103L-11-AL4-R Price, nhà phân phối, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to TNC Male Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly N male to TNC male low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 48 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1038-48 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C1038-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1038-48 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 48 inch length using LMR-240 coax.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

3,850

PE3C1038/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1038/HS-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1038/HS-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1038/HS-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with heatshrink.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

3,850

PE3C10379-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male to SMA male low loss cable 24 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10379-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10379-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to SMA plug cable assembly PE3C10379-24 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10379-24 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.

1 : $130.99
25 : $125.75
50 : $121.82
100 : $119.2

217

PE3W06410-36

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SSMC Plug Cable 36 Inch Length Using RG196 Coax., Radio frequency assembly SMA male to SSMC plug cable 36 inch length using RG196 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC plug cable 36 inch length using RG196 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMC cable connection on the other. Our SMA to SSMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SSMC cable is a male to plug coax assembly, PE3W06410-36, can also be known as a SMA plug to SSMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC male cable assembly PE3W06410-36 is built with RG196 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMA male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06410-36 can also be used in the other direction and will be SSMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC plug cable 36 inch length using RG196 coax.

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

PE3C10354/WP

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.

PE3C10351-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low PIM Cable 60 Inch Length Using TCOM-400 Coax With Times Microwave Components., Radio frequency assembly N male to N male low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male low PIM cable 60 inch length using TCOM-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM a type N to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10351-60 can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10351-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Type N plug to type N plug cable assembly PE3C10351-60 is built with TCOM-400 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $209.99
25 : $201.59
50 : $195.29
100 : $191.09

PE3C10313/HS-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 10-32 Male to SMA Female Cable 6 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly 10-32 male to SMA female cable 6 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 male to SMA female cable 6 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 10-32 to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 10-32 cable connection on one end and a SMA cable connection on the other. Our 10-32 to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C10313/HS-6 can also be known as a 10-32 plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10313/HS-6 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our 10-32 male to SMA female cable has a maximum VSWR of 1.5:1. 10-32 plug to SMA jack cable assembly PE3C10313/HS-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10313/HS-6 can also be used in the other direction and will be a SMA female to 10-32 male cable assembly if the opposite connectivity is required. 10-32 plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMA cable assembly for quick shipment worldwide. Variations of 10-32 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 to SMA RF cable assembly as per your requirements.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

PE3C10327

Pasternack Enterprises

PE3C10337-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240, RF Cable Type: TCOM-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male to N Male Low PIM Cable 48 Inch Length Using TCOM-240 Coax With Times Microwave Components., Radio frequency assembly 7/16 DIN male to N male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 7/16 DIN male to N male low PIM cable 48 inch length using TCOM-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM a 7/16 DIN to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10337-48 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10337-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. 7/16 DIN plug to type N plug cable assembly PE3C10337-48 is built with TCOM-240 which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10337-48 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements.

1 : $171.99
25 : $165.11
50 : $159.95
100 : $156.51

PE3C10358-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Fire Rated 4.3-10 Male to 7/16 DIN Male Low PIM Cable 36 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to 7/16 DIN male low PIM cable 36 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 4.3-10 to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10358-36 can also be known as a low PIM 4.3-10 plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10358-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. 4.3-10 plug to 7/16 DIN plug cable assembly PE3C10358-36 is built with TCOM-400-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10358-36 can also be used in the other direction and will be 7/16 DIN male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $216.99
25 : $208.31
50 : $201.8
100 : $197.46

PE3C10369-180

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 180 Inch Length Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 7/16 DIN male to 7/16 DIN male low PIM cable 180 inch length using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM a 7/16 DIN to a 7/16 DIN cable assembly has male gender on end 1 and male on end 2. PE3C10369-180 can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10369-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C10369-180 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements.

1 : $690.99
25 : $663.35
50 : $642.62
100 : $628.8

PE3C10372

Pasternack Enterprises

Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600-FR, RF Cable Type: TCOM-600-FR, RF Cable Impedance: 50 Ohm. Fire Rated 4.3-10 Male to N Male Low PIM Cable Using TCOM-600-FR Coax With Times Microwave Components., Radio frequency assembly fire rated 4.3-10 male to N male low PIM cable using TCOM-600-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The fire rated 4.3-10 male to N male low PIM cable using TCOM-600-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10372 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10372 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10372 is built with TCOM-600-FR which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10372 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements.

PE3C10382-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-195, RF Cable Type: TCOM-195, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using TCOM-195 Coax With Times Microwave Components., Radio frequency assembly N male right angle to TNC male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male low loss cable 48 inch length using TCOM-195 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle a type N to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10382-48 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10382-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. Type N plug to TNC plug cable assembly PE3C10382-48 is built with TCOM-195 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10382-48 can also be used in the other direction and will be TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements.

1 : $113.99
25 : $109.43
50 : $106.01
100 : $103.73

PE3C10388-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TCOM-195-FR, RF Cable Type: TCOM-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-195-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-195-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-195-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10388-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10388-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. TNC plug to TNC plug cable assembly PE3C10388-60 is built with TCOM-195-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements.

1 : $117.99
25 : $113.27
50 : $109.73
100 : $107.37

PE3W10305LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using PE-C100-LSZH Coax, LF Solder. PE3W10305LF is a SMA male right angle to SMA male cable using PE-C100-LSZH coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10305LF SMA male right angle to SMA male cable assembly is constructed with PE-C100-LSZH coax.

Teledyne HiRel

M38510/30107BFA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 4-BIT
RoHS : Not Compliant

M38510/31602BEA

Teledyne HiRel

LATCH, RS, 4-BIT
RoHS : Not Compliant

M38510/34002B2A

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

M38510/34201BEA

Teledyne HiRel

ADDER, 4-BIT FULL
RoHS : Not Compliant

M38510/34602BRA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/10301BGA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL
RoHS : Not Compliant

M38510/30301BCA

Teledyne HiRel

NOR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/30903BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

M38510/31002BDA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

M38510/31506BEA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

M38510/33202BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33908BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, DUAL 4-INPUT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/34604BSA

Teledyne HiRel

LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/35101BFA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/10103BCA

Teledyne HiRel

OP AMP, GENERAL PURPOSE
RoHS : Not Compliant

Venkel Ltd.

CR0805-10W-103JT

VENKEL LTD

Chip Resistor;0805;1/10W;10K;�5%
RoHS : Compliant

121,500

C0201X5R500-103KNP

VENKEL LTD

Chip Capacitor;0201;X5R;50V;0.01uF;�10%
RoHS : Compliant

45,000

C0603X7R500-103JGP

VENKEL LTD

Chip Capacitor;0603;X7R;50V;0.01uF;�5%;Au
RoHS : Compliant

C0603X7R500-103MNP

VENKEL LTD

Chip Capacitor;0603;X7R;50V;0.01uF;�20%
RoHS : Compliant

C0805X7R500-103JNE

VENKEL LTD

Chip Capacitor;0805;X7R;50V;0.01uF;�5%
RoHS : Compliant

MELFC0102-UC-1103FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;110K;�1%
RoHS : Compliant

MELFC0102-YC-9103FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/3W;�50PPM;910K;�1%
RoHS : Compliant

MELFC0204-ZK-9103FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�100PPM;910K;�1%
RoHS : Compliant

MELFC0207-VE-2103FT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;210K;�1%
RoHS : Compliant

UPTF2512-2W-N-1103AT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;110K ;�0.05%
RoHS : Compliant

PWCR0805-RK-1103DT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;110K;�0.5%
RoHS : Compliant

PWCR0805-VK-9103DT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;910K;�0.5%
RoHS : Compliant

PWCR2010-XK-9103DT

VENKEL LTD

Pulse Withstanding CR;2010;1W;�100PPM;910K;�0.5%
RoHS : Compliant

CR2512-1W-9103FT

VENKEL LTD

Chip Resistor;2512;1W;910K;�1%
RoHS : Compliant

CRG0402-P-2103FT

VENKEL LTD

RoHS 10/10 Green CR;0402;1/16W;210K ;�1%
RoHS : Compliant

Win Source Electronics

NTCG103JF103FT1

TDK Corporation

NTC THERMISTOR 10K OHM 1% 0402
RoHS : Compliant

13,220 : $0.0227
9,845 : $0.0254
7,635 : $0.0262
5,540 : $0.0271
3,575 : $0.028
1,470 : $0.0341

260,000

NTCG103JF103FT1S

TDK Corporation

THERMISTOR NTC 10KOHM 3380K 0402 / NTC Thermistor 10k 0402 (1005 Metric)
RoHS : Compliant

12,770 : $0.0235
9,545 : $0.0262
7,385 : $0.0271
5,360 : $0.028
3,465 : $0.0289
1,425 : $0.0352

260,000

BSH103BKR

Nexperia

BSH103BK - 30 V, N-CHANNEL TRENC
RoHS : Compliant

3,990 : $0.0752
3,200 : $0.0782
2,465 : $0.0813
1,720 : $0.0874
1,110 : $0.0904
520 : $0.0965

112,000

STM8S103K3T6C

STMicroelectronics

IC MCU 8BIT 8KB FLASH 32LQFP / MCU 8-bit STM8 CISC 8KB Flash 3.3V/5V 32-Pin LQFP Tray
RoHS : Compliant

450 : $0.671
360 : $0.6982
280 : $0.7255
195 : $0.7801
125 : $0.8073
60 : $0.8619

45,944

B57703M0103G040

TDK Electronics

THERM NTC 10KOHM 3988K RING LUG / NTC Thermistor 10k Ring Lug
RoHS : Compliant

270 : $1.1228
200 : $1.2523
155 : $1.2955
115 : $1.3387
75 : $1.3819
30 : $1.6841

30,000

STM32F103RGT6

STMicroelectronics

MCU 32-bit ARM Cortex M3 RISC 1MB Flash 2.5V/3.3V 64-Pin LQFP Tray / IC MCU 32BIT 1MB FLASH 64LQFP
RoHS : Compliant

57 : $5.3546
42 : $5.9724
33 : $6.1783
24 : $6.3843
16 : $6.5902
7 : $8.0318

30,000

GRM188R71C103KA01D

Murata Manufacturing Co Ltd

CAP CER 10000PF 16V X7R 0603
RoHS : Compliant

7,715 : $0.0436
5,775 : $0.0485
4,465 : $0.0502
3,240 : $0.0519
2,095 : $0.0535
860 : $0.0653

25,700

MAX6103EUR

Maxim Integrated Products

VOLTAGE REFERENCE
RoHS : Not Compliant

325 : $1.0432
245 : $1.1636
190 : $1.2037
140 : $1.2438
90 : $1.2839
40 : $1.5648

22,211

B82422A1103K100

TDK Electronics

Inductor RF Molded Wirewound 10uH 10% 1MHz 27Q-Factor Ferrite 0.18A 1.6Ohm DCR 1210 Automotive T/R / FIXED IND 10UH 180MA 1.6 OHM SMD
RoHS : Compliant

2,110 : $0.1424
1,575 : $0.1588
1,220 : $0.1643
885 : $0.1697
575 : $0.1752
235 : $0.2135

18,800

LM3103MHX

Texas Instruments

SIMPLE SWITCHER® Synchronous 1MHz 0.75A Step-Down Voltage Regulator
RoHS : Not Compliant

87 : $3.4532
65 : $3.8516
51 : $3.9844
37 : $4.1172
24 : $4.25
10 : $5.1797

10,000

GRM155R71C103KA01D

Murata Manufacturing Co Ltd

CAP CER 10000PF 16V X7R 0402
RoHS : Compliant

24,795 : $0.0121
18,520 : $0.0135
14,290 : $0.014
10,345 : $0.0145
6,715 : $0.0149
2,750 : $0.0182

8,000

X9C103SIT1

Intersil Corporation

IC XDCP 100-TAP 10K EE 8-SOIC / Digital Potentiometer 10kOhm 100POS Non-Volatile Linear 8-Pin SOIC T/R
RoHS : Not Compliant

90 : $3.7672
67 : $4.202
52 : $4.3468
38 : $4.4918
25 : $4.6367
10 : $5.6508

6,850

5103308-1

TE Connectivity

CONN HEADER LOPRO STR 10POS GOLD
RoHS : Compliant

440 : $0.6865
330 : $0.7658
255 : $0.7922
185 : $0.8186
120 : $0.845
50 : $1.0298

5,250

AOZ3103DI

Alpha & Omega Semiconductor

IC REG BUCK ADJ 3A SYNC 8DFN
RoHS : Compliant

690 : $0.5627
555 : $0.586
425 : $0.6093
300 : $0.6571
195 : $0.6804
90 : $0.727

4,000

MJ11032G

STMicroelectronics

TRANS NPN DARL 120V 50A TO3

32 : $9.6222
24 : $10.7324
19 : $11.1025
14 : $11.4726
9 : $11.8427
4 : $14.4332

1,850

103L-11-AL4-R nhà phân phối

Link URL