| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty.
BuyNow |
GLYN GmbH & Co. KG | 453-00045C
| Qnity Laird | Module, Sterling LWB5+, Chip Antenna
RoHS : Compliant | | 36
 |
KAB-I-PEX-20453-040T-0250-1:1-
| ES+S | I-PEX CABLINE VS Serie, Kabel fr Hochgeschwindig | | 5
|
KAB-SET-I-PEX-20453-040-DF13-X
| ES+S | KAB-SET-I-PEX-20453-040 -DF13-XXDS-0500LI | | 2
|
ECCO | 10-040450-016
| Amphenol Industrial Operations | | | 5,762
 |
045533-0006-MS
| ITT Interconnect Solutions | | | 100
|
045533-0006B
| ITT Interconnect Solutions | | | 100
|
045276-0001
| ITT Interconnect Solutions |
RoHS : Not Compliant | | 45
|
045503-0006
| ITT Interconnect Solutions |
RoHS : Not Compliant | | 45
|
GM104576
| ITT Interconnect Solutions | | | 37
|
045701-0005-MS
| ITT Interconnect Solutions | | | 22
|
10-040450-018
| Amphenol Industrial Operations | | | 18
|
045701-0006-MS
| ITT Interconnect Solutions | | | 15
|
045701-0006B
| ITT Interconnect Solutions | | | 15
|
045521-0005
| ITT Interconnect Solutions |
RoHS : Not Compliant | | 10
|
045521-0006
| ITT Interconnect Solutions |
RoHS : Not Compliant | | 8
|
10-040450-014
| Amphenol Industrial Operations | | | 2
|
Neutron USA | ATS-CPX045045030-163-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 45mm L, 45mm W, 30mm H, 2.90C/W at 100LFM
RoHS : Compliant | | 50
|
ATS045045007-SF-15F
| Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, Straight Fin, No TIM, Black Anodized, 45x45x7mm (LxWxH)
RoHS : Compliant | | 50
|
ATS-CPX045045030-163-C1-R0
| Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, Straight, Left-Tab, 45x45x30mm, 2.88C/W
RoHS : Compliant | | 50
|
ATS045045009-SF-15H
| Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, High Aspect Ratio Extrusion, Straight, No TIM, 45x45x9mm
RoHS : Compliant | | 50
|
ATS045045006-SF-15E
| Advanced Thermal Solutions Inc | Heat Sinks BGA Heat Sink, Straight Fin, No TIM, Black Anodized
RoHS : Compliant | | 50
|
ATS-CPX045045025-120-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, T766, 45x45x25mm, 3.48C/W
RoHS : Compliant | | 50
|
2-1419104-5
| TE Connectivity | Industrial Relays T9AS1L22-12=RELAY QC/PC SEAL P
RoHS : Compliant | | 50
|
204502-1
| TE Connectivity | D-Sub MIL Spec Connectors RECEPTACLE
RoHS : Not Compliant | | 50
|
21355153564045
| HARTING Technology Group | Specialized Cables M12 A 5 P 4.5M | | 26
|
ATS-CPX045045035-164-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Blue, Square Fin, 45mm L, 45mm W, 35mm H, 2.41C/W at 100LFM
RoHS : Compliant | | 20
|
ATS-FPX045045020-09-C2-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Fine-Pitch, X-Cut, 4-Corner Hole, T766, 45x45x20mm, 10.58C/W
RoHS : Compliant | | 18
|
ATS-CPX045045010-117-C1-R0
 | Advanced Thermal Solutions Inc | Heat Sinks pushPIN Heat Sink, Coarse-Pitch, X-Cut, 4-Corner Hole, 45x45x10mm, 10.46C/W
RoHS : Compliant | | 10
|
PPC-5350GS/A311-CM370/4518AP/T-R/1GB-R10
| iEi Integration Corporation | 15" 350 cd/ XGA Panel PC,A311 W/ Celeron M 1.5GHz/1MB 370,1GB DDR,ACE-4518AP(ATX AC in),RESOLUTION T/S,Silver Color | | 1
|
ST1000NX0453
| Seagate Technology | Seagate ST1000NX0453 1 TB 2.5" Internal Hard Drive | | 0
|
09300160459
| HARTING Technology Group | Heavy Duty Power Connectors METAL HOOD HAN 16B 2 LVR LCKING
RoHS : Compliant | | 0
|
Pasternack Enterprises US | PE3C10457-36
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Female Bulkhead to 2.92mm Male Right Angle Cable 36 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm male right angle cable 36 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm male right angle cable 36 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a right angle 2.92mm cable connection on the other. Our 2.92mm to right angle 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C10457-36 can also be known as a 2.92mm jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm plug cable assembly PE3C10457-36 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10457-36 can also be used in the other direction and will be a right angle 2.92mm male to 2.92mm female bulkhead cable assembly if the opposite connectivity is required. 2.92mm jack bulkhead to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 1 : $620.0
10 : $607.6
25 : $595.2
100 : $582.8
|
| 2
|
PE3C10456-18
| Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-118SR, RF Cable Type: PE-118SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Female Bulkhead to 2.92mm Female Bulkhead Cable 18 Inch Length Using PE-118SR Semi-Rigid Coax., Radio frequency assembly 2.92mm female bulkhead to 2.92mm female bulkhead cable 18 inch length using PE-118SR semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm female bulkhead to 2.92mm female bulkhead cable 18 inch length using PE-118SR semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm bulkhead cable connection on one end and a 2.92mm bulkhead cable connection on the other. Our 2.92mm to 2.92mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10456-18 can also be known as a 2.92mm jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE (LD) dielectric type. The minimum bend radius for this cable is 0.4 inches, allowing for a single bend without damaging the cable. This radio frequency cable assembly can withstand temperatures ranging from -40 to 105 degrees C. The semi-rigid RF cable has an in-series connection. Our bulkhead 2.92mm female to bulkhead 2.92mm female cable has a maximum VSWR of 1.4:1. 2.92mm jack to 2.92mm jack cable assembly PE3C10456-18 is built with PE-118SR which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to 2.92mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 2.92mm jack bulkhead to 2.92mm jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to 2.92mm cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to 2.92mm RF cable assembly as per your requirements. | 1 : $499.99
10 : $489.99
25 : $479.99
100 : $469.99
|
| 2
|
PE3W00453/HS-9
| Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. Mini SMP Female to SMA Male Cable 9 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly mini SMP female to SMA male cable 9 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to SMA male cable 9 inch length using PE-SR405FLJ coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with mini SMP cable connection on one end and SMA cable connection on the other. Our mini SMP to SMA cable assembly has female gender on end 1 and male on end 2. PE3W00453/HS-9 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Mini SMP jack to SMA plug cable assembly PE3W00453/HS-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable Mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3W00453/HS-9 RF cable are available on our downloadable PDF datasheet.PE3W00453/HS-9 can also be used in the other direction and will be SMA male to mini SMP female cable assembly if the opposite connectivity is required. Mini SMP jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini SMP RF cable assembly as per your requirements. | 1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91
|
| 2
|
PE3C3045-48
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Female to Water Blue FAKRA Jack Low Loss Cable 48 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and FAKRA cable connection on the other. Our low loss SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. PE3C3045-48 can also be known as a low loss SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3C3045-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3045-48 can also be used in the other direction and will be FAKRA jack to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to water blue FAKRA jack low loss cable 48 inch length using LMR-100 coax. | 1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47
|
| 0
|
PE3M0450
| Pasternack Enterprises | | | 0
|
PE3W04513-36
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMB Plug Right Angle to SSMB Plug Cable 36 Inch Length Using RG174 Coax., Radio frequency assembly SMB plug right angle to SSMB plug cable 36 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug right angle to SSMB plug cable 36 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMB cable connection on one end and SSMB cable connection on the other. Our right angle SMB to SSMB cable assemblies have a plug gender on end 1 and plug on end 2. This SMB to SSMB cable is a plug to plug coax assembly, PE3W04513-36, can also be known as a right angle SMB male to SSMB male cable assembly and will be shipped same-day as it is purchased. SMB male to SSMB male cable assembly PE3W04513-36 is built with RG174 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMB right angle plug to SSMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04513-36 can also be used in the other direction and will be SSMB plug to right angle SMB plug cable assembly if the opposite connectivity is required. SMB right angle male to SSMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SSMB cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug right angle to SSMB plug cable 36 inch length using RG174 coax. | 1 : $82.99
25 : $78.84
50 : $74.69
100 : $71.37
|
| 0
|
PE3W04531
| Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm. BNC Female to TNC Male Cable Using RG8 Coax. PE3W04531 is a BNC female to TNC male cable using RG8 coax. This Pasternack BNC female to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our female BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04531 BNC female to TNC male cable assembly is constructed with RG8 coax. | | 0
|
PE3W04568
| Pasternack Enterprises | Key Specifications, Connector Series 1: D-Sub, Connector Gender 1: Receptacle, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. D-Sub Receptacle to BNC Male Cable Using RG142 Coax. PE3W04568 is a D-Sub receptacle to BNC male cable using RG142 coax. This Pasternack D-Sub receptacle to BNC male cable assembly uses a 50 Ohm D-Sub for connector 1 and a 50 Ohm BNC for connector 2. Our receptacle D-Sub to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04568 D-Sub receptacle to BNC male cable assembly is constructed with RG142 coax. | | 0
|
PE3W04582LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to HN Female Cable Using RG393 Coax, LF Solder. PE3W04582LF is a 7/16 DIN male to HN female cable using RG393 coax. This Pasternack 7/16 DIN male to HN female cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm HN for connector 2. Our male 7/16 DIN to female HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04582LF 7/16 DIN male to HN female cable assembly is constructed with RG393 coax. | | 0
|
PE3C1045LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. TNC Female to SMA Male Cable Using LMR-100 Coax, LF Solder. PE3C1045LF is a TNC female to SMA male cable using LMR-100A coax. This Pasternack TNC female to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our female TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1045LF TNC female to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W00459LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse P. PE3W00459LF/HS is a reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable using PE-SR405FLJ coax. This Pasternack reverse polarity SMA male right angle to reverse polarity SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female SMA bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W00459LF/HS SMA reverse polarity male right angle to SMA reverse polarity female bulkhead cable assembly is constructed with PE-SR405FLJ coax. | | 0
|
PE3W04509LF
| Pasternack Enterprises | Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 1.0/2.3 Jack Bulkhead Cable Using RG405 Coax, LF Solder. PE3W04509LF is a 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable using RG405 coax. This Pasternack 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our jack 1.0/2.3 bulkhead to jack 1.0/2.3 bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04509LF 1.0/2.3 jack bulkhead to 1.0/2.3 jack bulkhead cable assembly is constructed with RG405 coax. | | 0
|
PE3W04518LF/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder. PE3W04518LF/HS is a N male to UHF male cable using LMR-400-UF coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04518LF/HS N male to UHF male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE3W04530
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. 75 Ohm N Female to 75 Ohm N Female Cable Using 75 Ohm RG11 Coax. PE3W04530 is a N female to N female cable using RG11 coax. This Pasternack N female to N female cable assembly uses a 75 Ohm N for connector 1 and a 75 Ohm N for connector 2. Our female N to female N cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W04530 N female to N female cable assembly is constructed with RG11 coax. | | 0
|
PE3W04538/HS
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. | | 0
|
Win Source Electronics | TLV70450DBVR
 | Texas Instruments | IC REG LDO 5V 0.15A SOT23-5
RoHS : Compliant | 6,440 : $0.0466
5,155 : $0.0485
3,970 : $0.0504
2,770 : $0.0542
1,785 : $0.0561
835 : $0.0599
|
| 147,270
|
640456-3
| TE Connectivity | CONN HEADER VERT 3POS .100 TIN
RoHS : Compliant | 4,165 : $0.0721
3,110 : $0.0805
2,405 : $0.0832
1,745 : $0.086
1,130 : $0.0888
465 : $0.1082
|
| 61,029
|
0452007.MRL
| Littelfuse Inc | FUSE BRD MNT 7A 72VAC 60VDC 2SMD
RoHS : Compliant | 2,480 : $0.1212
1,850 : $0.1352
1,435 : $0.1398
1,040 : $0.1445
675 : $0.1491
280 : $0.1818
|
| 56,125
|
640456-2
| TE Connectivity | CONN HEADER VERT 2POS .100 TIN
RoHS : Compliant | 5,785 : $0.0519
4,330 : $0.0578
3,345 : $0.0598
2,430 : $0.0618
1,570 : $0.0638
645 : $0.0778
|
| 55,952
|
0451004.MRL
| Littelfuse Inc | FUSE BRD MNT 4A 125VAC/VDC 2SMD
RoHS : Compliant | 2,685 : $0.1119
2,150 : $0.1164
1,655 : $0.121
1,155 : $0.13
745 : $0.1346
350 : $0.1437
|
| 52,000
|
0453002.MR
| Littelfuse Inc | Surface Mount Fuses NANO2® > Very Fast-Acting > 451/453 Series
RoHS : Compliant | 2,020 : $0.1486
1,510 : $0.1657
1,170 : $0.1714
850 : $0.1771
550 : $0.1829
225 : $0.2229
|
| 20,000
|
0453010.MR
| Littelfuse Inc | FUSE BRD MNT 10A 125VAC/VDC SMD
RoHS : Compliant | 2,340 : $0.1283
1,750 : $0.1431
1,355 : $0.148
985 : $0.1529
635 : $0.1579
260 : $0.1924
|
| 20,000
|
LT3045EMSE#PBF
| Analog Devices Inc | IC REG LIN POS PROG 500MA 12MSOP
RoHS : Compliant | 58 : $5.2182
47 : $5.4304
36 : $5.6425
25 : $6.0667
16 : $6.2788
8 : $6.7031
|
| 19,120
|
LT3045EMSE#TRPBF
| Analog Devices Inc | IC REG LIN POS PROG 500MA 12MSOP
RoHS : Compliant | 58 : $5.2182
47 : $5.4304
36 : $5.6425
25 : $6.0667
16 : $6.2788
8 : $6.7031
|
| 18,430
|
LT3045IDD#TRPBF
| Linear Technology | IC REG LINEAR 0V 500MA 10DFN
RoHS : Compliant | 60 : $5.0319
48 : $5.2364
37 : $5.441
26 : $5.85
17 : $6.0546
8 : $6.4637
|
| 15,790
|
MBR4045PT
 | onsemi | DIODE ARRAY SCHOTTKY 45V TO247AD
RoHS : Compliant | 127 : $2.3637
95 : $2.6364
74 : $2.7273
54 : $2.8182
35 : $2.9091
15 : $3.5455
|
| 15,000
|
0458001.DR
| Littelfuse Inc | Surface Mount Fuses
RoHS : Compliant | 840 : $0.3573
630 : $0.3985
490 : $0.4122
355 : $0.4259
230 : $0.4397
95 : $0.5359
|
| 15,000
|
045202.5MRL
| Littelfuse Inc | FUSE BRD MNT 2.5A 125VAC/VDC SMD
RoHS : Compliant | 1,835 : $0.1638
1,370 : $0.1827
1,060 : $0.189
770 : $0.1953
500 : $0.2016
205 : $0.2457
|
| 10,000
|
CLF7045NIT-4R7N-D
| TDK Corporation | FIXED IND 4.7UH 4.1A 23MOHM SMD
RoHS : Compliant | 1,170 : $0.2565
875 : $0.2861
680 : $0.296
495 : $0.3058
320 : $0.3157
130 : $0.3847
|
| 5,000
|
10TQ045
| Vishay Huntington | 10 AMP SCHOTTKY RECTIFIERS | DIODE SCHOTTKY 45V 10A TO220AC | 2,410 : $0.1397
1,800 : $0.1558
1,390 : $0.1612
1,010 : $0.1665
655 : $0.1719
270 : $0.2094
|
| 2,665
|
Wuhan P&S | NTH4L045N065SC1
| onsemi | 650V, 43.8 m��,N-Channel Power MOSFET
RoHS : Compliant | 1 : $19.76
100 : $12.61
500 : $10.4
1,000 : $9.56
|
| 20,250
|
VS-12CTQ045-M3
| Vishay Intertechnologies | High Performance Schottky Rectifier, 45 V 6A
RoHS : Compliant | 1 : $2.54
100 : $0.85
500 : $0.79
1,000 : $0.77
|
| 4,000
|
STPS2045CTC
| STMicroelectronics | 45V,2 x 15A,Power Schottky Rectifier | 1 : $0.17
100 : $0.17
500 : $0.17
1,000 : $0.17
|
| 4,000
|
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand