| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty.
BuyNow |
Chip-Germany GmbH | C40S-0903AA300 1027937
| Sicmer | | | 1
 |
C40E-0903AG300 1027959
| Sicmer | | | 1
|
ECCO | 351-1027-000
| ITT Interconnect Solutions | | | 747
 |
3511027000
| ITT Interconnect Solutions | | | 747
|
KT1027K
| SL Power Electronics | | | 64
|
Pasternack Enterprises US | PE3C10273-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum BNC Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to TNC male low loss cable 12 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our low loss a BNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10273-12 can also be known as a low loss BNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10273-12 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to TNC plug cable assembly PE3C10273-12 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10273-12 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $81.39
10 : $79.76
25 : $78.13
100 : $76.51
|
| 190
|
PE3C10270
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-75-DB, RF Cable Type: LMR-400-75-DB, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm N Male Low Loss Cable Using 75 Ohm LMR-400-75-DB Coax with Times Microwave Components., Radio frequency assembly 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 75 Ohm N male to 75 Ohm N male low loss cable using 75 Ohm LMR-400-75-DB coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same business day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assembly has male gender on end 1 and male on end 2. PE3C10270 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and Foam PE dielectric type. Our PE3C10270 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The RF cable has an in-series connection. Type N plug to type N plug cable assembly PE3C10270 is built with LMR-400-75-DB which is a coax type. The Pasternack N cable assembly is manufactured with type N to N type cable connectors, has a 75 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal N to N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | | 122
|
PE3C10279-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum BNC Male to N Male Low Loss Cable 24 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to N male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to N male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss a BNC to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10279-24 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10279-24 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to type N cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10279-24 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $72.79
10 : $71.33
25 : $69.88
100 : $68.42
|
| 101
|
PE3C10273-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum BNC Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to TNC male low loss cable 36 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to TNC male low loss cable 36 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a TNC cable connection on the other. Our low loss a BNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10273-36 can also be known as a low loss BNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10273-36 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to TNC plug cable assembly PE3C10273-36 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10273-36 can also be used in the other direction and will be TNC male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to TNC cable assembly for quick shipment worldwide. Variations of BNC and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $93.09
10 : $91.23
25 : $89.37
100 : $87.5
|
| 63
|
PEANRBD1027
| Pasternack Enterprises | Key Specifications. Antenna Type Rubber Duck Polarization Vertical Minimum Frequency 136 MHz Maximum Frequency 174 MHz Connector Series MOTO Impedance 50 Ohm Maximum Input VSWR 1.5:1. 136-174 MHz Rubber Duck Antenna, 1.8 dBi gain, MOTO Connector, Vertical Polarization. Vertical polarized antenna PEANRBD1027 from Pasternack is part of our extensive in-stock omni directional antennas that ship the same day from our ISO 9001:2015 certified facility. The antenna with 136 to 174 MHz frequency range has a maximum input VSWR of 1.5:1. This omni directional antenna has MOTO connector, This antenna has a black radome made of TPE, an overall length of 5.90 in, width of 0.50 in, and weighs 0.022 lbs. Pasternack’s PEANRBD1027 is a single band antenna operating from 136 to 174 MHz with 1.8 dBi gain, Pasternack's experts are on hand to assist you with any inquiries. Order this PEANRBD1027 antenna 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping,. | 1 : $16.09
25 : $15.29
50 : $14.48
100 : $13.84
|
| 59
|
PE3C10271-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-LLPX, RF Cable Type: LMR-400-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum BNC Male to N Male Low Loss Cable 48 Inch Length Using LMR-400-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to N male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to N male low loss cable 48 inch length using LMR-400-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a type N cable connection on the other. Our low loss a BNC to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10271-48 can also be known as a low loss BNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE (LD) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10271-48 RF cable has a Fluoropolymer jacket of 0.370-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. BNC plug to type N plug cable assembly PE3C10271-48 is built with LMR-400-LLPX which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10271-48 can also be used in the other direction and will be type N male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $109.99
10 : $107.79
25 : $105.59
100 : $103.39
|
| 47
|
PE1V31027
| Pasternack Enterprises | | 1 : $791.99
10 : $760.31
25 : $728.63
100 : $696.95
|
| 5
|
PE87FL1027
| Pasternack Enterprises | Key Specifications, Connector-In Series: SMA, Connector-In Gender: Female, Connector-Out Series: SMA, Connector-Out Gender: Female, Bandpass Min Frequency: 1.88 GHz, Bandpass Max Frequency: 1.92 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 1 dB, Maximum Power: 50 Watts. Bandpass Filter with SMA Female Connectors Operating from 1.88 GHz to 1.92 GHz with a 55 MHz Passband Bandwidth. Band pass filter PE87FL1027 from Pasternack is part of our extensive in-stock RF components for sale. Our band pass filter is manufactured with SMA connectors that are female. This band pass filter for has a maximum insertion loss of 1 dB and a maximum power of 50 watts. Our PE87FL1027 is a band pass filter with a 50-ohm impedance and is a great option for wireless communication, test instrumentation, and antenna testing applications. This band pass filter has a passband frequency ranging from 1.88 GHz to 1.92 GHz. Our high-quality filter has a 1.25:1 typical passband VSWR. Our high-quality filter’s typical passband VSWR is 1.25:1 and its maximum passband VSWR is 1.3:1. This radio frequency filter has a lower stopband rejection of 60 dB(min) and an upper stopband rejection of 60 dB(min). The Pasternack PE87FL1027 RF band pass filter offers a maximum passband ripple of 0.5 dB and a typical passband ripple of 0.4 dB. The PE87FL1027 band pass filter from Pasternack operates at temperatures ranging from -25 to 70 deg C. This radio frequency filter has the lower stop band from 1.83 GHz and the upper stop band to 1.97 GHz. This cavity band pass filter’s body is made of aluminum and has a grey paint finish. Our band pass filter has dimensions of 3.47 inches long, 1.02 inches wide, and 2.36 inches high. The PE87FL1027 band pass filter is one of over 40,000 RF, microwave, and millimeter wave components supplied by Pasternack. Our band pass filter can be bought and shipped worldwide the same day as our other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality radio frequency filters that meet your requirements. | 1 : $823.99
5 : $807.51
10 : $791.03
25 : $774.55
|
| 1
|
PE3W10271LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to Mini UHF Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W10271LF/HS is a N male to Mini UHF male cable using RG58 coax. This Pasternack N male to Mini UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male N to male Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10271LF/HS N male to Mini UHF male cable assembly is constructed with RG58 coax. | | 0
|
PE3C1027LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Black FAKRA Jack Right Angle to FAKRA Jack Right Angle Cable Using RG174 Coax, LF Solder. PE3C1027LF is a FAKRA jack right angle to FAKRA jack right angle cable using RG174 coax. This Pasternack FAKRA jack right angle to FAKRA jack right angle cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. FAKRA right angle to FAKRA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA right angle to jack FAKRA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1027LF FAKRA jack right angle to FAKRA jack right angle cable assembly is constructed with RG174 coax. | | 0
|
PE3W10278LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 10-32 Male Cable Using RG174 Coax, LF Solder. PE3W10278LF is a 1.0/2.3 jack bulkhead to 10-32 male cable using RG174 coax. This Pasternack 1.0/2.3 jack bulkhead to 10-32 male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10-32 for connector 2. Our jack 1.0/2.3 bulkhead to male 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10278LF 1.0/2.3 jack bulkhead to 10-32 male cable assembly is constructed with RG174 coax. | | 0
|
PE3W21027
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to BNC Female Bulkhead Cable Using RG174 Coax. PE3W21027 is a SMA male to BNC female bulkhead cable using RG174 coax. This Pasternack SMA male to BNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm BNC for connector 2. Our male SMA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21027 SMA male to BNC female bulkhead cable assembly is constructed with RG174 coax. | | 0
|
PE3W01027
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm N Male to 75 Ohm F Male Cable Using 75 Ohm RG187 Coax. PE3W01027 is a N male to F male cable using RG187 coax. This Pasternack N male to F male cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm F for connector 2. Our male N to male F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W01027 N male to F male cable assembly is constructed with RG187 coax. | | 0
|
PE3W10270
| Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 2.4mm Male to SMA Male Cable Using RG405 Coax. PE3W10270 is a 2.4mm male to SMA male cable using RG405 coax. This Pasternack 2.4mm male to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our male 2.4mm to male SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10270 2.4mm male to SMA male cable assembly is constructed with RG405 coax. | | 0
|
PE3W10272LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to Mini UHF Female Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W10272LF/HS is a N male to Mini UHF female cable using RG58 coax. This Pasternack N male to Mini UHF female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm Mini UHF for connector 2. Our male N to female Mini UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10272LF/HS N male to Mini UHF female cable assembly is constructed with RG58 coax. | | 0
|
Venkel Ltd. | CRN10-2-750JT
| VENKEL LTD | Chip Resistor Array;CRN10;2;75R;�5%;Convex
RoHS : Compliant | | 0
|
Waytek, Inc. | AT11-027-0405
| Amphenol Sine Systems | Amphenol Sine Systems AT11-027-0405 contact removal tool is a black terminal removal tool for size 4, 4 Ga. contacts. Comparable to 0411-027-0405, it is compatible with Amphenol AHDP/AHDM and Deutsch HDP/HDM connector families. | | 244
|
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand