 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0366 nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 Master Electronics | AA0366-P373AB | C&K Switches | SW ASSY-TRANS O/D LOCKOUT RoHS : Compliant |
| 0 | |
| 7100366532 | 3M Interconnect | RoHS : Compliant |
| 0 | ||
| CA1-B0-36-650-321-C | Carling Technologies | CA1B036650321C RoHS : Compliant |
| 0 | ||
| CA1-B0-36-680-331-C | Carling Technologies | CA1B036680331C RoHS : Compliant |
| 0 | ||
| AA1-B0-36-630-5D1-C | Carling Technologies | AA1B0366305D1C RoHS : Compliant |
| 0 | ||
| SFSD-05-28-G-03.66-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| DD1-B0-36-620-131-D | Carling Technologies | DD1B036620131D RoHS : Compliant |
| 0 | ||
| DA1-B0-36-630-131-D | Carling Technologies | DA1B036630131D RoHS : Compliant |
| 0 | ||
| CA1-B0-36-690-321-L | Carling Technologies | CA1B036690321L RoHS : Compliant |
| 0 | ||
| CA2-B0-36-625-121-C | Carling Technologies | CA2B036625121C RoHS : Compliant |
| 0 | ||
| CA3-B0-36-670-31A-C | Carling Technologies | CA3B03667031AC RoHS : Compliant |
| 0 | ||
| BA1-B0-36-610-221-D | Carling Technologies | BA1B036610221D RoHS : Compliant |
| 0 | ||
| BA1-B0-36-630-121-C | Carling Technologies | Single-pole hydraulic-magnetic circuit breaker with handle actuator 30A current rating DC/50-60Hz long time delay and UL/CSA agency approvals. RoHS : Compliant |
| 0 | ||
| AD1-B0-36-640-533-I | Carling Technologies | AD1B036640533I RoHS : Compliant |
| 0 | ||
| FFSD-10-D-03.66-01-N-RW-R | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Verical | 0366640001 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ T/R RoHS : Compliant |
| 41,396 | |
| 0366630002 | Molex | Contact PIN Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 12,750 | ||
| 0366640002 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 7,424 | ||
| 0366-0-15-80-13-80-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Exempt |
| 5,000 | ||
| 036610-000 | TE Connectivity | Cable Markers Pre-Marked Snap On Polyoxymethylene Yellow Strip RoHS : Compliant |
| 1,200 | ||
| 0366420001 | Molex | Conn Wire to Board HDR 6 POS 3.96mm Solder ST Top Entry Thru-Hole KK Bag RoHS : Compliant |
| 699 | ||
| 0366380002 | Molex | Conn Rectangular PIN 48 POS Solder RA Thru-Hole Tray RoHS : Compliant |
| 676 | ||
| 0366-0-15-01-13-14-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Not Compliant |
| 500 | ||
| 0366860000 | Weidmüller Interface GmbH & Co. KG | 0366860000 |
| 400 | ||
| 0366640002 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 192 | ||
| 036-6050-000 | ITT Interconnect Solutions | 036-6050-000 |
| 28 | ||
| 0366-0-15-01-23-01-10-0 | Mill-Max Mfg Corp | Contact SKT 23 Size Press Fit ST Thru-Hole RoHS : Not Compliant |
| 26 | ||
| 0366380002 | Molex | Conn Rectangular PIN 48 POS Solder RA Thru-Hole Tray RoHS : Compliant |
| 4 | ||
| 03660350-017 | ITT Interconnect Solutions | 03660350-017 |
| 3 | ||
| 036-6024-003 | ITT Interconnect Solutions | 036-6024-003 |
| 3 | ||
 Avnet Americas | CRCW0603665KFKEA | Vishay Intertechnologies | SMD Chip Resistor, 665 kohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW0603665KFKEA) RoHS : Compliant |
| 15,000 | |
| 5-103669-3 | TE Connectivity | - Rail/Tube (Alt: 5-103669-3) RoHS : Compliant |
| 11,880 | ||
| 5-103669-1 | TE Connectivity | - Rail/Tube (Alt: 5-103669-1) RoHS : Compliant |
| 8,771 | ||
| 5-103669-5 | TE Connectivity | - Rail/Tube (Alt: 5-103669-5) RoHS : Compliant |
| 8,580 | ||
| 7-520366-2 | TE Connectivity | - Bag (Alt: 7-520366-2) RoHS : Compliant |
| 5,348 | ||
| 5-103669-2 | TE Connectivity | - Rail/Tube (Alt: 5-103669-2) RoHS : Compliant |
| 4,442 | ||
| 5-103669-4 | TE Connectivity | - Rail/Tube (Alt: 5-103669-4) RoHS : Compliant |
| 1,445 | ||
| 170366-3 | TE Connectivity | Contact SKT Crimp ST Cable Mount Loose Piece - Bag (Alt: 170366-3) RoHS : Compliant |
| 448 | ||
| 103669-1 | TE Connectivity | - Rail/Tube (Alt: 103669-1) RoHS : Not Compliant |
| 360 | ||
| M39003/03-0366 | KEMET Corporation | Tantalum Capacitor, 10 uF, 35 V, ? 10%, Axial Leaded, 2 ohm, 224 mA, R, 4.7 mm, 12.04 mm - Bulk (Alt: M39003/03-0366) RoHS : Not Compliant |
| 3 | ||
| 4435.0366 | Schurter Electronic Components | - Boxed Product (Development Kits) (Alt: 4435.0366) RoHS : Compliant |
| 1 | ||
| 63903-6670 | Molex | TOOL KIT - Bulk (Alt: 0639036670) RoHS : Compliant |
| 0 | ||
| 7010366035 | 3M Interconnect | EXL UNITIZED WHEEL, XL-UW, 2S FINE, 6 IN - Bulk (Alt: 7010366035) RoHS : Not Compliant |
| 0 | ||
| 7010366404 | 3M Interconnect | SE SURFACE CONDITIONING BELT, SE-BS, A/O - Bulk (Alt: 7010366404) RoHS : Not Compliant |
| 0 | ||
| 7010366774 | 3M Interconnect | QUICK CHANGE CLEANING PRO DISC, 840499, - Bulk (Alt: 7010366774) RoHS : Not Compliant |
| 0 | ||
 Arrow Electronics | 0366640001 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ T/R RoHS : Compliant |
| 41,396 | |
| 0366630002 | Molex | Contact PIN Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 12,750 | ||
| 0366640002 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 7,424 | ||
| 0366-0-15-80-13-80-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Exempt |
| 5,000 | ||
| 0366-0-15-01-13-14-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Not Compliant |
| 3,093 | ||
| 0366440002 | Molex | Conn Housing RCP 2 POS 6.35mm Crimp ST Cable Mount Natural MLX™ Bag RoHS : Compliant |
| 1,649 | ||
| 0366420001 | Molex | Conn Wire to Board HDR 6 POS 3.96mm Solder ST Top Entry Thru-Hole KK Bag RoHS : Compliant |
| 699 | ||
| 0366380002 | Molex | Conn Rectangular PIN 48 POS Solder RA Thru-Hole Tray RoHS : Compliant |
| 676 | ||
| 0366-0-15-01-13-14-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Not Compliant | 500 | |||
| 0366640002 | Molex | Contact SKT Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 192 | ||
| 0366630002 | Molex | Contact PIN Crimp ST Cable Mount 10-12AWG MLX™ Bag RoHS : Compliant |
| 54 | ||
| 0366-0-15-01-23-01-10-0 | Mill-Max Mfg Corp | Contact SKT 23 Size Press Fit ST Thru-Hole RoHS : Not Compliant |
| 26 | ||
| 0366630001 | Molex | Contact PIN Crimp ST Cable Mount 10-12AWG MLX™ Reel RoHS : Compliant |
| 12 | ||
| 0366-0-15-01-13-27-10-0 | Mill-Max Mfg Corp | Contact SKT 13 Size Press Fit ST Thru-Hole Bulk RoHS : Not Compliant |
| 10 | ||
| 0366380002 | Molex | Conn Rectangular PIN 48 POS Solder RA Thru-Hole Tray RoHS : Compliant |
| 4 | ||
 Newark | CRCW060366K5FKEA | Vishay Intertechnologies | Chip Res Smd, 66K5, ±1%, 100Mw; |Vishay CRCW060366K5FKEA RoHS : Compliant |
| 10,000 | |
| MP003667 | SPC Multicomp | Res, 470K, 1%, 0.125W, 0805, Thick Film; |Multicomp Pro MP003667 RoHS : Compliant |
| 4,820 | ||
| MP003667 | SPC Multicomp | Res, 470K, 1%, 0.125W, 0805, Thick Film; |Multicomp Pro MP003667 RoHS : Compliant |
| 4,820 | ||
| CRCW060366K5FKEA | Vishay Intertechnologies | Chip Res Smd, 66K5, ±1%, 100Mw; |Vishay CRCW060366K5FKEA RoHS : Compliant |
| 4,228 | ||
| CRCW060366K5FKEA | Vishay Intertechnologies | Chip Res Smd, 66K5, ±1%, 100Mw; |Vishay CRCW060366K5FKEA RoHS : Compliant |
| 4,228 | ||
| MAX20366CEWZ+T | Analog Devices Inc | Pmic, 3 Ldo, 3 Buck Conv, Wlcsp-72; |Analog Devices, Inc. MAX20366CEWZ+T RoHS : Not Compliant |
| 2,000 | ||
| 2203-6661 | WAGO Innovative Connections | Terminal Block, Din Rail, 5Pos, 12Awg; No. Of Positions:5Positions; Wire Size Awg Min:22Awg; Wire Size Awg Max:12Awg; Conductor Area Csa:2.5Mm²; Wire Connection Method:Push In; Rated Current:22A; Rated Voltage:250V; No. Of Levels:3 Rohs Compliant: Yes RoHS : Compliant |
| 577 | ||
| 970400366 | Wurth Elektronik | Standoff, Hex Female-Female, 40Mm, M3; |Würth Elektronik 970400366 RoHS : Compliant |
| 305 | ||
| 800366-SF | TE Connectivity | Filter, 4A, 2 Fuse, Screw In; |Te Connectivity Schaffner 800366-SF RoHS : Compliant |
| 268 | ||
| 5-103669-7 | TE Connectivity | Wtb Conn, Header, 8Pos, 1Row, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:8Contacts; Contact Termination Type:Through Hole; Product Range:Ampmodu Series; Connector Shroud:Shroudedrohs Compliant: Yes RoHS : Compliant |
| 150 | ||
| 971250366 | Wurth Elektronik | Standoff, Hex Male-Female, 31Mm; |Würth Elektronik 971250366 RoHS : Not Compliant |
| 56 | ||
| 003660158 | Pulse Electronics Corporation | Universal Adapter Set, 2.1Mm X 5.5Mm; |Pulse Electronics 003660158 RoHS : Compliant |
| 16 | ||
| 5-103669-1 | TE Connectivity | Wire-Board Connector Header 2 Position, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:2Contacts; Contact Termination Type:Through Hole Straight; Product Range:Mte Rohs Compliant: Yes RoHS : Compliant |
| 11 | ||
| MP700366 | SPC Multicomp | Tape, Silicone Adhesive, Masking, Amber; Available Until Stocks Are Exhausted |Multicomp Pro MP700366 RoHS : Not Compliant |
| 10 | ||
| 5-103669-5 | TE Connectivity | Connector, Header, 6 Position, 1Row, 2.54Mm; Connector Systems:Wire-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:1Rows; No. Of Contacts:6Contacts; Contact Termination Type:Through Hole Straight; Product Range:Mte Rohs Compliant: Yes RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | MAX20366AEWZ+T | Analog Devices Inc | High End Wearable PMIC RoHS : Compliant |
| 62,400 | |
| MAX20366AEWZ+ | Analog Devices Inc | High End Wearable PMIC RoHS : Compliant | 3,602 | |||
| MAX20366CEWZ+T | Analog Devices Inc | High End Wearable PMIC |
| 400 | ||
| MAX20366BEWZ+T | Analog Devices Inc | High End Wearable PMIC |
| 400 | ||
| MAX20366EVKIT# | Analog Devices Inc | Evkit for PMIC with Ultra-Low RoHS : Compliant | 21 | |||
 RS | 5-103669-7 | TE Connectivity | PCB HOUSING 2.54MM, 8 WAY, 1ROW STRAIGHT, IDC, 3A, AMPMODU MTE SERIES RoHS : Compliant |
| 503 | |
| CA1-B0-36-680-321-L (CA1B036680321L | CA1-B0-36-680-321-L | CA1B036680321L) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIESTRIP DC50/60HZ LONG 80A STUD DUAL LEGEND |
| 77 | ||
| CA1-B0-36-630-121-D (CA1B036630121D | CA1-B0-36-630-121-D | CA1B036630121D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIESTRIP DC50/60HZ LONG 30A STUD DUAL LEGEND |
| 76 | ||
| CA1-B0-36-670-321-D (CA1B036670321D | CA1-B0-36-670-321-D | CA1B036670321D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIESTRIP DC50/60HZ LONG 70A STUD DUAL LEGEND |
| 36 | ||
| 3036615 (DS-ST 4) | Phoenix Contact | TERMINAL BLOCK COVER SEGMENT, LENGTH 87 MM, HEIGHT 36.5 MM, COLOR GRAY |
| 31 | ||
| BA1-B0-36-620-111-D (BA1B036620111D | BA1-B0-36-620-111-D | BA1B036620111D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIES TRIP DC 50/60HZ LONG 20A QC DUAL LEGEND |
| 27 | ||
| 120065-0366 (804000D01M040) | Woodhead Molex | SINGLE-ENDED, 4 POLE, M12 FEMALE TO PIGTAIL, PVC, 4M L, 120065 SERIES |
| 22 | ||
| 2903663 (REL-IR2/LDP-110DC/2X21) | Phoenix Contact | POWER RELAY, DPDT, 110VDC/250VAC, 250VDC, 12A, RIFLINE COMPLETE RELAY SERIES |
| 20 | ||
| BA1-B0-36-630-211-D (BA1B036630211D | BA1-B0-36-630-211-D | BA1B036630211D) | Carling Technologies | CIRCUIT BREAKER HYD/MAG HANDLE 1P SERIES DC 50/60HZ 30A SCREW DUAL LEGEN |
| 14 | ||
| PGT-08-S (1036616) | SICK AG | MINIATURE USB PROGRAMMING UNIT, 10-30VDC, FOR SICK ENCODERS, PGT-10-P SERIES |
| 9 | ||
| 0803666 (UCTU-TM (3 5X7)) | Phoenix Contact | MARKING MATERIAL SPECIALLY FOR PTIO 1.5/SXXX TERMINAL BLOCK RANGE UCT SERIES |
| 9 | ||
| 2903666 (REL-IR2/L- 24AC/2X21) | Phoenix Contact | POWER RELAY, DPDT, 24VAC/250VAC, 250VDC, 12A, RIFLINE COMPLETE RELAY SERIES |
| 8 | ||
| 1SNA290366R1500 (029036615) | TE Connectivity | PC5.34 JUMPER 34 POLES RED, ENTRELEC |
| 4 | ||
| 3240366 (CD-HF 120X80) | Phoenix Contact | CABLE DUCT; LIGHT GRAY; HALOGEN FREE; 120 MM X 80 MM; 2 METERS |
| 2 | ||
| PR100366 | Kunbus GmbH | REVPI CORE SE, 16GB |
| 1 | ||
 Microchip Technology Inc | ELE03664 | Microchip Technology Inc | CAP,4.7UF,50V,Y5V,1206, Projected EOL: 2050-11-22 - Contact for Pricing | 0 | ||
 Bisco Industries | 16000366-3 | North East Fasteners Corporation | 2,600 | |||
| 460-3661-02-03-00 | Cambion Electronics Ltd | 2,500 | ||||
| 0366-0-15-01-13-01-10-0 | Mill-Max Mfg Corp | RoHS : Not Compliant | 1,886 | |||
| 5600-36-62 | Seastrom Mfg | 1,403 | ||||
| 170366-1 | TE Connectivity | RoHS : Compliant | 1,136 | |||
| 4036-632-N | RAF Electronic Hardware | 257 | ||||
| 5710-36-60 | Seastrom Mfg | 164 | ||||
| M63540/3-6-6 | Staffall | 152 | ||||
| 7-520366-2 | TE Connectivity | RoHS : Compliant | 120 | |||
| WJ4036-632-S-12 | W.J. Roberts Co Inc | 59 | ||||
| 4036-632-SS-20 | RAF Electronic Hardware | 45 | ||||
| 10-036675-020 | MISCELLANEOUS | 19 | ||||
| S-4036-632-39 | Globe Electronic Hardware Inc | 17 | ||||
| 10-036675-022 | MISC GASKETS | 9 | ||||
| 0366-0-15-15-13-27-10-0 | Mill-Max Mfg Corp | RoHS : Compliant | 2 | |||
 Onlinecomponents.com | 121577-0366 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 18-11 - Sockets - Bayonet Coupling RoHS : Compliant |
| 0 | |
| 15266-0366 | Molex | 0.50mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 34 Circuits, 0.102m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating RoHS : Compliant |
| 0 | ||
| 15168-0366 | Molex | 1.25mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 30 Circuits, 0.03m Cable Length, Cable Thickness 0.12mm, Tin (Sn) Plating RoHS : Compliant |
| 0 | ||
| 024269-0366 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 16S-1 - Sockets - Threaded Coupling - Endbell w/Clamp & Bushing |
| 0 | ||
| 121141-0366 | ITT Interconnect Solutions | Circular Connector - Straight Plug - Contact Arrangement: 20-29 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing |
| 0 | ||
| WUT-0366 | Thomas & Betts | WARNING, HAZARDOUS VOLTAGE RoHS : Compliant |
| 0 | ||
| 98267-0366 | Molex | 1.00mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 20 Circuits, 0.152m Cable Length, 0.22mm Cable Thickness, Tin(Sn) Plating RoHS : Compliant |
| 0 | ||
| 173110-0366 | Molex | FCT FWD ML SDR PLG 7W2 FMN RoHS : Compliant |
| 0 | ||
| 024212-0366 | ITT Interconnect Solutions | Circular Connector - Wall Mount - Contact Arangement: 16S-1 - Sockets - Threaded Coupling - Endbell w/Clamp & Bushing |
| 0 | ||
| 132039-0366 | ITT Interconnect Solutions | Circular Plastic Push Pull Straight Plug w/Cable Gray 14 Pin 2 A PLA Series | ITT Cannon PLA1G122A14 RoHS : Compliant |
| 0 | ||
| 67F130-0366 | Sensata Circuit Breakers | TO-220 thermostat close on rise RoHS : Compliant |
| 0 | ||
| 70280-0366 | Molex | RoHS : Compliant |
| 0 | ||
| 98268-0366 | Molex | 1.25mm Pitch Premo-Flex™ FFC Jumper, Opposite Side Contacts (Type D), 30 Circuits, 0.03m Cable Length, 0.22mm Cable Thickness, Tin(Sn) Plating RoHS : Compliant |
| 0 | ||
| 110375-0366 | ITT Interconnect Solutions | KJ7T16N35SBL16 / 110375-0366 / Circular RoHS : Compliant |
| 0 | ||
| 042941-0366 | ITT Interconnect Solutions | DPKB-48PC-7; Rack & Panel; Rack & Panel RoHS : Compliant |
| 0 | ||
 Rochester Electronics | V62/03667-01YE | Texas Instruments | Buffer/Line Driver Buffer, Non-Inverting 2 Element 4 Bits 3.3V 20-SOP T/R RoHS : Compliant |
| 416 | |
LMH0366SQX/NOPB | Texas Instruments | Video Processor Reclocker Professional Video 24-QFN T/R RoHS : Compliant |
| 9,000 | ||
CY8C20366-24LQXI | Cypress Semiconductor | Touch Screen Controller 1.71V 24-QFN RoHS : Compliant |
| 3,927 | ||
| FV8050366200 SL27J | Intel Corporation | Microprocessor, 32-Bit, 200MHz, CMOS, PPGA296 |
| 445 | ||
| TT8050366166 SL26T | Intel Corporation | Microprocessor, 32-Bit, 166MHz, CMOS RoHS : Not Compliant |
| 46,800 | ||
R5F10366ASP#V0 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 2kB (2k x 8) 24MHz 20-SOP Tray RoHS : Compliant |
| 55 | ||
| R5F10366DSP#V5 | Renesas Electronics Corporation | IC MCU RL78 16Bit 1 Core FLASH 2kB (2k x 8) 24MHz 20-SOP Tube RoHS : Compliant |
| 423 | ||
| RJK0366DPA-00#J0 | Renesas Electronics Corporation | Power Field-Effect Transistor, MOSFET RoHS : Compliant |
| 19,800 | ||
| RJK0366DPA-02#J0B | Renesas Electronics Corporation | MOSFET N-Channel 30V 25A 8-SON T/R RoHS : Compliant |
| 5,000 | ||
| RJK0366DPA-WS#J0 | Renesas Electronics Corporation | Power Field-Effect Transistor, N-Channel MOSFET RoHS : Compliant |
| 1,008 | ||
| RJK0366DSP-00#J0 | Renesas Electronics Corporation | MOSFET N-Channel 30V 11A 8-SOIC T/R RoHS : Compliant |
| 22,500 | ||
 Sager | RCV-46403665 | Carling Technologies | Rocker Switches | 0 | ||
| 203-66-4202-4 | Sensata Circuit Breakers | Circuit Breakers | 0 | |||
| 5025840366 | Molex | Headers & Wire Housings 1.5 W/BSglSTAssy3CktGreenEmbsTpPkg RoHS : Compliant | 0 | |||
| 800-40-036-61-001000 | Mill-Max Mfg Corp | Headers & Wire Housings STANDARD PIN HEADER RoHS : Compliant |
| 0 | ||
| CA1-B0-36-650-321-C | Carling Technologies | Circuit Breakers CA1B036650321C RoHS : Compliant |
| 0 | ||
| CA1-B0-36-680-331-C | Carling Technologies | Circuit Breakers CA1B036680331C RoHS : Compliant |
| 0 | ||
| AA1-B0-36-630-5D1-C | Carling Technologies | Circuit Breakers AA1B0366305D1C RoHS : Compliant |
| 0 | ||
| S1SS-03-28-T-03.66-D-NDS | Samtec Inc | Rectangular Cable Assemblies 1.00 mm Single Row Discrete Wire Cable Assembly, Socket RoHS : Compliant | 0 | |||
| RCV-46403668 | Carling Technologies | Rocker Switches | 0 | |||
| E03665-000 | TE Connectivity | Circular MIL Spec Strain Reliefs & Adapters TXR40AU00-1410BI RoHS : Compliant | 0 | |||
| DD1-B0-36-620-131-D | Carling Technologies | Circuit Breakers DD1B036620131D RoHS : Compliant |
| 0 | ||
| DA1-B0-36-630-131-D | Carling Technologies | Circuit Breakers DA1B036630131D RoHS : Compliant |
| 0 | ||
| CA1-B0-36-690-321-L | Carling Technologies | Circuit Breakers CA1B036690321L RoHS : Compliant |
| 0 | ||
| CA2-B0-36-625-121-C | Carling Technologies | Circuit Breakers CA2B036625121C RoHS : Compliant |
| 0 | ||
| CA3-B0-36-670-31A-C | Carling Technologies | Circuit Breakers CA3B03667031AC RoHS : Compliant |
| 0 | ||
 TME | 5-103669-4 | TE Connectivity | Connector: wire-board; male; data; Inom: 3A; 600V; PIN: 5; shrouded RoHS : Compliant |
| 3,920 | |
| 1703661-1 | TE Connectivity | Connector: automotive; terminal; female; Automotive; PIN: 6; black RoHS : Compliant |
| 174 | ||
| 1300850366 | Molex | 1300850366 RoHS : Compliant |
| 1 | ||
| RZ0366C | Hammond Manufacturing | Enclosure: multipurpose; X: 80mm; Y: 82mm; Z: 55mm; Ritec; ABS; beige |
| 1 | ||
| 05003669001 | Wera | Socket: 6-angles; socket spanner; HEX 6mm; 1/4" |
| 0 | ||
| 1190366 | Phoenix Contact | Connector: PCB terminal block; power supply; 24A; 400V; PIN: 5 RoHS : Compliant |
| 0 | ||
| SLVW403660Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 60; THT; 1.5A |
| 0 | ||
| SLVW4KA03662Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 62; THT; 1.5A |
| 0 | ||
| SLVW203666Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 66; THT; 1.5A |
| 0 | ||
| SLY8SMD03660SBSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 60; SMT; 3A; 100V |
| 0 | ||
| SLY8SMD03662GBSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 62; SMT; 3A; 100V |
| 0 | ||
| SLY8SMD03664S | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 64; SMT; 3A; 100V |
| 0 | ||
| SLY8SMD03666G | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 66; SMT; 3A; 100V |
| 0 | ||
| SLY8SMD03668ZSM | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 68; SMT; 3A; 100V |
| 0 | ||
| SLVW20366Z | Fischer Elektronik GmbH & Co KG | Connector: pin strips; pin header; male; data; PIN: 6; THT; 1.5A |
| 0 | ||
 Ameya Holding Limited | LMH0366SQX/NOPB | Texas Instruments | IC RECLOCKER 3GBPS HD/SD 24WQFN RoHS : Compliant | 27,355 | ||
 ComSIT USA | 12500366 | LONGWELL COMPANY | AVAILABLE EU | 113 | ||
ComSIT USA | 955036671 | Molex | Jacks Jack 6p6c (RJ11, RJ12, RJ14, RJ25) POS Vertical Unshielded Tube RoHS : Compliant | 7,011 | ||
| 203660B3LF | Bourns Inc | Gas Discharge Tube 600V �20% 10kA Axial Tray RoHS : Compliant | 4,971 | |||
| 9036646997 | HARTING Technology Group | Backplane Connectors RoHS : Compliant | 527 | |||
| 1840366V0 | Phoenix Contact | PLUG COMPONENT Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 350 | |||
| CM30366G00 | Sharlight Electronics | Electronic Component RoHS : Not Compliant | 88 | |||
FV8050366200 | Intel Corporation | EMBEDDED PENTIUM PROCESSOR WITH MMX TECHNOLOGY Microprocessor, 32-Bit, 200MHz, CMOS, PPGA296 RoHS : Not Compliant | 30 | |||
| FV8050366200SL27J | Intel Corporation | EMBEDDED PENTIUM PROCESSOR WITH MMX TECHNOLOGY Microprocessor, 32-Bit, 200MHz, CMOS, PPGA296 RoHS : Not Compliant | 5 | |||
 Interstate Connecting Components | 0366-0-15-01-13-01-10-0 | Mill-Max Mfg Corp | RoHS : Not Compliant |
| 375 | |
| GCA20366SBM2901 | Amphenol PCD | RECEPTACLE, CRIMP, 6 CONTACTS | 0 | |||
| C93-830366-02P | Amphenol Industrial Operations | INLINE RECEPTACLE ASSEMBLY WIT BLACK ZINC PLATED NON PRE-TINN | 0 | |||
| N02 036 6126 001 | Amphenol Sine Systems | RADSOK 3.6 MM SOCKET CONTACT F | 0 | |||
| N020366126001C | Amphenol Sine Systems | CRIMP SOCKET CONTACT 3,6MM | 0 | |||
| AC-D03665 | TE Connectivity | 1/4-28 TO M6 ADAPTER | 0 | |||
| 121005-0366 | ITT Interconnect Solutions | CA3106E20-29P-DN | 0 | |||
| 5-103669-7 | TE Connectivity | 08 MTE HDR SRST LATCH W/HLDWN RoHS : Compliant |
| 0 | ||
| 102-0366-000 | ITT Interconnect Solutions | 1020366000 | 0 | |||
| 1SNA290366R1500 | TE Connectivity | PC5.34 RoHS : Compliant | 0 | |||
| 2003661-F | TE Connectivity | HCEM200DBE8P3; PRES+-200MBAR; RoHS : Compliant | 0 | |||
| 5-103669-5 | TE Connectivity | 06 MTE HDR SRST LATCH W/HLDWN RoHS : Compliant |
| 0 | ||
| 97-60-36(689) | Amphenol Industrial Operations | 5015 RECP#36 CAP BEAD CHAIN |
| 0 | ||
| GTS070-36-6PW(027) | Amphenol Industrial Operations | RECEPTACLE | 0 | |||
| 55A7036-6-9CS2704 | TE Connectivity | 55A7036-6-9CS2704 | 0 | |||
 NexGen Digital | 12534.6003.66 | 3M | 21 | |||
 PEI Genesis | GTC030-36-6P-023-LC | Amphenol Corporation |
| 350 | ||
| GTC030-36-6PZ-023-B30-LC | Amphenol Corporation |
| 350 | |||
| GTC030-36-6PZ | Amphenol Corporation |
| 213 | |||
| GTC030-36-6PY | Amphenol Corporation |
| 213 | |||
| GTC030-36-6PY-LC | Amphenol Corporation |
| 213 | |||
| GTC030-36-65P-B30-LC | Amphenol Corporation |
| 95 | |||
| GTC030-36-64P-023-LC | Amphenol Corporation |
| 95 | |||
| GTS030-36-6PW-023 | Amphenol Corporation |
| 52 | |||
| GTS030-36-6PY | Amphenol Corporation |
| 52 | |||
| 10-036675-008 | Amphenol Corporation |
| 0 | |||
| AIB0-36-6SXS | Amphenol Corporation |
| 0 | |||
| GTC030-36-64S-B30-LC | Amphenol Corporation |
| 0 | |||
| 448-53003-66 | SOURIAU-SUNBANK |
| 0 | |||
| A3036621-2 | SOURIAU-SUNBANK |
| 0 | |||
| C2000036651 | Amphenol PCD |
| 0 | |||
 Powell Electronics | 6-2203663-7 | TE Connectivity | Connectors |
| 5,693 | |
| 5-103669-7 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 2,177 | ||
| GTC030-36-6PZ | Amphenol Corporation | CONNECTOR |
| 141 | ||
| GTC030-36-6PY | Amphenol Corporation | CONNECTOR |
| 141 | ||
| GTC030-36-6PY-LC | Amphenol Corporation | CONNECTOR |
| 141 | ||
| GTC030-36-65P-B30-LC | Amphenol Corporation | CONNECTOR |
| 63 | ||
| GTC030-36-64P-023-LC | Amphenol Corporation | CONNECTOR |
| 63 | ||
| GTS030-36-6PW-023 | Amphenol Corporation | CONNECTOR |
| 34 | ||
| GTS030-36-6PY | Amphenol Corporation | CONNECTOR |
| 34 | ||
| 87-443036-66F | Amphenol Corporation | RECEPT |
| 20 | ||
| 87-463036-66P | Amphenol Corporation | RECEPT |
| 20 | ||
| 1-6609036-6 | TE Connectivity | TE COMPONENT (REF 1-6609036-6) RoHS : Compliant |
| 8 | ||
| 800366-SF | TE Connectivity | Connectors RoHS : Compliant |
| 7 | ||
| 87-463036-66R | Amphenol Corporation | RECEPT |
| 4 | ||
| 88-443036-66S | Amphenol Corporation | RECEPT |
| 3 | ||
 PUI | 12.60366 | 795 | ||||
 Richardson RFPD | 80366534 | HUBER+SUHNER | minibend Cable Assembly Coaxial RoHS : Compliant |
| 225 | |
| 534CB000366DG | Skyworks Solutions Inc | Oscillator XO 80MHz/ 100MHz/ 125MHz/ 150MHz ±31.5p RoHS : Compliant |
| 0 | ||
| 5-103669-7 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm So RoHS : Compliant | 0 | |||
| CER0366B | CTS Corporation | BAND PASS FILTER RoHS : Compliant | 0 | |||
| 1-6609036-6 | TE Connectivity | Power Line Filter RFI 50Hz/60Hz 40A 250VAC Threade RoHS : Compliant | 0 | |||
| SI5335D-B03662-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| 5-103669-5 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 6 POS 2.54mm So RoHS : Compliant | 0 | |||
| 80366525 | HUBER+SUHNER | Microbend 2SR-4.5 RoHS : Compliant | 0 | |||
| 534GB000366DGR | Skyworks Solutions Inc | Oscillator XO 80MHz/ 100MHz/ 125MHz/ 150MHz ±31.5p RoHS : Compliant |
| 0 | ||
| 5-103669-1 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 2 POS 2.54mm So RoHS : Compliant |
| 0 | ||
| CER0366A | CTS Corporation | Ceramic Filters Band Pass 1747.5MHz 2.5dB SMD T/R RoHS : Compliant | 0 | |||
| R203665030 | Radiall | Conn SSMB 0Hz to 4GHz 50Ohm Solder RA Thru-Hole RC RoHS : Compliant |
| 0 | ||
| 6-103669-0 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 11 POS 2.54mm S RoHS : Compliant | 0 | |||
| 5-103669-2 | TE Connectivity | Conn Shrouded Header (4 Sides) HDR 3 POS 2.54mm So RoHS : Compliant | 0 | |||
| 1003666-01 | Kyocera AVX Components | 5 GHz Single Band Stamped Metal Embedded Antenna D RoHS : Compliant | 0 | |||
 Chip 1 Exchange | 170366-1 | TE Connectivity | INSTOCK RoHS : Compliant | 86,143 | ||
| CRCW060366K5FKEA | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 9,483 | |||
| 0036-675 (RUF ART.- NR.) | INSTOCK | 5,204 | ||||
| 1840366- | Phoenix Contact | INSTOCK | 2,148 | |||
| MGF10036-6-0-3636 | GAV | INSTOCK | 1,800 | |||
| MGF10036-6-0-3636 | STOCK | INSTOCK | 1,474 | |||
| MGF-10036-6-03636 | INSTOCK | 1,080 | ||||
| 26P0366 | SANYO Semiconductor Co Ltd | INSTOCK | 1,075 | |||
| 43120203664 | Philips Semiconductors | INSTOCK | 960 | |||
| 12.60366 | Geyer Electronic E K | INSTOCK | 795 | |||
| CRCW060366K5FK | Vishay Intertechnologies | INSTOCK | 267 | |||
| 280366- | INSTOCK | 63 | ||||
| 2036-60-SM-###LF | Bourns Inc | INSTOCK | 45 | |||
| 170366-1 | Arrow Fastner Company | INSTOCK | 22 | |||
| 48036600 | INSTOCK | 1 | ||||
 Avnet Abacus | CRCW060366K5FKEA | Vishay Intertechnologies | SMD Chip Resistor 665 kohm 1 125 mW 0603 1608 Metric Thick Film General Purpose - Tape and Reel (Alt: CRCW060366K5FKEA) RoHS : Compliant | 195,000 | ||
| 170366-1 | TE Connectivity | Contact Crimp 18 AWG (Alt: 170366-1) RoHS : Compliant | 126,000 | |||
| TNPW060366K5BEEA | Vishay Intertechnologies | SMD Chip Resistor 665 kohm 01 125 mW 0603 1608 Metric Thin Film Sulfur Resistant - Tape and Reel (Alt: TNPW060366K5BEEA) RoHS : Compliant | 5,000 | |||
| 2036-60-SM-RPLF | Bourns Inc | Surge Protector TR - Tape and Reel (Alt: 2036-60-SM-RPLF) RoHS : Compliant | 3,000 | |||
| 1840366 | Phoenix Contact | Pluggable Terminal Block 35 mm 2 Ways 28 AWG 16 AWG 15 mm Screw (Alt: 1840366) RoHS : Compliant | 750 | |||
| 955036671 | Molex | Modular Connector Modular Jack 1 x 1 Port 6P6C Cat3 Surface Mount (Alt: 955036671) RoHS : Compliant | 246 | |||
| N010366501001 | Amphenol Corporation | Rectangular Power Contact boardmate Series Pin Press Fit (Alt: N010366501001) RoHS : Compliant | 100 | |||
| 003660158 | Pulse Electronics Corporation | Adpater Set 5521 including 8 part set (Alt: 003660158) RoHS : Compliant | 77 | |||
| 5036600410 | Molex | Conn Wire to Board HDR 4 POS 2mm Solder RA ThruHole Tray (Alt: 5036600410) RoHS : Compliant | 0 | |||
| 5036600410 | Molex | Conn Wire to Board HDR 4 POS 2mm Solder RA ThruHole Tray (Alt: 5036600410) RoHS : Compliant | 0 | |||
| 95003-6641 | Molex | (Alt: 3074457345655996346) RoHS : Compliant | 0 | |||
| MAL203669109E3 | Vishay Intertechnologies | (Alt: MAL203669109E3) RoHS : Compliant | 0 | |||
| MAL203669229E3 | Vishay Intertechnologies | (Alt: MAL203669229E3) RoHS : Compliant | 0 | |||
| N020366126001C | Amphenol Corporation | Contact Socket Crimp Straight Cable Mount (Alt: N020366126001C) RoHS : Compliant | 0 | |||
| 81036-600203-RB | 3M | Conn Ejector Header HDR 36 POS 127mm Solder ST ThruHole (Alt: 7000057134) RoHS : Compliant | 0 | |||
Avnet Asia | 0367500366 | Molex | 0W4729 WIRE ASSY BLK CB TO L3 OUTLETS (Alt: 0367500366) RoHS : Compliant | 0 | ||
| CRCW060366K5FKEA | Vishay Intertechnologies | SMD Chip Resistor, 66.5 kohm, ? 1%, 125 mW, 0603 [1608 Metric], Thick Film, General Purpose (Alt: CRCW060366K5FKEA) RoHS : Compliant | 0 | |||
| 0366620003 | Molex | BRASS 0.187 RECEPTACLE PLATED,701-0170-Z (Alt: 0366620003) RoHS : Compliant | 0 | |||
0955036651 | Molex | (Alt: 0955036651) RoHS : Compliant | 0 | |||
| 0366440003 | Molex | Connector Housing, Receptacle, 3 Contacts, 1 Row, 6.35 mm, 36644 Series, Nylon, MLX, Natural (Alt: 0366440003) RoHS : Compliant | 0 | |||
| TNPW060366K5BEEA | Vishay Intertechnologies | SMD Chip Resistor, 66.5 kohm, ? 0.1%, 125 mW, 0603 [1608 Metric], Thin Film, Sulfur Resistant (Alt: TNPW060366K5BEEA) RoHS : Compliant | 0 | |||
| N02-036-6126-001C | Amphenol Corporation | AHLN02-036-6126-001C CABLE CONNECTOR (Alt: N02-036-6126-001C) RoHS : Compliant | 0 | |||
| 117-03662-02 | Amphenol Corporation | (Alt: 117-03662-02) RoHS : Compliant | 0 | |||
| 5-103669-4 | TE Connectivity | (Alt: 5-103669-4) RoHS : Compliant | 0 | |||
| 0366380011 | Molex | Rectangular Connector, Header, 96 Contacts, Tin, Brass, Through Hole, Right Angle, 36638 Series (Alt: 0366380011) RoHS : Compliant | 0 | |||
| KDT00030ATR-SN00366 | onsemi | (Alt: KDT00030ATR-SN00366) RoHS : Compliant | 0 | |||
| 0366720018 | Molex | 0W01230B WIRE 12 BLK 3.5IN 187FO/.187FO (Alt: 0366720018) RoHS : Compliant | 0 | |||
| 0366720019 | Molex | 0W01232B WIRE 12 WHT3.5IN .187FO/.187FO (Alt: 0366720019) RoHS : Compliant | 0 | |||
0955036671 | Molex | Modular Connector, Modular Jack, 1 x 1 (Port), 6P6C, Cat3, Unshielded, Without Magnetics, SMT (Alt: 0955036671) RoHS : Compliant | 0 | |||
| 0366330009 | Molex | Pin Header, 4 Contacts, 2 Rows, 4.2mm, Tin, 9A, Straight, Shrouded, Brass, Wire-to-Board, THT (Alt: 0366330009) RoHS : Compliant | 0 | |||
 Avnet Silica | FL2500366 | Diodes Incorporated | Crystal Quartz 25 MHz SMD 32mm x 25mm x 068mm FL (Alt: FL2500366) RoHS : Compliant | 0 | ||
| LD11-0366FLF | Halo Electronics Inc | CMC Filter 40 to 85C 8Pin DIL (Alt: LD11-0366FLF) RoHS : Compliant | 0 | |||
| R5F10366ASP#55 | Renesas Electronics Corporation | (Alt: R5F10366ASP#55) RoHS : Compliant | 0 | |||
| C10366_PLATINUMROCKET-3-SS | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10366_PLATINUMROCKET-3-SS) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | 1703663 | TE Connectivity | 3 | |||
 Component Electronics, Inc | CRCW0603665RFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 14,750 | |
| 4312-020-36643 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 11,615 | ||
| CRCW0603665KFKEA | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,900 | ||
| CRCW06036651FRT1 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,900 | ||
| 503660-0600 | Molex | IN STOCK SHIP TODAY |
| 2,400 | ||
| 0366380012 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 2,268 | ||
| 170366-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,050 | ||
| 0366-0-15-01-13-14-10-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant | 860 | |||
| 170366-3 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 780 | ||
| 0366-0-15-01-13-01-10-0 | Mill-Max Mfg Corp | IN STOCK SHIP TODAY RoHS : Not Compliant | 775 | |||
| 0303660000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 71 | ||
| 103669-8 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 60 | ||
| TT8050366200 | Intel Corporation | IN STOCK SHIP TODAY | 50 | |||
| M39003/03-0366J | IN STOCK SHIP TODAY |
| 41 | |||
| 1-6609036-6 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
 DB Roberts | 1340366 | Essentra Components | 0 | |||
| 47-80-366-11 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 20036614 | Essentra Components | 0 | ||||
| AES10-366 | PennEngineering (PEM) | Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs. | 0 | |||
| 20036676 | Essentra Components | 0 | ||||
| 1440366 | Essentra Components | 0 | ||||
| 100366 | Pop Rivets | TAPK514BS 001 B5K | 0 | |||
| AEA10-366 | PennEngineering (PEM) | #10 | 0 | |||
| 47-80-366-10 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 4036-632-N | RAF Electronic Hardware | 0 | ||||
| 20036669 | Essentra Components | 0 | ||||
| 4036-632-SS | RAF Electronic Hardware | 0 | ||||
| AECH10-366 | PennEngineering (PEM) | #10 | 0 | |||
| 20036607 | Essentra Components | 0 | ||||
| 20036652 | Essentra Components | 0 | ||||
 EBV Elektronik | CM8071506036601S RPLV | Intel Corporation | (Alt: 99CL05) RoHS : Compliant | 0 | ||
| C10366_PLATINUMROCKET-3-SS | LEDIL | LENS ROUND 3 POS 50MM OD 156MM H (Alt: C10366_PLATINUMROCKET-3-SS) RoHS : Compliant | 0 | |||
 ECCO | 102-0366-000 | ITT Interconnect Solutions |
| 10 | ||
| 1020366000 | ITT Interconnect Solutions |
| 10 | |||
| 1030366000 | ITT Interconnect Solutions |
| 1 | |||
| 103-0366-000 | ITT Interconnect Solutions |
| 1 | |||
 FDH Electronics | 50110036-6 | W L Gore & Associates | BJG Microwave C | 718 | ||
| 170366-3 | TE Connectivity | Connector Acc RoHS : Compliant |
| 329 | ||
| 10-36675-22 | Amphenol Aerospace | Connector Acc | 45 | |||
| TF-0366 | Connector Technology Inc | Tooling - Test | 1 | |||
| 100-366-4045 | FDH Electronics | Placeholder | 1 | |||
| 2455RC-90820366 | Honeywell Sensing and Control | Thermistor |
| 0 | ||
| 000-36650-3RFX | Amphenol RF | Connector | 0 | |||
| 10-036675-016 | Amphenol Industrial Operations | Connector Acc | 0 | |||
| RJFSFTP5E0366 | Amphenol PCD | Cable Assembly | 0 | |||
| 3100 03660002 | Honeywell Sensing and Control | Thermostat |
| 0 | ||
 Maritex | 280366 | TE Connectivity | Rectangular Connector Housings; 280366; TE CONNECTIVITY; 2; 16; 16; Yes RoHS : Compliant |
| 1,824 | |
 Neutron USA | IL13P-US1-SJT-3160-366 | Schaffner | AC Power Cords C13 US Line plug Locking Plug 366cm |
| 50 | |
| 4430.3661 | Schurter Electronic Components | Circuit Breakers CBE TA45-ABDWR080C0 |
| 50 | ||
| 2903666 | Phoenix Contact | Industrial Relays Plug-in, 2 PDTs 24 V AC RoHS : Compliant |
| 12 | ||
| INMB100366-GFT | Incase | INCASE ICON SLEEVE WITH WOOLENEX FOR 13-INCH MACBOOK PRO - THUNDERBOLT 3 (USB-C) |
| 1 | ||
| 2903667 | Phoenix Contact | Power Relay, DPDT, 120VAC Coil, 250VAC, 250VDC, 12A, REL-IR2/L-120AC/2X21 RoHS : Compliant |
| 0 | ||
| 1840366 | Phoenix Contact | Pluggable Terminal Blocks 2 Pos 3.5mm pitch Plug 28-16 AWG Screw RoHS : Compliant |
| 0 | ||
| PR100366 | Kunbus GmbH | Industrial Box PCs RevPi Core SE 16GB |
| 0 | ||
| 0803666 | Phoenix Contact | Marker for terminal blocks, for PTIO 1.5/SXXX terminal blocks, 102, UCTU-TM (3,5X7) RoHS : Compliant |
| 0 | ||
| 09036642921 | HARTING Technology Group | DIN 41612 Connectors DIN-SIGNAL C064MS-3,0C1-1-COD RoHS : Compliant |
| 0 | ||
| 0800366 | Phoenix Contact | Cable Marker, Shrink sleeve, Roll, white, 60x9 mm field, 250Label/roll, WMS 4,8 (60X9)R, Price per roll RoHS : Compliant |
| 0 | ||
| SC0366 | Raspberry Pi | Audio IC Development Tools IQaudio Codec Zero |
| 0 | ||
| 2903668 | Phoenix Contact | Industrial Relays Plug-in, 2 PDTs 230 V AC |
| 0 | ||
| 2903669 | Phoenix Contact | Industrial Relays Plug-in, RELAY GEN PURPOSE 4PDT 6A 12V RoHS : Compliant |
| 0 | ||
| 1803662 | Phoenix Contact | PCB Connector, Female, 1row 11 Pos, 3.81mm pitch, 28-16 AWG Screw, MC 1,5/11-ST-3,81 RoHS : Compliant |
| 0 | ||
| 103990366 | Seeed Development Ltd | Daughter Cards & OEM Boards ARDUINO MKR CONNECTOR CARRIER (GROVE COMPATIBLE) |
| 0 | ||
 Pasternack Enterprises US | PE3W03661LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W03661LF is a SMA male to SMA male cable using PE-SR402FLJ coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W03661LF SMA male to SMA male cable assembly is constructed with PE-SR402FLJ coax. | 630 | ||
| PE3C3036-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400-UF Coax With Times Microwave Components., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3036-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C3036-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3036-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400-UF coax with Times Microwave components. |
| 303 | ||
| PE3W03661LF-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male to SMA Male Cable 150 cm Using PE-SR402FLJ Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 150 cm using PE-SR402FLJ coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 150 cm using PE-SR402FLJ coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W03661LF-150CM, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W03661LF-150CM is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 150 cm using PE-SR402FLJ coax, LF solder. |
| 63 | ||
| PE3W03661LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Male to SMA Male Cable 18 Inch Using PE-SR402FLJ Coax, LF Solder., Radio frequency assembly SMA male to SMA male cable 18 inch using PE-SR402FLJ coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 18 inch using PE-SR402FLJ coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3W03661LF-18, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W03661LF-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 18 inch using PE-SR402FLJ coax, LF solder. |
| 63 | ||
| PE3M0366-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Pin Cable 36 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0366-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0366-36 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0366-36 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA pin cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0366-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03664LF/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. MMCX Plug Right Angle to SMA Male Cable 36 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MMCX plug right angle to SMA male cable 36 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA male cable 36 inch length using RG316 coax with heatshrink, LF solder, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3W03664LF/HS-36 can also be known as a right angle MMCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA plug cable assembly PE3W03664LF/HS-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMCX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03664LF/HS-36 can also be used in the other direction and will be SMA male to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA male cable 36 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C10366-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 4.3-10 Male to N Male Low PIM Cable 180 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 180 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10366-180 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10366-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10366-180 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10366-180 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0366-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Pin Cable 48 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0366-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0366-48 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0366-48 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA pin cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0366-48 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03663-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm Push-On MCX Plug Right Angle to 75 Ohm BNC Female Bulkhead Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC bulkhead cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE3W03663-12 can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MCX male to BNC jack cable assembly PE3W03663-12 is built with RG179 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 75 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W03663-12 RF cable are available on our downloadable PDF datasheet.PE3W03663-12 can also be used in the other direction and will be BNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03664LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug Right Angle to SMA Male Cable 48 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MMCX plug right angle to SMA male cable 48 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA male cable 48 inch length using RG316 coax with heatshrink, LF solder, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3W03664LF/HS-48 can also be known as a right angle MMCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA plug cable assembly PE3W03664LF/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMCX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03664LF/HS-48 can also be used in the other direction and will be SMA male to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA male cable 48 inch length using RG316 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W03665/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. BNC Male to SHV Plug Cable Using 53 Ohm RG55 Coax with HeatShrink. PE3W03665/HS is a BNC male to SHV plug cable using RG55 coax. This Pasternack BNC male to SHV plug cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SHV for connector 2. Our male BNC to plug SHV cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W03665/HS BNC male to SHV plug cable assembly is constructed with RG55 coax. | 0 | |||
| PE3W03663-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 48 inches. 75 Ohm Push-On MCX Plug Right Angle to 75 Ohm BNC Female Bulkhead Cable 48 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm push-on MCX plug right angle to 75 Ohm BNC female bulkhead cable 48 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC bulkhead cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE3W03663-48 can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. MCX male to BNC jack cable assembly PE3W03663-48 is built with RG179 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 75 Ohm impedance and is single shielded. One connector features the crimp/solder attachment method and a brass body with gold plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W03663-48 RF cable are available on our downloadable PDF datasheet.PE3W03663-48 can also be used in the other direction and will be BNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3W03664LF/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Male Cable Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MMCX plug right angle to SMA male cable using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SMA male cable using RG316 coax with heatshrink, LF solder, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SMA cable connection on the other. Our right angle MMCX to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3W03664LF/HS can also be known as a right angle MMCX male to SMA plug cable assembly and will be shipped same-day as it is purchased. MMCX male to SMA plug cable assembly PE3W03664LF/HS is built with RG316 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMCX right angle plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03664LF/HS can also be used in the other direction and will be SMA male to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SMA cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SMA male cable using RG316 coax with heatshrink, LF solder. | 0 | |||
| PE3C10366-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-600, RF Cable Type: TCOM-600, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. 4.3-10 Male to N Male Low PIM Cable 120 Inch Length Using TCOM-600 Coax With Times Microwave Components., Radio frequency assembly 4.3-10 male to N male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 4.3-10 male to N male low PIM cable 120 inch length using TCOM-600 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to type N cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a 4.3-10 cable connection on one end and a type N cable connection on the other. Our low PIM a 4.3-10 to a type N cable assembly has male gender on end 1 and male on end 2. PE3C10366-120 can also be known as a low PIM 4.3-10 plug to type N plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10366-120 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 100 dB. 4.3-10 plug to type N plug cable assembly PE3C10366-120 is built with TCOM-600 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to type N cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10366-120 can also be used in the other direction and will be type N male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to type N low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0366-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMA, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Size: 8, Connector 2 Gender: Pin, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMA Size 8 Contact Pin to BMA Size 8 Contact Pin Cable 24 Inch Length Using PE-P086 Coax with HeatShrink, LF Solder. The PE3M0366-24 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMA pin contact connection on one end and a BMA pin connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMA to BMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0366-24 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMA pin to BMA pin cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0366-24 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMA pin to BMA pin cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0366-24 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMA to BMA RF cable are available on our downloadable PDF datasheet. BMA pin to BMA pin cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to BMA RF cable assembly as per your requirements. |
| 0 | ||
 TE Connectivity | 5-103669-5 | TE Connectivity | 06 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 6 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 6 | PCB Header & Receptacle | Part Number: 5-103669-5 | Internal Number: 5-103669-5 | TE Connectivity RoHS : Compliant |
| 30,283 | |
| 5-103669-3 | TE Connectivity | 04 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 4 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 4 | PCB Header & Receptacle | Part Number: 5-103669-3 | Internal Number: 5-103669-3 | TE Connectivity RoHS : Compliant |
| 8,167 | ||
| 5-103669-6 | TE Connectivity | 07 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 7 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 7 | PCB Header & Receptacle | Part Number: 5-103669-6 | Internal Number: 5-103669-6 | TE Connectivity RoHS : Compliant |
| 3,612 | ||
| 5-103669-8 | TE Connectivity | 09 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 9 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 9 | PCB Header & Receptacle | Part Number: 5-103669-8 | Internal Number: 5-103669-8 | TE Connectivity RoHS : Compliant |
| 3,279 | ||
| 2-1744036-6 | TE Connectivity | 06P ECONOMY POWER .200 CL HSG Number of Positions: 6 Connector & Housing Type: Plug Connector Product Type: Housing Connector System: Wire-to-Board UL Flammability Rating: UL 94V-0 Standard Rectangular Connector | 6 Plug Housing Wire-to-Board | Part Number: 2-1744036-6 | Internal Number: 2-1744036-6 | TE Connectivity RoHS : Compliant |
| 3,088 | ||
| 5-103669-9 | TE Connectivity | 10 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 10 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 10 | PCB Header & Receptacle | Part Number: 5-103669-9 | Internal Number: 5-103669-9 | TE Connectivity RoHS : Compliant |
| 2,775 | ||
| 6-103669-0 | TE Connectivity | 11 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 11 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 11 | PCB Header & Receptacle | Part Number: 6-103669-0 | Internal Number: 6-103669-0 | TE Connectivity RoHS : Compliant |
| 2,260 | ||
| 5-103669-4 | TE Connectivity | 05 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 5 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 5 | PCB Header & Receptacle | Part Number: 5-103669-4 | Internal Number: 5-103669-4 | TE Connectivity RoHS : Compliant |
| 1,922 | ||
| 170366-4 | TE Connectivity | MINI UNIVERSAL M-N-L SOCKET LP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Pre-Tin Wire Size: 22 – 18 AWG Operating Voltage: 600 VAC Tin (Sn) Socket Pre-Tin 22 – 18 AWG | Connector Contact | Part Number: 170366-4 | Internal Number: 170366-4 | TE Connectivity RoHS : Compliant |
| 1,504 | ||
| 103669-3 | TE Connectivity | 04 MTE HDR SRST LATCH W/HLDWN Part Number: 103669-3 | Internal Number: 103669-3 | TE Connectivity RoHS : Compliant |
| 1,280 | ||
| 5-103669-7 | TE Connectivity | 08 MTE HDR SRST LATCH W/HLDWN PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 8 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 8 | PCB Header & Receptacle | Part Number: 5-103669-7 | Internal Number: 5-103669-7 | TE Connectivity RoHS : Compliant |
| 605 | ||
| IL13-US2-SJT-3100-366 | TE Connectivity | IL13-US2-SJT-3100-366 Operating Voltage (Max): 125 VAC Current Rating (Max): 10 A Product Length: 3660 mm Product Length: 144.09 in IP Rating: IP20 Il 13 & Il 13 P & Il 19 | 125 VAC 10 A 3660 mm 144.09" | Part Number: IL13-US2-SJT-3100-366 | Internal Number: 813217-SF | TE Connectivity RoHS : Compliant |
| 599 | ||
| 280366 | TE Connectivity | AMPMODU II REC. HSG DUAL ROW, 16 POS. Number of Positions: 16 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching Standard Rectangular Connector | 16 Receptacle Housing With | Part Number: 280366 | Internal Number: 280366 | TE Connectivity RoHS : Compliant |
| 142 | ||
| IL13-US1-SVT-3100-366 | TE Connectivity | IL13-US1-SVT-3100-366 Operating Voltage (Max): 125 VAC Current Rating (Max): 10 A Product Length: 3660 mm Product Length: 144.09 in IP Rating: IP20 Il 13 & Il 13 P & Il 19 | 125 VAC 10 A 3660 mm 144.09" | Part Number: IL13-US1-SVT-3100-366 | Internal Number: 814351-SF | TE Connectivity RoHS : Compliant |
| 94 | ||
| 1-6609036-6 | TE Connectivity | 40VSK6=F7775 S0 Current Rating: 40 A Input Termination Type: Stud Output Termination Type: Stud Leakage Current (Max) (120VAC, 60Hz): .75 mA Leakage Current (Max) (250VAC, 50Hz): 1.25 mA Single Phase Filters & Corcom Sk Series | 40 A Stud .75 mA | Part Number: 1-6609036-6 | Internal Number: 1-6609036-6 | Alias Number: 40VSK6 | TE Connectivity RoHS : Compliant |
| 76 | ||
 Vyrian | 2900366 | Phoenix Contact | Relays/Accessories RoHS : Compliant | 10,472 | ||
V62/03668-01XE | Texas Instruments | Microprocessor Circuit, BICMOS, PDSO24 RoHS : Compliant | 9,343 | |||
| LMH0366SQE/NOPB | Texas Instruments | Analog Circuit, 1 Func, 1 Channel RoHS : Compliant | 8,536 | |||
V62/03664-01YE | Texas Instruments | Single-Ended Multiplexer, 1 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 8,414 | |||
| 1-1617036-6 | TE Connectivity | Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.044A (Coil), 1170mW (Coil), 4A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output, Through Hole-Straight Mount RoHS : Not Compliant | 7,329 | |||
V62/03662-02XE | Texas Instruments | Inverter, LV/LV-A/LVX/H Series, 6-Func, 1-Input, CMOS, PDSO14 RoHS : Compliant | 6,826 | |||
| 5962-01-303-6677 | Texas Instruments | NAND Gate, CMOS, PDIP14 RoHS : Not Compliant | 6,799 | |||
| 1-6609036-6 | TE Connectivity | Single Phase EMI Filter, 250V RoHS : Compliant | 5,780 | |||
| 1201080366 | Molex | Cable Assembly RoHS : Compliant | 5,089 | |||
| 3036644 | Phoenix Contact | Connector Accessory, Cover Item RoHS : Compliant | 4,510 | |||
| LSI00366 | Broadcom Limited | 4,463 | ||||
V62/03665-01YE | Texas Instruments | Differential Multiplexer, 1 Func, 4 Channel, CMOS, PDSO16 RoHS : Compliant | 4,136 | |||
| V62/03667-01XE | Texas Instruments | Bus Driver, LVT Series, 2-Func, 4-Bit, True Output, CMOS, PDSO20 RoHS : Compliant | 4,087 | |||
| LMH0366SQ | Texas Instruments | Analog Circuit, 1 Func | 3,196 | |||
| SI5341D-D10366-GM | Skyworks Solutions Inc | Processor Specific Clock Generator, 350MHz, CMOS RoHS : Compliant | 552 | |||
 Win Source Electronics | LMH0366SQE/NOPB | Texas Instruments | 3 Gbps HD/SD SDI Low Power Reclocker with Integrated Eye Monitor RoHS : Compliant |
| 886 | |
| LMH0366SQ | Texas Instruments | Cable Driver 3Gbps 16-WQFN |
| 100 | ||
| LMH0366SQ/NOPB | Texas Instruments | IC VIDEO RECLOCKER 24WQFN RoHS : Compliant |
| 90 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand