0116TPK-R Price, nhà phân phối, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 6 inches. N Female Bulkhead to UMCX 2.5 Plug Cable 6 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our type N to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This type N to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1011-6, can also be known as a N type jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Type N jack to UMCX 2.5 male cable assembly PE3CA1011-6 is built with RG178 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UMCX 2.5 cable connectors, has a 50 Ohm impedance. RF specs on this 3 GHz maximum frequency N type female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1011-6 can also be used in the other direction and will be UMCX 2.5 plug to type N female bulkhead cable assembly if the opposite connectivity is required. N type jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS.

1 : $33.59
25 : $31.91
50 : $30.23
100 : $28.89

PE3C4011-60

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-FF430, RF Cable Type: PE-FF430, RF Cable Impedance: 50 Ohm, Length: 60 inches. Handheld RF Analyzer Rugged Phase Stable Cable N Male to TNC Female Cable 60 Inch Length Using PE-FF430 Coax, RoHS., Radio frequency assembly handheld RF analyzer rugged phase stable cable N male to TNC female cable 60 inch length using PE-FF430 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Handheld RF analyzer rugged phase stable cable N male to TNC female cable 60 inch length using PE-FF430 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our type N to TNC cable assemblies have a male gender on end 1 and female on end 2. This N type to TNC cable is a male to female coax assembly, PE3C4011-60, can also be known as a type N plug to TNC jack cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC jack cable assembly PE3C4011-60 is built with PE-FF430 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is sextuple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4011-60 can also be used in the other direction and will be TNC female to type N male cable assembly if the opposite connectivity is required. N type plug to TNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this handheld RF analyzer rugged phase stable cable N male to TNC female cable 60 inch length using PE-FF430 coax, RoHS.

1 : $1,480.0
25 : $1,406.0
50 : $1,332.0

PE3W00116

Pasternack Enterprises

Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. MCX Plug to BNC Male Cable Using PE-P195 Coax. PE3W00116 is a MCX plug to BNC male cable using PE-P195 coax. This Pasternack MCX plug to BNC male cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm BNC for connector 2. Our plug MCX to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00116 MCX plug to BNC male cable assembly is constructed with PE-P195 coax.

PE3W01167-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.92mm Male to BNC Male Cable 24 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to BNC male cable 24 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to BNC male cable 24 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and BNC cable connection on the other. Our 2.92mm to BNC cable assembly has male gender on end 1 and male on end 2. PE3W01167-24 can also be known as a 2.92mm plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to BNC plug cable assembly PE3W01167-24 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body with plating. Additional dimensions, specifications and CAD drawings for this PE3W01167-24 RF cable are available on our downloadable PDF datasheet.PE3W01167-24 can also be used in the other direction and will be BNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to BNC cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements.

1 : $193.99
25 : $184.29
50 : $174.59
100 : $166.83

PE3W01167-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.92mm Male to BNC Male Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to BNC male cable 12 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to BNC male cable 12 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and BNC cable connection on the other. Our 2.92mm to BNC cable assembly has male gender on end 1 and male on end 2. PE3W01167-12 can also be known as a 2.92mm plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to BNC plug cable assembly PE3W01167-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body with plating. Additional dimensions, specifications and CAD drawings for this PE3W01167-12 RF cable are available on our downloadable PDF datasheet.PE3W01167-12 can also be used in the other direction and will be BNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to BNC cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3W01161

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. 2.92mm Male to N Male Cable Using PE-SR402FL Coax. PE3W01161 is a 2.92mm male to N male cable using PE-SR402FL coax. This Pasternack 2.92mm male to N male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm N for connector 2. Our male 2.92mm to male N cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W01161 2.92mm male to N male cable assembly is constructed with PE-SR402FL coax.

PE3W01166

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 2.92mm Male to BNC Male Cable Using RG402 Coax. PE3W01166 is a 2.92mm male to BNC male cable using RG402 coax. This Pasternack 2.92mm male to BNC male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm BNC for connector 2. Our male 2.92mm to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01166 2.92mm male to BNC male cable assembly is constructed with RG402 coax.

PE3W01164

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female to Water Blue FAKRA Jack Cable Using LMR-100 Coax. PE3W01164 is a SMA female to FAKRA jack cable using LMR-100A coax. This Pasternack SMA female to FAKRA jack cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm FAKRA for connector 2. Our female SMA to jack FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01164 SMA female to FAKRA jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W01166/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm. 2.92mm Male to BNC Male Cable Using RG402 Coax with HeatShrink. PE3W01166/HS is a 2.92mm male to BNC male cable using RG402 coax. This Pasternack 2.92mm male to BNC male cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm BNC for connector 2. Our male 2.92mm to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W01166/HS 2.92mm male to BNC male cable assembly is constructed with RG402 coax.

PE3W01165

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Banana, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female to Banana Plug Cable Using RG58 Coax. PE3W01165 is a N female to Banana plug cable using RG58 coax. This Pasternack N female to Banana plug cable assembly uses a 50 Ohm N for connector 1 and a Banana for connector 2. Our female N to plug Banana cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01165 N female to Banana plug cable assembly is constructed with RG58 coax.

PE3W10116/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. UHF Male to SMA Male Right Angle Cable Using RG223 Coax with HeatShrink. PE3W10116/HS is a UHF male to SMA male right angle cable using RG223 coax. This Pasternack UHF male to SMA male right angle cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm SMA for connector 2. UHF to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male UHF to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10116/HS UHF male to SMA male right angle cable assembly is constructed with RG223 coax.

PE3W01163/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Water Blue FAKRA Jack to SMA Male Cable Using LMR-100 Coax with HeatShrink. PE3W01163/HS is a FAKRA jack to SMA male cable using LMR-100A coax. This Pasternack FAKRA jack to SMA male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01163/HS FAKRA jack to SMA male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE7011-6A

Pasternack Enterprises

Key Specifications, Design: None, Maximum Frequency: 1,000 MHz, Impedance: 50 Ohm, Power Maximum: 0.5 Watt, VSWR Maximum: 1.4:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 63 dB, Switching Time: 15,000,000 ns, Attenuation Accuracy per Step: 0.3 dB. 63 dB With 6 Bit Programmable Attenuator, SMA Female to SMA Female, 1 dB Steps Rated to 0.5 Watts Up to 1,000 MHz. PE7011-6A is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE7011-6A programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 63 dB with 6dB step sizes. Our programmable RF attenuator has frequency range of DC to 1 GHz and a maximum VSWR of 1.4. This adjustable SMA attenuator is rated to 0.5 Watt at the stated attenuation. Our attenuator PE7011-6A is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,640.0
5 : $1,574.4
10 : $1,508.8
25 : $1,443.2

PE3C0116/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using LMR-195 Coax with HeatShrink. PE3C0116/HS is a SMA male to SMA male cable using LMR-195 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C0116/HS SMA male to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W01167-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to BNC Male Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly 2.92mm male to BNC male cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to BNC male cable 18 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and BNC cable connection on the other. Our 2.92mm to BNC cable assembly has male gender on end 1 and male on end 2. PE3W01167-18 can also be known as a 2.92mm plug to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to BNC plug cable assembly PE3W01167-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body with plating. Additional dimensions, specifications and CAD drawings for this PE3W01167-18 RF cable are available on our downloadable PDF datasheet.PE3W01167-18 can also be used in the other direction and will be BNC male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to BNC cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements.

1 : $185.99
25 : $176.69
50 : $167.39
100 : $159.95

Venkel Ltd.

C0603C0G101-160JNE

VENKEL LTD

Chip Capacitor;0603;C0G;100V;16pF;�5%
RoHS : Compliant

36,000

C0603C0G101-160JNP

VENKEL LTD

Chip Capacitor;0603;C0G;100V;16pF;�5%
RoHS : Compliant

36,000

C1206C0G101-161JNP

VENKEL LTD

Chip Capacitor;1206;C0G;100V;160pF;�5%
RoHS : Compliant

C0805HQN501-160GNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;500V;16pF;�2%
RoHS : Compliant

C0505HQN101-160JNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;100V;16pF;�5%
RoHS : Compliant

C0805X7R101-162KNE

VENKEL LTD

Chip Capacitor;0805;X7R;100V;1600pF;�10%
RoHS : Compliant

C0505HQN101-160FNE

VENKEL LTD

High-Q NP0 Capacitor;0505;HQN;100V;16pF;�1%
RoHS : Compliant

C0603HQN101-160JNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;100V;16pF;�5%
RoHS : Compliant

C0805HQN101-160FNP

VENKEL LTD

High-Q NP0 Capacitor;0805;HQN;100V;16pF;�1%
RoHS : Compliant

C0402HQN201-160GNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;200V;16pF;�2%
RoHS : Compliant

C0402HQN101-160GNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;100V;16pF;�2%
RoHS : Compliant

C0402HQN101-160FNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;100V;16pF;�1%
RoHS : Compliant

C0603HQN101-160FNP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;100V;16pF;�1%
RoHS : Compliant

C0402HQN101-160JNP

VENKEL LTD

High-Q NP0 Capacitor;0402;HQN;100V;16pF;�5%
RoHS : Compliant

C0805X7R101-162KNP

VENKEL LTD

Chip Capacitor;0805;X7R;100V;1600pF;�10%
RoHS : Compliant

Waytek, Inc.

AT62-201-16141

Amphenol Sine Systems

AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194

15 : $0.4924
50 : $0.4644
100 : $0.43
200 : $0.415
500 : $0.3999
1,000 : $0.3849

303,500

AT62-201-1631

Amphenol Sine Systems

AT/AHD-9 Female Gold Socket Contact 20-16GA Size 16 Solid 0462-201-1631

1 : $1.0992
10 : $1.0255
50 : $0.9334
100 : $0.8781
200 : $0.8413
500 : $0.8167

33,772

19193-0116

Molex

12-10 GA 1/4" Ring Terminal Non-Insulated Brazed 32003
RoHS : Compliant

50 : $0.1867
200 : $0.177
500 : $0.1647
1,000 : $0.1581

19,658

29011-6

FTZ Industries

FTZ Industries 29011-6 dual-wall adhesive-lined heat shrink tubing is black polyolefin tubing with a 1" size and three 6" pieces per package. Its adhesive-lined construction supports moisture sealing, abrasion protection, and durable insulation, with 3 packaged per bag for service and repair work.

1 : $1.5356
5 : $1.3639

409

26011-6

FTZ Industries

FTZ Industries 26011-6 thin-wall heat shrink tubing is black polyolefin tubing supplied in 6" lengths with a 2:1 shrink ratio for wire, terminal, and splice protection. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable insulation, with 8 pieces per bag.

1 : $6.29
5 : $5.61

402