| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
041F6HKP nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Bisco Industries | 10-104-1-044 | Staffall | 46,080 | |||
| 1614-00-00-4102 | ITW Shakeproof | 850 | ||||
| 1004146 | SOCKET SCREWS | 300 | ||||
| 316-93-110-41-003000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 150 | |||
| 210-83-320-41-101000 | Mill-Max Mfg Corp | RoHS : Not Compliant | 136 | |||
| 515-13-068-10-041001 | Mill-Max Mfg Corp | RoHS : Compliant | 92 | |||
| 14000-H-SS-.204-12 | Accurate Screw Machine | 70 | ||||
| 322-13-120-41-001000 | Mill-Max Mfg Corp | RoHS : Compliant | 66 | |||
| 5604-19 | Seastrom Mfg | 47 | ||||
| 5202104-1 | UNICORP | 43 | ||||
| 20-126-04-19 | BOLTS | 20 | ||||
| 53_N-50-0-4/133_UE | MISC. INDUSTRIAL CONNECTORS | 4 | ||||
| 47-10-204-10 | Southco | 2 | ||||
| C4060416 | Hubbell Premise Wiring | 1 | ||||
| MS20004-17 | MS Bolts | 1 | ||||
![]() Rochester Electronics | CY8C5667LTI-LP041 | Infineon Technologies AG | IC MCU ARM® Cortex®-M3 32Bit 1 Core FLASH 128kB (128k x 8) 67MHz 68-QFN Tray RoHS : Compliant |
| 5,055 | |
CD4041UBMT![]() | Texas Instruments | Inverter/Buffer, 4000/14000/40000 Series, 4-Func, 1-Input, CMOS, PDSO14 RoHS : Compliant |
| 3,000 | ||
LM4041DIZ-1.2/NOPB![]() | Texas Instruments | Video Amplifier Single-Ended 400MHz 8-SOIC Tube RoHS : Compliant |
| 765 | ||
LM4041QEEM3-1.2/NO![]() | Texas Instruments | IC VOL REF Shunt Fixed 4.096V 15mA ±0.1% SOT-23-3 T/R RoHS : Compliant |
| 22,480 | ||
LM5041MTC/NOPB![]() | Texas Instruments | Switching Controller, Current-mode, 0.01A, 1000kHz Switching Freq-Max, PDSO16 RoHS : Compliant |
| 5,383 | ||
| SN74FB2041RC | Texas Instruments | Bus Transceiver, FB Series, 1-Func, 7-Bit, Inverted Output, TTL, PQFP52 RoHS : Not Compliant |
| 5,124 | ||
LM4041D12ILP![]() | Texas Instruments | IC VOL REF Shunt Fixed 1.225V 12mA ±1% SOT-353 T/R RoHS : Compliant |
| 36,850 | ||
LM4041QBIM3-1.2/NO![]() | Texas Instruments | IC VOL REF Shunt Fixed 1.225V 12mA ±0.2% SOT-23-3 T/R RoHS : Compliant |
| 15,413 | ||
LMH0041SQX/NOPB![]() | Texas Instruments | IC VOLT REG Adjustable Step-Up Boost 1 OUT 3V - 40V (Switch) 1A (Switch) SOT-23-5 T/R RoHS : Compliant |
| 10,000 | ||
| 04184ARLAC-5N | IBM | IBM04184 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 841 | ||
| S40410081B1B2I000 | Cypress Semiconductor | FLASH - NAND (SLC) 8Gbit 1G x 8 2.7V - 3.6V eMMC 4.51 200MHz 100-BGA Tray RoHS : Compliant |
| 7 | ||
| LM4041DIZ-1.2/NOPB | National Semiconductor Corporation | Video Amplifier Single-Ended 400MHz 8-SOIC Tube RoHS : Compliant |
| 5,060 | ||
| LM5041MTC/NOPB | National Semiconductor Corporation | Switching Controller, Current-mode, 0.01A, 1000kHz Switching Freq-Max, PDSO16 RoHS : Compliant |
| 722 | ||
| R1LV0416DSB-7LI#B0 | Renesas Electronics Corporation | Standard SRAM, 256KX16, 70ns, CMOS, PDSO44 RoHS : Compliant |
| 85 | ||
| CRT9041B-011P | SMSC | CRT Video Attribute Controller, VAC RoHS : Not Compliant |
| 3,239 | ||
![]() TME | 204102-0419 | Molex | Connector: wire-wire; plug; male,female; Automotive; PIN: 4; 8.5mm |
| 314,500 | |
| T4041037041-000 | TE Connectivity | Connector: M8; socket; PIN: 4; female; industrial; 30V; straight RoHS : Compliant |
| 189 | ||
| 0411-204-1605 | TE Connectivity | Tool: for removal; contacts RoHS : Compliant |
| 150 | ||
| 0041.0411 | Schurter Electronic Components | Switch: push-button; SPDT; ON-(ON); IP40; Illumin: none; gold; THT RoHS : Compliant |
| 29 | ||
| 04120-00041-00 | tesa UK Ltd | Tape: packaging; W: 8mm; L: 66m; Thk: 0.049mm; brown; PVC film; 75% |
| 0 | ||
| 041041 | IRIMO | Wrench: hex key-set; inch; steel; 5pcs. |
| 0 | ||
| 10041041 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 22; THT; 1.5A; 60V |
| 0 | ||
| 104-1-041-0-F-LS0-0980 | MPE-Garry GmbH | Connector: pin strips; data; PIN: 41; THT; 3A; vertical; 2.54mm RoHS : Compliant |
| 0 | ||
| 0041041 | Lapp Group | Wire; flat; ÖLFLEX® CRANE F; 4G1.5mm2; unshielded; 300V,500V; Cu RoHS : Compliant |
| 0 | ||
| 7000-41041-6360200 | Murrelektronik GmbH | Connection lead; plug; PIN: 3; Contacts ph: 9.4mm; female; 24VDC RoHS : Compliant |
| 0 | ||
| 104-1-041-0-T-LS0-0980 | MPE-Garry GmbH | Connector: pin strips; data; PIN: 41; THT; 3A; vertical; 2.54mm RoHS : Compliant |
| 0 | ||
| L3041041 | Lahti Pro | Shoes; Size: 41; grey-red; chamois; with metal toecap |
| 0 | ||
| 7000-41041-6160200 | Murrelektronik GmbH | Connection lead; plug; PIN: 3; Contacts ph: 9.4mm; female; 24VDC |
| 0 | ||
| 7004-13041-0000000 | Murrelektronik GmbH | Connector: M12; plug; PIN: 5; female; industrial; angled 90°; IP67 |
| 0 | ||
| 104-1-041-0-F-LS0-1105 | MPE-Garry GmbH | Connector: pin strips; data; PIN: 41; THT; 3A; vertical; 2.54mm RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | BM1Q041FJ-E2 | ROHM Semiconductor | RoHS : Compliant |
| 7,750 | |
| PMST3904,115 | Infineon Technologies AG | 3,000 | ||||
| TJA1041T/CM | NXP Semiconductors | 2,868 | ||||
| X1G003621010414 | Epson Electronics America Inc | 2,618 | ||||
LM4041DFTA![]() | Diodes Incorporated | LM4041 Series 1.225 V ±1 % Precision Micropower Shunt Voltage Reference - SOT-23 RoHS : Compliant | 2,190 | |||
MIC94041YFL-TR![]() | Microchip Technology Inc | MIC94040 Series 3 A 55 mOhm Surface Mount High Side Load Switch - MLF-4 RoHS : Compliant | 1,230 | |||
| KLM4G1FETE-B041001 | Samsung Electronics Co. Ltd | 1,000 | ||||
| MBE04140C4703FC100 | NXP Semiconductors | 916 | ||||
| MBE04140C2203F | NXP Semiconductors | 595 | ||||
| MBE0414-50 | NXP Semiconductors | 541 | ||||
| BD82041FVJ-GE2 | ROHM Semiconductor | 1.5A 过流检测高边开关IC RoHS : Compliant |
| 250 | ||
R1LV0416DBG-5SI![]() | Renesas Electronics Corporation | RoHS : Not Compliant | 242 | |||
| LT3041ADE#TRPBF | Analog Devices Inc | RoHS : Compliant | 122 | |||
| LM4041BILT-1.2 | STMicroelectronics | IC: voltage reference source; 1.225V; ±0.2%; 12mA; SOT23 RoHS : Compliant | 42 | |||
| AT25DF041B-SSHN-T | Renesas Electronics Corporation | RoHS : Compliant | 41 | |||
![]() ComSIT USA | 436500413 | Molex | AVAILABLE EU RoHS : Compliant | 1,847 | ||
| C0604102REVEATR | WURSSI | AVAILABLE EU | 39,949 | |||
| 101366560411LF | Amphenol FCi | AVAILABLE EU | 3,467 | |||
| DDR504116002KL | LENOVO | AVAILABLE EU | 7,658 | |||
| 14620417 | AVAILABLE EU | 583 | ||||
| CRCW1210412RFKEAHP | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 26,250 | |||
| CEA212010326041 | Amphenol Corporation | AVAILABLE EU | 6,801 | |||
TPS2041BDBVR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,944 | |||
| 20411192 | TE Connectivity | AVAILABLE EU | 5,278 | |||
| 20411191 | TE Connectivity | AVAILABLE EU | 8,995 | |||
| 9CRH0412P5J005 | SANYO DENKI | AVAILABLE EU | 10,351 | |||
| 10146704102NLF | Amphenol Corporation | AVAILABLE EU | 587 | |||
| ACR10417661LF | BEICHI | AVAILABLE EU | 2 | |||
| TJA1041TCM118 | Nexperia | AVAILABLE EU | 4,200 | |||
| 430450416 | MOLEX INC | AVAILABLE EU | 288 | |||
![]() ComSIT USA | SDIA0418MT100 | Viking Technology | SMD POWER INDUCTOR General Purpose Inductor, 10uH, 30%, 1 Element, SMD, 1616 RoHS : Compliant | 275,860 | ||
| CKL04104R7MHJCCACWFTR | deroon | Electronic Component RoHS : Not Compliant | 8,000 | |||
| LM4041AELT12 | STMicroelectronics | PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE Two Terminal Voltage Reference, 1 Output, 1.225V, PDSO3 RoHS : Compliant | 3,000 | |||
| 22041041 | Molex | MINI-LATCH / KK WIRE-TO-BOARD HEADER, VERTICAL, WITH FRICTION RAMP Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 2,000 | |||
| MKP1G041506G00JYSD | Wima | POLYPROPYLENE (PP) CAPACITOR FOR PULSE APPLICATIONS WITH DOUBLE-SIDED METALLIZED ELECTRODES Film Capacitor, Polypropylene, 400V, 5% +Tol, 5% -Tol, 1.5uF, Through Hole Mount RoHS : Compliant | 880 | |||
LM4041CIDBZR![]() | Texas Instruments | PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE Two Terminal Voltage Reference, 1 Output, 1.225V, Trim/Adjustable, BIPolar, PDSO3 RoHS : Not Compliant | 880 | |||
VND14NV0413TR![]() | STMicroelectronics | OMNIFET II: FULLY AUTOPROTECTED POWER MOSFET Buffer/Inverter Based Peripheral Driver, 18A, PSSO2 RoHS : Not Compliant | 875 | |||
| STM32L041K6U6 | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, Cortex-M0+ CPU, 32MHz, CMOS, PQCC32 RoHS : Compliant | 295 | |||
| KCDC04106 | Kingbright | SURFACE MOUNT DISPLAY Smart/Normal 7 Seg Numeric LED Display, 2-Character, Super Bright Orange, 10.16mm RoHS : Compliant | 250 | |||
| KCDA04123P4 | Kingbright | SURFACE MOUNT DISPLAY Smart/Normal 7 Seg Numeric LED Display, 2-Character, Green, 10.16mm RoHS : Compliant | 250 | |||
| MLX878311041 | Molex | RECT CONN Header Male Pin Through Hole 10 POS 2mm Solder Gold Tube RoHS : Compliant | 168 | |||
| PX041306SPC | bulgin | Mains Power Connector, 5A, 125VAC/DC, Female, Solder Terminal RoHS : Compliant | 142 | |||
| UM61041 | United Microelectronics Corporation | Standard SRAM, 1KX4, 2000ns, CMOS, PDIP18 RoHS : Not Compliant | 100 | |||
| S40410161B1B2I010Z | Spansion | 16GBYTE, 3.0V E.MMC FLASH Flash, 16GX8, PBGA100 RoHS : Compliant | 46 | |||
| R1LV0414DSB5SIB0 | Renesas Electronics Corporation | 4M SRAM (256-KWORD X 16-BIT) Standard SRAM, 256KX16, 55ns, CMOS, PDSO44 RoHS : Not Compliant | 25 | |||
![]() GLYN GmbH & Co. KG | CC7V-T1A-200041-MG03 | Micro Crystal AG | CC7V-T1A, 32.768kHz, 9pF, 20ppm TA-QC -40 to +8 | 9,000 | ||
| CAB-GRE-PCAP-250-CG18041901 | Great Ideal Co Ltd | PCAP USB cable, 250mm, ePC to GLYN LVDS displays | 28 | |||
| CAB-GRE-BL-250-CG18041902 | Great Ideal Co Ltd | Backlight cable, 250mm, ePC to GLYN LVDS displays | 16 | |||
| A0417RKF1MA00 | Tianma Micro-electronics Co | TFT 4.20", 720x720, IPS, 1300cd, RGB (TTL) | 4 | |||
![]() PEI Genesis | 304-1006-000 | ITT Interconnect Solutions |
| 80 | ||
| AHDP04-18-14PR-C041 | Amphenol Sine Systems |
| 0 | |||
| S5304-1804-10 | SOURIAU-SUNBANK |
| 0 | |||
| 21-032904-041 | Amphenol Corporation |
| 0 | |||
| 21-203220-41S | Amphenol Corporation |
| 0 | |||
| 2104-1-J-W8 | HellermannTyton |
| 0 | |||
| 212504-1002 | Filconn |
| 0 | |||
| 171-804108-00 | Amphenol Socapex |
| 0 | |||
| 160-41LW24 | HellermannTyton |
| 0 | |||
| 1104-1B7WM250 | HellermannTyton |
| 0 | |||
| 120-41GW21 | HellermannTyton |
| 0 | |||
| 192900-0417 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| 10-573704-18X | Amphenol Corporation |
| 0 | |||
| 104-1HWM250 | HellermannTyton |
| 0 | |||
| 335104-14-0300 | Amphenol RF |
| 0 | |||
![]() PUI | 12.60041 | Geyer Electronic E K | RoHS : Compliant | 122,354 | ||
| 2041-2X07G10SA-A003 | 2,506 | |||||
| 12.60410 | 2,000 | |||||
| 109P0412K3013 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 1,512 | ||
| 8933-D104191GAACI12B | 1,500 | |||||
| 9A0624G4041 | Sanyo-Denki Co Ltd | RoHS : Compliant | 1,040 | |||
| 2041-2X15G00SA | 1,000 | |||||
| 2041-1X04G00SB | 900 | |||||
| 2041-B2X06G00DPT-M | 870 | |||||
| 2041-1X16G00SA | 845 | |||||
| 2041-2X08G00SA | 587 | |||||
| 2041-2X13G00SA | 493 | |||||
| 9GA0412P3G01 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 252 | ||
| 2041-1X10G00SA | 60 | |||||
| 600004107 | 1 | |||||
![]() Rutronik | MBE04140C4704FC100 | Vishay Intertechnologies | MBE0414 4,7M 1% 1W TK50 RoHS : Compliant |
| 20,000 | |
| 803-88-004-10-005101 | PRECI-DIP SSA | 04P Female Header 2R RA 2.54mm RoHS : Compliant |
| 16,000 | ||
| 204-10SYGD/S530-E2 | Everlight Electronics Co Ltd | 3MM SUPER YELLOW GREEN DIFFUSE RoHS : Compliant |
| 14,000 | ||
| ERA3AEB6041V | Panasonic Electronic Components | TF0603 6,04K 0,1% 0,1W TK25 RoHS : Compliant |
| 10,000 | ||
| CR21-6041-FL | ASJ Holdings Limited | RC0805 6,04K 1% 0,125W TK100 RoHS : Compliant |
| 10,000 | ||
| 110-87-310-41-001101 | PRECI-DIP SSA | 10P DIL SOCKET 300 MIL RoHS : Compliant |
| 6,478 | ||
| CSRV0204FTDV6041 | Viking Technology | MM0204 6,04K 1% 0,25W TK50 RoHS : Compliant |
| 6,000 | ||
| 110-87-640-41-001101 | PRECI-DIP SSA | 40P DIL SOCKET 600 MIL RoHS : Compliant |
| 5,170 | ||
| 110-87-320-41-001101 | PRECI-DIP SSA | 20P DIL SOCKET 300 MIL CONN RoHS : Compliant |
| 4,640 | ||
| 0412CDMCCDS-1R0MC | Sumida Corporation | 0412CDMCC 1,0uH 4,1 20% RoHS : Compliant |
| 3,000 | ||
| CAL9830415AEHHF0-RE02 | Hong Kong X'Tals Ltd | CA 5032 9,830400M 15pF 30ppm RoHS : Compliant |
| 2,000 | ||
| OQ0415510000G | Amphenol Interconnect Products Inc | 04P Pluggable_Header 3.50mm Green RoHS : Compliant |
| 1,600 | ||
| 37000500410 | Littelfuse Inc | 0.05A 250V fast TR5 long pins IEC RoHS : Compliant |
| 1,000 | ||
| 38212000410 | Littelfuse Inc | 2A 250V slow short pins IEC RoHS : Compliant |
| 1,000 | ||
| S25FL064LABNFI041 | Infineon Technologies AG | SPI NOR Flash 64M x8 65nm USON8 RoHS : Compliant |
| 246 | ||
![]() Chip 1 Exchange | 22-04-1041 | Molex | INSTOCK RoHS : Compliant | 141,720 | ||
| 204102-0419 | Molex | INSTOCK | 123,172 | |||
| 4-1601041-1 | TE Connectivity | INSTOCK RoHS : Compliant | 65,000 | |||
| 104127-0510 | Molex | INSTOCK | 40,682 | |||
| 504187-2871 | Molex | INSTOCK | 30,030 | |||
| 151120-0410 | Molex | INSTOCK | 21,060 | |||
| 504186-3600 | Molex | INSTOCK RoHS : Compliant | 13,000 | |||
| 02041-00020000 | INSTOCK | 8,570 | ||||
| 180414-0113 | Molex | INSTOCK | 8,385 | |||
| 22041041 | INSTOCK | 5,000 | ||||
| PC104-1184C-104G2 | INSTOCK | 3,552 | ||||
| 22-04-1041 | Molex | INSTOCK RoHS : Compliant | 1,270 | |||
| 196200-41041 | INSTOCK | 80 | ||||
| XS-2804-12.000MHZ 30PF + - 10P | INSTOCK | 74 | ||||
| 104-1-J | INSTOCK | 48 | ||||
![]() Avnet Abacus | 1-480417-0 | TE Connectivity | Conn Housing RCP 1 POS Crimp ST Loose Piece (Alt: 1-480417-0) RoHS : Compliant | 66,434 | ||
| 430450418 | Molex | Conn Power Header 4 POS 3mm Solder ST Surface Mount 4 Terminal 2 Port TR - Tape and Reel (Alt: 430450418) RoHS : Compliant | 62,200 | |||
| 10104111-0001LF | Amphenol Corporation | USB Connector Micro USB Type AB USB 20 Receptacle 5 Ways Surface Mount Right Angle - Tape and Reel (Alt: 10104111-0001LF) RoHS : Compliant | 38,000 | |||
| 22041041 | Molex | Pin Header Signal 25 mm 1 Rows 4 Contacts Through Hole Straight KK 5045 Series (Alt: 22041041) RoHS : Compliant | 18,000 | |||
| 10157375-04101LF | Amphenol Corporation | 10MM PITCH HEADER RIGHT ANGLE GOLD FLASH PLA - Tape and Reel (Alt: 10157375-04101LF) RoHS : Compliant | 16,500 | |||
| SDR0604-100ML | Bourns Inc | - Tape and Reel (Alt: SDR0604-100ML) RoHS : Compliant | 12,000 | |||
| 1-2448104-1 | TE Connectivity | Conn Housing Wire to Wire Housing Plug 4 POS 444mm ST Cable Mount (Alt: 1-2448104-1) RoHS : Compliant | 2,400 | |||
| 116-83-210-41-001101 | PRECI-DIP SSA | PRD1168321041001101 (Alt: 116-83-210-41-001101) RoHS : Compliant | 1,680 | |||
| AT04-12PA-RD01 | Amphenol Corporation | (Alt: AT04-12PA-RD01) RoHS : Compliant | 1,100 | |||
| T4041037041-000 | TE Connectivity | Sensor Connector M8 Female 4 Positions PCB Socket Straight Panel Mount (Alt: T4041037041-000) RoHS : Compliant | 900 | |||
| 116-87-610-41-006101 | PRECI-DIP SSA | Conn DIP Socket SKT 10 POS 254mm Solder ST ThruHole Card Box (Alt: 116-87-610-41-006101) RoHS : Compliant | 882 | |||
| T4041017041-000 | TE Connectivity | Sensor Connector M8 Female 4 Positions PCB Socket Straight Panel Mount (Alt: T4041017041-000) RoHS : Compliant | 791 | |||
| 0462-203-04141 | TE Connectivity | Circular Contact Socket Crimp ST Cable Mount (Alt: 0462-203-04141) RoHS : Compliant | 228 | |||
| MM-352-051-000-4100 | Molex | AirBorn M Series MicroD EMIRFI BackShell Straight Cable Exit Aluminum Shell (Alt: MM-352-051-000-4100) RoHS : Compliant | 5 | |||
| MM-252-037-000-4100 | Molex | AirBorn M Series MicroD EMIRFI BackShell Straight Cable Exit Aluminum Shell (Alt: MM-252-037-000-4100) RoHS : Compliant | 5 | |||
![]() Braemac Americas-Symmetry | SP500104-1 | DB Unlimited | Dynamic Speaker |
| 1 | |
ASPI-0504-101K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-182J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AFS14A04-1575.42-T3 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-152J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0410FS-220M-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-0504-120M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-1R0N-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-121J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-470M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CM6571-AEC-DBB100S0204100 | C-Media Electronics Inc | CM6571-AEC Eval Baord |
| 0 | ||
| SW401404-1 | DB Unlimited | Waterproof Dynamic Speaker |
| 0 | ||
ASPI-0418FS-2R2M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0504-121K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CAB.01041 | Taoglas Antenna Solutions | Coaxial Cable SMA to SMA, 9.8" Length |
| 0 | ||
![]() Component Electronics, Inc | 10104111-0001LF | Amphenol Corporation | IN STOCK SHIP TODAY |
| 1,000 | |
| 1041880110 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 900 | ||
| 050-050-415A | ITW Switches | IN STOCK SHIP TODAY |
| 700 | ||
| 0003092041 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 560 | ||
| 1041600000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 434 | ||
| 104128-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 196 | ||
| TSW-104-14-T-D | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 96 | ||
| 2204-12-201 | Coto Technology USA | IN STOCK SHIP TODAY |
| 79 | ||
| MKS2D041001K00KSSD | Wima | IN STOCK SHIP TODAY RoHS : Compliant |
| 30 | ||
| 050-040-415 | ITW Switches | IN STOCK SHIP TODAY |
| 22 | ||
| NPPN041BFCN-RC | Sullins Connector Solutions | IN STOCK SHIP TODAY RoHS : Compliant |
| 18 | ||
| 1825604-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
SUD50P04-15![]() | Vishay Siliconix | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 7 | ||
AT45DB041E-SSHN-B![]() | Adesto Technologies Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| 28-P20468L041 | Cinch Connectivity Solutions | IN STOCK SHIP TODAY | 3 | |||
![]() DB Roberts | E5-1-041-041 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | ||
| 77-04-104-13 | Southco | 0 | ||||
| 304110041556 | Essentra Components | 0 | ||||
| E5-2-041-041 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
| 20041786 | Essentra Components | 0 | ||||
| 20041830 | Essentra Components | 0 | ||||
| 2104-1032-S | RAF Electronic Hardware | 0 | ||||
| 1604-172-AL | RAF Electronic Hardware | NO PLATING, FEMALE STAND OFF | 0 | |||
| 12SWS0413 | Essentra Components | 0 | ||||
| 13RS075041B | Essentra Components | ROUND SPACER, .390 ID, .740 OD | 0 | |||
| 2404110000 | Essentra Components | LATCH, COMP T HANDLE ADJ GRIP | 0 | |||
| 2404120702 | Essentra Components | COMPRESSION LATCH T-HANDLE KEY | 0 | |||
| 12031041 | Avdel | TP114-667-5 | 0 | |||
| 301335041152 | Essentra Components | SPACER 5X35 M3 | 0 | |||
| 301360041152 | Essentra Components | 0 | ||||
![]() ECCO | 3041009000 | ITT Interconnect Solutions |
| 1,852 | ||
| 304-1009-000 | ITT Interconnect Solutions |
| 1,852 | |||
| 3041012000 | ITT Interconnect Solutions |
| 1,336 | |||
| 304-1218-000-MS | ITT Interconnect Solutions |
| 676 | |||
| AE776L20-41BW | Aero-Electric Connector Inc | 404 | ||||
| 3041008000 | ITT Interconnect Solutions |
| 356 | |||
| AE83371W2041N | Aero-Electric Connector Inc | RoHS : Not Compliant | 251 | |||
| M83723/72W2041N-LC | Aero-Electric Connector Inc | RoHS : Not Compliant | 251 | |||
| KPSE04-12-10P | ITT Interconnect Solutions | 209 | ||||
| AE83372W2041N | Aero-Electric Connector Inc | RoHS : Not Compliant | 198 | |||
| INSUL-ASSY-KPSE-E20-41P | ITT Interconnect Solutions |
| 100 | |||
| MS3470L20-41A | Aero-Electric Connector Inc | RoHS : Not Compliant | 37 | |||
| AE770L20-41B | Aero-Electric Connector Inc | 37 | ||||
| AE770L20-41A | Aero-Electric Connector Inc | 37 | ||||
| 351-1041-000 | ITT Interconnect Solutions |
| 1 | |||
![]() Flip Electronics | NTD3055L104-1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 48,750 | |
| CY7C1041DV33-10BVXIT | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant |
| 19,710 | ||
| AT25SF041-MAHD-T | Dialog Semiconductor GmbH | Stock, Ship Today RoHS : Compliant |
| 13,853 | ||
CY7C1041DV33-10BVI![]() | Cypress Semiconductor | Stock RoHS : Not Compliant | 13,706 | |||
| CY7C1041G30-10BVXI | Cypress Semiconductor | Stock RoHS : Compliant | 13,502 | |||
| CY7C1041GE-10VXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 6,433 | ||
| K32W041AMK | NXP Semiconductors | Stock RoHS : Compliant | 4,900 | |||
| AT45DB041E-SHN-T | Dialog Semiconductor GmbH | Stock, Ship Today RoHS : Compliant |
| 2,000 | ||
| Z86E0412PEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 846 | |||
| P3041NXE7MMC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 712 | |||
| FDPF041N06BL1 | onsemi | Stock RoHS : Compliant | 670 | |||
| P3041NXN7PNC | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 378 | |||
| P2041NSE7PNAC | NXP Semiconductors | Stock | 150 | |||
| MSP17LV041-E1-TH-001 | Infineon Technologies AG | Stock, Ship Today |
| 71 | ||
| CY7C1041G-10VXI | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 11 | ||
![]() Pasternack Enterprises US | PE3W04126-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W04126-36 can also be known as a low loss TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3W04126-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04126-36 can also be used in the other direction and will be right angle SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax with Times Microwave components. |
| 1,798 | |
| PE3C2404-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to BNC Male Cable 59.06 Inch Length Using LMR-240-UF Coax., Radio frequency assembly N male to BNC male cable 59.06 inch length using LMR-240-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to BNC male cable 59.06 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our low loss type N to BNC cable assemblies have a male gender on end 1 and male on end 2. This type N to BNC cable is a male to male coax assembly, PE3C2404-150CM, can also be known as a low loss type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to BNC plug cable assembly PE3C2404-150CM is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2404-150CM can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 59.06 inch length using LMR-240-UF coax. |
| 586 | ||
| PE3W00415-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Female Bulkhead to TNC Male Right Angle Cable 60 Inch Length Using LMR-240 Coax., Radio frequency assembly N female bulkhead to TNC male right angle cable 60 inch length using LMR-240 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to TNC male right angle cable 60 inch length using LMR-240 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type bulkhead cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This type N to TNC cable is a female to male coax assembly, PE3W00415-60, can also be known as a low loss type N jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type jack to TNC plug cable assembly PE3W00415-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00415-60 can also be used in the other direction and will be right angle TNC male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss N type jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to TNC male right angle cable 60 inch length using LMR-240 coax. |
| 240 | ||
| PE3FCA104-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to SC UPC, MM OM4, 2.0mm Riser, Aqua-10M. Pasternack’s PE3FCA104-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex SC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA104-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 87 | ||
| PE3FCA504-1M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Riser, Yellow-1M. Pasternack’s PE3FCA504-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA504-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA504-1M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 41 | ||
| PE3W04104-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female Bulkhead Low Loss Cable 12 Inch Length Using LMR-240 Coax with Times Microwave Components., Pasternack’s PE3W04104-12 low loss SMA male to type N female bulkhead RF cable assembly using LMR-240 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to type N female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with an SMA cable connection on one end and a type N bulkhead cable connection on the other. Our SMA to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W04104-12 can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04104-12 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to bulkhead type N female cable has a maximum VSWR of 1.4:1. This PE3W04104-12 SMA plug to type N jack cable assembly is built with LMR-240, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/non-solder contact attachment method and a brass body with tri-metal plating, while the other has the crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3W04104-12 can also be used in the other direction and will be a type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. This low loss SMA plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 37 | ||
| PE3W04105-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly N female bulkhead to SMA male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SMA male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a right angle SMA cable connection on the other. Our low loss type N to right angle SMA cable assembly has a female gender on end 1 and a male on end 2. PE3W04105-48 can also be known as a low loss type N jack to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04105-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our bulkhead type N female to right angle SMA male cable has a maximum VSWR of 1.4:1. Type N jack to SMA plug cable assembly PE3W04105-48 is built with LMR-240 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04105-48 can also be used in the other direction and will be a right angle SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 37 | ||
| PE3CA1041 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-P086EAM, RF Cable Type: PE-086FLEX, RF Cable Impedance: 50. SMA Male Right Angle to SMA Male Right Angle Cable Using PE-086FLEX Coax, RoHS. PE3CA1041 is a SMA male right angle to SMA male right angle cable using PE-086FLEX coax. This Pasternack SMA male right angle to SMA male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3CA1041 SMA male right angle to SMA male right angle cable assembly is constructed with PE-086FLEX coax and the maximum VSWR is 1.4:1. | 28 | |||
| PE3FCA404-15M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to ST UPC, OM1 Multimode Distribution Cable, 6.2mm Riser, 2.0mm breakout, Orange-15M. Pasternack’s PE3FCA404-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 12-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our orange fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA404-15M fiber optic cable with a 6.2 mm cable diameter and 62 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 23 | ||
| PE3M0412-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 8, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-141FL-NM, RF Cable Type: Coax, RF Cable Specification: PE-141FL-NM datasheet, RF Cable Impedance : 50 Ohm. MIL Size 8 Contact Socket to MIL Size 8 Contact Socket Cable 12 Inch Length Using PE-141FL-NM Coax with HeatShrink, LF Solder. The PE3M0412-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. The PE3M0412-12 RF cable has a copper jacket. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has silver plated copper as the cable’s inner conducting material and PTFE dielectric type. The PE3M0412-12 in-series RF cable has 0.375 inches of repeated minimum bend radius along with 90 dB of minimum RF shielding. M39029 socket to M39029 socket cable assembly is built with PE-141FL-NM, which is a formable coax type. The Pasternack PE3M0412-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 13 | ||
| PE3C10418-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 48 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 48 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-48 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-48 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8304-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 4.3-10 Male Right Angle to 7/16 DIN Female 4 Hole Flange Low PIM Cable 12 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male right angle to 7/16 DIN female 4 hole flange low PIM cable 12 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle 4.3-10 cable connection on one end and a 7/16 DIN 4 hole flange cable connection on the other. Our low PIM right angle 4.3-10 to 7/16 DIN cable assembly has a male gender on end 1 and a female on end 2. PE3C8304-12 can also be known as a low PIM right angle 4.3-10 plug to 7/16 DIN jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.26-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. 4.3-10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8304-12 RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our right angle 4.3-10 male to 4 hole flange 7/16 DIN female cable has a maximum VSWR of 1.4:1. 4.3-10 plug to 7/16 DIN jack cable assembly PE3C8304-12 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8304-12 can also be used in the other direction and will be a 7/16 DIN female 4 hole flange to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to 7/16 DIN jack 4 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.3-10 and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to 7/16 DIN low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04144 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SMA Female to SMA Male Cable Using RG178 Coax. PE3W04144 is a SMA female to SMA male cable using RG178 coax. This Pasternack SMA female to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04144 SMA female to SMA male cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W04152-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 150 inches. SMC Plug to MCX Plug Low Loss Cable 381 cm Length Using LMR-100 Coax., Radio frequency assembly SMC plug to MCX plug low loss cable 381 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMC plug to MCX plug low loss cable 381 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to MCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMC cable connection on one end and MCX cable connection on the other. Our low loss SMC to MCX cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to MCX cable is a plug to plug coax assembly, PE3W04152-150CM, can also be known as a low loss SMC male to MCX male cable assembly and will be shipped same-day as it is purchased. SMC male to MCX male cable assembly PE3W04152-150CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to MCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMC plug to MCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04152-150CM can also be used in the other direction and will be MCX plug to SMC plug cable assembly if the opposite connectivity is required. Low loss SMC male to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to MCX cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to MCX plug low loss cable 381 cm length using LMR-100 coax. |
| 0 | ||
| PE3W04173-144 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length, Max: 144 inches. HN Male Right Angle to HN Male Right Angle Cable 144 Inch Length Using RG217 Coax., Radio frequency assembly HN male right angle to HN male right angle cable 144 inch length using RG217 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The HN male right angle to HN male right angle cable 144 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle HN cable connection on one end and right angle HN cable connection on the other. Our right angle HN to right angle HN cable assembly has male gender on end 1 and male on end 2. PE3W04173-144 can also be known as a right angle HN plug to right angle HN plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. HN plug to HN plug cable assembly PE3W04173-144 is built with RG217 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with right angle HN to right angle HN cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W04173-144 RF cable are available on our downloadable PDF datasheet. HN right angle plug to HN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal HN RF cable assembly as per your requirements. |
| 0 | ||
![]() Venkel Ltd. | MELFC0102-UE-6041FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;6.04K;�1% RoHS : Compliant | 0 | ||
| MELFC0204-TC-6041DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;6.04K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-6041BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;6.04K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-XN-6041BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�10PPM;6.04K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-6041BT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;6.04K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-1041UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;1.04K;�0.01% RoHS : Compliant | 0 | |||
| HPTF0603-QN-6041FT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�10PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| HPTF0603-QP-6041BT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;6.04K;�0.1% RoHS : Compliant | 0 | |||
| HPTF2010-UE-6041AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;6.04K;�0.05% RoHS : Compliant | 0 | |||
| MELFC0102-RK-6041FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�100PPM;6.04K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-VE-6041DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;6.04K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0402-16W-N-6041AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�10PPM;6.04K;�0.05% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1041BT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.04K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0402-16W-P-1041CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;1.04K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-1041CT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;1.04K;�0.25% RoHS : Compliant | 0 | |||
![]() Vyrian | S40410081B1B2I000 | Infineon Technologies AG | Flash, 8GX8, PBGA100 | 17,044 | ||
| PT00E-20-41PSR | Amphenol Corporation | 41 Contact(s), Aluminum Alloy, Male, Solder Terminal, Receptacle RoHS : Not Compliant | 16,889 | |||
| AT04-12PA-RD01 | Amphenol Corporation | Combination Line Connector, 12 Contact(s), Male, Crimp Terminal, Receptacle RoHS : Compliant | 13,093 | |||
| AT04-12PA-PM13 | Amphenol Corporation | Combination Line Connector, 12 Contact(s), Male, Crimp Terminal, Receptacle RoHS : Compliant | 12,612 | |||
| 53M15-04-1-18N | Grayhill Inc | Rotary Switch, 18 Positions, SP18T, Latched, 0.25A, 28VDC, Screw Terminal, Flat Shaft Type Actuator, Panel Mount RoHS : Compliant | 11,268 | |||
| 2304131 | Phoenix Contact | EMI/EMD/EMC Protections RoHS : Compliant | 8,848 | |||
MT5C6404-15LAT![]() | Micron Technology Inc | Standard SRAM, 16KX4, 15ns, CMOS, PDIP22 RoHS : Not Compliant | 6,332 | |||
| 1052604-1 | TE Connectivity | RF SMA Connector, 1 Contact(s), Female, Panel Mount, Solder Terminal, Locking, Jack RoHS : Compliant | 5,094 | |||
| BQ500410NRGZR | Texas Instruments | 4,256 | ||||
| T4140412041-000 | TE Connectivity | Circular Connector, 4 Contact(s), Brass, Male, Solder Terminal, Plug RoHS : Compliant | 3,912 | |||
BQ500412RGZT![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, PQCC48 RoHS : Compliant | 3,794 | |||
| 0804183:0041 | Phoenix Contact | Terminal Block Accessory, Marking Item RoHS : Compliant | 769 | |||
| R1LV0416DSB-7LI#B0 | Renesas Electronics Corporation | Standard SRAM, 256KX16, 70ns, CMOS, PDSO44 RoHS : Compliant | 670 | |||
| 2001-1211/1000-411 | WAGO Innovative Connections | Modular Terminal Block RoHS : Compliant | 607 | |||
1410415![]() | Phoenix Contact | Circular Connector RoHS : Compliant | 428 | |||
![]() Waytek, Inc. | AL-04-18-9-M | Advanced Cable Ties Inc | ACT AL-04-18-9-M miniature cable tie is a natural 4" nylon 6/6 tie with 18 lb. tensile strength and a .87" maximum bundle diameter. Rated from -40F to 185F and packaged in bags of 1,000, it is designed to bundle wire, cable, hoses, and tubing. RoHS : Compliant |
| 251,000 | |
| AL-04-18-9-C | Advanced Cable Ties Inc | ACT AL-04-18-9-C miniature cable tie is a natural 4" nylon 6/6 tie with 18 lb. tensile strength and a .87" maximum bundle diameter. Rated from -40F to 185F and packaged in bags of 100, it is designed to bundle wire, cable, hoses, and tubing. |
| 60,600 | ||
| 19196-0041 | Molex | 16-14 GA # 10 Standard Spade Nylon Terminal Extra Sleeve BRASS SUPPORT SLEEVE |
| 13,939 | ||
| 19137-0041 | Molex | 12-10 GA # 10 Block Spade Terminal Nylon Extra Sleeve BRASS SUPPORT SLEEVE |
| 12,905 | ||
| 282404-1 | TE Connectivity | 22-20GA Male Plug Reel AMP SuperSeal 1.5 4000/Reel RoHS : Compliant |
| 12,000 | ||
| 282404-1 | TE Connectivity | 22-20GA Male Plug Loose AMP SuperSeal 1.5 RoHS : Compliant |
| 3,822 | ||
| 19164-0419 | Molex | Perma-Seal Ring Terminal Reel 22-18 Ga, #8 Stud, Heat Shrink Insulated, Mylar Tape RoHS : Compliant |
| 2,000 | ||
| 404-1231-032 | Trombetta | 12V Defender DC Contactor w/ 2 Pin Connector (DT06-25) |
| 1,616 | ||
| 0411-204-1605 | TE Connectivity / Deutsch | Deutsch Contact Size 16 REMOVAL TOOL 18-16 GA WIRE 0411-204-1605 - USE PN 609 |
| 1,100 | ||
| 34900-4120 | Molex | MXP120 Sealed 4 Circuit, Black Key A, Female Receptacle Disc Way No Repl RoHS : Compliant |
| 1,010 | ||
| AT04-12PC-SR2GN | Amphenol Sine Systems | AT Series 12 Position Pin Receptacle Key Position C, disc way, no repl |
| 992 | ||
| AT04-12PA-P030 | Amphenol Sine Systems | Amphenol Sine Systems AT04-12PA-P030 AT Series bussed receptacle is a 12-way, keyed A gray connector with contacts included. It uses four 3-pin busbars rated 13A each, nickel plating, and a sealed thermoplastic housing for Deutsch DT-compatible circuits. |
| 537 | ||
| AT04-12PA-P026 | Amphenol Sine Systems | Amphenol Sine Systems AT04-12PA-P026 AT Series bussed receptacle is a 12-way, keyed A gray connector with contacts included. It uses two 6-pin busbars rated 39A each, nickel plating, and a sealed thermoplastic housing for Deutsch DT-compatible circuits. |
| 502 | ||
| AHDP04-18-08SN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-08SN-SRA DuraMate AHDP receptacle is a shell size 18, 8-position socket circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 162 | ||
| AT04-18PABM14-X2-TS0 | Amphenol Sine Systems | 36 POS Power Splitter Control Module, 1 Threaded Stud & 12 Pin x 2 Device Layout, 225A |
| 36 | ||
![]() Wuhan P&S | G22041432709J2C000 | Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors RoHS : Compliant |
| 5,000 | |
| G22041431009J4C000 | Vishay Intertechnologies | Axial Vitreous Leaded Wirewound Resistors RoHS : Compliant |
| 1,000 | ||
IPP041N04NG![]() | Infineon Technologies AG | 40V,80A,N Channel Power MOSFET RoHS : Compliant |
| 500 | ||
| 20020004-D041B01LF | Amphenol FCi | Terminal Blocks : Pluggable plug, contact up side, 3.81 mm pitch, 4 position RoHS : Compliant |
| 300 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |