| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
170L-AE2-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Master Electronics | SGE151020170L02000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | |
| SGE24501170L01000C01000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| MTLW-107-05-G-D-170-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-02-24-L-17.0-L4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-03-26-L-17.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-10-20-L-17.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-03-28-L-17.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MDM-37PH170L | ITT Interconnect Solutions | Cable Assembly Coaxial 26AWG 37 POS D-Sub PIN Crimp RoHS : Not Compliant |
| 0 | ||
| S1SD-15-28-GF-11.70-L1 | Samtec Inc | MICRO MATE DOUBLE ROW DI RoHS : Compliant |
| 0 | ||
| HW-26-12-G-D-650-170-LL | Samtec Inc | .100 inch Pitch Board Stacker - Double Row - 26 Pins per Row - 10u Gold Contact - Gold Flash Tail - 0.65 Inch Stacker Height RoHS : Compliant |
| 0 | ||
| HMTSW-112-24-T-S-170-LA | Samtec Inc | Conn Unshrouded Header HDR 12 POS 2.54mm Solder RA Thru-Hole RoHS : Compliant |
| 0 | ||
| MTLW-108-05-G-D-170-LL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LU-3R-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-02-26-L-17.0-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-209-07-L-S-170-LL | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | MMBF170LT1G![]() | onsemi | Power MOSFET, N Channel, 60 Vdc, 500 mA, 5 Ohm, SOT-23, 3 Pins, Surface Mount - Tape and Reel (Alt: MMBF170LT1G) RoHS : Compliant |
| 285,000 | |
| HW-26-12-G-D-650-170-LL | Samtec Inc | Board Stackers & Spacers, Pin Header, 16.51 mm, 52 Contacts, Solder, 2 Rows, 2.54 mm, HW Series - Bulk (Alt: HW-26-12-G-D-650-170-LL) RoHS : Compliant |
| 0 | ||
| MDM-37PH170L | ITT Interconnect Solutions | - Bulk (Alt: MDM-37PH170L) RoHS : Not Compliant |
| 0 | ||
| S1SD-15-28-GF-11.70-L1 | Samtec Inc | Cable Assembly Discrete Wire 28AWG 0.3m 30 Position Discrete Wire Housing to 30 Position Discrete W - Bulk (Alt: S1SD-15-28-GF-11.70-L1) RoHS : Compliant |
| 0 | ||
MMBF170LT1![]() | onsemi | - Tape and Reel (Alt: MMBF170LT1) RoHS : Not Compliant | 0 | |||
| 3855170-LR-Z | Advanced Energy Industries Inc | ISR 12-LO/GS, 7501800C, 15M FIBER BLUE, OPTICS II LINE-SHAPED SPOT 5% - Bag (Alt: 3855170-LR-Z) RoHS : Compliant |
| 0 | ||
| 170L9868 | Eaton Corporation | - Bulk (Alt: 170L9868) RoHS : Not Compliant |
| 0 | ||
| 170L9162 | Eaton Corporation | - Bulk (Alt: 170L9162) RoHS : Compliant | 0 | |||
| 170L9653 | Eaton Corporation | - Bulk (Alt: 170L9653) RoHS : Compliant |
| 0 | ||
| ARC6-16-17.0-LU-LU-3R-1 | Samtec Inc | - Bulk (Alt: ARC6-16-17.0-LU-LU-3R-1) RoHS : Compliant |
| 0 | ||
| SJD12A170L01 | YAGEO Corporation | ESD Protection Device, 275 V, SOD-123S, 2 Pins, 170 V, SJD12AxxxL01 - Tape and Reel (Alt: SJD12A170L01) RoHS : Compliant |
| 0 | ||
| 170L9604 | Eaton Corporation | - Bulk (Alt: 170L9604) RoHS : Compliant |
| 0 | ||
| 170L9203 | Eaton Corporation | - Bulk (Alt: 170L9203) RoHS : Compliant |
| 0 | ||
| S1SS-05-28-GF-21.70-L1 | Samtec Inc | - Bulk (Alt: S1SS-05-28-GF-21.70-L1) RoHS : Compliant |
| 0 | ||
| 34-170-LPI | Bel Fuse | 50\\60 HZ, LAMINATED TRANSFORMER, ENCAPSU - Tape and Reel (Alt: 34-170-LPI) RoHS : Compliant |
| 0 | ||
![]() Newark | 170-001-170L001 | NorComp | D Sub Contact, Pin, 28-24Awg, Crimp; For |Norcomp 170-001-170L001 RoHS : Compliant |
| 21,657 | |
| DEA162170LT-5039A5 | TDK Corporation | Rf Filter, Low Pass, 1.4279 To 2.17Ghz; |Tdk DEA162170LT-5039A5 RoHS : Compliant |
| 3,525 | ||
| DEA162170LT-5039A5 | TDK Corporation | Rf Filter, Low Pass, 1.4279 To 2.17Ghz; |Tdk DEA162170LT-5039A5 RoHS : Compliant |
| 3,525 | ||
MMBF170LT1G![]() | onsemi | Mosfet, N, 60V, Sot-23; |Onsemi MMBF170LT1G RoHS : Compliant |
| 2,889 | ||
MMBF170LT1G![]() | onsemi | Mosfet, N, 60V, Sot-23; |Onsemi MMBF170LT1G RoHS : Compliant |
| 2,889 | ||
| 170-101-170L001 | NorComp | Contact, Crimp, Plug, 28-24Awg; |Norcomp 170-101-170L001 RoHS : Compliant |
| 797 | ||
| ZW-04-08-S-D-248-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. ZW-04-08-S-D-248-170-LL RoHS : Compliant |
| 432 | ||
| ZW-02-19-S-D-920-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 4Pos, Hdr; |Samtec, Inc. ZW-02-19-S-D-920-170-LL RoHS : Compliant |
| 270 | ||
| DW-03-14-T-S-1170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 3Pos, Hdr; |Samtec, Inc. DW-03-14-T-S-1170-LL RoHS : Compliant |
| 250 | ||
| ZW-18-09-S-D-250-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 36Pos, Hdr; |Samtec, Inc. ZW-18-09-S-D-250-170-LL RoHS : Compliant |
| 227 | ||
| ZW-15-15-S-S-240-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 15Pos, Hdr; |Samtec, Inc. ZW-15-15-S-S-240-170-LL RoHS : Compliant |
| 137 | ||
| ZW-19-09-S-S-250-170-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 19Pos, Hdr; |Samtec, Inc. ZW-19-09-S-S-250-170-LL RoHS : Compliant |
| 106 | ||
| 170-001-170L002 | NorComp | D Sub Contact, Pin, 28-24Awg, Crimp; For |Norcomp 170-001-170L002 RoHS : Compliant |
| 24 | ||
| 180-202-170L002 | NorComp | D-Sub Contact, Socket, 20-26Awg, Crimp; |Norcomp 180-202-170L002 RoHS : Compliant |
| 7 | ||
| 170-102-170L002 | NorComp | D Sub Contact, Socket, 28-24Awg, Crimp; For Use With:Norcomp 170 Series D Sub Housing Connectors; D Sub Contact Type:Socket (Female); Contact Material:Phosphor Bronze; Contact Plating:Gold Plated Contacts; Wire Size Awg Max:24Awg Rohs Compliant: Yes RoHS : Compliant |
| 4 | ||
![]() RS | 170L9868 | Eaton Bussmann | FUSE 630A 1600V 3BKN/110 AR |
| 0 | |
| 170L9653 | Eaton Bussmann | FUSE 1000A 660V 3KW/110 AR |
| 0 | ||
| 170L9604 | Eaton Bussmann | FUSE 700A 660V 3STN/110 AR |
| 0 | ||
| 170L9203 | Eaton Bussmann | FUSE 630A 660V 3STN/110 AR |
| 0 | ||
| MY1C25-170L | SMC Corporation of America | CYLINDER, RODLESS, MECH JOINT, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| 3TC52170LF4 | Siemens | CONTACTOR SIZE 8 2-POLE ;3TC52170LF4 |
| 0 | ||
| 3TC52170LJ8 | Siemens | CONTACTOR SIZE 8 2-POLE ;3TC52170LJ8 |
| 0 | ||
| 3TC56170LF4 | Siemens | CONTACTOR, DC OPER, SIZE 12,110V,2NO+2NC ;3TC56170LF4 |
| 0 | ||
| MY1M20-170L | SMC Corporation of America | CYLINDER, SLIDE BEARING GUIDE TYPE, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| 3TC5217-0LB4 | Siemens | CONTACTOR, DC OPER,2-POLE,2NO+2NC ;3TC5217-0LB4 |
| 0 | ||
| 3TC4817-0LV4 | Siemens | CONTACTOR,24-42VDC,2NO+2NC, W/VARISTOR ;3TC4817-0LV4 |
| 0 | ||
| MY1H16G-170L-XC56 | SMC Corporation of America | CYLINDER, RODLESS, SLIDE TABLE, MY1 SERIES |
| 0 | ||
| AKT170LE (00053200021412) | 3M | Adjustable Keyboard Tray AKT170LE, 26.5 in x 23 in x 8 in |
| 0 | ||
| LT-2513-701-012 (GLT-00358170 | LT-2513-701-012 | LT2513701012) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
| LTGNO501-TB-B-A/6V (4LT-20824170|LTGNO501-TB-B-A/6V|LTGNO501TBBA/6V) | Carling Technologies | SWITCH;ROCKER;TG/LTG SERIES |
| 0 | ||
![]() Bisco Industries | 170-201-170L002 | MISC. INDUSTRIAL CONNECTORS | 4 | |||
| 8831E-080-170L-F | MISC. INDUSTRIAL CONNECTORS | 3 | ||||
![]() Rochester Electronics | MMBF170LT3G![]() | onsemi | MOSFET N-Channel 60V 500mA SOT-23-3 T/R RoHS : Compliant |
| 3,493 | |
| APS12170LUAATN | Allegro MicroSystems LLC | Solid State Magnetic Sensor Latch Hall Effect 3-SIP Bulk RoHS : Compliant |
| 4,000 | ||
![]() Sager | 6121V5A170L.5CW | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | |
| 6126V3A170L.5ST | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6127V5A170L.5 | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| S1SD-15-28-GF-11.70-L1 | Samtec Inc | Rectangular Cable Assemblies Micro Mate Double Row Discrete Wire Cable Assembly, 1.00 mm Pitch RoHS : Compliant |
| 0 | ||
| 170L3754 | Eaton Bussmann | Specialty Fuses FUSE 100A 660V DIN 00 AR | 0 | |||
| 170L3835 | Eaton Bussmann | Specialty Fuses FUSE 63A 1000V DIN 0 AR | 0 | |||
| 6121V5A170L.5 | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6126V5A170L.5SL | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 3855170-LR-Z | Lumasense Technologies Inc | ISR 12-LO/GS, 750�1800�C, 15M FIBER BLUE, OPTICS II LINE-SHAPED SPOT 5% |
| 0 | ||
| 170L2027 | Eaton Bussmann | Specialty Fuses 315A 660V 000/80 AR | 0 | |||
| 170L8490 | Eaton Bussmann | Specialty Fuses FUSE 550A 660V 2BTN/50 AR | 0 | |||
| 170L8814 | Eaton Bussmann | Specialty Fuses FUSE 630A 660V 2S/110 AR | 0 | |||
| 170L9868 | Eaton Bussmann | Specialty Fuses FUSE 630A 1600V 3BKN/110 AR |
| 0 | ||
| 6127V2A170L.5ST | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6126V4A170L.5 | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
![]() TME | DEA202170LT-5076A1 | TDK Corporation | DEA202170LT-5076A1 |
| 144,000 | |
| 89006-170LF | Amphenol Corporation | Connector: DIN 41612; plug; data; Press-Fit; Plating: gold-plated |
| 1,392 | ||
| 170L9609 | Eaton Corporation | Fuse: fuse |
| 26 | ||
| 170L8926 | Eaton Corporation | Fuse: fuse; 400A |
| 2 | ||
| ARC6-16-17.0-LU-LD-2-1 | Samtec Inc | Cable; PIN: 50; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| ARC6-08-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 26; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| CS06S3F170LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 1206; 330mW; ±1%; CS; -55÷155°C |
| 0 | ||
NFZ5BBW170LN10L![]() | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 17Ω; SMD; 1.23A; 2020; R: 42mΩ; ±30% RoHS : Compliant |
| 0 | ||
| 52123170LF | Lapp Group | Stopper; M63; 1.5; IP68; brass; nickel; SKINDICHT®; with O-ring |
| 0 | ||
| ARC6-24-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 74; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| CS06W3F170LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 1206; 330mW; ±1%; CS; -55÷155°C |
| 0 | ||
| CS121WF170LT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 170mΩ; SMD; 2512; 1W; ±1%; CS; -55÷155°C |
| 0 | ||
| ARC6-16-17.0-LU-LU-3-1 | Samtec Inc | Cable; PIN: 50; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| ARC6-08-17.0-LU-LD-2-1 | Samtec Inc | Cable; PIN: 26; 431.8mm; PVC; blue; gold-plated; 34AWG; 100Ω; 17" RoHS : Compliant |
| 0 | ||
| SK2S200-170L | SMC Diode Solutions | Module: diode; double independent; 170V; If: 100Ax2; SOT227; screw |
| 0 | ||
![]() Ameya Holding Limited | MMBF170LT1G![]() | onsemi | Single N-Channel 60 V 225 mW Silicon Surface Mount Mosfet - SOT-23 RoHS : Compliant | 16,406 | ||
![]() ComSIT USA | MMBF170LT1G![]() | onsemi | N-channel MOSFET, 60V, 0.6A, RDS(on) 1.2?, SOT-23 package. RoHS : Compliant | 77 | ||
![]() Interstate Connecting Components | 180-101-170L001 | NorComp | RoHS : Compliant |
| 981 | |
| 170-102-170L001 | NorComp | RoHS : Compliant |
| 263 | ||
| 170-201-170L003 | NorComp | RoHS : Compliant |
| 237 | ||
| 170-202-170L003 | NorComp | RoHS : Compliant |
| 37 | ||
| MDM-37PH170L | ITT Interconnect Solutions | MDM-37PH170L | 0 | |||
| HVSL1000082A170L2000 | Amphenol PCD | HVSL SERIES CODING A 2POS WITH INTERLOCK | 0 | |||
| HVSL1200082A170L2000 | Amphenol PCD | HVSL SERIES CODING A 2POS WITH INTERLOCK | 0 | |||
| 74744-170LF | Amphenol FCi | 74744-170LF-METRAL HDR 5RX8M S RoHS : Compliant | 0 | |||
| 89006-170LF | Amphenol FCi | 89006-170LF-METRAL HDR 1MX5R P RoHS : Compliant | 0 | |||
| 85854-170LF | Amphenol FCi | 85854-170LF-METRAL HDR 5RX4M P RoHS : Compliant | 0 | |||
![]() PEI Genesis | MDM-37PH170L | ITT Interconnect Solutions |
| 0 | ||
![]() Powell Electronics | 89006-170LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 919 | |
| ZW-04-08-S-D-248-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 285 | ||
| ZW-02-19-S-D-920-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 178 | ||
| DW-03-14-T-S-1170-LL | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 165 | ||
| ZW-03-19-S-D-920-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 158 | ||
| ZW-18-09-S-D-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 150 | ||
| ZW-15-15-S-S-240-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 90 | ||
| ZW-15-09-S-S-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 90 | ||
| ZW-19-09-S-S-250-170-LL | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 70 | ||
| HW-26-12-G-D-650-170-LL | Samtec Inc | High-Reliability Tiger Eye Socket Strips RoHS : Compliant |
| 33 | ||
![]() Chip 1 Exchange | MTS170LQ-BO | INSTOCK | 1,649 | |||
MMBF170LT1G![]() | onsemi | INSTOCK RoHS : Compliant | 1,514 | |||
| 180-001-170L001 | NorComp | INSTOCK RoHS : Compliant | 950 | |||
| 180-001-170L001 | INSTOCK | 110 | ||||
| BV 039-5317.0 L | INSTOCK | 50 | ||||
![]() Avnet Abacus | HFD-170L | YAGEO Corporation | (Alt: HFD-170L) RoHS : Compliant | 0 | ||
| HFB-170L | YAGEO Corporation | (Alt: HFB-170L) RoHS : Compliant | 0 | |||
| HFA-170L | YAGEO Corporation | (Alt: HFA-170L) RoHS : Compliant | 0 | |||
| HFC-170L | YAGEO Corporation | (Alt: HFC-170L) RoHS : Compliant | 0 | |||
| 89006-170LF | Amphenol Corporation | (Alt: 89006-170LF) RoHS : Compliant | 0 | |||
| SJD12A170L01 | YAGEO Corporation | ESD Protection Device 275 V SOD123S 2 Pins 170 V SJD12AxxxL01 (Alt: SJD12A170L01) RoHS : Compliant | 0 | |||
| SJD12C170L01 | YAGEO Corporation | ESD Protection Device 275 V SOD123S 2 Pins 170 V SJD12CxxxL01 (Alt: SJD12C170L01) RoHS : Compliant | 0 | |||
| 77313-101-70LF | Amphenol Corporation | Conn Unshrouded Header HDR 70 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-101-70LF) RoHS : Compliant | 0 | |||
NFZ5BBW170LN10L![]() | Murata Manufacturing Co Ltd | Ferrite Chip Bead 170 17Ohm 25A 2Pin 2020 Emboss TR (Alt: NFZ5BBW170LN10L) RoHS : Compliant | 0 | |||
NFZ5BBW170LZ10L![]() | Murata Manufacturing Co Ltd | Ferrite Chip Bead 170 17Ohm 25A 2Pin 2020 Emboss TR (Alt: NFZ5BBW170LZ10L) RoHS : Compliant | 0 | |||
| DEA162170LT-5039A5 | TDK Corporation | Multilayer Low Pass Filter 14279MHz to 2170MHz 4Pin 0603 (Alt: DEA162170LT-5039A5) RoHS : Compliant | 0 | |||
![]() Avnet Asia | RBC290A170L2GWT-800#YJ1 | Renesas Electronics Corporation | (Alt: RBC290A170L2GWT-800#YJ1) RoHS : Not Compliant | 0 | ||
MMBF170LT1G![]() | onsemi | Power MOSFET, N Channel, 60 Vdc, 500 mA, 5 Ohm, SOT-23, 3 Pins, Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MMBF170LT1G![]() | onsemi | Power MOSFET N Channel 60 V 500 mA 5 ohm SOT23 Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | ||
| F17170_LINNEA-GC2-Z2T25 | LEDIL | Linear lensrectang24 Pos2833 x 430m (Alt: F17170_LINNEA-GC2-Z2T25) RoHS : Compliant | 0 | |||
| 2J7A83BA-170LL195-C91GRST_CU0226 | 2J USA | 2J7A83Ba Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311102333) RoHS : Compliant | 0 | |||
| 2J7A83BC-170LL195-C91GRST_300LL195 | 2J USA | 2J7A83Bc Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311102335) RoHS : Compliant | 0 | |||
| 2J7A83BB-170LL195-C91GRST_C91GRST_190 | 2J USA | 2J7A83Bb Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311104360) RoHS : Compliant | 0 | |||
| 2J7A83BC-170LL195-C91GRST_190LL195_CU | 2J USA | 2J7A83Bc Black Screw Mount 5G1 170cm LL195 SMAMaleGold Red Shrink Tube 5G2 170cm LL195 (Alt: SI311104769) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MMBF170LT1![]() | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,880 | |
MMBF170LT1G![]() | onsemi | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
![]() EBV Elektronik | MMBF170LT1G![]() | onsemi | Power MOSFET N Channel 60 V 500 mA 5 ohm SOT23 Surface Mount (Alt: MMBF170LT1G) RoHS : Compliant | 0 | ||
![]() FDH Electronics | 170-101-170L002 | INTERSTATE CONNECTING COMPONENTS | Contacts | 210 | ||
| 170-102-170L002 | MOUSER | Contacts | 41 | |||
| 180-102170L001 | NorComp | Contacts |
| 40 | ||
| 170-201-170L002 | NorComp | Miscellaneous RoHS : Compliant | 33 | |||
| 170-202-170L002 | Digi International Inc | Contacts | 33 | |||
![]() Maritex | MMBF170LT1G![]() | onsemi | MOSFETs; MMBF170LT1G; ON SEMICONDUCTOR; 60 V; 500 mA; 20 V; 225 mW RoHS : Compliant |
| 20,175 | |
| MMBF170LT1G | VBsemi Electronics Co Ltd | Transistor: N-MOSFET; unipolar; 60V; 250mA; 3.3ohm;0.3W; -55+150 st.C; SMD; SOT23 |
| 99 | ||
![]() Pasternack Enterprises US | PE34170LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 18 inches. BNC Male to BNC Male Cable 18 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 18 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 18 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-18, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-18 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 18 inch length using RG401 coax, RoHS. |
| 132 | |
| PE34170LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Male to BNC Male Cable 24 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 24 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 24 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-24, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-24 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 24 inch length using RG401 coax, RoHS. |
| 99 | ||
| PE34170LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG401/U, RF Cable Type: RG401, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male to BNC Male Cable 48 Inch Length Using RG401 Coax, RoHS., Radio frequency assembly BNC male to BNC male cable 48 inch length using RG401 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 48 inch length using RG401 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE34170LF-48, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE34170LF-48 is built with RG401 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 48 inch length using RG401 coax, RoHS. |
| 49 | ||
| PE3W08170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. HN Male Right Angle to 7/16 DIN Male Cable Using RG214 Coax, LF Solder. PE3W08170LF is a HN male right angle to 7/16 DIN male cable using RG214 coax. This Pasternack HN male right angle to 7/16 DIN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. HN right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN right angle to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08170LF HN male right angle to 7/16 DIN male cable assembly is constructed with RG214 coax. | 0 | |||
| PE3170LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: GR874, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to GR874 Sexless Cable 24 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly N male to GR874 sexless cable 24 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to GR874 sexless cable 24 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to GR874 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and GR874 cable connection on the other. Our type N to GR874 cable assemblies have a male gender on end 1 and sexless on end 2. This type N to GR874 cable is a male to sexless coax assembly, PE3170LF-24, can also be known as a type N plug to GR874 sexless cable assembly and will be shipped same-day as it is purchased. N type plug to GR874 sexless cable assembly PE3170LF-24 is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to GR874 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to GR874 sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3170LF-24 can also be used in the other direction and will be GR874 sexless to type N male cable assembly if the opposite connectivity is required. Type N plug to GR874 sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to GR874 cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to GR874 sexless cable 24 inch length using RG223 coax, RoHS. |
| 0 | ||
| PE3C1170LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to Reverse Polarity SMA Male Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3C1170LF/HS is a SMA male to reverse polarity SMA male cable using LMR-100A coax. This Pasternack SMA male to reverse polarity SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to reverse polarity male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1170LF/HS SMA male to SMA reverse polarity male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE36170LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 48 inches. N Male to 7/16 DIN Male Cable 48 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male cable 48 inch length using RG217 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 48 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE36170LF-48, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE36170LF-48 is built with RG217 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36170LF-48 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. N type plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 48 inch length using RG217 coax, LF solder. |
| 0 | ||
| PE3C2170LF | Pasternack Enterprises | 0 | ||||
| PE3W19170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: LMR-400-75, RF Cable Type: LMR-400-75, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Cable Using 75 Ohm LMR-400-75 Coax, LF Solder. PE3W19170LF is a N male to N male cable using LMR-400-75 coax. This Pasternack N male to N male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W19170LF N male to N male cable assembly is constructed with LMR-400-75 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C0170LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Right Angle Cable Using LMR-195 Coax with HeatShrink, LF Solder, RoHS. PE3C0170LF/HS is a SMA male right angle to N male right angle cable using LMR-195 coax. This Pasternack SMA male right angle to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0170LF/HS SMA male right angle to N male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047AL, RF Cable Type: PE-SR047AL, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE36170LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to 7/16 DIN Male Cable 36 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male cable 36 inch length using RG217 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 36 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE36170LF-36, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE36170LF-36 is built with RG217 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36170LF-36 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 36 inch length using RG217 coax, LF solder. |
| 0 | ||
| PE36170LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 72 inches. N Male to 7/16 DIN Male Cable 72 Inch Length Using RG217 Coax, LF Solder., Radio frequency assembly N male to 7/16 DIN male cable 72 inch length using RG217 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to 7/16 DIN male cable 72 inch length using RG217 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and 7/16 DIN cable connection on the other. Our N type to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This type N to 7/16 DIN cable is a male to male coax assembly, PE36170LF-72, can also be known as a N type plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. Type N plug to 7/16 DIN plug cable assembly PE36170LF-72 is built with RG217 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36170LF-72 can also be used in the other direction and will be 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Type N plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to 7/16 DIN male cable 72 inch length using RG217 coax, LF solder. |
| 0 | ||
| PE36170LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50. N Male to 7/16 DIN Male Cable Using RG217 Coax, RoHS. PE36170LF is a type N male to 7/16 DIN male cable using RG217 coax. This Pasternack type N male to 7/16 DIN male cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male N type to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36170LF type N male to 7/16 DIN male cable assembly is constructed with RG217 coax. | 0 | |||
| PE3C3170LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. N Female Bulkhead to MCX Plug Cable Using RG223 Coax with HeatShrink, RoHS. PE3C3170LF/HS is a N female bulkhead to MCX plug cable using RG223 coax. This Pasternack N female bulkhead to MCX plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. Our female N bulkhead to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3170LF/HS N female bulkhead to MCX plug cable assembly is constructed with RG223 coax. | 0 | |||
![]() Relay Specialties | CVF170L5 | BlockMaster Blocks | PCB Terminal Block; 17-pos 5.08mm; Plug; Vertical; 15A 300V; 30-12AWG; L-Stack; Green |
| 200 | |
![]() Vyrian | HSMDC170LB | Broadcom Limited | 9,647 | |||
M27C1001-70L1![]() | STMicroelectronics | RoHS : Compliant | 9,233 | |||
| ADC12V170LFEB-NOPB | Texas Instruments | 9,002 | ||||
M27C1001-70L1TR![]() | STMicroelectronics | RoHS : Not Compliant | 8,784 | |||
PSD502B1-70L![]() | STMicroelectronics | 8,019 | ||||
M27C2001-70L6![]() | STMicroelectronics | RoHS : Compliant | 6,450 | |||
ZPSD502B1-70L![]() | STMicroelectronics | 6,231 | ||||
| PSD301-70LI | STMicroelectronics | RoHS : Not Compliant | 5,988 | |||
M27C4001-70L6TR![]() | STMicroelectronics | RoHS : Not Compliant | 5,486 | |||
PSD511B1-70L![]() | STMicroelectronics | 4,995 | ||||
| HSMG-C170(L,E) | Broadcom Limited | 3,809 | ||||
M27C1001-70L6X![]() | STMicroelectronics | RoHS : Compliant | 3,759 | |||
| HSMDC170LC | Broadcom Limited | 3,717 | ||||
ZPSD511B1-70L![]() | STMicroelectronics | 3,581 | ||||
| MMBF170LT1 | NXP Semiconductors | Small Signal Field-Effect Transistor, 0.5A I(D), 60V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-236AB | 267 | |||
![]() Win Source Electronics | MMBF170LT1G![]() | onsemi | Trans MOSFET N-CH 60V 0.5A 3-Pin SOT-23 T/R / MOSFET N-CH 60V 500MA SOT-23 RoHS : Compliant |
| 132,000 | |
| MMBF170LT | onsemi | N-Channel MOSFET 60V 500mA SOT-23 |
| 132,000 | ||
MMBF170LT1![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 / TMOS FET Transistor RoHS : Not Compliant |
| 125,710 | ||
MMBF170LT3G![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 RoHS : Compliant |
| 122,450 | ||
MMBF170LT3![]() | onsemi | MOSFET N-CH 60V 500MA SOT-23 RoHS : Not Compliant |
| 120,970 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |