 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1183AG-50-AF5-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 ComSIT USA | TPL1183525262J261 | TDK Corporation | AVAILABLE EU | 15,000 | ||
 NexGen Digital | ERJ-2RKF1183 | Panasonic Electronic Components | 10,000 | |||
| ERJ-3EKF1183V | Panasonic Electronic Components | 200 | ||||
| PVA1183C-LF | Z-Communications Inc | 49 | ||||
| SFS1183C-LF | Z-Communications Inc | 16 | ||||
 Rutronik | CR10-1183-FN | ASJ Holdings Limited | RC0402 118K 1% 0,063W TK100 RoHS : Compliant |
| 250,000 | |
| CR21-183-JL | ASJ Holdings Limited | RC0805 18K 5% 0,125W TK100 RoHS : Compliant |
| 150,000 | ||
| PH1-02-VM-.118/.335-L-HT | Adam Technologies Inc | 02P Pin Header 1R 2.54mm HighTemp GOLD RoHS : Compliant |
| 14,000 | ||
 Braemac Americas-Symmetry | AISR-01-183J | Abracon Corporation | RoHS : Compliant |
| 0 | |
 EBV Elektronik | 1N1183A | Microchip Technology Inc | Std Rectifier DO5 (Alt: 1N1183A) RoHS : Not Compliant | 0 | ||
| CA11183_BROOKE-W | LEDIL | Brooke Reflectors For Bridgelux BXRA CNW 080012002000 Series Of LEDs (Alt: CA11183_BROOKE-W) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN | LEDIL | Square Lens Assembly For LUXEON H502 Oslon Square PC NF2x757D Oslon SSL 150 XPEHEW XPE2 LED (Alt: CA11837_LAURA-M-PIN) RoHS : Compliant | 0 | |||
| CA11837_LAURA-M-PIN-WHT | LEDIL | Accessories for LEDs Lens Cooling (Alt: CA11837_LAURA-M-PIN-WHT) RoHS : Compliant | 0 | |||
 Maritex | AX93221-18-36 | Axiomtek Co Ltd | Converter 18/36bit LVDS to DVI-D |
| 1 | |
 Pasternack Enterprises US | PE3W11838-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 36 Inch Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 36 inch length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 36 inch length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-36, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-36 is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 36 inch length. |
| 132 | |
| PE3W11838-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SHV Jack Bulkhead to SHV Jack Bulkhead Cable Using RG188 Coax In 100 CM Length., Radio frequency assembly SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to SHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV bulkhead cable connection on one end and SHV bulkhead cable connection on the other. Our SHV to SHV cable assemblies have a jack gender on end 1 and jack on end 2. This SHV to SHV cable is a jack to jack coax assembly, PE3W11838-100CM, can also be known as a SHV female to SHV female cable assembly and will be shipped same-day as it is purchased. SHV female to SHV female cable assembly PE3W11838-100CM is built with RG188 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to SHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SHV jack bulkhead to SHV jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SHV female bulkhead to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to SHV cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV jack bulkhead to SHV jack bulkhead cable using RG188 coax in 100 cm length. |
| 48 | ||
| PE3M0118-30 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 BNC Male to TNC Male Cable 30 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0013 BNC cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our M39012/16-0013 BNC to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0013 BNC to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0118-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly PE3M0118-30 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/16-0013 BNC cable assembly is manufactured with M39012/16-0013 BNC to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/16-0013 BNC male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0118-30 can also be used in the other direction and will be M39012/26-0010 TNC male to M39012/16-0013 BNC male cable assembly if the opposite connectivity is required. M39012/16-0013 BNC plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0013 BNC to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0013 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable 30 inch length using M17/28-RG58 coax. |
| 4 | ||
| PE3W01183 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using RG223 Coax. PE3W01183 is a MCX plug to BNC male cable using RG223 coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01183 MCX plug to BNC male cable assembly is constructed with RG223 coax. | 0 | |||
| PE36118-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 36 inches. MC-Card Plug to MC-Card Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MC-Card cable connection on one end and MC-Card cable connection on the other. Our MC-Card to MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36118-36, can also be known as a MC-Card male to MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36118-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with MC-Card to MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card plug to MC-Card plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card male to MC-Card male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug to MC-Card plug cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W11830 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG141 Coax. PE3W11830 is a N male right angle to N male right angle cable using RG141 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11830 N male right angle to N male right angle cable assembly is constructed with RG141 coax. | 0 | |||
| PE3W11836LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. HN Male to C Male Cable Using RG213 Coax, LF Solder. PE3W11836LF is a HN male to C male cable using RG213 coax. This Pasternack HN male to C male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm C for connector 2. Our male HN to male C cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11836LF HN male to C male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W11831/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Jack Bulkhead to SMA Male Right Angle Cable Using RG178 Coax with HeatShrink. PE3W11831/HS is a reverse polarity MCX jack bulkhead to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX jack bulkhead to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity jack MCX bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11831/HS MCX reverse polarity jack bulkhead to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3C1183LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. 7/16 DIN Male Right Angle to N Male Cable Using RG213 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and N type cable connection on the other. Our right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1183LF/HS can also be known as a right angle 7/16 DIN plug to type N plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to N type plug cable assembly PE3C1183LF/HS is built with RG213 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1183LF/HS can also be used in the other direction and will be N type male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male cable using RG213 coax with heatshrink, LF solder. | 0 | |||
| PE3C1183LF/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 7/16 DIN Male Right Angle to N Male Cable 24 Inch Length Using RG213 Coax with HeatShrink, LF Solder., Radio frequency assembly 7/16 DIN male right angle to N male cable 24 inch length using RG213 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male right angle to N male cable 24 inch length using RG213 coax with heatshrink, LF solder, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 7/16 DIN cable connection on one end and type N cable connection on the other. Our right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1183LF/HS-24 can also be known as a right angle 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3C1183LF/HS-24 is built with RG213 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 7/16 DIN right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1183LF/HS-24 can also be used in the other direction and will be type N male to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. 7/16 DIN right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male right angle to N male cable 24 inch length using RG213 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W11835-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 1.0/2.3 Plug to N Male Right Angle Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly 1.0/2.3 plug to N male right angle cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0/2.3 plug to N male right angle cable 36 inch length using RG316 coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.0/2.3 cable connection on one end and right angle type N cable connection on the other. Our 1.0/2.3 to right angle type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W11835-36 can also be known as a 1.0/2.3 male to right angle N type plug cable assembly and will be shipped same-day as it is purchased. 1.0/2.3 male to type N plug cable assembly PE3W11835-36 is built with RG316 which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to right angle type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 1.0/2.3 plug to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11835-36 can also be used in the other direction and will be right angle type N male to 1.0/2.3 plug cable assembly if the opposite connectivity is required. 1.0/2.3 male to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to N type cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 1.0/2.3 plug to N male right angle cable 36 inch length using RG316 coax. |
| 0 | ||
| PE3W11831 | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. Reverse Polarity MCX Jack Bulkhead to SMA Male Right Angle Cable Using RG178 Coax. PE3W11831 is a reverse polarity MCX jack bulkhead to SMA male right angle cable using RG178 coax. This Pasternack reverse polarity MCX jack bulkhead to SMA male right angle cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm SMA for connector 2. MCX to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity jack MCX bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11831 MCX reverse polarity jack bulkhead to SMA male right angle cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W11830LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. N Male Right Angle to N Male Right Angle Cable Using RG141 Coax with HeatShrink, LF Solder. PE3W11830LF/HS is a N male right angle to N male right angle cable using RG141 coax. This Pasternack N male right angle to N male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. N right angle to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11830LF/HS N male right angle to N male right angle cable assembly is constructed with RG141 coax. | 0 | |||
| PE3C11183/HS | Pasternack Enterprises | 0 | ||||
| PE3W11832 | Pasternack Enterprises | Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 3.5mm Male to Slide-On BMA Plug Bulkhead Cable Using RG405 Coax. PE3W11832 is a 3.5mm male to BMA plug bulkhead cable using RG405 coax. This Pasternack 3.5mm male to BMA plug bulkhead cable assembly uses a 50 Ohm 3.5mm for connector 1 and a 50 Ohm BMA for connector 2. Our male 3.5mm to plug BMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W11832 3.5mm male to BMA plug bulkhead cable assembly is constructed with RG405 coax. | 0 | |||
 TE Connectivity | 2118309-4 | TE Connectivity | DUAL BAND WIFI, 2.4 & 5GHZ, PCB W/MHF4 Antenna Type: PCB Band Type: Dual Band Primary Application: Wi-Fi Communication Protocol: Bluetooth Zigbee Wi-Fi Mounting Location: Internal/Embedded PCB Dual Band Wi-Fi Bluetooth | Antenna | Part Number: 2118309-4 | Internal Number: 2118309-4 | TE Connectivity RoHS : Compliant |
| 2,072 | |
| 5650118-3 | TE Connectivity | CONN SEC II 6 POS 100C/L R/A Connector System: Board-to-Board Number of Positions: 12 Centerline (Pitch): .1 in Centerline (Pitch): 2.54 mm Contact Current Rating (Max): 3 A Board-to-Board 12 .1" 2.54 mm | Card Edge Power Connector | Part Number: 5650118-3 | Internal Number: 5650118-3 | .1" | TE Connectivity RoHS : Compliant |
| 1,929 | ||
| 1776118-3 | TE Connectivity | 3P TERMI-BLOK,PCB,HIGH TEMP Number of Positions: 3 Terminal Block Connector Type: Header Connector System: Wire-to-Board Centerline (Pitch): .197 in Centerline (Pitch): 5 mm PCB Terminal Block | 3 Header Wire-to-Board .197" | Part Number: 1776118-3 | Internal Number: 1776118-3 | .197" | TE Connectivity RoHS : Compliant |
| 1,721 | ||
| 2118308-2 | TE Connectivity | 4G WORLD BAND, METASPAN, PCB, W/MHF4L Antenna Type: PCB Band Type: Multi Band Primary Application: Wi-Fi Cat-M/NB-IoT Cellular Communication Protocol: Bluetooth Wi-Fi Cellular Cat-M/NB-IoT Mounting Location: Internal/Embedded PCB Multi Band Wi-Fi Bluetooth | Antenna | Part Number: 2118308-2 | Internal Number: 2118308-2 | TE Connectivity RoHS : Compliant |
| 198 | ||
 Venkel Ltd. | CR0402-16W-1183FT | VENKEL LTD | Chip Resistor;0402;1/16W;118K;�1% RoHS : Compliant | 10,000 | ||
| C1825X7R201-183KNE | VENKEL LTD | HV Chip Capacitor;1825;X7R;200V;0.018uF;�10% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-1183FT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;118K;�1% RoHS : Compliant | 0 | |||
| PWCR0402-AK-1183FT | VENKEL LTD | Pulse Withstanding CR;0402;1/5W;�100PPM;118K;�1% RoHS : Compliant | 0 | |||
| CR1206-4W-1183DT | VENKEL LTD | Chip Resistor;1206;1/4W;118K ;�0.5% RoHS : Compliant | 0 | |||
| HPTF0603-SE-1183CT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�25PPM;118K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UC-1183UT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;118K ;�0.01% RoHS : Compliant | 0 | |||
| PWCR1206-WK-1183DT | VENKEL LTD | Pulse Withstanding CR;1206;3/4W;�100PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-1183AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
| UPTF0805-10W-E-1183AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-K-1183DT | VENKEL LTD | Thin Film CR;0402;1/16W;�100PPM;118K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-1183DT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;118K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-K-1183BT | VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;118K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-1183FT | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;118K ;�1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-1183AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;118K ;�0.05% RoHS : Compliant | 0 | |||
 Vyrian | TPL1183525-242Y-236N | TDK Corporation | General Purpose Inductor, 2360uH, 3%, 1 Element, SMD, 4614 RoHS : Compliant | 18,352 | ||
| LT1183CS-TRPBF | Analog Devices Inc | 10,211 | ||||
5962-87671183A | Texas Instruments | OT PLD, 10ns, PAL-Type, TTL, CQCC28 RoHS : Not Compliant | 9,403 | |||
| 118372-HMC706LC3C | Analog Devices Inc | 9,297 | ||||
| MAX1183ECM/GG8 | Analog Devices Inc | ADC, Flash Method, 10-Bit, 1 Func, 2 Channel, Parallel, Word Access, PQFP48 RoHS : Not Compliant | 9,028 | |||
| MAL211836101E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Through Hole Mount RoHS : Compliant | 8,533 | |||
| LT1183CS#PBF | Analog Devices Inc | Fluorescent Light Controller, Current-mode, 1.25A, 200kHz Switching Freq-Max, BIPolar, PDSO16 RoHS : Compliant | 7,935 | |||
| 118329-HMC627LP5 | Analog Devices Inc | 6,814 | ||||
| 74AC11833NT | Texas Instruments | Bus Transceiver, AC Series, 1-Func, 8-Bit, True Output, CMOS, PDIP28 RoHS : Not Compliant | 6,753 | |||
| 54ACT11833FK | Texas Instruments | Bus Transceiver, ACT Series, 1-Func, 8-Bit, True Output, CMOS, CQCC28 RoHS : Not Compliant | 5,997 | |||
| LT1183CS-PBF | Analog Devices Inc | 5,258 | ||||
| LT1183CS#TRPBF | Analog Devices Inc | Switching Regulator/Controller, Current-mode, 240kHz Switching Freq-Max, BIPolar, PDSO16 RoHS : Compliant | 5,156 | |||
| 1N1183A | Microchip Technology Inc | Rectifier Diode, 1 Phase, 1 Element, 40A, 50V V(RRM) RoHS : Compliant | 1,901 | |||
| 21033211830 | Harting Electronics & Kg | Circular Connector | 752 | |||
| 121183-0106 | ITT Interconnect Solutions | MIL Series Connector, 17 Contact(s), Aluminum Alloy, Female, Crimp Terminal, Plug RoHS : Not Compliant | 701 | |||
 Win Source Electronics | TLV7111830DSER | Texas Instruments | IC REG LIN 1.8V/3V 200MA 6WSON / Over-Current and Thermal Protection RoHS : Compliant |
| 15,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand