100/48-SDT-2-R Price, nhà phân phối, Stock

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. UHF Male to N Male Low Loss Cable 100 cm Length Using LMR-195 Coax., Radio frequency assembly UHF male to N male low loss cable 100 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to N male low loss cable 100 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and type N cable connection on the other. Our low loss UHF to N type cable assemblies have a male gender on end 1 and male on end 2. This UHF to N type cable is a male to male coax assembly, PE3W10069-100CM, can also be known as a low loss UHF plug to type N plug cable assembly and will be shipped same-day as it is purchased. UHF plug to type N plug cable assembly PE3W10069-100CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency UHF male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10069-100CM can also be used in the other direction and will be type N male to UHF male cable assembly if the opposite connectivity is required. Low loss UHF plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to type N cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to N male low loss cable 100 cm length using LMR-195 coax.

1 : $51.79
25 : $49.2
50 : $46.61
100 : $44.54

488

PE3C100070-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Female Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100070-100CM low loss test 2.4mm male to 2.4mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100070-100CM can also be known as a low loss test 2.4mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100070-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm female cable has a maximum VSWR of 1.4:1. This PE3C100070-100CM 2.4mm plug to 2.4mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100070-100CM can also be used in the other direction and will be a 2.4mm jack to 2.4mm plug cable assembly if the opposite connectivity is required. This low loss test 2.4mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $877.36
5 : $842.27
10 : $807.17
25 : $772.08

PE3C100069-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100069-100CM low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100069-100CM can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100069-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100069-100CM 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $870.66
5 : $835.83
10 : $801.01
25 : $766.18

PE3C100083-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 1.85mm Female to 1.85mm Female Low Loss Test Cable 100 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100083-100CM low loss test 1.85mm female to 1.85mm female RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C100083-100CM can also be known as a low loss test 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100083-100CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm female to 1.85mm female cable has a maximum VSWR of 1.5:1. This PE3C100083-100CM 1.85mm jack to 1.85mm jack cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm jack to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements.

1 : $1,167.15
5 : $1,120.46
10 : $1,073.78
25 : $1,027.09

PE1006-3-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #4-40 LENGTH (INCHES): 1/2" MATERIAL: ZINC PLATED *100 PIECES PER PACKAGE*.

1 : $36.89

PE3W02100LF/HS-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMP Female Right Angle to BNC Female Bulkhead Cable 100 CM Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and BNC bulkhead cable connection on the other. Our right angle SMP to BNC cable assemblies have a female gender on end 1 and female on end 2. This SMP to BNC cable is a female to female coax assembly, PE3W02100LF/HS-100CM, can also be known as a right angle SMP jack to BNC jack cable assembly and will be shipped same-day as it is purchased. SMP jack to BNC jack cable assembly PE3W02100LF/HS-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to BNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02100LF/HS-100CM can also be used in the other direction and will be BNC female bulkhead to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to BNC cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to BNC female bulkhead cable 100 cm length using RG178 coax with heatshrink, LF solder.

1 : $100.99
25 : $95.94
50 : $90.89
100 : $86.85

PE1004-1-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #3-56 LENGTH (INCHES): 1/4" MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*.

1 : $62.09
25 : $58.99
50 : $55.88
100 : $53.4

PE3C100061-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.92mm Male to 2.92mm Female Low Loss Test Cable 100 CM Length Using PE-TC154 Coax., Pasternack’s PE3C100061-100CM low loss test 2.92mm male to 2.92mm female RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100061-100CM can also be known as a low loss test 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100061-100CM RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100061-100CM 2.92mm plug to 2.92mm jack cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100061-100CM can also be used in the other direction and will be a 2.92mm jack to 2.92mm plug cable assembly if the opposite connectivity is required. This low loss test 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements.

1 : $819.55
5 : $786.77
10 : $753.99
25 : $721.2

PE3C100067-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 2.92mm Male to 2.92mm Female Low Loss Test Cable 100 CM Length Using PE-TC154A Coax., Pasternack’s PE3C100067-100CM low loss test 2.92mm male to 2.92mm female RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.92mm cable connection on one end and a 2.92mm cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100067-100CM can also be known as a low loss test 2.92mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.92mm to 2.92mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100067-100CM RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.92mm male to 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C100067-100CM 2.92mm plug to 2.92mm jack cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100067-100CM can also be used in the other direction and will be a 2.92mm jack to 2.92mm plug cable assembly if the opposite connectivity is required. This low loss test 2.92mm plug to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm low loss test RF cable assembly as per your requirements.

1 : $833.81
5 : $800.46
10 : $767.11
25 : $733.75

PE1004-3-100PK

Pasternack Enterprises

PHILLIPS SCREW THREAD SIZE: #3-56 LENGTH (INCHES): 1/2" MATERIAL: STAINLESS STEEL *100 PIECES PER PACKAGE*.

1 : $17.19
25 : $16.33
50 : $15.47
100 : $14.78

PE3C100081-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC142A, RF Cable Type: PE-TC142A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. 1.85mm Male to 1.85mm Male Low Loss Test Cable 100 CM Length Using PE-TC142A Coax., Pasternack’s PE3C100081-100CM low loss test 1.85mm male to 1.85mm male RF cable assembly using PE-TC142A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100081-100CM can also be known as a low loss test 1.85mm plug to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 1.85mm to 1.85mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100081-100CM RF cable has a ruggedized aramid yarn jacket of 0.141-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 1.85mm male to 1.85mm male cable has a maximum VSWR of 1.5:1. This PE3C100081-100CM 1.85mm plug to 1.85mm plug cable assembly is built with PE-TC142A, which is a flexible coax type. The Pasternack flexible 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 39.37-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 1.85mm plug to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm low loss test RF cable assembly as per your requirements.

1 : $1,166.3
5 : $1,119.65
10 : $1,073.0
25 : $1,026.34

PE1009-100PK

Pasternack Enterprises

NUT THREAD SIZE: #4-40 MATERIAL: ZINC PLATED *100 PIECES PER PACKAGE*.

1 : $2.45
25 : $2.33
50 : $2.21
100 : $2.11

PE3W10025-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male Right Angle to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our low loss right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W10025-100CM can also be known as a low loss right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W10025-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10025-100CM can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male low loss cable 100 cm length using LMR-100 coax.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

PE3W10074-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Female to Push-On SMP Female Right Angle Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMA female to push-on SMP female right angle cable 100 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to push-on SMP female right angle cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W10074-100CM, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W10074-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10074-100CM can also be used in the other direction and will be right angle SMP female to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to push-on SMP female right angle cable 100 cm length using LMR-100 coax.

1 : $45.19
25 : $42.93
50 : $40.67
100 : $38.86

PE3C100012-100CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMA Male to SMA Female Bulkhead Low Loss Space Cable 100 CM Length Using PE-R200LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss space cable 100 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead low loss space cable 100 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss space SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C100012-100CM can also be known as a low loss space SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.437-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100012-100CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C100012-100CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100012-100CM can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss space RF cable assembly as per your requirements.

1 : $526.99
10 : $505.91
25 : $484.83
100 : $463.75

TE Connectivity

T2210002010-031

TE Connectivity

DIA1.0 FEMALE STAMPING CONTACT,SN PLATED Connector System: Wire-to-Wire Circular Connector Type: Circular Connector Receptacle Sealable: Yes Contact Current Rating (Max): 5 A Circuit Application: Signal Wire-to-Wire Circular Connector Receptacle 5 A | Standard Circular Connector | Part Number: T2210002010-031 | Internal Number: T2210002010-031 | TE Connectivity
RoHS : Compliant

5,000 : $0.27
2,500 : $0.27
1,000 : $0.28
500 : $0.29
250 : $0.29
100 : $0.3
50 : $0.31
25 : $0.31
10 : $0.32
1 : $0.33

7,000

T2210001010-010

TE Connectivity

DIA1.0 MALE STAMPING CONTACT,AU PLATED Connector System: Wire-to-Wire Circular Connector Type: Circular Connector Plug Sealable: Yes Contact Current Rating (Max): 5 A Circuit Application: Signal Wire-to-Wire Circular Connector Plug 5 A | Standard Circular Connector | Part Number: T2210001010-010 | Internal Number: T2210001010-010 | TE Connectivity
RoHS : Compliant

5,000 : $0.46
2,500 : $0.47
1,000 : $0.48
500 : $0.49
250 : $0.5
100 : $0.51
50 : $0.52
25 : $0.53
10 : $0.54
1 : $0.56

3,660

T4110002081-000

TE Connectivity

M12,FEMALE,STRAIGHT,A CODE,8P,PG9,GOLD Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 8 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 8 20 | M12 Field Installable Unshielded | Part Number: T4110002081-000 | Internal Number: T4110002081-000 | TE Connectivity
RoHS : Compliant

250 : $31.3
100 : $32.56
50 : $33.81
25 : $35.06
10 : $36.32
1 : $37.57

2,598

T4110011081-000

TE Connectivity

M12 F, 8P GOLD A_CODE S SHIELDED PG7 Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Receptacle Number of Positions: 8 Circular Connector Shell Size: 20 Sealable: Yes Cable-to-Cable Circular Connector Receptacle 8 20 | Standard Circular Connector | Part Number: T4110011081-000 | Internal Number: T4110011081-000 | TE Connectivity
RoHS : Compliant

250 : $43.19
100 : $44.91
50 : $46.64
25 : $48.36
10 : $50.1
1 : $51.82

223

T2100042201-000

TE Connectivity

HK4/0-004-F,WITH ONE SLOT SCREW Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 4 Termination Method to Wire & Cable: Screw Terminal Number of Positions: 4 Socket Contact Insert 4 Screw Terminal | Rectangular Contact Insert | Part Number: T2100042201-000 | Internal Number: T2100042201-000 | TE Connectivity
RoHS : Compliant

25 : $23.31
10 : $25.1
1 : $26.89

182

T1010062100-000

TE Connectivity

H6B-KDBP Connector Cover Type: Protective Cover Primary Product Color: Gray Primary Product Material: PC Operating Temperature (Max): 125 °C Operating Temperature (Max): 257 °F Protective Cover Gray | Connector Cap & Cover | Part Number: T1010062100-000 | Internal Number: T1010062100-000 | PC | TE Connectivity
RoHS : Compliant

50 : $8.35
25 : $8.84
10 : $9.33
1 : $9.82

T2010043101-000

TE Connectivity

HA-004-MS Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 4+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 4+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010043101-000 | Internal Number: T2010043101-000 | TE Connectivity
RoHS : Compliant

50 : $15.93
25 : $16.87
10 : $17.8
1 : $18.74

T1340100121-000

TE Connectivity

H10B-TGH-RO-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Bottom Hood & Base Locking Device Type: Locking Sealable: Yes Hood Bottom Locking | Rectangular Connector Hoods & Base | Part Number: T1340100121-000 | Internal Number: T1340100121-000 | TE Connectivity
RoHS : Compliant

25 : $20.44
10 : $22.01
1 : $23.58

FC2211-0000-0100-L

TE Connectivity

MID RANGE COMPRESSION SENSOR Force Sensor Type: OEM Compression Load Cells Force Direction: Compression Full Scale Range: 100 lbf Operating Temperature Range: -40 – 85 °C Operating Temperature Range: -40 – 185 °F OEM Compression Load Cells | Medium Compression Load Cell 10 – 100 Lbf | Part Number: FC2211-0000-0100-L | Internal Number: FC2211-0000-0100-L | TE Connectivity
RoHS : Compliant

1 : $124.62

T1310060111-000

TE Connectivity

H6B-TS-PG11 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310060111-000 | Internal Number: T1310060111-000 | TE Connectivity
RoHS : Compliant

25 : $14.66
10 : $15.79
1 : $16.92

T2010033101-000

TE Connectivity

HA-003-MS Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 3 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 3 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010033101-000 | Internal Number: T2010033101-000 | TE Connectivity
RoHS : Compliant

50 : $13.09
25 : $13.86
10 : $14.63
1 : $15.4

T1490100221-000

TE Connectivity

H10B-SDRH-BO-2PG21 Hood & Base Connector Product Type: Base Housing Cable Entry Location: Side Hood & Base Locking Device Type: Locking Sealable: Yes Base Housing Side Locking | Rectangular Connector Hoods & Base | Part Number: T1490100221-000 | Internal Number: T1490100221-000 | TE Connectivity
RoHS : Compliant

50 : $34.47
25 : $36.5
10 : $38.53
1 : $40.56

T1910100121-009

TE Connectivity

H10BPR-TSH-PG21-EMC-C Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Screwlock Hood Side Screwlock | Rectangular Connector Hoods & Base | Part Number: T1910100121-009 | Internal Number: T1910100121-009 | TE Connectivity
RoHS : Compliant

1 : $48.54

T2100062101-000

TE Connectivity

HK4/2-006-M Contact Type: Pin Rectangular Connector Insert Type: Contact Insert Pole Configuration: 6 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Pin Contact Insert 6 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2100062101-000 | Internal Number: T2100062101-000 | TE Connectivity
RoHS : Compliant

25 : $45.8
10 : $49.33
1 : $52.85

CJP100J100RJ

TE Connectivity

CJP 100W 100R 5% Lead Resistance Value: 100 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 100 Ω Wire Wound 5 % Power Resistor | Part Number: CJP100J100RJ | Internal Number: 2-2176504-5 | TE Connectivity
RoHS : Compliant

10 : $62.73
1 : $69.7

Teledyne HiRel

M38510/01001BFA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

M38510/01001BEA

Teledyne HiRel

DECODER, BCD-TO-DECIMAL
RoHS : Not Compliant

5962-9221002M2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9451003MXA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 83 MHZ
RoHS : Not Compliant

M38510/01701BEA

Teledyne HiRel

FLIP-FLOP, D-TYPE, HEX
RoHS : Not Compliant

M38510/11003BCA

Teledyne HiRel

OP AMP, QUAD
RoHS : Not Compliant

5962-9221004M2A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS, PRESETTABLE, TLL-COMPATIBLE INPUTS
RoHS : Not Compliant

M38510/00107BDA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/00803BAA

Teledyne HiRel

BUFFER/DRIVER, HEX, NONINVERTING, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/00109BCA

Teledyne HiRel

NAND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

M38510/31005B2A

Teledyne HiRel

AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-87610012A

Teledyne HiRel

NAND GATE, TRIPLE 3-INPUT
RoHS : Not Compliant

5962-9451001MXA

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 12 MACROCELL, 50 MHZ
RoHS : Not Compliant

M38510/00302BBA

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT
RoHS : Not Compliant

M38510/01405BEA

Teledyne HiRel

DATA SEL/MULTIPLEXER, QUAD 2-INPUT
RoHS : Not Compliant

Venkel Ltd.

CR01005-32W-1000FT

VENKEL LTD

Chip Resistor;01005;1/32W;100R;�1%
RoHS : Compliant

20,000

AGC0603C0G100-100FNP

VENKEL LTD

Auto Grade Capacitor;0603;C0G;10V;10pF;�1%
RoHS : Compliant

C01005X7R100-102KNE

VENKEL LTD

Chip Capacitor;01005;X7R;10V;1000pF;�10%
RoHS : Compliant

C01005HQN160-100FNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;10pF;�1%
RoHS : Compliant

C01005C0G160-100JNE

VENKEL LTD

Chip Capacitor;01005;C0G;16V;10pF;�5%
RoHS : Compliant

C01005HQN250-100CNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�0.25pF
RoHS : Compliant

C0201HQN100-100FNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;10pF;�1%
RoHS : Compliant

C01005HQN160-100JNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;16V;10pF;�5%
RoHS : Compliant

CR01005-32W-1001FT

VENKEL LTD

Chip Resistor;01005;1/32W;1K;�1%
RoHS : Compliant

C01005HQN250-100GNP

VENKEL LTD

High-Q NP0 Capacitor;01005;HQN;25V;10pF;�2%
RoHS : Compliant

C0201HQN100-100JNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;10V;10pF;�5%
RoHS : Compliant

AGC0402C0G100-100FNP

VENKEL LTD

Auto Grade Capacitor;0402;C0G;10V;10pF;�1%
RoHS : Compliant

C01005C0G160-100KNP

VENKEL LTD

Chip Capacitor;01005;C0G;16V;10pF;�10%
RoHS : Compliant

AGC0603C0G100-100JNP

VENKEL LTD

Auto Grade Capacitor;0603;C0G;10V;10pF;�5%
RoHS : Compliant

CR01005-32W-5100FT

VENKEL LTD

Chip Resistor;01005;1/32W;510R;�1%
RoHS : Compliant

Vyrian

PRA100I2-100KDPNT

Vishay Intertechnologies

Array/Network Resistor, Isolated, Thin Film, 0.1W, 100000ohm, 50V, 0.5% +/-Tol, 10ppm/Cel, Surface Mount, 0806
RoHS : Compliant

17,399

MFU0402FF01000E100

Vishay Intertechnologies

Electric Fuse, Very Fast Blow, 1A, 32VDC, 50A (IR), Surface Mount
RoHS : Compliant

17,080

PAC100002709FA1000

Vishay Intertechnologies

Fixed Resistor, Wire Wound, 1W, 27ohm, 1% +/-Tol, 100ppm/Cel, Through Hole Mount
RoHS : Compliant

12,605

H3CR-A8EAC100-240/DC100-125

ROHM Semiconductor

Solid State Module

11,170

T2100042201-000

TE Connectivity

Rectangular Connector, 4 Contact(s), Female
RoHS : Compliant

9,818

RT100AS1001KB

Vishay Intertechnologies

Potentiometer, Wire Wound, 100W, 1000ohm, 316V, 10% +/-Tol

9,445

JM38510/01005BFB

Texas Instruments

Decimal Decoder/Driver, TTL/H/L Series, Inverted Output, TTL, CDFP16

8,562

DSC1001CE1-004.0000T

Microchip Technology Inc

CMOS Output Clock Oscillator, 4MHz Nom
RoHS : Compliant

7,311

DS1100LZ-100+T

Analog Devices Inc

Silicon Delay Line, 1-Func, 5-Tap, True Output, CMOS, PDSO8
RoHS : Compliant

6,667

DSC1001BI5-010.0000

Microchip Technology Inc

CMOS Output Clock Oscillator, 10MHz Nom
RoHS : Compliant

4,586

JM38510/01005BEB

Texas Instruments

Decoder/Driver, TTL/H/L Series, Inverted Output, TTL, CDIP16

3,935

DSC1001CI3-100.0000

Microchip Technology Inc

CMOS Output Clock Oscillator, 100MHz Nom
RoHS : Compliant

2,757

PR01000302709JK100

Vishay Intertechnologies

Fixed Resistor, Metal Film, 1W, 27ohm, 350V, 5% +/-Tol, 250ppm/Cel, Through Hole Mount
RoHS : Compliant

554

MPMT10011002ATS

Vishay Intertechnologies

Array/Network Resistor, Divider, Thin Film, 0.2W, 100V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206
RoHS : Compliant

258

ATC100B100JP500X

KYOCERA AVX

Ceramic Capacitor, Multilayer, Ceramic, 500V, 5% +Tol, 5% -Tol, P90, 90+/-20ppm/Cel TC, 0.00001uF, Surface Mount, 1111

231

Waytek, Inc.

7100163861

12-10 GA #6 Spade Terminal Insulated Vinyl

50 : $0.5695
200 : $0.5264
500 : $0.4785
1,000 : $0.4428
5,000 : $0.4219

6,992

CPX 100 0375 BK 100'

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .375" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

100 : $0.4254
500 : $0.3895

5,800

7100164270

12-10 GA #3/8 Ring Terminal Heat Shrink Sealed

20 : $1.1302
50 : $1.0071
100 : $0.9139
200 : $0.884
500 : $0.8542
1,000 : $0.8206

5,227

7100163898

22-18GA Male Disconnect Red Nylon .187 X. 020 Fully Insulated

50 : $0.414
200 : $0.3918
500 : $0.3641
1,000 : $0.3493

3,559

50100MT

Hillsdale Terminal & Tool Inc

Vinyl 16-14 Ga Ring Terminal, 10 Stud, Reel (1,000 pcs = 1 Reel)

1,000 : $0.0682
5,000 : $0.0621

3,000

10043MT

Hillsdale Terminal & Tool Inc

Non-Insulated 22-18 Ga, Ring Terminal, 3/8" Stud, Reel (2,000 pcs = 1 Reel)

2,000 : $0.0615
10,000 : $0.0554

2,000

57100 OR 611-010

Ideal Clamp Products Inc

Standard Stainless Steel Band Hose Clamp #10 Band 1/2" 1/2" TO 1-1/16"

10 : $1.4053
50 : $1.2543
100 : $1.1381
200 : $1.1033
500 : $1.0627
1,000 : $1.0221

1,969

AL-08-100-SS-CT-C

Advanced Cable Ties Inc

ACT AL-08-100-SS-CT-C 316 coated stainless steel cable tie is a corrosion-resistant metal tie with 150 lb. tensile strength for securing wire bundles, hoses, and tubing in harsh environments. Its coated stainless construction supports durable fastening where heat, moisture, chemicals, or vibration are present.

100 : $1.7838
100 : $1.6804
200 : $1.6545
500 : $1.6158
1,000 : $1.577

1,000

NMLT-90100KON

AFC Cable Systems Inc

Fitting For 1" Liquid Tight Conduit, Right Non-Metallic

1 : $10.17
10 : $9.16
50 : $8.43
100 : $7.62
200 : $7.1
500 : $6.57

0341001001

The Bosch Group

Master Battery Disconnect Switch, 24VDC, 100A, 500A for 5 secs. Inrush

1 : $45.72
5 : $43.89
10 : $42.08
25 : $39.57

VJD2UTT1-00000-000

Carling Technologies

V-Series Rocker Switch Body, DPDT, ON-OFF-ON, 20A, 12VDC Dual Illum. Superbright RD LED

1 : $25.8097
10 : $24.7975
20 : $24.1649
50 : $23.7854
100 : $22.1407
200 : $20.749

84-2031-00

Xantrex Technology Inc

Xantrex LinkPRO Monitor

1 : $357.58
5 : $350.5225
10 : $345.8175
25 : $341.1125
50 : $334.055

PINV1000SW-120

Eaton Electronics

Tripp Lite 1000W Pure SINE Wave Power Inverter w/USB Charging

1 : $459.5111
5 : $433.9584
10 : $408.4517

4600-1001B

Egis Mobile Electric

Kill Switch for TH&TDR Series Time Delay Relays

1 : $25.21
5 : $22.54
10 : $21.06
50 : $19.28
100 : $18.39
200 : $17.2

5551000RD0048

ShawCor Ltd

DSG-Canusa 5551000RD0048 CPA-300 heat shrink tubing is red adhesive-lined tubing with a 1.000" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing.

1 : $20.98
10 : $18.06
50 : $16.43
100 : $15.01
500 : $14.15

Win Source Electronics

ES1002FL_R1_00001

PanJit Semiconductor

SOD-123FL, SUPER / Diode Standard 200 V 1A Surface Mount SOD-123FL
RoHS : Compliant

8,455 : $0.0355
6,315 : $0.0396
4,880 : $0.041
3,550 : $0.0423
2,290 : $0.0437
940 : $0.0532

360,000

SS10100FL_R1_00001

PanJit Semiconductor

SOD-123FL, SKY
RoHS : Compliant

10,310 : $0.0291
7,720 : $0.0324
5,975 : $0.0335
4,340 : $0.0346
2,795 : $0.0358
1,150 : $0.0436

240,000

MPZ1005S100CT000

TDK Corporation

FERRITE BEAD 10 OHM 0402 1LN
RoHS : Compliant

28,305 : $0.0106
21,190 : $0.0118
16,395 : $0.0122
11,905 : $0.0126
7,695 : $0.013
3,165 : $0.0158

100,000

SS20100FL_R1_00001

PanJit Semiconductor

SOD-123FL, SKY / Diode Schottky 100 V 2A Surface Mount SOD-123FL
RoHS : Compliant

6,075 : $0.0494
4,540 : $0.0551
3,510 : $0.057
2,550 : $0.0589
1,645 : $0.0608
675 : $0.0741

92,400

PA1005.100NLT

Pulse Electronics Corporation

XFRMR CURR SENSE 2.0MH 1:100 SMD
RoHS : Compliant

735 : $0.41
590 : $0.4267
455 : $0.4434
315 : $0.4767
205 : $0.4934
95 : $0.5267

31,450

X1A000091000100

Epson Electronics America Inc

12.5pF SMD3215-2P Crystals RoHS

1,020 : $0.2955
760 : $0.3296
590 : $0.341
430 : $0.3523
275 : $0.3637
115 : $0.4432

22,300

CLF10060NIT-100M-D

TDK Corporation

FIXED IND 10UH 3.6A 20.4MOHM SMD
RoHS : Compliant

305 : $0.9849
230 : $1.0985
180 : $1.1364
130 : $1.1743
85 : $1.2122
35 : $1.4773

19,040

XC3S100E-4VQG100I

AMD Xilinx

FPGA Spartan®-3E Family 100K Gates 2160 Cells 572MHz 90nm Technology 1.2V 100-Pin VTQFP / IC FPGA 66 I/O 100VQFP
RoHS : Compliant

7 : $47.2587
5 : $52.7116
4 : $54.5293
3 : $56.3469
2 : $58.1646
1 : $70.888

16,000

DS1100LU-100+

Maxim Integrated Products

IC DELAY LINE 5TAP 100NS 8UMAX
RoHS : Compliant

129 : $2.6078
97 : $2.9088
75 : $3.009
55 : $3.1093
35 : $3.2096
15 : $3.9117

15,562

DSC1001CI2-100.0000T

Microchip Technology Inc

MEMS OSC XO 100.0000MHZ CMOS SMD / 100 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Standby (Power Down) 4-VDFN
RoHS : Compliant

103 : $3.2843
77 : $3.6632
60 : $3.7895
43 : $3.9159
28 : $4.0422
12 : $4.9263

6,688

XP1001000-05R

Lantronix Inc

IC MOD DSTNI-EX 25MHZ 256KB
RoHS : Compliant

5 : $65.0
4 : $72.5
3 : $75.0
2 : $77.5
1 : $80.0

5,000

XC3S100E-4VQG100C

AMD Xilinx

FPGA Spartan®-3E Family 100K Gates 2160 Cells 572MHz 90nm Technology 1.2V 100-Pin VTQFP / IC FPGA 66 I/O 100VQFP
RoHS : Compliant

15 : $21.325
11 : $23.7855
9 : $24.6057
6 : $25.4259
4 : $26.2461
2 : $31.9874

3,600

VR37000001004JA100

Vishay Huntington

RES 1M OHM 5% 1/2W AXIAL

2,310 : $0.1456
1,725 : $0.1624
1,335 : $0.168
970 : $0.1736
625 : $0.1792
260 : $0.2184

3,541

UBX-M10050-KB-A0100A

u-blox AG

IC GPS GNSS SUPER LO PWR 47WLCSP
RoHS : Compliant

93 : $3.25
69 : $3.625
54 : $3.75
39 : $3.875
25 : $4.0
11 : $4.875

2,500

DS1100Z-100

Maxim Integrated Products

IC DELAY LINE 5TAP 100NS 8SOIC
RoHS : Not Compliant

39 : $8.6925
29 : $9.6956
23 : $10.0299
17 : $10.3643
11 : $10.6986
5 : $13.0388

2,500

Wuhan P&S

RCS1206100RFKEA

Vishay Intertechnologies

RCS1206 100 100R 1% ET1 E3
RoHS : Compliant

1 : $0.27
100 : $0.09
500 : $0.09
1,000 : $0.09

45,000

PR01000104707JA100

Vishay Intertechnologies

PR01 5% A1 R47
RoHS : Compliant

1 : $0.38
100 : $0.13
500 : $0.12
1,000 : $0.12

30,000

PR01000103308JA100

Vishay Intertechnologies

PR01 5% A1 3R3
RoHS : Compliant

1 : $0.37
100 : $0.13
500 : $0.12
1,000 : $0.12

30,000

PR01000103309JA100

Vishay Intertechnologies

Power Metal Film Leaded Resistors
RoHS : Compliant

1 : $0.37
100 : $0.13
500 : $0.12
1,000 : $0.12

19,000

IHLP4040DZEK100M1A

Vishay Intertechnologies

IHLP-4040DZ-1A 10 20% EK E3
RoHS : Compliant

1 : $3.42
100 : $1.14
500 : $1.06
1,000 : $1.03

16,000

MMA02040D1004BB300

Vishay Intertechnologies

Precision Thin Film MELF Resistors1 M�� 0.1% 0.25W
RoHS : Compliant

1 : $1.06
100 : $0.36
500 : $0.33
1,000 : $0.32

15,000

MRS25000C1002FRP00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.35
100 : $0.12
500 : $0.11
1,000 : $0.11

15,000

MRS25000C1004FCT00

Vishay Intertechnologies

Professional Thin Film Leaded Resistors
RoHS : Compliant

1 : $0.29
100 : $0.1
500 : $0.09
1,000 : $0.09

15,000

CMA02040X1001GB300

Vishay Intertechnologies

Load Carbon Film MINI-MELF Resistors
RoHS : Compliant

1 : $0.5125
100 : $0.2053
500 : $0.1896
1,000 : $0.1844

9,000

LTO100F1R000JTE3

Vishay Intertechnologies

LTO 100 F 1U 5% TU30 E3
RoHS : Compliant

1 : $30.38
100 : $10.13
500 : $9.37
1,000 : $9.12

6,300

CMB02070X1000GB200

Vishay Intertechnologies

High Pulse Load Carbon Film MELF Resistors��100�� 2% 1W
RoHS : Compliant

1 : $1.14
100 : $0.38
500 : $0.36
1,000 : $0.35

4,000

FODM1009R2

onsemi

DC Sensing Input, Phototransistor Opt
RoHS : Compliant

1 : $0.46
100 : $0.29
500 : $0.24
1,000 : $0.22

3,000

10025026-10002TLF

Amphenol FCi

PCI Express : x8 Straddle-Mount Card Edge Connector, 98 Positions, 1 mm (0.039 in.) P
RoHS : Compliant

1 : $3.68
100 : $3.51
500 : $3.07
1,000 : $2.96

1,200

10028917-001LF

Amphenol FCi

Power Header 2x2
RoHS : Compliant

1 : $7.05
100 : $6.74
500 : $5.9
1,000 : $5.69

300

STW11NK100Z

STMicroelectronics

1000V,1.1Ohm,8.3A,N-CHANNEL Power MOSFET
RoHS : Compliant

1 : $1.98
100 : $1.76
500 : $1.68
1,000 : $1.5

100/48-SDT-2-R nhà phân phối

Link URL