| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
135LZ2012 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() TME | EP-SGL-PG135-LGR-B | TE Connectivity | Cable gland: cable; PG13,5; IP68; polyamide; light grey; Entrelec |
| 770 | |
| SFM-135-L2-STL-D-LC | Samtec Inc | Connector: PCB to PCB; female; data; PIN: 70; straight; on PCBs RoHS : Not Compliant |
| 230 | ||
| SON-N135LF | TT Electronics plc | Resistor network: Y |
| 200 | ||
| V-TEC PG13,5+LGR | OBO BETTERMANN GmbH & Co KG | Cable gland: cable; PG13,5; IP68; polyamide; light grey; V-TEC PG |
| 162 | ||
| 76314-135LF | Amphenol Corporation | PIN: 70; on PCBs; Plating: gold-plated |
| 28 | ||
| BCS-135-L-D-PE | Samtec Inc | Connector: pin strips; socket; female; data; PIN: 70; soldering,THT RoHS : Compliant |
| 12 | ||
| TWSC13-5L | Takachi Electronics Enclosure Co Ltd | Silicone protector; thermoplastic rubber; Colour: light grey |
| 9 | ||
DMN3135LVT-7![]() | Diodes Incorporated | Transistor: N-MOSFET; unipolar; 30V; 2.7A; Idm: 25A; 0.84W; TSOT26 RoHS : Compliant |
| 0 | ||
| GN315135L | Lovato Electric Inc | Switch: step cam switch; Stabl.pos: 3; 315A; 0-1-2; in housing |
| 0 | ||
| EP-SGL-PG135-LGR-A | TE Connectivity | Cable gland: cable; PG13,5; IP68; polyamide; light grey; Entrelec |
| 0 | ||
| LCSC135-L | Takachi Electronics Enclosure Co Ltd | Case ring; silicone; LC; Colour: light grey; 1pcs. |
| 0 | ||
| NSVMMUN2135LT1G | onsemi | Transistor: PNP; bipolar; BRT; 50V; 100mA; 400mW; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
| MMUN2135LT1G | onsemi | Transistor: PNP; bipolar; BRT; 50V; 0.1A; 0.246W; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
| GN200135L | Lovato Electric Inc | Switch: step cam switch; Stabl.pos: 3; 200A; 0-1-2; in housing |
| 0 | ||
| EP-ROP-PG135-LGR-A | TE Connectivity | Stopper; PG13,5; IP68; polyamide; light grey; Entrelec; Thread: PG |
| 0 | ||
![]() Avnet Americas | KW CVLDM1.TK-T313-5L16M1 | ams OSRAM Group | LED Chip White 1.3A 2-Pin Surface Mount T/R - Tape and Reel (Alt: Q65113A9593) RoHS : Compliant |
| 4,000 | |
| BLS9G3135LS-400U | Ampleon | - Trays (Alt: BLS9G3135LS-400U) RoHS : Compliant |
| 0 | ||
| SESDT-20-32-G-13.5-L1 | Samtec Inc | - Bulk (Alt: SESDT-20-32-G-13.5-L1) RoHS : Compliant |
| 0 | ||
| SFM-135-L2-L-D-A | Samtec Inc | - Rail/Tube (Alt: SFM-135-L2-L-D-A) RoHS : Compliant |
| 0 | ||
| ROLC-135-L2-S-Q-LC-K-TR | Samtec Inc | - Tape and Reel (Alt: ROLC-135-L2-S-Q-LC-K-TR) RoHS : Compliant |
| 0 | ||
| FOLC-135-L4-S-Q | Samtec Inc | - Rail/Tube (Alt: FOLC-135-L4-S-Q) RoHS : Compliant |
| 0 | ||
| 88960-135LF | Amphenol Corporation | - Rail/Tube (Alt: 88960-135LF) RoHS : Compliant |
| 0 | ||
| FOLC-135-L2-S-Q | Samtec Inc | - Rail/Tube (Alt: FOLC-135-L2-S-Q) RoHS : Compliant |
| 0 | ||
| BLS7G3135LS-200U | Flip Electronics | LDMOS POWER TRANSISTOR - Trays (Alt: BLS7G3135LS-200U) RoHS : Compliant |
| 0 | ||
| SFM-135-L1-SM-D | Samtec Inc | - Rail/Tube (Alt: SFM-135-L1-SM-D) RoHS : Compliant |
| 0 | ||
| SFM-135-L2-SM-D-A | Samtec Inc | - Rail/Tube (Alt: SFM-135-L2-SM-D-A) RoHS : Compliant |
| 0 | ||
| SFM-135-L2-S-D-A-K-TR | Samtec Inc | - Tape and Reel (Alt: SFM-135-L2-S-D-A-K-TR) RoHS : Compliant |
| 0 | ||
| SFM-135-L2-SM-D-LC-K | Samtec Inc | - Rail/Tube (Alt: SFM-135-L2-SM-D-LC-K) RoHS : Compliant |
| 0 | ||
| BLS7G3135L-350P,11 | Flip Electronics | LDMOS POWER TRANSISTOR - Trays (Alt: BLS7G3135L-350P,11) RoHS : Compliant |
| 0 | ||
| SFM-135-L2-S-D | Samtec Inc | PCB Receptacle, Board-to-Board, Wire-to-Board, 1.27 mm, 2 Rows, 70 Contacts, Surface Mount - Rail/Tube (Alt: SFM-135-L2-S-D) RoHS : Compliant |
| 0 | ||
![]() Newark | ZTP-135L | Amphenol Advanced Sensors | Thermopiles, Component, 8.22 Mm; Thermopile Type:Component; Thermopile Package:To-46; Thermistor Type:-; Filter Type:Flat Infrared; Sensor Diameter:8.22Mm; Sensor Wire Length:-; Product Range:Thermometrics Ztp Series; Qualification:-Rohs Compliant: No RoHS : Not Compliant |
| 964 | |
| BCS-135-L-D-PE | Samtec Inc | Socket, 2.54Mm, Pass-Thru, 2X35Way; |Samtec, Inc. BCS-135-L-D-PE RoHS : Compliant |
| 275 | ||
| BCS-135-L-S-TE | Samtec Inc | Socket, 2.54Mm, Vertical, 1X35Way; |Samtec, Inc. BCS-135-L-S-TE RoHS : Compliant |
| 275 | ||
| BCS-135-L-D-HE | Samtec Inc | Socket, 2.54Mm, Horizontal, 2X35Way; |Samtec, Inc. BCS-135-L-D-HE RoHS : Compliant |
| 275 | ||
| BCS-135-L-D-TE | Samtec Inc | Socket, 2.54Mm, Vertical, 2X35Way; |Samtec, Inc. BCS-135-L-D-TE RoHS : Compliant |
| 275 | ||
| BCS-135-L-D-PE-BE | Samtec Inc | Socket, 2.54Mm, Pass-Thru, 2X35Way; |Samtec, Inc. BCS-135-L-D-PE-BE RoHS : Compliant |
| 275 | ||
| SSM-135-L-SV | Samtec Inc | Socket, 2.54Mm, Smt, 1X35Way; |Samtec, Inc. SSM-135-L-SV RoHS : Compliant |
| 261 | ||
| SSM-135-L-DV | Samtec Inc | Receptacle, 2.54Mm, Vert, 70Way; |Samtec, Inc. SSM-135-L-DV RoHS : Compliant |
| 261 | ||
| SSM-135-L-DV-BE | Samtec Inc | Surface Mount Pcb Sock Strips,.100 Pitch; |Samtec, Inc. SSM-135-L-DV-BE RoHS : Compliant |
| 261 | ||
| BCS-135-L-S-PE | Samtec Inc | Socket, 2.54Mm, Pass-Thru, 1X35Way; |Samtec, Inc. BCS-135-L-S-PE RoHS : Compliant |
| 215 | ||
| SSM-135-L-DH | Samtec Inc | Receptacle, 2.54Mm, Horz, 70Way; |Samtec, Inc. SSM-135-L-DH RoHS : Compliant |
| 207 | ||
| SSM-135-L-DV-LC | Samtec Inc | Rcpt, Pcb, Brd-To-Brd, 2.54Mm, 2Rows; |Samtec, Inc. SSM-135-L-DV-LC RoHS : Compliant |
| 145 | ||
| SSM-135-L-DV-LC-K | Samtec Inc | Rcpt, Pcb, Brd-To-Brd, 2.54Mm, 2Rows; |Samtec, Inc. SSM-135-L-DV-LC-K RoHS : Compliant |
| 116 | ||
| SSM-135-LM-SV-LC-P | Samtec Inc | Rcpt, Pcb, Brd-To-Brd, 2.54Mm, 1Rows; |Samtec, Inc. SSM-135-LM-SV-LC-P RoHS : Compliant |
| 102 | ||
| DS1135LZ-20+ | Analog Devices Inc | Delay Line, 3, 3.6V, 20Ns, Nsoic-8; Available Until Stocks Are Exhausted |Analog Devices, Inc. DS1135LZ-20+ RoHS : Compliant |
| 19 | ||
![]() Analog Devices Inc | DS1135LU-10+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant | 36,000 | ||
| DS1135LZ-10+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 27,199 | ||
| DS1135LZ-15+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 13,578 | ||
| DS1135LZ-20+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 12,907 | ||
| DS1135LU-15+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant | 12,000 | |||
| DS1135LZ-30+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 11,533 | ||
| DS1135LZ-10+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 5,000 | ||
| DS1135LU-10+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant | 1,297 | |||
| DS1135LU-15+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant | 1,114 | |||
| DS1135LZ-25+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 40 | ||
| DS1135LZ-12+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 6 | ||
| DS1135LZ-20+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 0 | ||
| DS1135LZ-15+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 0 | ||
| DS1135LZ-30+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 0 | ||
| DS1135LZ-25+T&R | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silic RoHS : Compliant |
| 0 | ||
![]() RS | 120254-0135 (LHR-M18PA-PMS-101) | Woodhead Molex | PHOTOELECTRIC SENSOR W/BACKGROUND SUPP, CYLINDER, M18, M12, CONTRINEX SERIES |
| 10 | |
| LTILA51-6S-WH-GN-NBL/12V (RLL-48311135|LTILA51-6S-WH-GN-NBL/12V|LTILA516SWHGNNBL | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 5 | ||
| WL-L135LHB2-850-D | Wamco Inc | LINEAR 2' HIGH BAY LED, 120V-277VAC, 135W, DIMMABLE |
| 3 | ||
| 135L075G | B&B Electronics Manufacturing Company | TIMING BELT, 0.750" BELT WIDTH, 36 TEETH, 13.5" PITCH LENGTH, SINGLE SIDED |
| 2 | ||
| SY113-5LZ-M3 | SMC Corporation of America | SOLENOID VALVE, 3 PORT, DIRECT, AIR, 0 TO 0.7 MPA, 24 VDC, SY100 SERIES |
| 2 | ||
| SY113-5LOZD-M3 | SMC Corporation of America | VALVE, SOL, BODY PORT, 24VDC |
| 1 | ||
| MCG-13.5L | Mencom Corporation | CABLE GLAND, PG13.5, METAL GLAND, LONG 0.236 - 0.472 |
| 0 | ||
| 88951135LF | Amphenol FCi | 88951-135LF-METRAL HDR 4RX1M STB |
| 0 | ||
| FSD-313.5-L | Bimba Manufacturing Company | CYLINDER, SQUARE FLAT-1 SERIES |
| 0 | ||
| CKZ5N63-135LT | SMC Corporation of America | POWER CLAMP CYLINDER, NAAMS, CKZ5 SERIES |
| 0 | ||
| CKZ2N63-135LT | SMC Corporation of America | CYLINDER, NAAMS, POWER CLAMP, 63MM BORE, 135 DEG, LEFT SIDE, PNP SWITCH, NPT PT |
| 0 | ||
| CKZ2N50-135LP | SMC Corporation of America | CLAMP CYLINDER, SLIM LINE, CKZ1N SERIES |
| 0 | ||
| 1864370 (SPTAF 1/11-3,5-LL) | Phoenix Contact | PCB TERMINAL PUSH-IN 3.5MM 18AWG 160V 13.5A 11 POSITION COMBICON CONTROL SERIES |
| 0 | ||
| LT-1544-401-125 (GLT-00044135 | LT-1544-401-125 | LT1544401125) | Carling Technologies | SWITCH;TOGGLE;ILLUMINATED ACTUATOR ;LT SERIES |
| 0 | ||
| NUT R135 LOCK ZINC .0002- (380-08762-001|NUT R135 LOCK ZINC .0002-|NUT R135 | Carling Technologies | HARDWARE, NUT R135, LOCK, ZINC .0002 |
| 0 | ||
![]() Bisco Industries | BSTC-210-D-105-04-G-135-LF | Major League Electronics | 450 | |||
| 2-135 LM100-70 | O-RINGS | 269 | ||||
| MS3213-5L | MS MACHINE SCREWS | 25 | ||||
| U-SFPQSA0.25-P0.135-L0.35- | Misumi Group Inc | 5 | ||||
![]() Rochester Electronics | MC10135L![]() | onsemi | Flip Flop Positive Edge 1 Element 5V 16-DIP Tube RoHS : Not Compliant |
| 129 | |
| DS1135LZ-20+ | Analog Devices Inc | Delay Line IC Multiple, NonProgrammable 20ns 8-SOIC Tube RoHS : Compliant |
| 9,956 | ||
| DS1135LZ-15+TR | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silicon Delay L |
| 10,000 | ||
| BLS7G3135L-350P,11 | Ampleon | RF MOSFET LDMOS 65V 3.5GHz 200mA RoHS : Compliant |
| 46 | ||
| MRF9135LR5 | Freescale Semiconductor | RF MOSFET T/R RoHS : Compliant |
| 20 | ||
| ISPLSI-2032VL-135LJ44 | Lattice Semiconductor Corporation | ispLSI2032 - In-System Programmable High Density PLD |
| 171 | ||
ISPLSI2032-135LJ![]() | Lattice Semiconductor Corporation | EE PLD, 10ns, 32-Cell, CMOS, PQCC44 RoHS : Not Compliant |
| 51,330 | ||
ISPLSI2128VL-135LT100![]() | Lattice Semiconductor Corporation | EE PLD, 10ns, 128-Cell, CMOS, PQFP100 RoHS : Not Compliant |
| 516 | ||
ISPLSI2128VL-135LT176![]() | Lattice Semiconductor Corporation | EE PLD, 10ns, 128-Cell, CMOS, PQFP176 RoHS : Not Compliant |
| 1,063 | ||
ISPLSI2192VL-135LT128![]() | Lattice Semiconductor Corporation | EE PLD, 10ns, 192-Cell, CMOS, PQFP128 RoHS : Not Compliant |
| 671 | ||
| DS1135LU-15+TR | Maxim Integrated Products | Delay Line IC Multiple, NonProgrammable 15ns 8-SOP T/R RoHS : Compliant |
| 8,650 | ||
DS1135LU-30![]() | Maxim Integrated Products | Silicon Delay Line, 3-Func, 1-Tap, True Output, PDSO8 RoHS : Not Compliant |
| 5,010 | ||
| DS1135LU-30+T | Maxim Integrated Products | Delay Line, 3-Func, 1-Tap, PDSO8 RoHS : Compliant |
| 3,000 | ||
DS1135LZ-20/T&R![]() | Maxim Integrated Products | Delay Line IC Multiple, NonProgrammable 20ns 8-SOIC T/R RoHS : Not Compliant |
| 5,000 | ||
DS1135LZ-30![]() | Maxim Integrated Products | 3-Volt 3-in-1 High-Speed Silicon Delay Line RoHS : Not Compliant |
| 5,007 | ||
![]() Sager | BCS-135-L-D-DE-010 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| BCS-135-L-D-DE-047 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-HE-041 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-PE-025 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-PE-070 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-TE-021 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-TE-058 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-S-PE-026 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-S-TE-022 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SESDT-20-32-G-13.5-L1 | Samtec Inc | 0.80 MM DOUBLE ROW TIGER EYE�Ѣ DISCRETE WIRE CABLE ASSEMBLY, TEFLON�Ѣ FLUOROPOLYMER WIRE, SOCKET RoHS : Compliant |
| 0 | ||
| ROLC-135-L2-S-Q-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 6127V0A135L.5LT | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| 6127V3A135L.5ST | TT electronics / BI Technologies | Industrial Motion & Position Sensors |
| 0 | ||
| BCS-135-L-D-DE-016 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-135-L-D-DE-061 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | DS1135LZ-20+ | Analog Devices Inc | 3-Volt 3-in-1 High-Speed Silicon Delay Line RoHS : Compliant | 21 | ||
![]() ComSIT USA | BSP135L6327 | Infineon Technologies AG | SIPMOS SMALL-SIGNAL-TRANSISTOR Power Field-Effect Transistor, 0.12A I(D), 600V, 45ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 2,685 | ||
| ISPLSI2064E135LT100 | Lattice Semiconductor Corporation | IN-SYSTEM PROGRAMMABLE SUPERFAST HIGH DENSITY PLD EE PLD, 10ns, 64-Cell, CMOS, PQFP100 RoHS : Not Compliant | 56 | |||
| ISPLSI2032E135LT44 | Lattice Semiconductor Corporation | IN-SYSTEM PROGRAMMABLE SUPERFAST HIGH DENSITY PLD EE PLD, 10ns, 32-Cell, CMOS, PQFP44 RoHS : Not Compliant | 36 | |||
| ISPLSI2096VE135LT128 | Lattice Semiconductor Corporation | 3.3V IN-SYSTEM PROGRAMMABLE SUPERFAST HIGH DENSITY PLD EE PLD, 10ns, 96-Cell, CMOS, PQFP128 RoHS : Not Compliant | 3 | |||
![]() Interstate Connecting Components | 88960-135LF | Amphenol FCi | 88960-135LF-METRAL PWR HD METRAL RoHS : Compliant |
| 0 | |
| 89006-1135LF | Amphenol FCi | 89006-1135LF-METRAL HDR PF 5R1 RoHS : Compliant | 0 | |||
| JB36N14B19SNH135L | SOURIAU-SUNBANK | J5803 | 0 | |||
| 65801-135LF | Amphenol FCi | CLINCHER RECEPT ASSY, GOLD RoHS : Compliant |
| 0 | ||
| 59112-T38-25-135LF | Amphenol FCi | MTK RR STR HDR-59112-T38-25-13 | 0 | |||
| 447HS109NF1713-5L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 74789-135LF | Amphenol FCi | 74789-135LF-METRAL HDR 4RX3M S RoHS : Compliant | 0 | |||
| 85854-1135LF | Amphenol FCi | 85854-1135LF-METRAL HDR 5RX4M RoHS : Compliant | 0 | |||
| 88952-135LF | Amphenol FCi | WIDE BODY HDR RoHS : Compliant |
| 0 | ||
| 64992-S13-5LF | Amphenol FCi | BERGCON HEADER PCN09035-64992- RoHS : Compliant | 0 | |||
| 88923-135LF | Amphenol FCi | HDR STR SIG 4RX4M PF RoHS : Compliant |
| 0 | ||
| 88951-135LF | Amphenol FCi | 88951-135LF-METRAL HDR 4RX1M S RoHS : Compliant | 0 | |||
| 447HS473NF13-5LP | Glenair Inc | 0 | ||||
| 76314-135LF | Amphenol FCi | MINI PV RCP DR TMT VERT-76314- RoHS : Compliant | 0 | |||
![]() PEI Genesis | 88-569781-35L | Amphenol Corporation |
| 0 | ||
| 1019291-35L4 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | BCS-135-L-D-PE-BE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 182 | |
| BCS-135-L-D-PE | Samtec Inc | .100 2.54 mm Tiger Claw Pass-through Skt RoHS : Compliant |
| 182 | ||
| BCS-135-L-S-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 182 | ||
| BCS-135-L-D-HE | Samtec Inc | .100 2.54 mm Tiger Claw Pass-through Skt RoHS : Compliant |
| 182 | ||
| BCS-135-L-D-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 182 | ||
| SSM-135-L-DV-BE | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 172 | ||
| SSM-135-L-SV | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 172 | ||
| SSM-135-L-DV | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 172 | ||
| SFM-135-L2-STL-D-LC | Samtec Inc | SOCKET STRIP 1.27MM 35POS 2ROW RoHS : Not Compliant |
| 152 | ||
| BCS-135-L-S-PE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 142 | ||
| SSM-135-L-DH | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 137 | ||
| SSM-135-L-DV-LC | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 96 | ||
| SSM-135-L-DV-LC-K | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 77 | ||
| SSM-135-LM-SV-LC-P | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 67 | ||
| SFM-135-L1-S-D-LC | Samtec Inc | SOCKET STRIP 1.27MM 35POS 1ROW RoHS : Compliant |
| 12 | ||
![]() Rutronik | S-LMUN2135LT1G | LRC Leshan Radio Co Ltd | DIGI-TRANS. 2,2K/47K SOT23 RoHS : Compliant |
| 30,000 | |
| LMUN2135LT1G | LRC Leshan Radio Co Ltd | DIGI-TRANS.1,54K/2,86K SOT23 RoHS : Compliant |
| 15,000 | ||
![]() Chip 1 Exchange | L-7104QBC-C-11.35L/F-01 | INSTOCK | 43,610 | |||
| L-7104SRC-J-11.35L/F-01 | INSTOCK | 265 | ||||
| ISPLSI2064VE-135LB100 | INSTOCK | 184 | ||||
| MC10135L | INSTOCK | 95 | ||||
| ISPLSI2064VE135LB100 | Lattice Semiconductor Corporation | INSTOCK | 75 | |||
| ISPLS12064VE135L100 | Lattice Semiconductor Corporation | INSTOCK | 12 | |||
| ISPLS12064VE135L100 | Lattice Semiconductor Corporation | INSTOCK | 12 | |||
![]() Avnet Abacus | ZTP-135L | Amphenol Corporation | IR Sensor Analog 1CH 86 4Pin TO5 (Alt: ZTP-135L) RoHS : Compliant | 0 | ||
| 88960-135LF | Amphenol Corporation | (Alt: 88960-135LF) RoHS : Compliant | 0 | |||
| 88952-135LF | Amphenol Corporation | Conn Hard Metric HDR 48 POS 2mm Solder ST ThruHole Tube (Alt: 88952-135LF) RoHS : Compliant | 0 | |||
| 88923-135LF | Amphenol Corporation | Conn Hard Metric HDR 96 POS 2mm Press Fit ST ThruHole Tube (Alt: 88923-135LF) RoHS : Compliant | 0 | |||
| 77311-101-35LF | Amphenol Corporation | Conn Unshrouded Header HDR 35 POS 254mm Solder ST ThruHole Bag (Alt: 77311-101-35LF) RoHS : Compliant | 0 | |||
| BCS-135-L-D-TE | Samtec Inc | (Alt: BCS-135-L-D-TE) RoHS : Compliant | 0 | |||
| SSM-135-L-DV-LC | Samtec Inc | PCB Receptacle BoardtoBoard 254 mm 2 Rows 70 Contacts Surface Mount SSM Series (Alt: SSM-135-L-DV-LC) RoHS : Compliant | 0 | |||
| SFM-135-L2-L-D-A | Samtec Inc | Conn Socket Strip SKT 70 POS 127mm Solder ST SMD (Alt: SFM-135-L2-L-D-A) RoHS : Compliant | 0 | |||
| SFM-135-L1-S-D-A | Samtec Inc | PCB Receptacle BoardtoBoard WiretoBoard 127 mm 2 Rows 70 Contacts Through Hole Mount (Alt: SFM-135-L1-S-D-A) RoHS : Compliant | 0 | |||
| SFM-135-L2-S-D-A | Samtec Inc | PCB Receptacle BoardtoBoard WiretoBoard 127 mm 2 Rows 70 Contacts Surface Mount (Alt: SFM-135-L2-S-D-A) RoHS : Compliant | 0 | |||
| BCS-135-L-D-PE-BE | Samtec Inc | PCB Receptacle BoardtoBoard 254 mm 2 Rows 70 Contacts Through Hole Mount BCS Series (Alt: BCS-135-L-D-PE-BE) RoHS : Compliant | 0 | |||
| PT0805FR-070R135L | YAGEO Corporation | SMD Current Sense Resistor 0135 ohm PT Series 0805 2012 Metric 125 mW 1 Thick Film - Tape and Reel (Alt: PT0805FR-070R135L) RoHS : Compliant | 0 | |||
| 59112-T38-25-135LF | Amphenol Corporation | (Alt: 59112-T38-25-135LF) RoHS : Compliant | 0 | |||
| FOLC-135-L2-S-Q-LC | Samtec Inc | Conn Socket Strip SKT 140 POS 064mm Solder ST SMD Tube (Alt: FOLC-135-L2-S-Q-LC) RoHS : Compliant | 0 | |||
| FOLC-135-L2-S-Q-LC-P-TR | Samtec Inc | Conn Socket Strip SKT 140 POS 064mm Solder ST SMD TR (Alt: FOLC-135-L2-S-Q-LC-P-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 2SC6135,LF(T | Toshiba America Electronic Components | Transistor GP BJT NPN 80V 1A 3-Pin UFM (Alt: 2SC6135,LF(T) RoHS : Compliant | 0 | ||
| 10174690-1SF135LF | Amphenol Corporation | FCI10174690-1SF135LF BK220 IO (Alt: 10174690-1SF135LF) RoHS : Compliant | 0 | |||
| 88954-135LF | Amphenol Corporation | (Alt: 88954-135LF) RoHS : Compliant | 0 | |||
| 51952-135LF | Amphenol Corporation | (Alt: 51952-135LF) RoHS : Compliant | 0 | |||
| 65801-135LF | Amphenol Corporation | (Alt: 65801-135LF) RoHS : Compliant | 0 | |||
DMN3135LVT-7![]() | Diodes Incorporated | (Alt: DMN3135LVT-7) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | MMUN2135LT1G | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2135LT1G) RoHS : Compliant | 6,000 | ||
DMN3135LVT-7![]() | Diodes Incorporated | (Alt: DMN3135LVT-7) RoHS : Compliant | 0 | |||
| NSVMMUN2135LT1G | onsemi | PNP Bipolar Digital Transistor BRT PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: NSVMMUN2135LT1G) RoHS : Compliant | 0 | |||
| L135-L567003500000 | Lumileds | (Alt: L135-L567003500000) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | PLTSB135LT | Allegro MicroSystems LLC | IN STOCK SHIP TODAY | 12,600 | ||
ISPLSI2032A-135LT44![]() | Lattice Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 130 | ||
ISPLSI2064VE-135LT100![]() | Lattice Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 49 | ||
ISPLSI2032-135LJ![]() | Lattice Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 36 | ||
| SI9135LG | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 26 | ||
ISPLSI2096VE-135LT128![]() | Lattice Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
| MC10135L | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant | 5 | |||
| ISP2032-135LT48 | Lattice Semiconductor Corporation | IN STOCK SHIP TODAY | 1 | |||
![]() EBV Elektronik | KWCVLDM1.TK-T313-5L16M1-0-1A-S | ams OSRAM Group | (Alt: Q65113A9593) RoHS : Compliant | 4,000 | ||
| MMUN2135LT1G | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2135LT1G) RoHS : Compliant | 0 | |||
| NSVMMUN2135LT1G | onsemi | PNP Bipolar Digital Transistor BRT PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: NSVMMUN2135LT1G) RoHS : Compliant | 0 | |||
| BSP135L6433HTMA1 | Infineon Technologies AG | MOSFET NCH 600V 120MA SOT223 (Alt: SP000432430) RoHS : Compliant | 0 | |||
![]() Flip Electronics | BLS7G3135LS-200U | Flip Electronics Manufacturing Services | Stock, Ship Today | 54 | ||
![]() Maritex | LL01CR-AU85135L (XPE) ROHS | LedLink Optics | Lens for LED high power; angle: oval 85 x 135 degrees ; Number of LEDs: 1; Dimensions: 18x10.14mm; Height: 6mm; material: PC; Fastening: glue |
| 52 | |
![]() Master Electronics | BCS-135-L-D-DE-010 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | |
| BCS-135-L-D-DE-047 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-D-HE-041 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-D-PE-025 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-D-PE-070 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-D-TE-021 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-D-TE-058 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-S-PE-026 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-135-L-S-TE-022 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| SESDT-20-32-G-13.5-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFMC-135-L1-F-D-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MRTD-02-20-L-13.5-L1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ROLC-135-L2-S-Q-TR | Samtec Inc | .050 FOURRAY™ Quad Row Socket Strip RoHS : Compliant |
| 0 | ||
| SSM-135-L-DV-M | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SSM-135-LM-DV-BE-P | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | WL-L135LHB2-850-D | Wamco Inc | Wamco Inc. WL-L135LHB2-850-D Linear 2' High Bay LED, 120V-277VAC, 135W, Dimmable |
| 3 | |
![]() Pasternack Enterprises US | PE3C1135LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Low Loss Cable Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to TNC male low loss cable using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C1135LF/HS can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1135LF/HS RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1135LF/HS is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 6,813 | ||
| PE36135LF | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75. 75 Ohm F Male to 75 Ohm F Male Cable Using 75 Ohm RG11 Coax, RoHS. PE36135LF is a F type male to F type male cable using RG11 coax. This Pasternack F type male to F type male cable assembly uses a 75 Ohm type F for connector 1 and a 75 Ohm type F for connector 2. Our male type F to male type F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36135LF F type male to F type male cable assembly is constructed with RG11 coax and the maximum VSWR is 1.4:1. | 1,939 | |||
| PE3C1135LF/HS-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. TNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to TNC male low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 12 inch length using LMR-240-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C1135LF/HS-12 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1135LF/HS-12 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C1135LF/HS-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 1,775 | ||
| PE36135LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm F Male to 75 Ohm F Male Cable 24 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 24 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 24 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our type F to F type cable assemblies have a male gender on end 1 and male on end 2. This type F to F type cable is a male to male coax assembly, PE36135LF-24, can also be known as a type F plug to F type plug cable assembly and will be shipped same-day as it is purchased. Type F plug to type F plug cable assembly PE36135LF-24 is built with RG11 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency F type male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality F type to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 24 inch length using 75 Ohm RG11 coax, RoHS. |
| 413 | ||
| PE36135LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm F Male to 75 Ohm F Male Cable 12 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to type F cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with F type cable connection on one end and F type cable connection on the other. Our type F to type F cable assemblies have a male gender on end 1 and male on end 2. This type F to type F cable is a male to male coax assembly, PE36135LF-12, can also be known as a F type plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE36135LF-12 is built with RG11 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 12 inch length using 75 Ohm RG11 coax, RoHS. |
| 413 | ||
| PE36135LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm F Male to 75 Ohm F Male Cable 36 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 36 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 36 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and F type cable connection on the other. Our type F to type F cable assemblies have a male gender on end 1 and male on end 2. This F type to type F cable is a male to male coax assembly, PE36135LF-36, can also be known as a type F plug to type F plug cable assembly and will be shipped same-day as it is purchased. F type plug to type F plug cable assembly PE36135LF-36 is built with RG11 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency F type male to type F male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality F type to type F cable assembly for quick shipment worldwide. Variations of F type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 36 inch length using 75 Ohm RG11 coax, RoHS. |
| 391 | ||
| PE36135LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm F Male to 75 Ohm F Male Cable 48 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our type F to F type cable assemblies have a male gender on end 1 and male on end 2. This type F to type F cable is a male to male coax assembly, PE36135LF-48, can also be known as a F type plug to type F plug cable assembly and will be shipped same-day as it is purchased. Type F plug to F type plug cable assembly PE36135LF-48 is built with RG11 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to type F cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency F type male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. F type plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type F to F type cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 48 inch length using 75 Ohm RG11 coax, RoHS. |
| 293 | ||
| PE36135LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm F Male to 75 Ohm F Male Cable 60 Inch Length Using 75 Ohm RG11 Coax, RoHS., Radio frequency assembly 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG11 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG11 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type F to F type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type F cable connection on one end and type F cable connection on the other. Our type F to F type cable assemblies have a male gender on end 1 and male on end 2. This type F to type F cable is a male to male coax assembly, PE36135LF-60, can also be known as a F type plug to type F plug cable assembly and will be shipped same-day as it is purchased. F type plug to type F plug cable assembly PE36135LF-60 is built with RG11 which is a flexible coax type. The Pasternack flexible F cable assembly is manufactured with type F to F type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type F male to F type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type F plug to type F plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality F type to type F cable assembly for quick shipment worldwide. Variations of type F cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm F male to 75 Ohm F male cable 60 inch length using 75 Ohm RG11 coax, RoHS. |
| 234 | ||
| PE34135LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 72 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 72 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 72 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 72 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34135LF-72, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34135LF-72 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34135LF-72 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 72 inch length using 75 Ohm RG179 coax, RoHS. |
| 0 | ||
| PE34135LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 12 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 12 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34135LF-12, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34135LF-12 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34135LF-12 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 12 inch length using 75 Ohm RG179 coax, RoHS. |
| 0 | ||
| PE3W18135LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to N Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder. PE3W18135LF/HS is a TNC male right angle to N male cable using LMR-400-UF coax. This Pasternack TNC male right angle to N male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm N for connector 2. TNC right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18135LF/HS TNC male right angle to N male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE34135LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 60 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 60 Inch Length Using 75 Ohm RG179 Coax, RoHS., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 60 inch length using 75 Ohm RG179 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 60 inch length using 75 Ohm RG179 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE34135LF-60, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE34135LF-60 is built with RG179 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34135LF-60 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 60 inch length using 75 Ohm RG179 coax, RoHS. |
| 0 | ||
| PE35135LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. N Male to MCX Plug Cable Using RG178 Coax with HeatShrink, LF Solder. PE35135LF/HS is a N male to MCX plug cable using RG178 coax. This Pasternack N male to MCX plug cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm MCX for connector 2. Our male N to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35135LF/HS N male to MCX plug cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W03135LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. SMA Male to BNC Male Right Angle Cable Using RG8 Coax, LF Solder, RoHS. PE3W03135LF is a SMA male to BNC male right angle cable using RG8 coax. This Pasternack SMA male to BNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03135LF SMA male to BNC male right angle cable assembly is constructed with RG8 coax. | 0 | |||
| PE3C1135LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm. TNC Male to TNC Male Cable Using LMR-240-UF Coax, RoHS. PE3C1135LF is a TNC male to TNC male cable using LMR-240-UF coax. This Pasternack TNC male to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1135LF TNC male to TNC male cable assembly is constructed with LMR-240-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
![]() Vyrian | MC10135L![]() | onsemi | Jbar-Kbar Flip-Flop, 10K Series, 1-Func, Positive Edge Triggered, 2-Bit, Complementary Output, ECL, CDIP16 RoHS : Not Compliant | 930 | ||
M27C1001-35L3TR![]() | STMicroelectronics | RoHS : Not Compliant | 710 | |||
M27C4001-35L6TR![]() | STMicroelectronics | RoHS : Not Compliant | 610 | |||
| MRF9135LSR5 | NXP Semiconductors | 570 | ||||
| M27C1001-35L6XTR | STMicroelectronics | RoHS : Not Compliant | 540 | |||
M27C4001-35L1TR![]() | STMicroelectronics | RoHS : Not Compliant | 460 | |||
M27C1001-35L1![]() | STMicroelectronics | RoHS : Compliant | 410 | |||
M27C1001-35L6![]() | STMicroelectronics | RoHS : Compliant | 360 | |||
M27C4001-35L6X![]() | STMicroelectronics | RoHS : Not Compliant | 340 | |||
| DS1135LZ-12+ | Analog Devices Inc | Silicon Delay Line, 3-Func, 1-Tap, True Output, PDSO8 RoHS : Compliant | 330 | |||
| DS1135LZ-20/T&R | Analog Devices Inc | 320 | ||||
| DS1135LU-10+T&R | Analog Devices Inc | Silicon Delay Line, 3-Func, 1-Tap, True Output, PDSO8 RoHS : Compliant | 300 | |||
M27C4001-35L1![]() | STMicroelectronics | RoHS : Not Compliant | 270 | |||
| DS1135LZ-20+ | Analog Devices Inc | Silicon Delay Line, 3-Func, 1-Tap, True Output, PDSO8 RoHS : Compliant | 240 | |||
| DS1135LU-12+T&R | Analog Devices Inc | Silicon Delay Line, 3-Func, 1-Tap, True Output, PDSO8 RoHS : Compliant | 190 | |||
![]() Win Source Electronics | DMN3135LVT-7![]() | Diodes Incorporated | MOSFET 2N-CH 30V 3.5A TSOT26 RoHS : Compliant |
| 12,140 | |
DS1135LZ-10+![]() | Maxim Integrated Products | IC DELAY LINE 10NS 8SOIC RoHS : Compliant |
| 5,000 | ||
ISPLSI2064VE-135LT100![]() | Lattice Semiconductor Corporation | 3.3V In-System Programmable High Density SuperFAST? PLD RoHS : Not Compliant |
| 1,136 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |