063AG-P08-R Price, nhà phân phối, Stock

Key Specifications, Connector Series: TRB 3-Slot, Connector Gender: Plug, Chain Option: No Chain. TRB 3-Slot Plug Non-shorting Dust Cap. Pasternack’s PE610-06300 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a TRB 3-Slot connector series and a plug gender. Our TRB 3-Slot plug non-shorting connector cap is manufactured with a brass body material and nickel body plating. Our PE610-06300 dust cap has a length of 0.57874 inches, a width of 0.559843 inches, and a height of 0.559843 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this TRB 3-Slot plug connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The PE610-06300 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements.

1 : $25.09
25 : $23.84
50 : $22.58
100 : $21.58

175

PE3W16063LF/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to N Male Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with Times Microwave Components and HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male low loss cable 60 inch length using LMR-240-DB coax with Times Microwave components and heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to N male low loss cable 60 inch length using LMR-240-DB coax with Times Microwave components and heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with right angle a SMA cable connection on one end and a type N cable connection on the other. Our low loss right angle a SMA to a type N cable assembly has male gender on end 1 and male on end 2. PE3W16063LF/HS-60 can also be known as a low loss right angle SMA plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16063LF/HS-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. SMA plug to type N plug cable assembly PE3W16063LF/HS-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16063LF/HS-60 can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3M0063

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm. MIL-DTL-17 BNC Male to TNC Male Cable Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to TNC male cable using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to TNC male cable using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax high reliability cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our high reliability M39012/16-0014 BNC to M39012/26-0011 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/26-0011 TNC cable is a male to male coax assembly, PE3M0063, can also be known as a MIL-DTL-17/MIL-C-17 high reliability M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased in most cases. M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly PE3M0063 is built with M17/128-RG400 which is a flexible coax. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0063 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/16-0014 BNC male cable assembly when used in the opposite direction. High reliability M39012/16-0014 BNC plug to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to TNC male cable using M17/128-RG400 coax.

PE3M0106-30

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 30 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 30 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/56-3107 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and right angle M39012/56-3107 SMA cable connection on the other. Our M39012/55-3026 SMA to right angle M39012/56-3107 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/56-3107 SMA cable is a male to male coax assembly, PE3M0106-30, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to right angle M39012/56-3107 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/56-3107 SMA plug cable assembly PE3M0106-30 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to right angle M39012/56-3107 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/56-3107 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0106-30 can also be used in the other direction and will be right angle M39012/56-3107 SMA male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/56-3107 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/56-3107 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 30 inch length using M17/119-RG174 coax.

1 : $348.99
25 : $331.54
50 : $314.09

PE3C100063-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC154, RF Cable Type: PE-TC154, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Low Loss Test Cable 24 Inch Length Using PE-TC154 Coax., Pasternack’s PE3C100063-24 low loss test 2.4mm male to 2.4mm male RF cable assembly using PE-TC154 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a male gender on end 1 and a male on end 2. PE3C100063-24 can also be known as a low loss test 2.4mm plug to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100063-24 RF cable has a high temperature resin jacket of 0.213-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm male to 2.4mm male cable has a maximum VSWR of 1.4:1. This PE3C100063-24 2.4mm plug to 2.4mm plug cable assembly is built with PE-TC154, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long low loss test RF cable are available on our downloadable PDF datasheet. This low loss test 2.4mm plug to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.

1 : $751.81
5 : $721.74
10 : $691.67
25 : $661.59

PE3C8506-36

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 36 inches. Outdoor Rated 7/16 DIN Male Right Angle to N Female Bulkhead Low PIM Cable 36 Inch Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN male right angle to N female bulkhead low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN male right angle to N female bulkhead low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 7/16 DIN cable connection on one end and N type bulkhead cable connection on the other. Our low PIM right angle 7/16 DIN to type N cable assemblies have a male gender on end 1 and female on end 2. This 7/16 DIN to N type cable is a male to female coax assembly, PE3C8506-36, can also be known as a low PIM right angle 7/16 DIN plug to type N jack cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N jack cable assembly PE3C8506-36 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 7/16 DIN right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8506-36 can also be used in the other direction and will be N type female bulkhead to right angle 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN male right angle to N female bulkhead low PIM cable 36 inch length using SPO-250 coax using Times Microwave parts.

1 : $75.99
25 : $72.19
50 : $68.39
100 : $65.35

PE3W06305-24

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Female to SMA Male Cable 24 Inch Using RG174 Coax., Radio frequency assembly BNC female to SMA male cable 24 inch using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to SMA male cable 24 inch using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our BNC to SMA cable assemblies have a female gender on end 1 and male on end 2. This BNC to SMA cable is a female to male coax assembly, PE3W06305-24, can also be known as a BNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC jack to SMA plug cable assembly PE3W06305-24 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06305-24 can also be used in the other direction and will be SMA male to BNC female cable assembly if the opposite connectivity is required. BNC jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to SMA male cable 24 inch using RG174 coax.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

PE3W06328/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to SMA Male Right Angle Cable Using RG400 Coax with HeatShrink. PE3W06328/HS is a TNC female bulkhead to SMA male right angle cable using RG400 coax. This Pasternack TNC female bulkhead to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06328/HS TNC female bulkhead to SMA male right angle cable assembly is constructed with RG400 coax.

PE3W06336/HS-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. TNC Male to TNC Male Right Angle Cable 150 cm Length Using RG316 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle cable 150 cm length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male right angle cable 150 cm length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W06336/HS-150CM, can also be known as a TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W06336/HS-150CM is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.5 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06336/HS-150CM can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle cable 150 cm length using RG316 coax with heatshrink.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE3W06340

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Smooth Bore SMP Male Bulkhead to MCX Plug Cable Using PE-SR405FLJ Coax. PE3W06340 is a SMP male bulkhead to MCX plug cable using PE-SR405FLJ coax. This Pasternack SMP male bulkhead to MCX plug cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm MCX for connector 2. Our male SMP bulkhead to plug MCX cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W06340 SMP male bulkhead to MCX plug cable assembly is constructed with PE-SR405FLJ coax.

PE3W06371-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to N Male Low Loss Cable 12 Inch Length Using LMR-400 Coax With Times Microwave Components., Radio frequency assembly N male right angle to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and N type cable connection on the other. Our low loss right angle type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W06371-12 can also be known as a low loss right angle N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3W06371-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06371-12 can also be used in the other direction and will be type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male low loss cable 12 inch length using LMR-400 coax with Times Microwave components.

1 : $104.99
25 : $99.74
50 : $94.49
100 : $90.29

PE3W06377

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Right Angle Cable Using RG8X Coax. PE3W06377 is a SMA male to SMA male right angle cable using RG8X coax. This Pasternack SMA male to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06377 SMA male to SMA male right angle cable assembly is constructed with RG8X coax.

PE3W06387-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male low loss cable 24 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 24 inch length using LMR-200 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W06387-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W06387-24 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. TNC plug to TNC plug cable assembly PE3W06387-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3W06391LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using PE-C195 Coax, LF Solder. PE3W06391LF is a N female to N female cable using PE-C195 coax. This Pasternack N female to N female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06391LF N female to N female cable assembly is constructed with PE-C195 coax.

PE3W20632

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using PE-C195 Coax. PE3W20632 is a N male to BNC male cable using PE-C195 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20632 N male to BNC male cable assembly is constructed with PE-C195 coax.

Teledyne HiRel

5962-8606313UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 300 NS ACCESS TIME
RoHS : Not Compliant

5962-8606318QYA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8606314QYA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-8606304YA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-8606317UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-88726063A

Teledyne HiRel

PROG. LOGIC DEVICE, UV ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 35 NS ACCESS TIME
RoHS : Not Compliant

5962-8606301YA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8606314UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 170 NS ACCESS TIME
RoHS : Not Compliant

5962-89841063C

Teledyne HiRel

PROG. LOGIC DEVICE, ELECTR. ERASABLE, 22-INPUT 10-OUTPUT AND-OR, 10 NS

5962-8606311UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8606317QXA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8606301UA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

5962-8606316QXA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-8606317XA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8606306YC

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

UPTF2512-2W-E-7063AT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�25PPM;706K ;�0.05%
RoHS : Compliant

PWCR0603-TK-8063FT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�100PPM;806K;�1%
RoHS : Compliant

PWCR1210-WK-8063DT

VENKEL LTD

Pulse Withstanding CR;1210;3/4W;�100PPM;806K;�0.5%
RoHS : Compliant

CR01005-32W-8063FT

VENKEL LTD

Chip Resistor;01005;1/32W;806K ;�1%
RoHS : Compliant

CR0805-8W-8063FT

VENKEL LTD

Chip Resistor;0805;1/8W;806K;�1%
RoHS : Compliant

HPTF1210-UC-8063FT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�50PPM;806K ;�1%
RoHS : Compliant

UPTF0805-10W-E-1063AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�25PPM;106K ;�0.05%
RoHS : Compliant

UPTF2010-2W-E-7063AT

VENKEL LTD

Ultra Precision Thin Film CR;2010;1/2W;�25PPM;706K ;�0.05%
RoHS : Compliant

UPTF2512-2W-N-8063BT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;806K ;�0.1%
RoHS : Compliant

TFCR0603-10W-C-1063FT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;106K ;�1%
RoHS : Compliant

TFCR0603-16W-C-8063CT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;806K ;�0.25%
RoHS : Compliant

TFCR0805-10W-C-1063CT-1K

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;106K ;�0.25%
RoHS : Compliant

TFCR0805-10W-C-7063FT

VENKEL LTD

Thin Film CR;0805;1/10W;�50PPM;706K ;�1%
RoHS : Compliant

TFCR0805-10W-K-8063CT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;806K ;�0.25%
RoHS : Compliant

TFCR0805-8W-K-7063DT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;706K ;�0.5%
RoHS : Compliant

Waytek, Inc.

4200063BK00R5

ShawCor Ltd

DSG-Canusa CPX-100 polyolefin heat shrink tubing is black tubing with a .063" size for insulating and protecting wires, terminals, and splices. Its flexible polyolefin construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1,000 : $0.1927
5,000 : $0.1854

13,000

CPX 100 0063 BLACK

ShawCor Ltd

100 : $0.2644
500 : $0.2537

4,700

HWN0.63

Techflex Inc

Techflex HWN0.63 Heavy Wall Expandable Sleeving is black 5/8" braided polyester sleeving on a 250' spool. It features a 15 mil heavy wall, fits recommended bundle sizes from 5/16" to 1", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling.

250 : $0.5719
1,250 : $0.5248

4,250

10630-C

Hillsdale Terminal & Tool Inc

Uninsulated Ring Terminal 2 Gauge, 3/8" Stud

10 : $1.1354
50 : $1.011
100 : $0.9177
200 : $0.8866
500 : $0.8594
1,000 : $0.8244

1,683

50630N

Hillsdale Terminal & Tool Inc

Nylon Ring Terminal 2 Gauge, 3/8 Stud

10 : $1.1967
50 : $1.0656
100 : $0.9673
200 : $0.9344
500 : $0.9057
1,000 : $0.8689

668

AT06-3S-CAP

Amphenol Sine Systems

Amphenol Sine Systems AT06-3S-CAP is a black thermoplastic protective plug cap for 3-position AT Series connectors. It fits AT06-3S plugs, provides IP67 moisture resistance when mated, and operates from -55C to +125C.

10 : $0.615
50 : $0.5461
100 : $0.492
200 : $0.4477
500 : $0.4108
1,000 : $0.3788

486

BBN0.63OR

Techflex Inc

Techflex BBN0.63OR Battle Braid Heavy-Duty Cut Resistant Sleeving is orange 5/8"-11/16" polyester sleeving in a 25' length. It offers over 330 lb. cut-through resistance, extremely high abrasion protection, and high-visibility orange identification for EV and heavy-duty cable protection.

25 : $2.8241
125 : $2.5479

425

AT06-3S-SR01GRY

Amphenol Sine Systems

Amphenol Sine Systems AT06-3S-SR01GRY AT Series connector plug is a gray 3-way Deutsch DT-compatible plug with a strain relief end cap and standard seal. The integral design protects wire seals, reduces rear-seal stress, and helps maintain IP67 protection in harness assemblies.

5 : $1.6115
10 : $1.5444
50 : $1.4964
100 : $1.4196
200 : $1.3717
500 : $1.3237

393

AT06-3S-RJ120BK

Amphenol Sine Systems

Amphenol Sine Systems AT06-3S-RJ120BK AT Series connector plug is a black 3-way J1939 plug with a 120 Ohm terminating resistor. It supports sealed Deutsch DT-compatible CAN termination using a female plug housing.

1 : $5.95
10 : $5.44
50 : $4.95
100 : $4.62
200 : $4.27
500 : $4.06

288

HWN0.63

Techflex Inc

Techflex HWN0.63 Heavy Wall Expandable Sleeving is black 5/8" braided polyester sleeving on a 50' spool. It features a 15 mil heavy wall, fits recommended bundle sizes from 5/16" to 1", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling.

50 : $1.2909
250 : $1.1845

200

640063.E3.001

Kalas Wire & Cable

3/0GA EPDM Black Welding Cable 1539/.010 Stranding 100' Spool -50C to 105C

100 : $8.791
1,000 : $8.1111

100

24063-08

Cole Hersee

Solenoid Continuous Duty SPST 24V INSL CR65A/ MR65A /BR65A UL MARINE LISTED

1 : $64.39
5 : $61.82
10 : $58.59
20 : $55.37
50 : $53.76
100 : $51.19

640063.E3.003

Kalas Wire & Cable

3/0GA EPDM Red Welding Cable 1539/.010 Stranding 100' Spoo1 -50C to 105C

100 : $9.2151
1,000 : $8.5023

AT06-3S-SR02BLK

Amphenol Sine Systems

3 Way AT Plug With Strain Relief End Cap 38172 DT06-3S

1 : $1.4827
10 : $1.4421
50 : $1.4013
100 : $1.3606
200 : $1.2546
500 : $1.1977

AT06-3S-SR01BLK

Amphenol Sine Systems

Amphenol Sine Systems AT06-3S-SR01BLK AT Series connector plug is a black 3-way Deutsch DT-compatible plug with a strain relief end cap and standard seal. The integral design protects wire seals, reduces rear-seal stress, and helps maintain IP67 protection in harness assemblies.

5 : $1.3207
10 : $1.2689
50 : $1.1999
100 : $1.1654
200 : $1.1049
500 : $1.0791

Wuhan P&S

TNPW120633K2BEEA

Vishay Intertechnologies

33.2K��, 0.1%, High Stability Thin Film Flat Chip Resistors
RoHS : Compliant

1 : $0.6
100 : $0.22
500 : $0.16
1,000 : $0.15

120,000

MC33063AVDR2G

onsemi

1.5 A, Step-Up/Down/Inverting Switching Regulators
RoHS : Compliant

1 : $0.91
100 : $0.58
500 : $0.48
1,000 : $0.44

32,500

063AG-P08-R nhà phân phối

Link URL