit 1785 RoHS : Not Compliant |
| 0 | ||
 Analog Devices Inc | MAX17852ACB/V+ | Analog Devices Inc | 14 Channel High-Voltage Data-A RoHS : Compliant |
| 6,861 | |
| LT1785HS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 3,000 | ||
| MAX17854ACB/V+ | Analog Devices Inc | Automotive 14-Channel High-Vol RoHS : Compliant |
| 1,329 | ||
| LT1785AIS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 1,319 | ||
| LT1785AIS8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 1,241 | ||
| LT1785CS8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 679 | ||
| LT1785ACN8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 317 | ||
| MAX17851AUP/V+T | Analog Devices Inc | Automotive SPI to UART Bridge RoHS : Compliant |
| 303 | ||
| LT1785ACS8#PBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 293 | ||
| MAX31785AETL+T | Analog Devices Inc | 6 CHANNEL INTELLIGENT FAN CONT RoHS : Compliant |
| 25 | ||
| DC1785B | Analog Devices Inc | LTC2991 Demo board - I2C Tempe |
| 24 | ||
| MAX31785K# | Analog Devices Inc | Eval Kit MAX31785 (6 Channel I |
| 18 | ||
| MAX17854EVKIT# | Analog Devices Inc | EVKIT for 14 Channel BMS IC | 9 | |||
| LT1785AHS8#TRPBF | Analog Devices Inc | 60V Fault Protected RS485/RS42 RoHS : Compliant |
| 0 | ||
| MAX17853ACB/V+T | Analog Devices Inc | 14 Channel High-Voltage Data-A RoHS : Compliant | 0 | |||
 RS | 178513 | RS Pro | CABLE TIE NATURAL NON-RELEASABLE 121.3 LB (55KG) 15 X 0.3 IN (385 X 7.6MM) |
| 346 | |
| SMPO-8E (178563) | Festo | PROXIMITY SENSOR FOR T SLOT, 3/2 M5, 0.2IN, 5MM, 2-8BAR, SERIES |
| 58 | ||
| 1785955 (ICV 2 5/ 3-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 3 POSITION COMBICON ICV SERIES |
| 50 | ||
| FN2640-20-08-C11 (821785) | TE Connectivity | EMC/EMI FILTER, IEC INLET, 250 VAC, M4 SCREW, 20A, FN2640 SERIES |
| 20 | ||
| 1785942 (ICV 2 5/ 2-G-5 08) | Phoenix Contact | PLUGGABLE HEADER 5.08MM 12AWG 320V 12A 2 POSITION COMBICON ICV SERIES |
| 17 | ||
| 1785029 | RS Pro | MULTI FUNCTION 4PDT TIMER RELAY 12-240VAC/VDC SCREW TERMINAL DIN RAIL MOUNT |
| 15 | ||
| RT-100 (301785-000-HT) | Smiths Interconnect | INERTION TOOL FLUSH FOR R-100 SERIES |
| 15 | ||
| 2451785 (25531492) (MPOI02501500-100RS) | RS Pro | SCREW, 1/4-20 X 1 1/2 PHILLIPS OVAL MACHINE, ZINC PLATED |
| 5 | ||
| 2691785 | RS Pro | CABLE TIE 203X4.8 BLACK FLAME RETARDANT |
| 4 | ||
| KS-1785-BT | BUD Industries Inc | SHELF, STEEL, 18 GA., 140 LBS. (PER PAIR), 19 IN., BLACK TEXTURED, 19 IN. |
| 3 | ||
| 8111785 | RS Pro | CABLE TIE NATURAL NYLON66 NON-RELEASABLE 4.4 X 0.1 IN (111 X 2.6MM) |
| 2 | ||
| 5178524 | RS Pro | 300 MM WATER PUMP PLIERS BOX JOINT WITH 6 - 48MM JAW CAPACITY |
| 1 | ||
| 1785731 | RS Pro | PANEL PRINTER. THERMAL LINE. HIGH SPEED |
| 1 | ||
| 1785 | Edwards Signaling | SWITCH, PUSHBTN;WEATHERPROOF;EQUIPMENT SURFACE MOUNT;NO;GRAY |
| 0 | ||
| 1785 | Adafruit Industries | MEDIUM SURFACE TRANSDUCER WITH WIRES - 4 OHM 3 WATT |
| 0 | ||
 Microchip Technology Inc | TFS1785 | Microchip Technology Inc | TFS1785, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | ||
| MIC2178-5.0YWM | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC2178-5.0YWM-TR | Microchip Technology Inc | 2.5A 200kHz Synchronous Switcher, SOIC, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | 140-1785-02-01-00 | Cambion Electronics Ltd | RoHS : Compliant | 27,564 | ||
| NAS1785-4H25 | NAS Bolts | 507 | ||||
| 5178537-4 | Misc. Rods and Studs | 94 | ||||
| 217-859229 | Acme Industrial Company | 80 | ||||
| S235A178-5 | MISCELLANEOUS | 35 | ||||
| D791785 | Howmet Aerospace | 26 | ||||
| NAS1785-14-38 | NAS Bolts | 25 | ||||
| 217-859164 | Acme Industrial Company | 8 | ||||
| NAS1785-14-42 | NAS Bolts | 8 | ||||
| 140-1785-01-01-00 | Cambion Electronics Ltd | RoHS : Compliant | 7 | |||
| 217-859159 | Acme Industrial Company | 6 | ||||
| 71785 | Century Spring Corp | 5 | ||||
| 02-1785-000 | MISC. INDUSTRIAL CONNECTORS | 1 | ||||
| 02-1785-000 | MISCELLANEOUS | 1 | ||||
| NAS1785-5-12 | ESNA | 1 | ||||
 Rochester Electronics | LPC1785FBD208,551 | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 6,740 | |
| LPC1785FBD208K | NXP Semiconductors | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 256kB (256k x 8) 120MHz 208-QFP Tray RoHS : Compliant |
| 20,340 | ||
| 2SA1785E-AN | onsemi | Small Signal Bipolar Transistor, 1A I(C), 1-Element, PNP RoHS : Compliant |
| 7,500 | ||
| LT1785ACS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 34 | ||
| LT1785AIS8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC Tube RoHS : Compliant |
| 2 | ||
| LT1785ACN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 500 | ||
| LT1785AIN8#PBF | Analog Devices Inc | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-DIP Tube RoHS : Compliant |
