| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
15WCY-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() STMicroelectronics | ESDA6V1-5W6![]() | STMicroelectronics | TRANSIL array for data protection RoHS : Compliant |
| 17,990 | |
| SCT015W120G3-4AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 1200 V, 15 mOhm typ., 129 A in an HiP247-4 package |
| 443 | ||
| EVLHVLED815W10F | STMicroelectronics | HVLED815 based evaluation board: 10 W wide range high power factor isolated LED driver with primary side current regulation |
| 9 | ||
| EVALHVLED815W15 | STMicroelectronics | 15 W high power factor LED driver based on HVLED815PF |
| 0 | ||
| EVLHVLED815W8CV | STMicroelectronics | HVLED815 based evaluation board: 8W European range high power factor LED driver with primary constant voltage regulation |
| 0 | ||
STA515W13TR![]() | STMicroelectronics | 40 V, 3 A quad power half-bridge digital audio amplifier RoHS : Compliant |
| 0 | ||
| EVLHVLED815W10A | STMicroelectronics | HVLED815 based evaluation board: 10 W wide range non-isolated high power factor LED driver with primary side current regulation |
| 0 | ||
![]() ComSIT USA | THL304815WI | Traco Power | AVAILABLE EU | 24 | ||
| 5AR4E0115W | PACIFIC RESISTOR | AVAILABLE EU | 315 | |||
102R15W102KV4E![]() | Johanson Dielectrics Inc | AVAILABLE EU RoHS : Compliant | 4,209 | |||
![]() Interstate Connecting Components | M85049/1815W05 | Amphenol PCD | 38999 SI/II Backshell Env-EMI/RFI |
| 30 | |
| M85049/126S15W | Amphenol PCD | 38999 SIII/IV Backshell Strain Relief |
| 18 | ||
| M85049/124-15W | Amphenol PCD | 38999 SIII/IV Backshell Strain Relief |
| 14 | ||
| M85049/1815W05 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 3 | ||
| M85049/1915W04 | Amphenol PCD | Backshell Non Env-EMI/RFI 38999 SIII/IV |
| 3 | ||
| 8D7S15W35PN | SOURIAU-SUNBANK | J5908 | 0 | |||
| 8DA5-15W18SA | SOURIAU-SUNBANK | RFI Plug Integrated Bckshell OD Cad |
| 0 | ||
| 8DA5-15W35SB | SOURIAU-SUNBANK | RFI Plug Integrated Bckshell OD Cad |
| 0 | ||
| M85049/124-15W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/126S15W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| M85049/15H15W | Glenair Inc | QWIK-TY STRAIN RELIEF RoHS : Not Compliant | 0 | |||
| M85049/1815W05 | SOURIAU-SUNBANK | 0 | ||||
| M85049/1915W04 | SOURIAU-SUNBANK | 0 | ||||
| M85049/1915W04 | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant |
| 0 | ||
| KJA0T15W35SA | ITT Interconnect Solutions | KJA0T15W35SA RoHS : Not Compliant | 0 | |||
![]() NexGen Digital | LQG15WH1N4B02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 15,860 | ||
| LQG15WH1N5C02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 10,975 | |||
| LQG15WH1N7B02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 3,759 | |||
| MKT1817322015W | Vishay Huntington | 2,500 | ||||
| LQG15WZ2N7C02D | Murata Manufacturing Co Ltd | RoHS : Compliant | 447 | |||
| NCU15WF104D60RC | Murata Manufacturing Co Ltd | RoHS : Compliant | 172 | |||
![]() PEI Genesis | 8D015W18SN | SOURIAU-SUNBANK |
| 19 | ||
| 8D015W19SC | SOURIAU-SUNBANK |
| 0 | |||
| 8D115W05SA | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| 8D115W15PC | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| 8D115W97PC | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| 8D3415W05PN | SOURIAU-SUNBANK |
| 0 | |||
| 8D3915W18SN | SOURIAU-SUNBANK |
| 0 | |||
| 8D3915W19SC | SOURIAU-SUNBANK |
| 0 | |||
| 8D515W05SE | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D515W15SN | SOURIAU-SUNBANK |
| 0 | |||
| 8D515W97SN | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D715W35PA | SOURIAU-SUNBANK | RoHS : Not Compliant |
| 0 | ||
| 8DA515W19SE | SOURIAU-SUNBANK |
| 0 | |||
| M85049/124-15W | Amphenol PCD |
| 0 | |||
| M85049/126S15W | Amphenol PCD |
| 0 | |||
![]() PUI | LM1-5-W-G | 1,508 | ||||
| LM1-5-W-A | 1,500 | |||||
| LM1-5-W-R | 1,275 | |||||
| LP1-5-W-R | 851 | |||||
| LP1-5-W-A | 397 | |||||
| LP1-5-W-G | 16 | |||||
| LP1-5-W-R-BK | 11 | |||||
| CT0915W175KL | 5 | |||||
![]() Richardson RFPD | L03S200D15WM![]() | Tamura Corporation of America | Open Loop Current Sensor AC/DC Current ±15V 4-Pin RoHS : Compliant |
| 1 | |
| WAP3015W08-U050D3B0A | Kyocera AVX Components | Antenna Embeded 5.9dBi Gain 2485MHz/7125MHz RoHS : Compliant | 0 | |||
| WCP3015W08-U050D3B0A | Kyocera AVX Components | Antenna Embeded 5.9dBi Gain 2485MHz/7125MHz RoHS : Compliant | 0 | |||
| MSKW24S15W5 | Wall Industries Inc | 5 Watt DC/DCConverter Single and Dual Outputs | 0 | |||
| LANC2415W15 | Wall Industries Inc | 15 Watt DC/DC PowerConverter Module RoHS : Compliant | 0 | |||
| LANC24S15W-LN | Wall Industries Inc | Up to 5 Watts DC-DCConverter Single Output RoHS : Compliant | 0 | |||
| RG5S15W2S | Wall Industries Inc | 2 Watt DC/DC Power Converters RoHS : Compliant | 0 | |||
| LANK4815W10 | Wall Industries Inc | 2:1 Wide Input Range Single and Dual Output 10 Wat RoHS : Compliant | 0 | |||
| WBP3015W08-U100D3B0A | Kyocera AVX Components | Antenna Embeded 5.9dBi Gain 2485MHz/7125MHz RoHS : Compliant | 0 | |||
| LANC2415W12 | Wall Industries Inc | AC/DC Power Supply RoHS : Compliant | 0 | |||
| LANK1215W3HS | Wall Industries Inc | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| WCP3015W08-U150D3B0A | Kyocera AVX Components | Antenna Embeded 5.9dBi Gain 2485MHz/7125MHz RoHS : Compliant | 0 | |||
| RG24S15W3 | Wall Industries Inc | 3 Watt DC/DC PowerConverters RoHS : Compliant | 0 | |||
L03S400D15WM![]() | Tamura Corporation of America | Magnetic Proportion System Current Sensor RoHS : Compliant |
| 0 | ||
| LANC1215W8 | Wall Industries Inc | 8 Watt Single and Dual Output DC to DC Converters RoHS : Compliant | 0 | |||
![]() Rutronik | LQG15WZ33NJ02D | Murata Manufacturing Co Ltd | LQG15WZ 33nH 220mA 5% MLT RoHS : Compliant |
| 350,000 | |
| LQG15WZ39NJ02D | Murata Manufacturing Co Ltd | LQG15WZ 39nH 190mA 5% MLT RoHS : Compliant |
| 140,000 | ||
| LQG15WZ56NJ02D | Murata Manufacturing Co Ltd | LQG15WZ 56nH 180mA 5% MLT RoHS : Compliant |
| 110,000 | ||
| LQG15WZ13NJ02D | Murata Manufacturing Co Ltd | LQG15WZ 13nH 400mA 5% MLT RoHS : Compliant |
| 100,000 | ||
| NCP15WF104J03RC | Murata Manufacturing Co Ltd | NTC 0402 100K 5% B=4250 1% RoHS : Compliant |
| 90,000 | ||
| LQG15WZ5N6B02D | Murata Manufacturing Co Ltd | LQG15WZ 5,6nH 800mA 0,1nH MLT RoHS : Compliant |
| 40,000 | ||
| NCP15WF104F03RC | Murata Manufacturing Co Ltd | NTC 0402 100K 1% B=4250 1% RoHS : Compliant |
| 10,005 | ||
| ESD3B15WS | Diotec Semiconductor AG | ESD PROT.-DIODE 0,35KW 5A 15V SOD-323 RoHS : Compliant |
| 9,000 | ||
| 0297015.WXNV | Littelfuse Inc | 15A 32V fast AUTOMOTIVE MINI RoHS : Compliant |
| 3,000 | ||
| 0297015.WXT | Littelfuse Inc | 1A 32V fast MINI RoHS : Compliant |
| 3,000 | ||
| 0501015.WR | Littelfuse Inc | 15A 32VDC fast Thin version RoHS : Compliant |
| 3,000 | ||
| 0997015.WXN | Littelfuse Inc | 15A 58V AUTO Mini blue RoHS : Compliant |
| 3,000 | ||
| SF15W006S4BR2000 | JAE Electronics | 06P micro SIM CARD holder SMT RoHS : Compliant |
| 2,000 | ||
| OKI-78SR-5/1.5-W36H-C | Murata Manufacturing Co Ltd | SwitchReg 7-36V to 05V 1.5A RoHS : Compliant |
| 100 | ||
![]() Avnet Asia | NSV45015WT1G | onsemi | (Alt: NSV45015WT1G) RoHS : Compliant | 30,000 | ||
| LQG15WZ2N0C02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ2N0C02D) RoHS : Compliant |
| 20,000 | ||
| FK2500115W | Diodes Incorporated | (Alt: FK2500115W) RoHS : Compliant |
| 12,000 | ||
| NCP15WM474E03RC | Murata Manufacturing Co Ltd | Thermistor NTC 470KOhm 3% 2-Pin 0402 Paper T/R (Alt: NCP15WM474E03RC) RoHS : Compliant | 0 | |||
| NCP15WM224J03RC | Murata Manufacturing Co Ltd | (Alt: NCP15WM224J03RC) RoHS : Compliant | 0 | |||
| LQG15WZ4N7S02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ4N7S02D) RoHS : Compliant |
| 0 | ||
| LQG15WH2N8S02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH2N8S02D) RoHS : Compliant | 0 | |||
| NCU15WB473F60RC | Murata Manufacturing Co Ltd | (Alt: NCU15WB473F60RC) RoHS : Compliant | 0 | |||
| LQG15WH2N2S02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH2N2S02D) RoHS : Compliant |
| 0 | ||
| LQG15WH68NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH68NG02D) RoHS : Compliant | 0 | |||
| LQG15WZ56NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ56NG02D) RoHS : Compliant | 0 | |||
| LQG15WZ62NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ62NJ02D) RoHS : Compliant | 0 | |||
| LQG15WZ3N6B02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ3N6B02D) RoHS : Compliant |
| 0 | ||
| LQG15WH0N7S02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH0N7S02D) RoHS : Compliant |
| 0 | ||
| LQG15WZ9N1J02D | Murata Manufacturing Co Ltd | (Alt: LQG15WZ9N1J02D) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | PJSD15W _R1 _00001 | PanJit Semiconductor | (Alt: PJSD15W_R1_00001) RoHS : Compliant | 5,000 | ||
AP7331-15WG-7![]() | Diodes Incorporated | LDO Regulator Pos 15V 03A 5Pin SOT25 TR (Alt: AP7331-15WG-7) RoHS : Compliant | 3,000 | |||
AP7365-15WG-7![]() | Diodes Incorporated | LDO Regulator Pos 15V 06A 5Pin SOT25 TR (Alt: AP7365-15WG-7) RoHS : Compliant | 3,000 | |||
AP7311-15WG-7![]() | Diodes Incorporated | LDO Regulator Pos 15V 015A 5Pin SOT25 TR (Alt: AP7311-15WG-7) RoHS : Compliant | 3,000 | |||
| AP7315Q-15W5-7 | Diodes Incorporated | High PSRR Low Dropout Regulator 15V 5Pin SOT25 TR (Alt: AP7315Q-15W5-7) RoHS : Compliant | 3,000 | |||
| AP7354D-15W5-7 | Diodes Incorporated | LDO Voltage Regulator Fixed 2 V55 V in 15 Vnom150 mA out 430 mV Drop SOT25 (Alt: AP7354D-15W5-7) RoHS : Compliant | 3,000 | |||
| SD2931-15W | STMicroelectronics | (Alt: SD2931-15W) RoHS : Compliant | 50 | |||
| X9315WSZT1 | Renesas Electronics Corporation | (Alt: X9315WSZT1) RoHS : Compliant | 0 | |||
| DGD0215WT-7 | Diodes Incorporated | Gate Driver Low Side IGBT MOSFET Inverting NonInverting 1 Channel TSOT255 45 V to 18 V (Alt: DGD0215WT-7) RoHS : Compliant | 0 | |||
| STA515WJ13TR | STMicroelectronics | (Alt: STA515WJ13TR) RoHS : Compliant | 0 | |||
| WCT-15WAUTO13 | NXP Semiconductors | Wireless Charging Transmitter 15W (Alt: WCT-15WAUTO13) RoHS : Compliant | 0 | |||
| MIC37300-1.5WR | Microchip Technology Inc | 3A LOW VOLTAGE LDO REGULATOR (Alt: MIC37300-1.5WR) RoHS : Compliant | 0 | |||
| SZ8-Y15-W0-CM-A | Seoul Semiconductor | Wicop2 High Power LED FOR MEDICAL CCT 6500K CRI90 (Alt: SZ8-Y15-W0-CM-A) RoHS : Compliant | 0 | |||
| EVLHVLED815W8CV | STMicroelectronics | (Alt: EVLHVLED815W8CV) RoHS : Compliant | 0 | |||
| AP7343DQ-15W5-7 | Diodes Incorporated | (Alt: AP7343DQ-15W5-7) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WAP3015W08-H100D3B0A | Kyocera AVX Components | WX-Family Wi-Fi 6E & 7 PCB antenna, 100mm cable, MHF4L connector - Radiation Pattern A RoHS : Compliant |
| 1 | |
| EX15-WX07-OUS | Digi International Inc | Digi 360 Cellular Solution Package for Digi EX15 (1 year) - LTE, Cat 7, US/CAN, RS-232, 1 Serial Port, Wi-Fi, Dual Ethernet. Includes: PSU, PoE injector, site survey battery, mounting accessories, eth |
| 0 | ||
| ASB-EX15-WX11-GLB | Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Euro, Wi-Fi; CAT 11; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, CE, RED; International plug tips UK, EU, AU (INCLUDES PSU, POE |
| 0 | ||
| ASB-EX15-WX04-OUS | Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, North American, Wi-Fi; CAT 4; LTE / HSPA+; Cellular certifications: Verizon, AT&T, PTCRB, Canada (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATTERY, MOUNTING ACCESS |
| 0 | ||
| ASB-EX15-WX11-OUS | Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, North America, Wi-Fi; CAT 11; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, Canada (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATT |
| 0 | ||
| ASB-EX15-WX06-GLB | Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Euro, Wi-Fi; CAT 6; LTE-A / HSPA+; Cellular certifications: Verizon, AT&T, Sprint, T-Mobile, PTCRB, CE, RED; International plug tips UK, EU, AU (INCLUDES PSU, POE |
| 0 | ||
| ASB-EX15-WXE4-GLB | Digi International Inc | Digi EX15: 2 port GigE; RJ-45 RS232, Wi-Fi; CAT 4; LTE / HSPA+; Cellular certifications: PTCRB, CE, RED; International Plug tips for EU, AU and UK (INCLUDES PSU, POE INJECTOR, SITE SURVEY BATTERY, M |
| 0 | ||
| MAX1015.W.001 | Taoglas Antenna Solutions | 15-IN-1 WHITE PERMANENT MOUNT AN |
| 0 | ||
![]() Chip-Germany GmbH | PSAA15W-480V | Phihong USA | 15 | |||
![]() Component Electronics, Inc | 500R15W104KV4T![]() | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 12,000 | |
| NCP15WF104J03RC | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 10,650 | ||
500R15W223KV4T![]() | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 9,600 | ||
| 500R15W123KV2E | Johanson Dielectrics Inc | IN STOCK SHIP TODAY | 3,069 | |||
| 201R15W223KV4E | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3,000 | ||
ESDA6V1-5W6![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,370 | ||
| 500R15W472JV4E | Johanson Dielectrics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,000 | ||
| PT15WV15-104A2020E | Amphenol Piher | IN STOCK SHIP TODAY |
| 117 | ||
| MKT1817347015W | Vishay Roederstein | IN STOCK SHIP TODAY |
| 116 | ||
| NCP15WM474J03RC | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | ||
| 20CAT-415WH | IN STOCK SHIP TODAY |
| 46 | |||
| BNDH15WPN25 | IDEC Corporation | IN STOCK SHIP TODAY |
| 25 | ||
| BNE15W | IDEC Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 24 | ||
| 215W2282AKB13NG | ATI Technologies Inc | IN STOCK SHIP TODAY | 6 | |||
XC7336-15WC44C![]() | AMD Xilinx | IN STOCK SHIP TODAY RoHS : Not Compliant | 1 | |||
![]() DB Roberts | RKW-12-15-W | Essentra Components | CABLE TIE, HOOK LOOP, WHITE | 0 | ||
| 22MP11815W | Essentra Components | SNAP BUSHING, 1.187 HOLE, .937 | 0 | |||
| PGM-15WH | Essentra Components | 0 | ||||
| F6-22-S1-5W1 | Southco | 0 | ||||
| SRL1-5-WH6A | Essentra Components | Raceway.Wht.6 Ft Length.72 Ft /Bundle.1 PKG72 Ft | 0 | |||
| F6-22-S1-5W13 | Southco | 0 | ||||
| RSLG115W | Essentra Components | RIVETS SNAP LATCHES - GROMMETN | 0 | |||
| HG-JHM14-S-15WT | Sugatsune Kogyo Co Ltd | MORTISE MOUNT SOFT CLOSING HIN | 0 | |||
| 22MP10915W | Essentra Components | SNAP BUSHING, 1.093 HOLE, .937 | 0 | |||
| 22MP01015W | Essentra Components | 0 | ||||
| HG-MF15-WT | Sugatsune Kogyo Co Ltd | TORQUE HINGE | 0 | |||
| RSLP215W | Essentra Components | RIVETS SNAP LATCHES - PLUNGERN | 0 | |||
| 17015W | Heyco | HSLPB-4L WHITE | 0 | |||
| RP115W | Essentra Components | RIVETS PUSHNYLON WHITE | 0 | |||
| 27SR157315W | Essentra Components | SNAP RIVET, .162-.166 HOLE, .1 | 0 | |||
![]() EBV Elektronik | ESDA6V1-5W6![]() | STMicroelectronics | ESD Protection Device TVS SOT323 6 Pins 125 V ESDA6 (Alt: ESDA6V1-5W6) RoHS : Compliant | 0 | ||
STA515W13TR![]() | STMicroelectronics | Quad Power Half Bridge 36Pin PowerSSO EP TR (Alt: STA515W13TR) RoHS : Compliant | 0 | |||
| STA515WJ13TR | STMicroelectronics | (Alt: STA515WJ13TR) RoHS : Compliant | 0 | |||
| NSV45015WT1G | onsemi | LED Driver Constant Current Regulator 15 mA 45 V ONSSPCPRTCNZZ1J5W (Alt: NSV45015WT1G) RoHS : Compliant | 0 | |||
NSI45015WT1G![]() | onsemi | LED Driver Constant Current Regulator 15 mA 45 V ONSSPCPRTCNZZ1J5W (Alt: NSI45015WT1G) RoHS : Compliant | 0 | |||
| ATMEGA8515-W | Microchip Technology Inc | 26 MHz Green Wafer 20 mil backgrind (Alt: ATMEGA8515-W) RoHS : Compliant | 0 | |||
| BYV415W-600PQ | WeEn Semiconductor Co Ltd | (Alt: BYV415W-600PQ) RoHS : Compliant | 0 | |||
| HNA1515W-OS01 | Everlight Electronics Co Ltd | (Alt: S10C014576) RoHS : Compliant | 0 | |||
| MIC37100-1.5WS | Microchip Technology Inc | LDO Voltage Regulator Fixed 225 V to 6 V 1 Output 280mV 1A 15 V 1 A 3 Pins SOT223 (Alt: MIC37100-1.5WS) RoHS : Compliant | 0 | |||
| MIC37301-1.5WR | Microchip Technology Inc | (Alt: MIC37301-1.5WR) RoHS : Compliant | 0 | |||
| MIC49300-1.5WR | Microchip Technology Inc | (Alt: MIC49300-1.5WR) RoHS : Compliant | 0 | |||
| SCT015W120G3-4AG | STMicroelectronics | Silicon Carbide MOSFET AECQ101 Single N Channel 129 A 12 kV 002 ohm HiP247 (Alt: SCT015W120G3-4AG) RoHS : Compliant | 0 | |||
| MIC37100-1.5WS-TR | Microchip Technology Inc | 10A LOW VOLTAGE UCAP LDO REGULATOR (Alt: MIC37100-1.5WS-TR) RoHS : Compliant | 0 | |||
| OC12301015WLB16XTMA9 | Infineon Technologies AG | (Alt: SP006272029) RoHS : Compliant | 0 | |||
![]() ECCO | A850491115W | Amphenol PCD |
| 19 | ||
| M85049/11-15W | Amphenol PCD |
| 19 | |||
![]() FDH Electronics | 8D7-15W19SA | SOURIAU-SUNBANK | Connector RoHS : Not Compliant | 377 | ||
| 8D7-15W15PN-LC | SOURIAU-SUNBANK | Connector RoHS : Not Compliant |
| 270 | ||
| 8D7-15W15AC | SOURIAU-SUNBANK | Connector RoHS : Unknown |
| 122 | ||
| 8D5-15W05PA | SOURIAU-SUNBANK | Connector RoHS : Unknown |
| 90 | ||
| 8D7-15W97AC | SOURIAU-SUNBANK | Connector 38999 RoHS : Unknown | 84 | |||
| M85049/1815W05 | Amphenol PCD | Connector Acc |
| 42 | ||
| M85049/124-15W | Amphenol PCD | Connector Acc |
| 32 | ||
| M85049/1915W04 | Amphenol Interconnect India Pvt Ltd | Connector Acc |
| 17 | ||
| M85049/124-15W | Glenair Inc | Connector Acc RoHS : Not Compliant | 0 | |||
| M85049/126S15W | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 0 | |||
| M85049/126S15W | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/1815W05 | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 0 | |||
| M85049/1915W04 | Amphenol PCD | Connector Acc |
| 0 | ||
| M85049/1915W04 | Glenair Inc | Backshells & Ac RoHS : Not Compliant | 0 | |||
| 770-015515W1 | Glenair Inc | Connector RoHS : Compliant | 0 | |||
![]() Flip Electronics | ESS015W-0440-25 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 2,050 | |
| ESS015W-0440-34 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 1,650 | ||
| ESSV015W-0300-42 | Energy Recovery Products | Stock, Ship Today |
| 574 | ||
| ESS015W-1000-12 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 513 | ||
| ESS015W-1050-14 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant |
| 485 | ||
| PLB15W-0300-38 | Energy Recovery Products | Stock, Ship Today |
| 312 | ||
| ESS015W-0350-32 | Energy Recovery Products | Stock, Ship Today RoHS : Compliant | 28 | |||
![]() Maritex | BZX84C15W-7-F | Diodes Incorporated | Zener Diodes; BZX84C15W-7-F; DIODES; 3; 15 V; 100 nA; Single RoHS : Compliant |
| 2,698 | |
| JRC-23FHS1DC9V0.15W | Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 9VDC; changeover contact (1C); coil power: 150mW; 1A/30VDC; 0.5A/125VAC |
| 1,240 | ||
| JRC-23FHS1DC24V0.15W | Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 24VDC; changeover contact (1C); coil power: 150mW; 1A/30VDC; 0.5A/125VAC |
| 984 | ||
| JRC-23FHS1DC5V0.15W | Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 12VDC; changeover contact (1C); moc cewki: 150mW; 1A/30VDC; 0.5A/125VAC |
| 585 | ||
| JRC-23FHS1DC12V0.15W | Ningbo Forward Relay Corporation Ltd | Electromagnetic relay; contact rating current 1A; coil voltage 12VDC; changeover contact (1C); moc cewki: 150mW; 1A/30VDC; 0.5A/125VAC |
| 583 | ||
| YFGC015WWA | Quectel Wireless Solutions Co Ltd | Antenna; patch; GNSS; 1561-1606MHz; 2.1dBi; VSWR<6.2; RHCP; Directional; pin; 15x15x4mm |
| 280 | ||
| ADBMS6815WCSWZ | Analog Devices Inc | Battery Management ICs; ADBMS6815WCSWZ; ANALOG DEVICES; 48 RoHS : Compliant |
| 52 | ||
NSI45015WT1G![]() | onsemi | LED Drivers; NSI45015WT1G; ON SEMICONDUCTOR; Surface Mount; 1; No; 15 mA RoHS : Compliant |
| 15 | ||
| 0297015.WXNV | Littelfuse Inc | Fuses; 0297015.WXNV; LITTELFUSE; 4.58 m?; 15 A; Holder, Socket; 32 V RoHS : Compliant |
| 9 | ||
| SYS1530-1215-W2E-2.1 | Sunny Electronics Corp | Power Supply; wall-mounted; 12W; 15V; 0.8A |
| 3 | ||
![]() Neutron USA | AC15WNA-R | Phihong USA | AC Power Cords 2-WIRE AC CORD RoHS : Compliant |
| 0 | |
| THL 20-2415WI | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| V15-W-10M-PUR | PEPPERL + FUCHS AUTOMATION | Cordset, M12, Female Right Angle, 5 Pin, Single, 10 Meter, PUR, Gray |
| 0 | ||
| TEP 160-4815WIR | Traco Power | Isolated DC/DC Converters |
| 0 | ||
| TEP 75-2415WI-CMF | Traco Power | Isolated DC/DC Converter 77W 24VDC 3.2A, 9-36VDCin, Enclosed, Chassis Mt w/Filter |
| 0 | ||
| K52115WW | Kensington Computer Products Group | FP315W9 PRIVAC SCREEN FOR 27IN WIDE 16:9 |
| 0 | ||
| RK 4.4T-1.5-WS 4.4T | TURCK Inc | Cordset, M12 Female Straight to M12 Male R/A, 4 Wire, 1.5m, PVC, Gray, U2444-6 |
| 0 | ||
| TMR 12-4815WI | Traco Power | Isolated DC/DC Converters 12W 18-75Vin 24Vout 500mA Ultra compact SIP-8 metal casing |
| 0 | ||
LB15WKW01-01-JB![]() | NKK Switches | Pushbutton Switches - Industrial STD SIZE PUSHBUTTON ILLUMINATED/IP RATED RoHS : Compliant |
| 0 | ||
| K67915WW | Kensington Computer Products Group | USB PORT LOCK WITH CABLE GUARD- SQUARE |
| 0 | ||
| THN 30-7215WIR | Traco Power | Isolated DC/DC Converters 36-160Vin 24V 1250mA, 30 Watt, railway, regulated, 3000VDC isolation, encapsulated, 1 x1 metal enclosure |
| 0 | ||
| TDN 1-1215WISM | Traco Power | Isolated DC/DC Converters 1W SMT Iso 4.5-18Vin 24Vout 45mA |
| 0 | ||
| TDN 5-0915WI | Traco Power | Isolated DC/DC Converters 4.5-12Vin 24Vout 210mA 5W Iso DIP |
| 0 | ||
| TEL 10-2415WI | Traco Power | Isolated DC/DC Converters 10W 9-36Vin 24Vout 416mA DIP16 Iso |
| 0 | ||
| TEN 10-11015WIRH | Traco Power | Isolated DC/DC Converters 10W 36-160Vin 24V 416mA, 4000 VAC Isolation, Railway, DIP24 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8815/WH | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-WH coax. | 593 | ||
| PE3C8815/WH-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-12, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-12 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-WH coax. |
| 209 | ||
| PE3C8815/WH-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-36, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-36 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-36 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-WH coax. |
| 200 | ||
| PE3C8815/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-72, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 100 | ||
| PE3C8815/WH-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-120 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-WH coax. |
| 60 | ||
| PE3C8815/WH-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-300, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-300 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-300 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-WH coax. |
| 24 | ||
| PE3C7015/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-24 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-24 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7015/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-48 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-48 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7015/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-60 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-60 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C7015/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3C7015/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 4.3-10 Male (Plug) to N Male (Plug) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to N male (plug) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low loss 4.3-10 to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C7015/WP-36 can also be known as a low loss 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7015/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C7015/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C7015/WP-36 can also be used in the other direction and will be a type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Waytek, Inc. | 0297015.WXNV | Littelfuse Inc | 15 Amp Mini Automotive Fuse Blue 32V RoHS : Compliant |
| 179,223 | |
| 14/1 UL1015 WHITE | Unified Wire and Cable Inc | 14GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 14,750 | ||
| 16/1 UL1015 WHITE | Unified Wire and Cable Inc | 16GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 14,250 | ||
| 10/1 UL1015 WHITE | Unified Wire and Cable Inc | 10GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 13,500 | ||
| 12/1 UL1015 WHITE | Unified Wire and Cable Inc | 12GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 4,000 | ||
| 20/1 UL1015 WHITE | Unified Wire and Cable Inc | 20GA White MWT/AWM Wire Tinned Copper 600V, 1000V DISC WAY |
| 3,000 | ||
| LM1-5-W-G | Switch Components Inc | Green LED Panel Mount 12V Metal Body-Wire Leads |
| 1,059 | ||
| LM1-5-W-A | Switch Components Inc | Amber LED Panel Mount 12V Metal Body-Wire Leads |
| 989 | ||
| LM1-5-W-R | Switch Components Inc | Red LED Panel Mount 12V Metal Body-Wire Leads |
| 953 | ||
| 15W47-B | Leviton Manufacturing Co | Leviton 15W47-B Wetguard watertight straight blade connector is an industrial-grade NEMA 5-15R, 2P, 3W receptacle for demanding power connections. It features IP66, IP67 and IP69K ingress protection, a tongue-and-groove seal against water and debris, and operates from -40F to 140F. |
| 7 | ||
| 18/1 UL1015 WHITE | Unified Wire and Cable Inc | 18GA White MTW/AWM Wire Bare Copper 600V, 1000V UL 1015/1230/1032 CSA TEW |
| 0 | ||
![]() Wuhan P&S | ESDA6V1-5W6![]() | STMicroelectronics | 6.1V,1mA,Unidirectional TRANSIL array for data protection RoHS : Compliant |
| 3,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |