| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
131L-S08-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | NSVMMUN2131LT1G | onsemi | PNP Bipolar Digital Transistor (BRT). ONSSPCTRNSTME1D1N; - Tape and Reel (Alt: NSVMMUN2131LT1G) RoHS : Compliant |
| 0 | |
| NSVMMUN2131LT1G | onsemi | PNP Bipolar Digital Transistor (BRT). ONSSPCTRNSTME1D1N; - Tape and Reel (Alt: NSVMMUN2131LT1G) RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-PE | Samtec Inc | - Rail/Tube (Alt: BCS-131-L-D-PE) RoHS : Compliant |
| 0 | ||
| 10136647-052131LF | Amphenol Corporation | - Trays (Alt: 10136647-052131LF) RoHS : Not Compliant |
| 0 | ||
| CY9AF131LAPMC1-G-UNE2 | Infineon Technologies AG | ARM MCU, 32-bit, ARM Cortex-M3, 20 MHz, 64 KB, 8 KB, 64 Pins, LQFP - Trays (Alt: CY9AF131LAPMC1-G-UNE2) RoHS : Compliant | 0 | |||
| ARC6-24-13.1-LU-LD-2-1 | Samtec Inc | - Bulk (Alt: ARC6-24-13.1-LU-LD-2-1) RoHS : Compliant |
| 0 | ||
| 89007-1131LF | Amphenol Corporation | - Rail/Tube (Alt: 89007-1131LF) RoHS : Compliant |
| 0 | ||
| 10174856-131LF | Amphenol Corporation | - Tape and Reel (Alt: 10174856-131LF) RoHS : Not Compliant |
| 0 | ||
| SFMC-131-L3-L-D | Samtec Inc | - Bulk (Alt: SFMC-131-L3-L-D) RoHS : Compliant | 0 | |||
| PLT0805Z1131LSTP | Vishay Intertechnologies | SMD Chip Resistor, 1.13 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Custom Tape W/Leader (Alt: PLT0805Z1131LSTP) RoHS : Compliant |
| 0 | ||
| 91931-31131LF | Amphenol Corporation | Mezzanine Connector, Conan, Receptacle, 1 mm, 2 Rows, 31 Contacts, Surface Mount, Beryllium Copper - Tape and Reel (Alt: 91931-31131LF) RoHS : Compliant |
| 0 | ||
| 88924-131LF | Amphenol Corporation | - Rail/Tube (Alt: 88924-131LF) RoHS : Compliant |
| 0 | ||
| 4310R-104-820/131L | Bourns Inc | Res Thick Film NET 82 Ohm/130 Ohm 2 Ohm/2% 1.25W ?100ppm/?C TERM Molded 10-Pin SIP Pin Thru-Hole - Rail/Tube (Alt: 4310R-104-820/131L) RoHS : Not Compliant |
| 0 | ||
| PLT0805Z1131LBWI | Vishay Intertechnologies | SMD Chip Resistor, 1.13 kohm, ? 0.01%, 250 mW, 0805 [2012 Metric], Thin Film, Precision, PLT Series - Waffle Pack (Alt: PLT0805Z1131LBWI) RoHS : Not Compliant |
| 0 | ||
| 4310R-102-131LF | Bourns Inc | - Rail/Tube (Alt: 4310R-102-131LF) RoHS : Compliant |
| 0 | ||
![]() Newark | MMUN2131LT1G![]() | onsemi | TRANSISTOR, AEC-Q101, PNP, 50V, SOT-23; RoHS : Compliant |
| 6,416 | |
MMUN2131LT1G![]() | onsemi | TRANSISTOR, AEC-Q101, PNP, 50V, SOT-23; RoHS : Compliant |
| 6,416 | ||
| 75869-131LF | Amphenol Communications Solutions | Wire-To-Board Connector, Quickie Series,; RoHS : Compliant |
| 5,768 | ||
| 10180999-211131LF | Amphenol Communications Solutions | MEZZANINE CONN, R/A RCPT, 31P, 1R, 1MM; RoHS : Compliant |
| 2,250 | ||
| BCS-131-L-D-PE | Samtec Inc | SOCKET, 2.54MM, PASS-THRU, 2X31WAY; RoHS : Compliant |
| 280 | ||
| BCS-131-L-D-HE | Samtec Inc | SOCKET, 2.54MM, HORIZONTAL, 2X31WAY; RoHS : Compliant |
| 277 | ||
| BCS-131-L-S-TE | Samtec Inc | SOCKET, 2.54MM, VERTICAL, 1X31WAY; RoHS : Compliant |
| 277 | ||
| BCS-131-L-D-TE | Samtec Inc | SOCKET, 2.54MM, VERTICAL, 2X31WAY; RoHS : Compliant |
| 277 | ||
| SSM-131-L-SV | Samtec Inc | RCPT, PCB, BRD-TO-BRD, 2.54MM, 1ROWS; RoHS : Compliant |
| 263 | ||
| SSM-131-L-DV | Samtec Inc | SOCKET, 2.54MM, SMT, 2X31WAY; RoHS : Compliant |
| 263 | ||
| SSM-131-LM-DV-BE | Samtec Inc | SURFACE MOUNT PCB SOCK STRIPS,.100 PITCH; RoHS : Compliant |
| 263 | ||
| BCS-131-L-S-PE | Samtec Inc | SOCKET, 2.54MM, PASS-THRU, 1X31WAY; RoHS : Compliant |
| 216 | ||
| SSM-131-L-DV-LC | Samtec Inc | RCPT, PCB, BRD-TO-BRD, 2.54MM, 2ROWS; RoHS : Compliant |
| 145 | ||
| EV1HMC1131LC4 | Analog Devices Inc | EVAL BRD, 24 TO 35GHZ, POWER AMPLIFIER; RoHS : Compliant |
| 3 | ||
| MCS 103 131 LSSC | Sifam Tinsley Precision Instrumentation Ltd | ANALOG PANEL METER, AC CURRENT; RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | EV1HMC1131LC4 | Analog Devices Inc | EVALUATION PCB ASSEMBLY RoHS : Compliant |
| 33 | |
![]() RS | 75869-131LF | Amphenol FCi | CONN RECT HEADER 6CNTS THRUMOUNT QUICKIE 2.54MMPIN-SPNG VERT DBLROW RoHS : Compliant |
| 229 | |
| CP1-31L-10 | ABB Low Voltage Products and Systems | ILLUMINATED PUSHBUTTON#CP1-31L-10 |
| 15 | ||
| MP1-31L | ABB Low Voltage Products and Systems | MODULAR SERIES BLUE PUSH BUTTON HEAD MOMENTARY 22MM CUTOUT |
| 7 | ||
| PK 103 131 LSLS | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-5A, SELF-CONTAINED |
| 5 | ||
| PK 103 131 LSNT | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-50A, TRANSFORMER-RATED |
| 5 | ||
| PK 103 131 LSPK | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-100A, TRANSFORMER-RATED |
| 5 | ||
| PK 103 131 LSPZ | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-150A, TRANSFORMER-RATED |
| 5 | ||
| PK 103 131 LSRX | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-300A, TRANSFORMER-RATED |
| 4 | ||
| PK 103 131 LSSC | Sifam Tinsley Precision Instrumentation Ltd | MCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-400A, TRANSFORMER-RATED |
| 3 | ||
| TMCS 103 131 LSNL | Sifam Tinsley Precision Instrumentation Ltd | TMCS ANALOG SWITCHBOARD PANEL METER, AC AMMETER, 0-30A, TRANSFORMER-RATED |
| 1 | ||
| 103131LSPK | Yokogawa Electric Corporation | AC AMMETER, AB-40 METAL CASE, TRANSFORMER RTD, 40/70HZ, 5A RATING, 0-100A SCALE |
| 0 | ||
| 7731580131LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| MCS103131LSSF | RAM Meter Inc | AC AMMETER, 0-500 AC AMPS TRANSFORMER RATED |
| 0 | ||
| 101594101131LF | Amphenol FCi | Minitek PWR, 3.0mm Single Row, Vertical SMT Header, 11 Positions, 30 " Gold pl |
| 0 | ||
| 10138400111131LF | Amphenol FCi | RIGHT ANGLE CONAN PLUG-10138400-111131LF |
| 0 | ||
![]() Microchip Technology Inc | 75001-113-1-LPN | Microchip Technology Inc | 2010A MASER, W/AUTOTUNER, HI VOLTAGE PWR, 100 MHZ OUT, Projected EOL: 2028-04-30 - Contact for Pricing RoHS : Not Compliant | 0 | ||
![]() Bisco Industries | MS3213-1L | ZaGO Manufacturing | 1 | |||
![]() Rochester Electronics | MMUN2131LT1G![]() | onsemi | PNP Bipolar Digital Transistor (BRT) RoHS : Compliant |
| 786,650 | |
MC10H131L![]() | onsemi | MC10H131L - DUAL D TYPE MASTER-SLAVE FLIP-FLOP RoHS : Not Compliant |
| 1 | ||
| CY9AF131LAPMC1-G-UNE2 | Infineon Technologies AG | RISC Microcontroller, 32-Bit, FLASH, 20MHz, CMOS, PQFP64 RoHS : Compliant |
| 2,679 | ||
| HMC1131LC4 | Analog Devices Inc | RF Amplifier 24GHz 35GHz 24dBm 24-LCC Cut Tape RoHS : Compliant |
| 3 | ||
| A9131LLHLT-T | Allegro MicroSystems LLC | A9131LLHLT-T | 2,725 | |||
RP131L471D-TR![]() | Ricoh Electronic Devices Co Ltd | Fixed Positive LDO Regulator, 4.7V, 0.65V Dropout, PDSO6 RoHS : Compliant |
| 15,000 | ||
![]() Sager | BCS-131-L-D-DE-009 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | ||
| BCS-131-L-D-DE-054 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-HE-005 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-HE-050 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-PE-034 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-PE-BE | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-TE-030 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-S-HE-006 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-DE-055 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-HE-006 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-HE-051 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-PE-035 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-D-TE-031 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-S-HE-007 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| BCS-131-L-S-TE-030 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
![]() Coilcraft Direct | CMT2-13-1L | Coilcraft Inc | Common mode choke, toroid, RoHS RoHS : Compliant |
| 26 | |
![]() TME | 10162583-411131LF | Amphenol Corporation | Connector: PCB to PCB; plug; male; PIN: 31; angled; 1A; 100V; on PCBs |
| 1,500 | |
| 91901-31131LF | Amphenol Corporation | Contact; gold-plated; 1A; PIN: 31; 500V; vertical; H: 4.15mm |
| 1,000 | ||
| 91900-21131LF | Amphenol Corporation | Contact; gold-plated; 1A; PIN: 31; 500V; straight; H: 4.15mm |
| 471 | ||
MMUN2131LT1G![]() | onsemi | Transistor: PNP; bipolar; BRT; 50V; 0.1A; 0.246W; SOT23,TO236AB RoHS : Compliant |
| 117 | ||
| NSVMMUN2131LT1G | onsemi | Transistor: PNP; bipolar; BRT; 50V; 100mA; 400mW; SOT23,TO236AB RoHS : Compliant |
| 0 | ||
| SDD112131L | Schneider Electric | Momentary switch; Poles: 1; 250VAC; IP20; beige; monostable; Sedna |
| 0 | ||
| SDD114131L | Schneider Electric | Momentary switch; Poles: 1; 250VAC; IP20; anthracite; monostable |
| 0 | ||
| 131L-1-A-5/1D | Pickering Electronics | Relay: reed switch; Ucoil: 5VDC; SPST-NO; 1.25A; max.1kVDC; 10W |
| 0 | ||
| 131L-1-A-12/1DR | Pickering Electronics | Relay: reed switch; Ucoil: 12VDC; SPST-NO; 1.25A; max.1kVDC; 10W |
| 0 | ||
| 131L-1-A-3/1DR | Pickering Electronics | Relay: reed switch; Ucoil: 3VDC; SPST-NO; 1.25A; max.1kVDC; 10W |
| 0 | ||
| SDD111131L | Schneider Electric | Momentary switch; Poles: 1; 250VAC; IP20; white; monostable; Sedna |
| 0 | ||
| 131L-1-A-3/1D | Pickering Electronics | Relay: reed switch; Ucoil: 3VDC; SPST-NO; 1.25A; max.1kVDC; 10W |
| 0 | ||
| SDD113131L | Schneider Electric | Momentary switch; Poles: 1; 250VAC; IP20; aluminium; monostable |
| 0 | ||
| ARC6-16-13.1-LU-LU-3-1 | Samtec Inc | Cable; PIN: 50; 332.74mm; PVC; blue; gold-plated; 34AWG; 100Ω; 13.1" RoHS : Compliant |
| 0 | ||
| 131L-1-A-12/1D | Pickering Electronics | Relay: reed switch; Ucoil: 12VDC; SPST-NO; 1.25A; max.1kVDC; 10W |
| 0 | ||
![]() Interstate Connecting Components | 10136647-052131LF | Amphenol FCi | 10136647-052131LF-MINITEK PWR4 RoHS : Unknown | 0 | ||
| 89007-1131LF | Amphenol FCi | 89007-1131LF-METRAL SIG PF HDR | 0 | |||
| 10174856-131LF | Amphenol FCi | 10174856-131LF-MTK PWR 5.7 TPA | 0 | |||
| 91931-31131LF | Amphenol FCi | CONAN R ECE RoHS : Compliant |
| 0 | ||
| 88924-131LF | Amphenol FCi | 88924-131LF-METRAL HDR 4RX8M S RoHS : Compliant | 0 | |||
| 10136647-031131LF | Amphenol FCi | 10136647-031131LF-MINITEK PWR4 RoHS : Unknown | 0 | |||
| 10138400-111131LF | Amphenol FCi | RIGHT ANGLE CONAN PLUG-1013840 | 0 | |||
| 10137785-043131LF | Amphenol FCi | 10137785-043131LF-MTK 4.2 04P RoHS : Unknown | 0 | |||
| 91911-31131LF | Amphenol FCi | 91911-31131LF-CONAN HEADE RoHS : Compliant |
| 0 | ||
| 74744-131LF | Amphenol FCi | 74744-131LF-METRAL HDR 5RX8M S RoHS : Compliant | 0 | |||
| 10136647-041131LF | Amphenol FCi | 10136647-041131LF-MINITEK PWR4 RoHS : Unknown | 0 | |||
| 10137785-032131LF | Amphenol FCi | 10137785-032131LF-MINITEK PWR4 RoHS : Unknown | 0 | |||
| 10136647-043131LF | Amphenol FCi | 10136647-043131LF-MTK 4.2 04P RoHS : Unknown | 0 | |||
| 74741-131LF | Amphenol FCi | 74741-131LF-METRAL HDR 5RX1M S RoHS : Compliant | 0 | |||
| 51939-131LF | Amphenol FCi | PWRBLADE RAH STB-51939-131LF RoHS : Compliant | 0 | |||
![]() PEI Genesis | FGG.0B.131.LC | LEMO connectors |
| 50 | ||
| 213-1L | HellermannTyton |
| 0 | |||
| FFA.0S.131.LC | LEMO connectors | RoHS : Compliant |
| 0 | ||
| FFM.1B.131.LC | LEMO connectors |
| 0 | |||
| 413-1-L-W24 | HellermannTyton |
| 0 | |||
| FFA.1S.131.LC | LEMO connectors | RoHS : Compliant |
| 0 | ||
| WA23-131L | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| FFM.0S.131.LC | LEMO connectors |
| 0 | |||
| FFM.0B.131.LC | LEMO connectors |
| 0 | |||
| FFM.1S.131.LC | LEMO connectors |
| 0 | |||
| 1019291-31L4 | SOURIAU-SUNBANK |
| 0 | |||
| FGG.1B.131.LCT | LEMO connectors |
| 0 | |||
| 213-1LW24 | HellermannTyton |
| 0 | |||
| 413-1-L | HellermannTyton |
| 0 | |||
![]() Powell Electronics | 91921-31131LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 3,260 | |
| 91901-31131LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 835 | ||
| 91900-21131LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 312 | ||
| BCS-131-L-D-PE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 185 | ||
| BCS-131-L-D-HE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 183 | ||
| BCS-131-L-S-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 183 | ||
| BCS-131-L-D-TE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 183 | ||
| SSM-131-LM-DV-BE | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 174 | ||
| SSM-131-L-SV | Samtec Inc | PCB Header, 2.54mm Pitch, SMT, Male RoHS : Compliant |
| 174 | ||
| SSM-131-L-DV | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 174 | ||
| BCS-131-L-S-PE | Samtec Inc | Pass-Through Socket Strip, 0.100" pitch RoHS : Compliant |
| 143 | ||
| SSM-131-L-DV-LC | Samtec Inc | Surface Mount PCB Socket Strips, 0.100" RoHS : Compliant |
| 96 | ||
| FGG.0B.131.LC | LEMO connectors | CONNECTOR |
| 33 | ||
| HFW1131L01P | CII Guardian | MIL/AERO RELAY HFW1131L01P |
| 15 | ||
| FFM.0S.131.LC | LEMO connectors | Standard Circular Connector |
| 12 | ||
![]() Richardson RFPD | HMC1131LC4 | Analog Devices Inc | RF Amp Single MMIC Amp 35GHz 5.5V 24-Pin CLLCC T/R RoHS : Compliant |
| 0 | |
| EV1HMC1131LC4 | Analog Devices Inc | HMC1131 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| HMC1131LC4TR | Analog Devices Inc | RF Amp Single MMIC Amp 35GHz 5.5V 24-Pin CLLCC T/R RoHS : Compliant |
| 0 | ||
| E3131LF | Rakon Limited | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
![]() Rutronik | LMUN2131LT1G | LRC Leshan Radio Co Ltd | DIGI-TRANS. 1,5K/2,9K SOT23 RoHS : Compliant |
| 15,000 | |
![]() Chip 1 Exchange | 91921-31131LF | Amphenol Corporation | INSTOCK | 6,422 | ||
NUC131LD2AE![]() | Nuvoton Technology Corp | INSTOCK RoHS : Compliant | 5,825 | |||
| BL-B5131L | INSTOCK | 4,000 | ||||
| 91932-31131LF | Amphenol Corporation | INSTOCK | 3,976 | |||
| HC11131-L6 | INSTOCK | 3,889 | ||||
| BL-B3131L | INSTOCK | 3,000 | ||||
| 91931-31131LF | Amphenol Corporation | INSTOCK | 2,600 | |||
| HC11131-L6 | Foxconn | INSTOCK | 300 | |||
| 75869-131LF | Amphenol FCi | INSTOCK RoHS : Compliant | 52 | |||
![]() Avnet Abacus | 75867-131LF | Amphenol Corporation | Conn Shrouded Header 6 POS 254mm Solder RA Through Hole (Alt: 75867-131LF) RoHS : Compliant | 2,400 | ||
| 75869-131LF | Amphenol Corporation | Pin Header WiretoBoard 254 mm 2 Rows 6 Contacts Through Hole FCI Quickie (Alt: 75869-131LF) RoHS : Compliant | 0 | |||
| 70233-131LF | Amphenol Corporation | (Alt: 70233-131LF) RoHS : Compliant | 0 | |||
| 74741-131LF | Amphenol Corporation | (Alt: 74741-131LF) RoHS : Compliant | 0 | |||
| 91931-31131LF | Amphenol Corporation | Mezzanine Connector Conan Receptacle 1 mm 2 Rows 31 Contacts Surface Mount Beryllium Copper (Alt: 91931-31131LF) RoHS : Compliant | 0 | |||
| 91931-31131LF | Amphenol Corporation | Mezzanine Connector Conan Receptacle 1 mm 2 Rows 31 Contacts Surface Mount Beryllium Copper - Tape and Reel (Alt: 91931-31131LF) RoHS : Compliant | 0 | |||
| 91911-31131LF | Amphenol Corporation | Conn Board to Board HDR 31 POS 1mm Solder ST SMD TR - Tape and Reel (Alt: 91911-31131LF) RoHS : Compliant | 0 | |||
| 91931-21131LF | Amphenol Corporation | Conn Board to Board RCP 31 POS 1mm Solder ST SMD Tube (Alt: 91931-21131LF) RoHS : Compliant | 0 | |||
| 91910-21131LF | Amphenol Corporation | Conn Board to Board HDR 31 POS 1mm Solder ST SMD Tube (Alt: 91910-21131LF) RoHS : Compliant | 0 | |||
| BCS-131-L-D-PE | Samtec Inc | (Alt: BCS-131-L-D-PE) RoHS : Compliant | 0 | |||
| BCS-131-L-S-TE | Samtec Inc | (Alt: BCS-131-L-S-TE) RoHS : Compliant | 0 | |||
| 4816P-T02-131LF | Bourns Inc | Resistor Network 130 Ohm 2 128 W 15 Resistors Bussed SOM Gull Wing Surface Mount (Alt: 4816P-T02-131LF) RoHS : Compliant | 0 | |||
| 4609X-101-131LF | Bourns Inc | Resistor Network 130 Ohm 2 113 W 8 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: 4609X-101-131LF) RoHS : Compliant | 0 | |||
| 4608X-102-131LF | Bourns Inc | Resistor Network 130 Ohm 2 1 W 4 Resistors Isolated SIP PC Pin Through Hole Thick Film (Alt: 4608X-102-131LF) RoHS : Compliant | 0 | |||
| 10138400-111131LF | Amphenol Corporation | - Tape and Reel (Alt: 10138400-111131LF) RoHS : Compliant | 0 | |||
![]() Avnet Asia | NSVMMUN2131LT1G | onsemi | PNP Bipolar Digital Transistor (BRT). ONSSPCTRNSTME1D1N; (Alt: NSVMMUN2131LT1G) RoHS : Compliant | 0 | ||
| 75869-131LF | Amphenol Corporation | Pin Header, Wire-to-Board, 2.54 mm, 2 Rows, 6 Contacts, Through Hole, FCI Quickie (Alt: 75869-131LF) RoHS : Compliant | 0 | |||
| 91911-31131LF | Amphenol Corporation | (Alt: 91911-31131LF) RoHS : Compliant | 0 | |||
| 51939-131LF | Amphenol Corporation | (Alt: 51939-131LF) RoHS : Compliant | 0 | |||
| 91910-21131LF | Amphenol Corporation | Conn Board to Board HDR 31 POS 1mm Solder ST SMD Tube (Alt: 91910-21131LF) RoHS : Compliant | 0 | |||
| 10174690-1SF131LF | Amphenol Corporation | FCI10174690-1SF131LF ASSY, CBL, BARKLIP, (Alt: 10174690-1SF131LF) RoHS : Compliant | 0 | |||
| 10180999-211131LF | Amphenol Corporation | (Alt: 10180999-211131LF) RoHS : Compliant | 0 | |||
| SFPP-3131-L | Pulse Electronics Corporation | SFP 2 by 2 Cage Connector (Alt: SFPP-3131-L) RoHS : Compliant | 0 | |||
| 75867-131LF | Amphenol Corporation | Conn Shrouded Header 6 POS 2.54mm Solder RA Through Hole (Alt: 75867-131LF) RoHS : Compliant | 0 | |||
| 91930-21131LF | Amphenol Corporation | (Alt: 91930-21131LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MMUN2131LT1G![]() | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2131LT1G) RoHS : Compliant | 102,000 | ||
| NRF9131-LACA-R | Nordic Semiconductor | Ultra Low Power Cellular IoT SIP LTEMNBIoT GNSS WL modem Compatible with nRF Cloud Services (Alt: NRF9131-LACA-R) RoHS : Compliant | 0 | |||
| NRF9131-LACA-R7 | Nordic Semiconductor | Ultra Low Power Cellular IoT SIP LTEMNBIoT GNSS WL modem Compatible with nRF Cloud Services (Alt: NRF9131-LACA-R7) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | 2322-704-61131L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 40,000 | |
| 2322-702-60131L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 4,420 | ||
| 2350-035-10131L | YAGEO Corporation | IN STOCK SHIP TODAY |
| 1,250 | ||
| 103-131-LSSS | Yokogawa Electric Corporation | IN STOCK SHIP TODAY |
| 2 | ||
| MC10131L | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
![]() EBV Elektronik | MMUN2131LT1G![]() | onsemi | PNP Bipolar Digital Transistor BRT ONSSPCTRNSTME1D1N (Alt: MMUN2131LT1G) RoHS : Compliant | 0 | ||
| TPCA8131,LQ(S | Toshiba America Electronic Components | HALBLEITERBAUELEMENT TRANSISTOR MOSFET SOP8 SINGLE (Alt: TPCA8131,LQ(S) RoHS : Compliant | 0 | |||
| TPCC8131,LQ(S | Toshiba America Electronic Components | Transistor MOSFET PCH 30V 10A 8Pin TSON Advance (Alt: TPCC8131,LQ(S) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NSVMMUN2131LT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | |
![]() Master Electronics | KXT131LHS![]() | C&K Switches | Ultra Low Profile Top Actuated Tactile RoHS : Compliant |
| 0 | |
| S1SS-02-28-GF-21.31-L3 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-DE-009 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-DE-054 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-HE-005 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-HE-050 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-PE-034 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-PE-BE | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-TE-030 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-S-HE-006 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-DE-055 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-HE-051 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-PE-035 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-D-TE-031 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
| BCS-131-L-S-HE-007 | Samtec Inc | .100 (2.54 mm) Tiger Claw™ Pass-through Socket Strip RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE36131LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable Using 75 Ohm RG187 Coax, RoHS. PE36131LF is a 1.6/5.6 plug to BNC male cable using RG187 coax. This Pasternack 1.6/5.6 plug to BNC male cable assembly uses a 75 Ohm 1.6/5.6 for connector 1 and a 75 Ohm BNC for connector 2. Our plug 1.6/5.6 to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36131LF 1.6/5.6 plug to BNC male cable assembly is constructed with RG187 coax. | 417 | ||
| PE36131LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 12 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-12, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-12 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-12 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 12 inch length using 75 Ohm RG187 coax, RoHS. |
| 171 | ||
| PE36131LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 24 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-24, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-24 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-24 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 24 inch length using 75 Ohm RG187 coax, RoHS. |
| 85 | ||
| PE36131LF-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 36 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 36 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-36, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-36 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-36 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 36 inch length using 75 Ohm RG187 coax, RoHS. |
| 57 | ||
| PE36131LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 48 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 48 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-48, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-48 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-48 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 48 inch length using 75 Ohm RG187 coax, RoHS. |
| 42 | ||
| PE36131LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 60 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 60 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-60, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-60 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-60 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 60 inch length using 75 Ohm RG187 coax, RoHS. |
| 34 | ||
| PE36131LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 72 inches. 75 Ohm 1.6/5.6 Plug to 75 Ohm BNC Male Cable 72 Inch Length Using 75 Ohm RG187 Coax, RoHS., Radio frequency assembly 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG187 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG187 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and BNC cable connection on the other. Our 1.6/5.6 to BNC cable assemblies have a plug gender on end 1 and male on end 2. This 1.6/5.6 to BNC cable is a plug to male coax assembly, PE36131LF-72, can also be known as a 1.6/5.6 male to BNC plug cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to BNC plug cable assembly PE36131LF-72 is built with RG187 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE36131LF-72 can also be used in the other direction and will be BNC male to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to BNC cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to 75 Ohm BNC male cable 72 inch length using 75 Ohm RG187 coax, RoHS. |
| 28 | ||
| PE35131LF | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Male Cable Using RG393 Coax, LF Solder. PE35131LF is a TNC male right angle to TNC male cable using RG393 coax. This Pasternack TNC male right angle to TNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35131LF TNC male right angle to TNC male cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W02131LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600-DB Coax, LF Solder, RoHS. PE3W02131LF is a N male to N male cable using LMR-600-DB coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02131LF N male to N male cable assembly is constructed with LMR-600-DB coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W16131LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-400-LLPX Coax with HeatShrink, LF Solder. PE3W16131LF/HS is a N male to N male cable using LMR-400-LLPX coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16131LF/HS N male to N male cable assembly is constructed with LMR-400-LLPX coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W17131LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to N Female Cable Using LMR-195-UF Coax with HeatShrink, LF Solder. PE3W17131LF/HS is a reverse polarity SMA female to N female cable using LMR-195-UF coax. This Pasternack reverse polarity SMA female to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity female SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17131LF/HS SMA reverse polarity female to N female cable assembly is constructed with LMR-195-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE33131LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. N Male to TNC Female Cable Using RG8 Coax with HeatShrink, LF Solder. PE33131LF/HS is a N male to TNC female cable using RG8 coax. This Pasternack N male to TNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33131LF/HS N male to TNC female cable assembly is constructed with RG8 coax. | 0 | |||
| PE3131LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Female Bulkhead Cable Using RG223 Coax, LF Solder. PE3131LF is a SMA male right angle to BNC female bulkhead cable using RG223 coax. This Pasternack SMA male right angle to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. SMA right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3131LF SMA male right angle to BNC female bulkhead cable assembly is constructed with RG223 coax. | 0 | |||
![]() Vyrian | HMC1131LC4TR | Analog Devices Inc | Wide Band Low Power Amplifier, 24000MHz Min, 35000MHz Max, 1 Func, GAAS RoHS : Compliant | 11,420 | ||
| TMP6131LPG | Texas Instruments | Analog Circuit, 1 Func RoHS : Unknown | 9,694 | |||
| HMC1131LC4 | Analog Devices Inc | Wide Band Low Power Amplifier, 24000MHz Min, 35000MHz Max, 1 Func, GAAS RoHS : Compliant | 9,016 | |||
| PTMP6131LPGM | Texas Instruments | Analog Circuit, 1 Func RoHS : Compliant | 8,609 | |||
| EV1HMC1131LC4 | Analog Devices Inc | RoHS : Compliant | 8,390 | |||
| 91900-21131LF | Amphenol Communications Solutions | Board Stacking Connector, 31 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Locking, Natural Insulator, Receptacle | 8,097 | |||
| UC17131L | Texas Instruments | Peripheral Driver, 1 Driver, BIPolar, CQCC8 RoHS : Not Compliant | 7,692 | |||
MC10H131L![]() | onsemi | D Flip-Flop, 10H Series, 1-Func, Positive Edge Triggered, 2-Bit, Complementary Output, ECL, CDIP16 RoHS : Not Compliant | 6,094 | |||
| MT9M131L12STC | Micron Technology Inc | Image Sensor, 1280 Horiz pixels, 1024 Vert pixels, Surface Mount | 5,853 | |||
| MT9D131L12STCES | Micron Technology Inc | CMOS Sensor, 1600 Horiz pixels, 1200 Vert pixels, 15fps, 0.40-2.40V, Square, Surface Mount RoHS : Compliant | 5,765 | |||
| BSS131L6327HTSA1 | Infineon Technologies AG | Small Signal Field-Effect Transistor, 0.11A I(D), 240V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 4,925 | |||
| MT9M131L12STCES | Micron Technology Inc | CMOS Sensor, 1280 Horiz pixels, 1024 Vert pixels, 15fps, 0.30-3.10V, Square, Surface Mount | 4,789 | |||
| MT9D131L12STC | Micron Technology Inc | Image Sensor | 4,590 | |||
| MT9V131L12STC | Micron Technology Inc | Image Sensor, 640 Horiz pixels, 480 Vert pixels, Surface Mount | 4,209 | |||
| PTMP6131LPGMQ1 | Texas Instruments | Analog Voltage Output Sensor, Rectangular, Through Hole Mount | 3,593 | |||
![]() Win Source Electronics | AR8131L-AL1E-R | Qualcomm Atheros |
| 17,189 | ||
| AR8131L-AL1E | Qualcomm Atheros |
| 17,155 | |||
| BSS131 L6327 | Infineon Technologies AG |
| 800 | |||
| BSS131L6327HTSA1 | Infineon Technologies AG | MOSFET N-CH 240V .11A SOT-23 RoHS : Compliant |
| 740 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |