002L-R20-R Price, nhà phân phối, Stock

Key Specifications. Waveguide Size 1 WR-75 Waveguide Size 2 WR-75 Frequency, Min 13.5 GHz Frequency, Max 15 GHz Lowband Min Rejection 40. Highpass Waveguide Filter With WR-75 Interface Operating from 13.5 GHz to 15 GHz. The PE-W75F002 is a WR-75 highpass filter with UG Cover Flanges. The pass band is 1000 MHz, or 13.5 to 15 GHz. Implementing a waveguide design, the filter has excellent rejection of 40 dB minimum at 9 GHz or about 4500 MHz from the band edge. It has a maximum insertion loss of 0.2 dB.

1 : $1,170.0
5 : $1,146.6
10 : $1,123.2
25 : $1,099.8

PE-W15CA002

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-15, Coax Connector Impedance: 50 Ohm, Coax Connector Series: 1.85mm, Coax Connector Gender: Male, Waveguide Adapter Style: Right Angle, Minimum Frequency: 50 GHz, Maximum Frequency: 65 GHz, Maximum VSWR: 1.44:1. WR-15 UG-385/U Round Cover Flange to 1.85mm Male Waveguide to Coax Adapter Operating from 50 GHz to 65 GHz. PE-W15CA002 WR-15 waveguide to coax adapter is also known as a WR-15 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR 15 to 1.85mm connector and has a male gender. Our WR-15 to 1.85mm male waveguide adapter transition has a right angle design and has a round cover flange. Pasternack right angle WR-15 to 1.85mm waveguide to coaxial cable transition / adapter has a minimum frequency of 50 GHz and a maximum frequency of 65 GHz. WR-15 waveguide to 1.85mm transition adapter to coax PE-W15CA002 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-15 waveguide adapter transition with 1.85mm interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $2,710.0
5 : $2,601.6
10 : $2,493.2

PE-W10CA002

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-10, Coax Connector Impedance: 50 Ohm, Coax Connector Series: 1.0mm, Coax Connector Gender: Male, Waveguide Adapter Style: Right Angle, Minimum Frequency: 75 GHz, Maximum Frequency: 110 GHz, Maximum VSWR: 1.9:1. WR-10 UG-387/U-Mod Round Cover Flange to 1.0mm Male Waveguide to Coax Adapter Operating from 75 GHz to 110 GHz. PE-W10CA002 WR-10 waveguide to coax adapter is also known as a WR-10 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR-10 to 1.0mm connector and has a male gender. Our WR10 to 1.0mm male waveguide adapter transition has a right angle design and has a round cover flange. Pasternack right angle WR-10 to 1.0mm waveguide to coaxial cable transition / adapter has a minimum frequency of 75 GHz and a maximum frequency of 110 GHz. WR-10 waveguide to 1.0mm transition adapter to coax PE-W10CA002 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-10 waveguide adapter transition with 1.0mm interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $6,420.0
5 : $6,163.2
10 : $5,906.4

PE33600-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male Right Angle to BNC Male Cable 24 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male right angle to BNC male cable 24 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable 24 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE33600-24, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE33600-24 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33600-24 can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable 24 inch length using RG316-DS coax.

1 : $77.09
25 : $73.24
50 : $69.38
100 : $66.3

PE3C8002-50CM

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. N Male to N Female Bulkhead Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly N male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to N female bulkhead low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8002-50CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.808-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. type N low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8002-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8002-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8002-50CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.

1 : $80.29
25 : $76.28
50 : $72.26
100 : $69.05

PE3M0022-36

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 36 inches. MIL-DTL-17 N Female Bulkhead to TNC Male Cable 36 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to TNC male cable 36 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to TNC male cable 36 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/26-0011 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and M39012/26-0011 TNC cable connection on the other. Our M39012/03-0503 type N to M39012/26-0011 TNC cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 type N to M39012/26-0011 TNC cable is a female to male coax assembly, PE3M0022-36, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to M39012/26-0011 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 N type jack to M39012/26-0011 TNC plug cable assembly PE3M0022-36 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 type N to M39012/26-0011 TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/26-0011 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0022-36 can also be used in the other direction and will be M39012/26-0011 TNC male to M39012/03-0503 N type female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/26-0011 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 N type to M39012/26-0011 TNC cable assembly for quick shipment worldwide. Variations of M39012/03-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to TNC male cable 36 inch length using M17/60-RG142 coax.

1 : $226.99
25 : $215.64
50 : $204.29

PE3M0025-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 SMA Male Right Angle to SMA Male Right Angle Cable 200 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to SMA male right angle cable 200 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to SMA male right angle cable 200 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3109 SMA to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3109 SMA cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our right angle M39012/56-3109 SMA to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3109 SMA to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0025-200CM, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3109 SMA plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3109 SMA plug to M39012/56-3109 SMA plug cable assembly PE3M0025-200CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/56-3109 SMA cable assembly is manufactured with right angle M39012/56-3109 SMA to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 12.4 GHz maximum frequency M39012/56-3109 SMA right angle male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/56-3109 SMA right angle plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3109 SMA to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/56-3109 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to SMA male right angle cable 200 cm length using M17/60-RG142 coax.

1 : $494.99
25 : $470.24
50 : $445.49

PE3MSA00235-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: JACK, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: JACK, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWCH-78-2, RF Cable Type: TWCH-78-2, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Halogen Free 3-Lug TRB Non-Insulated Bulkhead Jack to Jack for 78 Ohm TWCH-78-2, 12" Cable., Radio frequency assembly halogen free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm TWCH-78-2, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Halogen free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm TWCH-78-2, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00235-12 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00235-12 is built with TWCH-78-2 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack bulkhead to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female bulkhead to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this halogen free 3-Lug TRB non-insulated bulkhead jack to jack for 78 Ohm TWCH-78-2, 12" cable.

1 : $179.99
25 : $170.99
50 : $161.99
100 : $154.79

PE3W00222

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Bulkhead Low Loss Cable Using LMR-100 Coax., Radio frequency assembly SMA male to TNC female bulkhead low loss cable using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC female bulkhead low loss cable using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC bulkhead cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and female on end 2. PE3W00222 can also be known as a low loss SMA plug to TNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC jack cable assembly PE3W00222 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency SMA male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00222 can also be used in the other direction and will be TNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC female bulkhead low loss cable using LMR-100 coax.

PE3W00251/HS

Pasternack Enterprises

PE3W00259

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. UHF Male to BNC Male Right Angle Cable Using RG141. PE3W00259 is a UHF male to BNC male right angle cable using RG141 coax. This Pasternack UHF male to BNC male right angle cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm BNC for connector 2. UHF to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male UHF to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00259 UHF male to BNC male right angle cable assembly is constructed with RG141 coax.

PE3W00275LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-400-UF Coax, LF Solder. PE3W00275LF is a N male to TNC male cable using LMR-400-UF coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00275LF N male to TNC male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W00288-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 19.69 inches. 75 Ohm BNC Male to 75 Ohm BNC Male Right Angle Cable 50 CM Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male right angle cable 50 cm length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC male right angle cable 50 cm length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3W00288-50CM, can also be known as a BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W00288-50CM is built with RG59 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00288-50CM can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male right angle cable 50 cm length using 75 Ohm RG59 coax.

1 : $136.99
25 : $130.14
50 : $123.29
100 : $117.81

Relay Specialties

MSM03002-ON

BlockMaster Blocks

PCB Terminal Block; 3-position 10.00mm; PCB Mount; 17.5A 600V; 30-12AWG; Modular; Black

1 : $1.3
10 : $1.28
25 : $1.27
50 : $1.25
100 : $1.24

525

MC200-50002

BlockMaster Blocks

PCB Terminal Block; 2-position 5.00mm; Green

1 : $1.64
10 : $1.62
25 : $1.6
50 : $1.58
100 : $1.56

385

PA002-02P

BlockMaster Blocks

PCB Terminal Block; 2-position 5.00mm; PCB Mount; 90° Entry WP; Blue

1 : $0.25
10 : $0.24
25 : $0.23
500 : $0.21
1,000 : $0.2

295

9002-12-10

Coto Technology USA

Reed Relay, SIP 6-Pin, Mount 12 VDC, 1A SPST-NO ES Shield: N/A, RF Shield: Yes
RoHS : Compliant

1 : $4.45

109

MD022-50024

BlockMaster Blocks

Terminal Block Header; 24-pos 5.00mm; THT; Black

1 : $2.56
10 : $2.52
25 : $2.49
50 : $2.46
100 : $2.43

OTB-60-02P-C

BlockMaster Blocks

Barrier Terminal Block; 2-pos 0.300"; Black; Cover

1 : $10.16
10 : $9.86
25 : $9.58
50 : $9.31
100 : $9.06

MC210-50002

BlockMaster Blocks

PCB Terminal Block; 2-position 5.00mm; Green

1 : $1.57
10 : $1.55
25 : $1.53
50 : $1.51
100 : $1.49

2EDGK-5.0-02P-13

BlockMaster Blocks

PCB Terminal Block; 2-position 5.00mm; Black

1 : $7.53
10 : $7.43
25 : $7.33
50 : $7.24
100 : $7.15

90.02

FINDER SpA

Relay Socket; 60.12 Relays 8-pos; Screw Terminal DIN Rail; 90 Series; 10A; Blue
RoHS : Compliant

1 : $7.54
5 : $7.26
10 : $6.76
25 : $6.32

G7L-2A-TUB-J-CB-AC200/240

OMRON Corporation

Power Relay, 240 VAC 25 Amps, DPST-NO (2 Form A) Chassis Mount, Non Latching

1 : $15.77
5 : $15.19
10 : $14.14
25 : $13.23
50 : $12.42

50-002-15

TE Connectivity

Switch Lens; White Rectangular; Flat

1 : $1.61
10 : $1.35

EB600-29693

NAMCO

NAMCO SL-42/DC-PUSH B-SIDE MTG

1 : $1,823.45
5 : $1,755.91
10 : $1,634.81

2200-2302

Coto Technology USA

Reed Relay, PC Board, Mounting 5 VDC, 1A SPST-NO ES Shield: No, RF Shield: Yes

1 : $7.85

G7L-1A-TUB-J-CB-AC200/240

OMRON Corporation

Power Relay, 240 VAC 30 Amps, SPST-NO (1 Form A) Chassis Mount, Non Latching

1 : $13.85
5 : $13.33
10 : $12.41

P0700-21

Littelfuse Inc

SSAC* KNOB (KM1) USE WITH P100

1 : $10.59
5 : $10.25
10 : $9.93
25 : $9.63
50 : $7.94

TE Connectivity

0026A0024-9X

TE Connectivity

0026A0024-9X Cable Type: Cheminax Impedance: 100 Ω Wire Size: 26 AWG Operating Temperature Range: -65 – 200 °C Operating Temperature Range: -85 – 392 °F Cheminax 100 Ω | 26 AWG | TE Connectivity
RoHS : Compliant

1 : $5.77

16,085

0460-002-1631

TE Connectivity

PIN, SOLID, SIZE 16, 16-18AWG, PD/NI/AU Terminal Type: Pin Wire Size: 16 – 18 AWG Wire Size: .75 – 1.5 mm² Interface Plating: Palladium Nickel (PdNi) Primary Locking Feature: Integrated in Housing Pin 16 – 18 AWG .75 – 1.5 mm² Palladium Nickel (PdNi) | TE Connectivity
RoHS : Compliant

1 : $1.58

13,966

1-1825002-4

TE Connectivity

ADF08T04=DIP SWT,FLUSH,THRU/HL DIP & SIP Switch Type: DIP Switch Contact Plating Material: Gold Flash Case Color: Black Case Material: Polyphenylene Sulfide (PPS) Sealed Device: Yes DIP Gold Flash Black Polyphenylene Sulfide (PPS) | TE Connectivity
RoHS : Compliant

2,500 : $2.89
1,000 : $2.97
500 : $3.04
250 : $3.12
100 : $3.2
50 : $3.28
25 : $3.36
10 : $3.43
1 : $3.51

9,025

1-1318300-2

TE Connectivity

3.96 EP HDR ASSY 2P NAT/TUBE PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 2 Number of Rows: 1 PCB Mount Header Vertical Wire-to-Board 2 | Ampseal Header | TE Connectivity
RoHS : Compliant

1,000 : $0.21
100 : $0.28
10 : $0.34
1 : $0.45

4,292

1-1825002-3

TE Connectivity

ADF0804=DIP SWT,FLUSH,THRU/HL DIP & SIP Switch Type: DIP Switch Contact Plating Material: Gold Flash Case Color: Black Case Material: Polyphenylene Sulfide (PPS) Sealed Device: No DIP Gold Flash Black Polyphenylene Sulfide (PPS) | TE Connectivity
RoHS : Compliant

2,500 : $2.5
1,000 : $2.56
500 : $2.63
250 : $2.7
100 : $2.77
50 : $2.83
25 : $2.9
10 : $2.97
1 : $3.04

2,928

1-1825002-7

TE Connectivity

ADF1004=DIP SWT,FLUSH,THRU/HL DIP & SIP Switch Type: DIP Switch Contact Plating Material: Gold Flash Case Color: Black Case Material: Polyphenylene Sulfide (PPS) Sealed Device: No DIP Gold Flash Black Polyphenylene Sulfide (PPS) | TE Connectivity
RoHS : Compliant

2,500 : $2.79
1,000 : $2.87
500 : $2.95
250 : $3.02
100 : $3.1
50 : $3.17
25 : $3.25
10 : $3.32
1 : $3.4

2,244

1-2199300-2

TE Connectivity

32P,DIP SKT,600 CL,OTC,PB FREE Contact Fabrication: Stamped & Formed Number of Positions: 32 Connector Profile: Standard Row-to-Row Spacing: .6 in Row-to-Row Spacing: 15.24 mm Stamped & Formed 32 Standard .6" | TE Connectivity
RoHS : Compliant

1,000 : $0.72
500 : $0.74
250 : $0.76
100 : $0.78
50 : $0.81
1 : $0.89

1,578

0024G0024-9X

TE Connectivity

0024G0024-9X Cable Type: Cheminax Impedance: 100 Ω Wire Size: 24 AWG Operating Temperature Range: -65 – 200 °C Operating Temperature Range: -85 – 392 °F Cheminax 100 Ω | 24 AWG | TE Connectivity
RoHS : Compliant

1 : $7.25

1,267

1-1002608-0-M

TE Connectivity

DT1-028K N/TH N/HOLE Piezo Film Sensor Type: Element Sensor Options: Strips Element Strips | TE Connectivity
RoHS : Compliant

1 : $6.35

977

1-1002910-0-M

TE Connectivity

LDT1-028K W/TH LEADS/RIVE Piezo Film Sensor Type: Element Sensor Options: Laminated Strips Leads Element Laminated | TE Connectivity
RoHS : Compliant

1 : $12.0

876

1-1002785-1-M

TE Connectivity

FDT1-028K W/MALE CONN W/O ADH Piezo Film Sensor Type: Element Sensor Options: Strips Leads Element Strips | TE Connectivity
RoHS : Compliant

1 : $15.88

331

1-1000288-0-M

TE Connectivity

SDT1-028K Piezo Film Sensor Type: Element Sensor Options: Shielded Strips Leads Element Shielded | TE Connectivity
RoHS : Compliant

1 : $48.53

U5254-000002-002BA

TE Connectivity

PRESS XDCR U5254-000002-002BA Pressure Sensor Type: Industrial Pressure Transducer Pressure Type: Absolute Output Signal Details: 4 – 20 mA Pressure: 29 psi Pressure: 2 bar Industrial Pressure Transducer Absolute 4 – 20 mA 29 psi | TE Connectivity
RoHS : Compliant

1 : $238.22

U5354-000002-002BA

TE Connectivity

PRESS XDCR U5354-000002-002BA Pressure Sensor Type: Industrial Pressure Transducer Pressure Type: Absolute Output Signal Details: 4 – 20 mA Pressure: 29 psi Pressure: 2 bar Industrial Pressure Transducer Absolute 4 – 20 mA 29 psi | TE Connectivity
RoHS : Compliant

1 : $528.71

M5244-000002-350BG

TE Connectivity

PRESS XDCR M5244-000002-350BG Pressure Sensor Type: Industrial Pressure Transducer Pressure Type: Gauge Output Signal Details: 1 – 5 V Pressure: 5076.32 psi Pressure: 350 bar Industrial Pressure Transducer Gauge 1 – 5 V 5076.32 psi | TE Connectivity
RoHS : Compliant

1 : $186.65