| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0SP-2B6-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Bisco Industries | #10SPL SS BO | WASHERS | 11,870 | |||
| 0.078X1.250SP 42 PS | PINS | 3,600 | ||||
| 0.203X0.093X0.010SPL SS PL | WASHERS | 2,000 | ||||
| 0.187X0.750SP ST PL | PINS | 1,362 | ||||
| 0.125X1.750SP ST ZC | PINS | 900 | ||||
| 630SP8 | PINS | 500 | ||||
| 0.078X1.000SP SS PS | PINS | 472 | ||||
| 0.125X0.250SP ST ZC | PINS | 400 | ||||
| 60SPG00006 | Micro Plastics Inc | 400 | ||||
| 0.313X2.000SP ST PL | PINS | 200 | ||||
| #0SPL 41 PS | WASHERS | 134 | ||||
| 0.125X0.500SP ST ZC | PINS | 96 | ||||
| 4-40SP SS PL | NUTS | 50 | ||||
| 60SPG00002 | Micro Plastics Inc | 17 | ||||
| 0.094X1.000SP ST PL | PINS | 10 | ||||
![]() ComSIT USA | DMPH6050SPDQ13 | Diodes Incorporated | AVAILABLE EU | 3,110 | ||
![]() GLYN GmbH & Co. KG | GATW70SPBB1RD | Solomon Goldentek Display Corp | TFT 7.00", 800x480, 440cd, RGB (TTL), 4-wire res. | 108 | ||
![]() Rutronik | 606-1-122-10-2-2-00-SPL-NYU | Weitronic Enterprise Co Ltd | 12P FEMALE HEADER SMT W/O CAP RoHS : Compliant |
| 30,000 | |
| IR2110SPBF | Infineon Technologies AG | High and Low Side Driver SOIC RoHS : Compliant |
| 3,600 | ||
| CY8CKIT4700SPLUSTOBO1 | Infineon Technologies AG | PSoC 4700S Plus Inductive Sensing EVK RoHS : Compliant |
| 1 | ||
![]() Braemac Americas-Symmetry | 108-00019-050-SP | Silex Technology America Inc | (Sample Pack) Prestta WLAN Antenna - 6 Piece Sample Pack, Isolated Magnetic Dipole (IMD) stamped metal antenna for use with SX-SDCAG, SX-SDMGN/SX-SDMAN, and SX-560/SX-570/SX-580 |
| 0 | |
| SX-SDCAC-2830-SP | Silex Technology America Inc | Multiprotocol Modules 1x1 Wi-Fi+BLE radio /basbnd SDIO EvalMod |
| 0 | ||
| KG100S-PK6130A | Silicon Laboratories Inc |
| 0 | |||
| SX-590-2700-SP-WWR | Silex Technology America Inc | SX-590-2700-WWR:(Sample Pack) Internal Serial or Ethernet to 802.11a/b/g/n/ac wireless module |
| 0 | ||
| SX-ULPGN-BTZ-2000-SP | Silex Technology America Inc | [Sample Pack] The SX-ULPGN-BTZ-2000-SP sample pack contains three individual radios to allow small production quantities for prototyping. The Silex SX-ULPGN-BTZ is a highly integrated IoT SoC based on |
| 0 | ||
| SX-SDPAC-2830-SP | Silex Technology America Inc | [Sample Pack] 802.11a/b/g/n/ac SDIO System-in-Package (SiP). |
| 0 | ||
![]() Chip-Germany GmbH | EEE1EA330SP | Panasonic Electronic Components | RoHS : Compliant | 18 | ||
IRL630SPBF![]() | International Rectifier | RoHS : Compliant | 3 | |||
| IRF5210SPBF | Infineon Technologies AG | RoHS : Compliant | 1 | |||
![]() Component Electronics, Inc | BLM41P800SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 16,484 | |
| 500SPT221J | Jaro Components Inc | IN STOCK SHIP TODAY |
| 6,600 | ||
| BLM21P300SPTM00-03 | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY |
| 6,201 | ||
| VERSAFIT-3/4-0-SP-SM | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 200 | |||
VN820SP13TR![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 96 | ||
| NTFR-1-1/2-0-SP | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 80 | ||
| VERSAFIT-3/16-0-SP | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
VN540SP![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 20 | ||
| LPJ-40SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 12 | ||
| LPJ-200SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| LPJ-110SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| LPJ-60SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 10 | ||
| LPJ-90SP | Eaton Bussmann | IN STOCK SHIP TODAY RoHS : Unknown |
| 5 | ||
| RP-4800-NO.1-0-SP | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| RNF-3000-6/2-0-SP | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1 | ||
![]() FDH Electronics | MWRD30SPN062 | Essex Electric Inc | Magnet Wire | 7,830 | ||
| HCTE-0375-0-SP | TE Connectivity | Cable Protect RoHS : Compliant |
| 2,047 | ||
| HCTE-0625-0-SP | TE Connectivity | Cable Protect RoHS : Compliant |
| 2,016 | ||
| RT555-1/2-0-SP | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 700 | ||
| RT555-3/8-0-SP | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 343 | ||
| M23053/4-304-0 SPL | SUMITOMO ELECTRIC Industries Ltd | Heat Shrink Prd | 161 | |||
| SFR-1/8-0-SP | HEATSHRINK | Harness Mgmt | 3 | |||
| SFR-7/8-0-SP | TE Connectivity | Heat Shrink Prd RoHS : Compliant | 0 | |||
| RT555-1/8-0-SP | TE Connectivity | Heat Shrink Prd RoHS : Compliant | 0 | |||
| VERSAFIT-3/16-0-SP | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | ||
| RW-200-E-3/16-0-SP | TE Connectivity | Harness Mgmt RoHS : Compliant |
| 0 | ||
| RT555-1-1/2-0-SP | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| SFR-1-1/4-0-SP-CS9376 | TE Connectivity | Harness Mgmt | 0 | |||
| NTFR-3/8-0-SP-CS5445 | TE Connectivity | Harness Mgmt RoHS : Compliant | 0 | |||
| ATUM-3/1-0-SP | TE Connectivity | Heat Shrink Prd RoHS : Compliant |
| 0 | ||
![]() Flip Electronics | NSR0620SP2T5G | onsemi | Stock, Ship Today RoHS : Compliant |
| 8,000 | |
IRL620SPBF![]() | Vishay Intertechnologies | Stock RoHS : Compliant | 7,000 | |||
| AR0134CSSM00SPCA0-DPBR | onsemi | Stock, Ship Today RoHS : Compliant | 6,977 | |||
| AP0101CS2L00SPGA0-DR1 | onsemi | Stock, Ship Today RoHS : Compliant |
| 6,528 | ||
| AR0134CSSC00SPCA0-DRBR | onsemi | Stock, Ship Today RoHS : Compliant | 4,336 | |||
| AR0134CSSC00SPCA0-TPBR | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,334 | ||
| AR0134CSSC00SPD20 | onsemi | Stock RoHS : Compliant | 4,334 | |||
| AR0130CSSC00SPCA0-DRBR | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,898 | ||
| AR0134CSSM00SPCA0-DPBR1 | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,183 | ||
IRL630SPBF![]() | Vishay Intertechnologies | Stock RoHS : Compliant | 1,000 | |||
| AR0130CSSC00SPBA0-DR1 | onsemi | Stock, Ship Today RoHS : Compliant |
| 912 | ||
| ASX340CS2C00SPED0-TPBR | onsemi | Stock, Ship Today RoHS : Compliant |
| 898 | ||
| AR0130CSSM00SPCA0-DRBR2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 6 | ||
| AR0130CSSC00SPCA0-DPBR2 | onsemi | Stock, Ship Today RoHS : Compliant |
| 5 | ||
| AR0134CSSM00SPCA0-DPBR2 | onsemi | Stock, Ship Today |
| 2 | ||
![]() Maritex | AP64350SP-13 | Diodes Incorporated | DC DC Converters; AP64350SP-13; DIODES RoHS : Compliant |
| 4,817 | |
| AP64500SP-13 | Diodes Incorporated | DC DC Converters; AP64500SP-13; DIODES RoHS : Compliant |
| 3,197 | ||
| PBHTD10SPP-CT | CONNTHERM | Pin Header; pitch 1.27mm; 2x5 pins; assembly: SMD; female; straight; double row; pick&place pad |
| 2,866 | ||
| NF-120RW10500SP-3014-WW | NiViss | 120x 3014 module, warm white 2900-3100K, CRI80, 24V, 10W, white soldermask, PCB size 500x10mm, dividable every 6 LEDs/25mm, RoHS |
| 355 | ||
VN920SPTR-E![]() | STMicroelectronics | Specialty Drivers; VN920SPTR-E; STMICROELECTRONICS; 1; 1; Tape & Reel (TR) RoHS : Compliant |
| 128 | ||
| HFT5000-20/10-0-SP | TE Connectivity | Heat Shrink Tubing; HFT5000-20/10-0-SP; TE CONNECTIVITY; Polyester, Polyethylene; Black; Compliant; Yes RoHS : Compliant |
| 60 | ||
| VERSAFIT-3/4-0-SP | TE Connectivity | Heat Shrink Tubing; VERSAFIT-3/4-0-SP; TE CONNECTIVITY; Polyolefin; Black; Compliant; Yes RoHS : Compliant |
| 17 | ||
| 4C.02.9.024.0050SPA | FINDER SpA | Interface relay; electromagnetic; contact rating current 8A; coil voltage 24VDC; 2 changeover contact DPDT; coil power 0.5W; 8A/250VAC, 6A/24VDC; screw terminals; DIN-Rail |
| 10 | ||
| 4C.01.9.024.0050SPA | FINDER SpA | Interface relay; electromagnetic; contact rating current 16A; coil voltage 24VDC; 1 changeover contact SPDT; coil power 0.5W; 16A/250VAC, 16A/24VDC; screw terminals; DIN-Rail |
| 10 | ||
| 48.52.7.024.0050SPA | FINDER SpA | Interface relay; electromagnetic; contact rating current 8A; coil voltage 24VDC; 2 changeover contact DPDT; coil power 0.5W; 8A/250VAC, 8A/24VDC; screw terminals; DIN-Rail |
| 10 | ||
![]() Master Electronics | ZHTM-3/1.5-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Polyolefin Black Thick Piece RoHS : Compliant |
| 174 | |
| HTAT-32/8-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Polyolefin Black Thin Spool RoHS : Compliant |
| 152 | ||
| A10SPK8C | Pentair Equipment Protection - Hoffman | The A10SPK8C is a swing-out panel kit for installing front-mounted panels into 10.00 x 8.00 inch enclosures. RoHS : Compliant |
| 14 | ||
| RF047-A-M0SP-M0SP-0152 | Samtec Inc | 50 OHM RoHS : Compliant |
| 0 | ||
| MT3000-1-0-SP | TE Connectivity | MT3000-1-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
ZH150-5/2.5-0-SP![]() | TE Connectivity | ZH150-5/2.5-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| X2-5.0-0-SP | TE Connectivity | Heat Shrink Tubing - Single Thin Wall - 2:1 Shrink Ratio - 0.221 (5.6 mm) - 328 ft (100 m) Length - Black. RoHS : Compliant |
| 0 | ||
| NT-1-1/4-0-SP | TE Connectivity | Heat Shrinkable Tubing and Caps MOQ Reduction RoHS : Compliant |
| 0 | ||
| VERSAFLEX-30-0-SP | TE Connectivity | VERSAFLEX-30-0-SP RoHS : Compliant |
| 0 | ||
| VFC-PT/FLK20/ET200SP | Phoenix Contact | VFC-PT/FLK20/ET200SP RoHS : Compliant |
| 0 | ||
| RT-790-3/8-0-SP | TE Connectivity | RT-790-3/8-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| RT555-1/2-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Fluoropolymer Black Thin Piece MOQ Reduction RoHS : Compliant |
| 0 | ||
| RP-4800-NO.12-0-SP | TE Connectivity | RP-4800-NO.12-0-SP MOQ Reduction RoHS : Compliant |
| 0 | ||
| SFR-3/4-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Silicone Elastomer Black Medium Piece MOQ Reduction RoHS : Compliant |
| 0 | ||
| SFR-7/8-0-SP | TE Connectivity | Heat Shrink Tubing ST Cross Linked Silicone Elastomer Black Medium Piece MOQ Reduction RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 800SP9B7M6REC2BLK | E-Switch Inc | Pushbutton Switches .4A @ 20V (AC/DC) Off-(On) SPST/SPDT RoHS : Compliant |
| 50 | |
| 700SP7B10M2REH | E-Switch Inc | Pushbutton Switches - Board Mount SPDT ON(ON) PC MNT RoHS : Compliant |
| 50 | ||
| 100SP1T1B1M2QEH | E-Switch Inc | Toggle Switches TOGGLE, 5A 120VAC/28VDC, SPDT On-On, Panel Mount PC Pin RoHS : Compliant |
| 50 | ||
| 100SP1T6B11M1REH | E-Switch Inc | Toggle Switches SPDT ON-ON SLDR MNT RoHS : Compliant |
| 50 | ||
| 100SP3T1B4M7QE | E-Switch Inc | Toggle Switches 5A 120VAC/28VDC On-Off-On PC Mnt RoHS : Compliant |
| 50 | ||
| 100SP3T2B4VS2QE | E-Switch Inc | Toggle Switches SPDT ON-ON PC MNT |
| 50 | ||
| 100SP5T6B11M6QEH | E-Switch Inc | Toggle Switches 5A 120VAC/28VDC On-Off-(On) PC Mnt RoHS : Compliant |
| 50 | ||
FS5700SPLT2B2M1QEH![]() | E-Switch Inc | Pushbutton Switches - Board Mount PUSHBUTTON, 1A 9VDC, SPDT On-On, Panel Mount, Rear Solder RoHS : Compliant |
| 50 | ||
| T30SP6FF200Q | Banner Engineering Corp | PE Sensor, EZ-Beam Fixed Field, R: 200mm, 10-30Vdc, PNP L/D, QDM12, 33436 |
| 41 | ||
| 700SP7B11M1RE | E-Switch Inc | Pushbutton Switches .4A @ 20VAC On-(On) SPDT Solder RoHS : Compliant |
| 31 | ||
| T30SP6RQ | Banner Engineering Corp | Photoelectric Sensor, Receiver, R: 60m, 10-30VDC, L/D PNP, QDM12, 33444 |
| 17 | ||
| T30SP6FF600QP | Banner Engineering Corp | PE Sensor, BGS Fixed Field, EZ-BEAM, 600mm Range, 10-30VDC, L/D PNP, 6" Cable QDM12, 18356 |
| 16 | ||
| 4C.P1.9.024.0050SPA | FINDER SpA | Interface Module; SPDT 10A; 24V DC coil; push-in terminal socket |
| 12 | ||
| 48.52.8.230.0060SPA | FINDER SpA | DPDT DIN Rail Panel Mount Interface Relay Module Screw, 8A 230V ac |
| 6 | ||
| 48.61.7.012.0050SPA | FINDER SpA | SPDT DIN Rail Panel Mount Interface Relay Module Screw; 16A 12V dc |
| 0 | ||
![]() Pasternack Enterprises US | PE39430/SP1 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Right Angle Cable Using PE-SR405FLJ Coax with 180 Deg. Clock, LF Solder., Radio frequency assembly SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE39430/SP1 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE39430/SP1 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable using PE-SR405FLJ coax with 180 deg. clock, LF solder. | 3,745 | ||
| PE3W11470/SP-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: RA, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: RA, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug RA to Push-On SMP Female RA Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly MMCX plug RA to push-on SMP female RA low loss cable 12 inch length using PE-C100-LSZH coax with heatshrink and 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug RA to push-on SMP female RA low loss cable 12 inch length using PE-C100-LSZH coax with heatshrink and 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a ra MMCX cable connection on one end and a ra SMP cable connection on the other. Our low loss ra MMCX to ra SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W11470/SP-12 can also be known as a low loss ra MMCX male to ra SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11470/SP-12 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our ra MMCX plug to ra SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W11470/SP-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with ra MMCX to ra SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W11470/SP-12 can also be used in the other direction and will be a ra SMP female to ra MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX ra male to SMP ra jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP low loss RF cable assembly as per your requirements. |
| 3,039 | ||
| PE3W11470/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: RA, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: RA, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug RA to Push-On SMP Female RA Low Loss Cable 48 Inch Length Using PE-C100-LSZH Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly MMCX plug RA to push-on SMP female RA low loss cable 48 inch length using PE-C100-LSZH coax with heatshrink and 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug RA to push-on SMP female RA low loss cable 48 inch length using PE-C100-LSZH coax with heatshrink and 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a ra MMCX cable connection on one end and a ra SMP cable connection on the other. Our low loss ra MMCX to ra SMP cable assembly has a plug gender on end 1 and a female on end 2. PE3W11470/SP-48 can also be known as a low loss ra MMCX male to ra SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11470/SP-48 RF cable has a LSZH jacket of 0.109-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our ra MMCX plug to ra SMP female cable has a maximum VSWR of 1.4:1. MMCX male to SMP jack cable assembly PE3W11470/SP-48 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with ra MMCX to ra SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W11470/SP-48 can also be used in the other direction and will be a ra SMP female to ra MMCX plug cable assembly if the opposite connectivity is required. Low loss MMCX ra male to SMP ra jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMP cable assembly for quick shipment worldwide. Variations of MMCX and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to SMP low loss RF cable assembly as per your requirements. |
| 1,033 | ||
| PE3C1360/SP1-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240-UF Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1360/SP1-24 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C1360/SP1-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1360/SP1-24 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 24 inch length using LMR-240-UF coax with heatshrink and 90 deg. clock. |
| 1,015 | ||
| PE3C6640/SP-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-P103 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-P103 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6640/SP-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C6640/SP-12 is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-P103 coax. |
| 55 | ||
| PE3W01180/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Right Angle Cable Using PE-047SR Coax with 180 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable using PE-047SR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable using PE-047SR coax with 180 deg. clock, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180/SP can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180/SP is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable using PE-047SR coax with 180 deg. clock. | 5 | |||
| PE3W00390/SP1-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 48 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 48 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-48 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-48 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-48 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W09120/SP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMP Female Right Angle Cable Using PE-SR405FLJ Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to SMP female right angle cable using PE-SR405FLJ coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMP female right angle cable using PE-SR405FLJ coax with 270 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a right angle SMP cable connection on the other. Our right angle SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W09120/SP can also be known as a right angle SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W09120/SP RF cable has a FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our right angle SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W09120/SP is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W09120/SP can also be used in the other direction and will be a right angle SMP female to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements. | 0 | |||
| PE3W09490/SP | Pasternack Enterprises | 0 | ||||
| PE3W13970/SP5 | Pasternack Enterprises | 0 | ||||
| PE3C5330/SP | Pasternack Enterprises | 0 | ||||
| PE3W00390/SP1-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. TNC Male Right Angle to TNC Female Right Angle Bulkhead Low Loss Cable 72 Inch Length Using LMR-200 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC female right angle bulkhead low loss cable 72 inch length using LMR-200 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a male gender on end 1 and a female on end 2. PE3W00390/SP1-72 can also be known as a low loss right angle TNC plug to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00390/SP1-72 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle TNC male to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC plug to TNC jack cable assembly PE3W00390/SP1-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00390/SP1-72 can also be used in the other direction and will be a right angle TNC female bulkhead to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W13970/SP7 | Pasternack Enterprises | 0 | ||||
| PE3W05740/SP | Pasternack Enterprises | 0 | ||||
| PE3W13970/SP1 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | NTFR-3/16-0-SP | TE Connectivity | NTFR-3/16-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .1 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-3/16-0-SP | Internal Number: 1208484001 | Alias Number: 9-1190878-7 | TE Connectivity RoHS : Compliant |
| 876 | |
| RT555-3/8-0-SP | TE Connectivity | RT555-3/8-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 2: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .187 in Heat Shrink Tubing Black 2: 1 Single Wall | Part Number: RT555-3/8-0-SP | Internal Number: 0181534002 | Alias Number: 8-1190141-0 | TE Connectivity RoHS : Compliant |
| 654 | ||
| NTFR-1/8-0-SP | TE Connectivity | NTFR-1/8-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .061 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-1/8-0-SP | Internal Number: 5603764002 | Alias Number: 5-1194423-7 | TE Connectivity RoHS : Compliant |
| 623 | ||
| NTFR-1/4-0-SP | TE Connectivity | NTFR-1/4-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .143 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-1/4-0-SP | Internal Number: 3419254003 | Alias Number: 1192578-6 | TE Connectivity RoHS : Compliant |
| 308 | ||
| NTFR-5/8-0-SP | TE Connectivity | NTFR-5/8-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .357 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-5/8-0-SP | Internal Number: 5165424002 | Alias Number: 3-1194056-8 | TE Connectivity RoHS : Compliant |
| 274 | ||
| NTFR-7/8-0-SP | TE Connectivity | NTFR-7/8-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .5 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-7/8-0-SP | Internal Number: 3043434002 | Alias Number: 8-1192304-3 | TE Connectivity RoHS : Compliant |
| 202 | ||
| DR-25-3/16-0-SP | TE Connectivity | DR-25-3/16-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 2: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .094 in Heat Shrink Tubing Black 2: 1 Single Wall | Part Number: DR-25-3/16-0-SP | Internal Number: 5039294018 | Alias Number: 1-1193800-2 | TE Connectivity RoHS : Compliant |
| 164 | ||
| DRC16-40S-P013 | TE Connectivity | PLG, 40P, BLK, N, SEAL BOND Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 40 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.59 mm Deutsch Drc Housing | 24 V 40 | Part Number: DRC16-40S-P013 | Internal Number: DRC16-40S-P013 | Alias Number: ZPF000000000131294 | 1.59 mm | TE Connectivity RoHS : Compliant |
| 138 | ||
| NTFR-1-1/4-0-SP | TE Connectivity | NTFR-1-1/4-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .714 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-1-1/4-0-SP | Internal Number: 6229024003 | Alias Number: 5-1194923-1 | TE Connectivity RoHS : Compliant |
| 132 | ||
| NTFR-1-1/2-0-SP | TE Connectivity | NTFR-1-1/2-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .857 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-1-1/2-0-SP | Internal Number: 7973394002 | Alias Number: 5-1196169-9 | TE Connectivity RoHS : Compliant |
| 101 | ||
| NTFR-3/8-0-SP | TE Connectivity | NTFR-3/8-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .214 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NTFR-3/8-0-SP | Internal Number: 6614114002 | Alias Number: 9-1195213-9 | TE Connectivity RoHS : Compliant |
| 39 | ||
| NT-MIL-3/16-0-SP | TE Connectivity | NT-MIL-3/16-0-SP Tubing Product Type: Heat Shrink Tubing Primary Product Color: Black Shrink Ratio: 1.75: 1 Wall Type: Single Wall Recovered Inside Diameter (Max): .102 in Heat Shrink Tubing Black 1.75: 1 Single Wall | Part Number: NT-MIL-3/16-0-SP | Internal Number: E26016-000 | Alias Number: 3-1200621-3 | TE Connectivity RoHS : Compliant |
| 30 | ||
![]() Vyrian | RD3H080SPTL1 | ROHM Semiconductor | Power Field-Effect Transistor, 8A I(D), 45V, 0.147ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 16,173 | ||
| 100SP1T1B1M2QEH | E-Switch Inc | Toggle Switch, SPDT, On-on, Horizontal, 5A, 28VDC, 3 PCB Hole Cnt, Solder Terminal, Toggle Actuator, Through Hole-straight RoHS : Compliant | 16,149 | |||
VS-HFA08SD60SPBF![]() | Vishay Intertechnologies | Rectifier Diode, 1 Phase, 1 Element, 8A, 600V V(RRM), Silicon, TO-252AA RoHS : Compliant | 15,886 | |||
| HTAT-32/8-0-SP | TE Connectivity | HEAT SHRINK TUBE, DUAL WALL, RADIATION CROSSLINKED POLYOLEFIN, 32 ID Before Shrink, 4:1 Shrink Ratio, BLACK RoHS : Compliant | 12,841 | |||
| RW-200-E-3/16-0-SP | TE Connectivity | HEAT SHRINK TUBE, SINGLE WALL, CROSSLINKED FLUOROELASTOMER, 4.75 ID Before Shrink, 2:1 Shrink Ratio, BLACK RoHS : Compliant | 10,895 | |||
| TMS320SP104PGER | Texas Instruments | 9,340 | ||||
| TGS8250SPC | Texas Instruments | SPDT, 1 Func, GAAS | 9,149 | |||
| HCTE-0375-0-SP | TE Connectivity | Heat Shrinks RoHS : Compliant | 9,108 | |||
| AP65200SP-13 | Diodes Incorporated | Switching Regulator, Current-mode, 340kHz Switching Freq-Max, PDSO8 | 8,230 | |||
TMS320SP5410AGGU12![]() | Texas Instruments | Digital Signal Processor, 16-Bit Size, 16-Ext Bit, 50MHz, CMOS, PBGA144 RoHS : Not Compliant | 7,774 | |||
42CTQ030SPBF![]() | Vishay Intertechnologies | Rectifier Diode, Schottky, 1 Phase, 2 Element, 20A, 30V V(RRM), Silicon RoHS : Compliant | 878 | |||
| SP/LPJ-100SP | Cooper Industries | Electric Fuse, Time Delay Blow, 100A, 600VAC, 300VDC, 300000A (IR), Inline/holder | 756 | |||
| T30SP6RQ | Hans Turck & KG | Retroreflective Photoelectric Sensor | 457 | |||
| SP/LPJ-10SP | Cooper Industries | Electric Fuse, Time Delay Blow, 10A, 600VAC, 300VDC, 300000A (IR), Inline/holder | 200 | |||
IRG4PC50SPBF![]() | International Rectifier | Insulated Gate Bipolar Transistor, 70A I(C), 600V V(BR)CES, N-Channel, TO-247AC RoHS : Compliant | 87 | |||
![]() Wuhan P&S | AR0130CSSM00SPCA0-DRBR | onsemi | "AR0130CSSM00SPCA0-DRBR",Image Sensor RoHS : Compliant |
| 4,800 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |