| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0404MD-V2-R5 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() ComSIT USA | PM1504040 | AVAILABLE EU | 722 | |||
![]() NexGen Digital | 74404042047 | Wurth Elektronik | RoHS : Compliant | 48,000 | ||
| 26-60-4040 | Molex | RoHS : Compliant | 239 | |||
![]() EBV Elektronik | AT88SC0404C-MJ | Microchip Technology Inc | (Alt: AT88SC0404C-MJ) RoHS : Compliant | 0 | ||
| SUM110N04-04-E3 | Vishay Intertechnologies | Trans MOSFET NCH 40V 110A 3Pin2Tab TO263 (Alt: SUM110N04-04-E3) RoHS : Compliant | 0 | |||
AT88SC0404CA-SH![]() | Microchip Technology Inc | (Alt: AT88SC0404CA-SH) RoHS : Compliant | 0 | |||
| SUM110P04-04L-E3 | Vishay Intertechnologies | (Alt: SUM110P04-04L-E3) RoHS : Compliant | 0 | |||
| BTS710404ESEXUMA1 | Infineon Technologies AG | Power Switch HiLo Side 4OUT 3A 24Pin TDSO TR (Alt: SP001225114) RoHS : Compliant | 0 | |||
| BTS710404ESPXUMA1 | Infineon Technologies AG | Power Load Distribution Switch High Side 4 Outputs 5V 00225ohm TSSOPEP 24Pin (Alt: SP005582330) RoHS : Compliant | 0 | |||
AT88SC0404CA-SH-T![]() | Microchip Technology Inc | (Alt: AT88SC0404CA-SH-T) RoHS : Compliant | 0 | |||
| SQM120P04-04L_GE3 | Vishay Intertechnologies | (Alt: SQM120P04-04L_GE3) RoHS : Compliant | 0 | |||
| ED040401/D16D-GREEN | Microchip Technology Inc | 4Bit8Bit MCU (Alt: ED040401/D16D-GREEN) RoHS : Compliant | 0 | |||
| QZCKC5TV-NW5X3040402 | Broadcom Limited | 1608 DFN2 Surface Mount LED (Alt: QZCKC5TV-NW5X3040402) RoHS : Compliant | 0 | |||
![]() Pasternack Enterprises US | PE3C10404 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-240-FR, RF Cable Type: TCOM-240-FR, RF Cable Impedance: 50 Ohm. Fire Rated N Male to SMA Male Low Loss Cable Using TCOM-240-FR Coax With Times Microwave Components., Radio frequency assembly fire rated N male to SMA male low loss cable using TCOM-240-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to SMA male low loss cable using TCOM-240-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss a type N to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10404 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10404 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 100 dB. Type N plug to SMA plug cable assembly PE3C10404 is built with TCOM-240-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10404 can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. | 145 | ||
| PE3M0404 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 D38999 Contact Socket to MIL Size 12 D38999 Contact Socket Cable Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0404 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0404 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0404 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. | 18 | |||
| PE3M0404-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Socket to MIL Size 12 Contact Socket Cable 6 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0404-6 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0404-6 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0404-6 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 3 | ||
| PE3M0404-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: M39029, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: M39029, Connector 2 Size: 12, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. MIL Size 12 Contact Socket to MIL Size 12 Contact Socket Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0404-12 from Pasternack is a D38999 contact cable assembly that is built with a size 12 M39029 socket contact connection on one end and a M39029 socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This M39029 to M39029 cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 3 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our M39029 socket to M39029 socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0404-12 in-series RF cable has 0.78 inches of repeated minimum bend radius. M39029 socket to M39029 socket cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0404-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this M39029 to M39029 RF cable are available on our downloadable PDF datasheet. M39029 socket to M39029 socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of M39029 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal M39029 to M39029 RF cable assembly as per your requirements. |
| 3 | ||
| PE3W04043LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MMCX Jack Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W04043LF/HS is a SMA male to MMCX jack cable using LMR-100A coax. This Pasternack SMA male to MMCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our male SMA to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04043LF/HS SMA male to MMCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W10404 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to SMA Male Cable Using PE-SR405FL Coax. PE3W10404 is a BMA jack to SMA male cable using PE-SR405FL coax. This Pasternack BMA jack to SMA male cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our jack BMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W10404 BMA jack to SMA male cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W04042/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male Right Angle to BNC Male Cable Using RG58 Coax with HeatShrink. PE3W04042/HS is a N male right angle to BNC male cable using RG58 coax. This Pasternack N male right angle to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N right angle to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04042/HS N male right angle to BNC male cable assembly is constructed with RG58 coax. | 0 | |||
| PE3C4040-4 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 4 inches. Snap-On MMBX Plug to N Female Bulkhead Cable 4 Inch Length Using RG174 Coax., Radio frequency assembly snap-on MMBX plug to N female bulkhead cable 4 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to N female bulkhead cable 4 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and type N bulkhead cable connection on the other. Our MMBX to N type cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to type N cable is a plug to female coax assembly, PE3C4040-4, can also be known as a MMBX male to type N jack cable assembly and will be shipped same-day as it is purchased. MMBX male to N type jack cable assembly PE3C4040-4 is built with RG174 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MMBX plug to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4040-4 can also be used in the other direction and will be type N female bulkhead to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to N type cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to N female bulkhead cable 4 inch length using RG174 coax. |
| 0 | ||
| PE3C0404 | Pasternack Enterprises | 0 | ||||
| PE3W04040 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Female Cable Using RG188 Coax. PE3W04040 is a SMA male right angle to N female cable using RG188 coax. This Pasternack SMA male right angle to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04040 SMA male right angle to N female cable assembly is constructed with RG188 coax. | 0 | |||
| PE3W04044/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MMCX Plug Low Loss Cable Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to MMCX plug low loss cable using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to MMCX plug low loss cable using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and MMCX cable connection on the other. Our low loss SMA to MMCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W04044/HS can also be known as a low loss SMA plug to MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE3W04044/HS is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MMCX cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04044/HS can also be used in the other direction and will be MMCX plug to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to MMCX plug low loss cable using LMR-100 coax with heatshrink. | 0 | |||
| PE3W04045 | Pasternack Enterprises | Key Specifications, Connector Series 1: LC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. LC Male to SHV Plug Cable Using LMR-195 Coax. PE3W04045 is a LC male to SHV plug cable using LMR-195 coax. This Pasternack LC male to SHV plug cable assembly uses a 50 Ohm LC for connector 1 and a 50 Ohm SHV for connector 2. Our male LC to plug SHV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04045 LC male to SHV plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04046 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Cable Using RG316 Coax. PE3W04046 is a SMA male to SMA female cable using RG316 coax. This Pasternack SMA male to SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04046 SMA male to SMA female cable assembly is constructed with RG316 coax. | 0 | |||
| PE3W04043/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to MMCX Jack Cable Using LMR-100 Coax. PE3W04043/HS is a SMA male to MMCX jack cable using LMR-100A coax. This Pasternack SMA male to MMCX jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MMCX for connector 2. Our male SMA to jack MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04043/HS SMA male to MMCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04048/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to SMA Male Cable Using RG188-DS Coax with HeatShrink. PE3W04048/HS is a MMBX plug right angle to SMA male cable using RG188-DS coax. This Pasternack MMBX plug right angle to SMA male cable assembly uses a 50 Ohm MMBX for connector 1 and a 50 Ohm SMA for connector 2. MMBX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMBX right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04048/HS MMBX plug right angle to SMA male cable assembly is constructed with RG188-DS coax. | 0 | |||
![]() Vyrian | SQM120P04-04L-GE3 | Vishay Intertechnologies | Power Field-Effect Transistor, 120A I(D), 40V, 0.004ohm, 1-Element, P-Channel, Silicon, Metal-oxide Semiconductor FET, TO-263AB RoHS : Compliant | 18,437 | ||
SP1004-04VTG![]() | Littelfuse Inc | Trans Voltage Suppressor Diode, 6V V(RWM), Bidirectional, 5 Element, Silicon RoHS : Compliant | 10,723 | |||
M38510/10404BEA![]() | Texas Instruments | Line Receiver, 2 Func, 2 Rcvr, BIPolar, CDIP14 RoHS : Not Compliant | 9,765 | |||
| TIDA-00404 | Texas Instruments | 9,038 | ||||
| M38510/00404BCB | Texas Instruments | NOR Gate, TTL/H/L Series, 3-Func, 3-Input, TTL, CDIP14 | 7,965 | |||
M38510/10404BEX![]() | Texas Instruments | Line Receiver, 2 Func, CDIP14 | 7,832 | |||
| T4171110404-001 | TE Connectivity | CIRCULAR CONNECTOR RoHS : Compliant | 6,095 | |||
| T2040482201-000 | TE Connectivity | Rectangular Connector, 24 Contact(s), Female RoHS : Compliant | 4,905 | |||
| M38510/00404BCA | Texas Instruments | NOR Gate, TTL/H/L Series, 3-Func, 3-Input, TTL, CDIP14 RoHS : Not Compliant | 4,342 | |||
M38510/10404BFA![]() | Texas Instruments | Line Receiver, 2 Func, CDFP16 | 4,168 | |||
V62/05604-04XE![]() | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 RoHS : Compliant | 4,070 | |||
V62/04604-04XE![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, +1.1V, PDSO8 RoHS : Compliant | 3,840 | |||
| M38510/00404BCX | Texas Instruments | NOR Gate, TTL/H/L Series, 3-Func, 3-Input, TTL, CDIP14 | 3,436 | |||
V62/04604-04YE![]() | Texas Instruments | Power Supply Support Circuit, Fixed, 1 Channel, +1.1V, PDSO8 RoHS : Compliant | 3,367 | |||
SST39SF040-45-4C-NHE![]() | Microchip Technology Inc | Flash, 512KX8, 45ns, PQCC32 RoHS : Compliant | 571 | |||
![]() Waytek, Inc. | AT60-204-0490 | Amphenol Sine Systems | Amphenol Sine Systems AT60-204-0490 ATHD male pin terminal is a size 4 pin contact for heavy-duty ATHD connector assemblies. It is designed for 6 gauge wire and pairs with ATHD sealed single-pole housings used in high-current power circuits. |
| 1,080 | |
| 19221-0404 | Molex | 4GA Copper Eyelet 1/4" Stud RoHS : Unknown |
| 127 | ||
![]() Win Source Electronics | 74404041047 | Wurth Elektronik | FIXED IND 4.7UH 1.55A 91MOHM SMD RoHS : Compliant |
| 22,500 | |
SP3004-04XTG![]() | Littelfuse Inc | TVS DIODE 6VWM 15VC SOT563 RoHS : Compliant |
| 21,000 | ||
| CBTL04043A1EX | Nexperia |
| 19,680 | |||
| 74404042470 | Wurth Elektronik | FIXED IND 47UH 600MA 620MOHM SMD RoHS : Compliant |
| 17,940 | ||
| SPM0404HE5H-PB-6 | Knowles Precision Devices | SISONIC MIC ENHANCED RF TOP PORT |
| 14,200 | ||
| FSUSB42UMX-SN00404 | onsemi | USB SWITCH / USB Switch IC 2 Channel 10-UMLP (1.8x1.4) |
| 10,000 | ||
| FP0404R1-R065-R | Eaton Bussmann | FIXED INDUCTOR 65NH 24A SMT / Inductor Power Wirewound 0.065uH/0.044uH 15% 100KHz Ferrite 19A 0.00032Ohm DCR 1515 T/R |
| 10,000 | ||
| BTS710404ESAXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:1 TSDSO-24 RoHS : Compliant |
| 8,580 | ||
| SRN8040-4R7Y | Bourns Inc | FIXED IND 4.7UH 4.1A 24 MOHM SMD / 4.7 µH Semi-Shielded Drum Core, Wirewound Inductor 4.1 A 24mOhm Max Nonstandard RoHS : Compliant |
| 8,319 | ||
| PI6C4931504-04LIEX | Diodes Incorporated | IC CLOCK BUFFER MUX 2:4 20TSSOP / Clock Fanout Buffer 4-OUT 2-IN 1:4 20-Pin TSSOP T/R RoHS : Compliant |
| 6,000 | ||
| SML-LX0404SIUPGUSB | ITW Lumex | LED RGB CLEAR SMD / 1.0 mm x 1.0mm P.C.B. SML, FULL COLOR, WATER CLEAR LENS, TAPE AND REEL RoHS : Compliant |
| 2,900 | ||
| 74404042047 | Wurth Elektronik | FIXED IND 4.7UH 1.7A 70 MOHM SMD RoHS : Compliant |
| 2,070 | ||
| PI7C9X20404SLCFDE | Diodes Incorporated | IC INTERFACE SPECIALIZED 128LQFP RoHS : Compliant |
| 1,550 | ||
PTH04040WAZ![]() | Texas Instruments | DC DC CONVERTER 0.8-2.5V 60A RoHS : Compliant |
| 1,036 | ||
PTH04040WAD![]() | Texas Instruments | DC DC CONVERTER 0.8-2.5V 60A RoHS : Compliant |
| 252 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |