 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0BL-30-AF5-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 ComSIT USA | ML22594900MBZ0BL | ROHM Semiconductor | AVAILABLE EU | 27,226 | ||
| 0900BL15C050E | J | AVAILABLE EU | 51,240 | |||
 NexGen Digital | MDC1000BLT1 | Motorola Semiconductor Products | RoHS : Not Compliant | 30,696 | ||
| MMBZ5240BLT1 | Motorola Semiconductor Products | RoHS : Not Compliant | 3,000 | |||
| GRM426C0G102J050BL | Murata Manufacturing Co Ltd | 2,765 | ||||
| BU9-6011R0BL | Coilcraft Inc | RoHS : Compliant | 240 | |||
| HSMS-2850-BLK | Hewlett Packard Co | 81 | ||||
 Rutronik | 73725-0110BLF | Amphenol Communications Solutions | USB Type-A 2.0 Upright THT Side-Entry RoHS : Compliant |
| 33,870 | |
 Chip 1 Exchange | MMU0102-50BL-120K+-1% | Vishay Beyschlag | INSTOCK | 27,000 | ||
| MMU0102-50BL-274K+-1% | Vishay BCcomponents | INSTOCK | 21,000 | |||
| MMA020450BL23R2 | Vishay Beyschlag | INSTOCK | 18,000 | |||
| MMA0204-50BL 2K2 1% | Vishay Intertechnologies | INSTOCK | 13,000 | |||
| MMA 0204-50 BL 43K2 1% | Vishay Beyschlag | INSTOCK | 10,140 | |||
| MMA0204-50BL 39K2 1% | INSTOCK | 3,865 | ||||
| MMA020450BL23R2 | Vishay Beyschlag | INSTOCK | 3,453 | |||
| MMA0204-50BL 39K2 1% | Vishay Beyschlag | INSTOCK | 2,869 | |||
| MMA0204-50BL20K 1% | Vishay Beyschlag | INSTOCK | 2,840 | |||
| MMA-0204-50-BL-91K-1% | INSTOCK | 2,784 | ||||
| MMA-0204-50BL-18K21% | INSTOCK | 2,700 | ||||
| MMA020450BL46K4 | Vishay Beyschlag | INSTOCK | 2,351 | |||
| MMA 0204-50 BL 18K 1% | Vishay Beyschlag | INSTOCK | 1,416 | |||
| MM A0204-50 BL 383R 1% | Vishay Beyschlag | INSTOCK | 1,190 | |||
| MMA0204-50 BL 15K 1% | Vishay Beyschlag | INSTOCK | 950 | |||
 Pasternack Enterprises US | PE3W05060/BL/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Cable Using PE-P086HF Coax with HeatShrink., Pasternack’s PE3W05060/BL/HS right angle SMA male to TNC male RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle SMA cable connection on one end and a TNC cable connection on the other. Our SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W05060/BL/HS can also be known as a right angle SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05060/BL/HS RF cable has an FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This PE3W05060/BL/HS SMA plug to TNC plug cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05060/BL/HS can also be used in the other direction and will be a TNC male to right angle SMA male cable assembly if the opposite connectivity is required. This SMA right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC RF cable assembly as per your requirements. | 0 | ||
| PE38750BLF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. White FAKRA Jack to FAKRA Jack Cable Using RG174 Coax with HeatShrink, LF Solder. PE38750BLF/HS is a FAKRA jack to FAKRA jack cable using RG174 coax. This Pasternack FAKRA jack to FAKRA jack cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38750BLF/HS FAKRA jack to FAKRA jack cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W05100/BL | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to MMCX Plug Cable Using PE-P086HF Coax, LF Solder., Pasternack’s PE3W05100/BL SMA female 2 hole flange to MMCX plug RF cable assembly using PE-P086HF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to MMCX plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with an SMA 2 hole flange cable connection on one end and a MMCX cable connection on the other. Our SMA to MMCX cable assembly has a female gender on end 1 and a plug on end 2. PE3W05100/BL can also be known as a SMA jack to MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 0.52 inches, allowing for a single bend without damaging the cable. Our PE3W05100/BL RF cable has an FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This PE3W05100/BL SMA jack to MMCX male cable assembly is built with PE-P086HF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a brass body with gold plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05100/BL can also be used in the other direction and will be a MMCX plug to SMA female 2 hole flange cable assembly if the opposite connectivity is required. This SMA jack 2 hole flange to MMCX male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA and MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MMCX RF cable assembly as per your requirements. | 0 | |||
| PE3C11000/BL | Pasternack Enterprises | 0 | ||||
 Teledyne HiRel | QPV2500BL-20KI | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR | 0 | ||
| QPV2500BL-20DI | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR RoHS : Unknown | 0 | |||
| QPV2500BL-20KC | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR | 0 | |||
| QPV2500BL-20DC | Teledyne HiRel | LOGIC ARRAY, 38-INPUT, 24-OUTPUT AND-OR | 0 | |||
 Vyrian | 2SA970-BL | Toshiba America Electronic Components | Small Signal Bipolar Transistor, 0.1A I(C), 120V V(BR)CEO, 1-Element, PNP, Silicon, TO-92 RoHS : Not Compliant | 3,150 | ||
| 22V10-30BLA | NXP Semiconductors | 3,050 | ||||
| MAX6480BL285BD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 3,000 | |||
| MAX6480BL28BD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, 0.21V Dropout, BICMOS, PBGA6 RoHS : Not Compliant | 3,000 | |||
| MAX6480BL31AD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 3,000 | |||
| MAX6480BL24AD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 2,850 | |||
| MAX6480BL16AD2-T | Analog Devices Inc | 2,700 | ||||
| MAX6480BL32BD2 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 2,450 | |||
| MAX6480BL21AD4-T | Analog Devices Inc | 2,250 | ||||
| MAX6480BL29AD1-T | Analog Devices Inc | 2,000 | ||||
| MAX6480BL27AD4 | Analog Devices Inc | Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6 RoHS : Not Compliant | 1,500 | |||
| 3BOLY-00-B00BL | Intel Corporation | 630 | ||||
| 2SK170-BL(F) | Toshiba America Electronic Components | Small Signal Field-Effect Transistor | 380 | |||
| 5V62Y-00-B00BL | Intel Corporation | 310 | ||||
| 63GSK-00-B00BL | Intel Corporation | 9 | ||||
 Waytek, Inc. | CPX 100 0500 BLACK | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .500" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 6,700 | |
| CPX 100 0250 BLACK | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .250" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 4,300 | ||
| CFW 1100 BLACK LINED | ShawCor Ltd | DSG-Canusa CFW-1100 extra heavy-duty heat shrink tubing is black adhesive-lined tubing built for rugged sealing and protection of cables, splices, and terminations. Its thick-wall construction supports strong abrasion resistance, moisture sealing, and durable environmental protection in harsh applications. |
| 723 | ||
 Wuhan P&S | MMBZ5260BLT1G | onsemi | Zener Voltage Regulators 225 mW SOT23 Surface Mount RoHS : Compliant |
| 21,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand