1103-G-RV Price, nhà phân phối, Stock

MCPCB, thermal conductivity 2W/(m*K), thickness: 2mm, number of layers - 1, white soldermask, legend color: gold, size: diameter 31mm, pad cover: gold; for MX LEDs, /3

300 : $0.369
100 : $0.417
20 : $0.456
1 : $0.499

423

1600641103

Molex

Male Pin Headers; 1600641103; MOLEX; 2; Gold; 6
RoHS : Compliant

10 : $1.542
1 : $2.0233

379

MCP4011-103E/SN

Microchip Technology Inc

Integrated Circuit Digital Potentiometer; CH: 1; up/down Protocol; 4MHz; 1.8-5.5V; -40+125 deg.C; SMD; SO8
RoHS : Compliant

500 : $0.695
100 : $0.748
50 : $0.802
25 : $0.848
1 : $0.891

200

A11-0378

POKOJ

Installation terminal block; 1-level; 2-contacts; for wire 0,5-16,0mm2; screw terminal; grey; Din rail; 1000V/76A

60 : $2.469
30 : $2.55
5 : $2.659
1 : $2.744

SC-L-UL11-03-GN

Amphenol LTW Technology

UL11 3P SCREW O.D. 8.5~10.5MM

100 : $2.583
50 : $2.728
10 : $3.039
1 : $4.072

SC-L-UL11-03-AA

Amphenol LTW Technology

UL11 3P SCREW with additional seals

1 : $2.514

11-0360-LG

Koncept Inc

Wall mount system for Datalogic QuickScan readers

1 : $12.47

Pasternack Enterprises US

PE3C1103/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: RP, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Jack, Connector 2 Polarity: RP, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug Right Angle to Reverse Polarity SMA Jack Bulkhead Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead low loss cable using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle rp SMA cable connection on one end and rp SMA bulkhead cable connection on the other. Our low loss right angle rp SMA to rp SMA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C1103/HS can also be known as a low loss right angle rp SMA male to rp SMA female cable assembly and will be shipped same-day as it is purchased. Rp SMA male to rp SMA female cable assembly PE3C1103/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible rp SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this rp SMA right angle plug to rp SMA jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1103/HS can also be used in the other direction and will be rp SMA jack bulkhead to right angle rp SMA plug cable assembly if the opposite connectivity is required. Low loss SMA rp right angle male to SMA rp female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug right angle to reverse polarity SMA jack bulkhead low loss cable using LMR-195 coax with heatshrink.

570

PE3W11035-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400-UF coax, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3W11035-60 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3W11035-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male low loss cable 60 inch length using LMR-400-UF coax.

1 : $160.99
25 : $152.94
50 : $144.89
100 : $138.45

164

PE3W11035LF-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 24 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 24 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W11035LF-24 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11035LF-24 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3W11035LF-24 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $115.99
10 : $113.67
25 : $111.35
100 : $109.03

PE3W11035LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 4.3-10 Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-400-UF Coax with Times Microwave Components, LF Solder., Radio frequency assembly 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 4.3-10 male to 4.3-10 male low loss cable 36 inch length using LMR-400-UF coax with Times Microwave components, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a 4.3-10 cable connection on the other. Our low loss 4.3-10 to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W11035LF-36 can also be known as a low loss 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11035LF-36 RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 4.3-10 male to 4.3-10 male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 4.3-10 plug cable assembly PE3W11035LF-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $117.99
10 : $115.63
25 : $113.27
100 : $110.91

PE3C0110-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male With Times Connectors Cable 36 Inch Length Using LMR-600 Coax., Radio frequency assembly N male to N male with times connectors cable 36 inch length using LMR-600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N male with times connectors cable 36 inch length using LMR-600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3C0110-36, can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C0110-36 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male with times connectors cable 36 inch length using LMR-600 coax.

1 : $201.99
25 : $191.89
50 : $181.79

PE2CP1103

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 10 dB. Directional 10 dB SMA Coupler From 2 GHz to 18 GHz Rated to 50 Watts. RF coupler part number PE2CP1103 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2CP1103 is constructed with a coupling value of 10 dB and a coupler directivity of 12 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.7 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.7 dB and a maximum VSWR of 1.5. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1103 directional 10 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $872.99
10 : $838.07
25 : $803.15

PE3C1103

Pasternack Enterprises

PE3W11030LF

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm. UHF Female to UHF Male Cable Using RG58 Coax, LF Solder. PE3W11030LF is a UHF female to UHF male cable using RG58-TPX coax. This Pasternack UHF female to UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our female UHF to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11030LF UHF female to UHF male cable assembly is constructed with RG58-TPX coax.

PE3W11034

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SMP Female to SMA Male Cable Using PE-SR405AL Coax., Radio frequency assembly SMP female to SMA male cable using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable using PE-SR405AL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W11034 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W11034 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11034 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male cable using PE-SR405AL coax.

PE3W01103

Pasternack Enterprises

Key Specifications, Connector Series 1: SMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMC Jack Bulkhead to SMC Jack Bulkhead Cable Using RG58 Coax. PE3W01103 is a SMC jack bulkhead to SMC jack bulkhead cable using RG58 coax. This Pasternack SMC jack bulkhead to SMC jack bulkhead cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm SMC for connector 2. Our jack SMC bulkhead to jack SMC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01103 SMC jack bulkhead to SMC jack bulkhead cable assembly is constructed with RG58 coax.

PE3W11030

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58-TPX, RF Cable Type: RG58-TPX, RF Cable Impedance: 50 Ohm.

PE3C11038

Pasternack Enterprises

PE3W11034-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female to SMA Male Cable 6 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMP female to SMA male cable 6 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMA male cable 6 inch length using PE-SR405AL coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. PE3W11034-6 can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W11034-6 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11034-6 can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female to SMA male cable 6 inch length using PE-SR405AL coax.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

PE3W11103

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm.

PE3C11035/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using LMR-400 Coax with HeatShrink. PE3C11035/HS is a SMA female to SMA male cable using LMR-400 coax. This Pasternack SMA female to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C11035/HS SMA female to SMA male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

Teledyne HiRel

5962-89841103A

Teledyne HiRel

CONTACT SALES
RoHS : Not Compliant

Vyrian

3292W-1-103LF

Bourns Inc

Trimmer, Cermet, 0.5W, 10000ohm, 400V, 10% +/-Tol, 100ppm/Cel, 25 Turn(s)
RoHS : Compliant

17,427

3540S-1-103L

Bourns Inc

Potentiometer, Wire Wound, 2W, 10000ohm, 5% +/-Tol, 50ppm/Cel, 10 Turn(s)
RoHS : Compliant

15,310

10152821-103Q000LF

Amphenol Communications Solutions

Card Edge Connector, 164 Contact(s), 2 Row(s), Female, Straight, 0.039 inch Pitch, Solder Terminal, Locking, Black Insulator

14,110

2811103

Phoenix Contact

Transducers/Accessories
RoHS : Compliant

10,011

1911033

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

8,357

MAXQ1103-ENS+

Analog Devices Inc

Microcontroller, 32-Bit, 25MHz
RoHS : Compliant

8,137

STW81103AT

STMicroelectronics

Consumer Circuit, BICMOS
RoHS : Compliant

6,835

SN1103008IZLSR

Texas Instruments

6,343

V62/05611-03TE

Texas Instruments

Operational Amplifier, 1 Func, 4500uV Offset-Max, CMOS, PDSO5
RoHS : Compliant

6,151

3241103

Phoenix Contact

Cables/Accessories
RoHS : Compliant

5,592

2-1103004-3

TE Connectivity

Rectangular Power Connector, 15 Contact(s), Male, Crimp Terminal
RoHS : Compliant

5,493

74ACT11032PWLE

Texas Instruments

OR Gate, ACT Series, 4-Func, 2-Input, CMOS, PDSO16
RoHS : Not Compliant

3,927

XC5VLX110-3FF1760I

AMD Xilinx

Field Programmable Gate Array, 710MHz, 8640-Cell, CMOS, PBGA1760
RoHS : Not Compliant

3,867

WS1103-NR1

Broadcom Limited

3,213

54ACT11032J

Texas Instruments

OR Gate, ACT Series, 4-Func, 2-Input, CMOS, CDIP16
RoHS : Not Compliant

3,030

Waytek, Inc.

T30R0M4 111-03034

HellermannTyton

HellermannTyton T30R0M44 standard cable tie is a self-locking nylon tie with a 5.8" length for general-purpose wire, cable, hose, and tubing bundling. Its one-piece construction supports reliable fastening, clean harness organization, and everyday use in electrical and equipment applications.

1,000 : $0.0297
5,000 : $0.0265

89,000

0311030.M

Littelfuse Inc

30 Amp Fuses Glass AGC

50 : $0.2966
200 : $0.2786
500 : $0.2584
1,000 : $0.2412
5,000 : $0.2352

4,192

OS110-38

NSPA

12-10GA Ring 3/8" Connector Yellow Stripe Heat Shrink Clear 32505 32705 32805 32905

10 : $1.1786
50 : $1.0502
100 : $0.9529
200 : $0.9218
500 : $0.8907
1,000 : $0.8557

1,333

57360 OR 611-036

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #36 Band 1/2" 3/4" TO 2-3/4"

10 : $1.7326
50 : $1.5465
100 : $1.4033
200 : $1.3603
500 : $1.3103
1,000 : $1.2601

1,141

MLF110-38L

NSPA

22-10GA 3/8 Ring Terminal Yellow Heat Shrink & Solder Crimp

10 : $1.6287
50 : $1.4513
100 : $1.3169
200 : $1.2739
500 : $1.2309
1,000 : $1.1825

899

57320 OR 611-032

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #32 Band 1/2" 1-1/2" TO 2-1/2"

10 : $1.6991
50 : $1.5103
100 : $1.3704
200 : $1.3285
500 : $1.2795
1,000 : $1.2306

590

11030044

Molex

Removal Tool MOLEX 11030044 MINI FIT JR
RoHS : Compliant

1 : $27.95
10 : $26.28

252

WTU-110-38LC-BULK

NSPA

Non-Insulated Long Neck Ring Terminal, 12-10 Ga, #3/8 Stud

20 : $0.5876
50 : $0.5236
100 : $0.4751
200 : $0.4595
500 : $0.4441
1,000 : $0.4266

238

31-103

Pollak

Pollak 31-103 4-position ignition switch is a heavy-duty keyed ignition switch for automotive and equipment use. It provides 4-position circuit control in a panel-mounted housing, supporting accessory, ignition, and start switching from a single key actuator.

1 : $26.61
5 : $23.78
10 : $22.23
50 : $20.18
100 : $18.33
200 : $16.67

195

211036-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211036-0002 LED 30 W 12V 215,000 CANDLE 50,000 HOURS

1 : $359.16
5 : $342.43
10 : $325.68

211030-0002

Unity Manufacturing Co Ltd

6" Black Post-Mount Spotlight Unity 211030-0002 H3 100W Bulb 245,000 CANDLE 100 HRS 47858

1 : $203.67
5 : $195.36
10 : $188.08
25 : $177.69

22110-300

Eaton Electronics

10 AMP Circuit Breaker Type 1 ATC/ATO Bussmann 22110-30

1 : $3.4754
10 : $3.2198
50 : $3.1007
100 : $2.9302
200 : $2.7426
500 : $2.6233

Win Source Electronics

505110-3091

Molex

Conn; Rect; Rt. Angle; FFC/FPC; 0.50MM Pitch; 30 Circuit; Bottom Contact; ZIF
RoHS : Compliant

1,635 : $0.1836
1,225 : $0.2048
945 : $0.2118
690 : $0.2189
445 : $0.226
185 : $0.2754

169,823

3382H-1-103

Bourns Inc

SENSOR ROTARY 330DEG PC PIN
RoHS : Compliant

206 : $1.4606
154 : $1.6292
119 : $1.6853
87 : $1.7415
56 : $1.7977
23 : $2.1909

93,000

CDCLVC1103PWR

Texas Instruments

IC CLK BUFFER 1:3 250MHZ 8TSSOP
RoHS : Compliant

405 : $0.7455
325 : $0.7758
250 : $0.8061
175 : $0.8667
115 : $0.897
55 : $0.9576

54,880

TCMT1103

Vishay Huntington

Optocoupler DC-IN 1-CH Transistor DC-OUT 4-Pin Mini-Flat T/R / OPTOISOLATOR 3.75KV TRANS 4-SOP

1,100 : $0.2736
820 : $0.3051
635 : $0.3156
460 : $0.3262
300 : $0.3367
125 : $0.4103

51,000

3306P-1-103

Bourns Inc

TRIMMER 10K OHM 0.2W PC PIN TOP
RoHS : Compliant

1,055 : $0.2853
790 : $0.3182
610 : $0.3291
445 : $0.3401
285 : $0.3511
120 : $0.4279

20,003

B82422A1103K100

TDK Electronics

Inductor RF Molded Wirewound 10uH 10% 1MHz 27Q-Factor Ferrite 0.18A 1.6Ohm DCR 1210 Automotive T/R / FIXED IND 10UH 180MA 1.6 OHM SMD
RoHS : Compliant

2,110 : $0.1424
1,575 : $0.1588
1,220 : $0.1643
885 : $0.1697
575 : $0.1752
235 : $0.2135

18,800

3224J-1-103E

Bourns Inc

TRIMMER 10K OHM 0.25W SMD
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

8,680

3266W-1-103LF

Bourns Inc

TRIMMER 10K OHM 0.25W PC PIN / Res Cermet Trimmer 10K Ohm 10% 0.25W(1/4W) 12(Elec)Turns 1.78mm (6.71 X 4.5 X 8.26mm) Pin Thru-Hole Tube
RoHS : Compliant

265 : $1.1484
200 : $1.2809
155 : $1.325
110 : $1.3692
75 : $1.4134
30 : $1.7225

8,226

SN1111039AIDPKR

Texas Instruments

PROTOTYPE

24 : $14.0151
18 : $15.6323
14 : $16.1713
11 : $16.7104
7 : $17.2493
3 : $21.0226

7,200

0039281103

Molex

CONN HEADER VERT 10POS 4.2MM
RoHS : Compliant

810 : $0.4173
605 : $0.4655
470 : $0.4815
340 : $0.4975
220 : $0.5136
90 : $0.626

7,124