 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1085D2M80-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Master Electronics | RCV-00108517 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | |
| RCV-00108562 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCV-00108599 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| RCV-00110857 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| MW-20-03-G-D-141-085-P | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| MW-27-03-G-D-141-085 | Samtec Inc | 1.00 mm Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| DW-17-14-L-S-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-32-14-F-D-1085 | Samtec Inc | .100 Flex Stack Flexible Board Stacker .110 Tail RoHS : Compliant |
| 0 | ||
| DW-37-14-L-S-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DW-01-14-F-T-1085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HMTMS-108-54-G-D-002-002 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HMTMS-108-58-G-D-001-001 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HMTMS-108-59-S-D-000 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTMS-108-52-F-D | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
| HTMS-108-55-H-S | Samtec Inc | .050 X .100 High-Temp Through-hole Micro Terminal Strip RoHS : Compliant |
| 0 | ||
 Avnet Americas | LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator, 6.3V to 30V, 1.3V drop, 3.3V/3A out, TO-263AA-3 - Tape and Reel (Alt: LD1085D2M33R) RoHS : Compliant |
| 11,000 | |
| 26-48-1085 | Molex | Pin Header, 8 Contacts, 1 Row, 3.96mm, Matte Tin, 5A, Straight, Partially Shrouded, Brass, THT, PET - Bulk (Alt: 0026481085) RoHS : Compliant |
| 10,800 | ||
| LD1085D2T-R | STMicroelectronics | Adjustable LDO Voltage Regulator, 3V to 30V, 1.3V drop, 1.8V to 28V/3A out, TO-263-3 - Tape and Reel (Alt: LD1085D2T-R) RoHS : Compliant | 2,000 | |||
| ATS-PCBT1085 | Advanced Thermal Solutions Inc | BOARD LEVEL HEAT SINK - Bulk (Alt: ATS-PCBT1085) RoHS : Compliant |
| 1,000 | ||
| DW-04-14-G-D-1085 | Samtec Inc | - Bulk (Alt: DW-04-14-G-D-1085) RoHS : Compliant |
| 0 | ||
| HTMS-108-54-S-S | Samtec Inc | - Rail/Tube (Alt: HTMS-108-54-S-S) RoHS : Compliant |
| 0 | ||
| HTMS-108-56-L-D | Samtec Inc | Pin Header, Board-to-Board, 1.27 mm, 2 Rows, 16 Contacts, Through Hole, HTMS Series, Unshrouded - Rail/Tube (Alt: HTMS-108-56-L-D) RoHS : Compliant |
| 0 | ||
| R108550001 | Radiall | SBMA M STR THD PIN C100 - Bulk (Alt: R108550001) RoHS : Compliant |
| 0 | ||
| MW-20-03-G-D-141-085-P | Samtec Inc | - Rail/Tube (Alt: MW-20-03-G-D-141-085-P) RoHS : Compliant |
| 0 | ||
| 97-3100A-36(621)(0850) | Amphenol Corporation | - Bulk (Alt: 97-3100A-36(621)(0850)) RoHS : Not Compliant |
| 0 | ||
| 97-3106A-16(621)(0850) | Amphenol Corporation | - Bulk (Alt: 97-3106A-16(621)(0850)) RoHS : Not Compliant |
| 0 | ||
| 97-3107A-14S(621)(0850) | Amphenol Corporation | - Bulk (Alt: 97-3107A-14S(621)(0850)) RoHS : Not Compliant |
| 0 | ||
| 97-3107A-20(621)(0850) | Amphenol Corporation | - Bulk (Alt: 97-3107A-20(621)(0850)) RoHS : Not Compliant |
| 0 | ||
| VM581-08-500 | Amphenol Corporation | - Bulk (Alt: VM581-08-500) RoHS : Compliant |
| 0 | ||
| DW-32-14-F-D-1085 | Samtec Inc | Board Stackers & Spacers, Pin Header, 27.56 mm, 64 Contacts, Solder, 2 Rows, 2.54 mm, DW Series - Bulk (Alt: DW-32-14-F-D-1085) RoHS : Compliant |
| 0 | ||
 Newark | FMC1321085-48 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4 Ft, 1.21M; |Fairview Microwave FMC1321085-48 RoHS : Not Compliant |
| 904 | |
| DW-04-14-G-D-1085 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. DW-04-14-G-D-1085 RoHS : Compliant |
| 287 | ||
| HTMS-108-54-S-S | Samtec Inc | Pin Header, Htms-108-54-S-S; |Samtec, Inc. HTMS-108-54-S-S RoHS : Compliant |
| 187 | ||
| MTMS-108-51-S-S-175 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-S-S-175 RoHS : Compliant |
| 187 | ||
| MTMS-108-51-S-S-185 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-51-S-S-185 RoHS : Compliant |
| 187 | ||
| MTMS-108-52-S-S-205 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 8Pos; |Samtec, Inc. MTMS-108-52-S-S-205 RoHS : Compliant |
| 187 | ||
| HTMS-108-51-T-D | Samtec Inc | Pin Header, Htms-108-51-T-D; |Samtec, Inc. HTMS-108-51-T-D RoHS : Compliant |
| 173 | ||
| HTMS-108-54-S-D | Samtec Inc | Pin Header, Htms-108-54-S-D; |Samtec, Inc. HTMS-108-54-S-D RoHS : Compliant |
| 173 | ||
| MTMS-108-52-G-D-200 | Samtec Inc | Hdr, Brd-To-Brd, 1.27Mm, 16Pos; |Samtec, Inc. MTMS-108-52-G-D-200 RoHS : Compliant |
| 173 | ||
| 1085 | Weller Hand Tools GmbH | Baffle Kit; |Weller (Apex Tool Group) 1085 RoHS : Not Compliant |
| 144 | ||
| HTMS-108-54-S-S-SM | Samtec Inc | Pin Header, Htms-108-54-S-S-Sm; |Samtec, Inc. HTMS-108-54-S-S-SM RoHS : Compliant |
| 137 | ||
| 861021085019 | Wurth Elektronik | Cap, 680Uf, 200V, Alu Elec, Snap-In; |Würth Elektronik 861021085019 RoHS : Compliant |
| 18 | ||
| DA61-08574A | Samsung Semiconductor | Upper Hinge; |Samsung DA61-08574A RoHS : Not Compliant |
| 1 | ||
| 1085 | Pelican Products Inc | 1085 Hardback Case; |Pelican Products 1085 RoHS : Not Compliant |
| 0 | ||
| 1085 | Adafruit Industries | Ads1115 16-Bit Adc - 4 Channel With Programmable Gain Amplifier - Stemma Qt/Qwiic Rohs Compliant: Yes |Adafruit 1085 RoHS : Compliant |
| 0 | ||
 Analog Devices Inc | DS1085Z-50+ | Analog Devices Inc | EconOscillator Frequency Synth RoHS : Compliant |
| 6,314 | |
| MAX1085BCSA+ | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 5,937 | ||
| DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency RoHS : Compliant |
| 5,902 | ||
| MAX1085BESA+ | Analog Devices Inc | 400ksps/300ksps, Single-Supply RoHS : Compliant |
| 3,217 | ||
| LT1085CT-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,450 | ||
| LT1085IM-3.6#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,350 | ||
| LT1085IT-5#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 1,311 | ||
| LT1085IM#TRPBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 163 | ||
| LT1085CM#PBF | Analog Devices Inc | 7.5A, 5A, 3A L Drop Pos Adj Re RoHS : Compliant |
| 102 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 55 | ||
| DC1085A | Analog Devices Inc | LTC3559EUD Demo Board- Linear |
| 38 | ||
| LT1085CM-3.3#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 27 | ||
| 108537-HMC517LC4 | Analog Devices Inc | HMC517LC4 Evaluation PCB |
| 25 | ||
| LT1085CM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
| LT1085IM-3.6#TRPBF | Analog Devices Inc | 3A, 5A, 7.5A L Drop Pos Fixed RoHS : Compliant |
| 0 | ||
 RS | 97-3106A-22(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 22 -55C, MIL-5015 TYPE, 97 SERIES |
| 224 | |
| 1710853 | RS Pro | ELECTROMECHANICAL BUZZER INTERNAL DRIVE 75DB 30MA 3V 3KHZ 9.6MM X 5MM |
| 150 | ||
| 97-3106A-28(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 28 -55C, MIL-5015 TYPE, 97 SERIES |
| 50 | ||
| 97-3106A-16(621)(0850) | Amphenol Industrial Operations | PLUG CONNECTOR, STRAIGHT, SOLID BACKSHELL 16 -55C, MIL-5015 TYPE, 97 SERIES |
| 41 | ||
| C85N10-85 | SMC Corporation of America | INTERCHANGEABLE CYLINDER, 10 X 85MM STROKE, DOUBLE ACTING SINGLE ROD, C85 SERIES |
| 11 | ||
| 1671085 (SAC-3P- 5 0-PUR/M 8FR-2L) | Phoenix Contact | CABLE ASSEMBLY WITH A 3 POLE RIGHT ANGLE M8 SOCKET AND AN UNTERMINATED END |
| 10 | ||
| 10-2506.1085 | EAO AG | LED, SINGLE COLOR, BA9,GREEN, LUMI INTENSITY 1050 MCD,7MA,6VDC RoHS : Compliant |
| 5 | ||
| FMC0221085-36 | Fairview Microwave Inc | SMA MALE TO RA SMP FEMALE CABLE FM-F086 COAX IN 36 INCH |
| 3 | ||
| 56108 (56108-5) | Klein Tools Inc | POLY PULL LINE WITH ORANGE TRACER 500-FEET |
| 3 | ||
| R021M10852 | Bosch Rexroth | LINEAR GUIDE BALL RAIL SZ 15, LENGTH = 460MM, N ACCURACY, TOP MOUNT, R160510431 |
| 1 | ||
| LMF06 (10854) | Banner Engineering Corp | IVU MICROVIDEO 6 MM LENS, IMAGER SIZE: 1/3 IN, METAL HOUSING |
| 1 | ||
| MB 10858 II (3540858) | FIBOX | FIBOX - GRILLE/FILTER HOLDER, FOR MB 10564 II |
| 1 | ||
| AR1085CHFSC (8561659) | FIBOX | PC ENCLOSURE, 8" WIDE X 5" DEEP X 10" HIGH, HINGED OPAQUE FLAT SCREW COVER |
| 1 | ||
| 1085 | Adafruit Industries | ADS1115 16-BIT ADC - 4 CHANNEL WITH PROGRAMMABLE GAIN AMPLIFIER |
| 0 | ||
| 1085 | Apex Tool Group LLC | WELLER, 3-PIECE BAFFLE KIT FOR THE 6970, 1095 HEAT GUNS |
| 0 | ||
 STMicroelectronics | LD1085D2M33R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 9,814 | |
| LD1085D2M-R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,710 | ||
LD1085V50 | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 6,543 | ||
| LD1085D2T33R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 5,478 | ||
| LD1085V | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 2,301 | ||
| LD1085D2M18R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 1,660 | ||
| LD1085D2T-R | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 949 | ||
LD1085P | STMicroelectronics | 3 A low drop positive voltage regulator: adjustable and fixed RoHS : Compliant |
| 15 | ||
| STA1085POA3TR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085POA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOA | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EOATR | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
| STA1085EUA3 | STMicroelectronics | Accordo2 Dual Core CortexR4/CortexM3 processor, with embedded SRAM, integrated DSP sound subsystem, audio ADCs and DACs, isolated CAN MCU for car radio applications RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | GC1610-85 | Microchip Technology Inc | Si TVAR Hermetic Pill, Projected EOL: 2046-08-15 - Contact for Pricing RoHS : Compliant | 0 | ||
TC1108-5.0VDBTR | Microchip Technology Inc | 300mA LDO, SOT-223, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070 | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| DSC1101CI1-085.2070T | Microchip Technology Inc | MEMS OSC, LVCMOS, 85.207MHz, 50PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-09-05 RoHS : Compliant |
| 0 | ||
| OH-1710-DAE-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAE-1085-10M0000000, Projected EOL: 2051-08-02 - Contact for Pricing | 0 | |||
| OH-2010-DEX-1085-10M0000000 | Microchip Technology Inc | OH-2010-DEX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OH-1730-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1730-DAX-1085-10M0000000, Projected EOL: 2051-05-12 - Contact for Pricing | 0 | |||
| OH-1710-DAX-1085-10M0000000 | Microchip Technology Inc | OH-1710-DAX-1085-10M0000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
| OX-1740-BEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-BEE-1085-10M0000000, Projected EOL: 2051-03-16 - Contact for Pricing RoHS : Unknown | 0 | |||
| OX-1740-DEE-1085-10M0000000 | Microchip Technology Inc | OX-1740-DEE-1085-10M0000000, Projected EOL: 2051-08-12 - Contact for Pricing RoHS : Compliant | 0 | |||
 Bisco Industries | NAS1801-08-5 | Mac Fastteners Inc | 404 | |||
| NAS1801-08-5 | Crescent Manufacturing | 205 | ||||
| FT1085-8-1-2 | Fastener Technology Corp | 150 | ||||
| M23053/5-108-5 | MIL-SPEC Wire Cable Tubing Sleeve | 52 | ||||
| MS21085-12 | COLOC | 40 | ||||
| 10857 | MISC. CHEMICALS | 12 | ||||
| NAS1101-08-5 | NAS MACHINE SCREWS | 10 | ||||
| E3-1051-085 | Southco | VISE ACTION® Compression Latch, Large Size, Wing, Zinc Alloy, Powder Coated, Black, 31 mm (1.22 in) Grip |
| 10 | ||
| NAS1801-08-5 | NAS HEX CAP SCREWS | 7 | ||||
| KSS010-85TG | Advanced Interconnect | 5 | ||||
| MS20253-1-085 | MS Pins | 5 | ||||
| 9M1085-2-011 | Tech-Etch | 2 | ||||
| B6-30-10-85 | Thomas & Betts | 2 | ||||
| LT1085CT | ACTIVE COMPNTS/DIODES | 1 | ||||
| 17810856 | HEX HEAD CAP SCREWS | 1 | ||||
 Rochester Electronics | NCP81085MTTXG | onsemi | Gate Driver N-Channel MOSFET 2 Driver High-Side and Low-Side 9-SON T/R RoHS : Compliant |
| 8,000 | |
TPS61085PW | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 2.8V - 18.5V 2A (Switch) 8-SOP Tube RoHS : Compliant |
| 43 | ||
| MRF21085R3 | Freescale Semiconductor | RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 162 | ||
| LT1085CT | Linear Technology | Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 6 | ||
| LT1085IM-3.6#PBF | Linear Technology | IC VOLT REG Fixed 1 REG 3.6V 3A TO-263-4 Tube RoHS : Compliant |
| 22 | ||
| LT1085IT-12 | Linear Technology | Fixed Positive LDO Regulator, 12V, 1.2V Dropout, BIPolar, PSFM3 RoHS : Not Compliant |
| 1,102 | ||
DS1085LZ-25+ | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 5,067 | ||
| DS1085LZ-25B2+ | Maxim Integrated Products | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant |
| 3,900 | ||
| LM1085IS-12 | National Semiconductor Corporation | Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant |
| 1,670 | ||
| LM1085ISX-ADJ | National Semiconductor Corporation | IC VOLT REG Adjustable 1 REG 1.25V 3A TO-263-4 T/R RoHS : Not Compliant |
| 1 | ||
| LM1085IT-12/NOPB | National Semiconductor Corporation | IC VOLT REG Fixed 1 REG 12V 3A TO-220-3 Tube RoHS : Compliant |
| 118 | ||
| RAA2108502GLG#AG0 | Renesas Electronics Corporation | DC/DC CONVERTER 1 OUT 600mV to 5V 50A 250W 58-SMD Tray RoHS : Compliant |
| 1,435 | ||
| RAA2108502GLG#HG0 | Renesas Electronics Corporation | DC/DC CONVERTER 1 OUT 600mV to 5V 50A 250W 58-SMD T/R RoHS : Compliant |
| 200 | ||
| LD1085D2T33R | STMicroelectronics | IC VOLT REG Fixed 1 REG 3.3V 3A TO-263-3 T/R RoHS : Compliant |
| 3,000 | ||
| SP1085V-L | Sipex Corporation | IC VOLT REG Adjustable 1 REG 1.25V 3A TO-220-3 RoHS : Compliant |
| 51,461 | ||
 Sager | DW-04-14-G-D-1085 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 287 | |
| HTMS-108-54-S-S | Samtec Inc | Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 187 | ||
| HTMS-108-56-L-D | Samtec Inc | Headers & Wire Housings Through-hole Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 168 | ||
| 1085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| MW-20-03-G-D-141-085-P | Samtec Inc | Board to Board & Mezzanine Connectors 1.00 mm Flex Stack, Flexible Micro Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| MW-27-03-G-D-141-085 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 2-2842108-5 | TE Connectivity | Board to Board & Mezzanine Connectors 25P,2MM,BRK HDR,SRVT SMD,0.76AU,TB W/CAP RoHS : Compliant | 0 | |||
| 9729011085 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 510-91-085-13-081003 | Mill-Max Mfg Corp | IC & Component Sockets STANDRD SOLDER TAIL PGA SOCKET RoHS : Not Compliant | 0 | |||
| DW-32-14-F-D-1085 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HTMS-108-52-F-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTMS-108-55-H-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| FTR-108-51-T-D-P | Samtec Inc | Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 0 | ||
| FTR-108-52-G-S | Samtec Inc | Headers & Wire Housings Surface Mount Micro Header, 0.050 x 0.100 Pitch RoHS : Compliant |
| 0 | ||
| FTR-108-52-L-D-P-TR | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
 TME | 521085-1 | TE Connectivity | Connector: wire-wire; female; Automotive; standard; PIN: 7; crimped RoHS : Compliant |
| 341 | |
| 1085177 | Phoenix Contact | Automation module: switch Ethernet; unmanaged; 9÷32VDC; IP30 RoHS : Compliant |
| 1 | ||
| 108 518 F | RUKO GmbH | Drill: for metal; core; Ø: 18mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 522 F | RUKO GmbH | Drill: for metal; core; Ø: 22mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 534 | RUKO GmbH | Drill: for metal; core; Ø: 34mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 546 E | RUKO GmbH | Drill: for metal; core; Ø: 46mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 550 E | RUKO GmbH | Drill: for metal; core; Ø: 50mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 559 F | RUKO GmbH | Drill: for metal; core; Ø: 59mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 1085637 | Phoenix Contact | EMobility: cable; 5x25mm2,7x0.75mm2; 1kVDC; 700kW; IP54; 5m; 700A RoHS : Compliant |
| 0 | ||
| 1085641 | Phoenix Contact | EMobility: cable; 2x13mm2,5x25mm2,7x0.75mm2; 1kVDC; 700kW; IP54 RoHS : Compliant |
| 0 | ||
| 108 513 E | RUKO GmbH | Drill: for metal; core; Ø: 13mm; L: 88mm; weldon; 3/4" |
| 0 | ||
| 108 524 | RUKO GmbH | Drill: for metal; core; Ø: 24mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 526 F | RUKO GmbH | Drill: for metal; core; Ø: 26mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 530 F | RUKO GmbH | Drill: for metal; core; Ø: 30mm; L: 88mm; high speed steel; weldon |
| 0 | ||
| 108 554 E | RUKO GmbH | Drill: for metal; core; Ø: 54mm; L: 88mm; weldon; 3/4" |
| 0 | ||
 Ameya Holding Limited | LM1085IS-5.0/NOPB | Texas Instruments | RoHS : Compliant | 1,305 | ||
| LM1085IT-ADJ/NOPB | Texas Instruments | RoHS : Compliant | 1,050 | |||
| LM1085ISX-5.0/NOPB | Texas Instruments | RoHS : Compliant | 1,000 | |||
| TPS61085DGKT | Texas Instruments | MSOP 8/I°/18.5V, 2A, 650KHZ, 1.2MHZ STEP-UP DC-DC CONVERTER RoHS : Compliant | 42 | |||
| LM1085IT-3.3/NOPB | Texas Instruments | IC: voltage regulator; LDO,fixed; 3.3V; 3A; TO220-3; THT; tube; ±4% RoHS : Compliant | 40 | |||
| DS1085LZ-25+ | Analog Devices Inc | 3.3V EconOscillator Frequency Synthesizer RoHS : Compliant | 21 | |||
| LT1085CT#PBF | Analog Devices Inc | IC: voltage regulator; LDO,adjustable; 1.25÷28.5V; 3A; TO220; THT RoHS : Compliant | 14 | |||
 ComSIT USA | BI20001085 | IMESA | AVAILABLE EU | 23 | ||
| BI30001085 | AVED ELECTRONICS | AVAILABLE EU | 26 | |||
| 1085880000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 1,897 | |||
ComSIT USA | BUK10850DL | NXP Semiconductors | POWERMOS TRANSISTOR LOGIC LEVEL TOPFET Buffer/Inverter Based Peripheral Driver, PSSO2 RoHS : Compliant | 52,295 | ||
| LD1085D2M18R | STMicroelectronics | 3 AMP LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 3,000 | |||
| LD1085P | STMicroelectronics | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 2,134 | |||
| LT1085IM36TR | Linear Technology | 3A LOW DROPOUT POSITIVE FIXED REGULATOR Fixed Positive LDO Regulator, 3.6V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 1,118 | |||
| LT1085CT | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 1,019 | |||
| LM1085ISX33NOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 745 | |||
| LM1085ISADJ | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 472 | |||
| LD1085V | SGS Semiconductor Ltd | 3 AMP LOW DROP POSITIVE ADJUSTABLE VOLTAGE REGULATOR Adjustable Positive LDO Regulator, 1.225V Min, 1.275V Max, 1.5V Dropout, BIPolar RoHS : Compliant | 350 | |||
| LM1085ISADJNOPB | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 154 | |||
| 2510108530 | Wieland Electric GmbH | Electronic Component RoHS : Not Compliant | 143 | |||
| LD1085D2T25 | SGS Semiconductor Ltd | 3A LOW DROP POSITIVE FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 2.5V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Not Compliant | 125 | |||
| AZ1085S18EI | Diodes-BCD | Electronic Component RoHS : Compliant | 125 | |||
| LM1085IT12 | National Semiconductor Corporation | 3 AMP LOW DROPOUT POSITIVE REGULATOR Fixed Positive LDO Regulator, 12V, 1.5V Dropout, BIPolar, PSFM3 RoHS : Not Compliant | 109 | |||
| LT1085CTPBF | Linear Technology | 3 AMPERE LOW DROPOUT POSITIVE ADJUSTABLE REGULATOR Adjustable Positive LDO Regulator, 1.2V Min, 15V Max, 1.5V Dropout, BIPolar, PSFM3 RoHS : Compliant | 88 | |||
| MRF21085 | Freescale Semiconductor | THE RF MOSFET LINE N-CHANNEL ENHANCEMENT-MODE LATERAL RF POWER MOSFET RF Power Field-Effect Transistor, 1-Element, S Band, Silicon, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 12 | |||
 GLYN GmbH & Co. KG | ES51085FLW | Emerging Display Technolgies | LCD 128 x 64, FSTN positive, white LED Sitronix S | 17 | ||
 Interstate Connecting Components | 97-3106A-16(621)(0850) | Amphenol Industrial Operations |
| 50 | ||
| 97-3101A-16S(621)(0850 | Amphenol Industrial Operations |
| 7 | |||
| 97-3100A-36(621)(0850) | Amphenol Industrial Operations |
| 0 | |||
| 97-3102A-10SL(621)(085 | Amphenol Industrial Operations | SHELL ASSY | 0 | |||
| 97-3107A-20(621)(0850) | Amphenol Industrial Operations | 5015 QWK DIS PLG#20 |
| 0 | ||
| 710-858NF090909 | Glenair Inc | GTK CONDUIT FITTING | 0 | |||
| 710-858NF281428BT | Glenair Inc | 0 | ||||
| 97-3107A-28(621)(0850) | Amphenol Industrial Operations | 5015 QWK DIS PLG#28 |
| 0 | ||
| 710-858NF402828BT | Glenair Inc | 0 | ||||
| M85049/10-85W | Amphenol PCD | 26482 SII/83723 SIII/5015 Backshell Env-EMI/RFI |
| 0 | ||
| M85049/10-85W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S |
| 0 | ||
| C14621R0108544 | Amphenol Sine Systems | C146 HOOD SIZE A10 SINGLE LEVE | 0 | |||
| 447HS109NF2108-5L | Glenair Inc | BANDING CRIMP ADAPTER | 0 | |||
| 440HS069NF2108-5 | Glenair Inc | BANDING BACKSHELL SELF-LOCK STRAIGHT W SHRINK BOOT RoHS : Not Compliant |
| 0 | ||
| C09131T0051085U | Amphenol Sine Systems | FEMALE RECEPTACLE FLANGE FRONT | 0 | |||
 NexGen Digital | LT1085CT-3.3 | Linear Technology | RoHS : Not Compliant | 15 | ||
 PEI Genesis | M85049/10-85W | SOURIAU-SUNBANK |
| 0 | ||
| M85049/10-85W | Amphenol PCD |
| 0 | |||
| M85049/10-85B | SOURIAU-SUNBANK |
| 0 | |||
| G1085 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| C146-21R010-854-1 | Amphenol Tuchel |
| 0 | |||
| K1085 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 97-3106A-22-621-0850 | Amphenol Corporation |
| 0 | |||
| J1085B-12S-1RN | SOURIAU-SUNBANK |
| 0 | |||
| J1085C-12T-12N | SOURIAU-SUNBANK |
| 0 | |||
| J1085D-12T-4 | SOURIAU-SUNBANK |
| 0 | |||
| TP1085-5 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| C146-10R010-852-1 | Amphenol Tuchel |
| 0 | |||
| C146-10R010-854-4 | Amphenol Tuchel |
| 0 | |||
| M85049/10-85N | Amphenol PCD |
| 0 | |||
| M85049/10-85N | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | DW-04-14-G-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 189 | |
| HTMS-108-54-S-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 123 | ||
| MTMS-108-51-S-S-175 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-S-S-185 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-52-S-S-205 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-51-G-S-147 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| MTMS-108-53-G-S-280 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 123 | ||
| HMTMS-108-53-S-D-100 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 114 | ||
| MTMS-108-52-G-D-200 | Samtec Inc | .050" x .100" Variable Post Height Micro RoHS : Compliant |
| 114 | ||
| HTMS-108-51-T-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| HTMS-108-54-S-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 114 | ||
| HTMS-108-56-L-D | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 111 | ||
| DW-12-14-L-D-1085 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 94 | ||
| HTMS-108-54-S-S-SM | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 90 | ||
| ESW-108-59-L-S | Samtec Inc | .100 Low Profile Variable Post Height Te RoHS : Compliant |
| 32 | ||
 Richardson RFPD | 512PCA001085AAGR | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | |
| SI5335D-B10853-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| DC1085A | Analog Devices Inc | LTC3559 Battery Management 1.17VDC to 1.23VDC/2.43 RoHS : Compliant |
| 0 | ||
| SI5332ED10857-GM1R | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 333.33MHz-OUT 3 RoHS : Compliant | 0 | |||
| SI5335D-B10853-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 532EC001085DGR | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±20ppm LVPECL 55% 2.5V RoHS : Compliant |
| 0 | ||
| 512PCA001085AAG | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | ||
| 108537-HMC498LC4 | Analog Devices Inc | HMC498LC4 RF Amplifier Evaluation Board RoHS : Compliant |
| 0 | ||
| 934960108515 | Ampleon | Trans RF MOSFET N-CH 65V 3-Pin TO-270 T/R RoHS : Compliant | 0 | |||
| 5SXR20-1085 | Hitachi Energy | THERMAL MGMT ACCSY RoHS : Compliant | 0 | |||
| 512QCA001085AAGR | Skyworks Solutions Inc | Oscillator XO 50MHz/ 200MHz ±30ppm CMOS 52% 2.5V 6 RoHS : Compliant |
| 0 | ||
| LT1085CT-3.3#PBF | Analog Devices Inc | LDO Regulator Pos 3.3V 3A 3-Pin(3+Tab) TO-220 Tube RoHS : Compliant |
| 0 | ||
| 935384108598 | NXP Semiconductors | Trans RF MOSFET N-CH 179V 3-Pin NI-360H-2SB | 0 | |||
| LT1085IM-3.6#PBF | Analog Devices Inc | LDO Regulator Pos 3.6V 3A 4-Pin(3+Tab) DDPAK Tube RoHS : Compliant |
| 0 | ||
| 22541085 | HUBER+SUHNER | Conn Coaxial 200MHz Solder ST Panel Mount RCP Gold RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 12110853 | INSTOCK | 14,000 | |||
| LT1085CT | INSTOCK | 2,032 | ||||
| 1211085 | INSTOCK | 2,000 | ||||
| ACS108-55N | INSTOCK | 880 | ||||
| 0026481085 | INSTOCK | 547 | ||||
| PT12-B1-1-11.10857 | INSTOCK | 500 | ||||
| LD1085D2T33R | Intel Corporation | INSTOCK | 464 | |||
TJA1085HN,118 | NXP Semiconductors | INSTOCK RoHS : Compliant | 365 | |||
| LT1085CT-5 | INSTOCK | 217 | ||||
| LH701085 | Sharp Microelectronics of the Americas | INSTOCK | 200 | |||
| 6043B0108501 | INSTOCK | 195 | ||||
| TDA1085A | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 190 | |||
| LD1085D2M33 | INSTOCK | 150 | ||||
| SR130/1085A | Advanced-Connectek Inc | INSTOCK | 146 | |||
| LTA-1085 | INSTOCK | 116 | ||||
 Avnet Abacus | 522071085 | Molex | FFC FPC Board Connector Right Angle 1 mm 10 Contacts Receptacle EasyOn 52207 Surface Mount - Tape and Reel (Alt: 522071085) RoHS : Compliant | 4,000 | ||
| VC121085S151DP | Kyocera AVX Components | TVS Varistor 60 V 85 V 150 V 1210 3225 Metric Multilayer Varistor MLV (Alt: VC121085S151DP) RoHS : Compliant | 4,000 | |||
| 3KYY1108-554 | Grayhill Inc | CAN Keypad custom (Alt: 3KYY1108-554) RoHS : Compliant | 103 | |||
| 1085255 | Phoenix Contact | FL SWITCH 1016N FLSWITCH1016N (Alt: 1085255) RoHS : Compliant | 0 | |||
| 1108519 | Phoenix Contact | FMC 15 6ST35 GYAULCBKBD6 FMC156ST35GYAULCBKBD6 (Alt: 1108519) RoHS : Compliant | 0 | |||
| 1085821 | Phoenix Contact | PC 6 5ST1016 BDL1L2L3N PC65ST1016BDL1L2L3N (Alt: 1085821) RoHS : Compliant | 0 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 26481085 | Molex | (Alt: 26481085) RoHS : Compliant | 0 | |||
| 417910851 | Molex | (Alt: 417910851) RoHS : Compliant | 0 | |||
| 1108534-1 | TE Connectivity | (Alt: 1108534-1) RoHS : Not Compliant | 0 | |||
| EOE18010850 | Eltek | CS WSU STD 30KW 100 V (Alt: EOE18010850) RoHS : Compliant | 0 | |||
| M80C108536C | Harwin | HRWM80C108536C (Alt: M80C108536C) RoHS : Compliant | 0 | |||
| VP1085850000G | Amphenol Corporation | (Alt: VP1085850000G) RoHS : Compliant | 0 | |||
| DW-04-14-G-D-1085 | Samtec Inc | Stacking Board Connector DW Series 8 Contacts Header 254 mm Through Hole 2 Rows (Alt: DW-04-14-G-D-1085) RoHS : Compliant | 0 | |||
| FTR-108-54-G-S-P-TR | Samtec Inc | (Alt: FTR-108-54-G-S-P-TR) RoHS : Compliant | 0 | |||
Avnet Asia | 10127721-085SLF | Amphenol Corporation | (Alt: 10127721-085SLF) RoHS : Compliant |
| 3,375 | |
| BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | ||
| 2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, W/STOPPER (Alt: 2410850-2) RoHS : Compliant | 0 | |||
| 1-2410850-2 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-2) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | HiPow IR Emitting Diode 850nm -e3 (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| 10127721-085GRLF | Amphenol Corporation | (Alt: 10127721-085GRLF) RoHS : Compliant | 0 | |||
| X1E000021085300 | Epson Electronics America Inc | (Alt: X1E000021085300) RoHS : Compliant | 0 | |||
| 095-900-10852-1 | Amphenol Corporation | (Alt: 095-900-10852-1) RoHS : Compliant |
| 0 | ||
| 301085589 | Qnity Laird | MEC FOAM LOSSY 9X6X3.17MM (Alt: 301085589) RoHS : Compliant | 0 | |||
| 1-2410850-1 | TE Connectivity | RCPT CONN QSFP 112 STACKED, ALI (Alt: 1-2410850-1) RoHS : Compliant | 0 | |||
| 0417910852 | Molex | Pin Header, 5 Contacts, 1 Row, 3.96mm, Gold, 7A, Straight, Partially Shrouded, Brass, Wire-to-Board (Alt: 0417910852) RoHS : Compliant | 0 | |||
| 2-1419108-5 | TE Connectivity | (Alt: 2-1419108-5) RoHS : Compliant | 0 | |||
| 2150711085 | Molex | (Alt: 2150711085) RoHS : Compliant | 0 | |||
| 0522071085 | Molex | FFC / FPC Board Connector, 10 Contacts, 1 Row, 1mm, Top, Tin-Bismuth Plated, SMT, Right Angle, 0.3mm (Alt: 0522071085) RoHS : Compliant | 0 | |||
| 2108517-2 | TE Connectivity | Stamped Antenna, Dual Band, 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.875 GHz, Surface Mount (Alt: 2108517-2) RoHS : Compliant | 0 | |||
 Avnet Silica | LD1085D2M25R | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 274,000 | ||
| LD1085D2M18R | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 105,000 | |||
| LD1085D2M-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 76,000 | |||
| LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 76,000 | |||
| LD1085D2T-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2T-R) RoHS : Compliant | 58,000 | |||
| LD1085D2T33R | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| STA1085EUA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085EUA3) RoHS : Compliant | 0 | |||
| P3T1085UKAZ | NXP Semiconductors | (Alt: P3T1085UKAZ) RoHS : Compliant | 0 | |||
| STA1085POA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 600MHz 33V 361Pin LFBGA Tray (Alt: STA1085POA3) RoHS : Compliant | 0 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| STA1085POA3TR | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 600MHz 33V 361Pin LFBGA TR (Alt: STA1085POA3TR) RoHS : Compliant | 0 | |||
| STA1085ELA3S1 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3S1) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| TC1108-5.0VDBTR | Microchip Technology Inc | LDO Regulator Pos 5V 03A 4Pin3Tab SOT223 TR (Alt: TC1108-5.0VDBTR) RoHS : Compliant | 0 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | WH-PS710-850 | Nipron Co | Peripheral cable |
| 1 | |
| WH-PP610-850 | Nipron Co | RoHS : Compliant |
| 0 | ||
| CAB.01085 | Taoglas Antenna Solutions | IPEX MHFI(U.FL) to 200mm 1.37mm Black SMA(F)BKST |
| 0 | ||
 Component Electronics, Inc | TMS-108-52-T-S | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 300 | |
| LM1085IS-ADJ | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 235 | ||
| AME1085AMCT | AME Inc | IN STOCK SHIP TODAY |
| 150 | ||
| LT1085CM-3.3#TRPBF | Linear Technology | IN STOCK SHIP TODAY RoHS : Compliant |
| 54 | ||
| AME1085MCT | AME Inc | IN STOCK SHIP TODAY | 50 | |||
| AME1085DCDT | AME Inc | IN STOCK SHIP TODAY |
| 50 | ||
| AV108-59 | Alpha Industries | IN STOCK SHIP TODAY |
| 40 | ||
| AME1085DCDT-3 | AME Inc | IN STOCK SHIP TODAY |
| 40 | ||
EZ1085CM | Semtech Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 30 | ||
| 52207-1085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| 0522071085 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 26 | ||
| LT1085CT-5 | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 10 | ||
| 10850-054 | nVent Schroff | IN STOCK SHIP TODAY |
| 9 | ||
| 006-1085057 | NCR Corporation | IN STOCK SHIP TODAY | 7 | |||
| LT1085CT | Linear Technology | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
 DB Roberts | E5-1-085-061 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| E5-1-085-191 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-180 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 10853 | Heyco | HCPS-20 NATURAL | 0 | |||
| E5-1-085-130 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 135010859902 | Essentra Components | 0 | ||||
| 07900-01085 | Avdel | GUIDE TUBE | 0 | |||
| E5-1-085-160 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-080 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-161 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 110858 | Essentra Components | 0 | ||||
| 1085-SS | RAF Electronic Hardware | 0 | ||||
| E5-1-085-011 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| E5-1-085-071 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 110853 | Essentra Components | 0 | ||||
 EBV Elektronik | LD1085V | STMicroelectronics | LDO Regulator Pos 125V to 28V 3A 3Pin3Tab TO220 Tube (Alt: LD1085V) RoHS : Compliant | 1,100 | ||
| LD1085D2M-R | STMicroelectronics | Adjustable LDO Voltage Regulator 3V to 30V 13V drop 18V to 28V3A out TO2633 (Alt: LD1085D2M-R) RoHS : Compliant | 1,000 | |||
| LD1085D2T33R | STMicroelectronics | LDO Regulator Pos 33V 3A 3Pin2Tab D2PAK TR (Alt: LD1085D2T33R) RoHS : Compliant | 1,000 | |||
| VSMA1085600 | Vishay Intertechnologies | (Alt: VSMA1085600) RoHS : Compliant | 600 | |||
| FP11085_LISA2-RS-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11085_LISA2-RS-CLIP) RoHS : Compliant | 100 | |||
| SIM7912G-M2 S2-1085F-Z306Z | SIMCom | MultiBand LTEFDDLTETDDHSPA module (Alt: SIM7912G-M2 S2-1085F-Z306Z) RoHS : Compliant | 2 | |||
| STA1085ELA3 | STMicroelectronics | Microprocessor ARM CortexR4 Dual Core RISC 32Bit 450MHz 33V 361Pin LFBGA Tray (Alt: STA1085ELA3) RoHS : Compliant | 0 | |||
| VSMA1085400 | Vishay Intertechnologies | IR Emitter 860nm 1350mWsr 15A 355V 2Pin SMD TR (Alt: VSMA1085400) RoHS : Compliant | 0 | |||
| VSMA1085250 | Vishay Intertechnologies | (Alt: VSMA1085250) RoHS : Compliant | 0 | |||
| LD1085D2M18R | STMicroelectronics | Fixed LDO Voltage Regulator 425V to 30V 13V drop 18V3A out TO263AA3 (Alt: LD1085D2M18R) RoHS : Compliant | 0 | |||
| LD1085D2M33R | STMicroelectronics | Fixed LDO Voltage Regulator 63V to 30V 13V drop 33V3A out TO263AA3 (Alt: LD1085D2M33R) RoHS : Compliant | 0 | |||
| LD1085D2M25R | STMicroelectronics | LDO Regulator Pos 25V 3A 4Pin3Tab D2PAKA TR (Alt: LD1085D2M25R) RoHS : Compliant | 0 | |||
| TJA1085GHN/0Z | NXP Semiconductors | FlexRay Transceiver 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085GHN/0Z) RoHS : Compliant | 0 | |||
| TJA1085HN,118 | NXP Semiconductors | FlexRay Transceiver 4TX 4RX 10Mbps 44Pin HVQFN EP TR (Alt: TJA1085HN,118) RoHS : Compliant | 0 | |||
| SIM7906E-M2 S2-1085A-Z30KQ | SIMCom | Cellular Module DL CA LTEFDD LTETDD WCDMA 3135V to 44V 42mm x 30mm x 23mm (Alt: SIM7906E-M2 S2-1085A-Z30KQ) RoHS : Compliant | 0 | |||
 ECCO | 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | ||
| 97-3106A-22(621)(0850) | Amphenol Industrial Operations |
| 546 | |||
| 97-3100A-14S(621)(0850) | Amphenol Industrial Operations |
| 428 | |||
| 97-3102A-16(621)(0850) | Amphenol Industrial Operations |
| 403 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-16S(621)(0850) | Amphenol Industrial Operations |
| 49 | |||
| 97-3102A-18(B)(621)(0850) | Amphenol Industrial Operations |
| 41 | |||
| 97-3108A-16S(621)(0850) | Amphenol Industrial Operations | 25 | ||||
| 97-3101A-14S(B)(621)(0850 | Amphenol Industrial Operations |
| 25 | |||
| 97-3107A-16S(621)(0850) | Amphenol Industrial Operations |
| 20 | |||
| 97-3107A-16S(621)(0850) | Amphenol Industrial Operations |
| 20 | |||
| 97-3102A-28(621)(0850) | Amphenol Industrial Operations |
| 3 | |||
| 97-3102A-28(621)(0850) | Amphenol Industrial Operations |
| 3 | |||
| 97-3108B-28(621)(0850) | Amphenol Industrial Operations |
| 1 | |||
| 97-3108B-28(621)(0850) | Amphenol Industrial Operations |
| 1 | |||
 FDH Electronics | 512851085 | BJG Electronics | BJG Microwave C | 1,785,834 | ||
| 512001085 | BJG Electronics | BJG Microwave C | 1,785,834 | |||
| 512321085 | W L Gore & Associates | BJG Microwave C | 1,693 | |||
| M23053/5-108-5 | SUMITOMO ELECTRIC Industries Ltd | Harness Mgmt | 630 | |||
| 8001085 | Ellsworth Adhesives | Consumable | 300 | |||
| PS10-851-N | Connector Technology Inc | Circular Conn |
| 256 | ||
| PS10-851-UP | Connector Technology Inc | Connector Acc | 224 | |||
| J1085E-4S-3 | SOURIAU-SUNBANK | Backshells & Ac | 6 | |||
| J599EIE-1085/A10 | SOURIAU-SUNBANK | Connector 38999 |
| 4 | ||
| TF-1085 | Connector Technology Inc | Tooling - Test | 1 | |||
| M85049/10-85W | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/10-85N | Amphenol PCD | Backshells & Ac |
| 0 | ||
| 10-494891-085 | Amphenol Aerospace | Connector 38999 |
| 0 | ||
7012-1085 | Amphenol SV Microwave | Cable Assembly RoHS : Compliant |
| 0 | ||
| 440HS069NF2108-5 | Glenair Inc | Backshells & Ac RoHS : Not Compliant |
| 0 | ||
 Flip Electronics | NCP81085MTTXG | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,000 | |
| SI1085-A-GMR | Silicon Laboratories Inc | Stock, Ship Today |
| 1,568 | ||
 Maritex | LM1085IT-ADJ/NOPB | Texas Instruments | LDO Regulators; LM1085IT-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A RoHS : Compliant |
| 25,564 | |
UZ1085L-33-TN3-R | Unisonic Technologies Co Ltd | LDO Regulators; UZ1085L-33-TN3-R; UTC RoHS : Compliant |
| 2,642 | ||
| TPS61085PWR | Texas Instruments | DC DC Converters; TPS61085PWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1 RoHS : Compliant |
| 1,001 | ||
ADM1085AKSZ-REEL7 | Analog Devices Inc | Power Management ICs (PMICs); ADM1085AKSZ-REEL7; ANALOG DEVICES; 6; Surface Mount; SC; 1.1 mm RoHS : Compliant |
| 839 | ||
TPS61085TPWR | Texas Instruments | DC DC Converters; TPS61085TPWR; TEXAS INSTRUMENTS; 8; Boost; 1.2 mm; 1 RoHS : Compliant |
| 530 | ||
| LM1085R-3.3V | HTC Korea | Voltage Regulator; linear, LDO; fixed; Vout: 3.3V; Vin: 12V; Vd: 1.5V; 3A; -10+70 deg.C; SMD; TO263(D2PAK) |
| 337 | ||
| TPS61085DGKR | Texas Instruments | DC DC Converters; TPS61085DGKR; TEXAS INSTRUMENTS; 8; Boost; 0 m; 1 RoHS : Compliant |
| 212 | ||
| FP11085_LISA2-RS-CLIP | LEDIL | Lens for LED high power; angle: 9 to 26 degrees FWHM; Number of LEDs: 1; Dimensions: round 10mm; Height: 6.8mm; meterial: PMMA; PC; Fastening: glue; clips |
| 25 | ||
| LM1085ISX-ADJ/NOPB | Texas Instruments | LDO Regulators; LM1085ISX-ADJ/NOPB; TEXAS INSTRUMENTS; 3; 1; 3 A; 15 V RoHS : Compliant |
| 23 | ||
 Pasternack Enterprises US | PE3FCA108-5M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM4, 2.0mm LSZH, Aqua-5M. Pasternack’s PE3FCA108-5M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA108-5M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 96 | |
| PE91085 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 67 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Stainless Steel, Connector Body Plating 1: Gold, Connector Mount Method 2: None, Connector Body Material 2: Stainless Steel, Connector Body Plating 2: Gold. 1.85mm Male to 1.85mm Male Adapter. 1.85mm adapter PE91085 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 1.85mm to 1.85mm adapter is a in-series coaxial adapter design. This 50 Ohm 1.85mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 67 GHz. 1.85mm male to 1.85mm male adapter is one of the many RF components that ship same day as they are ordered. PE91085 male 1.85mm to male 1.85mm adapter has a straight body. This Pasternack straight 1.85mm coax adapter is a in-line RF adapter. Our male 1.85mm to male 1.85mm adapter PE91085 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 1.85mm to 1.85mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 17 | ||
| PE3C10858-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMP Female Non-Magnetic Cable 6 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10858-6 non-magnetic SMA male to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMP cable connection on the other. Our SMA to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10858-6 can also be known as a non-magnetic SMA plug to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10858-6 SMA plug to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a brass body with gold plating, while the other has the crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10858-6 can also be used in the other direction and will be an SMP female to SMA male cable assembly if the opposite connectivity is required. This non-magnetic SMA plug to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP non-magnetic RF cable assembly as per your requirements. |
| 10 | ||
| PE3C10859-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405-NM, RF Cable Type: PE-SR405-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMP Female to SMP Female Non-Magnetic Cable 24 Inch Length Using PE-SR405-NM Coax., Pasternack’s PE3C10859-24 non-magnetic SMP female to SMP female RF cable assembly using PE-SR405-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMP cable connection on one end and an SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10859-24 can also be known as a non-magnetic SMP jack to SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.125 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMP female to SMP female cable has a maximum VSWR of 1.4:1. This PE3C10859-24 SMP jack to SMP jack cable assembly is built with PE-SR405-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to SMP cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP jack to SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 5 | ||
| PE3C10855-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 60 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-60 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-60 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-60 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-60 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10855-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: BZ4, Connector 1 Body Plating: Copper-Tin-Zinc Alloy, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Female Bulkhead to BNC Female Bulkhead Non-Magnetic Cable 6 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10855-6 non-magnetic BNC female bulkhead to BNC female bulkhead RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC female to BNC female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a BNC bulkhead cable connection on one end and a BNC bulkhead cable connection on the other. Our BNC to BNC cable assembly has a female gender on end 1 and a female on end 2. PE3C10855-6 can also be known as a non-magnetic BNC jack to BNC jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10855-6 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our bulkhead BNC female to bulkhead BNC female cable has a maximum VSWR of 1.4:1. This PE3C10855-6 BNC jack to BNC jack cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a BZ4 body with copper-tin-zinc alloy plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic BNC jack bulkhead to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC non-magnetic RF cable assembly as per your requirements. |
| 1 | ||
| PE3C10853-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 12 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-12 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-12 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-12 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-12 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10853-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to SMP Female Right Angle Non-Magnetic Cable 24 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10853-24 non-magnetic 2.92mm male to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a 2.92mm cable connection on one end and a right angle SMP cable connection on the other. Our 2.92mm to SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10853-24 can also be known as a non-magnetic 2.92mm plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our 2.92mm male to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10853-24 2.92mm plug to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 24-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. PE3C10853-24 can also be used in the other direction and will be a right angle SMP jack to 2.92mm plug cable assembly if the opposite connectivity is required. This non-magnetic 2.92mm plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMP cable assembly for quick shipment worldwide. Variations of 2.92mm and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Female to N Female Cable Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. | 0 | |||
| PE3W10855 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Male to SMC Jack Cable Using RG316 Coax. PE3W10855 is a BNC male to SMC jack cable using RG316 coax. This Pasternack BNC male to SMC jack cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMC for connector 2. Our male BNC to jack SMC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10855 BNC male to SMC jack cable assembly is constructed with RG316 coax. | 0 | |||
| PE3C10851-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Bronze, Connector 1 Body Plating: Copper-Tin-Zinc Alloy over Silver, RF Cable Part Number: PE-SR047-NM, RF Cable Type: PE-SR047-NM, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMP Female Right Angle to SMP Female Right Angle Non-Magnetic Cable 6 Inch Length Using PE-SR047-NM Coax., Pasternack’s PE3C10851-6 non-magnetic right angle SMP female to right angle SMP female RF cable assembly using PE-SR047-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with a right angle SMP cable connection on one end and a right angle SMP cable connection on the other. Our SMP to SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C10851-6 can also be known as a non-magnetic right angle SMP jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.05 inches, allowing for a single bend without damaging the cable. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our right angle SMP female to right angle SMP female cable has a maximum VSWR of 1.7:1. This PE3C10851-6 SMP jack to SMP jack cable assembly is built with PE-SR047-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, and has a 50 Ohm impedance. Both the connectors have a crimp/solder attachment method and a bronze body with copper-tin-zinc alloy over silver plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMP right angle jack to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to SMP non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10856-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR141-NM, RF Cable Type: PE-SR141-NM, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Non-Magnetic Cable 12 Inch Length Using PE-SR141-NM Coax., Pasternack’s PE3C10856-12 non-magnetic SMA male to SMA male RF cable assembly using PE-SR141-NM coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax non-magnetic cable assembly is built with an SMA cable connection on one end and an SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C10856-12 can also be known as a non-magnetic SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.25-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our non-magnetic cable assembly features connectors made with materials adapted for non-magnetism with a higher signal-to-noise ratio (SNR) without field distortion. Our PE3C10856-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The semi-rigid RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 165 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. This PE3C10856-12 SMA plug to SMA plug cable assembly is built with PE-SR141-NM, which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long non-magnetic RF cable are available on our downloadable PDF datasheet. This non-magnetic SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA non-magnetic RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. C Female to N Female Cable 24 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 24 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 24 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-24 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-24 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-24 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-24 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10851LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: C, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. C Female to N Female Cable 12 Inch Length Using RG393 Coax, LF Solder., Radio frequency assembly C female to N female cable 12 inch length using RG393 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The C female to N female cable 12 inch length using RG393 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type C to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type C cable connection on one end and a type N cable connection on the other. Our type C to type N cable assembly has a female gender on end 1 and a female on end 2. PE3W10851LF-12 can also be known as a type C jack to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 3.9-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10851LF-12 RF cable has a FEP jacket of 0.390-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Type C jack to type N jack cable assembly PE3W10851LF-12 is built with RG393 which is a flexible coax type. The Pasternack flexible type C cable assembly is manufactured with type C to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10851LF-12 can also be used in the other direction and will be a type N female to type C female cable assembly if the opposite connectivity is required. Type C jack to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type C to type N cable assembly for quick shipment worldwide. Variations of type C and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type C to type N RF cable assembly as per your requirements. |
| 0 | ||
| PEWCA1085 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-159, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 5.38 GHz, Maximum Frequency: 8.17 GHz, Maximum VSWR: 1.25:1. WR-159 UDR58 Flange to SMA Female Waveguide to Coax Adapter Operating from 5.38 GHz to 8.17 GHz in Aluminum. PEWCA1085 WR-159 waveguide to coax adapter is also known as a WR-159 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR159 to SMA connector and has a female gender. Our WR159 to SMA female waveguide adapter transition has a right angle design and has a UDR58 flange. Pasternack right angle WR-159 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 5.38 GHz and a maximum frequency of 8.17 GHz. WR-159 waveguide to SMA transition adapter to coax PEWCA1085 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-159 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts. |
| 0 | ||
 Relay Specialties | 20110-85 | Deltrol Controls | Power Relay; 240 VAC 3C 3PDT; 10A; Plug-In 11-Pin Round |
| 3 | |
 TE Connectivity | 1-66108-5 | TE Connectivity | III+ SKT,26-24,TIN,STRIP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 26 – 24 AWG Wire Size: .12 – .2 mm² Tin (Sn) Socket 26 – 24 AWG | Connector Contact | Part Number: 1-66108-5 | Internal Number: 1-66108-5 | TE Connectivity RoHS : Compliant |
| 14,670 | |
| 61085-1 | TE Connectivity | .156 MNL SOK PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 20 – 14 AWG Operating Voltage: 600 VAC Tin (Sn) Socket 20 – 14 AWG | Connector Contact | Part Number: 61085-1 | Internal Number: 61085-1 | TE Connectivity RoHS : Compliant |
| 5,324 | ||
| 141085-2 | TE Connectivity | TERMINAL TAB FASTON PIDG 6,35 Quick Disconnect Terminal Type: Tab Insulation Option: Partially Insulated Wire Size: 11 – 10 AWG Wire Size: 4 – 6 mm² Wire Size: 8226 – 12066 CMA Tab Partially Insulated 11 – 10 AWG 4 – 6 mm² | Quick Disconnect | Part Number: 141085-2 | Internal Number: 141085-2 | Alias Number: 475376-000 | TE Connectivity RoHS : Compliant |
| 3,155 | ||
| 2108504-1 | TE Connectivity | 2.5 SDL 18P PLUG HSG 2ROW Number of Positions: 18 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Mating Retention Type: Latching Feature Std Temp Signal Double Lock Plug | 18 Plug Housing With | Part Number: 2108504-1 | Internal Number: 2108504-1 | TE Connectivity RoHS : Compliant |
| 2,305 | ||
| 1-2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 1-2273108-5 | Internal Number: 1-2273108-5 | TE Connectivity RoHS : Compliant |
| 88 | ||
| 2273108-5 | TE Connectivity | M8 strght plug to M12 strgt socket AA Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 2 m Cable Assembly Length: 6.5 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 2 m 6.5 ft | M8 Ms - M12 Fs Cable Assy Bl | Part Number: 2273108-5 | Internal Number: 2273108-5 | TE Connectivity RoHS : Compliant |
| 1 | ||
 Vyrian | DS1085LZ-25+ | Analog Devices Inc | Clock Generator, 66MHz, CMOS, PDSO8 RoHS : Compliant | 9,834 | ||
| LD1085D2T33R | STMicroelectronics | RoHS : Compliant | 9,540 | |||
| LT1085CT-3-3-PBF | Analog Devices Inc | 9,042 | ||||
| PMP10852B | Texas Instruments | 7,657 | ||||
| LT1085IT-12-PBF | Analog Devices Inc | 7,107 | ||||
| LD1085D2T80 | STMicroelectronics | 6,812 | ||||
| DC1085A | Analog Devices Inc | 6,684 | ||||
| LD1085D2T25 | STMicroelectronics | RoHS : Compliant | 6,511 | |||
| LD1085D2T18R | STMicroelectronics | Fixed Positive LDO Regulator, 1.8V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Compliant | 4,797 | |||
LD1085DT15R | STMicroelectronics | Fixed Positive LDO Regulator, 1.5V, 1.5V Dropout, BIPolar, PSSO2 RoHS : Compliant | 4,713 | |||
| LD1085D2T33TR | STMicroelectronics | RoHS : Compliant | 4,477 | |||
| 101085 | Micron Technology, Inc | 4,240 | ||||
| MAX1085BCSA-T | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant | 737 | |||
| 46-01-08-500-05 | Grayhill Inc | Pushbutton Switch, DPDT, Momentary, Screw Terminal, Panel Mount RoHS : Compliant | 517 | |||
| MAX1085ACSA-T | Maxim Integrated Products | ADC, Successive Approximation, 10-Bit, 1 Func, 1 Channel, Serial Access, BICMOS, PDSO8 RoHS : Not Compliant | 361 | |||
 Waytek, Inc. | 12110853-L | Aptiv PLC | Metri-Pack 280 Tangless Female Terminal 12-10 Ga Loose Piece |
| 5,893 | |
 Win Source Electronics | LM1085ISX-ADJ | Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK RoHS : Not Compliant |
| 31,500 | |
| LM1085ISX-ADJ/NOPB | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 28,720 | ||
| LM1085IS-ADJ/NOPB | Texas Instruments | IC REG LDO ADJ 3A DDPAK RoHS : Compliant |
| 28,480 | ||
| ADM1085AKSZ | Analog Devices Inc | Processor Supervisor 0.6V 1 Active High/Open Drain 6-Pin SC-70 Reel |
| 15,000 | ||
| ADM1085AKS-REEL7 | Analog Devices Inc | Volt Supervisor Sequencer 0V to 22V 6-Pin SC-70 T/R RoHS : Not Compliant |
| 13,630 | ||
| TPS61085PW | Texas Instruments | IC REG BOOST ADJ 2A 8TSSOP RoHS : Compliant |
| 13,446 | ||
| LM1085ISX-5.0/NOPB | Texas Instruments | IC REG LDO 5V 3A DDPAK RoHS : Compliant |
| 9,350 | ||
| LM1085IS-3.3 | Texas Instruments | IC REG LDO 3.3V 3A DDPAK RoHS : Not Compliant |
| 8,810 | ||
| LM1085RS-ADJ | HTC Korea |
| 5,273 | |||
| 52207-1085 | Molex | 1.00mm (.039") Pitch FFC/FPC Connector, SMT, Right Angle, ZIF, Top Contact StyleReceptacle, 10 Circuits, Lead-free, High Barrier Packaging RoHS : Compliant |
| 3,610 | ||
| LD1085D2M33R | STMicroelectronics | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 2,819 | ||
| LM1085IS-ADJ | Texas Instruments | LM1085 3A Low Dropout Positive Regulators | IC REG LIN POS ADJ 3A DDPAK RoHS : Not Compliant |
| 1,500 | ||
| TPS61085DGKT | Texas Instruments | IC REG BOOST ADJ 2A 8VSSOP RoHS : Compliant |
| 1,293 | ||
| LM1085IS-12/NOPB | Texas Instruments | LM1085 3A Low Dropout Positive Regulators RoHS : Compliant |
| 1,230 | ||
| LT1085CM-3.3#TRPBF | Linear Technology | IC REG LDO 3.3V 3A D2PAK RoHS : Compliant |
| 1,027 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand