| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
140/24-2SHT1-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() ECCO | 10-822814-000 | Amphenol Industrial Operations |
| 100 | ||
| 0110614000 | ITT Interconnect Solutions |
| 99 | |||
| M83723/95R1404N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 40 | ||
| AE83386R1404N-LC | Aero-Electric Connector Inc | 38 | ||||
| M83723/86R1404N-LC | Aero-Electric Connector Inc | 38 | ||||
| M83723/76R1407N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 19 | ||
| AE83376R1407N-01 | Aero-Electric Connector Inc | 19 | ||||
| AE83375R1407N | Aero-Electric Connector Inc | 19 | ||||
| AE83383W1407N | Aero-Electric Connector Inc | RoHS : Not Compliant | 6 | |||
| M83723/71W1407N | Aero-Electric Connector Inc | RoHS : Not Compliant | 5 | |||
| AE83372R1407N | Aero-Electric Connector Inc | 1 | ||||
| AE83371R1407N | Aero-Electric Connector Inc | 1 | ||||
| AE83371R1407N-01 | Aero-Electric Connector Inc | 1 | ||||
| AE83372R1407N-LC | Aero-Electric Connector Inc | 1 | ||||
| AE83372R1407N-01 | Aero-Electric Connector Inc | 1 | ||||
![]() Neutron USA | ATS014014016-PF-3O | Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, High Aspect Ratio Extrusion, Cross Cut, No TIM, 14x14x16mm RoHS : Compliant |
| 50 | |
| 1406140 | Phoenix Contact | Sensor Cables / Actuator Cables SAC-5P-MR/1.5-542/ FSSH SCO BK RoHS : Compliant |
| 50 | ||
| ATS014014006-PF-3E | Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, High Aspect Ratio Extrusion, Cross Cut, No TIM, 14x14x6mm RoHS : Compliant |
| 50 | ||
| 09030006140 | HARTING Technology Group | DIN 41612 Connectors MALE HI VOLTAGE CNT 2.8kV SOLDER RoHS : Compliant |
| 50 | ||
| 09140009965 | HARTING Technology Group | Heavy Duty Power Connectors HAN SC MOD FIXING SHEET RoHS : Compliant |
| 50 | ||
| 09140013104 | HARTING Technology Group | Heavy Duty Power Connectors Han 300Amp module Female Crimp RoHS : Compliant |
| 50 | ||
| 09140022753 | HARTING Technology Group | Heavy Duty Power Connectors MOD FOR FEMALE CON HAN AXIAL SCW MOD RoHS : Compliant |
| 50 | ||
1407646![]() | Phoenix Contact | Heavy Duty Power Connectors Bulkhead Housing B16 W/Single Latch RoHS : Compliant |
| 50 | ||
| 1241.6834.1114000 | Schurter Electronic Components | Pushbutton Switches MSM22 LA RI SF 12 A @250VAC 1P BL RoHS : Compliant |
| 29 | ||
| 09691400022 | HARTING Technology Group | D-Sub Mixed Contact Connectors COMBO PLUG FML 2W2C W/O CONTACTS |
| 19 | ||
| ECM140 COVER KIT | XP Power | Power Supply; COVER; ECM140 |
| 2 | ||
| 09140240319 | HARTING Technology Group | Heavy Duty Power Connectors Hinged Frame 24B a-f w/o fix. screws RoHS : Compliant |
| 0 | ||
| 1401110 | Phoenix Contact | Cordset, flush, Str M12 F 5p to 5 wire leads, 1m, TPE, M16 Mt, SACC-E-FS-5CON -M16/1,0 SCO RoHS : Compliant |
| 0 | ||
| 1404234 | Phoenix Contact | Heavy Duty Power Connectors HC-ADV-B16-HHWH- 1SGM40-PL RoHS : Compliant |
| 0 | ||
| 1407402 | Phoenix Contact | Ethernet Cable, CAT5, Str M12 M 4P to Str M12 F 4P, 2pair 5m, PUR Blue, NBC-MSD/ 5,0-93E/FSD SCO RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE7221-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 40 dB, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, SMA Female To SMA Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7221-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a female gender on side 1 and a SMA male connector on side 2. The Pasternack PE7221-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7221-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 18 | |
| PEW51CP001-40 | Pasternack Enterprises | Key Specifications, Waveguide Size : WR-51, Flange Size: None Flange, Flange Type : UG Square Flange, Flange Group : Standard, Minimum Frequency: 14.5 GHz, Maximum Frequency: 22 GHz, Impedance : 50 Ohms, Maximum VSWR: 1.25:1, Maximum Insertion Loss: 0.2 dB, Coupling: 40 dB. WR-51 Waveguide 40 dB Broadwall Coupler, UG Square Flange, 2.92mm Female Coupling Port, 14.5 GHz to 22 GHz, Brass., Pasternack’s PEW51CP001-40 is a WR-51 directional broadwall waveguide coupler with a 50 Ohm impedance. This directional waveguide coupler has a 2.92mm connector with a female gender configuration for the coupling port. Our waveguide coupler operates over a frequency range between 14.5 GHz and 22 GHz. This waveguide broadwall coupler has a coupling value of 40 dB. This 40 dB waveguide coupler has a brass copper body with passivated stainless steel plating. Our WR-51 directional waveguide coupler is rated for a maximum input power (CW) of 350 Watts. This 22 GHz waveguide coupler has a 1.1:1 maximum main line VSWR (voltage standing wave ratio). Additional dimensions and specifications for this 3-port WR-51 waveguide coupler are on our downloadable PDF datasheet above. The PEW51CP001-40 broadwall waveguide coupler from Pasternack is frequently used in situations where power measurements are necessary within a system for measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Our waveguide coupler has a maximum insertion loss of 0.2 dB. This waveguide coupler has a UG square flange, which is made up of brass copper material with a passivated stainless steel plating. The waveguide coupler with a UG square flange has a minimum coupler directivity of 25 dB. This WR-51 waveguide coupler is one of the thousands of products available from Pasternack’s in-stock inventory with same-business-day shipment for local, domestic, and international orders. Make your online purchase for our high-quality waveguide coupler and take advantage of the same business day shipping services. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal 3-port directional broadwall waveguide coupler for your requirement. |
| 2 | ||
| PE34140-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 6 inches. N Male to N Male Cable 6 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N male cable 6 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 6 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to N type cable is a male to male coax assembly, PE34140-6, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE34140-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 6 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34140-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N male cable 60 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 60 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE34140-60, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE34140-60 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3W06140/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to SMA Male Right Angle Cable Using RG316 Coax with HeatShrink. PE3W06140/HS is a FAKRA jack to SMA male right angle cable using RG316 coax. This Pasternack FAKRA jack to SMA male right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. FAKRA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06140/HS FAKRA jack to SMA male right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W08140 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male Right Angle to N Female Cable Using LMR-195 Coax. PE3W08140 is a reverse polarity TNC male right angle to N female cable using LMR-195 coax. This Pasternack reverse polarity TNC male right angle to N female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08140 TNC reverse polarity male right angle to N female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W11407 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm. 4.3-10 Female 4 Hole Flange to 4.3-10 Female 4 Hole Flange Cable Using 1/4 inch Superflexible Coax. PE3W11407 is a 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable using 1/4" Superflexible coax. This Pasternack 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm 4.3-10 for connector 2. Our female 4.3-10 4 hole flange to female 4.3-10 4 hole flange cable assembly uses a corrugated cable type that is 50 Ohm. Pasternack PE3W11407 4.3-10 female 4 hole flange to 4.3-10 female 4 hole flange cable assembly is constructed with 1/4" Superflexible coax. | 0 | |||
| PE3C1409-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 100 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 100 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male right angle to TNC male right angle low loss cable 100 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3C1409-100CM, can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1409-100CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1409-100CM can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 100 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE3C3140 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50. 2.92mm Female Bulkhead to SMP Female Cable Using PE-SR405FLJ Coax. PE3C3140 is a 2.92mm female bulkhead to SMP female cable using PE-SR405FLJ coax. This Pasternack 2.92mm female bulkhead to SMP female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm SMP for connector 2. Our female 2.92mm bulkhead to female SMP cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C3140 2.92mm female bulkhead to SMP female cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE3W01408/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Low Loss Cable 24 Inch Length Using PE-C200 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male low loss cable 24 inch length using PE-C200 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male low loss cable 24 inch length using PE-C200 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W01408/HS-24 can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. Our PE3W01408/HS-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. SMA plug to SMA plug cable assembly PE3W01408/HS-24 is built with PE-C200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01408/HS-24 can also be used in the other direction and will be a SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE34140LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Male to N Male Cable 60 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N male cable 60 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 60 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE34140LF-60, can also be known as a type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE34140LF-60 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 60 inch length using PE-SR405AL coax. |
| 0 | ||
| PE36140LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Cable 24 Inch Length Using PE-SR401FL Coax, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 24 inch length using PE-SR401FL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 24 inch length using PE-SR401FL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36140LF-24, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36140LF-24 is built with PE-SR401FL which is a formable coax type. The Pasternack formable 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 24 inch length using PE-SR401FL coax, RoHS. |
| 0 | ||
| PE3C11405 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Right Angle Bulkhead Cable Using LMR-100 Coax. PE3C11405 is a SMA male to SMA female right angle bulkhead cable using LMR-100A coax. This Pasternack SMA male to SMA female right angle bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to female SMA right anglebulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11405 SMA male to SMA female right angle bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C1402 | Pasternack Enterprises | 0 | ||||
| PE3W01406 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. TNC Male to BNC Male Cable Using PE-SR402FL Coax. PE3W01406 is a TNC male to BNC male cable using PE-SR402FL coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01406 TNC male to BNC male cable assembly is constructed with PE-SR402FL coax. | 0 | |||
![]() TE Connectivity | RT214012 | TE Connectivity | RT214012 Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 1 Form C SPDT-CO | Electromechanical Relay | Part Number: RT214012 | Internal Number: 5-1393239-4 | TE Connectivity RoHS : Compliant |
| 29,587 | |
| 2371404-5 | TE Connectivity | SGI 1.25 Plug HSG, 5P, Key A, Natural Number of Positions: 5 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 5 Plug Housing With | Part Number: 2371404-5 | Internal Number: 2371404-5 | TE Connectivity RoHS : Compliant |
| 11,556 | ||
| 1-2371404-1 | TE Connectivity | SGI 1.25 Plug HSG, 11P, Key A, Natural Number of Positions: 11 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 11 Plug Housing With | Part Number: 1-2371404-1 | Internal Number: 1-2371404-1 | TE Connectivity RoHS : Compliant |
| 11,515 | ||
| 1-2371404-6 | TE Connectivity | SGI 1.25 Plug HSG, 16P, Key A, Natural Number of Positions: 16 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 16 Plug Housing With | Part Number: 1-2371404-6 | Internal Number: 1-2371404-6 | TE Connectivity RoHS : Compliant |
| 7,884 | ||
| RTB14024F | TE Connectivity | RTB14024F Relay & Contactor Type: General Purpose Power Relay Current Type: DC Coil Magnetic System: Monostable Contact Arrangement: 1 Form C SPDT-CO Contact Current Rating: 12 A General Purpose Power Relay DC Monostable 1 Form C SPDT-CO | Electromechanical Relay | Part Number: RTB14024F | Internal Number: 2-1419108-6 | TE Connectivity RoHS : Compliant |
| 2,566 | ||
| 414002-1 | TE Connectivity | PLUG,CABLE,RTANG,SMB,AUPLTD RF Interface: SMB RF Connector Style: Plug RF Connector Mated Outer Diameter (Approximate): .187 in RF Connector Mated Outer Diameter (Approximate): 4.75 mm Impedance: 50 Ω SMB Plug .187" 4.75 mm | Coax Connector | Part Number: 414002-1 | Internal Number: 414002-1 | Alias Number: CH1096-000 | TE Connectivity RoHS : Compliant |
| 1,075 | ||
| 1410140-2 | TE Connectivity | MULTIGIG RT T2 .8 BP FULL CNT Number of Positions: 144 Row-to-Row Spacing: 1.8 mm Row-to-Row Spacing: .071 in Mating Alignment: With Mating Alignment Type: Polarization High Speed Backplane Connector | 144 1.8 mm .071" With | Part Number: 1410140-2 | Internal Number: 1410140-2 | TE Connectivity RoHS : Compliant |
| 299 | ||
| 211401-4 | TE Connectivity | RECEPT,SZ 13-7,CPC Number of Positions: 7 Connector Product Type: Housing Operating Voltage: 600 VDC Connector System: Wire-to-Wire Sealable: No Circular Power Connector | 7 Housing 600 VDC Wire-to-Wire | Part Number: 211401-4 | Internal Number: 211401-4 | TE Connectivity RoHS : Compliant |
| 254 | ||
| T4162214002-001 | TE Connectivity | RPC-M12-2MR-0.5SH-M12-2FR-PVC Cable Assembly Type: M12 to M12 Number of Positions: 2 Cable Assembly Length: .5 m Cable Assembly Length: 1.6 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 .5 m 1.6 ft | M12 A-Code Male To Female Double Ended Cable | Part Number: T4162214002-001 | Internal Number: T4162214002-001 | TE Connectivity RoHS : Compliant |
| 139 | ||
| NTFR-1-1/4-0-SP | TE Connectivity | NTFR-1-1/4-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .714 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-1-1/4-0-SP | Internal Number: 6229024003 | Alias Number: 5-1194923-1 | TE Connectivity RoHS : Compliant |
| 132 | ||
| RV8140-25-S03 | TE Connectivity | RV8140-25-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part Number: RV8140-25-S03 | Internal Number: 823189-SF | RV8140-25-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 25 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 25 A PCB Terminal PD2 | Part# RV8140-25-S03 RoHS : Compliant |
| 39 | ||
| RV8140-16-S03 | TE Connectivity | RV8140-16-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 16 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 16 A PCB Terminal PD2 | Part Number: RV8140-16-S03 | Internal Number: 823188-SF | RV8140-16-S03 Operating Voltage (Max): 530 VDC Current Rating (Max): 16 A Input Termination Type: PCB Terminal Pollution Degree: PD2 Output Termination Type: PCB Terminal Emc / Rfi Chokes Rv Series And Rv Series N: High-Performance Chokes For Demanding Application | 530 VDC 16 A PCB Terminal PD2 | Part# RV8140-16-S03 RoHS : Compliant |
| 38 | ||
| 1SNA115129R1400 | TE Connectivity | M16/12 Modular Terminal Block Product Type: Screw Clamp Terminal Block Block Function: Feed-Through Primary Product Color: Gray Product Spacing: .471 in Product Spacing: 12 mm Screw Clamp Terminal Block Feed-Through Gray .471" | Din Rail Terminal Blocks & Panel Mount Block | Part Number: 1SNA115129R1400 | Internal Number: 1SNA115129R1400 | TE Connectivity RoHS : Compliant |
| 12 | ||
| 9-966140-6 | TE Connectivity | MESSERLEISTE 21P PCB Mount Orientation: Horizontal Connector System: Wire-to-Board Number of Positions: 21 Number of Rows: 3 Centerline (Pitch): 3.5 mm Horizontal Wire-to-Board 21 3 | Amp Mcp Unsealed Header | Part Number: 9-966140-6 | Internal Number: 9-966140-6 | 3.5 mm | TE Connectivity RoHS : Compliant |
| 9 | ||
| T4162114003-005 | TE Connectivity | RPC-M12-3MS-5.0SH-M12-3FR-PVC Cable Assembly Type: M12 to M12 Number of Positions: 3 Cable Assembly Length: 5 m Cable Assembly Length: 16.4 ft M8/M12 Application Type: Sensor/Actuator M12 to M12 3 5 m 16.4 ft | M12 A-Code Male Straight To Female Double Ended Cable | Part Number: T4162114003-005 | Internal Number: T4162114003-005 | TE Connectivity RoHS : Compliant |
| 7 | ||
![]() Teledyne HiRel | M38510/01405BFA | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | 0 | ||
M38510/01402BEA![]() | Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8751408XA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8961408MYC![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 70 NS ACCESS TIME | 0 | |||
5962-8951401QA![]() | Teledyne HiRel | I/O CONTROLLER, PARALLEL, 6.17 MHZ RoHS : Not Compliant | 0 | |||
| 5962-8751409YA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8751409XA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 200 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-9231401Q3A![]() | Teledyne HiRel | TRANSCEIVER, 8-BIT LATCHED, WITH DUAL ENABLE AND 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| 5962-8751406YA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 350 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8751407XA | Teledyne HiRel | PROM, ELECTR. ERASABLE, 8K X 8, 300 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
5962-8961407MYC![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 90 NS ACCESS TIME | 0 | |||
5962-8961408MYA![]() | Teledyne HiRel | PROM, UV ERASABLE, 128K X 8, 70 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
M38510/01406BEA![]() | Teledyne HiRel | DATA SEL/MULTIPLEXER, 8-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761401DA | Teledyne HiRel | OR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/01405BEA | Teledyne HiRel | DATA SEL/MULTIPLEXER, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
![]() Vyrian | EFM32TG11B140F64GM32-BR | Silicon Laboratories Inc | RISC Microcontroller, 32-Bit, FLASH, Cortex-M0+ CPU, 48MHz, CMOS, PQCC32 RoHS : Compliant | 17,472 | ||
| LTC1409CSW-PBF | Analog Devices Inc | 12,255 | ||||
| MTLW-140-06-G-S-140 | Samtec Inc | Board Stacking Connector, 40 Contact(s), 1 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 11,318 | |||
| LTC1408CUH-12#TRPBF | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 6 Channel, Serial Access, PQCC32 RoHS : Compliant | 9,742 | |||
| 78511-404H | Amphenol Communications Solutions | Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle | 9,174 | |||
| LTC1408CUH-PBF | Analog Devices Inc | 8,837 | ||||
| LTC1407AIMSE#TRPBF | Analog Devices Inc | ADC, Proprietary Method, 14-Bit, 1 Func, 2 Channel, Serial Access, PDSO10 RoHS : Compliant | 7,657 | |||
| KTN140032 | Kingston Technology Company | 6,911 | ||||
| ECUO-T12-14-014-0-2-1-5-01 | Samtec Inc | Cable Assembly, 12 Conductor(s), Communication Cable RoHS : Compliant | 6,844 | |||
| LTC1400IS8#PBF | Analog Devices Inc | ADC, Successive Approximation, 12-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO8 RoHS : Compliant | 6,715 | |||
| LTC2140IUP-12#PBF | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 2 Channel, Parallel, Word Access, CMOS, PQCC64 RoHS : Compliant | 6,571 | |||
| LM4140ACM-2-0 | Texas Instruments | 6,560 | ||||
| LTC1408IUH-12#PBF | Analog Devices Inc | ADC, Proprietary Method, 12-Bit, 1 Func, 6 Channel, Serial Access, PQCC32 RoHS : Compliant | 4,994 | |||
LM4140CCMX-4.1/NOPB![]() | Texas Instruments | Three Terminal Voltage Reference, 1 Output, 4.096V, CMOS, PDSO8 RoHS : Compliant | 3,201 | |||
| L130-2280HE1400006 | Lumileds Holding B V | Single Color LED | 504 | |||
![]() Waytek, Inc. | AL-11-40-9-C | Advanced Cable Ties Inc | ACT AL-11-40-9-C intermediate cable tie is a natural nylon 6/6 tie with 40 lb. tensile strength, a one-piece self-locking design, and reliable performance from -40F to 185F. Packaged in bags of 100, it is built to bundle wire, cable, hoses, and tubing in general-purpose applications. |
| 41,800 | |
| A114017-SR | Amphenol Sine Systems | Amphenol Sine Systems A114017-SR blank sealing plug is a black size 16 thermoplastic cavity plug for AT SR01 Series connectors. It seals unused contact cavities to help maintain connector protection in AT strain-relief assemblies. |
| 14,750 | ||
| AL-11-40-9-D | Advanced Cable Ties Inc | ACT AL-11-40-9-D intermediate cable tie is a natural nylon 6/6 tie with 40 lb. tensile strength, a one-piece self-locking design, and reliable performance from -40F to 185F. Packaged in bulk, it is built to bundle wire, cable, hoses, and tubing in general-purpose applications. |
| 12,500 | ||
| 140685-91W | General Cable Technologies Corporation | 12GA TXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,000 | ||
| 19140-0091 | Molex | 16-14 GA #8 Spade Terminal Non-Insulated |
| 4,067 | ||
| 34900-6140 | Molex | MXP120 Sealed,6 Circuit, Black Female Receptacle, Key A Disc Way No Repl RoHS : Compliant |
| 1,531 | ||
| AKKL-3140A-RT | Essentra Components | Cable Clamp - Adhesive Mount, Adjustable - Max Compatible Cable Diameter - 10.3mm|.406in |
| 989 | ||
| AKKL-3140A-19 | Essentra Components | Cable Clamp - Adhesive Mount, Adjustable - Max Compatible Cable Diameter - 10.3mm|.406in |
| 980 | ||
| AKKL-3140-DHB | Essentra Components | Cable Clamp - Adhesive Mount, Adjustable - Max Compatible Cable Diameter - 10.3mm|.406in |
| 922 | ||
| 11-404E | Pollak | 4-Way Socket Trailer Connector DIE-CAST POLLAK E-LINE SEE ALSO PN 37644 |
| 640 | ||
| OS214-06 | NSPA | 16-14GA Spade #6 Connector Blue Stripe Clear Heat Shrink 31526 31125 32818 31924 |
| 595 | ||
| 11-402E | Pollak | 4-Way Plug Trailer Connector DIE-CAST ROUND POLLAK E-LINE SEE ALSO PN 37645 |
| 542 | ||
| 11-405 | Pollak | 4-Way Connector Assembly Plug and Socket 12-24V 20AMP Sold as sets only 18 GA Wire |
| 434 | ||
| AT114009 | Amphenol Sine Systems | Amphenol Sine Systems AT114009 contact removal tool is a white size 4 extraction tool for 6 Ga. contacts. Comparable to PN 114009, it supports DuraMate and AHDP service work where contacts must be removed cleanly from connector housings. |
| 128 | ||
| A114018 | Amphenol Sine Systems | Amphenol Sine Systems A114018 A-Series blank seal plug is a white size 8 thermoplastic sealing plug for AHDP, AHDM and ATHD connector cavities. It fits 10-8 gauge applications and seals unused positions to help maintain environmental protection in circular assemblies. |
| 58 | ||
![]() Win Source Electronics | LMR14050QDPRRQ1/LMR14050QDPRTQ1 | Texas Instruments |
| 53,100 | ||
NCP1406SNT1![]() | onsemi | IC REG BOOST ADJ 25MA 5TSOP RoHS : Not Compliant |
| 35,360 | ||
| B140HW-7 | Diodes Incorporated | DIODE SCHOTTKY 40V 1A SOD123 RoHS : Compliant |
| 31,220 | ||
BAS140WE6327![]() | Infineon Technologies AG | RoHS : Compliant |
| 30,000 | ||
ADUM1402BRWZ![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 20,000 | ||
| NCE0140K2 | Wuxi NCE Power Co Ltd | NCE N-Channel Enhancement Mode Power MOSFET |
| 15,130 | ||
ADUM1401BRWZ-RL![]() | Analog Devices Inc | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 13,570 | ||
| ADUM1401BRWZ ADUM1401BRWZ-RL | Analog Devices Inc |
| 13,430 | |||
| TSL1401CL | Amphenol Spectra-Strip | Linear Sensor Array 3V 8-Pin SMD T/R / 128 × 1 LINEAR SENSOR ARRAY WITH HOLD | IC LINEAR SENSOR ARRAY 128X1 CL |
| 10,000 | ||
| ADG1408YCPZ | Analog Devices Inc | ADI +/-15V 8:1 Mux with Ron max = 5 Ohm |
| 9,440 | ||
LMR14050SQDPRRQ1![]() | Texas Instruments | IC REG BUCK ADJUSTABLE 5A 10WSON RoHS : Compliant |
| 7,980 | ||
ADAU1401AWBSTZ-RL![]() | Analog Devices Inc | IC AUDIO PROC 28/56BIT 48LQFP / SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs RoHS : Compliant |
| 3,000 | ||
| GN1406-INE3 | Semtech Corporation | QFN-56 pin (260 /tray) RoHS : Compliant |
| 620 | ||
MC14051BDG![]() | onsemi | IC MUX/DEMUX 8X1 16SOIC RoHS : Compliant |
| 230 | ||
| LTC1403AIMSE-1 | Analog Devices Inc | IC ADC 14BIT 10-MSOP-EP RoHS : Not Compliant |
| 86 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |