 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0201ZJ4R7ABSTR nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
 ECCO | 10-824802-012 | Amphenol Industrial Operations |
| 727 | ||
 Pasternack Enterprises US | PE3W02012-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female 4 Hole Flange Low Loss Cable 36 Inch Length Using LMR-195 Coax., Radio frequency assembly N male to N female 4 hole flange low loss cable 36 inch length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female 4 hole flange low loss cable 36 inch length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type 4 hole flange cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3W02012-36, can also be known as a low loss N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3W02012-36 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type male to N type female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02012-36 can also be used in the other direction and will be type N female 4 hole flange to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female 4 hole flange low loss cable 36 inch length using LMR-195 coax. |
| 765 | |
| PE3W02012-50CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. N Male to N Female 4 Hole Flange Low Loss Cable 50 cm Length Using LMR-195 Coax., Radio frequency assembly N male to N female 4 hole flange low loss cable 50 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female 4 hole flange low loss cable 50 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type 4 hole flange cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W02012-50CM, can also be known as a low loss type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W02012-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02012-50CM can also be used in the other direction and will be type N female 4 hole flange to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female 4 hole flange low loss cable 50 cm length using LMR-195 coax. |
| 765 | ||
| PE3W02012-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. N Male to N Female 4 Hole Flange Low Loss Cable 150 cm Length Using LMR-195 Coax., Radio frequency assembly N male to N female 4 hole flange low loss cable 150 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to N female 4 hole flange low loss cable 150 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N 4 hole flange cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W02012-150CM, can also be known as a low loss type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE3W02012-150CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02012-150CM can also be used in the other direction and will be type N female 4 hole flange to N type male cable assembly if the opposite connectivity is required. Low loss N type plug to type N jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female 4 hole flange low loss cable 150 cm length using LMR-195 coax. |
| 765 | ||
| PE3W06020-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Banana Plug to SMA Male Cable 100 cm Length Using RG188-DS Coax., Radio frequency assembly banana plug to SMA male cable 100 cm length using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Banana plug to SMA male cable 100 cm length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom banana to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with banana cable connection on one end and SMA cable connection on the other. Our banana to SMA cable assemblies have a plug gender on end 1 and male on end 2. This banana to SMA cable is a plug to male coax assembly, PE3W06020-100CM, can also be known as a banana male to SMA plug cable assembly and will be shipped same-day as it is purchased. Banana male to SMA plug cable assembly PE3W06020-100CM is built with RG188-DS which is a flexible coax type. The Pasternack flexible Banana cable assembly is manufactured with banana to SMA cable connectors, has a impedance and is double shielded. RF specs on this banana plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06020-100CM can also be used in the other direction and will be SMA male to banana plug cable assembly if the opposite connectivity is required. Banana male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality banana to SMA cable assembly for quick shipment worldwide. Variations of banana cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this banana plug to SMA male cable 100 cm length using RG188-DS coax. |
| 412 | ||
| PE3FCA020-1M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex LC UPC to LC UPC, MM OM4, 2.0mm Riser, Aqua - 1 meter. Pasternack’s PE3FCA020-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex LC/UPC to LC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM4 patch cable assembly is optimized for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA020-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 336 | ||
| PE3020-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Right Angle Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly BNC male to BNC male right angle cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male right angle cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3020-12, can also be known as a BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3020-12 is built with RG58 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3020-12 can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle cable 12 inch length using RG58 coax. | 0 | |||
| PE3TC0201-120 | Pasternack Enterprises |
| 0 | |||
| PE3W02018LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: NMO Mount, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. NMO Mount Sexless to UHF Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3W02018LF/HS is a NMO Mount sexless to UHF male cable using LMR-195 coax. This Pasternack NMO Mount sexless to UHF male cable assembly uses a 50 Ohm NMO Mount for connector 1 and a 50 Ohm UHF for connector 2. Our sexless NMO Mount to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02018LF/HS NMO Mount sexless to UHF male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W00201LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3W02014LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. SMA Male to TNC Male Right Angle Cable Using PE-C100-LSZH Coax with HeatShrink, RoHS. PE3W02014LF/HS is a SMA male to TNC male right angle cable using PE-C100-LSZH coax. This Pasternack SMA male to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02014LF/HS SMA male to TNC male right angle cable assembly is constructed with PE-C100-LSZH coax. | 0 | |||
| PE3W00201LF/HS-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. SMA Male Right Angle to N Male Cable 150 cm Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male cable 150 cm length using RG400 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N male cable 150 cm length using RG400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W00201LF/HS-150CM, can also be known as a right angle SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3W00201LF/HS-150CM is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00201LF/HS-150CM can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male cable 150 cm length using RG400 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W02015 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50. N Female Bulkhead to MMCX Plug Right Angle Cable Using PE-047SR Coax. PE3W02015 is a type N female bulkhead to MMCX plug right angle cable using PE-047SR coax. This Pasternack N type female bulkhead to MMCX plug right angle cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm MMCX for connector 2. N type to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female type N bulkhead to plug MMCX right angle cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W02015 type N female bulkhead to MMCX plug right angle cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3W10201/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. SSMB Jack to MMCX Plug Cable Using RG178 Coax with HeatShrink. PE3W10201/HS is a SSMB jack to MMCX plug cable using RG178 coax. This Pasternack SSMB jack to MMCX plug cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm MMCX for connector 2. Our jack SSMB to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10201/HS SSMB jack to MMCX plug cable assembly is constructed with RG178 coax. | 0 | |||
| PE3W00201LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male Right Angle to N Male Cable 48 Inch Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male cable 48 inch length using RG400 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N male cable 48 inch length using RG400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to type N cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W00201LF/HS-48, can also be known as a right angle SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W00201LF/HS-48 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00201LF/HS-48 can also be used in the other direction and will be N type male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male cable 48 inch length using RG400 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W00201LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male Right Angle to N Male Cable 200 cm Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our right angle SMA to N type cable assemblies have a male gender on end 1 and male on end 2. This SMA to type N cable is a male to male coax assembly, PE3W00201LF/HS-200CM, can also be known as a right angle SMA plug to type N plug cable assembly and will be shipped same-day as it is purchased. SMA plug to N type plug cable assembly PE3W00201LF/HS-200CM is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA right angle male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00201LF/HS-200CM can also be used in the other direction and will be type N male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N male cable 200 cm length using RG400 coax with heatshrink, LF solder. |
| 0 | ||
 Teledyne HiRel | 8510201ZA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
| 8510201YA | Teledyne HiRel | PROM, UV ERASABLE, 8K X 8, 250 NS ACCESS TIME RoHS : Not Compliant | 0 | |||
| 5962-8870201RA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
| 5962-88702012A | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
| 5962-8870201SA | Teledyne HiRel | FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | C0201C0G500-6R8BNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;6.8pF;�0.1pF RoHS : Compliant | 60,000 | ||
| C0201C0G500-2R2BNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;2.2pF;�0.1pF RoHS : Compliant | 30,000 | |||
| C0201C0G250-100GNP | VENKEL LTD | Chip Capacitor;0201;C0G;25V;10pF;�2% RoHS : Compliant | 0 | |||
| C0201C0G250-470GNP | VENKEL LTD | Chip Capacitor;0201;C0G;25V;47pF;�2% RoHS : Compliant | 0 | |||
| C0201C0G500-0R3CNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;0.3pF;�0.25pF RoHS : Compliant | 0 | |||
| C0201C0G500-120GNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;12pF;�2% RoHS : Compliant | 0 | |||
| C0201C0G500-270KNP | VENKEL LTD | Chip Capacitor;0201;C0G;50V;27pF;�10% RoHS : Compliant | 0 | |||
| C0201HQN100-180JNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;18pF;�5% RoHS : Compliant | 0 | |||
| C0201HQN100-200GNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;20pF;�2% RoHS : Compliant | 0 | |||
| C0201HQN100-2R1BNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;2.1pF;�0.1pF RoHS : Compliant | 0 | |||
| C0201HQN100-4R0ANP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;4pF;�0.05pF RoHS : Compliant | 0 | |||
| C0201HQN100-4R8CNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;4.8pF;�0.25pF RoHS : Compliant | 0 | |||
| C0201HQN100-6R7BNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;6.7pF;�0.1pF RoHS : Compliant | 0 | |||
| C0201HQN100-7R4DNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;7.4pF;�0.5pF RoHS : Compliant | 0 | |||
| C0201HQN100-9R3CNP | VENKEL LTD | High-Q NP0 Capacitor;0201;HQN;10V;9.3pF;�0.25pF RoHS : Compliant | 0 | |||
 Vyrian | CH02016-50RGFTA | Vishay Intertechnologies | Fixed Resistor, Thin Film, 0.03W, 50ohm, 30V, 2% +/-Tol, 100ppm/Cel, Surface Mount, 02016 RoHS : Compliant | 15,789 | ||
| 02013J2R4BBSTR | KYOCERA AVX | Film Capacitor, Silicon Dioxide And Oxynitride, 25V, 4.1667% +Tol, 4.1667% -Tol, J, 30ppm/Cel TC, 0.0000024uF, Surface Mount, 0201 | 12,468 | |||
59020-1-U-05-A | Littelfuse Inc | Magnetic Sensor, Cylindrical RoHS : Compliant | 12,163 | |||
| XEV10-20-1P | Eaton Corporation | Electric Fuse, 20A, 500VDC, 20000A (IR), Inline/holder, 10x38mm | 11,180 | |||
| REF020149Z | Analog Devices Inc | 10,096 | ||||
| HCPL0201E | Broadcom Limited | 9,731 | ||||
| 02013J1R3PBSTR\\500 | KYOCERA AVX | Film Capacitor, Silicon Dioxide And Oxynitride, 25V, 1.5385% +Tol, 1.5385% -Tol, 30ppm/Cel TC, 0.0000013uF, Surface Mount, 0201 | 9,253 | |||
V62/03602-01XE | Texas Instruments | Bus Driver, ACT Series, 2-Func, 8-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 7,825 | |||
| REF020149Z:03 | Analog Devices Inc | 6,246 | ||||
| T2111020101-000 | TE Connectivity | Rectangular Connector, 2 Contact(s), Male RoHS : Compliant | 4,328 | |||
XC3020-100CB100B | AMD Xilinx | Field Programmable Gate Array, 64 CLBs, 1000 Gates, 100MHz, 64-Cell, CMOS, CQFP100 RoHS : Not Compliant | 4,076 | |||
XC3020-125PG84CSPC0110 | AMD Xilinx | Field Programmable Gate Array, 64 CLBs, 2000 Gates, 125MHz, CMOS, CPGA84 | 3,102 | |||
| XC3020-100PG84M | AMD Xilinx | Field Programmable Gate Array, 64 CLBs, 1000 Gates, 100MHz, 64-Cell, CMOS, CPGA84 RoHS : Compliant | 2,788 | |||
| XC3020-100PG84CSPC0107 | AMD Xilinx | Field Programmable Gate Array, 64 CLBs, 1000 Gates, 100MHz, CMOS, CPGA84 | 1,478 | |||
| 0201X474M4R0CT | Walsin Technology | Ceramic Capacitor, Multilayer, Ceramic, 4V, 20% +Tol, 20% -Tol, X5R, 15% TC, 0.47uF, Surface Mount, 0201 | 528 | |||
 Win Source Electronics | RC0201FR-07100KL | YAGEO Corporation | RES SMD 100K OHM 1% 1/20W 0201 RoHS : Compliant |
| 990,000 | |
| CC0201JRNPO9BN101 | YAGEO Corporation | CAP CER 100PF 50V C0G/NPO 0201 / 100 pF ±5% 50V Ceramic Capacitor C0G, NP0 0201 (0603 Metric) RoHS : Compliant |
| 990,000 | ||
| RC0201FR-0733RL | YAGEO Corporation | RES 33 OHM 1% 1/20W 0201 / 33 Ohms ±1% 0.05W, 1/20W Chip Resistor 0201 (0603 Metric) Moisture Resistant Thick Film RoHS : Compliant |
| 940,000 | ||
| 0201CG220J500NT | Fenghua (HK) Electronics Ltd |
| 333,340 | |||
SESD0201X1UN-0020-090 | TE Connectivity | Single-channel Silicon ESD Protection Devices RoHS : Compliant |
| 183,978 | ||
| RC0201JR-07390KL | YAGEO Corporation | RES 390K OHM 5% 1/20W 0201 RoHS : Compliant |
| 166,670 | ||
| CC0201JRNPO9BN220 | YAGEO Corporation | CAP CER 22PF 50V C0G/NPO 0201 / 22 pF ±5% 50V Ceramic Capacitor C0G, NP0 0201 (0603 Metric) RoHS : Compliant |
| 130,709 | ||
| FSMD020-1206-R | Fuzetec Technology Co Ltd | RESETTABLE FUSE - SMD, 1206 SIZE RoHS : Compliant |
| 100,000 | ||
NSS60201LT1G | onsemi | Trans GP BJT NPN 60V 2A 540mW Automotive 3-Pin SOT-23 T/R / TRANS NPN 60V 2A SOT-23 RoHS : Compliant |
| 36,666 | ||
| RC0201JR-07330RL | YAGEO Corporation | RES SMD 330 OHM 5% 1/20W 0201 RoHS : Compliant |
| 30,000 | ||
| CRCW02010000Z0ED | Vishay Huntington | RES SMD 0 OHM JUMPER 1/20W 0201 |
| 28,934 | ||
| HCPL-0201-000E | Broadcom Limited | OPTOISO 3.75KV PUSH PULL 8SO RoHS : Compliant |
| 21,670 | ||
| RC0201FR-072KL | YAGEO Corporation | RES SMD 2K OHM 1% 1/20W 0201 / THICK FILM CHIP RESISTORS Introduction RoHS : Compliant |
| 17,050 | ||
| ASP-134602-01 | Samtec Inc | CONN ARRAY PLUG 400POS SMD GOLD / VITA 57 CONNECTOR. RoHS : Compliant |
| 3,000 | ||
| FSMD020-1210-R | Fuzetec Technology Co Ltd | PPTC Resettable Fuse 30V .2A Hol RoHS : Compliant |
| 2,930 | ||
 Wuhan P&S | CRCW020110K0JNED | Vishay Intertechnologies | free Commodity Thick Film Chip ResistorsSMD,0.05W,10K��,5% RoHS : Compliant |
| 7,930,000 | |
| CRCW0201470RFNED | Vishay Intertechnologies | Lead (Pb)-Free Commodity Thick Film Chip Resistors RoHS : Compliant |
| 2,260,000 | ||
| CRCW020147K0FKED | Vishay Intertechnologies | Lead (Pb)-Free Commodity Thick Film Chip Resistors RoHS : Compliant |
| 1,480,000 | ||
| TNPW02012K49BEED | Vishay Intertechnologies | High Stability Thin Film Flat Chip Resistors��2.49 k�� ��0.1% 0.075W RoHS : Compliant |
| 60,000 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Indian
Mexican
British
New Zealand