0070Y-R Price, nhà phân phối, Stock

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMB Jack to BNC Male Cable 36 Inch Length Using RG178 Coax., Radio frequency assembly SMB jack to BNC male cable 36 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC male cable 36 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and male on end 2. PE3W00702-36 can also be known as a SMB female to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMB female to BNC plug cable assembly PE3W00702-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00702-36 RF cable are available on our downloadable PDF datasheet.PE3W00702-36 can also be used in the other direction and will be BNC male to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3W00702-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMB Jack to BNC Male Cable 6 Inch Length Using RG178 Coax., Radio frequency assembly SMB jack to BNC male cable 6 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC male cable 6 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and male on end 2. PE3W00702-6 can also be known as a SMB female to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMB female to BNC plug cable assembly PE3W00702-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00702-6 RF cable are available on our downloadable PDF datasheet.PE3W00702-6 can also be used in the other direction and will be BNC male to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W00702-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack to BNC Male Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMB jack to BNC male cable 24 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC male cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and male on end 2. PE3W00702-24 can also be known as a SMB female to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.393 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. SMB female to BNC plug cable assembly PE3W00702-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W00702-24 RF cable are available on our downloadable PDF datasheet.PE3W00702-24 can also be used in the other direction and will be BNC male to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3W00706/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female to UHF Male Cable Using LMR-400-UF Coax with HeatShrink. PE3W00706/HS is a N female to UHF male cable using LMR-400-UF coax. This Pasternack N female to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our female N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00706/HS N female to UHF male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00707/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female to UHF Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N female to UHF male low loss cable 24 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to UHF male low loss cable 24 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss N type to UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W00707/HS-24 can also be known as a low loss N type jack to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N jack to UHF plug cable assembly PE3W00707/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type female to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00707/HS-24 can also be used in the other direction and will be UHF male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to UHF male low loss cable 24 inch length using LMR-400 coax with heatshrink.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3W00701

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. 2.92mm Male to Mini SMP Female Cable Using PE-SR405AL Coax. PE3W00701 is a 2.92mm male to Mini SMP female cable using PE-SR405AL coax. This Pasternack 2.92mm male to Mini SMP female cable assembly uses a 50 Ohm 2.92mm for connector 1 and a 50 Ohm Mini SMP for connector 2. Our male 2.92mm to female Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00701 2.92mm male to Mini SMP female cable assembly is constructed with PE-SR405AL coax.

PE3W00707LF

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. UHF Male to N Female Cable Using LMR-400 Coax, LF Solder. PE3W00707LF is a UHF male to N female cable using LMR-400 coax. This Pasternack UHF male to N female cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm N for connector 2. Our male UHF to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00707LF UHF male to N female cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00707

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to UHF Male Cable Using LMR-400 Coax. PE3W00707 is a N female to UHF male cable using LMR-400 coax. This Pasternack N female to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our female N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00707 N female to UHF male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00706LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Female to UHF Male Cable Using LMR-400-UF Coax with HeatShrink, LF Solder. PE3W00706LF/HS is a N female to UHF male cable using LMR-400-UF coax. This Pasternack N female to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our female N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00706LF/HS N female to UHF male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00707/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female to UHF Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N female to UHF male low loss cable 60 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to UHF male low loss cable 60 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss N type to UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W00707/HS-60 can also be known as a low loss N type jack to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N jack to UHF plug cable assembly PE3W00707/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00707/HS-60 can also be used in the other direction and will be UHF male to type N female cable assembly if the opposite connectivity is required. Low loss N type jack to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to UHF male low loss cable 60 inch length using LMR-400 coax with heatshrink.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

PE3W00705

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male to N Female Bulkhead Cable Using RG316 Coax. PE3W00705 is a reverse polarity SMA male to N female bulkhead cable using RG316 coax. This Pasternack reverse polarity SMA male to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our reverse polarity male SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00705 SMA reverse polarity male to N female bulkhead cable assembly is constructed with RG316 coax.

PE3W00707/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Female to UHF Male Low Loss Cable Using LMR-400 Coax with HeatShrink., Radio frequency assembly N female to UHF male low loss cable using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to UHF male low loss cable using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss N type to UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W00707/HS can also be known as a low loss type N jack to UHF plug cable assembly and will be shipped same-day as it is purchased. N type jack to UHF plug cable assembly PE3W00707/HS is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00707/HS can also be used in the other direction and will be UHF male to N type female cable assembly if the opposite connectivity is required. Low loss type N jack to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to UHF male low loss cable using LMR-400 coax with heatshrink.

PE3C10070

Pasternack Enterprises

PE3W00700/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-195 Coax with HeatShrink. PE3W00700/HS is a TNC male to SMA male cable using LMR-195 coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00700/HS TNC male to SMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00707/HS-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to UHF Male Low Loss Cable 12 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N female to UHF male low loss cable 12 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to UHF male low loss cable 12 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss type N to UHF cable assemblies have a female gender on end 1 and male on end 2. PE3W00707/HS-12 can also be known as a low loss type N jack to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N jack to UHF plug cable assembly PE3W00707/HS-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00707/HS-12 can also be used in the other direction and will be UHF male to N type female cable assembly if the opposite connectivity is required. Low loss type N jack to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to UHF male low loss cable 12 inch length using LMR-400 coax with heatshrink.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

BMC-Q1EY0070H

TE Connectivity

BMC-Q 0402 70R 25% Tol. High Current Impedance: 70 Ω Current Rating (Max): 450 mA DC Resistance: .2 Ω Package Size Code: 0402 Product Length: .039 in Automotive Grade Multilayer Chip Bead | 70 Ω 450 mA .2 Ω 0402 | Part Number: BMC-Q1EY0070H | Internal Number: 1-2176742-3 | TE Connectivity
RoHS : Compliant

10,000 : $0.05
5,000 : $0.06
2,500 : $0.06
1,000 : $0.06
500 : $0.06
250 : $0.06
100 : $0.06
50 : $0.06
25 : $0.06
10 : $0.06
1 : $0.07

20,000

BMC-Q1EY0070M

TE Connectivity

BMC-Q 0402 70R 25% Tol. UH Current Impedance: 70 Ω Current Rating (Max): 800 mA DC Resistance: .15 Ω Package Size Code: 0402 Product Length: .039 in Automotive Grade Multilayer Chip Bead | 70 Ω 800 mA .15 Ω 0402 | Part Number: BMC-Q1EY0070M | Internal Number: 1-2176746-0 | TE Connectivity
RoHS : Compliant

10,000 : $0.06
5,000 : $0.06
2,500 : $0.06
1,000 : $0.06
500 : $0.07
250 : $0.07
100 : $0.07
50 : $0.07
25 : $0.07
10 : $0.07
1 : $0.07

20,000

BMC-Q1JY0070H

TE Connectivity

BMC-Q 0603 70R 25% Tol. High Current Impedance: 70 Ω Current Rating (Max): 1000 mA DC Resistance: .15 Ω Package Size Code: 0603 Product Length: .062 in Automotive Grade Multilayer Chip Bead | 70 Ω 1000 mA .15 Ω 0603 | Part Number: BMC-Q1JY0070H | Internal Number: 1-2176743-3 | TE Connectivity
RoHS : Compliant

5,000 : $0.16
2,500 : $0.16
1,000 : $0.16
500 : $0.17
250 : $0.17
100 : $0.18
50 : $0.18
25 : $0.18
10 : $0.19
1 : $0.19

8,000

BMC-Q2AY0070H

TE Connectivity

BMC-Q 0805 70R 25% Tol. High Current Impedance: 70 Ω Current Rating (Max): 2500 mA DC Resistance: .08 Ω Package Size Code: 0805 Product Length: .078 in Automotive Grade Multilayer Chip Bead | 70 Ω 2500 mA .08 Ω 0805 | Part Number: BMC-Q2AY0070H | Internal Number: 1-2176744-2 | TE Connectivity
RoHS : Compliant

5,000 : $0.22
2,500 : $0.22
1,000 : $0.23
500 : $0.23
250 : $0.24
100 : $0.24
50 : $0.25
25 : $0.26
10 : $0.26
1 : $0.27

7,950

BMC-Q1JY0070M

TE Connectivity

BMC-Q 0603 70R 25% Tol. UH Current Impedance: 70 Ω Current Rating (Max): 2500 mA DC Resistance: .06 Ω Package Size Code: 0603 Product Length: .062 in Automotive Grade Multilayer Chip Bead | 70 Ω 2500 mA .06 Ω 0603 | Part Number: BMC-Q1JY0070M | Internal Number: 1-2176747-1 | TE Connectivity
RoHS : Compliant

5,000 : $0.17
2,500 : $0.18
1,000 : $0.18
500 : $0.18
250 : $0.19
100 : $0.19
50 : $0.2
25 : $0.2
10 : $0.21
1 : $0.21

7,940

BMC-Q2AY0070M

TE Connectivity

BMC-Q 0805 70R 25% Tol. UH Current Impedance: 70 Ω Current Rating (Max): 3000 mA DC Resistance: .04 Ω Package Size Code: 0805 Product Length: .078 in Automotive Grade Multilayer Chip Bead | 70 Ω 3000 mA .04 Ω 0805 | Part Number: BMC-Q2AY0070M | Internal Number: 1-2176748-2 | TE Connectivity
RoHS : Compliant

5,000 : $0.23
2,500 : $0.24
1,000 : $0.25
500 : $0.25
250 : $0.26
100 : $0.26
50 : $0.27
25 : $0.27
10 : $0.28
1 : $0.29

7,400

770070-1

TE Connectivity

03P .093 COMM P&S RECPT HSG Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Standard Rectangular Connector | 3 Receptacle Housing Crimp | Part Number: 770070-1 | Internal Number: 770070-1 | TE Connectivity
RoHS : Compliant

1,000 : $0.29
100 : $0.39
10 : $0.47
1 : $0.62

6,860

2007099-1

TE Connectivity

SFP+ 1x4 Light Pipe Assembly Pluggable Form Factor: SFP+ Number of Lightpipes: 8 Lightpipe Product Type: Lightpipe Lightpipe Configuration: Dual Round SFP+ 8 Lightpipe Dual Round | Light Pipe | Part Number: 2007099-1 | Internal Number: 2007099-1 | TE Connectivity
RoHS : Compliant

1,000 : $7.7
500 : $7.91
250 : $8.16
100 : $8.43
50 : $8.68
1 : $9.52

524

2007088-3

TE Connectivity

CONNECTOR ASSEMBLY, SEC II POW Connector System: Board-to-Board Number of Positions: 12 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 22 A Board-to-Board 12 2.54 mm .1" | Card Edge Power Connector | Part Number: 2007088-3 | Internal Number: 2007088-3 | TE Connectivity
RoHS : Compliant

1,000 : $7.84
500 : $8.07
250 : $8.32
100 : $8.59
50 : $8.84
1 : $9.71

228

2007088-2

TE Connectivity

CONNECTOR ASSEMBLY, SEC II POWER, P+16S Connector System: Board-to-Board Number of Positions: 10 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in Contact Current Rating (Max): 22 A Board-to-Board 10 2.54 mm .1" | Card Edge Power Connector | Part Number: 2007088-2 | Internal Number: 2007088-2 | TE Connectivity
RoHS : Compliant

1,000 : $4.75
500 : $4.89
250 : $5.04
100 : $5.21
50 : $5.36
1 : $5.88

195

1007079-1

TE Connectivity

CONTACT MICROPHONE CM-01 Piezo Film Sensor Type: Element Sensor Options: With Electronics Element With Electronics | Piezo Sensor | Part Number: 1007079-1 | Internal Number: 1007079-1 | TE Connectivity
RoHS : Compliant

1 : $79.16

6-1579007-0

TE Connectivity

EXTRACTION TOOL Insertion & Extraction Tool Type: Contact Extraction Insertion & Extraction Tool Application: Contact-to-Wire Contact Extraction Contact-to-Wire | Insertion And Extraction Tool | Part Number: 6-1579007-0 | Internal Number: 6-1579007-0 | TE Connectivity
RoHS : Compliant

1 : $75.0

5-1579007-0

TE Connectivity

TUBE Insertion & Extraction Tool Type: Contact Extraction Insertion & Extraction Tool Application: Contact-to-Housing Contact Extraction Contact-to-Housing | Insertion And Extraction Tool | Part Number: 5-1579007-0 | Internal Number: 5-1579007-0 | TE Connectivity
RoHS : Compliant

1 : $7.0

2007093-1

TE Connectivity

SFP+ EMI Shielded1x4 CageAssm/Light pipe Pluggable Form Factor: SFP+ Pluggable I/O Product Type: Cage Assembly Sealable: Yes Circuit Application: Signal Operating Temperature Range: -55 – 105 °C SFP+ Cage Assembly | High Speed I/o | Part Number: 2007093-1 | Internal Number: 2007093-1 | TE Connectivity
RoHS : Compliant

1,000 : $24.82
500 : $25.53
250 : $26.32
100 : $27.2
50 : $27.99
1 : $30.72

Teledyne HiRel

M38510/00701BAA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00701BDA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00701BBA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

M38510/00701BCA

Teledyne HiRel

EXCLUSIVE-OR GATE, QUAD 2-INPUT
RoHS : Not Compliant

Vyrian

TMS416100-70DGA

Texas Instruments

Fast Page DRAM, 16MX1, 70ns, CMOS, PDSO24
RoHS : Not Compliant

8,579

M38510/07009BFA

Texas Instruments

NAND Gate, S Series, 1-Func, 13-Input, TTL, CDFP16
RoHS : Not Compliant

8,462

TMS426100-70DGA

Texas Instruments

Fast Page DRAM, 16MX1, 70ns, CMOS, PDSO24

7,231

3007042

Phoenix Contact

Modular Terminal Block, 26A, 4mm2, 1 Row(s), 2 Deck(s)
RoHS : Compliant

6,205

JM38510/00701BDB

Texas Instruments

XOR Gate, TTL/H/L Series, 4-Func, 2-Input, TTL, CDFP14

4,625

TMS417400-70DJ

Texas Instruments

Fast Page DRAM, 4MX4, 70ns, CMOS, PDSO24
RoHS : Not Compliant

4,055

JM38510/07007S22W

Texas Instruments

3,865

7600701FX

Texas Instruments

Decoder/Driver, LS Series, Inverted Output, TTL, CDFP16

3,413

TMS44400-70DM

Texas Instruments

Fast Page DRAM, 1MX4, 70ns, CMOS, PDSO20
RoHS : Not Compliant

3,371

TMS44800-70DGC

Texas Instruments

Fast Page DRAM, 512KX8, 70ns, CMOS, PDSO28
RoHS : Not Compliant

3,097

GC15007-00

Microchip Technology Inc

Variable Capacitance Diode, 1pF C(T)
RoHS : Compliant

2,764

2320-1-01-44-00-00-07-0

Mill-max Mfg

PCB Terminal

579

1200700170

Molex

Circular Connector
RoHS : Compliant

538

1007000500

Weidmueller & Kg

Circular Connector, 4 Contact(s)

507

74337-0070

Molex

Telecom and Datacom Connector, 136 Contact(s), Female, Press Fit Terminal, M2x0.4, Receptacle
RoHS : Compliant

349

Win Source Electronics

TCJB107M006R0070

Kyocera AVX Components

Polymer Tantalum Capacitors 100UF 6.3V 1210
RoHS : Compliant

850 : $0.3546
635 : $0.3955
490 : $0.4091
355 : $0.4228
230 : $0.4364
95 : $0.5319

56,000

APDS-9007-020

Broadcom Limited

Light to Current Ambient Light Sensor Analog(Current) 2.5V/3.3V/5V 6-Pin Chip LED T/R / AMBIENT LIGHT SENSOR 6CHIPLED
RoHS : Compliant

280 : $1.2218
210 : $1.3628
160 : $1.4097
120 : $1.4568
75 : $1.5038
35 : $1.8327

18,551

QCC-3007-0-68CMQFN-TR-00-0

Qualcomm

103 : $3.7731
83 : $3.9302
64 : $4.0874
45 : $4.4018
29 : $4.5591
14 : $4.8735

10,000

TCJE337M016R0070E

Kyocera AVX Components

Tantalum Capacitors - Polymer 16V 330uF 20% 2917 E SR=70mOhm Black Resi
RoHS : Compliant

119 : $2.8251
89 : $3.1511
69 : $3.2598
50 : $3.3684
33 : $3.477
14 : $4.2376

10,000

TCN4337M016R0070

Kyocera AVX Components

Conductive Polymer Solid Electrolytic Chip Capacitors Undertab Series
RoHS : Compliant

128 : $2.3459
96 : $2.6166
74 : $2.7068
54 : $2.797
35 : $2.8873
15 : $3.5188

6,817

MAAD-007086-000100

MACOM

RF ATTENUATOR 50DB 50OHM 24SOIC / RF Attenuators 50dB 0 Hz ~ 2 GHz 50 Ohms 24-SOIC (0.295", 7.50mm Width)
RoHS : Compliant

27 : $11.5236
20 : $12.8532
16 : $13.2964
11 : $13.7396
8 : $14.1828
3 : $17.2853

1,000

0070Y-R nhà phân phối

Link URL