| 35 | ||
| MAX17859ACB/V+CQP | Analog Devices Inc | 14 Channel High-Voltage Data-Acquisition | 130 | |||
| SN65HVD1785D | Texas Instruments | IC INTERFACE Transceiver RS422, RS485 115kbps 4.5V - 5.5V 8-SOIC Tube RoHS : Compliant |
| 16 | ||
| MIC2178-5.0BWM | Micrel Inc | Switching Regulator, Current-mode, 6A, 240kHz Switching Freq-Max, PDSO20 RoHS : Not Compliant |
| 13,219 | ||
| MIC2178-5.0YWM | Micrel Inc | Switching Regulator, Current-mode, 6A, 240kHz Switching Freq-Max, PDSO20 RoHS : Compliant |
| 5,798 | ||
 Sager | C12-X0-17-852-31A-MT | Carling Technologies | Circuit Breakers | 0 | ||
| 8862011785 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| IELHK111-31785-1-V | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| HPF17850PGDSNFAA01 | Honeywell Sensing and Control / Hobbs | Industrial Pressure Sensors Transportation Pressure Switches | 0 | |||
| HLCD-20-17.85-TR-BL-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | ||
| 651785-BB-0N-XTR1 | Carling Technologies | Rocker Switches | 0 | |||
| 2317857-2 | TE Connectivity | I/O Connectors DUST EMI PLUG PLATED OSFP RoHS : Compliant |
| 0 | ||
| 0636001785 | Molex | Molex | 0 | |||
| 0395178508 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 8CKT | 0 | |||
| 0395178510 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 10CK | 0 | |||
| 8508917856 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 2178511132 | Molex | Specialized Cables PERMA-S RING 150MM 16AWG M5 RoHS : Compliant |
| 0 | ||
| 0395178512 | Molex | Pluggable Terminal Blocks 3.81MM EURO PLUG VERT ME FWE GRN AU 12CK | 0 | |||
| 70220-1785 | OMRON Electronic Components | Specialty Controllers UMQ-4360-A | 0 | |||
| 817853-5 | TE Connectivity | Crimpers / Crimping Tools CRIMPER, INSUL. O .102 RoHS : Compliant | 0 | |||
 TME | 217851-1124 | Molex | PIN: 1; 600V; crimped; Plating: tinned; 16AWG; red |
| 250 | |
| 217-8524-240 | ITT Interconnect Solutions | Connector: circular |
| 76 | ||
| 1785942 | Phoenix Contact | Connector: pluggable terminal block; COMBICON M; 630V; PIN: 2; THT RoHS : Compliant |
| 48 | ||
| 1785968 | Phoenix Contact | Connector: pluggable terminal block; COMBICON M; 630V; PIN: 4; THT RoHS : Compliant |
| 35 | ||
| 217853-1000 | Molex | Antenna: communication; GPS,GSM,LTE,WiFi; 5.7dBi; linear; 50Ω |
| 3 | ||
| 817857-SF | TE Connectivity | Connector: AC supply; socket; male; Inom: 10A; Ir: 450uA; 250VAC |
| 0 | ||
| 3517853 | Gedore Torque Ltd | Tools set: screwdriver bits; L: 90mm; HEX 6mm; 2pcs. |
| 0 | ||
| 09178550 | GSR | Tap: metric; M12; fine thread,right hand thread; 1; L: 100mm; 7mm |
| 0 | ||
| 10178591 | Essentra Components | Washer; round; h=0.5mm; D=7mm; polyamide; natural |
| 0 | ||
| 1201785 | Phoenix Contact | Fixing element; L: 4.95mm; W: 9.9mm; H: 27.7mm; Body: silver RoHS : Compliant |
| 0 | ||
| 1785971 | Phoenix Contact | Connector: pluggable terminal block; COMBICON M; 630V; PIN: 5; THT RoHS : Compliant |
| 0 | ||
| SE-RG178-50110MG075 | Ingun Prufmittelbau GmbH | Connection cable; straight; 50Ω; 0.7GHz; 0.75m; SE-110 |
| 0 | ||
| 817859-SF | TE Connectivity | Connector: AC supply; socket; male; Inom: 2A; Ir: 0A; 250VAC; C14 (E) |
| 0 | ||
| 1-817854-9 | TE Connectivity | Tool: for crimping; Ocean |
| 0 | ||
| 1861785 | Phoenix Contact | Connector: pluggable terminal block; COMBICON S; 200V; PIN: 8; THT RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | SN65HVD1785DR | Texas Instruments | SN65HVD Series 3.3 to 5 V 0.115 Mb/s 6 mA Fault-Protected RS-485 Transceiver - SOIC-8 RoHS : Compliant | 5,000 | ||
 ComSIT USA | LT1785CS8TRPBF | Linear Technology | IC INTERFACE Transceiver RS422, RS485 250kbps 4.75V - 5.25V 8-SOIC T/R RoHS : Compliant | 1,485 | ||
| LFSPXO017856BULK | IQD Frequency Products | CRYSTAL OSC XO (Standard) HCMOS 33MHz 2.97V ~ 3.63V �100ppm 4-SMD RoHS : Compliant | 400 | |||
LT1785IS8 | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 350 | |||
| MAX17859ACBV+TCQP | Maxim Integrated Products | Multi-Cell Li-Ion Battery Pack Monitor, I�C interface, QFN-32, for battery management and protection applications RoHS : Compliant | 205 | |||
| 1785968V0 | Phoenix Contact | HEADER Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 150 | |||
| LT1785AIS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 103 | |||
| LT1785CS8PBF | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 87 | |||
| LT1785ACS8 | Linear Technology | 60V FAULT PROTECTED RS485/RS422 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Not Compliant | 33 | |||
 Interstate Connecting Components | MKJ1A1C17-85SAF0 | ITT Interconnect Solutions | MKJ1A1C17-85SAF0 RoHS : Compliant | 0 | ||
| MKJ1A1F17-85FA | ITT Interconnect Solutions | MKJ1A1F17-85FA RoHS : Compliant | 0 | |||
| MKJ1A26T17-85SAF0 | ITT Interconnect Solutions | MKJ1A26T17-85SAF0 RoHS : Compliant | 0 | |||
| MKJ1A26W17-85FA | ITT Interconnect Solutions | MKJ1A26W17-85FA RoHS : Not Compliant | 0 | |||
| MKJ1A2T17-85SA | ITT Interconnect Solutions | MKJ1A2T17-85SA RoHS : Compliant | 0 | |||
| MKJ1B1Z17-85SAF0 | ITT Interconnect Solutions | MKJ1B1Z17-85SAF0 RoHS : Compliant | 0 | |||
| MKJ1C2Z17-85BA-518 | ITT Interconnect Solutions | MKJ1C2Z17-85BA-518 | 0 | |||
| 801-004-07C17-85SN | Glenair Inc | 0 | ||||
| 801-007-16NF17-85SD | Glenair Inc | PLG BND PLTFRM 85#23 SKT Al/Cad RoHS : Not Compliant |
| 0 | ||
| 801-007-16ZNU17-85PD | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-008-16M17-85PE | Glenair Inc | RoHS : Compliant | 0 | |||
| 801-008-16NF17-85PD | Glenair Inc | PLG ACC THRD 85#23 PIN Al/Cad RoHS : Not Compliant |
| 0 | ||
| 801-008-16ZN17-85AC | Glenair Inc | RoHS : Not Compliant | 0 | |||
| 801-009-02C17-85AD | Glenair Inc | 0 | ||||
| 801-009-07M17-85SC | Glenair Inc | RoHS : Compliant | 0 | |||
 NexGen Digital | LT1785AIN8#PBF | Analog Devices Inc | RoHS : Compliant | 200 | ||
 PEI Genesis | 1785-6001 | Amphenol SV Microwave | RoHS : Compliant |
| 0 | |
| S1785-18100A-2 | SOURIAU-SUNBANK |
| 0 | |||
| 317-8513-000 | ITT Interconnect Solutions |
| 0 | |||
| S1785-1250-2 | SOURIAU-SUNBANK |
| 0 | |||
| S1785-1575-2 | SOURIAU-SUNBANK |
| 0 | |||
| 217-8536-120 | ITT Interconnect Solutions |
| 0 | |||
| S1785-1550-2 | SOURIAU-SUNBANK |
| 0 | |||
| S1785-1875-2 | SOURIAU-SUNBANK |
| 0 | |||
| 317-8578-001 | ITT Interconnect Solutions |
| 0 | |||
| 317-8588-000 | Sure Seal Connections |
| 0 | |||
| S1785-1850-2 | SOURIAU-SUNBANK |
| 0 | |||
| 217-8529-181 | ITT Interconnect Solutions |
| 0 | |||
| 217-8516-002 | ITT Interconnect Solutions |
| 0 | |||
| DRK178-5 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 217-8529-120 | ITT Interconnect Solutions |
| 0 | |||
 Powell Electronics | 2178506-3 | TE Connectivity | Terminals RoHS : Compliant |
| 10,560 | |
| 2317857-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 2,242 | ||
| 9-5178524-8 | TE Connectivity | Connectors |
| 475 | ||
| 2178531-1 | TE Connectivity | TE COMPONENT (REF 2178531-1) RoHS : Compliant |
| 190 | ||
| NB17852001 | TE Connectivity | Connectors RoHS : Compliant |
| 46 | ||
| 311785-000 | TE Connectivity | connector accessories |
| 17 | ||
| 801-007-16ZNU17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Not Compliant |
| 11 | ||
| 2M801-007-16NF17-85PB | Amphenol Corporation | M801 85C 85#23 PIN PLUG OM RoHS : Not Compliant |
| 7 | ||
| 801-010-07M17-85PB | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 7 | ||
| 3SBC1785A2 | CII Guardian | MIL/AERO RELAY 3SBC1785A2 |
| 6 | ||
| 801-009-07MT17-85SA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 5 | ||
| 801-008-16NF17-85PA | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Not Compliant |
| 4 | ||
| 801-008-26M17-85SB | Glenair Inc | CIRC MGHTY MSE (80/60) - CIRCULAR MIGHTY RoHS : Compliant |
| 2 | ||
| 817853-5 | TE Connectivity | Tools RoHS : Compliant |
| 1 | ||
| 817854-9 | TE Connectivity | CRIMPER, WIRE RoHS : Compliant |
| 1 | ||
 Richardson RFPD | DC1785B | Analog Devices Inc | LTC2991 Power Supply Controller and Monitor Demons RoHS : Compliant |
| 0 | |
| LT1785HS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785ACS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785ACS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785AIS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| 570AAA001785DGR | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±61.5ppm LVPECL 55% 3.3V 8 RoHS : Compliant |
| 0 | ||
| LT1785ACN8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin PD RoHS : Compliant |
| 0 | ||
| LT1785AHS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| 570ACA001785DGR | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±20ppm LVPECL 55% 3.3V 8-P RoHS : Compliant |
| 0 | ||
| A-1PA-178-500N2 | Amphenol Corporation | Cable Assembly Coaxial 0.5m AMC to AMC M-M Bag RoHS : Compliant |
| 0 | ||
| LT1785AIS8#TRPBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| LT1785CS8#PBF | Analog Devices Inc | Single Transmitter/Receiver RS-422/RS-485 8-Pin SO RoHS : Compliant |
| 0 | ||
| 570ACA001785DG | Skyworks Solutions Inc | Oscillator XO 19.982MHz ±20ppm LVPECL 55% 3.3V 8-P RoHS : Compliant |
| 0 | ||
| CVCO55BE1785190 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| A-1PA-178-500B2 | Amphenol Corporation | RF STD CABLE ASSY RoHS : Compliant | 0 | |||
 Rutronik | 17.17851.21 | 17 17851 21 DJET D6,35 MA-M AU RoHS : Compliant |
| 50 | ||
 Chip 1 Exchange | 1971785-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,453,080 | ||
| 1217853-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,081,600 | |||
| 2178531-1 | TE Connectivity | INSTOCK RoHS : Compliant | 30,351 | |||
| CXA1785ART4 | INSTOCK | 9,200 | ||||
| 5-104178-5 | TE Connectivity | INSTOCK RoHS : Compliant | 5,840 | |||
| 2317857-2 | TE Connectivity | INSTOCK RoHS : Compliant | 3,900 | |||
| OPB11785 | INSTOCK | 2,405 | ||||
| LT1785AIS8#PBF | INSTOCK | 514 | ||||
| ROS17851+ | INSTOCK | 500 | ||||
| CVCO55BE-1785-1900 | Cirrus Logic | INSTOCK | 286 | |||
| CVCO55BE-1785-1900 | INSTOCK | 286 | ||||
| LT1785ACS8#PBF | INSTOCK | 111 | ||||
| 60178-511 00/QUANTE-SID-P | 3M | INSTOCK | 59 | |||
| LT1785AIS8-PBF | LTECH | INSTOCK | 46 | |||
 Avnet Abacus | 1785942 | Phoenix Contact | Terminal Block Socket 508 mm 2 Ways 12 A 320 V Through Hole Vertical (Alt: 1785942) RoHS : Compliant | 150 | ||
| 1785955 | Phoenix Contact | Terminal Block Socket 508 mm 3 Ways 12 A 320 V Through Hole Vertical (Alt: 1785955) RoHS : Compliant | 100 | |||
| 1785984 | Phoenix Contact | Terminal Block Socket 508 mm 6 Ways 12 A 320 V Through Hole Vertical (Alt: 1785984) RoHS : Compliant | 50 | |||
| 1785968 | Phoenix Contact | Terminal Block Socket 508 mm 4 Ways 12 A 320 V Through Hole Vertical (Alt: 1785968) RoHS : Compliant | 50 | |||
| 20817858 | nVent Schroff | Trapezoid Form Extractor Handle Polyphenylene Ether (Alt: 20817858) RoHS : Compliant | 2 | |||
| 1117854 | Phoenix Contact | TFKC 25 4STF508 BD14 TFKC254STF508BD14 (Alt: 1117854) | 0 | |||
| 2317857-2 | TE Connectivity | Dust Cover for OSFP IO Connectors Zinc Alloy (Alt: 2317857-2) RoHS : Compliant | 0 | |||
| 2178531-1 | TE Connectivity | (Alt: 2178531-1) RoHS : Compliant | 0 | |||
| 1785-6001 | Amphenol Corporation | (Alt: 1785-6001) RoHS : Compliant | 0 | |||
| 2178506-3 | TE Connectivity | (Alt: 2178506-3) RoHS : Compliant | 0 | |||
| 637V17852I3T | CTS Corporation | - Tape and Reel (Alt: 637V17852I3T) RoHS : Compliant | 0 | |||
| 637E17853C2T | CTS Corporation | - Tape and Reel (Alt: 637E17853C2T) RoHS : Compliant | 0 | |||
| 653E17853C2T | CTS Corporation | - Tape and Reel (Alt: 653E17853C2T) RoHS : Compliant | 0 | |||
| 10178547-102LF | Amphenol Corporation | RotaSense 2 Position Temperature Sensor (Alt: 10178547-102LF) RoHS : Compliant | 0 | |||
| 801-011-07ZNU17-85SA | Glenair Inc | Conn Mighty Mouse SKT 85 POS Solder Cup ST Jam Nut 85 Terminal 1 Port (Alt: 801-011-07ZNU17-85SA) RoHS : Compliant | 0 | |||
Avnet Asia | 2-2071785-3 | TE Connectivity | ECK250BHDASA,05 (Alt: 2-2071785-3) RoHS : Compliant | 0 | ||
| 1SNA178529R0400 | TE Connectivity | (Alt: 1SNA178529R0400) RoHS : Compliant | 0 | |||
| 1971785-2 | TE Connectivity | (Alt: 1971785-2) RoHS : Compliant | 0 | |||
| 1971785-1 | TE Connectivity | Contact SKT Crimp ST Cable Mount (Alt: 1971785-1) RoHS : Compliant |
| 0 | ||
 Avnet Silica | LPC1785FBD208K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | ||
 Component Electronics, Inc | 178-511 | Spaenaur | IN STOCK SHIP TODAY | 1,000 | ||
| LT1785CS8#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 443 | ||
| LT1785IS8#PBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 1785955 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 17 | ||
| LT1785CS8 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
LT1785IN8 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| 10917856-1 | IN STOCK SHIP TODAY | 4 | ||||
| 150-1785-02 | Sun Microsystems Inc | IN STOCK SHIP TODAY | 1 | |||
| SN65HVD1785P | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 DB Roberts | SPL17857A | Spiralock | 7/8-14 SPL 4RS MP B TiN |
| 2 | |
| SPL17857LH | Spiralock | 7/8-14SPL LH 4StFl GP B NiT |
| 2 | ||
| M6178-5008-A | RAF Electronic Hardware | 0 | ||||
| AC-CAB1-7-1785-060 | Southco | 0 | ||||
| 551785 | Essentra Components | Rivet Based Spacer 22 mm Spacer Natural | 0 | |||
| 02910-11785 | Avdel | AVSEALII PLG 15.5MM ALST | 0 | |||
| M1178-5008-A | RAF Electronic Hardware | 0 | ||||
| 31785 | Essentra Components | 0 | ||||
| SPL17855A | Spiralock | 7/8-14 SPL3SP MP P TiN Standard New Taps | 0 | |||
| 17W01785B | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
| 17W01785 | Essentra Components | FLAT WASHER, .110 ID, .170 OD, | 0 | |||
| 461785 | Essentra Components | 0 | ||||
| 1785-832-SS | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | MIC2178-5.0YWM | Microchip Technology Inc | 25A 200KHZ SYNCHRONOUS SWITCHER (Alt: MIC2178-5.0YWM) RoHS : Compliant | 0 | ||
| LPC1785FBD208K | NXP Semiconductors | ARM MCU LPC Family LPC1700 Series Microcontrollers ARM CortexM3 32 bit 120 MHz 256 KB (Alt: LPC1785FBD208K) RoHS : Compliant | 0 | |||
 FDH Electronics | 801-069-26M17-85PA613 | Glenair Inc | Circular Conn | 6 | ||
| 801-008-16NF17-85PD | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-010-02M17-85PA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-011-22M17-85SA | Glenair Inc | Circular Conn RoHS : Compliant | 0 | |||
| 801-007-26M17-85SA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-009-07NF17-85GA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-009-07ZNU17-85PA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-007-16ZN17-85SD | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-007-26M17-85SB | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-010-01NF17-85PA | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-007-16M17-85SD | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-007-16ZN17-85PD | Glenair Inc | Connector RoHS : Not Compliant | 0 | |||
| 801-007-26M17-85PB | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-011-07ZNU17-85SA | Glenair Inc | Connector RoHS : Compliant | 0 | |||
| 801-009-07M17-85PC | Glenair Inc | Connector RoHS : Compliant | 0 | |||
 Flip Electronics | LPC1785FBD208,551 | NXP Semiconductors | Stock RoHS : Compliant |
| 1,872 | |
 Maritex | 1971785-1 | TE Connectivity | Rectangular Connector Contacts; 1971785-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 24 AWG RoHS : Compliant |
| 29,267 | |
 Master Electronics | CT317-8531-001 | ITT Interconnect Solutions | Ad |Itt Cannon 317-8531-001 RoHS : Compliant |
| 0 | |
| CT317-8578-000 | ITT Interconnect Solutions | Cge Crimp Die H24 RoHS : Not Compliant |
| 0 | ||
| MIC2178-5.0YWM | Microchip Technology Inc | Conv DC-DC 4.5V to 16.5V Synchronous Step Down Single-Out 5V 2.5A 20-Pin SOIC W Tube RoHS : Compliant |
| 0 | ||
| MKJ1A1C17-85SAF0 | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Anodized Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1A1F17-85FA | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1A26T17-85PB | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MKJ1A26T17-85SAF0 | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Teflon Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1A26W17-85FA | ITT Interconnect Solutions | Connector Miniature Circular Socket 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Not Compliant |
| 0 | ||
| MKJ1A2F17-85PF | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Zinc Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1A2T17-85SA | ITT Interconnect Solutions | Connector Circular Housing PIN 3 Position 5 Shell Size Electroless Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1A7W17-85PF | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Teflon Nickel Plated Aluminum RoHS : Not Compliant |
| 0 | ||
| MKJ1A7Z17-85SD | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Crimp Straight Jam Nut 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B1F17-85SC | ITT Interconnect Solutions | Connector Miniature Circular PIN 85 Position Solder Cup Straight Cable Mount 85 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| MKJ1B1Z17-85SAF0 | ITT Interconnect Solutions | Connector Circular Housing Socket 85 Position 17 Shell Size Zinc Nickel Plated Aluminum RoHS : Compliant |
| 0 | ||
| MKJ1B26W17-85PB | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
 Neutron USA | 1785029 | RS Pro | Multi Function 4PDT Timer Relay 12-240VAC/VDC Screw Terminal DIN Rail Mount |
| 15 | |
| 1421785 | Phoenix Contact | Heavy Duty Power Connectors CUC-PPC-C2ZNI-SS/ 24FKP5 RoHS : Compliant |
| 8 | ||
| 1471785 | Phoenix Contact | Enclosures, Boxes, & Cases OCS PANEL 1008 PC |
| 7 | ||
| 1641785 | Phoenix Contact | Circular Metric Connectors M12 SENSOR PLG 4P RoHS : Compliant |
| 0 | ||
| 881785-B21-AX | Axiom Manufacturing | 12TB 6GB/S SATA 7 2K RPM LFF 3 5IN ENTERPRISE HDD |
| 0 | ||
| 1785984 | Phoenix Contact | Pluggable Terminal Blocks 6 Pos 5.08mm pitch Thru Hole Invert Hdr RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W17854 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 390 | ||
| PE3W17857-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857-50CM can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857-50CM can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17857-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. NEX10 Male to NEX10 Female Bulkhead Low PIM Cable 12 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female bulkhead low PIM cable 12 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 bulkhead cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17857-12 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17857-12 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17857-12 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17857-12 can also be used in the other direction and will be NEX10 female bulkhead to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 149 | ||
| PE3W17854-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Male Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-60 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17854-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. NEX10 Male to NEX10 Male Low PIM Cable 50 CM Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 50 cm length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 50 cm length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17854-50CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17854-50CM RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 plug cable assembly PE3W17854-50CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 78 | ||
| PE3W17856-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male to NEX10 Female Low PIM Cable 60 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 60 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 60 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856-60 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856-60 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856-60 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856-60 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | ||
| PE3W17856-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male to NEX10 Female Low PIM Cable 36 Inch Length Using SPF-250 Coax., Radio frequency assembly NEX10 male to NEX10 female low PIM cable 36 inch length using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 female low PIM cable 36 inch length using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17856-36 can also be known as a low PIM NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17856-36 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17856-36 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17856-36 can also be used in the other direction and will be NEX10 female to NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 44 | ||
| PE3C6178-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum Snap-On 4.3-10 Male to Snap-On 4.3-10 Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310MS-LP 4.3-10 cable connection on one end and TC-SPP250-4310MS-LP 4.3-10 cable connection on the other. Our low PIM TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable is a male to male coax assembly, PE3C6178-50CM, can also be known as a low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly PE3C6178-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310MS-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310MS-LP 4.3-10 male to TC-SPP250-4310MS-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP250-4310MS-LP 4.3-10 plug to TC-SPP250-4310MS-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310MS-LP 4.3-10 to TC-SPP250-4310MS-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310MS-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum snap-on 4.3-10 male to snap-on 4.3-10 male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 37 | ||
| PE517852 | Pasternack Enterprises | Key Specifications. Polarity Standard Connector Series Mini SMP Connector Gender Male Impedance 50 Ohm Body Style Straight Attachment Method Solder Mount Method Surface Mount Minimum Frequency DC Maximum Frequency 67 GHz. Mini SMP Male Smooth Bore Connector Solder Attachment Surface Mount PCB, Up to 67.0 GHz. Pasternack's PE517852 Mini SMP Male Smooth Bore Connector Solder Attachment is part of our full line of RF components available for same-day shipping. Our Mini SMP male connector operates up to a maximum frequency of 67 GHz and offers good VSWR of 1.93:1. The Pasternack blind mate connector is ideal for applications where direct visual or tactile access to the connection point is not possible, for example, when two circuit boards need to be mated. Our Mini SMP male surface mount connector PE517852 datasheet specifications and drawing with dimensions are shown below in this PDF. Pasternack’s broad catalog of RF, microwave and millimeter wave connectors allows designers to configure and customize their signal connections however they like. Whether the need is to provide an I/O for a board design, or simply create a custom cable assembly configuration, Pasternack has the right connector for the job. Pasternack can also expertly build your custom cable assemblies for you and ship same-day. |
| 7 | ||
| PE3W17851-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. NEX10 Male to NEX10 Male Low PIM Cable 24 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 24 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 24 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851-24 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851-24 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851-24 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17859 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm. NEX10 Male Right Angle to NEX10 Female Low PIM Cable Using SPF-250 Coax., Radio frequency assembly NEX10 male right angle to NEX10 female low PIM cable using SPF-250 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 female low PIM cable using SPF-250 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to a NEX10 cable assembly has male gender on end 1 and female on end 2. PE3W17859 can also be known as a low PIM right angle NEX10 plug to NEX10 jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17859 RF cable has a FRPE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. NEX10 plug to NEX10 jack cable assembly PE3W17859 is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated NEX10 cable assembly is manufactured with right angle NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W17859 can also be used in the other direction and will be NEX10 female to right angle NEX10 male cable assembly if the opposite connectivity is required. Low PIM NEX10 right angle plug to NEX10 jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W17851 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. NEX10 Male to NEX10 Male Low PIM Cable Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17851 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17851 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17851 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. | 0 | |||
| PE3W11785 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Female to SMA Female Cable Using RG142 Coax. PE3W11785 is a N female to SMA female cable using RG142 coax. This Pasternack N female to SMA female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11785 N female to SMA female cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W17853-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 60 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 60 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17853-60 can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17853-60 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17853-60 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W17853-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. NEX10 Male Right Angle to NEX10 Male Right Angle Low PIM Cable 36 Inch Length Using TFT-5G-402 Coax., Radio frequency assembly NEX10 male right angle to NEX10 male right angle low PIM cable 36 inch length using TFT-5G-402 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male right angle to NEX10 male right angle low PIM cable 36 inch length using TFT-5G-402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with right angle a NEX10 cable connection on one end and right angle a NEX10 cable connection on the other. Our low PIM right angle a NEX10 to right angle a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3W17853-36 can also be known as a low PIM right angle NEX10 plug to right angle NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. Our PE3W17853-36 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. NEX10 plug to NEX10 plug cable assembly PE3W17853-36 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with right angle NEX10 to right angle NEX10 cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 right angle plug to NEX10 right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 1971785-2 | TE Connectivity | PTL RECEPTACLE CONTACT, 20 - 24 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 20 AWG Operating Voltage: 600 VAC Tin (Sn) Receptacle Pre-Tin 24 – 20 AWG | Receptacle Contact — Power Triple Lock | Part Number: 1971785-2 | Internal Number: 1971785-2 | TE Connectivity RoHS : Compliant |
| 36,729 | |
| 1971785-1 | TE Connectivity | PTL RECEPTACLE CONTACT, 20 - 24 AWG Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 20 AWG Operating Voltage: 600 VAC Tin (Sn) Receptacle Pre-Tin 24 – 20 AWG | Receptacle Contact — Power Triple Lock | Part Number: 1971785-1 | Internal Number: 1971785-1 | TE Connectivity RoHS : Compliant |
| 11,122 | ||
| 5-104178-5 | TE Connectivity | 08 SYS 50 HDR SRST UNSHRD SN Part Number: 5-104178-5 | Internal Number: 5-104178-5 | TE Connectivity RoHS : Compliant |
| 3,765 | ||
| 2178531-1 | TE Connectivity | CROWN CLIP JUNIOR CONNECTOR Connector System: Board-to-Bus Bar Number of Positions: 1 Connector & Contact Terminates To: Printed Circuit Board Mating Conductor Thickness: .118 in Mating Conductor Thickness: 3 mm Board-to-Bus Bar 1 Printed Circuit Board .118" | Busbar Connector | Part Number: 2178531-1 | Internal Number: 2178531-1 | TE Connectivity RoHS : Compliant |
| 26 | ||
| 1SNA178529R0400 | TE Connectivity | PR50 Mounting & Retention Accessory Type: Module Block/Mounting Rail Assembly Product Length: .59 in Product Length: 15 mm Operating Temperature Range: -67 – 221 °F Operating Temperature Range: -55 – 105 °C Module Block/Mounting Rail Assembly .59" | Terminal Block & Strip Mounting & Retention Accessories | Part Number: 1SNA178529R0400 | Internal Number: 1SNA178529R0400 | TE Connectivity RoHS : Compliant |
| 11 | ||
 Venkel Ltd. | PWCR1206-UK-1785DT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | ||
| PWCR2010-WK-1785FT | VENKEL LTD | Pulse Withstanding CR;2010;3/4W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0805-8W-1785FT | VENKEL LTD | Chip Resistor;0805;1/8W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1210-VK-1785DT | VENKEL LTD | Pulse Withstanding CR;1210;1/2W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-1785FT | VENKEL LTD | Chip Resistor;0805;1/10W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR1206-UK-1785FT | VENKEL LTD | Pulse Withstanding CR;1206;1/3W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0603-10W-1785FT | VENKEL LTD | Chip Resistor;0603;1/10W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR1210-4W-1785FT | VENKEL LTD | Chip Resistor;1210;1/4W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR0805-RK-1785DT | VENKEL LTD | Pulse Withstanding CR;0805;1/8W;�100PPM;17.8M;�0.5% RoHS : Compliant | 0 | |||
| CR0402-16W-1785FT | VENKEL LTD | Chip Resistor;0402;1/16W;17.8M;�1% RoHS : Compliant | 0 | |||
| HVCR2512-1W-1785FT | VENKEL LTD | High Voltage CR;2512;1W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR2010-2W-1785FT | VENKEL LTD | Chip Resistor;2010;1/2W;17.8M;�1% RoHS : Compliant | 0 | |||
| CR1206-8W-1785FT | VENKEL LTD | Chip Resistor;1206;1/8W;17.8M;�1% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1785FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;17.8M;�1% RoHS : Compliant | 0 | |||
| CR0603-16W-1785FT | VENKEL LTD | Chip Resistor;0603;1/16W;17.8M;�1% RoHS : Compliant | 0 | |||
 Vyrian | 801-011-07ZNU17-85SA | Glenair Inc | Circular Connector, 85 Contact(s), Aluminum Alloy, Female, Solder Terminal, Receptacle RoHS : Compliant | 13,528 | ||
| MAX17851EVKIT | Analog Devices (Maxim Integrated) | 12,269 | ||||
| MAX31785ETL | Analog Devices (Maxim Integrated) | 12,047 | ||||
| DC1785B | Analog Devices Inc | 11,531 | ||||
| LT1785AIS8-PBF | Analog Devices Inc | 10,429 | ||||
| LT1785AIS8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 10,177 | |||
| 801-009-07MT17-85SA | Glenair Inc | MIL Series Connector, 85 Contact(s), Aluminium Alloy, Female, Crimp Terminal, Receptacle RoHS : Compliant | 10,027 | |||
| MAX31785ETL+ | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 7,433 | |||
| LT1785ACS8#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 7,138 | |||
| MAX17852ACB/V+ | Analog Devices Inc | Power Supply Management Circuit RoHS : Compliant | 6,681 | |||
| LT1785CN8-PBF | Analog Devices Inc | 6,412 | ||||
| MAX17853GCB-V | Analog Devices (Maxim Integrated) | 6,060 | ||||
| LT1785HS8#TRPBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 5,968 | |||
| LT1785ACS8#PBF | Analog Devices Inc | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO8 RoHS : Compliant | 5,437 | |||
| LT1785AIN8 | Linear Technology | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDIP8 RoHS : Not Compliant | 746 | |||
 Win Source Electronics | LT1785AIS8 | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 15,515 | |
| LT1785AIS8#TRPBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 15,515 | ||
| LT1785IS8 | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 14,562 | ||
| LT1785AIS8#PBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 14,200 | ||
| SN65HVD1785D | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC RoHS : Compliant |
| 10,000 | ||
| SN65HVD1785DRG4 | Texas Instruments | 70-V Fault-Protected RS-485 Transceivers RoHS : Compliant |
| 9,490 | ||
| SN65HVD1785DR | Texas Instruments | IC FAULT-PROT RS485 TXRX 8-SOIC RoHS : Compliant |
| 9,120 | ||
| LT1785CS8 | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 5,000 | ||
| LT1785CS8#PBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,740 | ||
| LT1785CS8#TRPBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,710 | ||
| LT1785IS8#TRPBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,670 | ||
| LT1785IS8#PBF | Linear Technology | IC TXRX RS485/RS422 60V 8-SOIC RoHS : Compliant |
| 4,280 | ||
| LT1785ACS8 | Linear Technology | 60V Fault Protected RS485/RS422 Transceivers RoHS : Not Compliant |
| 533 | ||
| LT1785ACS8#PBF | Linear Technology | IC TXRX 60V RS485/RS422 8SOIC RoHS : Compliant |
| 490 | ||
| LT1785ACS8#TRPBF | Linear Technology | IC TXRX 60V RS485/RS422 8SOIC RoHS : Compliant |
| 490 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand