| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0691G-SH2-R nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | CRCW120691K0JNEA | Vishay Dale | RES SMD 91K OHM 5% 1/4W 1206 RoHS : Contact Manufacturer |
| 5,026 | |
| CRCW120691K0JNEA | Vishay Dale | RES SMD 91K OHM 5% 1/4W 1206 RoHS : Contact Manufacturer |
| 5,026 | ||
| CRCW120691K0JNEA | Vishay Dale | RES SMD 91K OHM 5% 1/4W 1206 RoHS : Contact Manufacturer |
| 5,026 | ||
| 940691-C2 | Elesa SPA | MRT-SST-P (INCH SIZES), ADJUSTAB |
| 50 | ||
| 17-200691 | Amphenol CONEC | CBL USB2.0 A PLUG-A PLUG W/COUPL |
| 19 | ||
| 2006-9183 | H&H Industrial Products Inc | F ADJ BLADE REAMER (25/32-27/32) |
| 18 | ||
| 102010691 | Seeed Development Ltd | XIAO MG24 SENSE PRE-SOLDERED |
| 14 | ||
| 0151670691 | Molex | FFC 1.00 TYPE A 3 CKTS LGT 178 |
| 14 | ||
| 2006-9174 | H&H Industrial Products Inc | #5/A ADJ BLADE REAMER 11/32-3/8 |
| 12 | ||
| 7100069134 | MAGELLAN DISTRIBUTION | DISC ALUMINUM OXIDE P100 20" |
| 10 | ||
| MK-332-069-145-2200 | Molex | CONN MICRO-D PLG 69POS VERT SLDR |
| 5 | ||
| 2906917 | Phoenix Contact | PLC-APT-UI-IN RoHS : Compliant |
| 3 | ||
| 2006-9182 | H&H Industrial Products Inc | E ADJ BLADE REAMER (23/32-25/32) |
| 3 | ||
| 2006-9185 | H&H Industrial Products Inc | H ADJ BLADE REAMER 15/16~1-1/16 |
| 3 | ||
| 2130691700 | Molex | FA2 APPLICATOR - MECHANICAL FEED |
| 1 | ||
![]() Avnet Americas | 504050-0691 | Molex | Pin Header, 6 Contacts, 1 Row, 1.5mm, Gold, 3A, Right Angle, Copper Alloy, Wire-to-Board, SMT RA - Tape and Reel (Alt: 5040500691) RoHS : Compliant |
| 16,200 | |
| 770069-1 | TE Connectivity | Conn Housing PL 2 POS 6.3mm Crimp ST Individual - Bulk (Alt: 770069-1) RoHS : Compliant |
| 6,083 | ||
| 5750069-1 | TE Connectivity | Conn Shielded Miniature Circular DIN RCP 4 POS Solder RA Thru-Hole 4 Terminal 1 Port - Rail/Tube (Alt: 5750069-1) RoHS : Compliant |
| 10 | ||
| MK-332-069-145-2200 | Molex | I/O Connector, Plug, Micro-D Subminiature Connector, 69 Contacts, Gold, Beryllium Copper, Straight - Trays (Alt: MK-332-069-145-2200) RoHS : Not Compliant |
| 5 | ||
| MK-3F2-069-175-320S | Molex | I/O Connector, Plug, Micro-D Subminiature Connector, 69 Contacts, Gold, Beryllium Copper, Straight - Trays (Alt: MK-3F2-069-175-320S) RoHS : Not Compliant |
| 5 | ||
| MM-312-069-161-41WD | Molex | I/O Connector, Plug, Micro-D Sub Cable Assembly, 69 Contacts, Gold, Beryllium Copper, Cable Mount - Bulk (Alt: MM-312-069-161-41WD) RoHS : Compliant |
| 5 | ||
| BFC237590691 | Vishay Intertechnologies | General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 5100 pF, ? 5%, 600 V, 2 kV - Bulk (Alt: BFC237590691) RoHS : Compliant |
| 0 | ||
| CRCW120691R0FKEC | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120691R0FKEC) RoHS : Compliant |
| 0 | ||
| CRCW120691R0JNEAIF | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120691R0JNEAIF) RoHS : Compliant |
| 0 | ||
| HLCD-20-06.91-TR-TR-1 | Samtec Inc | - Bulk (Alt: HLCD-20-06.91-TR-TR-1) RoHS : Compliant |
| 0 | ||
| NK-2G2-069-145-TH00 | Molex | - Bulk (Alt: NK-2G2-069-145-TH00) RoHS : Not Compliant |
| 0 | ||
| D0006915 | VPG Foil Resistors | - Bulk (Alt: D0006915) RoHS : Not Compliant |
| 0 | ||
| CRCW1206910KFKEAC | Vishay Intertechnologies | CRCW Thick Film Commodity Chip Resistor 1206 Size 910K Ohm 1% 0.25 W 100 ppm/K 2-Pin SMD Paper T/R - Tape and Reel (Alt: CRCW1206910KFKEAC) RoHS : Compliant |
| 0 | ||
| CRCW1206910RJNTA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW1206910RJNTA) RoHS : Not Compliant |
| 0 | ||
| CRCW120691K0JNEC | Vishay Intertechnologies | D25/CRCW1206 200 91K 5% ET6 E3 - Tape and Reel (Alt: CRCW120691K0JNEC) RoHS : Compliant |
| 0 | ||
![]() Newark | CRCW1206910RFKEA | Vishay Intertechnologies | RES, 910R, 1%, 0.25W, 1206, THICK FILM; RoHS : Compliant |
| 5,000 | |
| MP006918 | SPC Multicomp | RES, 3K9, 0.25W, AXIAL, METAL FILM; RoHS : Compliant |
| 4,490 | ||
| CRCW120691R0FKEA. | Vishay Intertechnologies | Surface Mount Thick Film Resistor, AEC-Q; RoHS : Compliant |
| 4,390 | ||
| CRCW120691R0FKEA. | Vishay Intertechnologies | Surface Mount Thick Film Resistor, AEC-Q; RoHS : Compliant |
| 4,390 | ||
| MP006914 | SPC Multicomp | RES, 2K7, 0.25W, AXIAL, METAL FILM; RoHS : Compliant |
| 4,243 | ||
| 160691-5 | TE Connectivity | TAB, AWG22-18; RoHS : Compliant |
| 4,110 | ||
| MP006910 | SPC Multicomp | RES, 1K8, 0.25W, AXIAL, METAL FILM; RoHS : Compliant |
| 2,169 | ||
| MP006916 | SPC Multicomp | RES, 3K3, 0.25W, AXIAL, METAL FILM; RoHS : Compliant |
| 1,830 | ||
| 1825069-1 | TE Connectivity | PUSHBUTTON SWITCH BOOT SEAL, BLACK; RoHS : Compliant |
| 932 | ||
| 5-104069-1 | TE Connectivity | Board-To-Board Connector, Right Angle, A; RoHS : Compliant |
| 890 | ||
| 504520-0691 | Molex | CONNECTOR, NANO SIM, 6POS; Memory / Card Type:Nano SIM; Insert & Eject Mechanism:Push In-Pin Eject; No. of Contacts:6Contacts; Contact Material:Copper Alloy; Contact Plating:Gold Plated Contacts; Product Range:504520 Series RoHS Compliant: Yes (Alternate Part Number: 887191340531 RoHS : Compliant |
| 83 | ||
| 09185206914 | HARTING Technology Group | CONNECTOR, HEADER, 20POS, 2ROW, 2.54MM; RoHS : Compliant |
| 72 | ||
| 09185106913 | HARTING Technology Group | CONNECTOR, HEADER, 10POS, 2ROW, 2.54MM; RoHS : Compliant |
| 69 | ||
| L000691-80 | TE Connectivity | EVAL KIT, -4.5DBI, CERAMIC PATCH ANTENNA; RoHS : Compliant |
| 10 | ||
| 450XBX4069-110/125VDC | Struthers-Dunn | RELAY, 125VDC, 40A, DPDT, DIN RAIL; Contact Configuration:DPDT; Coil Voltage:125VDC; Contact Current:40A; Product Range:450 Series; Relay Mounting:DIN Rail, Panel; Coil Type:-; Contact Voltage VAC:277V; Relay Terminals:Screw RoHS : Not Compliant |
| 8 | ||
![]() RS | 10691 | Heyco | NYLON PCB SUPPORTS, THREADED MALE, TWO PRONG SNAP FIT, HSCBS1-632-04 |
| 1,000 | |
| C23004 (1825069-1) | TE Connectivity | CAP FOR PUSHBUTTON SWITCH BLACK FITS MPS/MSPM/MPE/MPA6 SERIES |
| 333 | ||
| 6609069-1 | TE Connectivity | POWER LINE FILTER, 6A, 250VAC, 1 PHASE, FLANGED, CORCOM FC SERIES RoHS : Compliant |
| 205 | ||
| QS-6-4-100 (130691) | Festo | CONNECTOR, PBT, FOR TUBING, REDUCING: 6MM OD TO 4MM OD |
| 80 | ||
| 206918 | RS Pro | PANEL MOUNT INDICATOR GREEN LED 19MM PROMINENT BEZEL SOLDER TABS 24V 20MA |
| 60 | ||
| 450XBX4069-110/125VDC | Struthers-Dunn | 450 SERIES, HEAVY DUTY RELAY, DPDT, 40 A CONTACTS, 125VDC COIL, BLOWOUT MAGNET |
| 12 | ||
| 2500691 | RS Pro | CORDSET M12 FEMALE STRAIGHT 5 PIN/5 WIRE TO M12 MALE STR BLACK PVC 16.4FT (5M) A |
| 11 | ||
| 8606912 | RS Pro | CARTRIDGE HEATER 1.97 X 0.39IN (50 X 10MM) 10IN (254MM) LEAD 220VAC |
| 5 | ||
| 17274TB-H-BX (0075006913) | Dichtomatik | OIL SEAL, 1.75" ID, 2.717" OD, 0.438" WIDTH, N701R MATERIAL |
| 5 | ||
| 2456419 (25530691) (CAI20250125G-100RS) | RS Pro | 1/4-20 X 1 1/4 IN CARRIAGE BOLT, GRADE A, GALVANIZED, COARSE |
| 5 | ||
| 450XBX4069-120VAC | Struthers-Dunn | 450 SERIES, HEAVY DUTY RELAY, DPDT, 40 A CONTACTS, 120VAC COIL, BLOWOUT MAGNET |
| 4 | ||
| HEL-D-MIDI (170691) | Festo | MANUAL VALVE, ON/OFF, SOFT-START, 270G |
| 3 | ||
| 8606918 | RS Pro | CARTRIDGE HEATER 1.97 X 0.39IN (50 X 10MM) 10IN (254MM) LEAD 220VAC |
| 2 | ||
| 2906919 (PLC-APT-PT100-IN) | Phoenix Contact | PLC-APT-PT100-IN;2906919 |
| 2 | ||
| ET40 (69183-6) | Klein Tools Inc | DIGITAL AC/DC VOLTAGE TESTER 12 TO 240V AC, 1.5 TO 24V DC |
| 1 | ||
![]() Microchip Technology Inc | PX-706-9100-25M0 | Microchip Technology Inc | PX-706-9100-25M0, Projected EOL: 2051-05-12 - Contact for Pricing | 85 | ||
| 15069-110 | Microchip Technology Inc | TIME FREQ. REF,RB,8123B,JSF-F35,[8300B], Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| 15069-101 | Microchip Technology Inc | RB (8123A) [JSF F35 TIME FREQ. REF.], Projected EOL: 2051-01-13 - Contact for Pricing | 0 | |||
| ZL30691LFG7 | Microchip Technology Inc | Single Channel SyncE Timing Card, VFLGA, Projected EOL: 2045-11-22 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-069.1200 | Microchip Technology Inc | MEMS OSC, LVCMOS, 69.12MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-07-01 RoHS : Compliant |
| 0 | ||
| DSC1001DI1-069.1200T | Microchip Technology Inc | MEMS OSC, LVCMOS, 69.12MHz, 50PPM, 1.8-3.3V, -40 to 85C, 2.5 x 2.0mm, VDFN, Projected EOL: 2046-07-01 RoHS : Compliant |
| 0 | ||
| ZL30691_CONFIGURABLE | Microchip Technology Inc | Single Channel SyncE Timing Card, VFLGA, Projected EOL: 2049-06-02 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | LTC1069-1CN8#PBF | Analog Devices Inc | IC Elliptic, Low Pass 12kHz ±1.57V - ±5.5V 8-DIP Tube RoHS : Compliant |
| 39 | |
| LTC1069-1CS8#PBF | Analog Devices Inc | IC Elliptic, Low Pass 12kHz ±1.57V - ±5.5V 8-SOIC Tube RoHS : Compliant |
| 29 | ||
LTC1069-1CN8#PBF![]() | Linear Technology | IC Elliptic, Low Pass 12kHz ±1.57V - ±5.5V 8-DIP Tube RoHS : Compliant |
| 45 | ||
![]() Sager | HLCD-20-06.91-TR-TR-1 | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant |
| 0 | |
| 2130691700 | Molex | Bench Top Tools FA2 APPLICATOR - MECHANICAL FEED | 0 | |||
| 2266069-1 | TE Connectivity | Bench Top Tools OC-AT-S-FM-110F 170O-752-0199 | 0 | |||
| 2906916 | Phoenix Contact | PLC Controllers PLC-ASC-UI-IN RoHS : Compliant | 0 | |||
| 1300100691 | Molex | Sensor Cables / Actuator Cables MC 4P MFE 30' 90/ST 16/4 PVC | 0 | |||
| 0691271096 | Molex | Tool Kits & Cases FABRICATED PARTS KIT PB14 |
| 0 | ||
| 0691275074 | Molex | Other Tools INFEED GUIDE |
| 0 | ||
| 0691271097 | Molex | Crimpers / Crimping Tools FABRICATED PARTS KIT PB14 |
| 0 | ||
| 0387006912 | Molex | Barrier Terminal Blocks SR BTS PC BRS 12 ASY C | 0 | |||
| 0387106911 | Molex | Barrier Terminal Blocks SR BTS PC 11 ASY C | 0 | |||
| 2130691170 | Molex | Tool Kits & Cases TOOL KIT |
| 0 | ||
| 2906917 | Phoenix Contact | PLC Controllers PLC-APT-UI-IN RoHS : Compliant |
| 0 | ||
| 0532680691 | Molex | Molex | 0 | |||
| 0691275066 | Molex | Other Tools MOTOR MOUNTING SPACER |
| 0 | ||
| 1-1617069-1 | TE Connectivity | Solid State Relays - PCB Mount JDS9-1Y RoHS : Compliant | 0 | |||
![]() TME | T801M106911RQ1 | Amphenol Corporation | T801M106911RQ1 |
| 118,940 | |
| WCR1206-910RFI | TT Electronics plc | Resistor: thick film; 910Ω; SMD; 1206; 250mW; ±1%; 3.1x1.55x0.55mm |
| 30,000 | ||
| 2292069-1 | TE Connectivity | Connector: PCB to PCB; PIN: 74; angled; Inom: 900mA; SMT; Imax: 0.9A RoHS : Compliant |
| 1,750 | ||
| PX0691/20/63 | Bulgin | Connector: AC supply; plug; female; 10A; 250V; PIN: 2; C18; PX; male RoHS : Compliant |
| 180 | ||
| 069176702201000 | Kyocera AVX Components | Tool: mounting tool; for IDC connectors; 9176-400 RoHS : Compliant |
| 56 | ||
| ASP-206918-01 | Samtec Inc | Connector: PCB to PCB |
| 15 | ||
| MK-332-069-135-9900-KP11 | Molex | Connector: D-Sub; PIN: 69; plug; straight; soldering |
| 5 | ||
| 11106914-00 | TE Connectivity | Converter: pressure |
| 2 | ||
| 09185106914 | HARTING Technology Group | Connector: IDC; socket; male; PIN: 10; SEK; straight; 1A; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| 09185206913 | HARTING Technology Group | Connector: IDC; socket; male; PIN: 20; SEK; angled; 1A; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| 09185406911 | HARTING Technology Group | Connector: IDC; socket; male; PIN: 40; SEK; angled; 1A; THT; 2.54mm RoHS : Compliant |
| 0 | ||
| SLLP306913S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 13; THT; 3A; 250V; 1x13 |
| 0 | ||
| SLLP306910S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 10; THT; 3A; 250V; 1x10 |
| 0 | ||
| SLLP306913Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; PIN: 13; THT; 3A; 250V; 1x13 |
| 0 | ||
| CRCW120691R0FKEA | Vishay Intertechnologies | Resistor: thick film; 91Ω; SMD; 1206; 250mW; ±1%; 200V; -55÷155°C RoHS : Compliant |
| 0 | ||
![]() ComSIT USA | 10069102252ASLF | Amphenol Corporation | AVAILABLE EU | 11,250 | ||
| CRCW120691K0FKEA | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 3,439 | |||
![]() ComSIT USA | RCV1206910KFKECAT | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 910000ohm, 800V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 60,000 | ||
| TNPV1206910KBEEC | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.25W, 910000ohm, 700V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 1206 RoHS : Compliant | 40,000 | |||
| 3006916100 | Marquardt Switches Inc | Electronic Component RoHS : Not Compliant | 35,627 | |||
| CRCW1206910RRFKEA | Vishay Intertechnologies | Electronic Component RoHS : Compliant | 5,000 | |||
| 3006915100 | Marquardt Switches Inc | Electronic Component RoHS : Not Compliant | 3,600 | |||
| 9185206914 | HARTING Technology Group | RECT CONN Header Male Pin Through Hole 20 POS 2.54mm Solder Gold RoHS : Compliant | 1,600 | |||
![]() Interstate Connecting Components | 504050-0691 | Molex | CUT STRIP - 1.50MM PICOLOK RA SM HDR |
| 625 | |
| 17-200691 | Conec Corporation | RoHS : Compliant |
| 0 | ||
| 1617069-1 | TE Connectivity | DS11-1000 = DS11 SOLID STATE D RoHS : Compliant |
| 0 | ||
| 294GB506915N | Amphenol PCD | RHINO | 0 | |||
| 294GB506917B | Amphenol PCD | RHINO | 0 | |||
| 690691-1 | TE Connectivity | REAR SHEAR PLATE RoHS : Compliant |
| 0 | ||
| 2110069-1 | TE Connectivity | SFP 1x4 Cage Assembly Light Pipes RoHS : Compliant |
| 0 | ||
| 121567-0691 | ITT Interconnect Solutions | KPSE6E14-12P-DZ-A241-F0 | 0 | |||
| 62GB106912714 | Amphenol PCD | 62GB | 0 | |||
| 294GB506917C | Amphenol PCD | RHINO | 0 | |||
| 420691N001 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCRT-1145-OX-34-0-CS6302 | 0 | |||
| 307AS069-14 | Glenair Inc | 0 | ||||
| 85914106910 | SOURIAU-SUNBANK | J59603 | 0 | |||
| 62GB106912416 | Amphenol PCD | 62GB | 0 | |||
| 2-1747069-1 | TE Connectivity | GRACE INERTIA CONN 2.0 PLUG HS RoHS : Compliant |
| 0 | ||
![]() PEI Genesis | 294GB-5069-17-B | Amphenol Corporation |
| 0 | ||
| 190-06916 | Amphenol PCD |
| 0 | |||
| 294GB-5069-17-C | Amphenol Corporation |
| 0 | |||
| 10691.1 | CONTA-CLIP Inc |
| 0 | |||
| 294GB-5069-17-E | Amphenol Corporation |
| 0 | |||
| 190-06914 | Amphenol PCD |
| 0 | |||
| 190-06915 | Amphenol PCD |
| 0 | |||
| S2069-1520A3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| 294GB-5069-17-A | Amphenol Corporation |
| 0 | |||
| 294GB-5069-13-N | Amphenol Corporation |
| 0 | |||
| 75-069128-11S | Amphenol Corporation |
| 0 | |||
| 294GB-5069-15-B | Amphenol Corporation |
| 0 | |||
| 294GB-5069-15-N | Amphenol Corporation |
| 0 | |||
| 294GB-5069-15-E | Amphenol Corporation |
| 0 | |||
| 75-069116-08S | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 2-1747069-1 | TE Connectivity | Connectors RoHS : Compliant |
| 5,280 | |
| 30691 | TE Connectivity | Connectors RoHS : Compliant |
| 1,243 | ||
| 1-794069-1 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 945 | ||
| MK-332-069-143-2200 | AirBorn a molex company | Vertical Plated Thru Hole PCB Metal Conn RoHS : Compliant |
| 454 | ||
| 1617069-1 | TE Connectivity | Relays RoHS : Compliant |
| 69 | ||
| 2110069-1 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 68 | ||
| Y702-0069-16-00078 | TE Connectivity | CONNECTOR (MFR REF 702-0069-16-00078) |
| 65 | ||
| 6609069-1 | TE Connectivity | Electronic Component RoHS : Compliant |
| 58 | ||
| 934069100 | Altech Corporation | Test Lead MLS WS 200/1 BLACK |
| 40 | ||
| 104069-1 | TE Connectivity | Headers & Wire Housings RoHS : Not Compliant |
| 40 | ||
| MM-312-069-161-45UQ | AirBorn a molex company | Metal Cable Connector |
| 10 | ||
| MK-332-069-145-2200 | AirBorn a molex company | Vertical Plated Thru Hole PCB Metal Conn RoHS : Not Compliant |
| 6 | ||
| MK-3F2-069-175-320S | AirBorn a molex company | Vertical Plated Thru Hole PCB Metal Conn RoHS : Not Compliant |
| 2 | ||
| MM-312-069-161-22Y6 | AirBorn a molex company | Metal Cable Connector RoHS : Compliant |
| 1 | ||
| MK-332-069-123-2200 | AirBorn a molex company | Vertical Plated Thru Hole PCB Metal Conn RoHS : Compliant |
| 1 | ||
![]() Richardson RFPD | 934069191115![]() | NXP Semiconductors | RF Amp Single LNA 2.69GHz 3.1V 6-Pin XSON T/R RoHS : Compliant | 0 | ||
| 570MBA000691DG | Skyworks Solutions Inc | Oscillator XO 131.25MHz ±31.5ppm LVPECL 55% 3.3V 8 RoHS : Compliant |
| 0 | ||
| SI5335D-B06916-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 1-104069-1 | TE Connectivity | Conn Shrouded Header HDR 16 POS 1.27mm Solder RA T RoHS : Not Compliant | 0 | |||
| R124069123W | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| 85069100 | HUBER+SUHNER | Tools, Drill Bit/Center Conductor Sharpener RoHS : Compliant |
| 0 | ||
| SI5335D-B06917-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5341B-D06919-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
934069192115![]() | NXP Semiconductors | RF Amp Single LNA 960MHz 3.1V 6-Pin XSON T/R RoHS : Compliant | 0 | |||
| 5352069-1 | TE Connectivity | Conn Hard Metric F 125 POS 2mm Press Fit RA Thru-H RoHS : Compliant |
| 0 | ||
| 934069129118 | Ampleon | Power LDMOS Transistor RoHS : Not Compliant | 0 | |||
| SB0691 | TE Connectivity | SONDE CE_ K__ ____ 2517__ 2PT1 RoHS : Not Compliant | 0 | |||
| 85069101 | HUBER+SUHNER | 74_Z-0-0-637 RoHS : Compliant |
| 0 | ||
| SI5341B-D06911-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| SI5335D-B06915-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 504050-0691 | Molex | INSTOCK | 224,640 | ||
| 504580-0691 | Molex | INSTOCK | 187,200 | |||
| 160691-5 | TE Connectivity | INSTOCK RoHS : Compliant | 177,450 | |||
| 504520-0691 | Molex | INSTOCK RoHS : Compliant | 52,845 | |||
| 5040500691- | Molex | INSTOCK | 20,728 | |||
| DS1069-10MVW6X | INSTOCK | 16,092 | ||||
| CRCW1206910KFKEA | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 12,974 | |||
| DS1069-12MRW6XB | INSTOCK | 2,585 | ||||
| 6019B0691401 | INSTOCK | 1,417 | ||||
| 09-18-520-6914-03 | HARTING Technology Group | INSTOCK | 233 | |||
| 09-18-510-6914 | INSTOCK | 74 | ||||
| 0691-2000-01 | Bel Fuse | INSTOCK RoHS : Compliant | 56 | |||
| 77069-100 | INSTOCK | 30 | ||||
| A1005406910A51K | INSTOCK | 19 | ||||
| 09 18 510 6913 | HARTING Technology Group | INSTOCK | 4 | |||
![]() Avnet Abacus | 5014610691 | Molex | Conn FPC Connector SKT 6 POS 05mm Solder RA SMD Embossed TR - Tape and Reel (Alt: 5014610691) RoHS : Compliant | 9,000 | ||
| 770069-1 | TE Connectivity | Conn Housing PL 2 POS 63mm Crimp ST Individual (Alt: 770069-1) RoHS : Compliant | 4,800 | |||
| 1-794069-1 | TE Connectivity | Conn Power PIN 18 POS 414mm Solder ST ThruHole 18 Terminal 1 Port (Alt: 1-794069-1) RoHS : Compliant | 3,600 | |||
| MM-312-069-161-45WR | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-312-069-161-45WR) RoHS : Compliant | 5 | |||
| MM-313-069-161-00WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-313-069-161-00WQ) RoHS : Not Compliant | 5 | |||
| MM-313-069-161-00WR | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-313-069-161-00WR) RoHS : Not Compliant | 5 | |||
| MM-312-069-161-45WQ | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical PreWired Crimped (Alt: MM-312-069-161-45WQ) RoHS : Compliant | 5 | |||
| MM-312-069-1A3-0000 | Molex | AirBorn M Series MicroD Cable Mount Plug 0050 127mm Pitch Vertical Solder Cup (Alt: MM-312-069-1A3-0000) RoHS : Compliant | 5 | |||
| MK-332-069-135-9900-KP11 | Molex | AirBorn M Series MicroD Board Mount Plug 0050 127mm Pitch Vertical Through Hole (Alt: MK-332-069-135-9900-KP11) RoHS : Not Compliant | 5 | |||
| 069172-000 | TE Connectivity | (Alt: 069172-000) RoHS : Compliant | 0 | |||
| M80-6912698 | Harwin | (Alt: M80-6912698) RoHS : Compliant | 0 | |||
| M80-6910898 | Harwin | (Alt: M80-6910898) RoHS : Compliant | 0 | |||
| 0691-0250-01 | Bel Fuse | (Alt: 0691-0250-01) RoHS : Compliant | 0 | |||
| CRCW120691R0JNEAIF | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120691R0JNEAIF) RoHS : Compliant | 0 | |||
| MK-332-069-145-2200 | Molex | AirBorn M Series MicroD Board Mount Plug 0050 127mm Pitch Vertical Through Hole (Alt: MK-332-069-145-2200) RoHS : Compliant | 0 | |||
![]() Avnet Asia | SJ202100069(101) | Amphenol Corporation | (Alt: SJ202100069(101)) RoHS : Compliant |
| 900 | |
| 2506918-1 | TE Connectivity | CA,MCIO 16X STR TO MCIO 8X STR,PULL,G6 (Alt: 2506918-1) RoHS : Compliant | 0 | |||
PSMN069-100YS,115![]() | Nexperia | Trans MOSFET N-CH 100V 17A 5-Pin(4+Tab) LFPAK T/R (Alt: PSMN069-100YS,115) RoHS : Compliant | 0 | |||
| 10146069-121C0LF | Amphenol Corporation | FCI10146069-121C0LF CONNECTOR, PCIE GEN5 (Alt: 10146069-121C0LF) RoHS : Compliant | 0 | |||
| 10146069-121T0LF | Amphenol Corporation | FCI10146069-121T0LF SSIO,PCIE 64P SMT ST (Alt: 10146069-121T0LF) RoHS : Compliant | 0 | |||
| Y00691K00000J0L | VPG Foil Resistors | (Alt: Y00691K00000J0L) RoHS : Not Compliant | 0 | |||
| 95-900-10691 | Amphenol Corporation | FAKRA STR PLUG TO RA IP67 CABLE L:390MM (Alt: 95-900-10691) RoHS : Compliant | 0 | |||
| Y0069100R000J0L | VPG Foil Resistors | (Alt: Y0069100R000J0L) RoHS : Not Compliant | 0 | |||
| 10146069-111C0LF | Amphenol Corporation | Connector PCI Express Gen5 64 Position 1mm Straight Surface Mount Tray (Alt: 10146069-111C0LF) RoHS : Compliant | 0 | |||
| Y006910K0000J0L | VPG Foil Resistors | (Alt: Y006910K0000J0L) RoHS : Not Compliant | 0 | |||
| 10146069-120T0LF | Amphenol Corporation | FCI10146069-120T0LF SSIO,PCIE 36P SLD ST (Alt: 10146069-120T0LF) RoHS : Compliant | 0 | |||
| 10146069-112Y0LF | Amphenol Corporation | (Alt: 10146069-112Y0LF) RoHS : Compliant | 0 | |||
| 5037630691 | Molex | Pin Header, 6 Contacts, 1 Row, 1mm, Gold, 2.5A, Right Angle, Shrouded, Copper Alloy, Wire-to-Board (Alt: 5037630691) RoHS : Compliant |
| 0 | ||
| 5040500691 | Molex | Pin Header, 6 Contacts, 1 Row, 1.5mm, Gold, 3A, Right Angle, Copper Alloy, Wire-to-Board, SMT RA (Alt: 5040500691) RoHS : Compliant | 0 | |||
| 5352069-1 | TE Connectivity | Conn Hard Metric RCP 125 POS 2mm Press Fit RA Thru-Hole (Alt: 5352069-1) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | PSMN069-100YS,115![]() | Nexperia | Trans MOSFET NCH 100V 17A 5Pin4Tab LFPAK TR (Alt: PSMN069-100YS,115) RoHS : Compliant | 0 | ||
| DSC8002DI1-069.120 | Microchip Technology Inc | (Alt: DSC8002DI1-069.120) RoHS : Compliant | 0 | |||
![]() DB Roberts | 782PP-300691 | Avdel | DICHTUNGSSATZ | 0 | ||
| 10691 | Heyco | HSCBS1-632-04 NATURAL | 0 | |||
| 10691 | Essentra Components | 0 | ||||
| 47-10-691-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-80-691-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 0691-SS-20 | RAF Electronic Hardware | 0 | ||||
| 47-80-691-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-10-691-51 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 100691 | Pop Rivets | ACD616ASMUG 827 B3K | 0 | |||
| A8-11-0691 | Southco | 0 | ||||
| 10691F | Heyco | HSCBS1-632-04 V-0 NATURAL | 0 | |||
| 600691 | Essentra Components | 0 | ||||
| 47-10-691-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 490691 | Essentra Components | 0 | ||||
| 23010691 | Avdel | MANDREL, M8 PNT600-01-8 | 0 | |||
![]() Master Electronics | 0691-0050-02 | Bel Power Solutions | RoHS : Compliant |
| 38 | |
| 450XBX4069-120VAC | Struthers-Dunn | DIN Mount Relay - DPDT (2 Form C) - 40 Amp - Coil:120VAC - Screw Terminals - Open - Class F RoHS : Compliant |
| 11 | ||
| 31069102 | METZ CONNECT USA | Terminal Block - Type 069 - 2 pole - Pitch 5mm RoHS : Compliant |
| 2 | ||
| HLCD-20-06.91-TR-TR-1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MMSS-03-20C-S-06.91-S-K | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 504050-0691 | Molex | Conn Wire to Board HDR 6 POS 1.5mm Solder RA SMD Pico-Lock™ T/R RoHS : Compliant |
| 0 | ||
| 069172-000 | TE Connectivity | QFT-CRIMP-TOOL-MANUAL MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000691260 | ITT Interconnect Solutions | Conn Rcpt Fmale 6P Silver Crimp RoHS : Not Compliant |
| 0 | ||
| 113021-0691C | ITT Interconnect Solutions | CIRCULAR RoHS : Not Compliant |
| 0 | ||
| CLB-00000691 | Carling Technologies | CLB03327JNNWH/03 RoHS : Compliant |
| 0 | ||
| 1617069-1 | TE Connectivity | DS11-1000 = DS11 SOLID STATE D RoHS : Compliant |
| 0 | ||
| 1213069-1 | TE Connectivity | CRIMPER INSULATION RoHS : Not Compliant |
| 0 | ||
| 2906919 | Phoenix Contact | Pt 100/Pt1000 temperature transducer for PLC logic logic modules (Generation 2 only) - single-channel - signal type (Pt 100 - Pt 1000) can be configured via DIP switch - Push-in connection RoHS : Compliant |
| 0 | ||
| DSC1001DI1-069.1200T | Microchip Technology Inc | MEMS OSC LVCMOS 69.12MHz 50PPM 1.8-3.3V -40 to 85C 2.5 RoHS : Compliant |
| 0 | ||
| EC0691-000 | TE Connectivity | Cable Markers Pre-Marked Push On Polyvinyl Chloride White RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 09241206919 | HARTING Technology Group | DIN 41612 Connectors 20P Male 3B R/A Solder RoHS : Compliant |
| 50 | |
| 09251306919 | HARTING Technology Group | DIN 41612 Connectors 30P Male 3C R/A Solder RoHS : Compliant |
| 50 | ||
| 5540691 | Phoenix Contact | Connector ADAPT NPT1/2 TO PG13.5 |
| 50 | ||
| 1506914 | Phoenix Contact | Circular Metric Connectors SACC-M 8MS-4CON-M-SH RoHS : Compliant |
| 50 | ||
| 09195506913 | HARTING Technology Group | Headers & Wire Housings SEK19 SV HTML STD ANG29 RKZ 50P PL2 RoHS : Compliant |
| 35 | ||
| 09185406912 | HARTING Technology Group | Headers & Wire Housings SEK-18 SV ML STD STR45 RKZ 40P AU2 RoHS : Compliant |
| 31 | ||
| 09185606914 | HARTING Technology Group | Headers & Wire Housings SEK-18 SV ML STD STR29 RKZ 60P PL2 RoHS : Compliant |
| 17 | ||
| 200-906-91 | Altech Corporation | Enclosures for Industrial Automation TGPC1608-9-oS, 162x82x85mm |
| 11 | ||
| 09185606913 | HARTING Technology Group | Headers & Wire Housings SEK-18 SV ML STD ANG29 RKZ 60P PL2 RoHS : Compliant |
| 8 | ||
| 318020691 | Seeed Development Ltd | Antenna Accessories LoRa Fiberglass Antenna Kit; 902-928MHz; 5.8dBi; 800mm; RF Explorer RFELA-3/58X |
| 4 | ||
| 106910 | Basler AG | Vision Sensors acA1920-40uc |
| 1 | ||
| 09195406914 | HARTING Technology Group | Headers & Wire Housings SEK19 SV HTML STD STR29 RKZ 40P PL2 RoHS : Compliant |
| 1 | ||
| 206916 | Warrick | Flow Switch, SS, for Large Flow,Low Pressure Drop, 1GPM,1/2NPT,FS-480 Series |
| 0 | ||
2906910![]() | Phoenix Contact | Terminal Block Interface Modules UM-D37M/16R-120AC/ DI/C3/L RoHS : Compliant |
| 0 | ||
| 09185606912 | HARTING Technology Group | Headers & Wire Housings SEK-18 SV ML STD STR45 RKZ 60P AU2 RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W03069-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to SMA Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax., Radio frequency assembly N male right angle to SMA male low loss cable 12 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to SMA male low loss cable 12 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and SMA cable connection on the other. Our low loss right angle type N to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W03069-12 can also be known as a low loss right angle type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3W03069-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this type N right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03069-12 can also be used in the other direction and will be SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to SMA male low loss cable 12 inch length using LMR-240-UF coax. |
| 1,675 | |
| PE3C1069-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to SMA Male Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SMA male to SMA male cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3C1069-18 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE3C1069-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C1069-18 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 164 | ||
| PE3C1069-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using Tinned RG405 Coax., Radio frequency assembly SMA male to SMA male cable 12 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 12 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assembly has male gender on end 1 and male on end 2. PE3C1069-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA plug to SMA plug cable assembly PE3C1069-12 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a stainless steel body with gold plating. Additional dimensions, specifications and CAD drawings for this PE3C1069-12 RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 164 | ||
| PE3M0069-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 12 inches. MIL-DTL-17 N Female Bulkhead to N Female Bulkhead Cable 12 Inch Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to N female bulkhead cable 12 inch length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to N female bulkhead cable 12 inch length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 type N to M39012/03-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 N type bulkhead cable connection on one end and M39012/03-0503 N type bulkhead cable connection on the other. Our M39012/03-0503 type N to M39012/03-0503 type N cable assemblies have a female gender on end 1 and female on end 2. This M39012/03-0503 N type to M39012/03-0503 type N cable is a female to female coax assembly, PE3M0069-12, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/03-0503 N type jack cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/03-0503 type N jack cable assembly PE3M0069-12 is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/03-0503 N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/03-0503 type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/03-0503 N type jack bulkhead to M39012/03-0503 type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/03-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to N female bulkhead cable 12 inch length using M17/128-RG400 coax. |
| 66 | ||
| PE3CA1069-12 | Pasternack Enterprises |
| 42 | |||
| PE3FCA069-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Dual LC UPC to SC UPC, MM OM4, 2.0mm LSZH, Aqua - 10 meter. Pasternack’s PE3FCA069-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA069-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 21 | ||
| PE3C100069-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154A, RF Cable Type: PE-TC154A, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 12 Inch Length Using PE-TC154A Coax., Pasternack’s PE3C100069-12 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100069-12 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100069-12 RF cable has a ruggedized aramid yarn jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100069-12 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements. |
| 14 | ||
| PE3W06915 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to Push-On SMP Female Right Angle Cable Using RG174 Coax. PE3W06915 is a SMA female bulkhead to SMP female right angle cable using RG174 coax. This Pasternack SMA female bulkhead to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06915 SMA female bulkhead to SMP female right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W06910-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Cable 36 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male right angle cable 36 inch length using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle cable 36 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W06910-36 can also be known as a type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.15-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W06910-36 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W06910-36 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W06910-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Male to N Male Right Angle Cable 6 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male right angle cable 6 inch length using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle cable 6 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W06910-6 can also be known as a type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.15-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W06910-6 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W06910-6 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3W10069-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 12 inches. UHF Male to N Male Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly UHF male to N male low loss cable 12 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to N male low loss cable 12 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and N type cable connection on the other. Our low loss UHF to type N cable assemblies have a male gender on end 1 and male on end 2. This UHF to type N cable is a male to male coax assembly, PE3W10069-12, can also be known as a low loss UHF plug to type N plug cable assembly and will be shipped same-day as it is purchased. UHF plug to N type plug cable assembly PE3W10069-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency UHF male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10069-12 can also be used in the other direction and will be type N male to UHF male cable assembly if the opposite connectivity is required. Low loss UHF plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to type N cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to N male low loss cable 12 inch length using LMR-195 coax. |
| 0 | ||
| PE3W10069-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. UHF Male to N Male Low Loss Cable 150 cm Length Using LMR-195 Coax., Radio frequency assembly UHF male to N male low loss cable 150 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. UHF male to N male low loss cable 150 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom UHF to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with UHF cable connection on one end and type N cable connection on the other. Our low loss UHF to N type cable assemblies have a male gender on end 1 and male on end 2. This UHF to type N cable is a male to male coax assembly, PE3W10069-150CM, can also be known as a low loss UHF plug to N type plug cable assembly and will be shipped same-day as it is purchased. UHF plug to type N plug cable assembly PE3W10069-150CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible UHF cable assembly is manufactured with UHF to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency UHF male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10069-150CM can also be used in the other direction and will be type N male to UHF male cable assembly if the opposite connectivity is required. Low loss UHF plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality UHF to type N cable assembly for quick shipment worldwide. Variations of UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this UHF male to N male low loss cable 150 cm length using LMR-195 coax. |
| 0 | ||
| PE3W06916/PH90 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMP Female Right Angle Cable Using PE-SR405FL Coax with 90 Deg. Clock. PE3W06916/PH90 is a SMA male right angle to SMP female right angle cable using PE-SR405FL coax. This Pasternack SMA male right angle to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA right angle to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W06916/PH90 SMA male right angle to SMP female right angle cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W06910-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Right Angle Cable 48 Inch Length Using PE-SR402AL Coax., Radio frequency assembly N male to N male right angle cable 48 inch length using PE-SR402AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N male right angle cable 48 inch length using PE-SR402AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W06910-48 can also be known as a type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.15-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W06910-48 is built with PE-SR402AL which is a semi-rigid coax type. The Pasternack semi-rigid type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W06910-48 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10691 | Pasternack Enterprises | 0 | ||||
![]() TE Connectivity | 770069-1 | TE Connectivity | 02P .093 COMM P&S PLUG .248CL Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 770069-1 | Internal Number: 770069-1 | TE Connectivity RoHS : Compliant |
| 3,492 | |
| 5352069-1 | TE Connectivity | Z-PACK/B25 RAF 125P PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 25 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 25 | Hard Metric Backplane Connector | Part Number: 5352069-1 | Internal Number: 5352069-1 | TE Connectivity RoHS : Compliant |
| 942 | ||
| 1825069-1 | TE Connectivity | C23004 CAP BLACK Switch Accessory Type: Pushbutton Switch Boot Seal Product Shape: Round Primary Product Color: Black Pushbutton Switch Boot Seal Round Black | Switch Seal & Accessories | Part Number: 1825069-1 | Internal Number: 1825069-1 | Alias Number: C23004 | TE Connectivity RoHS : Compliant |
| 771 | ||
| 5172069-1 | TE Connectivity | 12P DRAWER FEM.ASSY Number of Positions: 12 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 12 Receptacle Housing With | Part Number: 5172069-1 | Internal Number: 5172069-1 | TE Connectivity RoHS : Compliant |
| 727 | ||
| 5749069-1 | TE Connectivity | 20 50SR VERT RCPT ASSY Number of Positions: 20 Connector & Housing Type: Receptacle Connector System: Cable-to-Board Connector Mounting Type: Board Mount Centerline (Pitch): 1.27 mm D-Shaped Connector | 20 Receptacle Cable-to-Board Board Mount | Part Number: 5749069-1 | Internal Number: 5749069-1 | 1.27 mm | TE Connectivity RoHS : Compliant |
| 685 | ||
| 1-794069-1 | TE Connectivity | 18P MINI UMNL HDR W/DH AU LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 18 Number of Rows: 2 PCB Mount Header Vertical Wire-to-Board 18 | PCB Header & Receptacle | Part Number: 1-794069-1 | Internal Number: 1-794069-1 | TE Connectivity RoHS : Compliant |
| 193 | ||
| 2205069-1 | TE Connectivity | CA MICRO-MATCH MOW-PB 6POS Cable Assembly Type: MICRO-MATCH MOW to MICRO-MATCH Number of Positions: 6 Cable Assembly Length: .075 m Cable Assembly Length: .246 ft Cable Color: Gray MICRO-MATCH MOW to MICRO-MATCH 6 .075 m .246 ft | Micro-Match Std Pb To Mow Cable Assy | Part Number: 2205069-1 | Internal Number: 2205069-1 | Gray | TE Connectivity RoHS : Compliant |
| 170 | ||
| 352069-1 | TE Connectivity | Z-PACK/B F-HDR.125P PCB Connector Type: PCB Mount Receptacle Data Rate: ≤1 Gb/s Number of Columns: 25 Number of Rows: 5 Backplane Architecture: Mezzanine PCB Mount Receptacle ≤1 Gb/s 25 | Hard Metric Backplane Connector | Part Number: 352069-1 | Internal Number: 352069-1 | TE Connectivity RoHS : Compliant |
| 17 | ||
| 1729069-1 | TE Connectivity | SAHT MINI CT 28-24 ASSY Tool Grade: Premium Crimp Tooling Ratchet Configuration: Operator Releasable & Adjustable Die Sets Type: Fixed In Tool Specification Type: TE Product Specification (114-) TE Certification: Upon Request for Fee Premium Crimp Tooling Operator Releasable & Adjustable Fixed" Tool | Hand Crimping Tool | Part Number: 1729069-1 | Internal Number: 1729069-1 | TE Connectivity RoHS : Compliant |
| 8 | ||
![]() Vyrian | LTC1069-1IN8-PBF | Analog Devices Inc | 11,741 | |||
| 2110069-1 | TE Connectivity | Connector Accessory, Nickel Silver Alloy RoHS : Compliant | 11,564 | |||
5962-01-050-6914![]() | Analog Devices Inc | Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, MBCY8 RoHS : Not Compliant | 10,927 | |||
| 1617069-1 | TE Connectivity | Transistor Output SSR RoHS : Compliant | 10,762 | |||
| LTC1069-1CS8 | Analog Devices Inc | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, CMOS, PDSO8 RoHS : Not Compliant | 10,136 | |||
| LTC1069-1IS8-TRPBF | Analog Devices Inc | 8,648 | ||||
| LTC1069-1CN8#PBF | Analog Devices Inc | Switched Capacitor Filter, 1 Func, Elliptic, Lowpass, CMOS, PDIP8 RoHS : Compliant | 6,002 | |||
PSMN069-100YS,115![]() | Nexperia | Power Field-Effect Transistor, 17A I(D), 100V, 0.0724ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 5,832 | |||
| KTM0069/128 | Kingston Technology Company | 2,711 | ||||
| MBC-2069-1B6 | Cristek | D Microminiature Connector, 69 Contact(s), Male, Solder Terminal, Plug | 2,138 | |||
| MK-332-069-133-2200-0B7 | AirBorn a molex company | D Microminiature Connector, 69 Contact(s), Male, 0.05 inch Pitch, Solder Terminal, #2-56 Unc, Plug RoHS : Compliant | 862 | |||
| 0691-0050-05 | Bel Fuse | Electric Fuse, Fast Blow, 0.05A, 35A (IR), MICRO RoHS : Compliant | 855 | |||
| PSMN069-100YS | NXP Semiconductors | Power Field-Effect Transistor, 17A I(D), 100V, 0.0724ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 631 | |||
| 0691-0100-05 | Bel Fuse | Electric Fuse, Fast Blow, 0.1A, 35A (IR), MICRO RoHS : Compliant | 413 | |||
| 0691-0160-02 | Bel Fuse | Electric Fuse, Fast Blow, 0.16A, 250VAC, 50A (IR), Through Hole, MICRO RoHS : Compliant | 211 | |||
![]() Waytek, Inc. | 131906-91AW | General Cable Technologies Corporation | 14GA GXL Blue Cross-Link Automotive Wire XLPE -51C to 125C |
| 155,500 | |
| 148606-91W | General Cable Technologies Corporation | 18GA SXL White Cross-Link Automotive Wire XLPE -51C to 125C |
| 32,500 | ||
| 140406-91W | General Cable Technologies Corporation | 14GA TXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 14,000 | ||
| 140306-91W | General Cable Technologies Corporation | 14GA TXL White Cross-Link Automotive Wire XLPE -51C to 125C |
| 10,000 | ||
| 148406-91W | General Cable Technologies Corporation | 12GA SXL Orange Cross-Link Automotive Wire XLPE -51C to 125C |
| 3,000 | ||
![]() Win Source Electronics | PSMN069-100YS | Nexperia | Trans MOSFET N-CH 100V 17A 5-Pin(4+Tab) LFPAK / N-channel LFPAK 100 V 72.4 mΩ standard level MOSFET RoHS : Compliant |
| 37,935 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |