| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
075JS2 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() ComSIT USA | RC2512JK07560RL | YAGEO Corporation | Fixed Resistor, Metal Glaze/thick Film, 1W, 560ohm, 200V, 5% +/-Tol, 100ppm/Cel, Surface Mount, 2512 RoHS : Compliant | 552,000 | ||
| NOSV477M006S0075 | Kyocera AVX Components | LOW ESR NIOBIUM OXIDE CAPACITOR Special Capacitor, Polarized, Niobium, 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2924 RoHS : Compliant | 198,225 | |||
| RC0603FR0751KL | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.1W, 51000ohm, 75V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0603 RoHS : Compliant | 33,696 | |||
| RC0402FR0753K6L | YAGEO Corporation | GENERAL PURPOSE CHIP RESISTOR Fixed Resistor, Metal Glaze/thick Film, 0.0625W, 53600ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402 RoHS : Compliant | 10,000 | |||
| SXO3050750M27.000T | PETERMANN-TECHNIK GmbH | Electronic Component RoHS : Compliant | 7,000 | |||
| RT0805BRB075K11L | YAGEO Corporation | Fixed Resistor, Thin Film, 0.125W, 5110ohm, 150V, 0.1% +/-Tol, 10ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 5,000 | |||
74HCT4075N![]() | NXP Semiconductors | TRIPLE 3-INPUT OR GATE OR Gate, HCT Series, 3-Func, 3-Input, CMOS, PDIP14 RoHS : Compliant | 2,097 | |||
| RC0402FR07590KL | YAGEO Corporation | Electronic Component RoHS : Not Compliant | 536 | |||
| MB90075P | FUJITSU Limited | Electronic Component RoHS : Not Compliant | 478 | |||
| 2153075 | TE Connectivity | TOP ENTRY, DOUBLE ROW AMP HV-100 RECEPTACLE Board Connector, 5 Contact(s), 2 Row(s), Female, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Compliant | 448 | |||
| 4075BP | NXP Semiconductors | Electronic Component RoHS : Compliant | 350 | |||
| ACU50751S3CTR | AnandTech | Electronic Component RoHS : Not Compliant | 335 | |||
| SW06PCN075 | IXYS UK Westcode | RECTIFIER DIODE STUD & FLAT BASE TYPE Rectifier Diode, 1 Phase, 1 Element, 75A, 600V V(RRM), Silicon RoHS : Not Compliant | 284 | |||
| MFSM075299 | Bourns Inc | PTC RESETTABLE FUSE PTC Resettable Fuse, 1ohm, Surface Mount RoHS : Compliant | 265 | |||
1700758![]() | Phoenix Contact | PCB TERMINAL BLOCK Barrier Strip Terminal Block, 17.5A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 50 | |||
![]() GLYN GmbH & Co. KG | 1705060750 | AAEON Technology Inc | (TF)Backlight cable.A1255H-6P(FI-S).A2001H5P(PHR). | 4 | ||
![]() Interstate Connecting Components | 10-407552-015 | Amphenol Aerospace | PCB CONTACT PIN |
| 2,441 | |
| CM075325 | MISC MIL-AERO | .325 x 2 COPPER THIMBLE | 747 | |||
| 440AS075NF4007-5K | Glenair Inc | 0 | ||||
| 440AS075NF4007-5 | Glenair Inc | BANDING BACKSHELL |
| 0 | ||
| 440AS075NF2807-5K | Glenair Inc | 0 | ||||
| 440GS075NF2507-5 | Glenair Inc | 0 | ||||
| 440AS075NF2807-5 | Glenair Inc |
| 0 | |||
| 440AS075NF4407-5 | Glenair Inc | BANDING BACKSHELL |
| 0 | ||
| TS07510D0000G | Amphenol Anytek | TS 7P 5.08 BLACK LOGO -ZINC | 0 | |||
| SP075094WE10 | TE Connectivity | E19066-000 2-1201662-3 SP075094WE10 RoHS : Compliant |
| 0 | ||
| 095-850-162L075 | Amphenol RF | BNC STRAIGHT PLUG TO HD-BNC ST | 0 | |||
| 095-850-268M075 | Amphenol RF | BNC RIGHT ANGLE PLUG TO BNC ST | 0 | |||
| 1-1761607-5 | TE Connectivity | IDC LOW PRO HDR 50P RA LG LAT BLK RoHS : Compliant |
| 0 | ||
| 140000753 | Amphenol Procom | EFD 70385-FME ANTENNAS | 0 | |||
| 10-323340-75P | Amphenol Aerospace | RECEPTACLE 10-323340-75P | 0 | |||
![]() NexGen Digital | DMP2075UFDB-7 | Diodes Incorporated | RoHS : Compliant | 89,363 | ||
| RT0402BRD075K36L | YAGEO Corporation | RoHS : Compliant | 40,000 | |||
| RC0402JR-0756RL | YAGEO Corporation | RoHS : Compliant | 14,616 | |||
| RC0402FR-075K23L | YAGEO Corporation | RoHS : Compliant | 10,561 | |||
| MBB0207-50-1%-5T-2M74 | Vishay Huntington | 5,000 | ||||
| MBB0207-50-1%-5T-2M94 | Vishay Huntington | 4,940 | ||||
| MBB0207-50-1%-5T-3M09 | Vishay Huntington | 4,940 | ||||
| CRCW1210752JRT1 | Vishay Dale | RoHS : Not Compliant | 4,829 | |||
| RC0402FR-07560KL | YAGEO Corporation | RoHS : Compliant | 1,720 | |||
| RC0603FR-075K1L | YAGEO Corporation | RoHS : Compliant | 1,114 | |||
| RC0402FR-0751KL | YAGEO Corporation | RoHS : Compliant | 1,000 | |||
| 38720-7504 | Molex | RoHS : Compliant | 911 | |||
CD4075BE![]() | Texas Instruments | RoHS : Compliant | 800 | |||
| UMPS-06-07.5-T-V-S-TR | Samtec Inc | RoHS : Compliant | 500 | |||
| TPSV227K016R0075 | KYOCERA Corporation | 6 | ||||
![]() PEI Genesis | 075-8509-000 | ITT Interconnect Solutions | RoHS : Compliant |
| 236 | |
| GTCGL08AF40-75S-023 | Amphenol Corporation |
| 0 | |||
| GTCGL08AF40-75S-023-B30 | Amphenol Corporation |
| 0 | |||
| GTCL00AF40-75P-LC | Amphenol Corporation |
| 0 | |||
| GTCL06AF40-75P-025-B30 | Amphenol Corporation |
| 0 | |||
| GTCL08AF40-75P | Amphenol Corporation |
| 0 | |||
| GTS01F40-75P-025 | Amphenol Corporation |
| 0 | |||
| GTSG08F40-75P-023-B30 | Amphenol Corporation |
| 0 | |||
| GTSGL08F40-75P-023 | Amphenol Corporation |
| 0 | |||
| GTSL06AF40-75P-023-B30 | Amphenol Corporation |
| 0 | |||
| GTSL08F40-75P-116 | Amphenol Corporation |
| 0 | |||
| ACS08A40-75S-003 | Amphenol Corporation |
| 0 | |||
| ACS08AF40-75S-003 | Amphenol Corporation |
| 0 | |||
| GTS06AF40-75P-025-B30 | Amphenol Corporation |
| 0 | |||
| GTSL00AF40-75P | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 3-292207-5 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 396 | |
| TW-08-06-T-S-515-075 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 262 | ||
| TW-05-03-G-D-315-075 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 245 | ||
| 608507-5 | TE Connectivity | Connectors |
| 179 | ||
| TMS-107-55-L-S | Samtec Inc | Through-hole Micro Header, 0.050" x 0.10 RoHS : Compliant |
| 172 | ||
| TW-13-03-L-D-315-075 | Samtec Inc | Flexible Micro Board Stacking Header, 0. RoHS : Compliant |
| 152 | ||
| TW-10-04-LM-D-370-075 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 133 | ||
| 2170752-7 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 126 | ||
| DWM-07-57-G-S-400 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 106 | ||
| DWM-07-58-L-D-429 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 96 | ||
| TW-30-03-T-D-385-075 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 32 | ||
| AT607-5V | NKK Switches | LB ILLUM PUSHBUTTON LAMP |
| 12 | ||
| 282100-75 | Amphenol RF | 1.0-2.3 Right Angle PCB Jack 75 Ohm Bulk |
| 11 | ||
| 21-900075-082 | Amphenol Corporation | CONNECTOR |
| 8 | ||
| 2455R--90750751 | Honeywell Sensing and Control | Switch |
| 7 | ||
![]() Chip 1 Exchange | NANOSMDC075F-2![]() | Littelfuse Inc | INSTOCK RoHS : Compliant | 241,004 | ||
| RC0603FR-075K11 | YAGEO Corporation | INSTOCK RoHS : Compliant | 9,347 | |||
| SMA0207 50 6K34 | Vishay Draloric | INSTOCK | 6,000 | |||
| RC0603FR-0752R3 | INSTOCK | 5,000 | ||||
| SMA02075075K1%A2 | INSTOCK | 3,900 | ||||
| RC0402FR-0754K9L | INSTOCK | 2,559 | ||||
| B72210S0750K101 | TDK Electronics | INSTOCK RoHS : Compliant | 2,355 | |||
| 1-1761607-5 | INSTOCK | 1,000 | ||||
| RC0402FR-07576KL | YAGEO Corporation | INSTOCK RoHS : Compliant | 500 | |||
| N7E50-7516VU-20 | 3M | INSTOCK | 400 | |||
| SMM0207-50-75B-1%BP | Vishay Intertechnologies | INSTOCK | 355 | |||
| RC0402FR-0754K9L | YAGEO Corporation | INSTOCK RoHS : Compliant | 232 | |||
| 13.07.524 | ETTGR | INSTOCK | 136 | |||
| D75004CU075N89 | NECEL | INSTOCK | 6 | |||
| 282100-75 | Amphenol Corporation | INSTOCK RoHS : Compliant | 1 | |||
![]() Avnet Asia | 0680L0750-05 | Bel Fuse | SMD Fuse, Slow Blow, 750 mA, 125 VAC, 125 VDC, 2410 [6125 Metric], 0680L (Alt: 0680L0750-05) RoHS : Compliant |
| 25,000 | |
| 968075-2 | TE Connectivity | Contact SKT Crimp ST Cable Mount Strip (Alt: 968075-2) RoHS : Compliant |
| 12,000 | ||
| T0603FF0750TM | AEM Inc | (Alt: T0603FF0750TM) RoHS : Compliant | 8,000 | |||
| GMLB-160808-0075B-N7A-EH | Pulse Electronics Corporation | PULGMLB-160808-0075B-N7A-EH CHILISIN IND (Alt: GMLB-160808-0075B-N7A-EH) RoHS : Compliant |
| 4,000 | ||
| 10075025-G01-10ALF | Amphenol Corporation | (Alt: 10075025-G01-10ALF) RoHS : Compliant |
| 3,250 | ||
| 0751.0099 | Schurter Electronic Components | (Alt: 0751.0099) RoHS : Compliant |
| 2,000 | ||
| UE36-A1075-3100T | Amphenol Corporation | AHLUE36-A1075-3100T 56G QSFP-DD SMT CONN (Alt: UE36-A1075-3100T) RoHS : Compliant |
| 1,200 | ||
| BPMI0011085075NK0E | Pulse Electronics Corporation | (Alt: BPMI0011085075NK0E) RoHS : Compliant |
| 1,000 | ||
| 10147126-107500ULF | Amphenol Corporation | FCI10147126-107500ULF EXAMEZZ 4X25 7.5MM (Alt: 10147126-107500ULF) RoHS : Compliant |
| 200 | ||
| NTH4L075N065SC1 | onsemi | Silicon Carbide MOSFET, Single, N Channel, 38 A, 650 V, 85 MilliOhms, TO-247, 4 Pins (Alt: NTH4L075N065SC1) RoHS : Compliant |
| 84 | ||
| 10-PC124PA075ME01-L637F26Y | MACOM | MCM10-PC124PA075ME01-L637F26Y FASTPACK 0 (Alt: 10-PC124PA075ME01-L637F26Y) RoHS : Compliant |
| 50 | ||
| 10179075-101JLF | Amphenol Corporation | (Alt: 10179075-101JLF) RoHS : Compliant |
| 32 | ||
| FTR-107-51-S-D-06 | Samtec Inc | (Alt: FTR-107-51-S-D-06) RoHS : Compliant |
| 5 | ||
| 2499075-3 | TE Connectivity | VERTICAL BUS BAR 48V 720A HPR NEXT (Alt: 2499075-3) RoHS : Compliant |
| 5 | ||
| ST250-75L2MI | Vishay Intertechnologies | (Alt: ST250-75L2MI) RoHS : Compliant | 0 | |||
![]() Avnet Silica | DMN6075S-7 | Diodes Incorporated | Power MOSFET N Channel 60 V 2 A 0069 ohm SOT23 Surface Mount (Alt: DMN6075S-7) RoHS : Compliant | 660,000 | ||
PCT2075TP,147![]() | NXP Semiconductors | Temperature Sensor IC Digital 1C 55 C 125 C HWSON 8 Pins (Alt: PCT2075TP,147) RoHS : Compliant | 56,000 | |||
| SP3075EEN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 3 V to 36 V 8 Pins NSOIC (Alt: SP3075EEN-L/TR) RoHS : Compliant | 37,500 | |||
PCT2075D,118![]() | NXP Semiconductors | Temperature Sensor IC Digital 1C 55 C 125 C SOIC 8 Pins (Alt: PCT2075D,118) RoHS : Compliant | 7,500 | |||
PCT2075DP,118![]() | NXP Semiconductors | Temp Sensor DigitalOUT I2C 8Pin TSSOP TR (Alt: PCT2075DP,118) RoHS : Compliant | 5,000 | |||
| DMN2075UDW-7 | Diodes Incorporated | (Alt: DMN2075UDW-7) RoHS : Compliant | 3,000 | |||
| PSMP075N15NS1_T0_00601 | PanJit Semiconductor | PJ075N15NSTPHF005KTO220ABLMOSTONFET150CTMNHNF150QI02PJ (Alt: PSMP075N15NS1_T0_00601) RoHS : Compliant | 3,000 | |||
BUK9Y30-75B,115![]() | Nexperia | Trans MOSFET NCH 75V 34A 5Pin4Tab LFPAK TR (Alt: BUK9Y30-75B,115) RoHS : Compliant | 1,500 | |||
PCT2075GVH![]() | NXP Semiconductors | (Alt: PCT2075GVH) RoHS : Compliant | 0 | |||
| UJ4N075004Z | onsemi | (Alt: UJ4N075004Z) RoHS : Compliant | 0 | |||
| NCP1075P065G | onsemi | (Alt: NCP1075P065G) RoHS : Compliant | 0 | |||
| UJ4C075033L8S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC 33 mohm 750VTOLL (Alt: UJ4C075033L8S) RoHS : Compliant | 0 | |||
| DMP2075UFDB-7 | Diodes Incorporated | (Alt: DMP2075UFDB-7) RoHS : Compliant | 0 | |||
| EQCO-SDI-30-7502 | Microchip Technology Inc | HDSDI Repeater ASMB Box (Alt: EQCO-SDI-30-7502) RoHS : Compliant | 0 | |||
| R9A07G075M28GBA#AC0 | Renesas Electronics Corporation | (Alt: R9A07G075M28GBA#AC0) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | FXR.07.52.0075X.A.DG | Taoglas Antenna Solutions | FXR.07.52.0075X.A.dg Circular NFC Flex antenna with 75mm Twisted Pair 28AWG cable and ACH(F) |
| 0 | |
FXR.07.52.0075X.A![]() | Taoglas Antenna Solutions | FXR.07.52.0075X.A Circular NFC Flex antenna with 75mm Twisted Pair 28AWG cable and ACH(F),50*45.5*0.24mm RoHS : Compliant |
| 0 | ||
| 3990150751 | Telit |
| 0 | |||
| FXC.24.52.0075X.A.DG | Taoglas Antenna Solutions | NFC Flex Antenna 24mm Circle with Ferrite Layer and 75mm Twisted Pair 28AWG cable and ACH(F) |
| 0 | ||
| AMA24AR1-240075Y | Aimtec |
| 0 | |||
| AMA24ER5-240075Y | Aimtec |
| 0 | |||
| AMA90DR4L-120075Y | Aimtec | RoHS : Compliant |
| 0 | ||
| AMA24ER4L-240075Y | Aimtec |
| 0 | |||
| AMA24BR3L-240075Y | Aimtec |
| 0 | |||
| AMA90DR5-120075Y | Aimtec | RoHS : Compliant |
| 0 | ||
| QC9075-1AN-JXT | Lantronix Inc | Open-Q 9075IQ SOM (36GB) TAA |
| 0 | ||
| AISC-0603-R0075G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMA24BK1-240075Y | Aimtec |
| 0 | |||
| AMA24BR2-240075Y | Aimtec |
| 0 | |||
| AMA24BR5-240075Y | Aimtec |
| 0 | |||
![]() Component Electronics, Inc | SMA0207-50-200K-1%-R5 | Vishay Draloric | IN STOCK SHIP TODAY | 3,930 | ||
| SMA0207-50-4K99-1%-R5 | Vishay Draloric | IN STOCK SHIP TODAY | 3,800 | |||
| CR10-75R0F-T | KYOCERA Corporation | IN STOCK SHIP TODAY |
| 700 | ||
| 1075075 | IMS CONNECTI | IN STOCK SHIP TODAY |
| 500 | ||
| 5607-54 | Seastrom Mfg | IN STOCK SHIP TODAY |
| 386 | ||
| 608507-5 | TE Connectivity | IN STOCK SHIP TODAY |
| 287 | ||
| CMF-50-750-1%T-2B14 | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| N7E50-7516PG-20 | 3M | IN STOCK SHIP TODAY |
| 92 | ||
| TA0755A | Tai-Saw Technology Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant | 50 | |||
| 107-50 | Calmark | IN STOCK SHIP TODAY |
| 44 | ||
| 38720-7505 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 13 | ||
| PWC-4075C-72140753 | NEC Electronics Group | IN STOCK SHIP TODAY | 5 | |||
| PWC-4075B-72140751 | NEC Electronics Group | IN STOCK SHIP TODAY | 5 | |||
| PWC-4075C-72140751 | NEC Electronics Group | IN STOCK SHIP TODAY | 4 | |||
| PWC-4075B-72140753 | NEC Electronics Group | IN STOCK SHIP TODAY | 3 | |||
![]() DB Roberts | 13RS075075B | Essentra Components | ROUND SPACER, .320 ID, .750 OD | 0 | ||
| 07555-00758 | Avdel | 0 | ||||
| 075075000001 | Essentra Components | 0 | ||||
| AC-C0H0-4-0750-075 | Southco | 0 | ||||
| 07555-00754 | Avdel | 4 UN DRIVE SHAFT | 0 | |||
| 13RS075075 | Essentra Components | ROUND SPACER, .320 ID, .750 OD | 0 | |||
| 07555-00756 | Avdel | 0 | ||||
| 090632075T | Essentra Components | KNURLED THUMB SCREW, 6-32 THRE | 0 | |||
| 0931218075TB | Essentra Components | KNURLED THUMB SCREW, 516-18 TH | 0 | |||
| 17W07510 | Essentra Components | FLAT WASHER, .530 ID, .750 OD, | 0 | |||
| 17W07523B | Essentra Components | FLAT WASHER, .260 ID, .745 OD, | 0 | |||
| 13RS075009 | Essentra Components | ROUND SPACER, .320 ID, .750 OD | 0 | |||
| 13RS075052B | Essentra Components | ROUND SPACER, .250 ID, .750 OD | 0 | |||
| 13RS075054 | Essentra Components | ROUND SPACER, .380 ID, .750 OD | 0 | |||
| 13RS075089B | Essentra Components | ROUND SPACER, .390 ID, .750 OD | 0 | |||
![]() EBV Elektronik | PCT2075TP,147![]() | NXP Semiconductors | Temperature Sensor IC Digital 1C 55 C 125 C HWSON 8 Pins (Alt: PCT2075TP,147) RoHS : Compliant | 300,000 | ||
| TDSR0750 | Vishay Intertechnologies | DISPLAY 7SEG 7MM RED LC CAe4 (Alt: TDSR0750) RoHS : Compliant | 39,000 | |||
IPP075N15N3GXKSA1![]() | Infineon Technologies AG | Transistor MOSFET NCH 150V 100A 3Pin TO220 Tube (Alt: SP000680832) RoHS : Compliant | 25,000 | |||
| NTH4L075N065SC1 | onsemi | Silicon Carbide MOSFET Single N Channel 38 A 650 V 85 MilliOhms TO247 4 Pins (Alt: NTH4L075N065SC1) RoHS : Compliant | 11,250 | |||
| IRS20752LTRPBF | Infineon Technologies AG | MOSFET Driver High Side 10 V to 18 V supply 160 mA out 215 ns delay SOT236 (Alt: SP001548576) RoHS : Compliant | 3,000 | |||
| UJ4SC075005L8S | onsemi | Silicon Carbide MOSFET Single N Channel 120 A 750 V 54 mohm MO299 (Alt: UJ4SC075005L8S) RoHS : Compliant | 2,000 | |||
| UJ4SC075018L8S | onsemi | Silicon Carbide SiC Cascode JFET EliteSiC18 mohm 750VTOLL (Alt: UJ4SC075018L8S) RoHS : Compliant | 2,000 | |||
| SIHK075N60E-T1-GE3 | Vishay Intertechnologies | (Alt: SIHK075N60E-T1-GE3) RoHS : Compliant | 2,000 | |||
| BXEB-L0340U-30G0750-C-C3 | Bridgelux Inc | Linear LED Module 68 LEDs Screw Mount Tray (Alt: BXEB-L0340U-30G0750-C-C3) RoHS : Compliant | 1,680 | |||
| UJ4C075033B7S | onsemi | Silicon Carbide MOSFET Single N Channel 44 A 750 V 0041 ohm TO263 D2PAK (Alt: UJ4C075033B7S) RoHS : Compliant | 800 | |||
| NVBG075N065SC1 | onsemi | Silicon Carbide MOSFET Single N Channel 37 A 650 V 85 MilliOhms TO263 D2PAK 7 Pins (Alt: NVBG075N065SC1) RoHS : Compliant | 800 | |||
| FP11075_LISA2-M-CLIP | LEDIL | LENS ROUND 1 POS 99MM OD 68MM H (Alt: FP11075_LISA2-M-CLIP) RoHS : Compliant | 800 | |||
| UJ4C075023K4S | onsemi | Silicon Carbide MOSFET Single N Channel 66 A 750 V 23 mohm TO247 (Alt: UJ4C075023K4S) RoHS : Compliant | 600 | |||
| IT FIT 120/220-240/750 D CS L | Inventronics (Hangzhou) Inc | 6977078991735 IT FIT 120220240750 D CS L old PN 4062172317245 (Alt: 6977078991735) RoHS : Compliant | 400 | |||
| FXR.07.52.0075X.A.DG | Taoglas Antenna Solutions | Internal Antenna Flexible PCB Single Band 1356 MHz Adhesive Mount (Alt: FXR.07.52.0075X.A.DG) RoHS : Compliant | 0 | |||
![]() Flip Electronics | FDP075N15A−F102 | onsemi | Stock | 94,400 | ||
| NCP151AAMX180075TCG | onsemi | Stock, Ship Today RoHS : Compliant |
| 61,200 | ||
| NCP1075BAP065G | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,450 | ||
| NCP1075P130G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,750 | ||
| UJ4C075044L8S | onsemi | Stock, Ship Today RoHS : Compliant | 4,000 | |||
| UJ4C075023K4S | onsemi | Stock, Ship Today RoHS : Compliant |
| 3,000 | ||
| UJ4C075033B7S-D | onsemi | Stock, Ship Today | 1,600 | |||
| R9A07G075M01GFA#AA0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 732 | |||
| R9A07G075M24GBA#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 660 | |||
| R9A07G075M01GFP#AA0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 657 | |||
| R9A07G075M27GBA#AC0 | Renesas Electronics Corporation | Stock RoHS : Compliant | 621 | |||
| IXTA230N075T2-7 | Littelfuse Inc | Stock RoHS : Compliant | 500 | |||
| NCP1075BAP100G | onsemi | Stock, Ship Today RoHS : Compliant |
| 100 | ||
| IXTX240N075L2 | Littelfuse Inc | Stock RoHS : Compliant | 90 | |||
| UJ4C075033K3S | onsemi | Stock, Ship Today RoHS : Compliant |
| 25 | ||
![]() Neutron USA | 1607581 | Phoenix Contact | Circular Metric Connectors ST-06KS020 RoHS : Compliant |
| 50 | |
| CFM-4020CF-075-306-20 | CUI Inc | DC Fans dc axial fan, 40 mm square, 20 mm, 5 Vdc, omniCOOL, 7500 RPM, 9.38 CFM, TS |
| 50 | ||
| NSP-150-7.5 | Mean Well | Switching Power Supplies 150W 7.5V 20A 85-305Vac W/PFC ITE 62368-1, Medical 60601-1, Industrial 61558-1/2-16/61010-1 RoHS : Compliant |
| 40 | ||
| HRP-600-7.5 | Mean Well | Switching Power Supplies 600 7.5V 80A ACTIVE PFC FUNCTION RoHS : Compliant |
| 37 | ||
| 2807599 | Phoenix Contact | Industrial Surge Protectors VAL-MS 230 IT ST RoHS : Compliant |
| 19 | ||
| CAP-50/7.5/440R | Littelfuse Inc | Motor Start Capacitors & Motor Run Capacitors 50+7.5 MFD 370/440V ROUND CAP RoHS : Unknown |
| 6 | ||
| 4000-75800-1715024 | Murrelektronik GmbH | Led, Machine Lamp, Ip54, 24Vdc, M8 Connecton, 24W, Modlight Illumix Slim Line |
| 3 | ||
1407501![]() | Phoenix Contact | Network cable, CAT5, Str M12 M 4p to Str RJ45 M 8p4c, 4wire 5m, PVC Green, NBC-MSD/ 5,0-93B/R4AC SCO RoHS : Compliant |
| 0 | ||
| 1407583 | Phoenix Contact | Circular Connector, R/A M8 M 3pos, Screw conn, cable dia 3.5-5mm, SACC-M 8MR-3CON-M-SW RoHS : Compliant |
| 0 | ||
| 2907558 | Phoenix Contact | Circuit Breakers TMC 81C 01A RoHS : Compliant |
| 0 | ||
| 1940750000 | Weidmüller Interface GmbH & Co. KG | Pluggable Terminal Blocks BCZ 3.81/04/180 SN OR BX RoHS : Compliant |
| 0 | ||
| WSX075-3200-R | Triad Magnetics | Wall Mount AC Adapters Wallplug, 100-240Vac 7.5Vdc, Level VI, - |
| 0 | ||
| CBMWD5075 | StarTech | SLOTTED WIRING CABLE REACEWAY DUCT - 50 X 75MM (MOQ required due to dimensional issue) |
| 0 | ||
| AA075845-AX | Axiom Manufacturing | AXIOM 16GB DDR4-2666 SODIMM FOR DELL - AA075845 |
| 0 | ||
| 84307-510-508 PPL KIT | PacTec | Enclosures, Boxes, & Cases 4.35x2.74x1.1" Gray PPL Kit w/Gray Sides |
| 0 | ||
![]() Pasternack Enterprises US | PE7075 | Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Male, Connector In Impedance: 50 Ohm, Connector Out Series: F, Connector Out Gender: Male, Connector Out Impedence: 75 Ohm, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Maximum VSWR: 1.25:1, Maximum Attenuation: 5.7 dB. 50 Ohm SMA Male To 75 Ohm F Male Matching Pad Operating From DC to 3 GHz RoHS Compliant. RF impedance matching pad (also referred to as coaxial matching pad) PE7075 from Pasternack has SMA connector in and is 50 Ohm, F connector out and is 75 Ohm. This coaxial SMA to F impedance matching pad has a male SMA in and a male F out. Our 50 Ohm SMA to 75 Ohm F impedance matching pad is manufactured with a minimum frequency of DC and a maximum frequency of 3 GHz. This radio frequency 50 Ohm SMA male to 75 Ohm F male RF impedance matching pad design has a maximum attenuation of 5.7 and an attenuation accuracy of 0.5 dB. Body material of the 50 Ohm to 75 Ohm SMA To F matching pad is passivated stainless steel. 50 Ohm SMA male to 75 Ohm F male RF impedance pad PE7075 from Pasternack is rated for a maximum VSWR of 1.25:1 and a maximum input power of 2 Watts. This matching pad is just part of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This impedance matching pad with SMA to F connectors is in-stock and Pasternack is where to buy your RF components for same day shipping throughout the United States and internationally, as with all other Pasternack radio frequency parts. |
| 61 | |
| PEWAN075-20ELNF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 20 dBi gain, End Launch N Female connector. The PEWAN075-20ELNF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with a type N female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PEWAN075-20ELNF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 8.68 inches, a width of 3.67 inches, and a weight of 0.52 lbs. This WR-75 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 43 | ||
| PEWAN075-10ELNF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 10 GHz, Frequency, Max: 15 GHz. WR-75 Standard Gain Horn with 10 dBi gain, End Launch N Female connector. The PEWAN075-10ELNF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-75 input and a waveguide to coaxial transition adapter. Our WR-75 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-75 standard gain horn antenna with a type N female input has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. Pasternack’s PEWAN075-10ELNF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 2.73 inches, a width of 1.51 inches, and a weight of 0.22 lbs. This WR-75 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 5 | ||
| PE3C10757-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to SSMC Plug Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10757-18 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757-18 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757-18 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10757-18 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10757-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.85mm Male to SSMC Plug Cable 6 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10757-6 1.85mm male to SSMC plug RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to SSMC plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and an SSMC cable connection on the other. Our 1.85mm to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10757-6 can also be known as a 1.85mm plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to SSMC plug cable has a maximum VSWR of 1.4:1. This PE3C10757-6 1.85mm plug to SSMC male cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to SSMC cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications, and CAD drawings for this 6-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10757-6 can also be used in the other direction and will be an SSMC plug to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to SSMC cable assembly for quick shipment worldwide. Variations of 1.85mm and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to SSMC RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10750-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 2.92mm Female 4 Hole Flange Cable 18 Inch Length Using PE-SR405FL Coax., Pasternack’s PE3C10750-18 1.85mm male to 2.92mm female 4 hole flange mount RF cable assembly using PE-SR405FL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.92mm 4 hole flange mount cable connection on the other. Our 1.85mm to 2.92mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10750-18 can also be known as a 1.85mm plug to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.78-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. Our 1.85mm male to 4 hole flange mount 2.92mm female cable has a maximum VSWR of 1.4:1. This PE3C10750-18 1.85mm plug to 2.92mm jack cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the solder/non-solder contact attachment method and a stainless steel body with gold plating. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10750-18 can also be used in the other direction and will be a 2.92mm female 4 hole flange mount to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.92mm jack 4 hole flange mount cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.92mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3W07522 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Mini UHF Male to UHF Female Cable Using LMR-195 Coax. PE3W07522 is a Mini UHF male to UHF female cable using LMR-195 coax. This Pasternack Mini UHF male to UHF female cable assembly uses a 50 Ohm Mini UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male Mini UHF to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07522 Mini UHF male to UHF female cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W07559 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMB Plug Cable Using PE-P195 Coax. PE3W07559 is a SMA male right angle to SMB plug cable using PE-P195 coax. This Pasternack SMA male right angle to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. SMA right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07559 SMA male right angle to SMB plug cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W10753 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Cable Using RG58 Coax. PE3W10753 is a SMA male to TNC male cable using RG58 coax. This Pasternack SMA male to TNC male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10753 SMA male to TNC male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W10759/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W07521 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using PE-C200 Coax. PE3W07521 is a N female bulkhead to SMA male cable using PE-C200 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07521 N female bulkhead to SMA male cable assembly is constructed with PE-C200 coax. | 0 | |||
| PE3W10752 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Low Loss Cable Using PE-C195 Coax., Radio frequency assembly SMA male to SMA female low loss cable using PE-C195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable using PE-C195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10752 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W10752 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3W10752 is built with PE-C195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W10752 can also be used in the other direction and will be a SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. | 0 | |||
| PE3W00759/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Male to N Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W00759/HS can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00759/HS RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Type N plug to type N plug cable assembly PE3W00759/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE3W07518LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Push-On SMP Female to SMA Male Cable Using PE-SR405FLJ Coax with HeatShrink, LF Solder., Radio frequency assembly push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP cable connection on one end and SMA cable connection on the other. Our SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This SMP to SMA cable is a female to male coax assembly, PE3W07518LF/HS, can also be known as a SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. SMP jack to SMA plug cable assembly PE3W07518LF/HS is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07518LF/HS can also be used in the other direction and will be SMA male to SMP female cable assembly if the opposite connectivity is required. SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMA cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female to SMA male cable using PE-SR405FLJ coax with heatshrink, LF solder. | 0 | |||
| PE3W07594/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. UHF Male to UHF Female Cable Using RG225 Coax with HeatShrink. PE3W07594/HS is a UHF male to UHF female cable using RG225 coax. This Pasternack UHF male to UHF female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male UHF to female UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07594/HS UHF male to UHF female cable assembly is constructed with RG225 coax. | 0 | |||
![]() Teledyne HiRel | M38510/75002B2A![]() | Teledyne HiRel | NAND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | ||
| M38510/75603BRA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
M38510/75704B2A![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75003BCA | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
M38510/75101BDA![]() | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/75403BSA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, TRANSPARENT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
| M38510/75704BSA | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/75204BDA![]() | Teledyne HiRel | AND GATE, TRIPLE 3-INPUT RoHS : Not Compliant | 0 | |||
M38510/75601BRA![]() | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLEAR RoHS : Not Compliant | 0 | |||
M38510/75702B2A![]() | Teledyne HiRel | HEX INVERTER, SCHMITT TRIGGER RoHS : Not Compliant | 0 | |||
M38510/75203BCA![]() | Teledyne HiRel | AND GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| M38510/75603BSA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
M38510/75705BZA![]() | Teledyne HiRel | BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
M38510/75701B2A![]() | Teledyne HiRel | HEX INVERTER RoHS : Not Compliant | 0 | |||
M38510/75201BCA![]() | Teledyne HiRel | OR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
![]() Vyrian | XG4A-6075 | OMRON Corporation | Board Connector RoHS : Compliant | 11,296 | ||
| XG4A-1075 | OMRON Corporation | Board Connector RoHS : Compliant | 11,126 | |||
| XG4A-5075 | OMRON Corporation | Board Connector RoHS : Compliant | 10,733 | |||
| XLS204XD0750-11 | Broadcom Limited | 9,574 | ||||
| XLS108XD0750-11 | Broadcom Limited | 9,559 | ||||
| XLS018XD0750-11 | Broadcom Limited | 9,115 | ||||
| XLS208WD0750-11 | Broadcom Limited | 8,092 | ||||
| XLS104XD0750-11 | Broadcom Limited | 8,017 | ||||
| XLS208XD0750 | Broadcom Limited | 5,661 | ||||
| XLS208XD0750-11 | Broadcom Limited | 5,373 | ||||
| XLS208WD0750 | Broadcom Limited | 3,733 | ||||
| XLS208SXD0750-11 | Broadcom Limited | 3,580 | ||||
| Y00751R00000D9L | Vishay Precision Group Inc | Fixed Resistor, Metal Foil, 0.3W, 1ohm, 300V, 0.5% +/-Tol, 8ppm/Cel, 3011 RoHS : Compliant | 870 | |||
| Y00751K00000T9L | Vishay Intertechnologies | Fixed Resistor, Metal Foil, 0.3W, 1000ohm, 300V, 0.01% +/-Tol, 8ppm/Cel, 3011 RoHS : Compliant | 694 | |||
| Y0075100R000T0L | Vishay Intertechnologies | Fixed Resistor, Metal Foil, 0.3W, 100ohm, 300V, 0.01% +/-Tol, 8ppm/Cel, 3011 RoHS : Not Compliant | 300 | |||
![]() Waytek, Inc. | AL-07-50-8-C | Advanced Cable Ties Inc | ACT AL-07-50-8-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 29,000 | |
| AL-07-50-13-C | Advanced Cable Ties Inc | ACT AL-07-50-13-C nylon cable tie is a 7.56" self-locking tie with 50 lb. tensile strength for bundling wire, cable, hoses, and tubing. Its one-piece nylon construction supports reliable general-purpose fastening and color-based identification in harness and panel applications. |
| 23,200 | ||
| 19056-0075 | Molex | 16-14 GA 5/16" Ring Terminal Non-Insulated Brazed Seam |
| 15,515 | ||
| 22CC50D0750B | Essentra Components | 3/4" Cable Clamp Black Size 10 Stud 1/2" Wide |
| 10,458 | ||
| AL-07-50-CW-0-C | Advanced Cable Ties Inc | ACT AL-07-50-CW-0-C cold weather cable tie is a UV black nylon tie rated 50 lb. with a 7.5" length and 1.875" max bundle diameter. It is engineered for -40F to 165F operation, resists impact and UV exposure, and helps prevent cracking or breaking in severe cold-weather installations. |
| 4,100 | ||
| 033707.5PX2S | Littelfuse Inc | 7.5A Micro3 Fuse 32VDC Dark Brown -40C TO 125C LIKE BUSSMANN ATL 46144 RoHS : Compliant |
| 2,400 | ||
| SDN0.75BK 250 | Techflex Inc | Techflex SDN0.75BK 250 Flexo Super Duty Braided Sleeving is black 3/4" nylon sleeving on a 250' spool. It features 20 mil braided construction, fits expansion ranges from 3/4" to 1-1/4", and resists gasoline, UV, solvents, salt water, and chemicals for high-abrasion applications. |
| 2,000 | ||
| FGL0.75BK | Techflex Inc | Techflex FGL0.75BK Insultherm Tru-Fit Ultra High Temperature Fiberglass Sleeving is black 3/4" woven fiberglass on a 50' spool. It is UL recognized to VW-1 flame retardant and rated from -94F to 1200F for insulating hydraulic lines and electrical systems in high-heat environments. RoHS : Compliant |
| 1,000 | ||
| 4200750OR00R2 | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is orange tubing with a .750" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 900 | ||
| 0ATO07.5MXGLO | Littelfuse Inc | 7.5A ATO LED SmartGlow Brown Fuse 12V |
| 875 | ||
| 5550750BK00R2 | ShawCor Ltd | DSG-Canusa 5550750BK00R2 CPA-300 heat shrink tubing is black adhesive-lined tubing with a .750" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 700 | ||
| 4200750RD0048 | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is red tubing with a 3/4" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 678 | ||
| 5550750RD00R2 | ShawCor Ltd | DSG-Canusa 5550750RD00R2 CPA-300 heat shrink tubing is red adhesive-lined tubing with a .750" size for sealing and protecting cables, splices, and terminations. Its heavy-duty adhesive-lined construction supports strong moisture resistance, abrasion protection, and durable environmental sealing. |
| 200 | ||
| 4200750CL0048 | ShawCor Ltd | DSG-Canusa CPX-100 polyolefin heat shrink tubing is clear tubing with a .750" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications. |
| 195 | ||
| NPG-0751G | Thomas & Betts | Quick Conn Cable Gland,Nylon Thread Size 3/4", Cable Range 13-18mm,Insert Length 10mm,Gry |
| 17 | ||
![]() Win Source Electronics | DMN6075S-7 | Diodes Incorporated | MOSFET N-CH 60V 2A SOT23-3 RoHS : Compliant |
| 225,000 | |
| BQ24075TRGT | Texas Instruments | Li-Ion/Li-Pol Charger IC 1.5A 16-VQFN |
| 66,666 | ||
| RC0402JR-07560RL | YAGEO Corporation | RES 560 OHM 5% 1/16W 0402 / 560 Ohms ±5% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 52,000 | ||
BQ24075RGTT![]() | Texas Instruments | IC LI-ION CHARGE/PWR MGMT 16-QFN RoHS : Compliant |
| 45,000 | ||
| RC0603JR-07560RL | YAGEO Corporation | RES 560 OHM 5% 1/10W 0603 / 560 Ohms ±5% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 40,000 | ||
| NCP1075STCT | onsemi | Offline Switcher 100kHz SOT-223 |
| 30,000 | ||
| 1812L075PR-0.75A | Littelfuse Inc |
| 25,000 | |||
TPS3707-50DR![]() | Texas Instruments | IC 4.55V PROCESSOR MON 8-SOIC RoHS : Compliant |
| 20,000 | ||
CD4075BM96![]() | Texas Instruments | IC GATE OR 3CH 3-INP 14-SOIC RoHS : Compliant |
| 20,000 | ||
| RT0603DRD07560RL | YAGEO Corporation | RES SMD 560 OHM 0.5% 1/10W 0603 / 560 Ohms ±0.5% 0.1W, 1/10W Chip Resistor 0603 (1608 Metric) Thin Film RoHS : Compliant |
| 10,760 | ||
| MAX20075ATCB/V+T | Maxim Integrated Products | DC to DC Converter Synchronous Mini Buck 3.5V to 36V 12-Pin TDFN T/R |
| 9,340 | ||
| MIC2075-2YM | Microchip Technology Inc | IC DISTRIBUTION SW SGL 8-MSOP RoHS : Compliant |
| 3,980 | ||
| MT40A512M16JY-075E:B | Micron Technology Inc | IC DRAM 8G PARALLEL 1.33GHZ RoHS : Compliant |
| 2,972 | ||
| MT40A256M16GE-075E:B | Micron Technology Inc | IC DRAM 4GBIT PARALLEL 96FBGA RoHS : Compliant |
| 2,341 | ||
| MAX4454EUD-TG075 | Maxim Integrated Products |
| 520 | |||
![]() Wuhan P&S | NCP81075MNTXG | onsemi | 180V,4A,High Side/Low Side Gate Driver RoHS : Compliant |
| 128,000 | |
| FDP075N15A-F102 | onsemi | N-CH PowerTrench MOSFET 150V,130A,7.5m�� RoHS : Compliant |
| 24,000 | ||
| NCP374MU075TXG | onsemi | Overvoltage Up to +30V and Down to -30V with Load Switch Function RoHS : Compliant |
| 9,000 | ||
IPP075N15N3G![]() | Infineon Technologies AG | 150V,100A,N Channel Power MOSFET RoHS : Compliant |
| 5,000 | ||
| NCP1075STAT3G | onsemi | 700V,65KHZ,High Voltage Switching Regulator for Offline SMPS RoHS : Compliant |
| 4,000 | ||
| UJ4C075044K4S | onsemi | Silicon Carbide (SiC) Cascode JFET RoHS : Compliant |
| 600 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |