 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1410TTTDR10 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | TJA1410BTK/0J | NXP Semiconductors | Ethernet Controller, PMD Transceiver, IEEE 802.3cg, ISO 26262, 8 Pins, HVSON - Tape and Reel (Alt: TJA1410BTK/0J) RoHS : Compliant |
| 6,000 | |
| 1410142-1 | TE Connectivity | - Rail/Tube (Alt: 1410142-1) RoHS : Not Compliant |
| 5,582 | ||
| 1410189-3 | TE Connectivity | Connector, MULTIGIG RT, 8 Contacts, 1.8 mm, Plug, Through Hole, 7 Rows - Rail/Tube (Alt: 1410189-3) RoHS : Not Compliant |
| 2,516 | ||
| 1410189-4 | TE Connectivity | - Rail/Tube (Alt: 1410189-4) RoHS : Compliant |
| 1,121 | ||
| 1410186-1 | TE Connectivity | Connector, MULTIGIG RT, 8 Contacts, 1.8 mm, Plug, Through Hole, 8 Rows - Rail/Tube (Alt: 1410186-1) RoHS : Not Compliant |
| 909 | ||
| 1410965-2 | TE Connectivity | - Rail/Tube (Alt: 1410965-2) RoHS : Compliant |
| 562 | ||
| 1410971-3 | TE Connectivity | - Rail/Tube (Alt: 1410971-3) RoHS : Not Compliant |
| 220 | ||
| 1410975-3 | TE Connectivity | Conn Daughter Card Plug 112 Position 1.8mm Press Fit Right-Angle Through Hole - Bag (Alt: 1410975-3) RoHS : Not Compliant |
| 68 | ||
| MCP33141-05-E/MS | Microchip Technology Inc | ADC Single SAR 500ksps 12-bit Serial Microwire/SPI 10-Pin MSOP Tray - Rail/Tube (Alt: MCP33141-05-E/MS) RoHS : Compliant |
| 25 | ||
| DFP1410XXXXSS1416 | Vishay Intertechnologies | DFP14-10-S16 S14 - Trays (Alt: DFP1410XXXXSS1416) RoHS : Compliant |
| 20 | ||
| 1410478C | Murata Manufacturing Co Ltd | Inductor, 1400 Series, 100 ?H, 7.8 A, 7.8 A, 0.04 ohm, ? 10% - Boxed Product (Development Kits) (Alt: 1410478C) RoHS : Compliant |
| 12 | ||
| 23141000 | Toradex Inc | 23141000AQUILAHEATSINKACTIVETYPE1 - Bulk (Alt: 23141000) RoHS : Compliant | 10 | |||
| 1410-P-17-00-3.00 | 3M Interconnect | Cable Assembly Twinaxial 3m 20POS SFP+ to 20POS SFP+ Plug-Plug Bulk - Bulk (Alt: 7100043601) RoHS : Compliant |
| 5 | ||
| XR21V1410IL-0C-EB | MaxLinear Inc | 1-Ch 12 Mbps Full-Speed USB UART Evaluation Board - Boxed Product (Development Kits) (Alt: XR21V1410IL-0C-EB) RoHS : Not Compliant |
| 3 | ||
| XR21V1410IL-0B-EB | MaxLinear Inc | 1-Ch 12 Mbps Full-Speed USB UART Evaluation Board - Boxed Product (Development Kits) (Alt: XR21V1410IL-0B-EB) RoHS : Not Compliant |
| 3 | ||
 Newark | 7447714101 | Wurth Elektronik | Pd Inductor, 100 Uh, I=1.5 A, 1050; |Würth Elektronik 7447714101 RoHS : Compliant |
| 2,244 | |
| 7447714101 | Wurth Elektronik | Pd Inductor, 100 Uh, I=1.5 A, 1050; |Würth Elektronik 7447714101 RoHS : Compliant |
| 2,244 | ||
| MTSW-114-10-S-D-620 | Samtec Inc | Variable Height Pcb Head Strips; |Samtec, Inc. MTSW-114-10-S-D-620 RoHS : Compliant |
| 533 | ||
| TSW-141-07-G-D | Samtec Inc | Header, 2.54Mm, Tht Vert, 82Way; |Samtec, Inc. TSW-141-07-G-D RoHS : Compliant |
| 243 | ||
| MTSW-141-07-T-S-130-RA | Samtec Inc | Pin Header, Mtsw-141-07-T-S-130-Ra; |Samtec, Inc. MTSW-141-07-T-S-130-RA RoHS : Compliant |
| 75 | ||
| LPS3314-102MRC | Coilcraft Inc | Inductor, 1Uh, 20%, 1.6A, Shld, Smd; |Coilcraft LPS3314-102MRC RoHS : Compliant |
| 42 | ||
| LPS3314-102MRC | Coilcraft Inc | Inductor, 1Uh, 20%, 1.6A, Shld, Smd; |Coilcraft LPS3314-102MRC RoHS : Compliant |
| 42 | ||
| HC-14103 | BUD Industries Inc | Chassis; |Bud Industries HC-14103 RoHS : Compliant |
| 15 | ||
| 095-725-114-100 | Amphenol RF | Rf Cable, Smpm Plug-R/A Plug, 10"; |Amphenol Rf 095-725-114-100 RoHS : Compliant |
| 15 | ||
| 46114-1017 | Molex | Card Edge & Backplane Connector, 46114 S; |Molex 46114-1017 (Alternate Part Number: 756054922606 RoHS : Compliant |
| 10 | ||
| BU-3261410-2 | Mueller Electric Company | Conn, Plug, 45A, 1Kv, Red; |Mueller Electric BU-3261410-2 RoHS : Compliant |
| 7 | ||
| 12914-10 | 3M Interconnect | 3M Shrunk Delta Ribbon Sdr, Tooling; |3M 12914-10 RoHS : Not Compliant |
| 1 | ||
| SLC4-F14-106 | TE Connectivity | Safety Light Curtain, 6M, 2Pnp, 105 Beam; Performance Level:Pl E; Safety Curtain Category:Level 4; Safety Integrity Level:Sil3, Sil Cl3; No. Of Beams:105; Protection Height:1.06M; Sensing Range Max:6M; Ip Rating:Ip65, Ip67 Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
| SLC4-F14-106 | TE Connectivity | Safety Light Curtain, 6M, 2Pnp, 105 Beam; |Te Connectivity SLC4-F14-106 RoHS : Compliant |
| 1 | ||
| 1410 | Platt Electric | Equipment Carrying Case; Carrying Case Material:Plastic; Case Color:Black; External Height - Imperial:10.5"; External Height - Metric:266.7Mm; External Width - Imperial:7.3"; External Width - Metric:184.2Mm; Product Range:- Rohs Compliant: Na |Platt 1410 RoHS : Not Compliant |
| 0 | ||
 RS | 92315-1410 (923151410) | Molex | RIBBON CABLE ASSEMBLY 14 WAY FEMALE PICOFLEX TO 14 WAY FEMALE PICOFLEX |
| 860 | |
| 09-50-3141 (09-50-3141-P) | Molex | KK 396 SERIES 3.96MM PITCH 14 WAY 1 ROWFEMALE STRAIGHT PCB HOUSING 2139 |
| 461 | ||
| 1-2314101-1 | TE Connectivity | CIRCULAR METRIC CONNECTOR M12 CRIMP CONTACT SOCKET 0.8MM AWG22 RoHS : Compliant |
| 57 | ||
| 5500.2029 (FMLB-0141-0640) | Schurter Electronic Components | FILTER 1-STAGE AC GENERAL PURPOSE LINE 1 PH OP-V 125 (UL/CSA) 250 (IEC)VAC 6A |
| 50 | ||
| 1410727 (SAC-2P-10 0-PUR/DTFS) | Phoenix Contact | CABLE ASSEMBLY, VALVE CONNECTOR, STRAIGHT, 2 POSITIONS, 10M, BLACK |
| 34 | ||
| Y141062-02-24VDC | Norgren | VALVE, S1,3WMP, OXY,1/8NPT, SS, GRM, VTN, |
| 4 | ||
| R14-100-R20A | Norgren | REGULATOR, 1/8" PTF, AIR, PRESET 20 PSI, GAUGE PORTS, RELIEVING, R14 SERIES |
| 2 | ||
| B-814-10 (B081410) | Isostatic Industries Inc | SLEEVE BEARING, B-814-10 .502 X .878 X 1-1/4IN, POWDERED METAL BRONZE |
| 2 | ||
| 1410396 (QPD W 4PE6 0 M25 0 5 BK) | Phoenix Contact | CABLE ASSEMBLY;QPD W 4PE6 0 M25 0 5 BK |
| 2 | ||
| HC-14103 | BUD Industries Inc | ENCLOSURE, CHASSIS, RACKMOUNT, ALUMINUM, WHITE, 16.938X13X5.25 IN, VALULINE SERIES RoHS : Compliant |
| 1 | ||
| 130141-0063 (2648) | Woodhead Molex | SUPER-SAFEWAY PLUG WITH LOCKING BLADE, 2 POLE/3 WIRE, NEMA L6-20, 250V |
| 1 | ||
| MS4-EE-1/4-10V24-S-Z (542599) | Festo | AIR ON OFF VALVE, 24 VDC, 2000 L/MIN, 4 TO 10 BAR, G1/4 SILENCER, MS4 SERIES |
| 1 | ||
| 1410 | Adafruit Industries | ONION PI PACK W/ WIFI MODULE - MAKE A RASPBERRY PI B+ TOR PROXY |
| 0 | ||
| 1410 | Dichtomatik | O-RING, 89,00 4,50 70 NBR NB7027 |
| 0 | ||
| 1410 | RACO | INSULATED BUSHING 2-1/2" PLASTIC |
| 0 | ||
 Microchip Technology Inc | TC1410NCPA | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, N-Inv, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 15,300 | |
| TC1410NEPA | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, N-Inv, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 14,280 | ||
TC1410EUA713 | Microchip Technology Inc | 0.5A Single Inverted MOSFET driver, MSOP, Projected EOL: 2036-10-23 RoHS : Compliant |
| 12,500 | ||
| TC1410NEUA713 | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, N-Inv, MSOP, Projected EOL: 2036-10-23 RoHS : Compliant |
| 12,500 | ||
TC1410COA713 | Microchip Technology Inc | 0.5A SINGLE MOSFET DRIVER, INVERTED, SOIC, Projected EOL: 2036-06-10 RoHS : Compliant |
| 12,200 | ||
| TC1410COA | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, Inv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 12,000 | ||
| TC1410NEOA713 | Microchip Technology Inc | 0.5A SINGLE MOSFET DRIVER, INVERTED, SOIC, Projected EOL: 2036-06-12 RoHS : Compliant |
| 10,092 | ||
| TC1410NCOA | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, N-Inv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,800 | ||
| TC1410NCOA713 | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, N-Inv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,600 | ||
AT97SC3204-X4A14-10 | Microchip Technology Inc | ffTPM LPC C7b LARI Com 4.4mm TSSOP w/UEK, TSSOP, Projected EOL: 2041-08-25 RoHS : Compliant |
| 3,710 | ||
| TC1410EOA713 | Microchip Technology Inc | 0.5A SINGLE MOSFET DRIVER, INVERTED, SOIC, Projected EOL: 2036-06-14 RoHS : Compliant |
| 3,300 | ||
| MCP33141-025-E/MS | Microchip Technology Inc | 12 Bit 250 ksps SAR ADC Single-Ended Input, MSOP, Projected EOL: 2050-12-11 RoHS : Compliant |
| 1,700 | ||
| MCP33141-05-E/MS | Microchip Technology Inc | 12-bit, 500KSPS Low Power Single Ended SAR ADC, MSOP, Projected EOL: 2046-06-13 RoHS : Compliant |
| 1,000 | ||
| TC1410EOA | Microchip Technology Inc | 0.5A Sngl MOSFET Drvr, Inv, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 50 | ||
| OX-228-0014-10M0000000 | Microchip Technology Inc | OX-228-0014-10M0000000, Projected EOL: 2051-02-13 - Contact for Pricing RoHS : Compliant | 21 | |||
 Bisco Industries | MS3214-10 | PennEngineering (PEM) | 10,510 | |||
| MS14101-6 | RBC Bearings Incorporated | 5,534 | ||||
| SS1410 | Buckeye Fasteners | 2,340 | ||||
| 0338-0-15-80-15-14-10-0 | Mill-Max Mfg Corp | RoHS : Compliant | 2,090 | |||
| 0279-0-15-01-47-14-10-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 1,019 | |||
| MS14103-5P | RBC Bearings Incorporated | 870 | ||||
| MS14103-5P | New Hampshire Ball Bearings Inc | 326 | ||||
| 0566-2-15-15-21-14-10-0 | Mill-Max Mfg Corp | RoHS : Compliant | 206 | |||
| MS14103-16 | RBC Bearings Incorporated | 101 | ||||
| 114108-594SS-12A | Accurate Screw Machine | 81 | ||||
| BU-3261410-2 | Mueller Electric Company | 50 | ||||
| MS3214-10 | MS Nuts | 7 | ||||
| MS14108-11 | Indiana Aircraft Hardware | 5 | ||||
| 09-9014-1-03 | Staffall | 3 | ||||
| MS14101-6 | MS Bearings/Bushings | 1 | ||||
 Rochester Electronics | PXN014-100QEJ | NXP Semiconductors | PXN014-100QE/SOT8002/MLPAK33 RoHS : Compliant |
| 13,435 | |
| SCH1410-TL-E | onsemi | SCH1410 - NCH 2.5V DRIVE SERIES RoHS : Compliant |
| 5,000 | ||
ADSP-1410SD | Analog Devices Inc | Word-Slice Address Generator Cover requirements for CMOS monolithic Address Generator 48-DIP RoHS : Not Compliant |
| 260 | ||
| ADSP-1410KD | Analog Devices Inc | Word-Slice Address Generator Cover requirements for CMOS monolithic Address Generator 48-DIP RoHS : Not Compliant |
| 2 | ||
| ADSP-1410JN | Analog Devices Inc | Word-Slice Address Generator Cover requirements for CMOS monolithic Address Generator RoHS : Not Compliant |
| 475 | ||
| ADSP-1410TD | Analog Devices Inc | Word-Slice Address Generator Cover requirements for CMOS monolithic Address Generator 48-DIP RoHS : Not Compliant |
| 2 | ||
ADUM1410BRWZ-RL | Analog Devices Inc | Digital Isolators General Purpose 25kV/µs 16-SOIC T/R RoHS : Compliant |
| 410 | ||
| ADSP-1410TE/+ | Analog Devices Inc | Word-Slice Address Generator Cover requirements for CMOS monolithic Address Generator RoHS : Not Compliant |
| 36 | ||
8414101EA | Texas Instruments | IC Data Selector/Multiplexer 1 Element 1 x 8:1 MUX/DEMUX 4.5V - 5.5V 16-DIP Tube RoHS : Not Compliant |
| 115 | ||
PCI1410GGU | Texas Instruments | PCMCIA Bus Controller, CMOS, PBGA144 RoHS : Not Compliant |
| 160 | ||
PCI1410RFP | Texas Instruments | PCMCIA Bus Controller, CMOS, PQFP144 |
| 1,735 | ||
| PCI1410APGE | Texas Instruments | PCMCIA Bus Controller, CMOS, PQFP144 RoHS : Compliant |
| 10,484 | ||
| PCI1410PGE | Texas Instruments | PCMCIA Bus Controller, CMOS, PQFP144 RoHS : Compliant |
| 49,819 | ||
| PCI1410AGGU | Texas Instruments | PCMCIA Bus Controller, PBGA144 RoHS : Not Compliant |
| 1,846 | ||
| PCI1410ARFP | Texas Instruments | PCMCIA Bus Controller, PQFP144 |
| 4,465 | ||
 Sager | 801-41-014-10-004000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | |
| 851-41-014-10-021000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER | 0 | |||
| 801-41-014-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 851-41-014-10-002000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 801-41-014-10-003000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant | 0 | |||
| 801-41-014-10-013000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant | 0 | |||
| 801-41-014-10-002000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant | 0 | |||
| 851-41-014-10-001000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 831-41-014-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 851-41-014-10-011000 | Mill-Max Mfg Corp | IC & Component Sockets STANDARD SOCKET HEADER | 0 | |||
| 801-41-014-10-012000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD SOCKET HEADER RoHS : Compliant |
| 0 | ||
| 1SET141018R0000 | TE Connectivity | Terminals | 0 | |||
| 216141-000 | TE Connectivity | TE Connectivity 55A0111-18-90 RoHS : Compliant |
| 0 | ||
| 2210-S211-P1T1-Z141-0.5A | E-T-A | Circuit Breakers 1077, 1P, PL, 277VAC/65VDC, T1, 1NC AUX INT and ON, 0.5A RoHS : Compliant |
| 0 | ||
| 1731141073 | Molex | FCT FILTER STR SDR PLG 15 PN W/CLINCH |
| 0 | ||
 TME | GWMM1410025 | Signal Construct Gmbh | Accessories: Nut M14x1; metal |
| 310 | |
| DM100-0200-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 200mm; Y: 100mm |
| 307 | ||
| E002214-10K | Molex | E002214-10K |
| 240 | ||
| DM100-0070-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 70mm; Y: 100mm |
| 169 | ||
| DM108-0050-14-100Z(H) | Degson Electronics Co Ltd | Accessories: enclosure base; Y: 108mm; X: 50mm; Z: 28.7mm; green |
| 153 | ||
| DM100-0300-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 300mm; Y: 100mm |
| 86 | ||
| 1410 | Bahco | Pliers: adjustable; 320mm; steel |
| 0 | ||
| DM108-0150-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 150mm; Y: 108mm |
| 0 | ||
| DM108-0250-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 250mm; Y: 108mm |
| 0 | ||
| GKS-075 214 100 A 2000 C | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 3A; Ø: 1mm; GKS-075; steel; 2N; push-in; 100mΩ |
| 0 | ||
| GKS-075 214 100 A 2802 M | Ingun Prufmittelbau GmbH | Test probe: screw-in; 3A; Ø: 1mm; GKS-075; steel; 2.8N; screw-in |
| 0 | ||
| GKS-100 214 106 A 0600 | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 5A; Ø: 1.06mm; GKS-100; steel; 0.6N; push-in |
| 0 | ||
| GKS-100 214 106 A 1000 | Ingun Prufmittelbau GmbH | Test probe: ICT/FCT; 5A; Ø: 1.06mm; GKS-100; steel; 1N; push-in; 20mΩ |
| 0 | ||
| DM100-0400-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 400mm; Y: 100mm |
| 0 | ||
| DM100-0500-14-100Z(H) | Degson Electronics Co Ltd | Enclosure base; UL94V-0; for DIN rail mounting; X: 500mm; Y: 100mm |
| 0 | ||
 Ameya Holding Limited | TPS7A14105PDRVR | Texas Instruments | RoHS : Compliant | 59,904 | ||
THVD1410DGK | Texas Instruments | RoHS : Compliant | 56,481 | |||
| TPS7A14105PYBKR | Texas Instruments | 41,029 | ||||
| THVD1410D | Texas Instruments | RoHS : Compliant | 13,470 | |||
 ComSIT USA | X1G005141000400 | Seiko Epson Corporation | AVAILABLE EU RoHS : Compliant | 1,322 | ||
| X1G005141000500 | Seiko Epson Corporation | AVAILABLE EU RoHS : Compliant | 1,175 | |||
| X1G005141000200 | Seiko Epson Corporation | AVAILABLE EU RoHS : Compliant | 1,484 | |||
ComSIT USA | S14100040 | Adolf Wuerth Gmbh & Co Kg | Electronic Component RoHS : Compliant | 5,460 | ||
| F339X141048MFP280 | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 3,500 | |||
| 1,14101E+12 | racon | Tactile Switches SPST-NO Off-Mom RoHS : Compliant | 2,605 | |||
| ROV14101KS | TE Connectivity | RADIAL-LEADED METAL OXIDE VARISTOR Varistor, 85V, 28J, Through Hole Mount RoHS : Compliant | 1,870 | |||
| 5033201410L | Sumida Corporation | Electronic Component RoHS : Compliant | 955 | |||
| FC1410TCBM001 | Lexar | Electronic Component RoHS : Not Compliant | 940 | |||
| 76314107 | Amphenol FCi | V.C.C. DOUBLE ROW. 100X.100 Board Connector, 14 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Locking, Blue Insulator, Plug RoHS : Not Compliant | 787 | |||
| TC514100ASJ80 | Toshiba America Electronic Components | 4M X 1 FAST PAGE DRAM Fast Page DRAM, 4MX1, 80ns, CMOS, PDSO20 RoHS : Not Compliant | 284 | |||
| SNMPO141008L1AMY00 | Wima | Electronic Component RoHS : Compliant | 255 | |||
| S14100039 | Adolf Wuerth Gmbh & Co Kg | WE-CMB COMMON MODE CHOKE Single Phase EMI Filter, 250V, 50HzHz RoHS : Compliant | 200 | |||
| DF1410P125H25 | Hirose Electric Co Ltd | RECT CONN Header Male Pin Surface Mount, Right Angle 10 POS 1.25mm Solder Tin RoHS : Compliant | 100 | |||
| PCI1410APGE | Texas Instruments | PC CARD CONTROLLER PCMCIA Bus Controller, CMOS, PQFP144 RoHS : Not Compliant | 76 | |||
| MC14106BCP | Motorola Semiconductor Products | HEX SCHMITT TRIGGER Inverter, 4000/14000/40000 Series, 6-Func, 1-Input, CMOS, PDIP14 RoHS : Not Compliant | 73 | |||
| ADUM1410ARWZ | Analog Devices Inc | QUAD-CHANNEL DIGITAL ISOLATOR Interface Circuit, CMOS, PDSO16 RoHS : Compliant | 34 | |||
| PXE1610CDNSM1410 | Infineon Technologies AG | Electronic Component RoHS : Not Compliant | 1 | |||
 GLYN GmbH & Co. KG | FID-1141-021-A15 | FUJITSU Component Ltd | 15" touch panel, 4-wire resistive, light touch, A | 2 | ||
 Interstate Connecting Components | 0305-0-15-15-47-14-10-0 | Mill-Max Mfg Corp | PIN RECEPTACLE 10Au RoHS : Compliant |
| 12,687 | |
| 216141-000 | TE Connectivity | 55A0111-18-90 RoHS : Compliant | 0 | |||
| 141-0701-301 | Cinch Connectivity Solutions | SMA JACK ASSEMBLY, RIGHT ANGLE MOUNT SMA STAINLESS |
| 0 | ||
| 1410201-2 | TE Connectivity | MULTIGIG RT T1 .8 BP FUL RoHS : Compliant |
| 0 | ||
| 095-725-114-100 | Amphenol RF | SMPM RIGHT ANGLE PLUG TO SMPM | 0 | |||
| 1-1410546-2 | TE Connectivity | MGIG HSG KEY/ESD .8 45 DEG RoHS : Compliant | 0 | |||
| 1-2314101-1 | TE Connectivity | M12 CRIMP CONTACT SOCKET 0.8 MM AWG22 RoHS : Compliant |
| 0 | ||
| 370AS001M1410D4 | Glenair Inc | ENVRIONMENTAL BACKSHELL STRAIGHT SPIN COUPLING | 0 | |||
| 380FS003M1410A3 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF RoHS : Compliant |
| 0 | ||
| 447DS615NF1410 | Glenair Inc | 0 | ||||
| 390DS002N1410H5 | Glenair Inc | 26482 sI EMI BS STR SZ14 CAD/eNi RoHS : Not Compliant |
| 0 | ||
| SE1410023111111 | Amphenol FCi | SE1410023111111-SLIMCOOLEDGE 0 | 0 | |||
| SEC141008-122 | ITT Interconnect Solutions | SEC141008-122 | 0 | |||
| SEC141026-104 | ITT Interconnect Solutions | SEC141026-104 | 0 | |||
| 01414108300 | ITT Interconnect Solutions | FRVE3057-16C | 0 | |||
 PEI Genesis | 114102G2 | Anderson Power Products |
| 0 | ||
| 06F2001S1410C3 | SOURIAU-SUNBANK |
| 0 | |||
| 262114-10 | Amphenol RF |
| 0 | |||
| M85049/114-10KN02-6 | Amphenol PCD |
| 0 | |||
| M85049/114-10KW03-6 | Amphenol PCD |
| 0 | |||
| M85049/114-10TN01-6D | Amphenol PCD |
| 0 | |||
| M85049/114-10TW02-6D | Amphenol PCD |
| 0 | |||
| M85049/114-10TZ01-6 | Amphenol PCD |
| 0 | |||
| 13294614/1-09-06 | SOURIAU-SUNBANK |
| 0 | |||
| S3565-141008L34 | SOURIAU-SUNBANK |
| 0 | |||
| S14-101-0042 | SOURIAU-SUNBANK |
| 0 | |||
| S14-101-0048 | SOURIAU-SUNBANK |
| 0 | |||
| S5091F1410-34 | SOURIAU-SUNBANK |
| 0 | |||
| S5203F1410S5S2-S | SOURIAU-SUNBANK |
| 0 | |||
| S694-614-100R | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | RS-5014-1000 | Heyco | RS 0500 OD x140 IDx1000 LG NAT |
| 9,900 | |
| 1-2314101-1 | TE Connectivity | Comm Circular Connect RoHS : Compliant |
| 4,913 | ||
| MTSW-114-10-S-D-620 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 352 | ||
| MA-141-004-213-A6300 | AirBorn a molex company | Micro-Strip Cable Connector RoHS : Compliant |
| 240 | ||
| 41.410 | Altech Corporation | KA46, Isolation Partion [5] |
| 228 | ||
| BU-3261410-2 | Mueller Electric Company | RETRACTABLE BANANA PLUG RED |
| 197 | ||
| TSW-141-07-G-D | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 160 | ||
| TSW-141-08-L-D-RA | Samtec Inc | PCB Header, 2.54mm Pitch, Through-Hole, RoHS : Compliant |
| 160 | ||
| MTSW-141-07-T-S-130-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 50 | ||
| M85049/114-10KN02-6 | Glenair Inc | ACCESSORIES - BACKSHELL RoHS : Compliant |
| 26 | ||
| M85049/114-10TN01-6D | Glenair Inc | ACCESSORIES - BACKSHELL |
| 26 | ||
| M85049/114-10TW02-6D | Glenair Inc | ACCESSORIES - BACKSHELL RoHS : Not Compliant |
| 24 | ||
| M85049/114-10KW03-6 | Glenair Inc | ACCESSORIES - BACKSHELL |
| 15 | ||
| M85049/114-10TZ01-6 | Glenair Inc | ACCESSORIES - SHRINK BOOT ADAPTERS |
| 13 | ||
| 1410201-2 | TE Connectivity | Backplane Connectors RoHS : Compliant |
| 8 | ||
 PUI | 1410-14 | 6,500 | ||||
| 141060 | 1,142 | |||||
| 141050 | 494 | |||||
| 141080 | 193 | |||||
| 141040 | 58 | |||||
| C1321.41.01 | 21 | |||||
| C1321.41.03 | 5 | |||||
 Richardson RFPD | 141-0701-301 | Cinch Connectivity Solutions | Conn SMA RCP 0Hz to 18GHz 50Ohm Solder RA Thru-Hol RoHS : Compliant |
| 0 | |
| 095-725-114-100 | Amphenol Corporation | Cable Assembly 0.085 Semi-Rigid Conformable 0.254m RoHS : Compliant |
| 0 | ||
| R141075000W | Radiall | Conn BNC PL 0Hz to 4GHz 50Ohm ST Cable Mount Gold RoHS : Compliant |
| 0 | ||
| 262114-10 | Amphenol Corporation | Conn MMCX 50Ohm Solder ST Thru-Hole PL Gold RoHS : Compliant |
| 0 | ||
| MAVR-001330-11410T | MACOM | Diode VAR Cap Single 12V 22pF 2-Pin SOD-323 T/R RoHS : Compliant | 0 | |||
| 141-0701-241 | Cinch Connectivity Solutions | 141-0701-241 RoHS : Compliant |
| 0 | ||
| R161410537 | Radiall | RF COAX PNL MT CONN | 0 | |||
| 1-8114-10QD | Winchester Interconnect | INTERCONNECT ACCESRY RoHS : Compliant | 0 | |||
| 141-0594-401 | Cinch Connectivity Solutions | Conn SMA 0Hz to 18GHz 50Ohm Solder ST Panel Mount RoHS : Compliant | 0 | |||
| LTC1410CG#PBF | Analog Devices Inc | 1-Channel Single ADC SAR 1.25Msps 12-bit Parallel RoHS : Compliant |
| 0 | ||
| PEAFS3-14-10M22G-292FF | Quantic PMI | LNA MODULE |
| 0 | ||
| DRF1410 | Microchip Technology Inc | Gate and Power Drivers Product RoHS : Compliant | 0 | |||
| R141013000 | Radiall | Conn BNC 0Hz to 4GHz 50Ohm ST Cable Mount PL Gold RoHS : Compliant |
| 0 | ||
| 141-0693-002 | Cinch Connectivity Solutions | Conn SMA PL 0Hz to 26.5GHz 50Ohm Solder ST Cable M RoHS : Compliant |
| 0 | ||
| TEP141006-10V | PolyPhaser | Weatherproof Outdoor Enclosure |
| 0 | ||
 Rutronik | X1A000141000500 | Seiko Epson Corporation | FC-135R 32,768kHz 12,5pF 10ppm RoHS : Compliant |
| 30,000 | |
| X1A000141000314 | Seiko Epson Corporation | FC-135R 32,768kHz 12,5pF 20ppm RoHS : Compliant |
| 20,000 | ||
| 299-83-314-10-001101 | PRECI-DIP SSA | 14P DIL SOCKET CLOSED R/A RoHS : Compliant |
| 10,837 | ||
| X1A000141000414 | Seiko Epson Corporation | FC-135R 32,768kHz 9pF 10ppm RoHS : Compliant |
| 5,000 | ||
| F339X141048MFP2B0 | Vishay Intertechnologies | FF 100nF 480Vac 20% X1 P15 MKP RoHS : Compliant |
| 1,500 | ||
| F339X141048MIP2T0 | Vishay Intertechnologies | FF 100nF 480Vac 20% X1 P22,5 MKP RoHS : Compliant |
| 300 | ||
| F339X141048MII2B0 | Vishay Intertechnologies | FF 100nF 480Vac 20% X1 P22,5MKP RoHS : Compliant |
| 250 | ||
 Chip 1 Exchange | 53426-1410 | Molex | INSTOCK RoHS : Compliant | 162,406 | ||
| 31410-1200 | Molex | INSTOCK RoHS : Compliant | 112,249 | |||
| 212514-1012 | Molex | INSTOCK RoHS : Compliant | 16,506 | |||
| 1-2314101-1 | TE Connectivity | INSTOCK RoHS : Compliant | 6,245 | |||
| 2EDGV-5.08-09P-14-100AH | Degson Electronics Co Ltd | INSTOCK | 5,445 | |||
| CF1/4-10K-5%-T&R | INSTOCK | 4,240 | ||||
| 2EDGKAM-5.08-04P-14-1000 | Degson Electronics Co Ltd | INSTOCK | 1,891 | |||
| 2EDGR-7.62-09P-14-100AH | Degson Electronics Co Ltd | INSTOCK | 1,836 | |||
| 2EDGRC-7.62-09P-14-100AH | Degson Electronics Co Ltd | INSTOCK | 1,566 | |||
| 2EDGKBM-5.08-08P-14-1000 | Degson Electronics Co Ltd | INSTOCK | 1,391 | |||
| 2EGTRC-7.5-08P-14-100AH | INSTOCK | 1,300 | ||||
| 31 214 106-001905 | INSTOCK | 243 | ||||
| 31214106-001906 | METZ CONNECT USA | INSTOCK | 233 | |||
| 88141-0814N | INSTOCK | 118 | ||||
| 31214103-003203 | METZ CONNECT USA | INSTOCK | 52 | |||
 Avnet Abacus | 530471410 | Molex | (Alt: 530471410) RoHS : Compliant | 53,000 | ||
| 1410946-1 | TE Connectivity | Connector Accessory VITA 4146 Screw MULTIGIG RT Guide Modules (Alt: 1410946-1) RoHS : Compliant | 28,800 | |||
| 54001410 | Aptiv PLC | DAY54001410 (Alt: 15470590) RoHS : Compliant | 24,000 | |||
| T4141012041-000 | TE Connectivity | (Alt: T4141012041-000) RoHS : Compliant | 11,756 | |||
| 1410142-1 | TE Connectivity | Connector MULTIGIG RT 144 Contacts 18 mm Receptacle Press Fit 16 Rows (Alt: 1410142-1) RoHS : Not Compliant | 4,752 | |||
| 299-87-314-10-001101 | PRECI-DIP SSA | Conn DIP Socket SKT 14 POS 254mm Solder RA ThruHole Box (Alt: 299-87-314-10-001101) RoHS : Compliant | 3,780 | |||
| T4141012041-000 | TE Connectivity | (Alt: T4141012041-000) RoHS : Compliant | 925 | |||
| 1731141010 | Molex | Connector DSubminiature Stacked Dual Port ReceptacleReceptacle 25 Position DB Shell Size 277mm S (Alt: 1731141010) RoHS : Compliant | 880 | |||
| 399-V3-114-10-009101 | PRECI-DIP SSA | (Alt: 399-V3-114-10-009101) RoHS : Compliant | 800 | |||
| 1410187-3 | TE Connectivity | Connector MULTIGIG RT 112 Contacts 18 mm Plug Press Fit 7 Rows (Alt: 1410187-3) RoHS : Not Compliant | 748 | |||
| 1410186-1 | TE Connectivity | (Alt: 1410186-1) RoHS : Not Compliant | 726 | |||
| 2132271410 | Molex | Connector PCB Receptacle Straight 14 Position 2 Row Solder Surface Mount (Alt: 2132271410) RoHS : Compliant | 450 | |||
| 1410189-3 | TE Connectivity | Connector MULTIGIG RT 8 Contacts 18 mm Plug Through Hole 7 Rows (Alt: 1410189-3) RoHS : Not Compliant | 90 | |||
| 1410478C | Murata Manufacturing Co Ltd | Inductor 1400 Series 100 H 78 A 78 A 004 ohm 10 (Alt: 1410478C) RoHS : Compliant | 60 | |||
1410656 | Phoenix Contact | (Alt: 1410656) RoHS : Compliant | 5 | |||
Avnet Asia | HS-31410-001 | Amphenol Corporation | ASSY,CBL,EXA,16X2.5BP,S1,C6600 (Alt: HS-31410-001) RoHS : Compliant |
| 1,700 | |
| ASP-214108-01 | Samtec Inc | 0.5MM Q PAIRS HIGHSPEED GROUND PLANE, RA (Alt: ASP-214108-01) RoHS : Compliant |
| 228 | ||
| 10127402-40H1410LF | Amphenol Corporation | (Alt: 10127402-40H1410LF) RoHS : Compliant | 0 | |||
| 10141022-200E001LF | Amphenol Corporation | (Alt: 10141022-200E001LF) RoHS : Compliant | 0 | |||
| G88MP141028CRVEU | Amphenol Corporation | AHLG88MP141028CRVEU CONN,HEADER,POWER,2X (Alt: G88MP141028CRVEU) RoHS : Compliant | 0 | |||
| G88MP141028DREU | Amphenol Corporation | (Alt: G88MP141028DREU) RoHS : Compliant | 0 | |||
| 10141042-629A000LF | Amphenol Corporation | (Alt: 10141042-629A000LF) RoHS : Compliant | 0 | |||
| 1410460C | Murata Manufacturing Co Ltd | Power Inductor, 100 uH, 6 A, 6 A, 33 Milliohm, ? 10% (Alt: 1410460C) RoHS : Compliant | 0 | |||
| 2511410-1 | TE Connectivity | CONN DIP HEADER 36P 6R MR(P2,H11.4) (Alt: 2511410-1) RoHS : Compliant | 0 | |||
| G88MP141028CREU | Amphenol Corporation | (Alt: G88MP141028CREU) RoHS : Compliant | 0 | |||
| 1731141010 | Molex | (Alt: 1731141010) RoHS : Compliant | 0 | |||
| 10141022-403E000LF | Amphenol Corporation | (Alt: 10141022-403E000LF) RoHS : Compliant | 0 | |||
| 10141042-200A003LF | Amphenol Corporation | (Alt: 10141042-200A003LF) RoHS : Compliant | 0 | |||
| 5054171410 | Molex | Mezzanine Connector, Plug, 14 Contacts, 2 Rows, 0.35mm, Gold, SMT, Straight, Copper Alloy, Solder (Alt: 5054171410) RoHS : Compliant | 0 | |||
| G88MP141022DR5EU | Amphenol Corporation | (Alt: G88MP141022DR5EU) RoHS : Compliant | 0 | |||
 Avnet Silica | MC14106BDR2G | onsemi | (Alt: MC14106BDR2G) RoHS : Compliant | 457,500 | ||
MC14106BDTR2G | onsemi | (Alt: MC14106BDTR2G) RoHS : Compliant | 200,000 | |||
| NLV14106BDR2G | onsemi | (Alt: NLV14106BDR2G) RoHS : Compliant | 52,500 | |||
| TJA1410BTK/0J | NXP Semiconductors | (Alt: TJA1410BTK/0J) RoHS : Compliant | 6,000 | |||
| TJA1410ATK/0J | NXP Semiconductors | (Alt: TJA1410ATK/0J) RoHS : Compliant | 6,000 | |||
| TJF1410ATK/0J | NXP Semiconductors | TJF1410ATK0 (Alt: TJF1410ATK/0J) RoHS : Compliant | 6,000 | |||
| TJA1410-EVB | NXP Semiconductors | TJA1410EVB (Alt: TJA1410-EVB) RoHS : Compliant | 1 | |||
| TC1410CPA | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side Inv 8Pin PDIP Tube (Alt: TC1410CPA) RoHS : Compliant | 0 | |||
| TC1410NCPA | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side NonInv 8Pin PDIP Tube (Alt: TC1410NCPA) RoHS : Compliant | 0 | |||
| HXT14100-DNU | Renesas Electronics Corporation | (Alt: HXT14100-DNU) RoHS : Compliant | 0 | |||
| TC1410COA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side Inv 8Pin SOIC N TR (Alt: TC1410COA713) RoHS : Compliant | 0 | |||
| TC1410EOA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side Inv 8Pin SOIC N TR (Alt: TC1410EOA713) RoHS : Compliant | 0 | |||
| TC1410NEOA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side NonInv 8Pin SOIC N TR (Alt: TC1410NEOA713) RoHS : Compliant | 0 | |||
| MQF21.4-10000/12 | Microchip Technology Inc | Monolithic Crystal Filter 214MHz 85C 3Pin (Alt: MQF21.4-10000/12) RoHS : Compliant | 0 | |||
| S4141001P1003 (ALS) | Sanmina Corporation | (Alt: S4141001P1003) RoHS : Not Compliant | 0 | |||
 Braemac Americas-Symmetry | ADFGP.50A.14.1000A | Taoglas Antenna Solutions | ADFGP.50A GNSS Patch Antenna End 1: 1.13 Micro Coax Black [1000mm] & SMA-RA PLUG GOLD (Male Pin) |
| 0 | |
| TP114105-2 | DB Unlimited | High Temp Piezo Transducer |
| 0 | ||
 Component Electronics, Inc | CF1/4-10K-5% | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 210,075 | |
| RC1/4-10R-5%-TR | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 5,185 | ||
| CF1/4105JT52 | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,995 | ||
| RMC1/4-1002FT | SEI Stackpole Electronics Inc | IN STOCK SHIP TODAY |
| 960 | ||
| DE1410E332M-KX | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 500 | ||
| 2322-195-14109 | Vishay BCcomponents | IN STOCK SHIP TODAY |
| 469 | ||
| DR331-4-104 | Datatronic Distribution Inc | IN STOCK SHIP TODAY RoHS : Compliant | 400 | |||
| 1820-1410 | RCA | IN STOCK SHIP TODAY | 100 | |||
| 31-141-0 | Mode Electronics | IN STOCK SHIP TODAY RoHS : Unknown |
| 28 | ||
| IBT1/4-103-J | TT Electronics Resistors | IN STOCK SHIP TODAY |
| 23 | ||
| 214-10/1-C | Hub City | IN STOCK SHIP TODAY |
| 9 | ||
| 8503-014-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 3 | ||
| ADUM1410ARWZ | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
| 4014-10-230610 | TE Connectivity | IN STOCK SHIP TODAY |
| 1 | ||
| 1410-NMP30-6.02 | KNF Group | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | RN1410 | The Ohio Nut And Bolt Co |
| 3 | ||
| 14-10-94-11 | Southco | Just a fraction of a turn on a hand-actuated knob style or a tool-actuated style is all it takes to engage or disengage firm compressive action that reduces panel vibration and noise. The pawl rides smoothly on a threaded screw mechanism to provide quick |
| 1 | ||
| 301410041556 | Essentra Components | 0 | ||||
| 14-10-91-11 | Southco | Just a fraction of a turn on a hand-actuated knob style or a tool-actuated style is all it takes to engage or disengage firm compressive action that reduces panel vibration and noise. The pawl rides smoothly on a threaded screw mechanism to provide quick | 0 | |||
| RS-5014-1000 | Heyco | RS 0500 OD X140 IDX1000 LG NAT | 0 | |||
| MM-03-131-14-10 | Southco | Rugged construction corrosion-resistant materials and attractive designs make these locks desirable for use in top-of-the-line marine environment applications. Various accessory handle anti-rattle handle self-adjusting door hook and top-stop door-hol | 0 | |||
| MM-03-533-14-10 | Southco | MM-03-533-14-10 | 0 | |||
| E3-14-10 | Southco | E3-14-10 | 0 | |||
| E3-1410-091 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1410-127 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| ME-01-410-50 | Southco | Simple styling and numerous installation options make these latches extremely practical for a wide variety of entry-door applications. A series of attractive design and finish options provide appropriate accents. | 0 | |||
| E3-1410-071 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| E3-1410-107 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| EM-10-21-410 | Southco | 0 | ||||
| MM-03-532-14-10 | Southco | 0 | ||||
 EBV Elektronik | ASSR-1410-503E | Broadcom Limited | (Alt: ASSR-1410-503E) RoHS : Compliant | 186,000 | ||
| MC14106BDR2G | onsemi | (Alt: MC14106BDR2G) RoHS : Compliant | 122,500 | |||
| 414-10UYD/S530-A3 | Everlight Electronics Co Ltd | LED UniColor Yellow 591nm 2Pin TR (Alt: 3604140003) RoHS : Compliant | 13,000 | |||
| ASSR-1410-003E | Broadcom Limited | (Alt: ASSR-1410-003E) RoHS : Compliant | 5,800 | |||
| MC14106BDG | onsemi | (Alt: MC14106BDG) RoHS : Compliant | 3,190 | |||
| TC1410EOA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side Inv 8Pin SOIC N TR (Alt: TC1410EOA713) RoHS : Compliant | 0 | |||
| TJA1410BTK/0J | NXP Semiconductors | (Alt: TJA1410BTK/0J) RoHS : Compliant | 0 | |||
| TC1410NEOA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side NonInv 8Pin SOIC N TR (Alt: TC1410NEOA713) RoHS : Compliant | 0 | |||
| TC1410NCOA713 | Microchip Technology Inc | MOSFET DRVR 05A 2OUT Lo Side NonInv 8Pin SOIC N TR (Alt: TC1410NCOA713) RoHS : Compliant | 0 | |||
| NLV14106BDTR2G | onsemi | (Alt: NLV14106BDTR2G) RoHS : Compliant | 0 | |||
| SGM61410QN6G/TR | SG Micro Corp | (Alt: SGM61410QN6G/TR) RoHS : Compliant | 0 | |||
| SGM61410XN6G/TR | SG Micro Corp | Conv DC to DC Single Step Down 5V to 45V 6Pin SOT23 TR (Alt: SGM61410XN6G/TR) RoHS : Compliant | 0 | |||
| MCP33141-05T-E/MS | Microchip Technology Inc | (Alt: MCP33141-05T-E/MS) RoHS : Compliant | 0 | |||
| SPMWH1410CD5WARMS4 | Samsung Electronics Co. Ltd | LEDMPL 4014LM401BCCT5000BINQuarterCRI80 (Alt: SPMWH1410CD5WARMS4) RoHS : Compliant | 0 | |||
| BX8071514100 S RMX1 | Intel Corporation | (Alt: 99CG5H) RoHS : Compliant | 0 | |||
 ECCO | M81969/14-10 | Step'n Components |
| 3,364 | ||
| M81969-14-10 | TE Connectivity / Deutsch |
| 1,000 | |||
| 0583141000 | ITT Interconnect Solutions |
| 196 | |||
 Flip Electronics | CY14101V-1XWI | Infineon Technologies AG | Stock | 2,987 | ||
 Maritex | MC14106BDR2G | onsemi | Other Logic ICs; MC14106BDR2G; ON SEMICONDUCTOR; 18 V; 14; 3 V; 250 ns RoHS : Compliant |
| 39,500 | |
| CQHA214-1070A001A1BB-23 | Greenconn Corp | IDC connector; pitch 2.54mm; 20-contacts; female; for ribbon cable AWG#26-#28 |
| 6,975 | ||
| CP-01410110 | Cvilux Corporation | Header for PCB; pitch 4.20mm; 10-contacts [2x5]; THT; male; side entry; 2 rows; 300V/9A RoHS : Compliant |
| 4,240 | ||
| 15EDGKA-3.81-05P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 3.81mm pitch; 5-ways; female; for wire 1.5mm2(28-16AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300/8A |
| 1,497 | ||
| 15EDGKA-3.5-06P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 3.50mm pitch; 6-ways; female; for wire 0.5-1.50mm2(28-16AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300/8A |
| 860 | ||
| 1410186-1 | TE Connectivity | Custom Backplane Connectors; 1410186-1; TE CONNECTIVITY; Vertical; 9; 72; Gold RoHS : Not Compliant |
| 197 | ||
| 2EDGVC-7.5-10P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 10-ways; male; vertical pin header; closed type; UL 300V/15A; TUV:320V/20A |
| 100 | ||
| DG2204R-5.0-07P-14-100ZH | Degson Electronics Co Ltd | PCB terminal block; pitch 5.00mm; 7-ways; range wire 4.0mm2 (AWG 24-12); spring-loaded; green; UL 300V/20A |
| 98 | ||
| 15EDGKN-3.81-05P-14-1000Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 3.81mm pitch; 5-ways; female; for wire 0.2-1.00mm2(28-16AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; spring clamp; UL 300V/8A |
| 97 | ||
| 2EDGR-7.5-08P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 8-ways; male; R/A pin header; open type; UL 300V/15A; TUV:400V/20A |
| 95 | ||
| 15EDGKN-3.81-04P-14-1000Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 3.81mm pitch; 4-ways; female; for wire 0.2-1.00mm2(28-16AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; spring clamp; UL 300V/8A |
| 94 | ||
| 2EDGV-7.5-04P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 4-ways; male; vertical pin header; open type; UL 300V/15A;TUV:400V/20A |
| 92 | ||
| 2EDGKF-5.08-10P-14-1000Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 5.08mm pitch; 10-ways; female; for wire 2.50mm2(28-12AWG); wire insertion direction same as plug-in direction; p.bronze contacts; brass cage; UL 300V/15A |
| 66 | ||
| 2EDGR-7.5-04P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; pitch 7.50mm; 4-ways; male; R/A pin header; open type; UL 300V/15A; TUV:400V/20A |
| 59 | ||
| 15EDGKB-3.5-06P-14-100Z(H) | Degson Electronics Co Ltd | Pluggable terminal block; 3.50mm pitch; 6-ways; female; for wire 0.5-1.50mm2(28-16AWG); wire insertion direction 90� to plug-in direction; p.bronze contacts; brass cage; UL 300/8A |
| 24 | ||
 Master Electronics | 1410 | Molex | RoHS : Compliant |
| 2,673 | |
| 1410-L210-L2F1-S02-4A | E-T-A | Circuit Breaker Thermal PCB Mount Push-To-Reset Reset Slide 1P Sldr 250VAC 4A RoHS : Compliant |
| 69 | ||
| 1410201-2 | TE Connectivity | MULTIGIG RT T1 .8 BP FULL LEF RoHS : Compliant |
| 12 | ||
| 216141-000 | TE Connectivity | 55A0111-18-90 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 15PCJ2N1410-K1330 | Thomas & Betts | 15KV POWER CABLE JOINT RoHS : Compliant |
| 0 | ||
| 121141-0032 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-16 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121141-0069 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-24 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121141-0113 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-19 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121141-0113-W | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-19 - Sockets - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 121141-0519 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-11 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing RoHS : Not Compliant |
| 0 | ||
| 1410191-4 | TE Connectivity | MULTIGIG RT T2 7RW DC SE RT MOQ Reduction RoHS : Compliant |
| 0 | ||
| 14102 | TE Connectivity | 4 POINT ELECTRONICS 24VDC RoHS : Compliant |
| 0 | ||
| 141023-0004 | ITT Interconnect Solutions | SEC6R19B32SA / 141023-0004 / Circular RoHS : Compliant |
| 0 | ||
| 141026-0001 | ITT Interconnect Solutions | SEC6R25W29PN / 141026-0001 / Circular RoHS : Compliant |
| 0 | ||
1410415 | Phoenix Contact | QUICKON cable connector - with a QUICKON nut - black - 4+PE-pos. - 2.5 mm² ... 6.0 mm²/690 V/40 A - for cable diameter of 9 mm ... 14 mm. RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W14614-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Fire Rated N Male to SMA Male Low Loss Cable 100 cm Length Using LMR-100-FR Coax., Radio frequency assembly fire rated N male to SMA male low loss cable 100 cm length using LMR-100-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable 100 cm length using LMR-100-FR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W14614-100CM can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W14614-100CM RF cable has a FRPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3W14614-100CM is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W14614-100CM can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 637 | |
| PE3C6214-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum N Female Bulkhead to SMA Male Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N female bulkhead to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N female bulkhead to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-LP SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-NF-BH-LP N type bulkhead cable connection on one end and TC-SPP250-SM-LP SMA cable connection on the other. Our low PIM TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-LP SMA cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-LP SMA cable is a female to male coax assembly, PE3C6214-100CM, can also be known as a low PIM TC-SPP250-NF-BH-LP type N jack to TC-SPP250-SM-LP SMA plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-NF-BH-LP N type jack to TC-SPP250-SM-LP SMA plug cable assembly PE3C6214-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-NF-BH-LP N cable assembly is manufactured with TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-LP SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-NF-BH-LP N type female bulkhead to TC-SPP250-SM-LP SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6214-100CM can also be used in the other direction and will be TC-SPP250-SM-LP SMA male to TC-SPP250-NF-BH-LP type N female bulkhead cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-NF-BH-LP N type jack bulkhead to TC-SPP250-SM-LP SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-NF-BH-LP type N to TC-SPP250-SM-LP SMA cable assembly for quick shipment worldwide. Variations of TC-SPP250-NF-BH-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N female bulkhead to SMA male low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 37 | ||
| PE3C3314-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male Right Angle to BNC Female Bulkhead Cable 100 CM Length Using RG400 Coax., Radio frequency assembly BNC male right angle to BNC female bulkhead cable 100 cm length using RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC female bulkhead cable 100 cm length using RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC bulkhead cable connection on the other. Our right angle BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE3C3314-100CM, can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE3C3314-100CM is built with RG400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC right angle male to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3314-100CM can also be used in the other direction and will be BNC female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC female bulkhead cable 100 cm length using RG400 coax. |
| 27 | ||
| PE3FCA314-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA314-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with LC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA314-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 23 | ||
| PE7714-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 67 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 1.85mm, Connector-In Gender: Male, Connector-Out Series: 1.85mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Aluminum Body Rated to 5 Watts DC to 67 GHz. PE7714-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7714-10 fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 1.85mm connectors is constructed with aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7714-10 attenuator is rated for maximum frequency up to 67 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7714-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE2CP1114-10 | Pasternack Enterprises | Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB N Coupler From 4 GHz to 18 GHz Rated to 50 Watts. RF coupler part number PE2CP1114-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with type N ports. Our directional coupler design uses type N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 4 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2CP1114-10 is constructed with a coupling value of 10 dB and a coupler directivity of 12 dB. This female type N directional coupler is built with a maximum insertion loss of 0.7 dB and a maximum input power of 50 watts. Our directional coupler design with N type connector is rated for a maximum insertion loss of 0.7 dB and a maximum VSWR of 1.5. Additional female type N coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1114-10 directional 10 dB type N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts. |
| 2 | ||
| PE3W14107 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to N Female Bulkhead Cable Using LMR-100A-UF Coax. PE3W14107 is a BNC male right angle to N female bulkhead cable using LMR-100A-UF coax. This Pasternack BNC male right angle to N female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. BNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14107 BNC male right angle to N female bulkhead cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W08014-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.4mm Male to 1.85mm Male Cable 100 cm Using PE-SR405FLJ Coax., Radio frequency assembly 2.4mm male to 1.85mm male cable 100 cm using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm male to 1.85mm male cable 100 cm using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 1.85mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 1.85mm cable connection on the other. Our 2.4mm to 1.85mm cable assemblies have a male gender on end 1 and male on end 2. This 2.4mm to 1.85mm cable is a male to male coax assembly, PE3W08014-100CM, can also be known as a 2.4mm plug to 1.85mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 1.85mm plug cable assembly PE3W08014-100CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable 2.4mm cable assembly is manufactured with 2.4mm to 1.85mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 20 GHz maximum frequency 2.4mm male to 1.85mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08014-100CM can also be used in the other direction and will be 1.85mm male to 2.4mm male cable assembly if the opposite connectivity is required. 2.4mm plug to 1.85mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 1.85mm male cable 100 cm using PE-SR405FLJ coax. |
| 0 | ||
| PE3W14109 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm Mini SMB Plug Cable Using 75 Ohm RG179 Coax. PE3W14109 is a N male to Mini SMB plug cable using RG179 coax. This Pasternack N male to Mini SMB plug cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm Mini SMB for connector 2. Our male N to plug Mini SMB cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W14109 N male to Mini SMB plug cable assembly is constructed with RG179 coax. | 0 | |||
| PE3C8314-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. 4.3-10 Male to N Male Right Angle Low PIM Cable 100 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male right angle low PIM cable 100 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a right angle type N cable connection on the other. Our low PIM 4.3-10 to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3C8314-100CM can also be known as a low PIM 4.3-10 plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.866-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8314-100CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our 4.3-10 male to right angle type N male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to type N plug cable assembly PE3C8314-100CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8314-100CM can also be used in the other direction and will be a right angle type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100014-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to TNC Male Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA male to TNC male low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C100014-100CM can also be known as a low loss space SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100014-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C100014-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100014-100CM can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements. |
| 0 | ||
| PE3W01114-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to MCX Jack Cable 100 CM Length Using RG316-DS Coax., Radio frequency assembly SMA male right angle to MCX jack cable 100 cm length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to MCX jack cable 100 cm length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and MCX cable connection on the other. Our right angle SMA to MCX cable assemblies have a male gender on end 1 and jack on end 2. This SMA to MCX cable is a male to jack coax assembly, PE3W01114-100CM, can also be known as a right angle SMA plug to MCX female cable assembly and will be shipped same-day as it is purchased. SMA plug to MCX female cable assembly PE3W01114-100CM is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to MCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01114-100CM can also be used in the other direction and will be MCX jack to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to MCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to MCX jack cable 100 cm length using RG316-DS coax. |
| 0 | ||
| PE3FCA514-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: APC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC APC, NK to FC UPC, NK, SM OS2, 2.0mm Plenum, Yellow-10M. Pasternack’s PE3FCA514-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long duplex cable assembly is equipped with FC/APC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA514-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA514-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/APC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 0 | ||
| PE3W03014-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male to SMB Jack Cable 100 cm Length Using RG316 Coax., Radio frequency assembly SMA male to SMB jack cable 100 cm length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB jack cable 100 cm length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. This SMA to SMB cable is a male to jack coax assembly, PE3W03014-100CM, can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3W03014-100CM is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03014-100CM can also be used in the other direction and will be SMB jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack cable 100 cm length using RG316 coax. |
| 0 | ||
| PE3W14102/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. Limited Detent SMP Male Bulkhead to 2.92mm Male Cable Using RG405 Coax with HeatShrink. PE3W14102/HS is a SMP male bulkhead to 2.92mm male cable using RG405 coax. This Pasternack SMP male bulkhead to 2.92mm male cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm 2.92mm for connector 2. Our male SMP bulkhead to male 2.92mm cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W14102/HS SMP male bulkhead to 2.92mm male cable assembly is constructed with RG405 coax. | 0 | |||
 Teledyne HiRel | 5962-9314101MXA | Teledyne HiRel | TRANSCEIVER, 9-BIT, WITH PARITY GENERATRO/CHECKER, 3-STATE OUTPUTS RoHS : Not Compliant | 0 | ||
| 5962-8751410YA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8751410XA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 120 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-9314101M3A | Teledyne HiRel | TRANSCEIVER, 9-BIT, WITH PARITY GENERATRO/CHECKER, 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
 Vyrian | R141075000W | Radiall | RF BNC Connector, Male, Cable Mount, Crimp Terminal, Plug RoHS : Compliant | 15,208 | ||
CY7C64714-100AXC | Cypress Semiconductor | Microcontroller, 8-Bit, 8051 CPU, 48MHz, CMOS, PQFP100 RoHS : Compliant | 13,508 | |||
| LTC1410CG-TRPBF | Analog Devices Inc | 8,499 | ||||
| MAX11410EVKIT | Analog Devices (Maxim Integrated) | 8,497 | ||||
| OCE14102-NM ETHERNET NETWORK ADAPTER | Broadcom Limited | 5,618 | ||||
| 1410724 | Phoenix Contact | Combination Line Connector, 2 Contact(s), Female, Socket RoHS : Compliant | 5,255 | |||
| 1410-9132 | Texas Instruments | 5,101 | ||||
| LTC1410CG#PBF | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDSO28 RoHS : Compliant | 5,041 | |||
| AMRT-1410-0000 | Broadcom Limited | 4,174 | ||||
| OCM14101B-NX-OCP | Broadcom Limited | 4,014 | ||||
| OCM14102B-UX-OCP | Broadcom Limited | 3,862 | ||||
| 3365/14-100SF | 3m Electronic Products Division | Cable Assembly, 7 Conductor(s), 28AWG, 300V, Flat Flexible Cable | 815 | |||
| 1410-P17-00-2.00 | 3m Electronic Products Division | Interconnection Device | 677 | |||
| 1410415 | Phoenix Contact | Circular Connector RoHS : Compliant | 428 | |||
| IBT1/4102JLF | Tt Electronics Plc | Fixed Resistor, Carbon Composition, 0.25W, 1000ohm, 250V, 5% +/-Tol, 625ppm/Cel, Through Hole Mount | 399 | |||
 Waytek, Inc. | 1410750BK0048 | ShawCor Ltd | DSG-Canusa CFW-750 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 2,495 | |
| MLF114-10L | NSPA | 16-14GA #10 Ring Terminal Blue Heat Shrink Solder Crimp |
| 2,089 | ||
| OS114-10 | NSPA | 16-14GA Ring #10 Connector Blue Stripe Clear Heat Shrink 31503 31703 31802 31903 |
| 1,264 | ||
| AL-14-100-SS-CT-C | Advanced Cable Ties Inc | ACT AL-14-100-SS-CT-C 316 coated stainless steel cable tie is a corrosion-resistant metal tie with 150 lb. tensile strength for securing wire bundles, hoses, and tubing in harsh environments. Its coated stainless construction supports durable fastening where heat, moisture, chemicals, or vibration are present. |
| 900 | ||
| 1410500BK0048 | ShawCor Ltd | DSG-Canusa CFW-500 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 314 | ||
| 141060 | OptiFuse | Panel Mount Circuit Breaker Automatic, 42VDC, 60A |
| 313 | ||
| 141050 | OptiFuse | Panel Mount Circuit Breaker Automatic, 42VDC, 50A |
| 200 | ||
| 1410500RD0048 | ShawCor Ltd | DSG-Canusa CFW-500 extra heavy-duty heat shrink tubing is red adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 169 | ||
| 141080 | OptiFuse | Panel Mount Circuit Breaker Automatic, 42VDC, 80A disc way, no repl |
| 98 | ||
| 14100702 | Sargent Quality Tools | Metri-Pack Crimping Tool DELPHI # 12085271 Formally MFG PN 3187CT |
| 65 | ||
| 14100706 | Sargent Quality Tools | Crimp Tool for Weather Pack Terminals 10-12 AWG (Formally 3302 WPCT) |
| 25 | ||
| 14100853 | Sargent Quality Tools | Crimp Tool Ratchet Assembly Delphi GM 08913440 Formally MFG PN 3182 LCT |
| 11 | ||
| 14100718 | Sargent Quality Tools | Color Key Power Lug Tool, 1,2,4,6 & 8 AWG (Formally 4295CT) |
| 3 | ||
| 14100686 | Sargent Quality Tools | Circular Pin & Socket Contact 20-12 AWG (Formally 2186CT) |
| 0 | ||
| 14100859 | Sargent Quality Tools | Crimp Tool 8 Ga - 2 Ga (Formally PN SP2747 / 6220 CT) |
| 0 | ||
 Wuhan P&S | MC14106BDTR2G | onsemi | Hex Schmitt Trigger RoHS : Compliant |
| 67,500 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand