| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
04-18EBH-RK nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() DigiKey | 29F0418-1SR-10 | Qnity Laird | FERRITE BEAD 119 OHM 8SMD 1LN RoHS : Compliant |
| 17,210 | |
| 29F0418-1SR-10 | Qnity Laird | FERRITE BEAD 119 OHM 8SMD 1LN RoHS : Compliant |
| 17,210 | ||
| BZG04-180-HM3-08 | Vishay Semiconductors | DIODE ZENER 220V 1.25W DO214AC |
| 5,476 | ||
| BZG04-180-HM3-08 | Vishay Semiconductors | DIODE ZENER 220V 1.25W DO214AC | 5,476 | |||
| M80-4181298 | Harwin | CONN RCPT HSG 12POS 2.00MM RoHS : Compliant |
| 2,057 | ||
| E70418 | Automation Products Group | O-RING EPDM BLACK -418 |
| 1,400 | ||
| BZG04-180-HM3-08 | Vishay Semiconductors | DIODE ZENER 220V 1.25W DO214AC |
| 976 | ||
| D20418123 | ITT Interconnect Solutions | D SUB |
| 773 | ||
| AHDP04-18-06SN-BRAC030 | Amphenol Sine Systems | 2 POSITION RECEPTACLE, SOCKET, S |
| 298 | ||
| D20418-J3R | Japan Aviation Electronics Industry Limited | DSUB SCREW LOCK RoHS : Compliant |
| 188 | ||
| MCU 704-1/8 | Camozzi SpA | Unidirectional flow controllers |
| 74 | ||
| AHDP04-18-08SR-BRA | Amphenol Sine Systems | 8 POSITION RECEPTACLE, SOCKET, S |
| 50 | ||
| AHDP04-18-08PR-WTA | Amphenol Sine Systems | CONN RCPT HSG MALE 8POS PNL MNT |
| 23 | ||
| MAP-40-4-1/8-EN | Festo | PRECISION PRESSURE GAUGE RoHS : Compliant |
| 4 | ||
| 850-418 | Mecmesin Ltd | FORCE GAUGE 24.95KGF LCD |
| 1 | ||
![]() Avnet Americas | MIC5504-1.8YM5-TR![]() | Microchip Technology Inc | LDO Voltage Regulator, Fixed, 2.5 to 5.5V in, 160 mV Drop, 1.8V / 0.3A Out, SOT-23-5, -40 to 125?C - Tape and Reel (Alt: MIC5504-1.8YM5-TR) RoHS : Compliant |
| 12,000 | |
| D20418-14 | ITT Interconnect Solutions | D Sub Jack Screw, 7.92 mm, 4-40 UNC-2A - Bag (Alt: 020418-0014) RoHS : Compliant |
| 2,285 | ||
| 26-60-4180 | Molex | Conn Wire to Board HDR 18 POS 3.96mm Solder ST Thru-Hole Bag - Bulk (Alt: 0026604180) RoHS : Compliant |
| 1,350 | ||
| D2041852 | ITT Interconnect Solutions | Connector Accessories Locking Hardware Brass Gold Over Copper - Bulk (Alt: D2041852) RoHS : Not Compliant |
| 919 | ||
| D20418-74 | ITT Interconnect Solutions | - Bag (Alt: 020418-0074) RoHS : Not Compliant |
| 566 | ||
| D20418-135 | ITT Interconnect Solutions | - Bulk (Alt: D20418-135) RoHS : Compliant |
| 347 | ||
| D2041874 | ITT Interconnect Solutions | - Bulk (Alt: D2041874) RoHS : Not Compliant |
| 220 | ||
| L17D204182X | Amphenol Corporation | D Sub Jack Screw, w/ Washer & Nut, 8.3 mm, #4-40 - Bag (Alt: L17D204182X) RoHS : Compliant |
| 200 | ||
| L17D204182TX | Amphenol Corporation | D Sub Jack Screw, 17D, 12.9 mm, M5, 4-40 - Bag (Alt: L17D204182TX) RoHS : Compliant |
| 200 | ||
| AHDP04-18-06PN-WTAC030 | Amphenol Corporation | Size 18 receptacle, 2 positions, pin, standard arrangement, normal seal,wide thread adapterSTANDARD DIA. SEAL, AHDP SERIES - Boxed Product (Development Kits) (Alt: AHDP04-18-06PN-WTAC030) RoHS : Compliant |
| 140 | ||
| AHDP04-18-14PN-SRA | Amphenol Corporation | Size 18 receptacle, 14 positions, pin, standard arrangement, normal seal, smooth ring adapter - Boxed Product (Development Kits) (Alt: AHDP04-18-14PN-SRA) RoHS : Compliant |
| 80 | ||
| AHDM04-18-20SN | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDM04-18-20SN) RoHS : Compliant |
| 50 | ||
| AHDP04-18-14PR-WTA | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDP04-18-14PR-WTA) RoHS : Compliant |
| 33 | ||
| AHDP04-18-20PN-WTA | Amphenol Corporation | Circular Connector, IP67, IP69K, DuraMate AHDP Series, Panel Mount Receptacle, 20 Contacts - Boxed Product (Development Kits) (Alt: AHDP04-18-20PN-WTA) RoHS : Compliant |
| 30 | ||
| 10004-18KS | Vishay Intertechnologies | T18S477K100T4ESZ - Bulk (Alt: 10004-18KS) RoHS : Not Compliant |
| 20 | ||
![]() Newark | 640418-2 | TE Connectivity | FEMALE QUICK DISCONNECT, 6.35MM/18-14AWG; Product Range:FASTIN-FASTON 250 Series; Terminal Type:Female Quick Disconnect; Tab Size - Metric:-; Tab Size - Imperial:-; Wire Size AWG Min:18AWG; Wire Size AWG Max:14AWG; Insulator Colour:-RoHS Compliant: Yes RoHS : Compliant |
| 1,276 | |
| 686104188822 | Wurth Elektronik | CONNECTOR, FFC, 4POS, 1 ROW, 1MM; RoHS : Compliant |
| 950 | ||
| 686104188822 | Wurth Elektronik | CONNECTOR, FFC, 4POS, 1 ROW, 1MM; RoHS : Compliant |
| 411 | ||
| AHDP04-18-06SN-SRA | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 6POS, PANEL; Product Range:DuraMate AHDP Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:6Contacts; Circular Contact Type:Crimp Socket - Contacts Not Supplied; Contact Material:- RoHS Compliant: Yes RoHS : Compliant |
| 190 | ||
| AHDP04-18-06SN-BRAC030 | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 2POS, CRIMP; Product Range:DuraMate AHDP Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:2Contacts; Circular Contact Type:Crimp Socket - Contacts Not Supplied; Contact Material:- RoHS Compliant: Yes RoHS : Compliant |
| 150 | ||
| 1840418 | Phoenix Contact | TB PLUGGABLE, 3.5MM, 7POSITIONS, 28AWG; RoHS : Compliant |
| 138 | ||
| AHDP04-18-06PN-BRAC030 | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 2POS, CRIMP; Product Range:DuraMate AHDP Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:2Contacts; Circular Contact Type:Crimp Pin - Contacts Not Supplied; Coupling Style:Bayonet RoHS Compliant: Yes RoHS : Compliant |
| 138 | ||
| AHDM04-18-14SN-059 | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 14POS, PANEL; Product Range:DuraMate AHDM Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:14Contacts; Circular Contact Type:Crimp Socket - Contacts Not Supplied; Contact Material:- RoHS Compliant: Yes RoHS : Compliant |
| 103 | ||
| AHDP04-18-14PR-BRA | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 14POS, CRIMP; RoHS : Compliant |
| 67 | ||
| MP004189 | SPC Multicomp | SNUBBER CAPACITOR, 0.47UF, 10%, 850V; RoHS : Compliant |
| 29 | ||
| AHDM04-18-14SN-059 | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 14POS, CRIMP; RoHS : Compliant |
| 24 | ||
| AHDP04-18-08PN-WTA | Amphenol Sine Systems | CIRCULAR CONNECTOR, RCPT, 8POS, PANEL; Product Range:DuraMate AHDP Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:8Contacts; Circular Contact Type:Crimp Pin - Contacts Not Supplied; Contact Material:- RoHS Compliant: Yes RoHS : Compliant |
| 19 | ||
| AHDM04-18-14PN-059 | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 14POS, CRIMP; RoHS : Compliant |
| 16 | ||
| AHDP04-18-08SR-BRA | Amphenol Sine Systems | CIRCULAR CONN, RCPT, 8POS, CRIMP; Product Range:DuraMate AHDP Series; Circular Connector Shell Style:Panel Mount Receptacle; No. of Contacts:8Contacts; Circular Contact Type:Crimp Socket - Contacts Not Supplied; Contact Material:- RoHS Compliant: Yes RoHS : Compliant |
| 5 | ||
| 1404180 | Phoenix Contact | SENSOR CORD, 8P, M8 PLUG-FREE END, 3M; RoHS : Compliant |
| 2 | ||
![]() RS | B1440004 (1825612-1) | TE Connectivity | ACCESSORY, SWITCH, BOOT SEAL, BLACK, ROHS, ELV COMPLIANT, FOR TOGGLE SWITCH |
| 889 | |
| C24470418 | Norgren | ADAPTER FITTING, ELBOW 1/4 X 1/8 NPT |
| 718 | ||
| D24250418 | Norgren | ADAPTOR, STRAIGHT, 1/4OD TUBE, 1/8NPTF |
| 84 | ||
| 1SNA110418R2500 (011041825) | TE Connectivity | D4/6.A.LLP, ENTRELEC |
| 40 | ||
| AHDP04-18-06PN-SRA | Amphenol Sine Systems | 6 POSITIONS, RECEPTACLE, PIN, SHELL SIZE 18, NORMAL DIAMETER SEA (GREEN)L, SRA |
| 37 | ||
| AHDP04-18-06SN-SRA | Amphenol Sine Systems | 6 POSITIONS, RECEPTACLE, SOCKET, SHELL SIZE 18, NORMAL DIAMETER SEAL, SRA |
| 37 | ||
| AHDP04-18-21PN-WTA | Amphenol Sine Systems | 21 POSITIONS, RECEPTACLE, PIN, SHELL SIZE 18, NORMAL DIAMETER SEAL (GREEN), WTA |
| 20 | ||
| C23204 (1825069-2) | TE Connectivity | ALCOSWITCH, CAP, PUSHBUTTON, RED, SERIES MPA6, SERIES MPE, SERIES MPS, SERIES MSPM |
| 10 | ||
| 0804183:0011 (SK 5/3 8:FORTL.ZAHLEN 11-20) | Phoenix Contact | MARKER CARD PRINT HORIZONTALLY 11 TO 20 SK SERIES |
| 10 | ||
| C24670418 | Norgren | FITTING, SWIV TEE ADPT 1/4 X 1/4 X 1/8 |
| 8 | ||
| AHDP04-18-08PN-WTA | Amphenol Sine Systems | 8 POSITIONS, RECEPTACLE, PIN, SHELL SIZE 18, NORMAL DIAMETER SEAL (GREEN), WTA |
| 8 | ||
| 2041810 | SAB Bröckskes | CONTROL CABLE, 10C, 18 AWG, 30X32, 600 V, GRAY PVC JKT, UL CSA |
| 5 | ||
| ATV04-18PA-BUS | Amphenol Sine Systems | CONNECTOR,18-WAY RECEPTACLE, KEY A, BUSS |
| 4 | ||
| 110-93-640-41-801000 | Mill-Max Mfg Corp | CONN IC SOCKET DIP 40 INTEGRAL DECOUPLING CAPACITOR OPEN 110 SERIES THRU-HOLE RoHS : Not Compliant |
| 2 | ||
| 132123TB-H-BX (0075004184) | Dichtomatik | OIL SEAL, 1.375" ID, 2.125" OD, 0.313" WIDTH, N701R MATERIAL |
| 2 | ||
![]() Microchip Technology Inc | MIC5504-1.8YMT-TZ![]() | Microchip Technology Inc | Single 300mA LDO with Enable Pull-Down & Auto Discharge, UDFN, Projected EOL: 2041-01-22 RoHS : Compliant |
| 599 | |
MIC5504-1.8YM5-TR![]() | Microchip Technology Inc | Single 300mA LDO with Enable Pull-Down & Auto Discharge, SOT-23, Projected EOL: 2041-03-13 RoHS : Compliant |
| 74 | ||
MIC5504-1.8YM5-T5![]() | Microchip Technology Inc | Single 300mA LDO with Enable Pull-Down & Auto Discharge, SOT-23, Projected EOL: 2028-10-18 RoHS : Compliant |
| 0 | ||
| MIC5504-1.8YMT-T5 | Microchip Technology Inc | Single 300mA LDO with Enable Pull-Down & Auto Discharge, UDFN, Projected EOL: 2028-10-18 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC5504-1.8YMT-TR | Microchip Technology Inc | Single 300mA LDO with Enable Pull-Down & Auto Discharge, UDFN, Projected EOL: 2040-10-26 RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | 04184ARLAD-6N | IBM | IBM04184 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 25,724 | |
| 04184QLAD-5 | IBM | IBM04184 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 499 | ||
| 041811CLAB-5 | IBM | 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 4,955 | ||
| 0418A1ACLAA-50 | IBM | 4Mbit (64K x 18) SRAM RoHS : Not Compliant |
| 218 | ||
| 0418A4ACLAA-4H | IBM | 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 1,543 | ||
| 04184ARLAC-5N | IBM | IBM04184 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 841 | ||
| 0418A4ACLAA-4F | IBM | 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 7,648 | ||
| 041841QLAD-4 | IBM | IBM041841 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 4,096 | ||
| 04188CBLB-28 | IBM | IBM04188 - 8Mb (512K x 18) SRAM RoHS : Not Compliant |
| 74 | ||
| 041841WKAB-3 | IBM | IBM041841 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 360 | ||
| 0418A81XLAA-4 | IBM | 8Mbit (512K x 18) SRAM RoHS : Not Compliant |
| 811 | ||
| 041841QLAD-6 | IBM | 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 393 | ||
| 0418A81QLAA-4 | IBM | 8Mbit (512K x 18) SRAM RoHS : Not Compliant |
| 19,993 | ||
| 04184ARLAC-6P | IBM | IBM04184 - 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 3,008 | ||
| 0418A41QLAA-4 | IBM | 4Mbit (256K x 18) SRAM RoHS : Not Compliant |
| 2,880 | ||
![]() Sager | HBTT0418SW | Hubbell Incorporated | WB,PRFRM RADI T, 4HX18W, PREGALV,STLWLL |
| 0 | |
| FFSD-14-D-04.18-01-N-RN1 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| PMSD-04-18-K-10.00-S | Samtec Inc | Rectangular Cable Assemblies .165 Power Mate Double Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| PMSDT-04-18-K-12.00-S-M | Samtec Inc | Rectangular Cable Assemblies | 0 | |||
| PMSS-04-18-K-03.50-S | Samtec Inc | Rectangular Cable Assemblies .165 Power Mate Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-04.00-D-LUS | Samtec Inc | Rectangular Cable Assemblies .165 Power Mate Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-08.00-S | Samtec Inc | Rectangular Cable Assemblies .165 Power Mate Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-20.00-D-LUS | Samtec Inc | Rectangular Cable Assemblies .165 Power Mate Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-95.00-D-LUS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| 9750504180 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9760418017 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9760418062 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855504186 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855604185 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9855804183 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
![]() TME | 42385-0418 | Molex | Connector: wire-board |
| 10,240 | |
| 5-104186-9 | TE Connectivity | Pin header; male; PIN: 15; THT; Inom: 3.6A; angled; Imax: 3.6A; 1.27mm RoHS : Compliant |
| 390 | ||
| 004181404 | ETI Polam | Fuse: fuse; NH00C; ceramic,industrial; 10A; 690VAC; aM; WT-NH |
| 4 | ||
| 50900 4-1/8 | AIGNEP | Common supply manifold; plug-in; -0.99÷20bar; Thread: 1/8" |
| 0 | ||
| 7000-44041-8410250 | Murrelektronik GmbH | Cable: for sensors; PIN: 4; M12 male angled,M12 female straight |
| 0 | ||
| 7000-46041-8020200 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; M12 male angled,M12 female straight RoHS : Compliant |
| 0 | ||
| 7001-46041-8020060 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; 0.6m; 30VDC; 30VAC; 4A; Cores: 6; 7001; PUR |
| 0 | ||
| 7001-46041-8020100 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; 1m; 30VDC; 30VAC; 4A; Cores: 6; 7001; PUR |
| 0 | ||
| AHDM04-18-08PN-059 | Amphenol Corporation | Connector: automotive; socket,plug; male; DuraMate AHDM; PIN: 8 RoHS : Compliant |
| 0 | ||
| AHDM04-18-14PR | Amphenol Corporation | Connector: automotive; socket,plug; male; DuraMate AHDM; PIN: 14 RoHS : Compliant |
| 0 | ||
| AHDP04-18-06SN-BRA | Amphenol Corporation | Connector: automotive; socket,plug; female; DuraMate AHDP RoHS : Compliant |
| 0 | ||
| AHDP04-18-14SR-WTA | Amphenol Corporation | Connector: automotive; socket,plug; female; DuraMate AHDP; PIN: 14 RoHS : Compliant |
| 0 | ||
| AHDP04-18-20PR-SRA | Amphenol Corporation | Connector: automotive; socket,plug; male; DuraMate AHDP; size 18 RoHS : Compliant |
| 0 | ||
| AHDP04-18-20SN-WTA | Amphenol Corporation | Connector: automotive; socket,plug; female; DuraMate AHDP RoHS : Compliant |
| 0 | ||
| 004181201 | ETI Polam | Fuse: fuse; NH000; ceramic,industrial; 2A; 500VAC; 250VDC; gG; WT-NH |
| 0 | ||
![]() Ameya Holding Limited | TLV70418DBVR | Texas Instruments | RoHS : Compliant | 63,786 | ||
![]() ComSIT USA | 51104180000ZINC | SHAKEPROOF | AVAILABLE EU | 362 | ||
![]() ComSIT USA | SDIA0418MT100 | Viking Technology | SMD POWER INDUCTOR General Purpose Inductor, 10uH, 30%, 1 Element, SMD, 1616 RoHS : Compliant | 275,860 | ||
| T60405A4185X04181 | vac | Electronic Component RoHS : Compliant | 16,567 | |||
| LSFSMT500418035SNBKTU | Weidmüller Interface GmbH & Co. KG | Electronic Component RoHS : Compliant | 8,064 | |||
| BZG0418TR | Vishay Intertechnologies | ZENER DIODE WITH SURGE CURRENT SPECIFICATION Trans Voltage Suppressor Diode, 300W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC RoHS : Compliant | 3,000 | |||
| MIC550418YM5T5 | Micrel Inc | SINGLE 300 MILLI AMP LDO Fixed Positive LDO Regulator, 1.8V, CMOS, PDSO5 RoHS : Compliant | 500 | |||
| MIC550418YM5TR | mct | IC VOLT REG Fixed 1 REG 1.8V 300mA SOT-23-5 T/R RoHS : Compliant | 477 | |||
| BL35004180FSNORBX | Weidmüller Interface GmbH & Co. KG | Electronic Component RoHS : Compliant | 84 | |||
| SL508HC04180F32SNORBX | Weidmüller Interface GmbH & Co. KG | Electronic Component RoHS : Not Compliant | 55 | |||
![]() Interstate Connecting Components | M83723/78R20418 L/C | Conesys | RFI PLUG, PIN, 83723 SIII BAYONET |
| 48 | |
| M83723/73G20418 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII BAYON |
| 0 | ||
| M83723/75A20418 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET |
| 0 | ||
| M83723/96R20418 L/C | Conesys | SELF LOCKING PLUG, PIN, 83723 SIII THREA |
| 0 | ||
| AHDP04-18-08PN-SRA | Amphenol Sine Systems |
| 0 | |||
| AHDP04-18-08SR-BRA | Amphenol Sine Systems | 8 POSITION RECEPTACLE, SOCKET, | 0 | |||
| D20418123 | ITT Interconnect Solutions | 020418-0123 |
| 0 | ||
| AT04-18PE-BM04BK | Amphenol Sine Systems | 18 POSITION PCB BOARD MOUNT RE | 0 | |||
| D20418-102 | ITT Interconnect Solutions | DSUB SI SCREW LOCK ASSY 020418-0102 |
| 0 | ||
| M83723/82A20418 | Conesys | WALL MT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/83R20418 | Conesys | WALL MT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/84A20418 L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| M83723/85R20418 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/86W20418 | Conesys | STD PLUG, SOCKET, 83723 SIII THREADED |
| 0 | ||
| FLDWC6004-18-4 | TE Connectivity | FLDWC6004-18-4 | 0 | |||
![]() NexGen Digital | 504189-1670 | Molex | 487 | |||
| 0430450418 | Molex | RoHS : Compliant | 200 | |||
| 504189-3270 | Molex | 111 | ||||
| AS-9.8304-18-SMD-TR | Raltron Electronics Corporation | RoHS : Compliant | 60 | |||
| D20418-50 | ITT Interconnect Solutions | RoHS : Not Compliant | 50 | |||
![]() PEI Genesis | FRCIRG06WK10418-19SF80T108VO | ITT Interconnect Solutions |
| 0 | ||
| M83723/75A20418 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AHDP04-18-08PN-SRA | Amphenol Sine Systems |
| 0 | |||
| AHDP04-18-08SR-BRA | Amphenol Sine Systems |
| 0 | |||
| AE83383G20418 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| D20418-120 | ITT Interconnect Solutions |
| 0 | |||
| D20418-102 | ITT Interconnect Solutions |
| 0 | |||
| D20418-139 | ITT Interconnect Solutions |
| 0 | |||
| D20418-36 | ITT Interconnect Solutions |
| 0 | |||
| M83723/82A20418 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/83R20418 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/86W20418 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AHDP04-18-06SN-BRAC030 | Amphenol Sine Systems |
| 0 | |||
| AHDP04-18-08PR-WTA | Amphenol Sine Systems |
| 0 | |||
| 304-1871 | Dialight |
| 0 | |||
![]() Powell Electronics | AL-04-18-4-C | Advanced Cable Ties Inc | Miniature Cable Ties, 18 lb, 4 inch, Yel |
| 7,460 | |
| 3-2304185-2 | TE Connectivity | TE COMPONENT (REF 3-2304185-2) RoHS : Compliant |
| 7,128 | ||
| AL-04-18-8-C | Advanced Cable Ties Inc | Miniature Cable Ties, 18 lb, 4 inch, Gra |
| 6,660 | ||
| AHDP04-18-08PR-WTA | Amphenol Sine Systems | 8 Pos Receptacle Pin Shell Sz 18 |
| 1,353 | ||
| TSW-104-18-G-S | Samtec Inc | .100 Terminal Strip RoHS : Compliant |
| 941 | ||
| HTSW-104-18-T-S | Samtec Inc | High Temperature PCB Header Strips, 0.10 RoHS : Compliant |
| 744 | ||
| AHDP04-18-08PN-WTA | Amphenol Sine Systems | 8 Pos Receptacle Pin Shell Sz 18 |
| 528 | ||
| 004181215 | Altech Corporation | Fuse,NH00C,gG,M,125A,500VAC |
| 164 | ||
| 91-542604-18S | Amphenol Corporation | RECEPT |
| 110 | ||
| 2204188-4 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 50 | ||
| 91-552004-18P | Amphenol Corporation | RECEPT |
| 37 | ||
| 88-463404-18S | Amphenol Corporation | RECEPT |
| 15 | ||
| 88-538204-18L | Amphenol Corporation | RECEPT |
| 6 | ||
| 041809-000 | TE Connectivity | Data Bus Components RoHS : Not Compliant |
| 3 | ||
| 87-443104-18E | Amphenol Corporation | RECEPT |
| 2 | ||
![]() PUI | 8004-18T3U | 19 | ||||
| 780418 | 2 | |||||
![]() Richardson RFPD | SI5338P-B04181-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | ||
| SI5338B-B00418-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| R404188000 | Radiall | RF Coax Termination RoHS : Compliant | 0 | |||
| R120418500 | Radiall | RF Coax Brd Mt Conn RoHS : Compliant | 0 | |||
| R120418510 | Radiall | Conn Coaxial 0Hz to 2GHz 50Ohm Solder ST Thru-Hole RoHS : Compliant | 0 | |||
| 1000418 | Kyocera AVX Components | Antenna Embedded 4.6dBi Gain 2485MHz/5825MHz/7125M RoHS : Compliant | 0 | |||
| SI5335B-B04180-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5335D-B04185-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| ASPI-0418S-330M-T3 | Abracon Corporation | Inductor Power Shielded Wirewound 33uH 20% 100KHz RoHS : Compliant | 0 | |||
| SI5335B-B04180-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| J05560418-000 | TE Connectivity | Core .187OD X 12.00LG M3 X 0.5 RoHS : Compliant |
| 0 | ||
| 02560418-000 | TE Connectivity | Hermetically Sealed LVDT Position Sensor RoHS : Compliant |
| 0 | ||
ASPI-0418FS-220M-T3![]() | Abracon Corporation | Inductor Power Shielded Wirewound 22uH 20% 100KHz RoHS : Compliant |
| 0 | ||
| 552EF000418DG | Skyworks Solutions Inc | Oscillator VCXO 718.863MHz/ 905.5MHz ±50ppm (Stabi RoHS : Compliant |
| 0 | ||
| 552EF000418DGR | Skyworks Solutions Inc | Oscillator VCXO 718.863MHz/ 905.5MHz ±50ppm (Stabi RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | 504186-2004 | Molex | INSTOCK RoHS : Compliant | 79,170 | ||
| 504186-2002 | Molex | INSTOCK RoHS : Compliant | 77,350 | |||
| 104188-0110 | Molex | INSTOCK | 43,713 | |||
| 504187-3670 | Molex | INSTOCK | 42,770 | |||
| 504187-2070 | Molex | INSTOCK | 38,935 | |||
| 504186-2600 | Molex | INSTOCK | 27,014 | |||
| 504189-2071 | Molex | INSTOCK | 18,200 | |||
| 504187-3870 | Molex | INSTOCK | 15,470 | |||
| F(8240-4182) | INSTOCK | 12,087 | ||||
| DTHD04-1-8P | TE Connectivity | INSTOCK RoHS : Compliant | 6,435 | |||
| 73404-1820 | Molex | INSTOCK | 3,403 | |||
| 6-104186-1 | TE Connectivity | INSTOCK RoHS : Compliant | 3,380 | |||
| 1840418 | Phoenix Contact | INSTOCK RoHS : Compliant | 671 | |||
| 121-0418-002 | Molex | INSTOCK | 14 | |||
| 5905-00-418-3152 | INSTOCK | 3 | ||||
![]() Avnet Abacus | 430450418 | Molex | Conn Power Header 4 POS 3mm Solder ST Surface Mount 4 Terminal 2 Port TR - Tape and Reel (Alt: 430450418) RoHS : Compliant | 62,200 | ||
| L17D204182TX | Amphenol Corporation | D Sub Jack Screw 17D 129 mm M5 440 (Alt: L17D204182TX) RoHS : Compliant | 6,510 | |||
| 436500418 | Molex | Conn Shrouded Header 4 POS 3mm Solder ST Through Hole (Alt: 436500418) RoHS : Compliant | 360 | |||
| 1840418 | Phoenix Contact | Pluggable Terminal Block 35 mm 7 Ways 28 AWG 16 AWG 15 mm Screw (Alt: 1840418) RoHS : Compliant | 50 | |||
| 1041820 | Phoenix Contact | FOCID1PGYSMPAGC FOCID1PGYSMPAGC (Alt: 1041820) RoHS : Compliant | 0 | |||
| 10004-18MS | Vishay Intertechnologies | T18S477M100T4ESZ (Alt: 10004-18MS) RoHS : Compliant | 0 | |||
| D20418123 | ITT Interconnect Solutions | KIT (Alt: 020418-0123) RoHS : Compliant | 0 | |||
| M80-4181298 | Harwin | Conn Housing Datamate Receptacle 12 POS 2mm ST Cable Mount BulkLoose (Alt: M80-4181298) RoHS : Compliant | 0 | |||
| 041809-000 | TE Connectivity | (Alt: 041809-000) RoHS : Not Compliant | 0 | |||
| M80-4183098 | Harwin | Conn Datamate Housing Receptacle 30 POS 2mm ST Cable Mount BulkLoose (Alt: M80-4183098) RoHS : Compliant | 0 | |||
| ATV04-18PA-BUS | Amphenol Corporation | Connector Accessory Buss Amphenol ATV Series Automotive Housing Connectors ATV Series (Alt: ATV04-18PA-BUS) RoHS : Compliant | 0 | |||
| 29F0418-1SR-10 | Qnity Laird | Ferrite Bead 2417 119 Ohm 6 A 10 Milliohm - Tape and Reel (Alt: 29F0418-1SR-10) RoHS : Compliant | 0 | |||
| AHDP04-18-06PN-SRA | Amphenol Corporation | (Alt: AHDP04-18-06PN-SRA) RoHS : Compliant | 0 | |||
| AHDP04-18-08PN-WTA | Amphenol Corporation | Size 18 Receptacle with 8 positions pin standard arrangement normal seal wide thread adapter (Alt: AHDP04-18-08PN-WTA) RoHS : Compliant | 0 | |||
| AHDP04-18-14PR-BRA | Amphenol Corporation | (Alt: AHDP04-18-14PR-BRA) RoHS : Compliant | 0 | |||
![]() Avnet Asia | X1A000171000418 | Epson Electronics America Inc | (Alt: X1A000171000418) RoHS : Compliant |
| 25,000 | |
| 29F0418-1SR-10 | Qnity Laird | Ferrite Bead, 2417, 119 Ohm, 6 A, 10 Milliohm (Alt: 29F0418-1SR-10) RoHS : Compliant | 0 | |||
| D20418-52 | ITT Interconnect Solutions | Connector Accessories Locking Hardware Brass Gold Over Copper (Alt: D20418-52) RoHS : Compliant | 0 | |||
| 10144517-041802LF | Amphenol Corporation | Conn Stacking Receptacle 40 POS 0.8mm Solder ST SMD T/R (Alt: 10144517-041802LF) RoHS : Compliant | 0 | |||
| PA-1041-81H1 | Lite-On Semiconductor Corporation | ADP 40W/12V PHOENIX 2PIN (Alt: PA-1041-81H1) RoHS : Compliant | 0 | |||
| 5004183 | Kyocera AVX Components | ANT 5G PCB+CABLE KS 71MM/OD:1.13 GRAY (Alt: 5004183) RoHS : Compliant | 0 | |||
ASPI-0504-180K-T![]() | Abracon Corporation | Ind Power Unshielded 18uH 10% 2.52MHz 1.23A T/R (Alt: ASPI-0504-180K-T) RoHS : Compliant | 0 | |||
| L17D204182TX | Amphenol Corporation | (Alt: L17D204182TX) RoHS : Compliant | 0 | |||
| AHDP04-18-14PN-WTA | Amphenol Corporation | (Alt: AHDP04-18-14PN-WTA) RoHS : Compliant | 0 | |||
| 5004187 | Kyocera AVX Components | ANT 5G PCB+CABLE KS 71MM/OD:1.13 WHITE (Alt: 5004187) RoHS : Compliant | 0 | |||
| SMAF-C113-AMCF004-18-01 | Amphenol Corporation | (Alt: SMAF-C113-AMCF004-18-01) RoHS : Compliant | 0 | |||
| DDR504186002JD | Amphenol Corporation | Conn DIMM DDR5 Socket Receptacle 288 POS 0.85mm Solder ST SMD Tray (Alt: DDR504186002JD) RoHS : Compliant | 0 | |||
| DDR504186002JD | Amphenol Corporation | Conn DIMM DDR5 Socket Receptacle 288 POS 0.85mm Solder ST SMD Tray (Alt: DDR504186002JD) RoHS : Compliant | 0 | |||
ASPI-0418FS-2R2M-T3![]() | Abracon Corporation | Power Inductor (SMD), 2.2 ?H, 2.2 A, Shielded, 3 A, ASPI-0418FS Series (Alt: ASPI-0418FS-2R2M-T3) RoHS : Compliant |
| 0 | ||
ASPI-0418FS-1R0N-T3![]() | Abracon Corporation | Power Inductor (SMD), 1 uH, ? 30%, 3.2 A, Shielded, 4 A, 1616 [4040 Metric] (Alt: ASPI-0418FS-1R0N-T3) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | PSMN041-80YLX![]() | Nexperia | (Alt: PSMN041-80YLX) RoHS : Compliant | 4,500 | ||
MIC5504-1.8YM5-TR![]() | Microchip Technology Inc | LDO Voltage Regulator Fixed 25 to 55V in 160 mV Drop 18V 03A Out SOT235 40 to 125C (Alt: MIC5504-1.8YM5-TR) RoHS : Compliant | 3,000 | |||
| MIC5504-1.8YMT-TR | Microchip Technology Inc | LDO Regulator Pos 18V 03A 4Pin DFN TR (Alt: MIC5504-1.8YMT-TR) RoHS : Compliant | 0 | |||
MIC5504-1.8YMT-TZ![]() | Microchip Technology Inc | (Alt: MIC5504-1.8YMT-TZ) RoHS : Compliant | 0 | |||
| MIC5504-1.8YMT-T5 | Microchip Technology Inc | LDO Regulator Pos 18V 300mA 4Pin DFN TR (Alt: MIC5504-1.8YMT-T5) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AIUR-04-183G | Abracon Corporation |
| 0 | ||
ASPI-0418FS-101M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-470M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-100M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-182J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-680M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0504-181K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-0504-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-221M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-3R3M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-6R8M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-151M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0418FS-4R7M-T3![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0504-180K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-181J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | 1004-188-SS-26 | RAF Electronic Hardware |
| 21 | ||
| 1004-188-SS | RAF Electronic Hardware |
| 6 | |||
| PRG510-418 | Pop Rivets | PISTON ROD |
| 3 | ||
| HV904180A | Essentra Components | HOOK V-90 STYLESPRING STEEL | 0 | |||
| 12SWS0418B | Essentra Components | SHOULDER WASHER, .115 ID, .312 | 0 | |||
| E3-104-181 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 1004-188-SS-20 | RAF Electronic Hardware | 0 | ||||
| E3-104-1859 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 30418-N | RAF Electronic Hardware | Circuit Board Supports No Plate | 0 | |||
| 20041830 | Essentra Components | 0 | ||||
| R4-10-41-805-10 | Southco | R4-10-41-805-10 | 0 | |||
| R4-10-41-801-10 | Southco | R4-10-41-801-10 | 0 | |||
| 12SWS0418 | Essentra Components | SHOULDER WASHER, .115 ID, .312 | 0 | |||
| 0418-SS | RAF Electronic Hardware | 0 | ||||
| 07001-00418 | Avdel | GEN TL-SKT CAP HD SCREW M4X5 | 0 | |||
![]() EBV Elektronik | BZW04-188-E3/73 | Vishay Intertechnologies | Diode TVS Single UniDir 188V 400W 2Pin DO204AL Tape and Ammo (Alt: BZW04-188-E3/73) RoHS : Compliant | 0 | ||
| BZW04-188B-E3/73 | Vishay Intertechnologies | Diode TVS Single BiDir 188V 400W 2Pin DO204AL Tape and Ammo (Alt: BZW04-188B-E3/73) RoHS : Compliant | 0 | |||
MIC5504-1.8YM5-TR![]() | Microchip Technology Inc | LDO Voltage Regulator Fixed 25 to 55V in 160 mV Drop 18V 03A Out SOT235 40 to 125C (Alt: MIC5504-1.8YM5-TR) RoHS : Compliant | 0 | |||
| MIC5504-1.8YMT-TR | Microchip Technology Inc | LDO Regulator Pos 18V 03A 4Pin DFN TR (Alt: MIC5504-1.8YMT-TR) RoHS : Compliant | 0 | |||
MIC5504-1.8YMT-TZ![]() | Microchip Technology Inc | (Alt: MIC5504-1.8YMT-TZ) RoHS : Compliant | 0 | |||
![]() ECCO | 067402-0418 | ITT Interconnect Solutions |
| 6 | ||
![]() Master Electronics | 9104183500 | Weidmüller Interface GmbH & Co. KG | Circuit Breaker Thermal Magnetic 1Pole 0.2A 250VAC RoHS : Compliant |
| 4 | |
| CB-US04-18A-E | Seiko Instruments Inc | Cable Assembly Cord Set 1.75m 2 POS Power to 2 POS Power M-F RoHS : Compliant |
| 0 | ||
| HTSW-104-18-L-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-104-184 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-104-187 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-104-182 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-14-D-04.18-01-N-RN1 | Samtec Inc | Cable Assembly Flat 0.106m 30AWG 28 POS IDC Connector to 28 POS IDC Connector SKT-SKT IDT-IDT RoHS : Compliant |
| 0 | ||
| PMSD-04-18-K-10.00-S | Samtec Inc | .165 Power Mate® Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-03.50-S | Samtec Inc | .165 Power Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-04.00-D-LUS | Samtec Inc | .165 Power Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-08.00-S | Samtec Inc | .165 Power Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-20.00-D-LUS | Samtec Inc | .165 Power Mate® Single Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| PMSS-04-18-K-95.00-D-LUS | Samtec Inc | Cable Assembly Discrete Wire 2.413m 18AWG 4 POS Discrete Wire Housing to 4 POS Discrete Wire Housing RCP-RCP RoHS : Compliant |
| 0 | ||
| PMSS-04-18C-K-15.03-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| D20418123 | ITT Interconnect Solutions | D Sub 030-2529-000 RoHS : Compliant |
| 0 | ||
![]() Neutron USA | ATV04-18PA-BUS | Amphenol Corporation | Connectors 18 Way Buss Rcpt Key A RoHS : Compliant |
| 50 | |
| 1840418 | Phoenix Contact | PCB Connector, Female, Screw 3.5mm 16AWG 160V 8A, 1row 7 Pos, MC 1,5/ 7-ST-3,5 RoHS : Compliant |
| 50 | ||
| 0804183:0011 | Phoenix Contact | Marker card for terminal blocks 5mm W, White, horiz 11-20, Vert 12 identical decades, SK 5/3,8:FORTL.ZAHLEN 11-20, Price per card RoHS : Compliant |
| 50 | ||
| 0804183:0001 | Phoenix Contact | MARKER CARD for terminal blocks, white, horizon 1-10, Vertic: 12 identical decades, SK 5/3,8:FORTL.ZAHLEN 1-10, Price per card RoHS : Compliant |
| 50 | ||
| 30418-25 | Littelfuse Inc | Circuit Breakers ATM_BRKR TYPE 1, 25A |
| 50 | ||
| 410-418 | Digilent Inc | Audio Modules Analog Discovery Audio Adapter+ Product Kit |
| 50 | ||
| 5604187 | Phoenix Contact | Mounting Hardware 1 meter DIN Rail perforated |
| 50 | ||
| 03500418Z | Littelfuse Inc | Fuse Holder Bottom Mount Block RoHS : Compliant |
| 50 | ||
| 204180-01 | Plantronics Inc | EXPLORER 500 USB CHARGE STRAP |
| 2 | ||
DSTL-0418-12![]() | Delta Electronics Inc | Solenoid, Tubular, Continuous, Duty Cycle 100%, 1/8" Stroke, 12VDC, 1.4W, 110ohm, Wire Leads with Connector RoHS : Compliant |
| 0 | ||
| 004181215 | Altech Corporation | Specialty Fuses Fuse,NH00C,gG,M,125A,500VAC |
| 0 | ||
| 004185218 | Altech Corporation | Specialty Fuses Fuse,NH2C,gG,M,224A,500VAC |
| 0 | ||
| 004182216 | Altech Corporation | Specialty Fuses Fuse,NH00,gG,M,160A,500VAC |
| 0 | ||
| PR100418 | Kunbus GmbH | Industrial Box PCs RevPi Connect 5 32 GB 8 GB RS485 CAN FD |
| 0 | ||
| CX3404-1862 | SOCKET | SOCKETSCAN S730, 1D LASER BARCODE |
| 0 | ||
![]() Pasternack Enterprises US | PE3W06104-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Clamped SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly clamped SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Clamped SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W06104-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W06104-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06104-18 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this clamped SMA male right angle to SMA male cable 18 inch length using PE-SR402FLJ coax. |
| 157 | |
| PE3C7804-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMP Female to Straight Cut Lead Cable 18 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female to straight cut lead cable 18 inch length using PE-047SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female to straight cut lead cable 18 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMP to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMP cable connection on one end and a straight cut lead cable connection on the other. Our SMP to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C7804-18 can also be known as a SMP jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. SMP jack to straight cut lead sexless cable assembly PE3C7804-18 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to straight cut lead cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7804-18 can also be used in the other direction and will be a straight cut lead sexless to SMP female cable assembly if the opposite connectivity is required. SMP jack to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMP to straight cut lead cable assembly for quick shipment worldwide. Variations of SMP and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP to Straight Cut Lead RF cable assembly as per your requirements. |
| 140 | ||
| PE3W02604-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female to Limited Detent SMP Male 2 Hole Flange Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA female to limited detent SMP male 2 hole flange cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to limited detent SMP male 2 hole flange cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMP 2 hole flange cable connection on the other. Our SMA to SMP cable assembly has female gender on end 1 and male on end 2. PE3W02604-18 can also be known as a SMA jack to SMP plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to SMP plug cable assembly PE3W02604-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold over nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W02604-18 RF cable are available on our downloadable PDF datasheet.PE3W02604-18 can also be used in the other direction and will be SMP male 2 hole flange to SMA female cable assembly if the opposite connectivity is required. SMA jack to SMP plug 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 9 | ||
| PE3M0418-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-P047, RF Cable Type: Coax, RF Cable Specification: PE-P047 datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 Contact Socket to SMPS Size 16 Contact Socket Cable 60 Inch Length Using PE-P047 Coax with HeatShrink, LF Solder. The PE3M0418-60 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS socket contact connection on one end and a SMPS socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMPS cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 50 GHz. The PE3M0418-60 RF cable has a FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our SMPS socket to SMPS socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The PE3M0418-60 in-series RF cable has 90 dB of minimum RF shielding. SMPS socket to SMPS socket cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack PE3M0418-60 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMPS RF cable are available on our downloadable PDF datasheet. SMPS socket to SMPS socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements. |
| 6 | ||
| PE3W04181 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Push-On 4.3-10 Male to SMA Male Cable Using PE-SR402FLJ Coax. PE3W04181 is a 4.3-10 male to SMA male cable using PE-SR402FLJ coax. This Pasternack 4.3-10 male to SMA male cable assembly uses a 50 Ohm 4.3-10 for connector 1 and a 50 Ohm SMA for connector 2. Our male 4.3-10 to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W04181 4.3-10 male to SMA male cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3C5504-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Trimmed Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. Smooth Bore SMP Male Bulkhead to Trimmed Lead Cable 18 Inch Length Using Tinned RG405 Coax., Radio frequency assembly smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Smooth bore SMP male bulkhead to trimmed lead cable 18 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to trimmed lead cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and trimmed lead cable connection on the other. Our SMP to trimmed lead cable assembly has male gender on end 1 and sexless on end 2. PE3C5504-18 can also be known as a SMP plug to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMP plug to trimmed lead sexless cable assembly PE3C5504-18 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has crimp/solder attachment method and body with plating.Additional dimensions, specifications and CAD drawings for this PE3C5504-18 RF cable are available on our downloadable PDF datasheet.PE3C5504-18 can also be used in the other direction and will be trimmed lead sexless to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to trimmed lead cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMP RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04186/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MMCX Plug to SMA Female Bulkhead Cable Using LMR-100 Coax with HeatShrink. PE3W04186/HS is a MMCX plug to SMA female bulkhead cable using LMR-100A coax. This Pasternack MMCX plug to SMA female bulkhead cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. Our plug MMCX to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04186/HS MMCX plug to SMA female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04188 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Female to Reverse Polarity TNC Male Cable Using LMR-100 Coax. PE3W04188 is a N female to reverse polarity TNC male cable using LMR-100A coax. This Pasternack N female to reverse polarity TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to reverse polarity male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04188 N female to TNC reverse polarity male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04183/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Plug to N Female 4 Hole Flange Low Loss Cable Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug to N female 4 hole flange low loss cable using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA plug to N female 4 hole flange low loss cable using LMR-195 coax with heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and type N 4 hole flange cable connection on the other. Our low loss reverse polarity SMA to N type cable assemblies have a plug gender on end 1 and female on end 2. PE3W04183/HS can also be known as a low loss reverse polarity SMA male to N type jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA male to type N jack cable assembly PE3W04183/HS is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency reverse polarity SMA plug to N type female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04183/HS can also be used in the other direction and will be type N female 4 hole flange to reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity male to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA plug to N female 4 hole flange low loss cable using LMR-195 coax with heatshrink. | 0 | |||
| PE3C10418-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 60 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 60 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-60 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04182-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. MCX Plug Right Angle to TNC Female Bulkhead Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly MCX plug right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle MCX cable connection on one end and TNC bulkhead cable connection on the other. Our low loss right angle MCX to TNC cable assemblies have a plug gender on end 1 and female on end 2. PE3W04182-100CM can also be known as a low loss right angle MCX male to TNC jack cable assembly and will be shipped same-day as it is purchased. MCX male to TNC jack cable assembly PE3W04182-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 1 GHz maximum frequency MCX right angle plug to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04182-100CM can also be used in the other direction and will be TNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. Low loss MCX right angle male to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to TNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug right angle to TNC female bulkhead low loss cable 100 cm length using LMR-100 coax. |
| 0 | ||
| PE3C0418 | Pasternack Enterprises | 0 | ||||
| PE3C0418LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm. 75 Ohm F Male to 75 Ohm F Male Cable Using 93 Ohm RG62 Coax with HeatShrink, LF Solder. PE3C0418LF/HS is a F male to F male cable using RG62 coax. This Pasternack F male to F male cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm F for connector 2. Our male F to male F cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3C0418LF/HS F male to F male cable assembly is constructed with RG62 coax. | 0 | |||
| PE3C10418-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 24 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 24 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-24 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-24 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10418-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400-FR, RF Cable Type: TCOM-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated TNC Male to TNC Male Low Loss Cable 12 Inch Length Using TCOM-400-FR Coax With Times Microwave Components., Radio frequency assembly fire rated TNC male to TNC male low loss cable 12 inch length using TCOM-400-FR coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated TNC male to TNC male low loss cable 12 inch length using TCOM-400-FR coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss a TNC to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10418-12 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10418-12 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. TNC plug to TNC plug cable assembly PE3C10418-12 is built with TCOM-400-FR which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. |
| 0 | ||
![]() TE Connectivity | 640418-2 | TE Connectivity | BLADE REC 250 18-14AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 640418-2 | Internal Number: 640418-2 | TE Connectivity RoHS : Compliant |
| 48,581 | |
| 640418-1 | TE Connectivity | BLADE REC 250 18-14AWG BR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 18 – 14 AWG Wire Size: .82 – 2.08 mm² Mating Tab Width: 6.35 mm Receptacle Uninsulated 18 – 14 AWG .82 – 2.08 mm² | Quick Disconnect | Part Number: 640418-1 | Internal Number: 640418-1 | TE Connectivity RoHS : Compliant |
| 15,381 | ||
| 350418-1 | TE Connectivity | .093 COMM P&S PIN 18-24 PTPBR Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 24 – 18 AWG Operating Voltage: 600 VAC 250 VAC Tin (Sn) Pin Pre-Tin 24 – 18 AWG | Connector Contact | Part Number: 350418-1 | Internal Number: 350418-1 | TE Connectivity RoHS : Compliant |
| 11,804 | ||
| 1740418-1 | TE Connectivity | MAG-MATE PIN CONTACT Magnet Wire Terminal Type: Pin Magnet Wire Size: 26 – 23 AWG Magnet Wire Size: .4 – .57 mm Termination Method to Wire & Cable: Insulation Displacement (IDC) Mating Pin Diameter: 3.18 mm Pin 26 – 23 AWG .4 – .57 mm Insulation Displacement (IDC) | Magnet Wire Terminal | Part Number: 1740418-1 | Internal Number: 1740418-1 | 3.18 mm | TE Connectivity RoHS : Compliant |
| 5,976 | ||
| 1-1586041-8 | TE Connectivity | 18P VAL-U-LOK R/A HDR V2 PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Wire-to-Board Number of Positions: 18 Number of Rows: 2 PCB Mount Header Right Angle Wire-to-Board 18 | PCB Header & Receptacle | Part Number: 1-1586041-8 | Internal Number: 1-1586041-8 | TE Connectivity RoHS : Compliant |
| 3,898 | ||
| DTHD04-1-8P-E003 | TE Connectivity | REC, 1P, BLK, N, SIZE 8, CAP Nominal Voltage Architecture: 12 V 48 V 24 V Number of Positions: 1 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 3.61 mm Deutsch Dthd Housing | 12 V | Part Number: DTHD04-1-8P-E003 | Internal Number: DTHD04-1-8P-E003 | Alias Number: ZPF000000000130114 | 3.61 mm | TE Connectivity RoHS : Compliant |
| 968 | ||
| 284041-8 | TE Connectivity | TERMINAL BLOK VERTICAL PLUG ST Number of Positions: 8 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .2 in Centerline (Pitch): 5.08 mm PCB Terminal Block | 8 Plug Wire-to-Board .2" | Part Number: 284041-8 | Internal Number: 284041-8 | .2" | TE Connectivity RoHS : Compliant |
| 120 | ||
| DTCE04-1-8P-E003 | TE Connectivity | DTCE RECP ASM Nominal Voltage Architecture: 12 V 24 V 48 V Number of Positions: 1 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 3.61 mm Automotive Housing | 12 V | Part Number: DTCE04-1-8P-E003 | Internal Number: DTCE04-1-8P-E003 | Alias Number: ZPF000000000130104 | 3.61 mm | TE Connectivity RoHS : Compliant |
| 3 | ||
| 5-104186-1 | TE Connectivity | 04 SYS 50 HDR SRRA UNSHRD TIN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Right Angle Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Number of Positions: 4 PCB Mount Header Right Angle Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 5-104186-1 | Internal Number: 5-104186-1 | TE Connectivity RoHS : Compliant |
| 3 | ||
![]() Venkel Ltd. | CRN10-4-180JT | VENKEL LTD | Chip Resistor Array;CRN10;4;18R;�5%;Convex RoHS : Compliant | 30,000 | ||
| CRN10-4-181JT | VENKEL LTD | Chip Resistor Array;CRN10;4;180R;�5%;Convex RoHS : Compliant | 10,000 | |||
![]() Vyrian | HMCAD1041-80 | Analog Devices Inc | ADC, Proprietary Method, 10-Bit, 1 Func, 1 Channel, Parallel, Word Access, PQCC40 RoHS : Compliant | 11,711 | ||
| 3041833 | Phoenix Contact | Barrier Strip Terminal Block, 24A, 4mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 10,082 | |||
| PSMN041-80YL | Nexperia | Power Field-Effect Transistor, 25A I(D), 80V, 0.041ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MO-235 RoHS : Compliant | 9,443 | |||
| 10004-18KS | Vishay Intertechnologies | Tantalum Capacitor, Polarized, Tantalum (wet), 100V, 10% +Tol, 10% -Tol, 470uF, Through Hole Mount RoHS : Not Compliant | 8,855 | |||
| 7448041801 | Wurth Elektronik | Single Phase EMI Filter, 250V, 50HzHz | 8,424 | |||
| 1041880210 | Molex | Barrier Strip Terminal Block, 9A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 8,421 | |||
| MAX20418ATGB-V-T | Analog Devices (Maxim Integrated) | 7,972 | ||||
| 2304185-4 | TE Connectivity | Board Connector, 1 Row(s), Male, Straight, Solder Terminal RoHS : Compliant | 7,971 | |||
| D20418-2 | ITT Interconnect Solutions | Connector Accessory, Screwlock, Steel RoHS : Not Compliant | 7,907 | |||
| PTLV70418DBVR | Texas Instruments | Fixed Positive LDO Regulator, 1.8V, 1.1V Dropout, PDSO5 RoHS : Not Compliant | 7,802 | |||
SDC1740418B![]() | Analog Devices Inc | Synchro or Resolver to Digital Converter, Hybrid, MDIP32 RoHS : Not Compliant | 7,560 | |||
| DTHD04-1-8P | TE Connectivity | Circular Connector, Male, Receptacle RoHS : Compliant | 5,767 | |||
DSTL-0418-12![]() | Delta Electronics Inc | Solenoids RoHS : Compliant | 4,339 | |||
| 61000418321 | Wurth Elektronik | Terminal and Terminal Block | 755 | |||
| 0804183:0011 | Phoenix Contact | Terminal Block Accessory, Marking Item RoHS : Compliant | 503 | |||
![]() Waytek, Inc. | AL-04-18-0-M | Advanced Cable Ties Inc | ACT AL-04-18-0-M miniature cable tie is a black nylon 6/6 tie with 18 lb. tensile strength, a one-piece self-locking design, and reliable performance from -40F to 185F. Packaged in bags of 1,000, it is built to bundle wire, cable, hoses, and tubing in general-purpose applications. RoHS : Compliant |
| 448,000 | |
| AL-04-18-9-M | Advanced Cable Ties Inc | ACT AL-04-18-9-M miniature cable tie is a natural 4" nylon 6/6 tie with 18 lb. tensile strength and a .87" maximum bundle diameter. Rated from -40F to 185F and packaged in bags of 1,000, it is designed to bundle wire, cable, hoses, and tubing. RoHS : Compliant |
| 296,000 | ||
| AL-04-18-0-C | Advanced Cable Ties Inc | ACT AL-04-18-0-C miniature cable tie is a black nylon 6/6 tie with 18 lb. tensile strength, a one-piece self-locking design, and reliable performance from -40F to 185F. Packaged in bags of 100, it is built to bundle wire, cable, hoses, and tubing in general-purpose applications. |
| 203,100 | ||
| AL-04-18-9-C | Advanced Cable Ties Inc | ACT AL-04-18-9-C miniature cable tie is a natural 4" nylon 6/6 tie with 18 lb. tensile strength and a .87" maximum bundle diameter. Rated from -40F to 185F and packaged in bags of 100, it is designed to bundle wire, cable, hoses, and tubing. |
| 17,500 | ||
| 19221-0418 | Molex | 2GA Tinned Eyelet 1/4" Stud RoHS : Compliant |
| 2,502 | ||
| ATHD04-1-8P | Amphenol Sine Systems | Amphenol Sine Systems ATHD04-1-8P ATHD receptacle is a 1-position, size 8 power connector. This sealed thermoplastic housing uses ATHD contacts, supports field-installable heavy-duty power connections, and operates from -67F (-55C) to 257F (125C). |
| 737 | ||
| AHDP04-18-06SN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-06SN-SRA DuraMate AHDP receptacle is a shell size 18, 6-position socket circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 574 | ||
| AHDP04-18-06SN-SRAC0 | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-06SN-SRAC030 DuraMate AHDP receptacle is a shell size 18, 6-position socket circular connector with normal diameter seal and smooth ring adapter C030 variant. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 549 | ||
| AHDP04-18-14SN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-14SN-SRA DuraMate AHDP receptacle is a shell size 18, 14-position socket circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 384 | ||
| AHDP04-18-08SN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-08SN-SRA DuraMate AHDP receptacle is a shell size 18, 8-position socket circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 163 | ||
| AHDP04-18-21SN-SRA | Amphenol Sine Systems | Amphenol Sine Systems AHDP04-18-21SN-SRA DuraMate AHDP receptacle is a shell size 18, 21-position socket circular connector with normal diameter seal and smooth ring adapter. Its black thermoplastic housing uses bayonet coupling with IP68/IP69K mated protection and -55C to +125C operation. |
| 130 | ||
| ATV04-18PA-BUS | Amphenol Sine Systems | Amphenol Sine Systems ATV04-18PA-BUS ATV Series connector receptacle is an 18-way, Key A busbar receptacle. The compact sealed thermoplastic housing uses built-in contact sealing, an interfacial seal, and a 13A current rating for harsh-environment circuits. |
| 113 | ||
| AT04-18PABM14-X2-TS0 | Amphenol Sine Systems | 36 POS Power Splitter Control Module, 1 Threaded Stud & 12 Pin x 2 Device Layout, 225A |
| 51 | ||
![]() Win Source Electronics | MIC5504-1.8YM5-TR![]() | Microchip Technology Inc | IC REG LDO 1.8V 0.3A 5SOT23 RoHS : Compliant |
| 597,200 | |
MIC5504-1.8YM5-T5![]() | Microchip Technology Inc | IC REG LINEAR 1.8V 300MA SOT23-5 RoHS : Compliant |
| 592,400 | ||
| 104188-0110 | Molex | LITE-TRAP SMT WIRE-TO-BOARD CONN |
| 50,000 | ||
| 1041880110 | Molex | CONN SSL RECEPTACLE 1POS SOLDER RoHS : Compliant |
| 50,000 | ||
| 1041880210 | Molex | CONN SSL RCPT 2POS 4MM SOLDER RoHS : Compliant |
| 1,811 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |