 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
1000-8000-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Avnet Americas | WSR3R1000FEA | Vishay Intertechnologies | SMD Current Sense Resistor, 0.1 ohm, WSR Series, 4527 [11470 Metric], 3 W, ? 1%, Metal Strip - Tape and Reel (Alt: WSR3R1000FEA) RoHS : Compliant |
| 28,500 | |
| XPGEWT-01-0000-00000BS5E | Cree, Inc. | XLAMP XP-G GEN 4 LIGHT EMITTING DIODE WH - Tape and Reel (Alt: XPGEWT-01-0000-00000BS5E) RoHS : Compliant |
| 13,000 | ||
| 10104111-0001LF | Amphenol Corporation | - Tape and Reel (Alt: 10104111-0001LF) RoHS : Compliant |
| 10,000 | ||
| 10129383-910001ALF | Amphenol Corporation | - Tape and Reel (Alt: 10129383-910001ALF) RoHS : Compliant |
| 5,180 | ||
| 225-1011-000 | ITT Interconnect Solutions | - Bulk (Alt: 225-1011-000) RoHS : Compliant |
| 5,000 | ||
| PR01000104300JR500 | Vishay Intertechnologies | - Tape and Reel (Alt: PR01000104300JR500) RoHS : Compliant |
| 5,000 | ||
| PAC100001008FA1000 | Vishay Intertechnologies | - Ammo Pack (Alt: PAC100001008FA1000) RoHS : Compliant |
| 2,000 | ||
| ACASN1000S1000P1AT | Vishay Intertechnologies | - Tape and Reel (Alt: ACASN1000S1000P1AT) RoHS : Compliant |
| 2,000 | ||
| RN55C1000FRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RN55C1000FRE6) RoHS : Not Compliant |
| 2,000 | ||
| 20021511-00006T4LF | Amphenol Corporation | - Rail/Tube (Alt: 20021511-00006T4LF) RoHS : Compliant |
| 1,755 | ||
| PR01000101509JA100 | Vishay Intertechnologies | - Ammo Pack (Alt: PR01000101509JA100) RoHS : Compliant |
| 1,000 | ||
| XPEBBL-L1-0000-00301 | Cree, Inc. | LED Uni-Color Blue 45.7lm Chip LED 2-Pin SMD T/R - Bag (Alt: XPEBBL-L1-0000-00301) RoHS : Not Compliant |
| 1,000 | ||
| XPEBPR-L1-0000-00D01 | Cree, Inc. | LED Single Chip Photo Red 1000mA 2-Pin SMD T/R - Tape and Reel (Alt: XPEBPR-L1-0000-00D01) RoHS : Compliant |
| 1,000 | ||
| Y14880R01000D0W | VPG Foil Resistors | - Waffle Pack (Alt: Y14880R01000D0W) RoHS : Not Compliant |
| 39 | ||
| MM-352-051-000-4100 | Molex | I/O Connector, Backshell, Cable Mount, Straight, AirBorn M Series - Bulk (Alt: MM-352-051-000-4100) RoHS : Compliant |
| 7 | ||
 Newark | 1000A 0101000 | Belden Inc | 2 #16 Pvc Fs Pvc; |Belden 1000A 0101000 RoHS : Compliant |
| 4,000 | |
| T2210002010-001 | TE Connectivity | Heavy Duty Contact, Socket, Crimp; |Te Connectivity T2210002010-001 RoHS : Compliant |
| 4,000 | ||
| 1000 | Klein Tools Inc | Multi-Purpose 6-In-1 Tool, 22-8/26-10Awg; |Klein Tools 1000 (Alternate Part Number: 4010886660072 RoHS : Not Compliant |
| 1,957 | ||
| 3.14.100.001/0000 | RAFI GmbH & Co Kg | Switch, Spst-No, 0.1A, 35V, Tht; |Rafi 3.14.100.001/0000 RoHS : Compliant |
| 1,874 | ||
| ESTA002NN00310001000 | TE Connectivity | Circular Connector, Plug, 12Pos, Cable; |Te Connectivity Intercontec ESTA002NN00310001000 RoHS : Compliant |
| 81 | ||
| T4110002031-000 | TE Connectivity | Sensor Connector, M12, Rcpt, 3Pos, Cable; |Te Connectivity T4110002031-000 RoHS : Compliant |
| 64 | ||
| EKUA001NN00310001000 | TE Connectivity | Circular Conn, Rcpt, 12Pos, Cable; Product Range:-; Circular Connector Shell Style:Cable Mount Receptacle; No. Of Contacts:12Contacts; Circular Contact Type:Crimp Pin - Contacts Not Supplied; Coupling Style:-; Contact Material:- Rohs Compliant: Yes RoHS : Compliant |
| 58 | ||
| ESTB001NN00310001000 | TE Connectivity | Circular Conn, Plug, 12Pos, Cable; Produ |Te Connectivity Intercontec ESTB001NN00310001000 RoHS : Compliant |
| 30 | ||
| PAC100001009FA1000 | Vishay Intertechnologies | Res Tht, 10R, ±1%, 1W; |Vishay PAC100001009FA1000 RoHS : Compliant |
| 13 | ||
| PAC100001009FA1000 | Vishay Intertechnologies | Res Tht, 10R, ±1%, 1W; |Vishay PAC100001009FA1000 RoHS : Compliant |
| 13 | ||
| 3.14.100.041/0000 | RAFI GmbH & Co Kg | Switch, Key, Spot Illuminated, Red; |Rafi 3.14.100.041/0000 RoHS : Compliant |
| 6 | ||
| T4110002031-000 | TE Connectivity | Sensor Conn, M12, Rcpt, 3Pos, Screw; Product Range:-; Sensor Connector Size:M12; Sensor Connector Gender:Female; No. Of Positions:3 Positions; Sensor Contact Type:Screw Socket; Sensor Connector Mounting:Straight Cable Mount Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
FC2311-0000-1000-L | TE Connectivity | Load Cell, 10V, 1000Lbf, 2Ft, Cable; |Te Connectivity FC2311-0000-1000-L RoHS : Compliant |
| 2 | ||
| 410-0024-2250-10000 | TE Connectivity | Shielding Gasket, Sheet, Silicone; |Kemtron Te Connectivity 410-0024-2250-10000 RoHS : Compliant |
| 2 | ||
| BXN0400E/00-100/0-1000-1 | Micro-Coax | Braided Emi Shield, Nickel, 25.4Mm; |Amphenol Micro-Coax BXN0400E/00-100/0-1000-1 RoHS : Compliant |
| 1 | ||
 RS | 43031-0003 (430310003) | Molex | CONTACT, PIN, 24-20 AWG, MICRO-FIT 3.0, GOLD OVER TIN/BRASS |
| 7,495 | |
| L18D1CNN1-00000-000 (RCL-00011035 | L18D1CNN1-00000-000 | L18D1CNN100000000) | Carling Technologies | ROCKER SWITCH, SP,(ON)-OFF-(ON),2 X 12VDC AMBER LED LAMP, NO ACTUATOR,20A,.250"QC |
| 100 | ||
| 10006.9-AL (10006.9) | OKW Enclosures Inc | ENCLOSURE, ABS, UL LISTED, BLACK, 2.205 IN., 1.22 IN., 0.945 IN., 2 X 12 MM |
| 89 | ||
| L28D1CNN1-00000-000 (RCL-00013507 | L28D1CNN1-00000-000 | L28D1CNN100000000) | Carling Technologies | ROCKER SWITCH;SEALED;L SERIES |
| 20 | ||
| VAB2BV04-6RZ11-000 (RCV-00008436 | VAB2BV04-6RZ11-000 | VAB2BV046RZ11000) | Carling Technologies | SWITCH;ROCKER;DP;ON-NONE-OFF;ILLUM;LED;24VDC;SB RED;BLACK ACT;15A;QC;ON/OFF LGND |
| 14 | ||
| VJD1000B-CZC00-000 (RCV-00003401 | VJD1000B-CZC00-000 | VJD1000BCZC00000) | Carling Technologies | ROCKER SWITCH;SEALED;CONTURA;V-SERIES |
| 10 | ||
| 05110006001 (110006) | Wera Werk Hermann Werner GmbH & Co. KG | 0.8 X 4.0 X 200MM SLOTTED DRIVER FOR SLOTTED SCREWS, KRAFTFORM PLUS,300 SERIES |
| 8 | ||
| V151S001-6ZZ11-000 (RCV-00010894|V151S001-6ZZ11-000|V151S0016ZZ11000) | Carling Technologies | SWITCH, ROCKER, SPST, ON-NONE-OFF, NON-ILLUM, 15A, 250VAC, QC |
| 6 | ||
| VLD1000B-GZC00-000 (RCV-00100790 | VLD1000B-GZC00-000 | VLD1000BGZC00000) | Carling Technologies | ROCKER SWITCH;SEALED;CONTURA;V-SERIES |
| 5 | ||
| 81510000 (815.100.00 OR 815-100-00) | WERMA SIGNALTECHNIK GMBH + CO KG | INDICATOR LIGHT, PERMANENT BEACON, 12-240VAC/DC, PANEL MOUNT, PG29, RED |
| 3 | ||
| 1000 | SICK AG | SAFETY LIGHT CURTAIN ACCESSORIES, SYSTEM PLUG, M12, 5 PIN, DETEC SERIES |
| 2 | ||
| V1B2UJJ4-6A811-000 (RCV-00110750 | V1B2UJJ4-6A811-000 | V1B2UJJ46A811000) | Carling Technologies | ROCKER SWITCH, SEALED, CONTURA, V-SERIES |
| 2 | ||
| 22010000 (220.100.00 OR 220-100-00) | WERMA SIGNALTECHNIK GMBH + CO KG | INDICATOR LIGHT, PERMANENT BEACON, 12-240VAC/DC, RED, BASE MOUNTING |
| 1 | ||
| 1000 | Adafruit Industries | COLORING BOOK - LADYADAS E IS FOR ELECTRONICS |
| 0 | ||
| 1000 | Klein Tools Inc | MULTI-PURPOSE 6-IN-1 TOOL, RED, LEN: 7-3/4" (197 MM),WIRE STRIPPERS/CUTTERS SERIES |
| 0 | ||
 STMicroelectronics | SRK1000 | STMicroelectronics | Adaptive synchronous rectification controller for flyback converter RoHS : Compliant |
| 2,298 | |
STTH10002TV1 | STMicroelectronics | Ultrafast recovery diode RoHS : Compliant |
| 1,189 | ||
TN1625-1000G-TR | STMicroelectronics | 16A standard SCRs RoHS : Compliant |
| 837 | ||
| STTH10002TV2 | STMicroelectronics | Ultrafast recovery diode RoHS : Compliant |
| 784 | ||
| EMIF01-10005W5 | STMicroelectronics | 2-line EMI filter and ESD protection RoHS : Compliant |
| 92 | ||
| BTW67-1000 | STMicroelectronics | 50 A standard SCR Thyristor in RD91 RoHS : Compliant |
| 5 | ||
| FRDMSTBI-NMH1000 | STMicroelectronics | FRDMSTBI-NMH1000 shield board |
| 3 | ||
| EVLSRK1000A-PF | STMicroelectronics | SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET |
| 0 | ||
| EVLSRK1000-DP | STMicroelectronics | SRK1000 adaptive synchronous rectification controller for flyback |
| 0 | ||
| EVLSRK1000-PF | STMicroelectronics | SRK1000 adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET |
| 0 | ||
| EVLSRK1000B-PF | STMicroelectronics | SRK1000B adaptive synchronous rectification controller for flyback |
| 0 | ||
| EVLSRK1000-TO | STMicroelectronics | SRK1000 adaptive synchronous rectification controller for flyback |
| 0 | ||
| EVLSRK1000B-TO | STMicroelectronics | SRK1000B adaptive synchronous rectification controller for flyback |
| 0 | ||
| EVLSRK1000A-TO | STMicroelectronics | SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with STF80N10F7 |
| 0 | ||
| SRK1000ATR | STMicroelectronics | Adaptive synchronous rectification controller for flyback converter RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | DSC1121NI1-100.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 50PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 5,807 | |
| DSC6111CI1B-010.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 10MHz, 50PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-08-02 RoHS : Compliant |
| 4,675 | ||
| DSC6101CI2B-100.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-04-20 RoHS : Compliant |
| 4,675 | ||
| DSC6101CI3B-003.1000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 3.1MHz, 20ppm, 1.8-3.3V, -40 to 85C, 3.2x2.5mm, VDFN, Projected EOL: 2051-09-16 RoHS : Compliant |
| 4,675 | ||
| DSC1101CI5-100.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 10PPM, 2.5-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-03-06 RoHS : Compliant |
| 3,418 | ||
| DSC1121AI2-100.0000T | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 25PPM, 2.5-3.3V, -40 to 85C, 7.0 x 5.0mm, VDFN, Projected EOL: 2051-05-12 RoHS : Compliant |
| 2,405 | ||
| DSC6101BA1B-100.0000 | Microchip Technology Inc | MEMS OSC, LVCMOS, 100MHz, 50PPM, 1.8-3.3V, -40 to 125C, 5.0x3.2mm, VDFN, Projected EOL: 2050-11-17 RoHS : Compliant |
| 2,000 | ||
| VCC1A-F3D-15M2810000TR | Microchip Technology Inc | VCC1A-F3D-15M2810000TR, LDFN, Projected EOL: 2051-08-19 RoHS : Compliant |
| 1,000 | ||
| M1AGL1000-DEV-KIT | Microchip Technology Inc | M1AGL1000 IGLOO Dev. Kit, Projected EOL: |
| 131 | ||
| M1AGL1000V5-CS281I | Microchip Technology Inc | IGLOO FPGA, ARM Cortex-M1, 11KLEs, TFBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 89 | ||
| M1A3P1000-FGG484 | Microchip Technology Inc | ProASIC3 FPGA, ARM Cortex-M1, 11KLEs, PBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 53 | ||
| M1A3P1000-FG484I | Microchip Technology Inc | ProASIC3 FPGA, ARM Cortex-M1, 11KLEs, PBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 22 | ||
| M1AGL1000V2-FG484I | Microchip Technology Inc | IGLOO FPGA, ARM Cortex-M1, 11KLEs, PBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 10 | ||
| AX1000-1FG484I | Microchip Technology Inc | Axcelerator FPGA, 1000K System Gates, PBGA, Projected EOL: 2051-02-04 RoHS : Compliant |
| 8 | ||
| TPG100007-G3 | Microchip Technology Inc | Softlog ICP2(G3)-DS ICSP Secure Production Programmer, Projected EOL: |
| 4 | ||
 Bisco Industries | 850-10-004-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 2,161 | ||
| 850-10-008-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 468 | |||
| 830-10-001-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 400 | |||
| 850-10-002-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 245 | |||
| 800-10-002-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 148 | |||
| 800-10-004-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 104 | |||
| 800-10-003-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 85 | |||
| 852-10-006-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 50 | |||
| 802-10-008-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 47 | |||
| 800-10-007-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 40 | |||
| 802-10-004-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 35 | |||
| 850-10-006-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 14 | |||
| 850-10-003-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 13 | |||
| 1000 | Zierick Manufacturing Corporation | RoHS : Compliant | 8 | |||
| 850-10-005-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 7 | |||
 Rochester Electronics | BTA208X-1000C0/L01,127 | NXP Semiconductors | TO-220F |
| 344 | |
| MSC8256ESAG1000B | NXP Semiconductors | Digital Signal Processor SC3850 Six Core Ethernet, I²C, PCI, RGMII, Serial RapidIO, SGMII, SPI, UART/USART 1GHz 783-BGA Tray RoHS : Compliant |
| 53 | ||
| MSC8256TAG1000B | NXP Semiconductors | Digital Signal Processor SC3850 Six Core Ethernet, I²C, PCI, RGMII, Serial RapidIO, SGMII, SPI, UART/USART 1GHz 783-BGA Tray RoHS : Compliant |
| 146 | ||
| MSC8256SAG1000B | NXP Semiconductors | Digital Signal Processor SC3850 Six Core Ethernet, I²C, PCI, RGMII, Serial RapidIO, SGMII, SPI, UART/USART 1GHz 783-BGA Tray RoHS : Compliant |
| 2,323 | ||
| MWCT1000CFM | NXP Semiconductors | Specialized Power Management Wireless Power Transmitter 32-QFN Tray RoHS : Compliant |
| 50,577 | ||
| 170-0121-000 | Infineon Technologies AG | Semiconductor | 2,200 | |||
| XDP710001XUMA1 | Infineon Technologies AG | Hot Swap 1 Ch 80V 29-QFN T/R RoHS : Compliant |
| 31,940 | ||
LM2854MH-1000 | Texas Instruments | Switching Regulator, Voltage-mode, 4A, 1000kHz Switching Freq-Max, PDSO16 RoHS : Not Compliant |
| 6,967 | ||
| JM38510/00206BCA | Texas Instruments | FLIP-FLOP, JK, SINGLE RoHS : Not Compliant |
| 1,529 | ||
| JM38510/00402BEA | Texas Instruments | NOR GATE, Dual 4-INPUT, W/STROBE RoHS : Not Compliant |
| 1,116 | ||
| CY8CTMG100-00LFXI | Cypress Semiconductor | Specific Microcontroller M8C Touchscreen Controller 512 x 8 I²C, SPI 32-QFN RoHS : Compliant |
| 11,679 | ||
CY8CTST110-00PVXI | Cypress Semiconductor | Specific Microcontroller M8C Touchscreen Controller 512 x 8 I²C, SPI, UART/USART, USB 56-SOP Tube RoHS : Compliant |
| 3,278 | ||
MSC8156ESVT1000B | Freescale Semiconductor | Digital Signal Processor, 32-Bit Size, 0-Ext Bit, CMOS, PBGA783 RoHS : Compliant |
| 15 | ||
| MSC8256ESAG1000B | Freescale Semiconductor | Digital Signal Processor SC3850 Six Core Ethernet, I²C, PCI, RGMII, Serial RapidIO, SGMII, SPI, UART/USART 1GHz 783-BGA Tray RoHS : Compliant |
| 2,006 | ||
SIT8924BIU21-33N-100.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) LVCMOS, LVTTL 100MHz 2.97V ~ 3.63V ±20ppm 4-SMD T/R RoHS : Compliant |
| 38 | ||
 Sager | 850-10-008-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 644 | |
| 858-10-008-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER |
| 0 | ||
| 859-10-006-10-001000 | Mill-Max Mfg Corp | Mill-Max STANDARD PIN HEADER |
| 0 | ||
| 850-10-004-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings HDR 4 POS 1.27mm Solder ST RoHS : Compliant |
| 0 | ||
| 852-10-008-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 858-10-003-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 832-10-002-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 850-10-002-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings 850 Series 2P Single Row Pin Header RoHS : Compliant |
| 0 | ||
| 852-10-006-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings HDR 6 POS 1.27mm Solder ST RoHS : Compliant |
| 0 | ||
| 800-10-006-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 850-10-005-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 858-10-002-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 830-10-009-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| 800-10-002-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings 2P STRAIGHT HEADER RoHS : Compliant |
| 0 | ||
| 802-10-006-10-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
 TME | 1000910000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; male,female; power supply RoHS : Compliant |
| 192 | |
| 1000 | VISATON GmbH & Co KG | Loudspeaker; 60W; 8Ω; 60x60x27mm; 1000÷30000Hz; Sound level: 91dB |
| 21 | ||
| 0010001000100 | ALPS MAYKESTAG GmbH | Drill bit; for metal; Ø: 10mm; L: 265mm; high speed steel; blister |
| 3 | ||
| 008005 10 000 1000 | RECA | Screw; M5; M5x10; Head: cheese head; hex key; HEX 4mm; steel |
| 0 | ||
| 02812 10 000 1000 | RECA | Screw; M2; M2x10; Head: countersunk; Phillips; PH1; DIN 965 |
| 0 | ||
| 039-90451-0000-5/6A-0-1000/1200A | TE Connectivity | Ammeter; on panel; I AC: 0÷1kA,1.2kA; True RMS; Class: 3; 50÷60Hz |
| 0 | ||
| 12832 10 000 1000 | RECA | Screw; M2; M2x10; Head: button; Phillips; PH1; A4 stainless steel |
| 0 | ||
| 12835 10 000 1000 | RECA | Screw; M5; M5x10; Head: button; Phillips; PH2; A4 stainless steel |
| 0 | ||
| 008306 10 000 1000 | RECA | Screw; M6; M6x10; Head: cheese head; hex key; HEX 5mm; steel |
| 0 | ||
| 20833 10 000 1000 | RECA | Screw; M3; M3x10; Head: cheese head; hex key; HEX 2.5mm; steel; none |
| 0 | ||
| 20834 10 000 1000 | RECA | Screw; M4; M4x10; Head: cheese head; hex key; HEX 3mm; steel; none |
| 0 | ||
| 20835 10 000 1000 | RECA | Screw; M5; M5x10; Head: cheese head; hex key; HEX 4mm; steel; none |
| 0 | ||
| 20836 10 000 1000 | RECA | Screw; M6; M6x10; Head: cheese head; hex key; HEX 5mm; steel; none |
| 0 | ||
| 39110 0021000 | Belden Inc | Wire; stranded; Cu; 10AWG; PPO; red; 600V; 305m; 1x10AWG |
| 0 | ||
| 039-70411-0000-1/1,2A-0-1000/1200A | TE Connectivity | Ammeter; on panel; I AC: 0÷1kA,1.2kA; True RMS; Class: 3; 50÷60Hz |
| 0 | ||
 Ameya Holding Limited | XPERDO-L1-0000-00601 | Cree, Inc. | LED RED-ORANGE 700MA SMD RoHS : Compliant | 100,000 | ||
| MAX5491LC01000+T | Analog Devices Inc | Precision-Matched Resistor-Divider in SOT23 RoHS : Compliant | 39,999 | |||
| MAX5491VA10000+T | Analog Devices Inc | Precision-Matched Resistor-Divider in SOT23 RoHS : Compliant | 18,278 | |||
| LTR18EZPF1000 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 15,000 | ||
| MCR006YRTF1000 | ROHM Semiconductor | RoHS : Compliant |
| 13,000 | ||
| SFR01MZPF1000 | ROHM Semiconductor | 抗硫化贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| SDR10EZPD1000 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| KTR10EZPF1000 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 10,000 | ||
| MCR10SEQPF1000 | ROHM Semiconductor | 2012（0805）尺寸 大功率保证型 方形贴片电阻器（符合AEC-Q200标准） RoHS : Compliant |
| 10,000 | ||
| LTR50UZPF1000 | ROHM Semiconductor | High Power Chip Resistors <Wide Terminal Type> RoHS : Compliant |
| 5,000 | ||
| KTR25JZPF1000 | ROHM Semiconductor | High Voltage Resistance Chip Resistors RoHS : Compliant |
| 4,000 | ||
| MCR25SJQPF1000 | ROHM Semiconductor | 3225(1210)尺寸，厚膜大功率贴片电阻器 (AEC-Q200 合格) RoHS : Compliant |
| 4,000 | ||
| MCR25JZHF1000 | ROHM Semiconductor | RoHS : Compliant |
| 3,000 | ||
| X1B000301000200 | Epson Electronics America Inc | RX8900CE UB X1B000301000200 | 2,000 | |||
| LTR100PZPZF1000 | ROHM Semiconductor |
| 300 | |||
 ComSIT USA | XDP710002 | LENOVO | AVAILABLE EU | 3,000 | ||
| BR310R100001 | AVAILABLE EU | 698 | ||||
| QSYS100051100 | DEMSA | AVAILABLE EU | 179 | |||
| 60100045 | Visual Communications Company | AVAILABLE EU | 3,750 | |||
| X1G005141000400 | Seiko Epson Corporation | AVAILABLE EU RoHS : Compliant | 1,322 | |||
| 1003975510000TLF | Amphenol FCi | AVAILABLE EU | 945 | |||
| IN1000S | LEM Holdings SSA | AVAILABLE EU | 150 | |||
| OQ0671510000G | ANYTEK TECHNOLOGY | AVAILABLE EU | 12,737 | |||
| Q13MC3061000300 | Seiko Epson Corporation | AVAILABLE EU RoHS : Compliant | 2,593 | |||
| 60100085A | Visual Communications Company | AVAILABLE EU | 12,000 | |||
| 60100065C | Visual Communications Company | AVAILABLE EU | 3,000 | |||
| 1826100000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU RoHS : Compliant | 2,247 | |||
| 2892610000 | Weidmüller Interface GmbH & Co. KG | AVAILABLE EU | 612 | |||
| 60100068A | Visual Communications Company | AVAILABLE EU | 1,930 | |||
| MEC0252V1000UA99 | SUNON USA | AVAILABLE EU | 92 | |||
ComSIT USA | WSLP0805R1000FEA | Vishay Intertechnologies | POWER METAL STRIP RESISTOR Fixed Resistor, Metal Strip, 0.5W, 0.1ohm, 0.2236V, 1% +/-Tol, 75ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 30,000 | ||
| MKS2C031000B00MA00 | Wima | Electronic Component RoHS : Not Compliant | 24,000 | |||
| RF1351000 | TE Connectivity | POLYSWITCH RESETTABLE DEVICE PTC Resettable Fuse, Surface Mount RoHS : Compliant | 5,515 | |||
| S14100040 | Adolf Wuerth Gmbh & Co Kg | Electronic Component RoHS : Compliant | 5,460 | |||
| 25YXG1000MEFCT810X28 | Rubycon Corporation | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Through Hole Mount RoHS : Compliant | 5,000 | |||
| WSL2010R1000FEA | Vishay Intertechnologies | POWER METAL STRIP RESISTOR Fixed Resistor, Metal Strip, 0.5W, 0.1ohm, 0.2236V, 1% +/-Tol, 75ppm/Cel, Surface Mount, 2010 RoHS : Compliant | 4,000 | |||
| BAT54CAUR1000A1 | PanJit Semiconductor | SURFACE MOUNT SCHOTTKY BARRIER DIODE Rectifier Diode, Schottky, 1 Phase, 2 Element, 0.2A, 30V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
| P1000K | Diotec Semiconductor AG | STANDARD RECOVERY RECTIFIER DIODE Rectifier Diode, 1 Phase, 1 Element, 10A, 800V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
| PR01000101800JA100 | Vishay Intertechnologies | Fixed Resistor, Metal Film, 1W, 180ohm, 350V, 5% +/-Tol, 250ppm/Cel, Through Hole Mount RoHS : Compliant | 2,000 | |||
| MA4061000000MHZ | Seiko Epson Corporation | Quartz Crystal RoHS : Compliant | 2,000 | |||
| 01110005MR | Littelfuse Inc | Fuse Holder Clip Cartridge 10A Surface Mount Ammo RoHS : Compliant | 1,000 | |||
| SCI90531000002 | sci | Electronic Component RoHS : Not Compliant | 650 | |||
| BYM101000E3 | Vishay Intertechnologies | SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 1000V V(RRM), Silicon, DO-213AB RoHS : Not Compliant | 600 | |||
| HCPL2731000E | Avago Technologies | Dual-Channel Low Input Current, High-Gain Optocoupler Logic IC Output Optocoupler, 2-Channel, 2-Element, 3750V Isolation RoHS : Compliant | 316 | |||
| XC2V1000FG456 | AMD Xilinx | Electronic Component RoHS : Not Compliant | 5 | |||
 GLYN GmbH & Co. KG | PJS008-4100-0-VE | Yamaichi Electronics Co Ltd | microSD push/lock Type top mount T&R packaging RoHS : Compliant | 700 | ||
| 451-00001C | Qnity Laird | BL654 - Bluetooth v5 / 802.15.4 / NFC Module (Nord RoHS : Compliant | 47 | |||
| R_PICO-V2K4-A11-0003_46598_V2 | AAEON Technology Inc | PICO-V2K4-A11-0003 (incl. 8GB RAM) Change: Power | 19 | |||
| KAB-51021-1000-0500FK | ES+S | KAB-51021-NN00-LLLLFK ESS | 10 | |||
| PICO-ADN4-A10-0002 | AAEON Technology Inc | PICO.N97.LPDDR58GB.HDMI.LVDS.2LAN. 2COM.4USB.TPM. | 2 | |||
| PICO-V2K4-A11-0003 | AAEON Technology Inc | PICO.V2516.LPDDR4x 8GB.NVMe 64GB.2HDMI.LVDS.2LAN.7 | 2 | |||
| RUT901000000 | Teltonika | INDUSTRIAL CELLULAR ROUTER | 2 | |||
| MIC-B5760-IB411000 | MYIR Tech Limited | Rugged IPC with Rockchip RK3576J Arm Processor 4x | 1 | |||
| GENE-ADP6-A10-0004 | AAEON Technology Inc | 3.5".i3-1220PE.HDMI.2DP.LVDS.eDP.2Lan.8USB.4COM.SA | 1 | |||
| WWSSDEMO43W-DA-11#000 | Winstar Display Co Ltd | Demo Set 4,3" Smart Display RS485 inkl. WL0F00043 | 1 | |||
| RUTC50210000 | Teltonika | 5G POWERHOUSE WITH WI-FI 6 | 1 | |||
| MEC-B5760-CC810000 | MYIR Tech Limited | Rugged IPC with Rockchip RK3576 Arm Processor 4xC | 1 | |||
| EVME101000VDYW*K0 | Emerging Display Technolgies | TFT 10.1" 1920x1200, 950 cd/mý LED, IPS, eDP, PCA | 1 | |||
| COMADNC6-A10-0004 | AAEON Technology Inc | COM Express Type 6 Compact Size with Intel | 1 | |||
 Interstate Connecting Components | S391-10-002-00-911000 | Mill-Max Mfg Corp |
| 10,811 | ||
| 399-10-006-00-310000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 744 | ||
| 851-93-017-10-001000 | Mill-Max Mfg Corp | RoHS : Not Compliant |
| 204 | ||
| 800-10-001-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 18 | ||
| 800-10-002-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 2 | ||
| 850-10-002-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 1 | ||
| 850-10-006-10-001000 | Mill-Max Mfg Corp | RoHS : Compliant |
| 1 | ||
| 100-001B1000 | Glenair Inc | 0 | ||||
| 100-002B1000 | Glenair Inc | EMI/RFI BRAIDED SHIELDING SILVER / COPPER BRIAD | 0 | |||
| T2100062101-000 | TE Connectivity | HK4/2-006-M RoHS : Compliant |
| 0 | ||
| T2210002010-001 | TE Connectivity | SDAF0.5-0.75 RoHS : Compliant | 0 | |||
| 100-001A1000L | Glenair Inc | TUBULAR METAL BRAID TIN COATED COPPER | 0 | |||
| ESB001N00310001000 | TE Connectivity | 615 PLUG RoHS : Compliant | 0 | |||
| OQ1000810000G | Amphenol Anytek | OQ-7.62- 10P GREY CONTACT WI | 0 | |||
| ESTA002NN00310001000 | TE Connectivity | RoHS : Compliant |
| 0 | ||
 PEI Genesis | 120110-0044 | ITT Interconnect Solutions |
| 4,314 | ||
| 105-0810-001 | Johnson Components | RoHS : Compliant |
| 194 | ||
| 17-10002 | Amphenol Corporation |
| 167 | |||
| 2CMA170004R1000 | Amphenol Sine Systems |
| 20 | |||
| 2CMA166494R1000 | Amphenol Sine Systems |
| 5 | |||
| 2CMA166982R1000 | Amphenol Sine Systems |
| 5 | |||
| CPX100-0047-BLK-SP1000 | DSG-Canusa |
| 3 | |||
| CPX100-0094-BLK-SP1000 | DSG-Canusa |
| 0 | |||
| CPX100-0125-BLK-SP1000 | DSG-Canusa |
| 0 | |||
| 225-1011-000 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 10-824810-004 | Amphenol Corporation |
| 0 | |||
| 1000-053-8120 | Amphenol Aerospace |
| 0 | |||
| 109871-0001 | SOURIAU-SUNBANK |
| 0 | |||
| 252-1231-000 | ITT Interconnect Solutions |
| 0 | |||
| 25Z01000-00025 | SOURIAU-SUNBANK |
| 0 | |||
 PUI | 1583A 006U1000 | 10,000 | ||||
| F17102101000 | Vishay Roederstein | RoHS : Compliant | 4,500 | |||
| Y63467 0101000 | 4,350 | |||||
| 5300UE 008U1000 | 2,000 | |||||
| 5500FE 008U1000 | 2,000 | |||||
| 6300FE 008U1000 | 1,000 | |||||
| 5502FE 0081000 | 1,000 | |||||
| 8723 0601000 | 1,000 | |||||
| 43810-0004 | Molex | RoHS : Compliant | 200 | |||
| 109-1000F20 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 160 | ||
| F3T-1000A | 140 | |||||
| 109-1000F13 | Sanyo-Denki Co Ltd | RoHS : Compliant | 132 | |||
| 12.61000 | Geyer Electronic E K | RoHS : Compliant | 49 | |||
| 8760 0601000 | 3 | |||||
| 2306-1000 | 1 | |||||
 Richardson RFPD | MADT-011000-TR1000 | MACOM | RF Detector 5000MHz to 44000MHz 15dBm 16-Pin PQFN RoHS : Compliant |
| 293 | |
| 1000520521000GX | Radiall | RF Cable Assembly RoHS : Compliant | 0 | |||
| CRBV55CX-1000-1000 | Crystek Corporation | Red Box-VCO Oscillators RoHS : Compliant | 0 | |||
| 67010001-000 | TE Connectivity | Linear Ball Bearing Ultra-Precision Gage Head - Li RoHS : Compliant |
| 0 | ||
| RP695-1000-1000-B | Astrodyne TDI Power Supplies & EMI Filters | Compact HI-Current DC Filter For EV Chargers RoHS : Compliant | 0 | |||
| FS1901-0000-1000-G | TE Connectivity | Force LoadCell RoHS : Compliant |
| 0 | ||
| CVCO55CX-1000-1000 | Crystek Corporation | OSCILLATOR VCO RoHS : Compliant | 0 | |||
| VF901727-100.000MHZ-10.00 | CTS Corporation | OSCILLATOR CRYSTAL RoHS : Compliant | 0 | |||
| 21000492 | RECOM Power GmbH | Module DC-DC 48VIN 1-OUT 28V 5.357A 150W 9-Pin Hal RoHS : Compliant |
| 0 | ||
| 134-1000-034 | Cinch Connectivity Solutions | 134-1000-034 RoHS : Compliant | 0 | |||
| 142-1000-033 | Cinch Connectivity Solutions | Connector Accessories Hermetic Seal Feed-Thru Stra RoHS : Compliant |
| 0 | ||
| 1000-1506 | PolyPhaser | EMP/LIGHTNING PROTEC RoHS : Compliant |
| 0 | ||
| 1000-682-5 | PolyPhaser | EMP/LIGHTNING PROTEC |
| 0 | ||
| 100C561FT1000XT250 | Kyocera AVX Components | Porcelain High RF Power Multilayer Capacitor RoHS : Compliant | 0 | |||
| 105-0810-001 | Cinch Connectivity Solutions | Conn Tip Jack F 1 POS ST Panel Mount 1 Port RoHS : Compliant |
| 0 | ||
 Chip 1 Exchange | 02041-00020000 | INSTOCK | 8,570 | |||
| NRC06F1000TRF | NIC Components Corp | INSTOCK RoHS : Compliant | 6,700 | |||
| 36911000000 | Littelfuse Inc | INSTOCK RoHS : Compliant | 4,311 | |||
| 1307951000 | INSTOCK | 4,000 | ||||
| SMM02040C1000FB300 | INSTOCK | 3,750 | ||||
| 195195111-000 | INSTOCK | 1,560 | ||||
| 3128100010000080 | INSTOCK | 1,000 | ||||
| 406-0010-003 | INSTOCK | 839 | ||||
| 5734010000 | INSTOCK | 578 | ||||
| 008289010006113 | Kyocera AVX Components | INSTOCK RoHS : Compliant | 500 | |||
| 031.001053.1000 | INSTOCK | 194 | ||||
| 025-0510-000 | ITT Interconnect Solutions | INSTOCK RoHS : Compliant | 95 | |||
| 1000-0000-5516 | INSTOCK | 44 | ||||
| 120301000- | INSTOCK | 6 | ||||
| 308710-002 | INSTOCK | 3 | ||||
 Avnet Abacus | R46KI310000M1M | KEMET Corporation | Safety Capacitor Metallized PP Radial Box 2 Pin 01 uF 20 X2 Through Hole 275 VAC (Alt: R46KI310000M1M) RoHS : Compliant | 130,000 | ||
| MRS25000C1000FC100 | Vishay Intertechnologies | - Tape and Reel (Alt: MRS25000C1000FC100) RoHS : Compliant | 14,000 | |||
| PR01000101509JA100 | Vishay Intertechnologies | - Tape and Reel (Alt: PR01000101509JA100) RoHS : Compliant | 9,000 | |||
| 800-10-002-10-001101 | PRECI-DIP SSA | Conn Unshrouded Header HDR 2 POS 254mm Solder ST ThruHole Box (Alt: 800-10-002-10-001101) RoHS : Compliant | 6,840 | |||
| T4110002081-000 | TE Connectivity | M12FEMALESTRAIGHTA CODE8PPG9GOLD (Alt: T4110002081-000) RoHS : Compliant | 3,900 | |||
| OQ1012510000G | Amphenol Corporation | Conn PC Board Terminal Block Header 10 POS 35mm RA Through Hole 105A (Alt: OQ1012510000G) RoHS : Compliant | 2,310 | |||
| PR01000101000JA100 | Vishay Intertechnologies | Through Hole Resistor 100 ohm PR01 Series 1 W 5 Axial Leaded 350 V - Tape and Reel (Alt: PR01000101000JA100) RoHS : Compliant | 2,000 | |||
| T4110001041-000 | TE Connectivity | M12FEMALESTRAIGHTA CODE4PPG7GOLD (Alt: T4110001041-000) RoHS : Compliant | 1,200 | |||
| 802-10-004-10-001101 | PRECI-DIP SSA | Conn Unshrouded Header HDR 4 POS 254mm Solder ST ThruHole Box (Alt: 802-10-004-10-001101) RoHS : Compliant | 1,140 | |||
| P78A05-1000 | Bel Fuse | Non Isolated DCDC Converter 1 Output 5 W 5 V 1 A Fixed SIP Through Hole (Alt: P78A05-1000) RoHS : Compliant | 756 | |||
| T4110002051-000 | TE Connectivity | M12FEMALESTRAIGHTA CODE5PPG9GOLD (Alt: T4110002051-000) RoHS : Compliant | 751 | |||
| 551000670 | Molex | IO Connector 6 Contacts Plug IO Solder 55100 Cable Mount (Alt: 551000670) RoHS : Compliant | 500 | |||
| T4010008041-000 | TE Connectivity | (Alt: T4010008041-000) RoHS : Compliant | 350 | |||
| T4110001031-000 | TE Connectivity | Sensor Connector PG746mm M12 Female 3 Positions Screw Socket Straight Cable Mount (Alt: T4110001031-000) RoHS : Compliant | 300 | |||
| MM-352-051-000-4100 | Molex | AirBorn M Series MicroD EMIRFI BackShell Straight Cable Exit Aluminum Shell (Alt: MM-352-051-000-4100) RoHS : Compliant | 5 | |||
Avnet Asia | Z02E4F7L111000 | Amphenol Corporation | Contact Spring Copper Alloy Gold Flash Over Nickel 2mm Height T/R (Alt: Z02E4F7L111000) RoHS : Compliant | 48,000 | ||
| ESR03EZPF1000 | ROHM Semiconductor | (Alt: ESR03EZPF1000) RoHS : Compliant |
| 25,000 | ||
| F0603FA1000V032T | AEM Inc | (Alt: F0603FA1000V032T) RoHS : Compliant | 20,000 | |||
| G846A100011T6HR | Amphenol Corporation | (Alt: G846A100011T6HR) RoHS : Compliant |
| 9,000 | ||
| SIT9375A-A310003E | SiTime Corporation | SCTSIT9375A-A310003E PASSIVE COMPONENT, (Alt: SIT9375A-A310003E) RoHS : Compliant |
| 5,000 | ||
| 145814010000829+ | KYOCERA Corporation | KED145814010000829+ BTB. 5814 10PIN AU P (Alt: 145814010000829+) RoHS : Compliant |
| 5,000 | ||
| X1G004451000800 | Epson Electronics America Inc | (Alt: X1G004451000800) RoHS : Compliant |
| 4,000 | ||
| G88MP10001C1EU | Amphenol Corporation | MICRO POWER PLUS 3.0 R/A (Alt: G88MP10001C1EU) RoHS : Compliant | 3,780 | |||
| ME10002102P1311 | Amphenol Corporation | (Alt: ME10002102P1311) RoHS : Compliant |
| 3,000 | ||
| 10108777-10003CLF | Amphenol Corporation | Connector PCI Express Card Receptacle 164 Positon 1.47mm Card Thickness 1mm Solder Straight Through (Alt: 10108777-10003CLF) RoHS : Compliant | 1,800 | |||
| X1G004451000212 | Epson Electronics America Inc | (Alt: X1G004451000212) RoHS : Compliant |
| 1,250 | ||
| X1G004241000611 | Epson Electronics America Inc | SG3225VAN 400.000000MHZ KJGA (Alt: X1G004241000611) RoHS : Compliant | 200 | |||
| 100-000000245 | AMD | MPU CISC 64-Bit 2.9GHz 8-Core 1140-Pin BGA (Alt: 100-000000245) RoHS : Not Compliant |
| 160 | ||
| 100-000000246 | AMD | MPU CISC 64-Bit 3GHz 6-Core 1140-Pin BGA (Alt: 100-000000246) RoHS : Compliant |
| 160 | ||
| CC4691-000 | TE Connectivity | (Alt: CC4691-000) RoHS : Compliant |
| 4 | ||
 Avnet Silica | BZT52-B5V6S-AU_R1_000A1 | PanJit Semiconductor | (Alt: BZT52-B5V6S-AU_R1_000A1) RoHS : Compliant | 25,000 | ||
| BZX84C12 _R1 _00001 | PanJit Semiconductor | (Alt: BZX84C12_R1_00001) RoHS : Compliant | 24,000 | |||
| ZMM55C6V8 _R1 _10001 | PanJit Semiconductor | (Alt: ZMM55-C6V8_R1_10001) RoHS : Compliant | 22,500 | |||
| ZMM55C15 _R1 _10001 | PanJit Semiconductor | MiniMELF500mW15VZener DiodeSMD 5 (Alt: ZMM55-C15_R1_10001) RoHS : Compliant | 20,000 | |||
| PJE138K-AU_R1_000A1 | PanJit Semiconductor | (Alt: PJE138K-AU_R1_000A1) RoHS : Compliant | 20,000 | |||
| BC849CW _R1 _00001 | PanJit Semiconductor | (Alt: BC849CW_R1_00001) RoHS : Compliant | 18,000 | |||
| MMSZ5228B _R1 _00001 | PanJit Semiconductor | (Alt: MMSZ5228B_R1_00001) RoHS : Compliant | 18,000 | |||
| SMF48A _R1 _00001 | PanJit Semiconductor | SOD 123200WVcl774V 26ATVSSMDUnidir (Alt: SMF48A_R1_00001) RoHS : Compliant | 9,000 | |||
| 1.5SMC47AS_R1_00001 | PanJit Semiconductor | SMC Transient Voltage Suppressor 1500 W (Alt: 1.5SMC47AS_R1_00001) RoHS : Compliant | 8,000 | |||
| KBU8M _B0 _10001 | PanJit Semiconductor | (Alt: KBU8M_B0_10001) RoHS : Compliant | 6,600 | |||
| PJS6417_S1_00001 | PanJit Semiconductor | (Alt: PJS6417_S1_00001) RoHS : Compliant | 3,000 | |||
| XPGDWT-B1-0000-00K2E | Cree, Inc. | XLAMP XPG GEN 3 LIGHT EMITTING DIODE WHITE (Alt: XPGDWT-B1-0000-00K2E) RoHS : Compliant | 2,000 | |||
| 1SMA4745_R1_00001 | PanJit Semiconductor | (Alt: 1SMA4745_R1_00001) RoHS : Compliant | 1,800 | |||
| 1.5SMC68AS_R1_00001 | PanJit Semiconductor | Diode TVS Single UniDir 581V 1500W 2Pin SMC TR (Alt: 1.5SMC68AS_R1_00001) RoHS : Compliant | 1,600 | |||
| RTK9744L23S01000BE | Renesas Electronics Corporation | Evaluation Board R9A07G044L24GBG 32 64bit ARM CortexA55 CortexM33 RZ (Alt: RTK9744L23S01000BE) RoHS : Compliant | 2 | |||
 Braemac Americas-Symmetry | V-AN-0SEX-A-R-100.000MHZ | Abracon Corporation |
| 0 | ||
| AWSCR-10.00CPLA-C47-T4 | Abracon Corporation |
| 0 | |||
| ASDMPALP-100.0000MHZ-LR-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASEMPALV-100.0000MHZ-VR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AST3TQ53-T-10.000MHZ-5-C | Abracon Corporation | XTAL OSC TCXO 10.0000MHZ LVCMOS RoHS : Compliant |
| 0 | ||
| ASVMPAC-100.0000MHZ-VR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-X-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASVMPALP-100.0000MHZ-XJ-PD-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMMLPDBVJS-100.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBVRS-10.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVALCS-100.0000T | Abracon Corporation |
| 0 | |||
AOCJY2A-10.000MHZ-F-SW | Abracon Corporation | XTAL OSC VCOCXO 10.0000MHZ SNWV RoHS : Unknown |
| 0 | ||
AOCJY4B-10.000MHZ-SW | Abracon Corporation | XTAL OSC VCOCXO 10.0000MHZ SNWV RoHS : Unknown |
| 0 | ||
| LE910SV2008T001000 | Telit | LE910-SV V2 MODULE 20.00.008 (Verizon) |
| 0 | ||
| ASDMPALV-100.0000MHZ-XR-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | PR01000101000JA100 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,549 | |
| 1696100001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 1,840 | ||
| 3401-0-00-01-00-00-03-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,500 | ||
| 2111-1-00-01-00-00-07-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 300 | ||
| 231-534/001-000 | WAGO Innovative Connections | IN STOCK SHIP TODAY RoHS : Compliant |
| 55 | ||
| 800-10-002-10-002000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 52 | ||
| 800-10-006-10-002 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| 3410.0031.02 | Schurter Electronic Components | IN STOCK SHIP TODAY RoHS : Compliant |
| 37 | ||
| 800-10-006-10-002000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 32 | ||
| 800-10-005-10-002000 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Compliant |
| 19 | ||
| PAC100001000FA1000 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| 1100-001-000 | Bourns Inc | IN STOCK SHIP TODAY | 5 | |||
| V1000LA80A | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| 1000-500031-000 | IN STOCK SHIP TODAY |
| 1 | |||
| 17-10002 | Conec Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
 EBV Elektronik | BYM11-1000-E3/96 | Vishay Intertechnologies | Standard Recovery Rectifier 1 kV 1 A Single 13 V 30 A DO213 AB MELF2 Pins (Alt: BYM11-1000-E3/96) RoHS : Compliant | 39,000 | ||
| BXCP-65G-11M-K19-3-A1-00-0-3 | Bridgelux Inc | CSP 1919 KSeries (Alt: BXCP-65G-11M-K19-3-A1-00-0-3) RoHS : Compliant | 20,000 | |||
| HCPL-2231-000E | Broadcom Limited | Optocoupler Digital Output 2 Channel 375 kV 5 Mbaud DIP 8 Pins (Alt: HCPL-2231-000E) RoHS : Compliant | 15,950 | |||
| HCNR201-000E | Broadcom Limited | Optocoupler Linear Optocouplers 1 Channel DIP 8 Pins 5 kV (Alt: HCNR201-000E) RoHS : Compliant | 15,288 | |||
| HCPL-0201-000E | Broadcom Limited | Optocoupler LogicOut TotemPoleOUT DCIN 1CH 8Pin SOIC Tube (Alt: HCPL-0201-000E) RoHS : Compliant | 6,700 | |||
| BXCP-18G-11L-K11-3-A1-00-0-3 | Bridgelux Inc | CSP 1111 KSeries (Alt: BXCP-18G-11L-K11-3-A1-00-0-3) RoHS : Compliant | 6,000 | |||
| HCNW2211-000E | Broadcom Limited | Optocoupler Digital Output 1 Channel 5 kV 5 Mbaud DIP 8 Pins (Alt: HCNW2211-000E) RoHS : Compliant | 1,722 | |||
| BXRH-22G1000-B-83 | Bridgelux Inc | V6HD Generation 8 (Alt: BXRH-22G1000-B-83) RoHS : Compliant | 525 | |||
| BXRH-27H1000-G-82 | Bridgelux Inc | LED COB Warm White 2700K 12A Tube (Alt: BXRH-27H1000-G-82) RoHS : Compliant | 420 | |||
| BXRV-DR-1830H-1000-B-13 | Bridgelux Inc | LED Warm White 95 CRI Rating 118W 1150lm 350mA 110 338V 3000K Round with Flat Top (Alt: BXRV-DR-1830H-1000-B-13) RoHS : Compliant | 385 | |||
| BXRV-DR-1830G-1000-B-33 | Bridgelux Inc | Vesta DW 9mm Gen 3 135mm square board (Alt: BXRV-DR-1830G-1000-B-33) RoHS : Compliant | 210 | |||
| BXRC-35G1000-D-82 | Bridgelux Inc | Vero 10D Warm White LED Array (Alt: BXRC-35G1000-D-82) RoHS : Compliant | 200 | |||
| BXRC-30G1000-D-73 | Bridgelux Inc | LED COB Warm White 3000K 700mA Tray (Alt: BXRC-30G1000-D-73) RoHS : Compliant | 200 | |||
| BXEB-L0280Z-30G1000-C-C3 | Bridgelux Inc | Linear LED Module 56 LEDs Screw Mount Tray (Alt: BXEB-L0280Z-30G1000-C-C3) RoHS : Compliant | 200 | |||
| ACSL-6310-00TE | Broadcom Limited | Optocoupler Digital Output 3 Channel 25 kV 15 Mbaud SOIC 16 Pins (Alt: ACSL-6310-00TE) RoHS : Compliant | 100 | |||
 ECCO | 100-0121-000 | ITT Interconnect Solutions |
| 2,629 | ||
| 249-3051-000 | ITT Interconnect Solutions |
| 2,015 | |||
| 10-824810-004 | Amphenol Industrial Operations |
| 523 | |||
| 249-3051-000-MS | ITT Interconnect Solutions |
| 523 | |||
| 011-0631-000 | ITT Interconnect Solutions |
| 242 | |||
| 099-0111-000 | ITT Interconnect Solutions |
| 119 | |||
| 101-0341-000 | ITT Interconnect Solutions |
| 99 | |||
| 4480181000 | ITT Interconnect Solutions | 95 | ||||
| 044-1001-000 | ITT Interconnect Solutions |
| 24 | |||
| CM111-02-1000-024 | ECCO Connectors |
| 22 | |||
| 143-3621-000 | ITT Interconnect Solutions |
| 15 | |||
| 1433661000 | ITT Interconnect Solutions |
| 13 | |||
| CM111-02-1000-036 | ECCO Connectors |
| 11 | |||
| 120110-0044 | ITT Interconnect Solutions |
| 3 | |||
| 351-1041-000 | ITT Interconnect Solutions |
| 1 | |||
 Flip Electronics | L1HL-3590100000000 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 110,000 | |
| NCP171AMX100080TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 45,000 | ||
| L1HL-6590100000000 | Lumileds | Stock, Ship Today RoHS : Compliant |
| 7,000 | ||
| NCL31000MNITWG | onsemi | Stock, Ship Today RoHS : Compliant |
| 5,000 | ||
| MC7447AHX1000NB | NXP Semiconductors | Stock, Ship Today RoHS : Not Compliant | 3,000 | |||
| MC7448HX1000NC | NXP Semiconductors | Stock | 3,000 | |||
| 810001DK-21LFT | Renesas Electronics Corporation | Stock RoHS : Compliant | 2,249 | |||
| MC8640VU1000HE | NXP Semiconductors | Stock RoHS : Compliant | 2,145 | |||
| MC8640VJ1000HE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 2,000 | |||
| MSC8251SAG1000B | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,953 | ||
| MSC8157ETAG1000A | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 1,476 | ||
| MWCT1000CFM | NXP Semiconductors | Stock RoHS : Compliant | 1,233 | |||
| R7S721000VCBG#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 897 | |||
| XLP316LXD1000-22 | Broadcom Limited | Stock, Ship Today |
| 57 | ||
| MSC8156SAG1000B | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 23 | ||
 Master Electronics | 1000 | Klein Tools Inc | Multi-Purpose 6-In-1 Tool RoHS : Compliant |
| 4 | |
| SGE151001000A01000C01000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000160A10000C10000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000150A10000C10000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000440A01000C01000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE-245-0-100001000C-01000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE2450100010000C10000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE2450100010000C1000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000440A1000C1000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000240A10000C10000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE-245-0-100010000C-10000 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE151000280A10000C10000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| SGE2450100001000C01000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| 410-0024-2250-10000 | TE Connectivity | Mon Wire 40 Sh Sil 225x1000x2.4mm Sheet RoHS : Compliant |
| 0 | ||
| SCS25251100010000C | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C100079-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 36 Inch Length Using PE-TC177A Coax., Pasternack’s PE3C100079-36 low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100079-36 can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100079-36 RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.45:1. This PE3C100079-36 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 36-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100079-36 can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 24 | |
| PE3C100020/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MCX Plug Right Angle Cable 36 Inch Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA male to MCX plug right angle cable 36 inch length using RG178 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX plug right angle cable 36 inch length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a right angle MCX cable connection on the other. Our SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3C100020/HS-36 can also be known as a SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100020/HS-36 RF cable has a FEP jacket of 0.072-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our SMA male to right angle MCX plug cable has a maximum VSWR of 1.5:1. SMA plug to MCX male cable assembly PE3C100020/HS-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100020/HS-36 can also be used in the other direction and will be a right angle MCX plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements. |
| 21 | ||
| PE3C100088 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MHF1, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. MHF1 to SMA Male Right Angle Cable Assembly Using O.D. 1.13mm Cable., Pasternack’s PE3C100088 MHF1 to right angle SMA male RF cable assembly is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MHF1 to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MHF1 to SMA cable assembly orders will ship the same business day as well. Pasternack RF cable assembly is built with an MHF1 cable connection on one end and a right angle SMA cable connection on the other. PE3C100088 can also be known as an MHF1 to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.052-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The MHF1 to SMA cable from Pasternack is ideal for applications including external antenna connection (Wi-Fi, Bluetooth, LTE, 5G, and GPS receivers), improving signal strength (embedded systems inside metal enclosures), prototyping and development and IoT and embedded systems (drones and robotics). The minimum bend radius for this cable is 0.157 inches, allowing for a single bend without damaging the cable. Our PE3C100088 RF cable has an FEP jacket of 0.052-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. This cable assembly has a typical propagation velocity of 70%. Our MHF1 to right angle SMA male cable has a maximum VSWR of 1.55:1. This single shielded cable assembly has a tinned copper shield layer. The Pasternack MHF1 cable assembly is manufactured with MHF1 to right angle SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100088 can also be used in the other direction and will be a right angle SMA plug to MHF1 cable assembly if the opposite connectivity is required. This MHF1 to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MHF1 to SMA cable assembly for quick shipment worldwide. Variations of MHF1 and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MHF1 to SMA RF cable assembly as per your requirements. | 20 | |||
| PE3C100071-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Female to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100071-100CM low loss test 2.4mm female to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm female to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100071-100CM can also be known as a low loss test 2.4mm jack to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100071-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm female to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100071-100CM 2.4mm jack to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm jack to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 17 | ||
| PE3C100063-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 24 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100063-24 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100063-24 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100063-24 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100063-24 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 15 | ||
| PE3C100069-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 24 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100069-24 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100069-24 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100069-24 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100069-24 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 15 | ||
| PE3C100083-150CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. 1.85mm Female to 1.85mm Female Low Loss Test Cable 150 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100083-150CM low loss test 1.85mm female to 1.85mm female RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100083-150CM can also be known as a low loss test 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100083-150CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm female to 1.85mm female cable has a maximum VSWR of 1.5:1. This PE3C100083-150CM 1.85mm jack to 1.85mm jack cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 59.06-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm jack to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements. |
| 13 | ||
| PE3C100082 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm. 1.85mm Male to 1.85mm Female Low Loss Test Cable Using PE-TC142A Coax., Pasternack’s PE3C100082 low loss test 1.85mm male to 1.85mm female RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100082 can also be known as a low loss test 1.85mm plug to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100082 RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm male to 1.85mm female cable has a maximum VSWR of 1.5:1. This PE3C100082 1.85mm plug to 1.85mm jack cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100082 can also be used in the other direction and will be a 1.85mm jack to 1.85mm plug cable assembly if the opposite connectivity is required. This low loss test 1.85mm plug to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements. | 10 | |||
| PEWSP1000 | Pasternack Enterprises | Key Specifications, Waveguide Size 1: WR-22, Flange Size 1: UG-383/U, Waveguide Size 2: WR-22, Flange Size 2: UG-383/U, Length: 4.25 inches, Frequency, Min: 33 GHz, Frequency, Max: 50 GHz. WR-22 Waveguide Pressurizing Section 4.25 Inch Length, UG-383/U Square Cover Flange from 33 GHz to 50 GHz. PEWSP1000 22 waveguide section is straight and is 4.25 inches long. This 4.25 inch 22 straight waveguide section from Pasternack is standard and has a UG-383/U flange. Our straight 22 waveguide section with UG-383/U flange has a minimum frequency of 33 GHz and a maximum frequency of 50 GHz. 22 waveguide section PEWSP1000 is part of over 40,000 RF, microwave and millimeter wave components. Our standard 22 straight waveguide section will ship same the day as it is purchased worldwide as with our other RF parts. |
| 6 | ||
| PE3C100060-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to 2.92mm Male Low Loss Test Cable 12 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100060-12 low loss test 2.92mm male to 2.92mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100060-12 can also be known as a low loss test 2.92mm plug to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100060-12 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm male cable has a maximum VSWR of 1.4:1. This PE3C100060-12 2.92mm plug to 2.92mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.92mm plug to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements. |
| 2 | ||
| PE3C100015-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to TNC Male Low Loss Space Cable 12 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA female bulkhead to TNC male low loss space cable 12 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to TNC male low loss space cable 12 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C100015-12 can also be known as a low loss space SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100015-12 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to TNC male cable has a maximum VSWR of 1.4:1. SMA jack to TNC plug cable assembly PE3C100015-12 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100015-12 can also be used in the other direction and will be a TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss space SMA jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements. |
| 0 | ||
| PE3C100015-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to TNC Male Low Loss Space Cable 18 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA female bulkhead to TNC male low loss space cable 18 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to TNC male low loss space cable 18 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C100015-18 can also be known as a low loss space SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100015-18 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to TNC male cable has a maximum VSWR of 1.4:1. SMA jack to TNC plug cable assembly PE3C100015-18 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100015-18 can also be used in the other direction and will be a TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss space SMA jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10008 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: D-Sub, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm. 1.85mm Male to D-Sub Plug Right Angle Cable Using Tinned RG405 Coax. PE3C10008 is a 1.85mm male to D-Sub plug right angle cable using RG405 Tinned coax. This Pasternack 1.85mm male to D-Sub plug right angle cable assembly uses a 50 Ohm 1.85mm for connector 1 and a 50 Ohm D-Sub for connector 2. 1.85mm to D-Sub right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 1.85mm to plug D-Sub right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C10008 1.85mm male to D-Sub plug right angle cable assembly is constructed with RG405 Tinned coax. | 0 | |||
| PE3W10002-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Female to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA female to SMA male right angle low loss cable 36 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to SMA male right angle low loss cable 36 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W10002-36, can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W10002-36 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10002-36 can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle low loss cable 36 inch length using LMR-100 coax. |
| 0 | ||
| PE3C100021-4 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 4 inches. 1.0mm Male to 1.0mm Male Armored Low Loss Test Cable 4 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm male armored low loss test cable 4 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm male armored low loss test cable 4 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100021-4 can also be known as a low loss test 1.0mm plug to 1.0mm plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100021-4 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. Low loss test 1.0mm male to 1.0mm male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements. |
| 0 | ||
 Teledyne HiRel | M38510/00101BCA | Teledyne HiRel | NAND GATE, 8-INPUT RoHS : Not Compliant | 0 | ||
M38510/00101BBA | Teledyne HiRel | NAND GATE, 8-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00107BBA | Teledyne HiRel | NAND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/00205BCA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL RoHS : Not Compliant | 0 | |||
| M38510/00905BFA | Teledyne HiRel | SHIFT REGISTER, 4-BIT BIDIRECTIONAL RoHS : Not Compliant | 0 | |||
| M38510/00205BAA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL RoHS : Not Compliant | 0 | |||
| M38510/00401BCA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00302BBA | Teledyne HiRel | BUFFER/DRIVER, NAND, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00301BAA | Teledyne HiRel | BUFFER/DRIVER, NAND, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00701BAA | Teledyne HiRel | EXCLUSIVE-OR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00802BCA | Teledyne HiRel | HEX INVERTING BUFFERS WITH HIGH VOLTAGE OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/00105BAA | Teledyne HiRel | HEX INVERTER RoHS : Not Compliant | 0 | |||
| M38510/00301BCA | Teledyne HiRel | BUFFER/DRIVER, NAND, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
| M38510/00107BCA | Teledyne HiRel | NAND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/00205BDA | Teledyne HiRel | FLIP-FLOP, D-TYPE, DUAL RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | PWCR0805-VK-1000FT | VENKEL LTD | Pulse Withstanding CR;0805;1/2W;�100PPM;100R;�1% RoHS : Compliant | 5,000 | ||
| MEHF0102-YK-1000GT | VENKEL LTD | High Frequency MELF;0102;3/10W;�100PPM;100R�2% RoHS : Not Compliant | 0 | |||
| MELFC0102-YE-1000DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;100R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-VN-1000BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�10PPM;100R;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1000DT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;100R;�0.5% RoHS : Compliant | 0 | |||
| UPTF2010-2W-N-1000DT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;100R;�0.5% RoHS : Compliant | 0 | |||
| PWCR2010-XK-1000FT | VENKEL LTD | Pulse Withstanding CR;2010;1W;�100PPM;100R;�1% RoHS : Compliant | 0 | |||
| HPTF0805-RP-1000CT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�5PPM;100R;�0.25% RoHS : Compliant | 0 | |||
| PWCR2512-ZK-1000FT | VENKEL LTD | Pulse Withstanding CR;2512;1.5W;�100PPM;100R;�1% RoHS : Compliant | 0 | |||
| MEHF0204-TK-1000FT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;100R�1% RoHS : Not Compliant | 0 | |||
| MELFC0102-RE-1000FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;100R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TE-1000CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;100R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-TZ-1000DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�15PPM;100R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZZ-1000BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�15PPM;100R;�0.1% RoHS : Compliant | 0 | |||
| MELFM0207-VC-1000DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�50PPM;100R;�0.5% RoHS : Not Compliant | 0 | |||
 Vyrian | PAC100005007FA1000 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 1W, 0.5ohm, 0.7V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Compliant | 15,571 | ||
| 231-736/001-000 | WAGO Innovative Connections | Strip Terminal Block, 10A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 15,210 | |||
| T4110002041-000 | TE Connectivity | Circular Connector, 4 Contact(s), Female, Receptacle RoHS : Compliant | 12,872 | |||
| PAC100002709FA1000 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 1W, 27ohm, 1% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Compliant | 12,605 | |||
| FC2331-0000-1000-L | TE Connectivity | Force Sensor RoHS : Compliant | 11,617 | |||
| T4110002051-000 | TE Connectivity | Circular Connector, 5 Contact(s), Female, Receptacle RoHS : Compliant | 11,452 | |||
| PAC100003600FA1000 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 1W, 360ohm, 1% +/-Tol, 100ppm/Cel, Through Hole Mount RoHS : Compliant | 11,309 | |||
| T2100042101-000 | TE Connectivity | Rectangular Connector, 4 Contact(s), Male RoHS : Compliant | 10,398 | |||
| T2100042201-000 | TE Connectivity | Rectangular Connector, 4 Contact(s), Female RoHS : Compliant | 9,818 | |||
| 10326-3210-000 | 3m Electronic Products Division | Connector Accessory, Junction Shell | 6,532 | |||
| T4010008031-000 | TE Connectivity | Circular Connector, 3 Contact(s), Female, Receptacle RoHS : Compliant | 5,946 | |||
| 222K163-100-0 | TE Connectivity | HEAT SHRINK BOOT, SINGLE WALL, 43/25 ID Before Shrink, 1.5:1 Shrink Ratio, BLACK RoHS : Compliant | 5,829 | |||
| T4110001031-000 | TE Connectivity | Circular Connector, 3 Contact(s), Female, Screw Terminal, Receptacle RoHS : Compliant | 4,143 | |||
| 2001-1211/1000-411 | WAGO Innovative Connections | Modular Terminal Block RoHS : Compliant | 607 | |||
| 2002-3212/1000-673 | WAGO Innovative Connections | Modular Terminal Block RoHS : Compliant | 444 | |||
 Waytek, Inc. | AL-MP-1000-9-C-5M | Advanced Cable Ties Inc | ACT AL-MP-1000-9-C-5M cable tie mounting base is a natural nylon mount designed to anchor cable ties to panels and flat surfaces. It features a square base, four-way tie entry, and a screw-mount style for organized wire routing and harness support in general-purpose installations. |
| 8,168 | |
| 5701000BK00R2 | ShawCor Ltd | DSG-Canusa CPA-100 dual-wall heat shrink tubing is black adhesive-lined polyolefin tubing with a 1" size for sealing and protecting wires, splices, and terminals. Its dual-wall construction supports moisture resistance, abrasion protection, and durable environmental sealing in spool applications. |
| 6,600 | ||
| CPX 100 0250 BLACK | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .250" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 6,400 | ||
| 7100054613 | 3M | 3M FP301-1/4-200' heat shrink tubing is black 1/4" thin-wall polyolefin on a 200' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where moderate diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed. |
| 2,000 | ||
| 7100025153 | 3M | 3M FP301-3/16-250' heat shrink tubing is black 3/16" thin-wall polyolefin on a 250' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where flexible installation and dependable commercial-grade heat shrink performance are needed. |
| 750 | ||
| 4201000OR00R2 | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a 1.000" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 600 | ||
| TB100-05 | Eaton Electronics | Double Row 5 Position 2 Holes Terminal Block 30A 300V Max #6-32 SCREWS |
| 174 | ||
| 7100030629 | 3M | 3M FP-301-3/4-50' heat shrink tubing is black 3/4" thin-wall polyolefin on a 50' spool with a 2:1 shrink ratio. It is designed for insulating and protecting wire connections where larger diameter coverage, flexible installation, and dependable commercial-grade heat shrink performance are needed. |
| 150 | ||
| 121B10-00P-KA | Eaton Electronics | ShortStop Circuit Breaker 10A Plastic No Bracket Type 1 KEPS NUT |
| 141 | ||
| VJD2S001-00000-000 | Carling Technologies | V-Series Rocker Switch Body, DPDT, ON-OFF-ON, 20A, 12VDC Illumination-Incandescent |
| 20 | ||
| V1D2GNN1-00000-000 | Carling Technologies | V-Series Rocker Switch Body, SPST, ON-OFF, 20A, 12VDC Dual Illumination LED Amber |
| 20 | ||
| V1D2A601-00000-000 | Carling Technologies | V-Series Rocker Switch Body, SPDT, ON-NONE-OFF, 20A, 12VDC Illumination-Incandescent RoHS : Compliant |
| 13 | ||
| 221010-0002 | Unity Manufacturing Co Ltd | Unity 221010-0000, 6" Halogen Black Post-Mount Spotlight, 100W, 7A, 12VDC |
| 3 | ||
| 5551000RD0048 | ShawCor Ltd | DSG-Canusa 5551000RD0048 CPA-300 heat shrink tubing is red adhesive-lined tubing with a 1.000" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 1 | ||
| 22310-000 | Eaton Electronics | 10 AMP Circuit Breaker Type 3 ATC Blade Bussmann 22310-000 |
| 0 | ||
 Win Source Electronics | ERJ-3EKF1000V | Panasonic Electronic Components | RES SMD 100 OHM 1% 1/10W 0603 / 100 Ohms ±1% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200 Thick Film |
| 301,190 | |
| 2024100002 | Molex | CONN RCP USB3.1 TYPEC 24P SMD RA RoHS : Compliant |
| 180,000 | ||
| 2N7002_R1_00001 | PanJit Semiconductor | N-ch Mos-fet 0, 25A 60V SOT23 RoHS : Compliant |
| 53,970 | ||
| WSL2010R1000FEA | Vishay Huntington | RES SMD 0.1 OHM 1% 1W 2010 |
| 40,000 | ||
LMP91000SD | Texas Instruments | Sensor AFE System: Configurable AFE Potentiostat for Low-Power Chemical Sensing Applications |
| 25,180 | ||
LMP91000SD/NOPB | Texas Instruments | IC AFE 1 CHAN 8BIT 14WSON RoHS : Compliant |
| 22,900 | ||
| 36911000000 | Littelfuse Inc | FUSE BOARD MNT 1A 300VAC RADIAL / 1 A 300 V AC DC Fuse Board Mount (Cartridge Style Excluded) Through Hole Radial, Box RoHS : Compliant |
| 20,000 | ||
| PJC138K_R1_00001 | PanJit Semiconductor | SOT-323, MOSFET / N-Channel 50 V 360mA (Ta) 236mW (Ta) Surface Mount SOT-323 RoHS : Compliant |
| 17,100 | ||
| 10104111-0001LF | Amphenol FCi | MICRO USB A/B TYPE RECEPTACLE | CONN RCPT USB2.0 MICRO AB SMD RA RoHS : Compliant |
| 9,210 | ||
| MASW-008322-TR1000 | MACOM | IC RF SWITCH SPDT 20GHZ 24QFN RoHS : Compliant |
| 6,621 | ||
| BAV99S-AU_R1_000A1 | PanJit Semiconductor | SOT-363, SWITCHING / Diode Array 2 Pair Series Connection Standard 100 V 150mA Surface Mount 6-TSSOP, SC-88, SOT-363 RoHS : Compliant |
| 5,320 | ||
| ADAS1000-2BCPZ | Analog Devices Inc | IC AFE 5 CHAN 19BIT 56LFCSP RoHS : Compliant |
| 2,270 | ||
| MAX21000+ | Maxim Integrated Products | IC GYROSCOPE 3-AXIS 16LGA / Gyroscope X (Pitch), Y (Roll), Z (Yaw) ±31.25, 62.50, 125, 250, 500, 1000, 2000 0.1Hz ~ 400Hz I2C, SPI 16-LGA (3x3) RoHS : Compliant |
| 1,500 | ||
| AX1000-2FG676I | Microsemi Corporation (now Microchip) | IC FPGA 418 I/O 676FBGA RoHS : Not Compliant |
| 120 | ||
| 900-83310-0001-000 | NVIDIA | Jetson TX2 Module |
| 8 | ||
 Wuhan P&S | TEMT1000 | Vishay Intertechnologies | Silicon NPN Phototransistor, RoHS-Compliant RoHS : Compliant |
| 200,000 | |
| MMA02040C1000FB300 | Vishay Intertechnologies | Professional Thin Film MELF Resistors RoHS : Compliant |
| 101,580 | ||
| TCLD1000 | Vishay Intertechnologies | Optocoupler, Photodarlington Output RoHS : Compliant |
| 33,000 | ||
| PR01000104707JA100 | Vishay Intertechnologies | PR01 5% A1 R47 RoHS : Compliant |
| 30,000 | ||
| PR01000103308JA100 | Vishay Intertechnologies | PR01 5% A1 3R3 RoHS : Compliant |
| 30,000 | ||
| PR01000103309JA100 | Vishay Intertechnologies | Power Metal Film Leaded Resistors RoHS : Compliant |
| 19,000 | ||
| PCAN1206E1000BST5 | Vishay Intertechnologies | Thin film resistor-SMD, 2W, 100��, 25ppm, 0.1%, 1206 RoHS : Compliant |
| 17,500 | ||
| TX3B336K020C1000 | Vishay Intertechnologies | Tantalum capacitor, 33 ? F RoHS : Unknown |
| 4,000 | ||
| CMB02070X1000GB200 | Vishay Intertechnologies | High Pulse Load Carbon Film MELF Resistors��100�� ��2% 1W RoHS : Compliant |
| 4,000 | ||
RF2631-000 | Littelfuse Inc | 72V,40A,PTC Resettable Fuses RoHS : Compliant |
| 3,000 | ||
| 10025026-10002TLF | Amphenol FCi | PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P RoHS : Compliant |
| 1,200 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand