100-P08-R Price, nhà phân phối, Stock

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154 Coax., Pasternack’s PE3C100064-100CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100064-100CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100064-100CM RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100064-100CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100064-100CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $863.1
5 : $828.58
10 : $794.05
25 : $759.53

PE3TC1100-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SF200LL, RF Cable Type: PE-SF200LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. BNC Male to BNC Male Low Frequency Low Loss Cable 100 cm Length Using PE-SF200LL Coax, RoHS., Radio frequency assembly BNC male to BNC male low frequency low loss cable 100 cm length using PE-SF200LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. BNC male to BNC male low frequency low loss cable 100 cm length using PE-SF200LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3TC1100-100CM, can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3TC1100-100CM is built with PE-SF200LL which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low frequency low loss cable 100 cm length using PE-SF200LL coax, RoHS.

1 : $147.99
25 : $140.59
50 : $133.19
100 : $127.27

PE3C100065-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Female to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154 Coax., Pasternack’s PE3C100065-100CM low loss test 2.4mm female to 2.4mm female RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm female to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100065-100CM can also be known as a low loss test 2.4mm jack to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100065-100CM RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm female to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100065-100CM 2.4mm jack to 2.4mm jack cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm jack to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $869.85
5 : $835.06
10 : $800.26
25 : $765.47

PE3C100083-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 1.85mm Female to 1.85mm Female Low Loss Test Cable 100 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100083-100CM low loss test 1.85mm female to 1.85mm female RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100083-100CM can also be known as a low loss test 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100083-100CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm female to 1.85mm female cable has a maximum VSWR of 1.5:1. This PE3C100083-100CM 1.85mm jack to 1.85mm jack cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm jack to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements.

1 : $1,167.15
5 : $1,120.46
10 : $1,073.78
25 : $1,027.09

PE1006-3-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #4-40 LENGTH (INCHES): 1/2" MATERIAL: ZINC PLATED *100 PIECES PER PACKAGE*.

1 : $34.39

PE1007-100PK

Pasternack Enterprises

NUT THREAD SIZE: #3-56 MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*.

1 : $35.59
25 : $33.81
50 : $32.03
100 : $30.61

PE3W02100LF/HS-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMP Female Right Angle to BNC Female Bulkhead Cable 100 CM Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMP to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to BNC cable is a female to female coax assembly, PE3W02100LF/HS-100CM, can also be known as a right angle SMP jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to BNC jack cable assembly PE3W02100LF/HS-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02100LF/HS-100CM can also be used in the other direction and will be BNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to BNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE1004-1-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #3-56 LENGTH (INCHES): 1/4" MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*.

1 : $57.99
25 : $55.09
50 : $52.19
100 : $49.87

PE1004-3-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #3-56 LENGTH (INCHES): 1/2" MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*.

1 : $15.99
25 : $15.19
50 : $14.39
100 : $13.75

PE3C100081-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 1.85mm Male to 1.85mm Male Low Loss Test Cable 100 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100081-100CM low loss test 1.85mm male to 1.85mm male RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100081-100CM can also be known as a low loss test 1.85mm plug to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100081-100CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm male to 1.85mm male cable has a maximum VSWR of 1.5:1. This PE3C100081-100CM 1.85mm plug to 1.85mm plug cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm plug to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements.

1 : $1,166.3
5 : $1,119.65
10 : $1,073.0
25 : $1,026.34

PE3C100016-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. TNC Male to TNC Male Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly TNC male to TNC male low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss space TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C100016-100CM can also be known as a low loss space TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. TNC low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100016-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C100016-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. Low loss space TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss space RF cable assembly as per your requirements.

1 : $439.99
10 : $422.39
25 : $404.79
100 : $387.19

PE3C100014-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to TNC Male Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA male to TNC male low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C100014-100CM can also be known as a low loss space SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100014-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3C100014-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100014-100CM can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements.

1 : $465.99
10 : $447.35
25 : $428.71
100 : $410.07

PE3C100015-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Female Bulkhead to TNC Male Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA female bulkhead to TNC male low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to TNC male low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C100015-100CM can also be known as a low loss space SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100015-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to TNC male cable has a maximum VSWR of 1.4:1. SMA jack to TNC plug cable assembly PE3C100015-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100015-100CM can also be used in the other direction and will be a TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss space SMA jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements.

1 : $467.99
10 : $449.27
25 : $430.55
100 : $411.83

PE3W10025-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W10025-100CM can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W10025-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10025-100CM can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

Teledyne HiRel

M38510/01001BEA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

M38510/01001BFA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

5962-9091001MRA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, EDGE-TRIGGERED, WITH CLOCK ENABLE
RoHS : Not Compliant

M38510/00105BBA

Teledyne HiRel

HEX INVERTER
RoHS : Not Compliant

M38510/00301BDA

Teledyne HiRel

BUFFER/DRIVER, NAND, DUAL 4-INPUT
RoHS : Not Compliant

M38510/31002BXA

Teledyne HiRel

AND GATE, TRIPLE 3-INPUT, WITH OPEN-COLLECTOR INPUTS
RoHS : Not Compliant

M38510/31004BBA

Teledyne HiRel

AND GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00302BCA

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00904BEA

Teledyne HiRel

SHIFT REGISTER, 8-BIT PARALLELERIAL INPUT
RoHS : Not Compliant

M38510/01405BFA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

M38510/21002BKA

Teledyne HiRel

PROM, 2K X 8, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/31005BAA

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-8761001DA

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-9161001MLA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 9-BIT, POS. EDGE-TRIGGERED, TTL-COMP INPUTS, TS-OUTPUTS
RoHS : Not Compliant

M38510/00102BDA

Teledyne HiRel

NAND GATE, DUAL 4-INPUT
RoHS : Not Compliant

Venkel Ltd.

CR01005-32W-9100FT

VENKEL LTD

Chip Resistor;01005;1/32W;910R;�1%
RoHS : Compliant

C01005HQN160-100GNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;10pF;�2%
RoHS : Compliant

C01005HQN250-100FNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�1%
RoHS : Compliant

C01005X7R100-221KNE

VENKEL LTD

Chip Capacitor;01005;X7R;10V;220pF;�10%
RoHS : Compliant

C01005HQN250-100CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�0.25pF
RoHS : Compliant

C0201HQN100-100FNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;10pF;�1%
RoHS : Compliant

CR01005-32W-1004FT

VENKEL LTD

Chip Resistor;01005;1/32W;1M;�1%
RoHS : Compliant

C01005HQN160-100CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;10pF;�0.25pF
RoHS : Compliant

C01005HQN250-100DNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�0.5pF
RoHS : Compliant

C0201HQN100-100GNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;10pF;�2%
RoHS : Compliant

C01005HQN250-100JNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�5%
RoHS : Compliant

C01005HQN160-100FNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;10pF;�1%
RoHS : Compliant

CR01005-32W-1002FT

VENKEL LTD

Chip Resistor;01005;1/32W;10K;�1%
RoHS : Compliant

CR01005-32W-2100FT

VENKEL LTD

Chip Resistor;01005;1/32W;210R;�1%
RoHS : Compliant

C01005C0G250-100JNP

VENKEL LTD

Chip Capacitor;01005;C0G;25V;10pF;�5%
RoHS : Compliant

Waytek, Inc.

33000-1003

Molex

22GA Pin Terminal 33000-1003 D WIND 7500/Reel
RoHS : Compliant

7,500 : $0.055
37,500 : $0.055

22,500

22/1 UL1007 BROWN

Unified Wire and Cable Inc

22GA Brown Tinned Copper UL 1007/1569 CSA TR-64 300V Disc by Supplier

250 : $0.0755
500 : $0.0613
1,000 : $0.0526
2,500 : $0.0448
10,000 : $0.0404

18,250

7100164976

16-14 GA Blue Nylon Butt Conn. wSleeve & Dielec. Grease * Handling Notice *

20 : $0.5611
50 : $0.5411
100 : $0.5211
200 : $0.4953
500 : $0.4781
1,000 : $0.4609

9,471

CPX 100 0375 BK 100'

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .375" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $0.4254
500 : $0.3895

8,200

33000-1003

Molex

The Molex 33000-1003 is an MX150 1.5 mm sealed male pin terminal designed for low-current automotive and sealed connector applications. It is specifically sized for 22 Ga. wire and features an open-barrel crimp for secure conductor and insulation support. Constructed from tin-plated high-performance copper alloy, it provides reliable conductivity and corrosion resistance. Rated up to ~22A and 14VDC, it is compatible with MX150 sealed and unsealed connector housings for durable, vibration-resistant performance.
RoHS : Compliant

50 : $0.0945
200 : $0.0891
500 : $0.0867
1,000 : $0.0836

3,934

7100164282

22-18 GA #8 Ring Terminal Heat Shrink Sealed

25 : $0.7854
50 : $0.6993
100 : $0.6347
200 : $0.6132
500 : $0.5944
1,000 : $0.5702

1,960

175-S1-100-2

100A Push Trip Reset 1/4" Stud Surface S X S Circuit Breaker HI AMP SIDE BY SIDE 46985

1 : $32.03
5 : $28.59
10 : $26.79
50 : $25.15
100 : $23.95
200 : $22.9

394

181100P-01-1

Eaton Electronics