 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1730SLASHBASIC nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | HCPL-817-30DE | Broadcom Limited | Optocoupler 1-CH Open Collector-OUT 5000Vrms 4-Pin SMD DIP Tube - Rail/Tube (Alt: HCPL-817-30DE) RoHS : Compliant |
| 26,737 | |
| SLG59M1730C | Renesas Electronics Corporation | - Tape and Reel (Alt: SLG59M1730C) RoHS : Compliant |
| 6,000 | ||
| CNY17-3-000E | Broadcom Limited | Optocoupler, Transistor Output, 1 Channel, DIP, 6 Pins, 60 mA, 5 kV, 100 % - Rail/Tube (Alt: CNY17-3-000E) RoHS : Compliant |
| 5,624 | ||
| 22-17-3032 | Molex | PCB Receptacle, 3 Contacts, 1 Row, 2.54mm, Gold, 2.5A, THT, Straight, Brass, Board-to-Board, Solder - Trays (Alt: 0022173032) RoHS : Compliant |
| 4,117 | ||
| 55917-3010 | Molex | Pin Header, 30 Contacts, 2 Rows, 2mm, Tin, 3A, Straight, Shrouded, Brass, Wire-to-Board, THT - Trays (Alt: 0559173010) RoHS : Compliant |
| 1,950 | ||
| 348A1730P6 REV P | Amphenol Corporation | CONNECTOR, ELECTRICAL, CIRCULAR, RECEPTACLE - Bulk (Alt: 348A1730P6 REV P) RoHS : Not Compliant | 19 | |||
| 217-3027-000 | ITT Interconnect Solutions | J/N 07 10 KPT - Bulk (Alt: 217-3027-000) RoHS : Not Compliant |
| 0 | ||
| 1661730000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1661730000) RoHS : Compliant |
| 0 | ||
| 1730580004 | Weidmüller Interface GmbH & Co. KG | SlimFix Conductor and Cable Marker 21mm x 3.2mm Polyamide 66 Yellow - Bulk (Alt: 1730580004) RoHS : Not Compliant |
| 0 | ||
| 151117-3044 | Molex | Pin Header, 44 Contacts, 2 Rows, 2mm, Tin, 2A, Straight, Shrouded, Copper Alloy, Wire-to-Board, THT - Bulk (Alt: 1511173044) RoHS : Compliant |
| 0 | ||
| 1173030140 | Weidmüller Interface GmbH & Co. KG | IE-C5DD4UG0140A20A20-E - Bulk (Alt: 1173030140) RoHS : Not Compliant |
| 0 | ||
| 1-730225-2 | TE Connectivity | Anvil for Ocean Feed Applicator - Boxed Product (Development Kits) (Alt: 1-730225-2) RoHS : Not Compliant |
| 0 | ||
| 51730-007LF | Amphenol Corporation | - Trays (Alt: 51730-007LF) RoHS : Compliant |
| 0 | ||
| R417306130 | Radiall | - Bulk (Alt: R417306130) RoHS : Not Compliant |
| 0 | ||
| NEX91730PB-Q100Y | Nexperia | LDO Voltage Regulator, Adjustable, 4V to 40 V in, 440 mV Drop, 2V to 40V/0.3A Out, HSOIC-EP-8 - Tape and Reel (Alt: NEX91730PB-Q100Y) RoHS : Compliant |
| 0 | ||
 Newark | UDZVFHTE-1730B | ROHM Semiconductor | Zener Diode, 30V, Sod-323Fl; |Rohm UDZVFHTE-1730B RoHS : Compliant |
| 10,095 | |
| UDZVFHTE-1730B | ROHM Semiconductor | Zener Diode, 30V, Sod-323Fl; |Rohm UDZVFHTE-1730B RoHS : Compliant |
| 10,095 | ||
| CNY17-3-000E | Broadcom Limited | Optocoupler, 1-Ch, Dip, 6Pins; |Broadcom CNY17-3-000E RoHS : Compliant |
| 6,098 | ||
| BH1730FVC-TR | ROHM Semiconductor | Ambient Light Sensor Ic, I2C, Serial; |Rohm BH1730FVC-TR RoHS : Compliant |
| 2,909 | ||
| 17-300020 | Amphenol CONEC | Adapter, Fiber Optic, Conec 17-300020; |Amphenol Conec 17-300020 RoHS : Compliant |
| 586 | ||
| NEX91730PB-Q100Y | Nexperia | Ldo, Adj, 2 To 40V, 0.3A, Hsoic-Ep-8; |Nexperia NEX91730PB-Q100Y RoHS : Not Compliant |
| 250 | ||
| NEX91730PB-Q100Y | Nexperia | Ldo, Adj, 2 To 40V, 0.3A, Hsoic-Ep-8; |Nexperia NEX91730PB-Q100Y RoHS : Not Compliant |
| 250 | ||
| TSW-117-30-T-D | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 34Pos; |Samtec, Inc. TSW-117-30-T-D RoHS : Compliant |
| 191 | ||
| M80-4173098 | Harwin | Wtb Housing Connector, 30Pos, 2Row, 2Mm; |Harwin M80-4173098 RoHS : Compliant |
| 128 | ||
| 860131173002 | Wurth Elektronik | Cap, 2.2Uf, 250V, Alu Elec, Radial; |Würth Elektronik 860131173002 RoHS : Compliant |
| 106 | ||
| 01730 | Wiha Quality Tools | Hex Bit, Torx T/Proof T25X25Mm; |Wiha 01730 RoHS : Compliant |
| 9 | ||
| 1561730000 | Weidmüller Interface GmbH & Co. KG | Tb Barrier, Panel, 202A, 1Kv, 2 Pole; |Weidmuller 1561730000 RoHS : Compliant |
| 1 | ||
| FMHR0117-30 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 30", 762Mm, Rg58; |Fairview Microwave FMHR0117-30 RoHS : Not Compliant |
| 1 | ||
| 1730 | Adafruit Industries | Flex Cable For Raspberry Pi Camera Or Display - 18/457Mm |Adafruit 1730 RoHS : Not Compliant |
| 0 | ||
| 1730 | Molex | Electrical Ac Adapter, 15A, 125V; Series |Molex 1730 RoHS : Not Compliant |
| 0 | ||
 RS | 1730 | Heyco | STRAIN RELIEF BUSHING, .875", .125" PANEL THICKNESS, BLACK RoHS : Compliant |
| 1,489 | |
| 6173097 | RS Pro | PIEZO BUZZER 96DB 2300-3300HZ PANEL MOUNT 1.5-20VDC CONTINUOUS INTERNAL |
| 201 | ||
| 09205101541 (7.30921E+12) | HARTING Technology Group | HOOD HAN 10A SIDE-ENTRY SINGLE LEVERPEG, HAN A SERIES |
| 63 | ||
| AJT10ID (Y217302) | Mersen Electrical Power | FUSE, TIME-DELAY, CLASS J, VISUAL INDICATOR, 200KA AC/100KA DC, 600VAC, 10A |
| 53 | ||
| 1SNA173059R0300 (017305903) | TE Connectivity | DCJ YELLOW TEST DEVICE, ENTRELEC |
| 19 | ||
| 471730 | RS Pro | Z24 V-BELT SECTION Z PET RUBBER DRIVE BELT 10MM W X 6MM H X 610MM L |
| 15 | ||
| 1SNA173060R0000 (017306000) | TE Connectivity | DCO TEST ADAPTERS ORANGE |
| 7 | ||
| 09151173001 | HARTING Technology Group | HAN M23 SIGNAL, 17PIN MALE CRIMP INSERT (FOR 17 1MM CONTACTS) RoHS : Compliant |
| 4 | ||
| IA26S (17301) | Banner Engineering Corp | FIBER OPTICS, PLASTIC FIBER, DIFFUSE, LENGTH 2M, FERRULE |
| 4 | ||
| RK 4.4T-6-RS 4.4T/S101 (U2173-03) | TURCK Inc | DOUBLE ENDED IN-SERIES CORDSET, M12 MALE TO M12 FEMALE, 6 M, EUROFAST SERIES |
| 3 | ||
| 51730050 | Lapp Group | REDUCERS, SKINDICHT KU PG, PG 29, PG 16, POLYAMIDE, LIGHT GREY RoHS : Compliant |
| 2 | ||
| 8417305 | RS Pro | EQUIPMENT HOOK-UP WIRE, BLACK PTFE BS3G210 19X0.2MM CSA 100M (328FT) |
| 1 | ||
| M9F17304 | Schneider Electric | MINIATURE CIRCUIT BREAKER 277/415V 4A |
| 1 | ||
| 09300161730 | HARTING Technology Group | CONNECTOR, POWER, HEAVY DUTY, 16B CBL TO CBL PG 21 METAL 2 LEVERS RoHS : Compliant |
| 1 | ||
| 1730 | Adafruit Industries | FLEX CABLE FOR RASPBERRY PI CAMERA - 18 / 457MM |
| 0 | ||
 Microchip Technology Inc | TC1017-3.0VLTTR | Microchip Technology Inc | 80 mA Tiny CMOS w/Shutdown, SC70, Projected EOL: 2036-06-03 RoHS : Compliant |
| 63,000 | |
| TC1017-3.0VCTTR | Microchip Technology Inc | 150mA CMOS LDO with Shutdown, SOT-23, Projected EOL: 2036-07-29 RoHS : Compliant |
| 42,000 | ||
MIC5317-3.0YMT-TZ | Microchip Technology Inc | Single, High Performance 150mA LDO, UDFN, Projected EOL: 2041-01-14 RoHS : Compliant |
| 35,837 | ||
TC2117-3.0VDBTR | Microchip Technology Inc | 800mA Fixed Low Dropout Positive Regulator, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 11,667 | ||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | Single, High Performance 150mA LDO, SOT-23, Projected EOL: 2041-01-09 RoHS : Compliant |
| 6,000 | ||
| MD1730-V/M2 | Microchip Technology Inc | 8-channel low phase noise CW transmit with digital phase delay for CW beamform, SQFN, Projected EOL: 2046-10-26 RoHS : Compliant |
| 1,049 | ||
| MIC5317-3.0YD5-TR | Microchip Technology Inc | Single, High Performance 150mA LDO, TSOT, Projected EOL: 2041-01-09 RoHS : Compliant |
| 944 | ||
| 107-00173-000 | Microchip Technology Inc | PROGRAMMED SSD CARD FOR ATS 6031A, Projected EOL: 2051-03-25 - Contact for Pricing | 0 | |||
| MIC5317-3.0YMT-T5 | Microchip Technology Inc | Single, High Performance 150mA LDO, UDFN, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MD-173-0012-10M0000000 | Microchip Technology Inc | MD-173-0012-10M0000000, Projected EOL: 2051-05-18 - Contact for Pricing | 0 | |||
| MD-173-0013-10M0000000 | Microchip Technology Inc | MD-173-0013-10M0000000, Projected EOL: 2051-03-02 - Contact for Pricing | 0 | |||
| PX-706-0017-300M000000 | Microchip Technology Inc | PX-706-0017-300M000000, Projected EOL: 2051-10-04 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| MD-1730-DAJ-6001-10M0000000 | Microchip Technology Inc | MD-1730-DAJ-6001-10M0000000, Projected EOL: 2050-11-17 - Contact for Pricing RoHS : Compliant | 0 | |||
| OH-1730-BEX-1083-10M0000000 | Microchip Technology Inc | OH-1730-BEX-1083-10M0000000, Projected EOL: 2051-10-23 - Contact for Pricing | 0 | |||
 Bisco Industries | 5702-217-30 | Seastrom Mfg | 3,748 | |||
| 5710-17-30-P | Seastrom Mfg | 3,363 | ||||
| 5710-617-30 | Seastrom Mfg | 2,500 | ||||
| 7717-30N | BOYD Laconia | 2,237 | ||||
| 3117-3-00-15-00-00-08-0 | Mill-Max Mfg Corp | RoHS : Compliant | 887 | |||
| WS-0344-0173-0375 | Volt Industrial Plastics | 815 | ||||
| 2317-3-00-50-00-00-07-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 265 | |||
| 617300 | MISC. INDUSTRIAL CONNECTORS | 88 | ||||
| 1730 | Heyco | RoHS : Compliant | 58 | |||
| 10-917-3-04 | Staffall | 20 | ||||
| M2117-3005-SS-20 | RAF Electronic Hardware | 7 | ||||
| AS5173�0804 | Pamco Precision Aircraft Machining Company | 3 | ||||
| 12-117-3-01 | Staffall | 3 | ||||
| A1017-30 | Staffall | 3 | ||||
| AN17-30 | NEW SURPLUS CELL 10 | 2 | ||||
 Rochester Electronics | PXN017-30QLJ | NXP Semiconductors | MOSFET N-Channel 30V 7.9A (Ta), 20A (Tc) 8-SON T/R RoHS : Compliant |
| 110 | |
| 2SA1730S-TD-E | onsemi | Bipolar PNP Transistor, 3A 40V RoHS : Compliant |
| 6,894 | ||
| FOD817300W | onsemi | Opto-coupler 5kVrms Transistor 4-DIP Box RoHS : Compliant |
| 2,000 | ||
| AD42/173-0 | Analog Devices Inc | I.C. 16-Bit ADC IC |
| 4,826 | ||
SN751730DE4 | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 3 Rcvr, BIPolar, PDSO16 RoHS : Compliant |
| 103 | ||
PCM1730E | Texas Instruments | D/A Converter, 1 Func, Serial Input Loading, PDSO28 RoHS : Compliant |
| 11,245 | ||
TLV71730PDQNT | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 150mA 4-SON T/R RoHS : Compliant |
| 9,250 | ||
| TLV71730PDQNR | Texas Instruments | IC VOLT REG Fixed 1 REG 3V 150mA 4-SON T/R RoHS : Compliant |
| 986 | ||
CSD17303Q5 | Texas Instruments | Power Field-Effect Transistor, 100A I(D), 30V, 0.0037ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant |
| 6,085 | ||
CSD17301Q5A | Texas Instruments | MOSFET N-Channel 30V 28A (Ta), 100A (Tc) 8-SON T/R RoHS : Compliant |
| 346 | ||
| SN751730NS | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 3 Rcvr, BIPolar, PDSO20 RoHS : Compliant |
| 742 | ||
| FOD817300 | Fairchild Semiconductor Corporation | Opto-coupler 5kVrms Transistor 4-DIP Box RoHS : Compliant |
| 81,515 | ||
| FOD817300W | Fairchild Semiconductor Corporation | Opto-coupler 5kVrms Transistor 4-DIP Box RoHS : Compliant |
| 3,554 | ||
| H11A817300 | Fairchild Semiconductor Corporation | Opto-coupler 5.3kVrms Transistor 4-DIP Tube RoHS : Compliant |
| 1,535 | ||
| CSD17303Q5 | National Semiconductor Corporation | Power Field-Effect Transistor, 100A I(D), 30V, 0.0037ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant |
| 1,490 | ||
 Sager | 20015173-00 | TE Connectivity | TE Connectivity 4810A-010-D RoHS : Compliant |
| 0 | |
| 2173046-4 | TE Connectivity | DIN 41612 Connectors 64P.IEC-C FEM.CONN. | 0 | |||
| 1730830006 | Molex | Board to Board & Mezzanine Connectors KK 508 Pol Vert Hdr GW 06 ckt Tin RoHS : Compliant | 0 | |||
| 1511173072 | Molex | MGRID SHRD HDR TH W/PEG 2.5SNLF 22CKT RoHS : Compliant |
| 0 | ||
| 1-730225-2 | TE Connectivity | Other Tools ANVIL, COMBINATION |
| 0 | ||
| S1SS-17-30-T-06.00-D-NUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| SFSD-17-30-G-18.00-D-NUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| AP105-GT17-30S(65) | Hirose Electric Co Ltd | Crimpers / Crimping Tools TOOL APP GT17 ACCESSORY | 0 | |||
| 0010173075 | Molex | Molex | 0 | |||
| CX1173-000 | TE Connectivity | TE Connectivity 55PC0233-18-3/6/9CS2958 |
| 0 | ||
| FW-09-04-G-D-173-065 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APH-1730-T-H | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| T1730163132-000 | TE Connectivity | Heavy Duty Power Connectors H16B-TBF-LB-M32 RoHS : Compliant |
| 0 | ||
| T1730242125-000 | TE Connectivity | Heavy Duty Power Connectors H24B-TBF-LB-M25 RoHS : Compliant |
| 0 | ||
| 2011730022 | Molex | SLIMGRID SHRD HDR RA SMT 0.05AULF 22CKT RoHS : Compliant | 0 | |||
 TME | 0252111730 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: L3; 1.3÷3mm; PVC; yellow; leaded; CLI C RoHS : Compliant |
| 600 | |
| 1730720000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; 10A,14A; 400V RoHS : Compliant |
| 90 | ||
| 09120173001 | HARTING Technology Group | Connector: HDC; contact insert; male; 10A; 500V; Han Q; PIN: 18 RoHS : Compliant |
| 6 | ||
| 1231730000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; female; power supply; 17.5A RoHS : Compliant |
| 0 | ||
| 1511730025 | Weidmüller Interface GmbH & Co. KG | PAC |
| 0 | ||
| 17-300080 | Amphenol CONEC | Connector: fiber optic; plug; data transfer; for strain relief |
| 0 | ||
| 17-300120 | Amphenol CONEC | Connector: fiber optic; plug; data transfer; for strain relief |
| 0 | ||
| 17-300940 | Amphenol CONEC | Connector: fiber optic; data transfer; silver; straight |
| 0 | ||
| 1730052 | Phoenix Contact | Connector: PCB terminal block; power supply; 17.5A; 400V; PIN: 6 RoHS : Compliant |
| 0 | ||
| 1730133 | Phoenix Contact | Connector: PCB terminal block; power supply; 17.5A; 400V; PIN: 3 RoHS : Compliant |
| 0 | ||
| 1730214 | Phoenix Contact | Connector: PCB terminal block; power supply; 17.5A; 400V; PIN: 11 RoHS : Compliant |
| 0 | ||
| 1730421 | Phoenix Contact | Connector: PCB terminal block; power supply; 24A; 400V; PIN: 5 RoHS : Compliant |
| 0 | ||
| 1730502 | Phoenix Contact | Connector: PCB terminal block; power supply; 24A; 400V; PIN: 2 RoHS : Compliant |
| 0 | ||
| 1730580001 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: empty; 1÷1.3mm; polyamide 66; white; leaded RoHS : Compliant |
| 0 | ||
| 1730590005 | Weidmüller Interface GmbH & Co. KG | Marker: cable; Marking: empty; 1.2÷1.6mm; polyamide 66; green RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TLV71730PDQNR | Texas Instruments | IC REG LDO 3V 0.15A 4X2SON RoHS : Compliant | 284,716 | ||
| TLV71730PDQNT | Texas Instruments | IC REG LDO 3V 0.15A 4X2SON RoHS : Compliant | 81,500 | |||
| MAX17303G+T | Analog Devices Inc | RoHS : Compliant | 80,000 | |||
TPS71730QDRVRQ1 | Texas Instruments | LOW NOISE, HIGH-BANDWIDTH PSRR LDO150MA RoHS : Compliant | 55,093 | |||
| UDZVFHTE-173.0B | ROHM Semiconductor | 齐纳二极管（对应AEC-Q101） RoHS : Compliant |
| 15,000 | ||
| MAX17301X+ | Analog Devices Inc | RoHS : Compliant | 9,070 | |||
| BH1730FVC-TR | ROHM Semiconductor | Digital 16bit Serial Output Type Ambient Light Sensor IC RoHS : Compliant |
| 6,120 | ||
| UDZVFHTE-1730B | ROHM Semiconductor | Zener Diodes (支持 AEC-Q101) RoHS : Compliant |
| 6,000 | ||
| UFZVTE-1730B | ROHM Semiconductor | 齐纳二极管 RoHS : Compliant |
| 5,980 | ||
| 2SB1730TL | ROHM Semiconductor | Low VCE(sat) Transistor RoHS : Compliant |
| 3,000 | ||
| MAX17303X+T | Analog Devices Inc | RoHS : Compliant | 2,499 | |||
| MAX17301X+T | Analog Devices Inc | RoHS : Compliant | 1,965 | |||
CSD17305Q5A | Texas Instruments | Hong Kong RoHS : Compliant | 1,500 | |||
| MAX17301G+ | Analog Devices Inc | RoHS : Compliant | 1,400 | |||
CSD17302Q5A | Texas Instruments | Hong Kong RoHS : Compliant | 853 | |||
 ComSIT USA | JZ505417306 | STORA ENSO | AVAILABLE EU | 900 | ||
| 402017300 | CONVER | AVAILABLE EU | 7,931 | |||
| JZ505417308 | STORA ENSO | AVAILABLE EU | 2,759 | |||
| JZ505417305 | STORA ENSO | AVAILABLE EU | 900 | |||
| JZ505417307 | STORA ENSO | AVAILABLE EU | 3,635 | |||
| JZ505417309 | STORA ENSO | AVAILABLE EU | 3,614 | |||
ComSIT USA | HCPL81730AE | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 13,300 | ||
| HCPL81730DE | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 3,374 | |||
| CNY173060E | Avago Technologies | HIGH COLLECTOR-EMITTER VOLTAGE TYPE PHOTOTRANSISTOR OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 1,430 | |||
| 5450217300 | Sumida Corporation | Electronic Component RoHS : Compliant | 689 | |||
| AV917301 | ics | Electronic Component RoHS : Not Compliant | 341 | |||
| HCPL817300E | Avago Technologies | PHOTOTRANSISTOR OPTOCOUPLER HIGH-DENSITY MOUNTING TYPE Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 318 | |||
| ZCAT17300730 | TDK Corporation | FERRITE CORE WITH CASE Ferrite Cores/Accessories RoHS : Compliant | 93 | |||
| AV917301CS8LF | ics | Video Genlock PLL, 1.25-75 MHz output; 5 V CMOS SOP-8; WITH phase detector, charge-pump, loop filter and VCO RoHS : Compliant | 60 | |||
 GLYN GmbH & Co. KG | P1730FHF1MA10 | Tianma Micro-electronics Co | TFT 17.30", 1920x1080, IPS, 1200cd, LVDS | 3 | ||
 Interstate Connecting Components | 1730 | Heyco | USR 40 BLACK RoHS : Compliant |
| 66 | |
| 241730-2 | MISC MIL-AERO | CENTER CONTACT PIN FOR L4PNM-H | 18 | |||
| 20015173-00 | TE Connectivity | 4810A-010-D RoHS : Compliant | 0 | |||
| 217-3027-000 | ITT Interconnect Solutions | 2173027000 | 0 | |||
| 143-1173-000 | ITT Interconnect Solutions | INSUL ASSY PIN BKAD 30T2 CRIMP | 0 | |||
| 1-730225-2 | TE Connectivity | ANVIL, COMBINATION |
| 0 | ||
| 51730-007LF | Amphenol FCi | 51730-007LF-CONNECTOR,PBRAH RoHS : Compliant | 0 | |||
| 030-9173-036 | ITT Interconnect Solutions | CONTACT PIN CRIMP ST CBL MOUNT 030-9173-036 |
| 0 | ||
| CX1173-000 | TE Connectivity | 55PC0233-18-3/6/9CS2958 | 0 | |||
| T1730163132-000 | TE Connectivity | H16B-TBF-LB-M32 RoHS : Compliant |
| 0 | ||
| T1730242125-000 | TE Connectivity | H24B-TBF-LB-M25 RoHS : Compliant |
| 0 | ||
| 2217303-1 | TE Connectivity | ALU TECH CRIMPER, WIRE CONICAL RoHS : Compliant |
| 0 | ||
| 217-3026-000MS | ITT Interconnect Solutions | NUT JAM KPT07E-8 | 0 | |||
| 2217303-2 | TE Connectivity | ALU TECH CRIMPER, WIRE CONICAL RoHS : Compliant |
| 0 | ||
| 154173-0104 MS | ITT Interconnect Solutions | M8351331-C03CN | 0 | |||
 PEI Genesis | 217-3028-200 | ITT Interconnect Solutions |
| 124 | ||
| 17-30873-7 | SOURIAU-SUNBANK |
| 0 | |||
| 143-1173-000 | ITT Interconnect Solutions |
| 0 | |||
| 030-9173-036 | ITT Interconnect Solutions |
| 0 | |||
| 120173001 REV - | ITT Interconnect Solutions |
| 0 | |||
| 217-3031-000A71 | ITT Interconnect Solutions |
| 0 | |||
| 217-3027-100 | ITT Interconnect Solutions |
| 0 | |||
| 031-1310-0117-301 | Dialight |
| 0 | |||
| 10-631173-019 | Amphenol Corporation |
| 0 | |||
| J1730-34 | SOURIAU-SUNBANK |
| 0 | |||
| 17-300240 | Amphenol Corporation |
| 0 | |||
| C91-730055-05P | Amphenol Corporation |
| 0 | |||
| 217-3028-000A69 | ITT Interconnect Solutions |
| 0 | |||
| 217-3034-A71 | ITT Interconnect Solutions |
| 0 | |||
| 11444917-30 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 1-173081-0 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 3,008 | |
| 173081-8 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1,443 | ||
| 3460173001 | TE Connectivity | Connectors |
| 1,277 | ||
| 457173001 | TE Connectivity | Connectors |
| 139 | ||
| TSW-117-30-T-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 126 | ||
| 2173047-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 53 | ||
| FLE-173-01-G-DV-A | Samtec Inc | Cost Effective Surface Mount Socket, 0.0 RoHS : Compliant |
| 33 | ||
| 72-173022-21P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 23 | ||
| 72-173014-18P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 15 | ||
| 72-173014-19P | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 15 | ||
| 173081-6 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 11 | ||
| 095-909-173-048 | Amphenol RF | N-Type Plug to N-Type Plug Times LMR-400 |
| 1 | ||
| 72-173020-16S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 1 | ||
| RM212-070-111-7300 | AirBorn a molex company | Solder Cup Cable Connector with Mounting |
| 1 | ||
| 72-173014-19S | Amphenol Corporation | MIL-C 26482 SERIES CONNECTOR |
| 1 | ||
 Richardson RFPD | R417306130 | Radiall | Attenuator 4GHz RoHS : Not Compliant |
| 0 | |
| SI5335D-B01730-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 85173073 | HUBER+SUHNER | Cable Assembly Coaxial 0.076m 446P to 446P M-M NAN RoHS : Compliant | 0 | |||
| R417303110 | Radiall | Attenuator 4GHz RoHS : Compliant |
| 0 | ||
| 095-909-173-048 | Amphenol Corporation | Cable Assembly LMR-400 1.219m Type N to Type N PL- RoHS : Compliant |
| 0 | ||
| 85173082 | HUBER+SUHNER | Cable Assembly Coaxial 0.33m 446P to 446P M-M NANO RoHS : Compliant | 0 | |||
| DC1730A | Analog Devices Inc | LT3973EMSE Demo Board RoHS : Compliant |
| 0 | ||
| 095-909-173-012 | Amphenol Corporation | Cable Assembly LMR-400 0.305m Type N to Type N PL- RoHS : Compliant |
| 0 | ||
| 85173077 | HUBER+SUHNER | Cable Assembly Coaxial 0.203m 446P to 446P M-M NAN RoHS : Compliant | 0 | |||
| 095-909-173-024 | Amphenol Corporation | Cable Assembly LMR-400 0.61m Type N to Type N M-M RoHS : Compliant |
| 0 | ||
| 85173079 | HUBER+SUHNER | Cable Assembly Coaxial 0.254m 446P to 446P M-M RoHS : Compliant | 0 | |||
| 85173080 | HUBER+SUHNER | Cable Assembly Coaxial 0.279m 446P to 446P M-M NAN RoHS : Not Compliant | 0 | |||
| 034-1017-300 | Amphenol Corporation | Conn HD-BNC 0Hz to 3GHz 75Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| 85173085 | HUBER+SUHNER | Cable Assembly Coaxial 0.406m 446P to 446P M-M NAN RoHS : Compliant | 0 | |||
| 514CBC001730BAGR | Skyworks Solutions Inc | Oscillator XO 38MHz ±50ppm CMOS 52% 3.3V 6-Pin SMD RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 505417-3010 | Molex | INSTOCK | 343,200 | ||
| 104173-0225 | Molex | INSTOCK | 117,000 | |||
| UDZSTE-1730B | INSTOCK | 65,053 | ||||
| 599173-000 | TE Connectivity | INSTOCK RoHS : Not Compliant | 21,710 | |||
| 001.17.301 | ETTGR | INSTOCK | 18,787 | |||
| 7-1377173-0 | TE Connectivity | INSTOCK RoHS : Compliant | 12,025 | |||
| 1-173081-0 | TE Connectivity | INSTOCK RoHS : Compliant | 6,184 | |||
| 173081-8 | TE Connectivity | INSTOCK RoHS : Compliant | 3,779 | |||
| 30500017300 | INSTOCK | 3,700 | ||||
| 3460173001- | TE Connectivity | INSTOCK | 2,515 | |||
| 217-3027-000 | ITT Interconnect Solutions | INSTOCK | 2,397 | |||
| 10251730- | INSTOCK | 1,014 | ||||
| HBO.C173.0H | INSTOCK | 497 | ||||
| SXA0617300100K5%AC | INSTOCK | 350 | ||||
| 6026B0117301 | INSTOCK | 1 | ||||
 Avnet Abacus | 173081-4 | TE Connectivity | Conn Wire to Board HDR 4 POS 25mm Solder ST ThruHole (Alt: 173081-4) RoHS : Compliant | 9,000 | ||
| 88917-301LF | Amphenol Corporation | Connector Accessories Receptacle Guide Module Screw Down Version 4Row Liquid Crystal Polymer Natural (Alt: 88917-301LF) RoHS : Compliant | 5,600 | |||
| ZCAT1730-0730A-BK | TDK Corporation | Split Core Ferrite 7 mm 10 MHz 500 MHz 80 Ohm (Alt: ZCAT1730-0730A-BK) RoHS : Compliant | 840 | |||
| 1061730 | Phoenix Contact | Pin Header BoardtoBoard 08 mm 2 Rows 80 Contacts Surface Mount Straight (Alt: 1061730) RoHS : Compliant | 500 | |||
| 1971730 | Phoenix Contact | ZEC 15 4ST50 C2 ZEC154ST50C2 (Alt: 1971730) RoHS : Compliant | 0 | |||
| 2173046-4 | TE Connectivity | (Alt: 2173046-4) RoHS : Compliant | 0 | |||
| 2217303-2 | TE Connectivity | (Alt: 2217303-2) RoHS : Compliant | 0 | |||
| 1730160000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1730160000) RoHS : Compliant | 0 | |||
| 1571730000 | Weidmüller Interface GmbH & Co. KG | Connector Accessories ClipIn Foot Orange (Alt: 1571730000) RoHS : Compliant | 0 | |||
| D17308-000 | TE Connectivity | (Alt: D17308-000) RoHS : Compliant | 0 | |||
| 2840173001 | TE Connectivity | High Performance Cable 1Conductors 26AWG Tin Plated Copper Black 1000Vac (Alt: 2840173001) RoHS : Compliant | 0 | |||
| 1730790000 | Weidmüller Interface GmbH & Co. KG | Conn Terminal Block SKT 11 POS 5mm Screw RA Cable Mount 10A Box (Alt: 1730790000) RoHS : Compliant | 0 | |||
| 20015173-00 | TE Connectivity | (Alt: 20015173-00) RoHS : Compliant | 0 | |||
| 0041.9141.7307 | Schurter Electronic Components | Electromechanical Switch LDT Switch NO SPST 02A (Alt: 0041.9141.7307) RoHS : Compliant | 0 | |||
M39003/01-7302 | KEMET Corporation | Tantalum Capacitor 15 uF 75 V 10 Axial Leaded 12 ohm 387 mA C 892 mm 1996 mm (Alt: M39003/01-7302) RoHS : Not Compliant | 0 | |||
Avnet Asia | 10173011-A108TLF | Amphenol Corporation | FCI10173011-A108TLF 8PIN MICROSPACEXS SE (Alt: 10173011-A108TLF) RoHS : Compliant |
| 1,365 | |
| 0173020001 | Molex | (Alt: 0173020001) RoHS : Compliant | 0 | |||
| UDZVFHTE-1730B | ROHM Semiconductor | (Alt: UDZVFHTE-1730B) RoHS : Compliant | 0 | |||
| 17-300390 | Amphenol Corporation | IP67 INDUSTRIAL DUPLEX LC MM (Alt: 17-300390) RoHS : Compliant | 0 | |||
UDZSTE-1730B | ROHM Semiconductor | Diode Zener Single 29.94V 3% 200mW 2-Pin UMD T/R (Alt: UDZSTE-1730B) RoHS : Compliant | 0 | |||
| BH1730FVC-TR | ROHM Semiconductor | (Alt: BH1730FVC-TR) RoHS : Compliant | 0 | |||
| 0173090001 | Molex | (Alt: 0173090001) RoHS : Compliant | 0 | |||
| 51730-155LF | Amphenol Corporation | (Alt: 51730-155LF) RoHS : Compliant | 0 | |||
| 6173.0049 | Schurter Electronic Components | (Alt: 6173.0049) RoHS : Compliant | 0 | |||
| 51730-145LF | Amphenol Corporation | (Alt: 51730-145LF) RoHS : Compliant | 0 | |||
| 1730830004 | Molex | (Alt: 1730830004) RoHS : Compliant | 0 | |||
| FOD817300 | onsemi | 4-Pin DIP Phototransistor Optocouplers. (Alt: FOD817300) RoHS : Compliant | 0 | |||
| 6173.0010 | Schurter Electronic Components | (Alt: 6173.0010) RoHS : Compliant | 0 | |||
| 51730-219LF | Amphenol Corporation | (Alt: 51730-219LF) RoHS : Compliant | 0 | |||
| PH1730AL,115 | Nexperia | (Alt: PH1730AL,115) RoHS : Compliant | 0 | |||
 Avnet Silica | C17303_HB-2X2-5050-S | LEDIL | Lens Assembly for 25 Spot Beam 2x2 LEDs PMMA Clear (Alt: C17303_HB-2X2-5050-S) RoHS : Compliant | 3,520 | ||
| FOD817300 | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817300) RoHS : Compliant | 0 | |||
| 2SB1730TL | ROHM Semiconductor | Trans GP BJT PNP 12V 2A 3Pin TUMT TR (Alt: 2SB1730TL) RoHS : Compliant | 0 | |||
| SLG59M1730C | Renesas Electronics Corporation | (Alt: SLG59M1730C) RoHS : Compliant | 0 | |||
| PXN017-30QLJ | Nexperia | Transistor MOSFET NChannel 30V 12A 8Pin MLPAK33 (Alt: PXN017-30QLJ) RoHS : Compliant | 0 | |||
| UDZSTE-1730B | ROHM Semiconductor | Diode Zener Single 2994V 3 200mW 2Pin UMD TR (Alt: UDZSTE-1730B) RoHS : Compliant | 0 | |||
BUK9M17-30EX | Nexperia | (Alt: BUK9M17-30EX) RoHS : Compliant | 0 | |||
| UDZSTE-173.0B | ROHM Semiconductor | Diode Zener Single 3V 5 200mW 2Pin UMD Emboss TR (Alt: UDZSTE-173.0B) RoHS : Compliant | 0 | |||
| TC2117-3.0VDBTR | Microchip Technology Inc | LDO Regulator Pos 3V 08A 4Pin3Tab SOT223 TR (Alt: TC2117-3.0VDBTR) RoHS : Compliant | 0 | |||
| TC1017-3.0VLTTR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SC70 TR (Alt: TC1017-3.0VLTTR) RoHS : Compliant | 0 | |||
| TC1017-3.0VCTTR | Microchip Technology Inc | (Alt: TC1017-3.0VCTTR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YMT-TZ | Microchip Technology Inc | LDO Regulator Pos 3V 015A 4Pin DFN TR (Alt: MIC5317-3.0YMT-TZ) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: MIC5317-3.0YM5-TR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YD5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin TSOT23 TR (Alt: MIC5317-3.0YD5-TR) RoHS : Compliant | 0 | |||
| CS17307_STRADA-IP-2X6-T2-B-PC | LEDIL | MultiLens 2x6 Position PinScrew Fastening Type 2 Beam (Alt: CS17307_STRADA-IP-2X6-T2-B-PC) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 917309-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 13,000 | |
| 917308-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,000 | ||
| 917308-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 8,000 | ||
| 671-7308 | Wurth Electronics Midcom | IN STOCK SHIP TODAY |
| 4,330 | ||
| 45296173-0 | JMC Products | IN STOCK SHIP TODAY |
| 1,500 | ||
TPS71730DCKT | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 450 | ||
| CSD17302Q5A | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 304 | ||
| 51730-10 | COMM CON | IN STOCK SHIP TODAY | 100 | |||
| 2SC1730 | IN STOCK SHIP TODAY |
| 63 | |||
| CSD17301Q5A | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 1730418 | Phoenix Contact | IN STOCK SHIP TODAY RoHS : Compliant |
| 15 | ||
| 22-17-3072 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 88917-301 | Amphenol FCi | IN STOCK SHIP TODAY |
| 4 | ||
| 1730130000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 2 | ||
| DF1730SC | IN STOCK SHIP TODAY |
| 1 | |||
 DB Roberts | 5702-217-30Z3 | Seastrom Mfg |
| 215 | ||
| 1730 | Heyco | USR 40 BLACK RoHS : Compliant | 0 | |||
| M2117-3005-A-24 | RAF Electronic Hardware | 0 | ||||
| 491730 | Essentra Components | 0 | ||||
| M1317-3005-B-5 | RAF Electronic Hardware | 0 | ||||
| M2117-3005-A | RAF Electronic Hardware | 0 | ||||
| 34009173001 | Essentra Components | 0 | ||||
| D2-519-1730-190 | Southco | This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele | 0 | |||
| 4617300 | SHEREX FASTENING SO | 0 | ||||
| 173002600022 | Essentra Components | WASHER M2,6 | 0 | |||
| M3217-3005-3005-28 | RAF Electronic Hardware | RoHS : Compliant | 0 | |||
| 1730-632-A | RAF Electronic Hardware | 0 | ||||
| 461730 | Essentra Components | 0 | ||||
| SPL17302A | Spiralock | 1/4-28 SPL 3 T10 B TiN Standard New Taps | 0 | |||
| 173000600022 | Essentra Components | WASHER M6 | 0 | |||
 EBV Elektronik | HCPL-817-300E | Broadcom Limited | Optocoupler Transistor Output 1 Channel Surface Mount DIP 4 Pins 50 mA 5 kV 50 (Alt: HCPL-817-300E) RoHS : Compliant | 37,400 | ||
| HCPL-817-30CE | Broadcom Limited | Optocoupler Transistor Output 1 Channel SMD 4 Pins 50 mA 5 kV 200 (Alt: HCPL-817-30CE) RoHS : Compliant | 19,200 | |||
| HCPL-817-30DE | Broadcom Limited | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SMD DIP Tube (Alt: HCPL-817-30DE) RoHS : Compliant | 13,500 | |||
| CNY17-3-060E | Broadcom Limited | Optocoupler DCIN 1CH Transistor With Base DCOUT 6Pin PDIP Tube (Alt: CNY17-3-060E) RoHS : Compliant | 13,455 | |||
| CNY17-3-000E | Broadcom Limited | Optocoupler Transistor Output 1 Channel DIP 6 Pins 60 mA 5 kV 100 (Alt: CNY17-3-000E) RoHS : Compliant | 12,285 | |||
| HCPL-817-30BE | Broadcom Limited | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin SMD DIP Tube (Alt: HCPL-817-30BE) RoHS : Compliant | 9,300 | |||
| FOD817300W | onsemi | 4Pin DIP Phototransistor Optocouplers ONSSPCISTNJZ8E4V (Alt: FOD817300W) RoHS : Compliant | 0 | |||
| HCPL-817-30AE | Broadcom Limited | Optocoupler DCIN 1CH Transistor DCOUT 4Pin PDIP SMD Tube (Alt: HCPL-817-30AE) RoHS : Compliant | 0 | |||
| HCPL-817-30LE | Broadcom Limited | Optocoupler DCIN 1CH Transistor DCOUT 4Pin PDIP SMD Tube (Alt: HCPL-817-30LE) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-TR | Microchip Technology Inc | LDO Regulator Pos 3V 015A 5Pin SOT23 TR (Alt: MIC5317-3.0YM5-TR) RoHS : Compliant | 0 | |||
| MIC5317-3.0YM5-T5 | Microchip Technology Inc | SINGLE HIGH PERFORMANCE 150MA LDO (Alt: MIC5317-3.0YM5-T5) RoHS : Compliant | 0 | |||
| C17303_HB-2X2-5050-S | LEDIL | Lens Assembly for 25 Spot Beam 2x2 LEDs PMMA Clear (Alt: C17303_HB-2X2-5050-S) RoHS : Compliant | 0 | |||
| FH8065301730502-SR3V8 | Intel Corporation | MPU CELERON N CISC 64Bit 1580MHz 1170Pin FCBGA Tray (Alt: 962777) RoHS : Compliant | 0 | |||
| FH8065301730502S R1W5 | Intel Corporation | MPU Celeron 64Bit 1580MHz 1170Pin FCBGA Tray (Alt: 934898) RoHS : Compliant | 0 | |||
| CS17307_STRADA-IP-2X6-T2-B-PC | LEDIL | MultiLens 2x6 Position PinScrew Fastening Type 2 Beam (Alt: CS17307_STRADA-IP-2X6-T2-B-PC) RoHS : Compliant | 0 | |||
 ECCO | 217-3029-000-MS | ITT Interconnect Solutions |
| 497 | ||
| 217-3028-000-MS | ITT Interconnect Solutions |
| 250 | |||
| 217-3026-000-MS | ITT Interconnect Solutions |
| 249 | |||
| 2173031000 | ITT Interconnect Solutions |
| 162 | |||
| 2173029000 | ITT Interconnect Solutions |
| 103 | |||
| 217-3029-000 | ITT Interconnect Solutions |
| 103 | |||
| 217-3032-000 | ITT Interconnect Solutions |
| 59 | |||
| 2173032000 | ITT Interconnect Solutions |
| 59 | |||
| 217-3033-000 | ITT Interconnect Solutions |
| 40 | |||
| 2173033000 | ITT Interconnect Solutions |
| 40 | |||
| 2173034000 | ITT Interconnect Solutions |
| 20 | |||
| 217-3034-000 | ITT Interconnect Solutions |
| 20 | |||
| 217-3026-000 | ITT Interconnect Solutions |
| 1 | |||
| 217-3028-000 | ITT Interconnect Solutions |
| 1 | |||
| 2173028000 | ITT Interconnect Solutions |
| 1 | |||
 Flip Electronics | FOD817300 | onsemi | Stock, Ship Today RoHS : Compliant |
| 13,870 | |
| FOD817300W | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,600 | ||
 Maritex | 917308-1 | TE Connectivity | Rectangular Connector Contacts; 917308-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 22 AWG RoHS : Compliant |
| 103,756 | |
| 917309-1 | TE Connectivity | Rectangular Connector Contacts; 917309-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 22 AWG RoHS : Compliant |
| 86,954 | ||
| JS-1173-06 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 6-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 7,027 | ||
| JS-1173-03 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 3-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 3,000 | ||
| JS-1173-04 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 4-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 1,986 | ||
| JS-1173-08 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 8-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 1,489 | ||
| ULO-TB17-308/2.54-03P-4000A | ULO | PCB terminal block; pitch 2.54mm; 3-ways; vertical; wire range 1.0mm2 (AWG 26-18); rising clamp type; with screws for a flat screwdriver; brass cage; green color; UL 150V/6A, TUV 130V/8A |
| 1,162 | ||
| JS-1173-05 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 5-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 930 | ||
| JS-1173-02 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.50mm; 2-contacts; female; applicable wire AWG#28-32; 50V/1A |
| 256 | ||
| 156120M173000 | Wurth Elektronik | LED 156120M173000; SMD 1206; RGB; red typ. 624 nm; 170-270 mcd/20mA; green typ. 525 nm; 500-700 mcd/20mA; blue typ. 470 nm; 170-250 mcd/20mA; water clear lens; 120 degree RoHS : Compliant |
| 197 | ||
| DF17(3.0)-40DS-0.5V(57) | Hirose Electric Co Ltd | Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board-to-Board); DF17(3.0)-40DS-0.5V(57); HIROSE ELECTRIC; 2; Straight; 300 mA; 40 RoHS : Compliant |
| 14 | ||
 Master Electronics | 1730 | JKL Components Corporation | T-1 3/4 Wire Lead Lamp RoHS : Compliant |
| 30 | |
| 1730 | Woodhead Molex | Conn Power RCP 2Power/1Ground POS ST Cable Mount 3 Terminal 1 Port Safeway® RoHS : Compliant |
| 0 | ||
| 20015173-00 | TE Connectivity | 4810A-010-D MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1730160000 | Weidmüller Interface GmbH & Co. KG | SL-SMT 5.08HC/18/90FV 3.2S RoHS : Compliant |
| 0 | ||
| 154173-0008 | ITT Interconnect Solutions | Cable Assembly RG178/U 0.025m 21 POS Micro D-Sub RCP Crimp RoHS : Not Compliant |
| 0 | ||
| 154173-0036-MS | ITT Interconnect Solutions | Cable Assembly RG178/U 4.368m 24AWG 21 POS Micro D-Sub RCP Crimp RoHS : Not Compliant |
| 0 | ||
| 154173-0053 | ITT Interconnect Solutions | MICRO RoHS : Not Compliant |
| 0 | ||
| 249-2317-301 | ITT Interconnect Solutions | Itt Cannon |Itt Cannon 249-2317-301 RoHS : Compliant |
| 0 | ||
| 1-730225-2 | TE Connectivity | ANVIL COMBINATION RoHS : Compliant |
| 0 | ||
| 3517/30(100) | 3M Interconnect | The 3M Shielded/Jacketed RoHS : Compliant |
| 0 | ||
| SFSD-17-30-G-18.00-D-NUS | Samtec Inc | .050 Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| SFSS-03-30-G-17.30-D-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 030-9173-036 | ITT Interconnect Solutions | Contact PIN Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| CX1173-000 | TE Connectivity | 55PC0233-18-3/6/9CS2958 MOQ Reduction RoHS : Compliant |
| 0 | ||
| D17308-000 | TE Connectivity | WV-762381-2.5-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W17303 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to SMA Male Low Loss Cable Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 6,905 | ||
| PE3W17303-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 12 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 12 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303-12 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303-12 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303-12 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,717 | ||
| PE3W17303-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 48 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 48 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303-48 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303-48 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303-48 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303-48 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,108 | ||
| PE3W17303-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated N Male to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 60 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 60 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17303-60 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17303-60 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W17303-60 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17303-60 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 886 | ||
| PE3W17306-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 48 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 48 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-48 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-48 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-48 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE3W17306-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 12 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 12 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-12 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-12 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-12 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE3W17306-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male Right Angle to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-FR Coax with Times Microwave Components., Radio frequency assembly fire rated N male right angle to N male right angle low loss cable 36 inch length using LMR-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male right angle to N male right angle low loss cable 36 inch length using LMR-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle type N cable connection on the other. Our low loss right angle type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17306-36 can also be known as a low loss right angle type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17306-36 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17306-36 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N right angle plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 400 | ||
| PE3FCA317-30M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to SC UPC, OS2 Single Mode Distribution Cable, 5.0mm LSZH, 2.0mm breakout, Yellow-30M. Pasternack’s PE3FCA317-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 6-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA317-30M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 87 | ||
| PE3FCA417-30M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to LC UPC, OM4 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Aqua-30M. Pasternack’s PE3FCA417-30M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 30-meter long 12-fiber cable assembly is equipped with LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA417-30M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 28 | ||
| PE7017-30 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.4:1, Attenuation: 30 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 30 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7017-30 is a fixed 30 dB attenuator from Pasternack. This 30dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7017-30 30 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7017-30 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 30dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 6 | ||
| PE3W17302 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMB Jack to N Male Cable Using RG178 Coax. PE3W17302 is a SSMB jack to N male cable using RG178 coax. This Pasternack SSMB jack to N male cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm N for connector 2. Our jack SSMB to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17302 SSMB jack to N male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W17308-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to 4.3-10 male low loss cable 24 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to 4.3-10 male low loss cable 24 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17308-24 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17308-24 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17308-24 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17308-24 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W17301 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. QMA Male to BNC Male Cable Using PE-P195 Coax. PE3W17301 is a QMA male to BNC male cable using PE-P195 coax. This Pasternack QMA male to BNC male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm BNC for connector 2. Our male QMA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17301 QMA male to BNC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W17304 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. N Female to 4.3-10 Male Cable Using LMR-240-FR Coax. PE3W17304 is a N female to 4.3-10 male cable using LMR-240-FR coax. This Pasternack N female to 4.3-10 male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female N to male 4.3-10 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17304 N female to 4.3-10 male cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17308-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated N Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-240-FR Coax., Radio frequency assembly fire rated N male to 4.3-10 male low loss cable 36 inch length using LMR-240-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to 4.3-10 male low loss cable 36 inch length using LMR-240-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17308-36 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17308-36 RF cable has a FRPE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17308-36 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17308-36 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 Vyrian | R161730000 | Radiall | N-N, Panel Mount, Female-Female RoHS : Compliant | 14,726 | ||
| MAX31730AUB-T | Analog Devices (Maxim Integrated) | 11,211 | ||||
| PSMN017-30BL | Nexperia | Power Field-Effect Transistor, 32A I(D), 30V, 0.0233ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,019 | |||
| 1730207 | Phoenix Contact | Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,997 | |||
M28LV17-300P1 | STMicroelectronics | RoHS : Not Compliant | 8,691 | |||
| AV9173-01CN08 | Broadcom Limited | 8,514 | ||||
| TMS320C6203GLS17-300 | Texas Instruments | Digital Signal Processor, 32-Bit Size, CMOS, PBGA384 | 7,368 | |||
M28LV17-300K6 | STMicroelectronics | RoHS : Not Compliant | 6,701 | |||
| MAX31730AUB | Analog Devices Inc | 6,008 | ||||
| MAX17302X+T | Analog Devices Inc | Power Supply Management Circuit, Adjustable, 1 Channel, PBGA15 RoHS : Compliant | 5,317 | |||
| PXN017-30QL | Nexperia | Power Field-Effect Transistor RoHS : Compliant | 5,237 | |||
SN751730NSRE4 | Texas Instruments | Line Transceiver, 3 Func, 3 Driver, 3 Rcvr, BIPolar, PDSO20 RoHS : Compliant | 4,119 | |||
| TPS71730DCKTG4 | Texas Instruments | Fixed Positive LDO Regulator, 3V, 0.3V Dropout, BICMOS, PDSO5 RoHS : Compliant | 3,907 | |||
| 11730D | Broadcom Limited | 3,485 | ||||
| 154173-0023MS | ITT Interconnect Solutions | D Microminiature Connector RoHS : Compliant | 634 | |||
 Waytek, Inc. | 817-3000 | Xantrex Technology Inc | Xantrex Freedom X 3000 Inverter |
| 4 | |
 Win Source Electronics | 917309-1 | TE Connectivity | CONN MINI MLC TAB CONT RoHS : Compliant |
| 180,000 | |
CSD17308Q3 | Texas Instruments | MOSFET N-CH 30V 47A 8SON RoHS : Compliant |
| 52,500 | ||
| CSD17308Q3T | Texas Instruments | MOSFET N-CH 30V 50A / Trans MOSFET N-CH 30V 50A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 47,940 | ||
| TPS71730DCKRG4 | Texas Instruments | Low Noise, High-Bandwidth PSRR Low-Dropout 150mA Linear Regulator | IC REG LINEAR 3V 150MA SC70-5 RoHS : Compliant |
| 39,005 | ||
| TPS71730DCKT | Texas Instruments | IC REG LDO 3V 0.15A SC70-5 RoHS : Compliant |
| 39,000 | ||
| TPS71730DCKR | Texas Instruments | IC REG LDO 3V 0.15A SC70-5 RoHS : Compliant |
| 36,000 | ||
CSD17309Q3 | Texas Instruments | MOSFET N-CH 30V 60A 8SON / Trans MOSFET N-CH 30V 20A 8-Pin VSON-CLIP EP T/R RoHS : Compliant |
| 31,000 | ||
| BH1730FVC-TR | ROHM Semiconductor | Digital 16bit Serial Output Type Ambient Light Sensor IC RoHS : Compliant |
| 16,330 | ||
CSD17306Q5A | Texas Instruments | MOSFET N-CH 30V 100A 8SON / Trans MOSFET N-CH 30V 24A 8-Pin VSONP EP T/R RoHS : Compliant |
| 10,000 | ||
CSD17304Q3 | Texas Instruments | MOSFET N-CH 30V 56A 8SON RoHS : Compliant |
| 10,000 | ||
| HCPL-817-300E | Broadcom Limited | OPTOISOLATOR 5KV TRANSISTOR 4SMD RoHS : Compliant |
| 6,700 | ||
CSD17307Q5A | Texas Instruments | MOSFET N-CH 30V 73A 8SON RoHS : Compliant |
| 5,000 | ||
| ISD1730SY | Nuvoton Technology Corp | Multi-Message Single-Chip Voice Record & Playback Devices | IC VOICE REC/PLAY 30SEC 28-SOIC RoHS : Compliant |
| 1,000 | ||
 Wuhan P&S | FOD817300 | onsemi | 4-Pin DIP Phototransistor Optocouplers RoHS : Compliant |
| 30,000 | |
| 51730-232LF | Amphenol FCi | PwrBlade:4R28P,2.54mm,T/H,R/A,STB HDR |
| 924 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand