| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
0-427... nhà phân phối |
| nhà phân phối | tên linh kiện | nhà sản xuất | Giải thích chi tiết về linh kiện | Price | Qty. BuyNow | |
![]() Avnet Americas | 43650-0427 | Molex | - Trays (Alt: 0436500427) RoHS : Compliant |
| 790 | |
| 3-640427-6 | TE Connectivity | Conn IDC Connector F 6 POS 3.96mm IDT RA Cable Mount - Bag (Alt: 3-640427-6) RoHS : Compliant |
| 328 | ||
| 3-640427-4 | TE Connectivity | Conn IDC Receptacle 4 POS 3.96mm IDT RA Cable Mount - Bulk (Alt: 3-640427-4) RoHS : Compliant |
| 20 | ||
| 1104275-01 | Seagate Technology | DDIC FRU 3.5"" 0.7-DWPD 12G SAS ENCRYPTED - Boxed Product (Development Kits) (Alt: 1104275-01) RoHS : Not Compliant | 0 | |||
| 10-427405-197 | Amphenol Corporation | - Bulk (Alt: 10-427405-197) RoHS : Not Compliant |
| 0 | ||
| 10-427406-21G | Amphenol Corporation | - Bulk (Alt: 10-427406-21G) RoHS : Not Compliant |
| 0 | ||
| 10-427950-099 | Amphenol Corporation | - Bulk (Alt: 10-427950-099) RoHS : Not Compliant |
| 0 | ||
| 3-644042-7 | TE Connectivity | - Bag (Alt: 3-644042-7) RoHS : Compliant |
| 0 | ||
| R110427820 | Radiall | - Tape and Reel (Alt: R110427820) RoHS : Not Compliant |
| 0 | ||
| BZW04-273B | Taiwan Semiconductor | Diode TVS Single Bi-Directional 273V 400W 2-Pin DO-204AL T/R - Tape and Reel (Alt: BZW04-273B) RoHS : Compliant |
| 0 | ||
| BZW04-273B R0 | Taiwan Semiconductor | Diode TVS Single Bi-Dir 273V 400W 2-Pin DO-204AL Paper T/R - Tape and Reel (Alt: BZW04-273B R0) RoHS : Compliant | 0 | |||
| BFC237590427 | Vishay Intertechnologies | Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 0.012 uF, ? 5%, Through Hole, 400 V, 1 kV - Bulk (Alt: BFC237590427) RoHS : Compliant |
| 0 | ||
| HTSW-104-27-F-S-RE | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 1 Rows, 4 Contacts, Through Hole, HTSW Series - Bulk (Alt: HTSW-104-27-F-S-RE) RoHS : Compliant |
| 0 | ||
| 2057042-7 | TE Connectivity | - Bulk (Alt: 2057042-7) RoHS : Compliant |
| 0 | ||
| 10-427405-135 | Amphenol Corporation | - Bulk (Alt: 10-427405-135) RoHS : Not Compliant |
| 0 | ||
![]() Newark | 3-640427-4 | TE Connectivity | Housing, 20Awg, 4Way; |Te Connectivity Amp 3-640427-4 RoHS : Compliant |
| 10,780 | |
| 3-640427-4 | TE Connectivity | Con, Idc, Idc Receptacle, Female, 3.96Mm; |Te Connectivity Amp 3-640427-4 RoHS : Compliant |
| 1,536 | ||
| 504275-E | TE Connectivity | Conn, R/A Plug, 6Pos, 1Row, 1.27Mm, Smt; |Te Connectivity Erni 504275-E RoHS : Compliant |
| 1,144 | ||
| 33500427 | Aptiv PLC | Automotive Housing, Plug, 24Pos; |Aptiv/delphi 33500427 RoHS : Compliant |
| 240 | ||
| MP780427 | SPC Multicomp | Usb Tester, Type C, 4-24Vdc, 3A; Voltage Measuring Range Ac:-; Meter Display Type:-; Operating Temperature Min:-; Operating Temperature Max:-; Product Range:-; Plug Type:- Rohs Compliant: Yes |Multicomp Pro MP780427 RoHS : Compliant |
| 213 | ||
| 923.000.005.000.427 | ODU Steckverbindungssysteme Gmbh & Co Kg | Circular Connector Contact, #16; |Odu-Usa 923.000.005.000.427 RoHS : Compliant |
| 25 | ||
| B33-120-427 | Brady Worldwide Inc | Blank Labels; |Brady B33-120-427 RoHS : Not Compliant |
| 22 | ||
19300240427![]() | HARTING Technology Group | Hood, Top Entry, 24B, M32, 2 Lever; Heavy Duty Connector Type:Hood, Top Entry; Connector Body Material:Aluminum Body; Locking Type:2 Lever; Rectangular Shell Size:24B; For Use With:Harting Han 24B Inserts & Modules Rohs Compliant: Yes |Harting 19300240427 RoHS : Compliant |
| 18 | ||
| AX104271 | Belden Inc | Brilliance Precision Kit; |Belden AX104271 RoHS : Not Compliant |
| 9 | ||
| 19628240427 | HARTING Technology Group | Heavy Duty Conn, 2 Lever, Size 24B; Heavy Duty Connector Type:Hood, Top Entry; Connector Body Material:Aluminum Body; Locking Type:2 Lever; Rectangular Shell Size:24B; Product Range:Han Emc/B, High Temp Series Rohs Compliant: Yes |Harting 19628240427 RoHS : Compliant |
| 7 | ||
| M21-750-427 | Brady Worldwide Inc | Label Printer Tape, 4.3M X 19Mm; |Brady M21-750-427 RoHS : Not Compliant |
| 5 | ||
| M21-1000-427. | Brady Worldwide Inc | Label, Self-Lam, Vinyl, 25.4Mm, 4.26M; |Brady M21-1000-427. RoHS : Compliant |
| 3 | ||
| M21-750-427 | L-com Inc | Lbl 0.75"w X 14H Wht; |L-Com M21-750-427 RoHS : Not Compliant |
| 3 | ||
| PEL00427 | Pro Elec | Power Strip, 4 Outlet, 13A, 240V, 10M; |Pro Elec PEL00427 RoHS : Compliant |
| 1 | ||
| AMER40-4275Z | Aimtec | Led Driver, Constant Current, 31.5W; Available Until Stocks Are Exhausted |Aimtec AMER40-4275Z RoHS : Compliant |
| 1 | ||
![]() RS | 3-640427-4 | TE Connectivity | CONNECTOR RECEPTACLE 4 IDC STANDARD LOCKING RAMP 90 DEG NYLON 0.156 IN. RoHS : Compliant |
| 789 | |
| 15166-0427 (151660427) | Molex | 40 WAY FLAT RIBBON CABLE, 0.051M, SERIES PREMO-FLEX |
| 145 | ||
| 1750427 | RS Pro | THREAD INSERTS M12 X 1,75 1.5MM (PK 5) |
| 75 | ||
| 19628240427 | HARTING Technology Group | CONNECTOR, POWER, HEAVY DUTY, METAL HOOD HAN 24B 2 LVR LCKING RoHS : Compliant |
| 7 | ||
| 05042765001 (042765) | Wera Werk Hermann Werner GmbH & Co. KG | 784 B/2 ADAPTER QUICK RELEASE CHUCK |
| 6 | ||
| M4-90-427 | Brady Worldwide Inc | SELF-LAMINATING VINYL WIRE LABELS, 1.5"H X 0.5"W, CLEAR/WHITE |
| 5 | ||
| 50X90X8TC-BX (0075042723) | Dichtomatik | OIL SEAL, 50MM ID, 90MM OD, 8MM WIDTH, NB70C401 MATERIAL |
| 5 | ||
| 05042755001 (042755) | Wera Werk Hermann Werner GmbH & Co. KG | 784 B/1 ADAPTER QUICK RELEASE CHUCK |
| 4 | ||
| 120066-0427 | Woodhead Molex | MICRO-CHANGE (M12) DOUBLE-ENDED CORDSET 5 POLES |
| 2 | ||
| 2042745 | RS Pro | RECHARGEABLE BATTERY PACK 10 CELL 6V 8AH SIZE D NICD TAG TERMINALS |
| 1 | ||
| 1042734 | Phoenix Contact | FL WLAN ACCESS POINT WITH FL MGUARD RS200 SECURITY ROUTER;KIT |
| 1 | ||
| 19307160427 | HARTING Technology Group | HAN B HOOD TOP ENTRY HC M32 BLACK RoHS : Compliant |
| 1 | ||
| 60406RL (60427-0) | Klein Tools Inc | HARD HAT, NON-VENTED, FULL BRIM WITH RECHARGEABLE HEADLAMP, WHITE |
| 1 | ||
| M4C-750-427 (170740) | Brady Worldwide Inc | SELF-LAMINATING VINYL WIRE LABELS, .75"W X 25L, BLACK ON WHITE |
| 1 | ||
| BES0427 (BES M08EE-PSC25B-S49G) | Balluff Inc | PROXIMITY SENSOR, BES M08EE-PSC25B-S49G |
| 1 | ||
![]() Bisco Industries | MS20427F4-4 | RISCO Inc | 55,919 | |||
| MS20427F4-4 | MS Rivets | 24,906 | ||||
| 4518-0-15-15-04-27-04-0 | Mill-Max Mfg Corp | RoHS : Compliant | 5,850 | |||
| MS20427-3C5 | RISCO Inc | 3,517 | ||||
| MS20427-3C8 | RISCO Inc | 2,830 | ||||
| MS20427M3C5 | MS Rivets | 2,401 | ||||
| MS20427M3C5 | Ateliers de la Haute-Garonne | 430 | ||||
| MS20427M3-4-5 | MS Rivets | 379 | ||||
| MS20427-2C2 | MS Rivets | 225 | ||||
| MS20427M5-6 | RISCO Inc | 160 | ||||
| MS20427F5-5 | MS Rivets | 61 | ||||
| MS20427M6-5 | MS Rivets | 50 | ||||
| MS20427-4C6 | MS Rivets | 50 | ||||
| MS20427M6-7 | MS Rivets | 25 | ||||
| MS20427M3-12 | MS Rivets | 1 | ||||
![]() Onlinecomponents.com | 54-427-0 | Mode Electronics | 3MM FLAT WASHER RoHS : Compliant |
| 0 | |
| 57-427-0 | Mode Electronics | RoHS : Compliant |
| 0 | ||
![]() Sager | 3-640427-4 | TE Connectivity | Headers & Wire Housings CLOSED W/O TABS 4P L.R. yellow 20 AWG RoHS : Compliant |
| 0 | |
| 3-644042-7 | TE Connectivity | Headers & Wire Housings 07P MTA100 CONN ASSY LF RoHS : Compliant |
| 0 | ||
| 3042735 | Phoenix Contact | DIN Rail Terminal Blocks ST 4/ 2P RoHS : Compliant |
| 0 | ||
| 3042780 | Phoenix Contact | DIN Rail Terminal Blocks SP 4/1-M RoHS : Compliant |
| 0 | ||
| 4-640427-9 | TE Connectivity | Headers & Wire Housings 19P MTA156 CONN ASSY 20AWG YEL RoHS : Compliant | 0 | |||
| 0439-0-15-15-04-27-04-0 | Mill-Max Mfg Corp | STANDARD I.C. RECEPTACLE RoHS : Compliant |
| 0 | ||
| 0011404273 | Molex | Other Tools 8331-7 WIRE STOP |
| 0 | ||
| 0382400427 | Molex | Barrier Terminal Blocks | 0 | |||
| HTSW-104-27-F-S | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| HTSW-104-27-F-S-RE | Samtec Inc | Headers & Wire Housings High Temperature PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 0 | ||
| MTSW-104-27-G-D-100 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-104-27-L-S-430 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-104-27-T-T-1140 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 0387700427 | Molex | Barrier Terminal Blocks CB BTS ET 27 ASY | 0 | |||
| 0114042700 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding CSTR,STR,Ni,CM | 0 | |||
![]() TME | 1768042-7 | TE Connectivity | Marker: cable; Marking: U; 1.397÷1.803mm; POM; yellow; STD RoHS : Compliant |
| 1,500 | |
| 2600042-7 | TE Connectivity | Connector: wire-wire; male,female; Automotive; PIN: 12; for cable RoHS : Compliant |
| 1,500 | ||
| 8042705 | Bossard Group | Screw; M3; M3x20; 0.5; Head: hexagonal; polyamide; DIN 933 |
| 1,100 | ||
| 350427-1 | TE Connectivity | Connector: wire-board; male,female; Automotive; 12A; 250V; PIN: 16 RoHS : Compliant |
| 391 | ||
| 173112-0427 | Molex | Screw; D-Sub |
| 159 | ||
| 1Y042715 | celduc relais | Relays accessories: plug-in connector; Leads: screw; PIN: 4; SOB |
| 46 | ||
| 109-0427 | Antistat | Protective gloves; Size: XL; ESD; white,grey |
| 7 | ||
| 10042724 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 2; THT; 1.5A; 60V |
| 0 | ||
| 10042765 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 4; SMT; 3A; 150V |
| 0 | ||
| 1350427 | Phoenix Contact | Splice terminal: rail; PA; terminals: 2; W: 8.2mm; H: 82mm; Body: red RoHS : Compliant |
| 0 | ||
| 15620042701000 | HARTING Technology Group | Connector: PCB to PCB; socket; female; data; PIN: 4; straight; THT RoHS : Compliant |
| 0 | ||
| 4-640427-0 | TE Connectivity | Connector: wire-board; plug; female; data; MTA-156; PIN: 10; 3.96mm RoHS : Compliant |
| 0 | ||
| 10042725 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 4; THT; 1.5A; 60V |
| 0 | ||
| 10042766 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 5; SMT; 3A; 150V |
| 0 | ||
| 10042770 | Fischer Elektronik GmbH & Co KG | Connector: pin strips; socket; female; data; PIN: 7; SMT; 3A; 150V |
| 0 | ||
![]() ComSIT USA | BZG0427TR | Vishay Intertechnologies | ZENER DIODE WITH SURGE CURRENT SPECIFICATION Trans Voltage Suppressor Diode, 300W, 27V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AC RoHS : Compliant | 6,000 | ||
| SAKC167CR16RMB04275 | Infineon Technologies AG | 16-BIT SINGLE-CHIP MICROCONTROLLER Microcontroller, 16-Bit, MROM, 80166 CPU, 25MHz, CMOS, PQFP144 RoHS : Compliant | 1,000 | |||
| XC304270TQ100C | AMD Xilinx | FPGAs XC3000 30784b 4.25V 82 I/O 100-QFP RoHS : Not Compliant | 167 | |||
| ATT304270J100I | AT&T | FIELD-PROGRAMMABLE GATE ARRAY Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, 144-Cell, CMOS, PQFP100 RoHS : Not Compliant | 91 | |||
| XC304270PC84C | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, 144-Cell, CMOS, PQCC84 RoHS : Not Compliant | 75 | |||
| XC304270PC84C(SOCKET PULLS) | AMD Xilinx | Electronic Component RoHS : Not Compliant | 52 | |||
| BVEI3042757 | hahn | Electronic Component RoHS : Compliant | 50 | |||
| BVEI3042751 | hahn | Electronic Component RoHS : Compliant | 29 | |||
| XC304270PG132M | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, 144-Cell, CMOS, CPGA132 RoHS : Not Compliant | 2 | |||
![]() Interstate Connecting Components | 3-644042-7 | TE Connectivity | 07P MTA100 CONN ASSY LF RoHS : Compliant |
| 500 | |
19300240427![]() | HARTING Technology Group | HAN B HOOD TOP ENTRY HC M32 RoHS : Compliant |
| 247 | ||
| 2CMA100427R1000 | Amphenol Tuchel | IP&S PL STR RED 4P5W 100A UL/CSA ABB100P7W |
| 150 | ||
| 0439-0-15-15-04-27-04-0 | Mill-Max Mfg Corp | MMX0439-0-15-15-04-27-04-0 RoHS : Compliant |
| 17 | ||
| 11-40-4274 | Molex | 8331-8 PRESSURE PAD * |
| 1 | ||
| 10-427406-21G | Amphenol Aerospace | 0 | ||||
| 2CMA100427R1000 | Amphenol Sine Systems | ABB5100P7W INDUSTRIAL PLUG ULC | 0 | |||
| 10-427406-099 | Amphenol Aerospace | DUST CAP | 0 | |||
| 10-427499-151 | Amphenol Aerospace | 38999 GASKET | 0 | |||
| 504275-E | TE Connectivity | RoHS : Compliant |
| 0 | ||
| RJFSFTP5E0427 | Amphenol PCD | RJ FIELD CORDSET CAT5E W RJ45 | 0 | |||
| 10-427950-09G | Amphenol Aerospace | PROTECTIVE CAP | 0 | |||
| 1-1735042-7 | TE Connectivity | 1MM FFC SMT V ASSY 17P EMBOSS RoHS : Compliant | 0 | |||
| 2150427-2 | TE Connectivity | OCEAN_2.0_APPLICATOR-E-110F140 |
| 0 | ||
| 43-10427 | Conec Corporation | SAL-12-RKW4-3L-10A1 RoHS : Compliant | 0 | |||
![]() NexGen Digital | ATT3042-70J100I | Legerity | 15 | |||
XC3042-70PQ100I![]() | AMD Xilinx | RoHS : Not Compliant | 7 | |||
![]() PEI Genesis | 10-427499-231 | Amphenol Corporation |
| 0 | ||
| 10-427950-25G | Amphenol Corporation |
| 0 | |||
| 10-427950-17G | Amphenol Corporation |
| 0 | |||
| 10-427406-219 | Amphenol Corporation |
| 0 | |||
| 10-427406-137 | Amphenol Corporation |
| 0 | |||
| 201042700 | Amphenol PCD |
| 0 | |||
| 1204271-9 | SOURIAU-SUNBANK |
| 0 | |||
| 10-427499-251 | Amphenol Corporation |
| 0 | |||
| 201042703 | Amphenol PCD |
| 0 | |||
| 7300427 | SOURIAU-SUNBANK |
| 0 | |||
| 50-427-3188-220 | ITT Interconnect Solutions |
| 0 | |||
| 60-042728-22S | Amphenol Corporation |
| 0 | |||
| 60-042722-23S | Amphenol Corporation |
| 0 | |||
| 40A30304-27 | SOURIAU-SUNBANK |
| 0 | |||
| 10-427406-177 | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | 4-640427-6 | TE Connectivity | 16P MTA156 CONN ASSY 20AWG YEL RoHS : Compliant |
| 1,980 | |
| TSW-104-27-L-S | Samtec Inc | Classic PCB Header Strips, 0.100" pitch RoHS : Compliant |
| 898 | ||
| 640427-5 | TE Connectivity | Connectors RoHS : Not Compliant |
| 455 | ||
| 9-50427-1 | TE Connectivity | TE COMPONENT 9-50427-1 RoHS : Compliant |
| 369 | ||
| 6304-279-1702 | TE Connectivity | DEUTSCH CONNECTOR 6304-279-1702 |
| 182 | ||
| 2204273-2 | TE Connectivity | I/O Connectors RoHS : Compliant |
| 31 | ||
| 53K504-272N5 | Rosenberger | RF Component RoHS : Compliant |
| 20 | ||
19300240427![]() | HARTING Technology Group | Han B Hood Top Entry HC M32 RoHS : Compliant |
| 17 | ||
| 09200042733 | HARTING Technology Group | Han 4A-F-QL RoHS : Compliant |
| 17 | ||
| RJFSFTP5E0427 | Amphenol PCD | CABLE CAT5E RJ45 PLUG- 4.27M |
| 15 | ||
| 60-042722-04S | Amphenol Corporation | CONNECTOR |
| 15 | ||
| DS04-27S-059 | TE Connectivity | RECP ASSY |
| 10 | ||
| 40427001 | Hartmann Electronic | AERO RELAY/CONTACTOR 40427001 |
| 4 | ||
| 4-640427-3 | TE Connectivity | Headers & Wire Housings RoHS : Compliant |
| 1 | ||
| AAB0427-00 | TE Connectivity | backshells, |
| 1 | ||
![]() Richardson RFPD | SI5338C-B04275-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 200MHz-OUT 24-Pi RoHS : Compliant | 0 | ||
| 904-27-2-28-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| BLP0427M9S20XY | Ampleon | BLP0427M9S20/SOT1482/TO270 RoHS : Not Compliant |
| 0 | ||
| BLP0427M9S20XY | RF POWER TRANSISTOR RoHS : Compliant | 0 | ||||
| SA204271F35HAR | CTS Corporation | OSCILLATOR CRYSTAL RoHS : Compliant |
| 0 | ||
| 904-27-1-23-2-B-0 | Wakefield-Vette | Elliptical Fin Heat Sink RoHS : Compliant | 0 | |||
| 904-27-2-21-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| 935246520427-T3T | Murata Manufacturing Co Ltd | Wire Bondable Vertical SiCap RoHS : Compliant | 0 | |||
| 904-27-1-28-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| 904-27-1-12-2-B-0 | Wakefield-Vette | Elliptical Fin Heat Sink RoHS : Compliant | 0 | |||
| 904-27-2-33-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
| SI5395P-A10427-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 644.53125MHz RoHS : Compliant | 0 | |||
| SI5395P-A10427-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 644.53125MHz RoHS : Compliant | 0 | |||
| 904-27-2-23-2-B-0 | Wakefield-Vette | Pin Fin Heat Sink RoHS : Compliant | 0 | |||
| 904-27-1-21-2-B-0 | Wakefield-Vette | BOARDLEVEL HEAT SINK RoHS : Compliant | 0 | |||
![]() Rutronik | Q65115A0427 | ams OSRAM Group | TOPLED E1608 ORANGE RoHS : Compliant |
| 100 | |
![]() Chip 1 Exchange | SMM0204 27 KOHM TK 50 | INSTOCK | 2,098 | |||
| MM204 27K | INSTOCK | 1,450 | ||||
| ATT304270M84TR | INSTOCK | 200 | ||||
| TSB1-04271-09T3 | INSTOCK | 116 | ||||
| ATT3042-70J100I | Legerity | INSTOCK | 115 | |||
| 43045-0427 | Molex | INSTOCK RoHS : Compliant | 106 | |||
| XC3042-70PC84C | INSTOCK | 87 | ||||
| 932204272682 | TDK Electronics | INSTOCK | 60 | |||
| ATT304270J100-DB | LSI Corporation | INSTOCK | 60 | |||
| MS20427M3-4 | INSTOCK | 50 | ||||
| A404273-12 | INSTOCK | 22 | ||||
| 104275.ETZ AUSG. 1B 05.12.19 | Atech OEM Inc | INSTOCK | 17 | |||
| XC3042-70 | AMD Xilinx | INSTOCK | 15 | |||
XC3042-70PC84C![]() | AMD Xilinx | INSTOCK RoHS : Not Compliant | 13 | |||
| 104273.ETZ 1B 10.07.2015 | INSTOCK | 9 | ||||
![]() Avnet Abacus | 430450427 | Molex | (Alt: 430450427) RoHS : Compliant | 26,970 | ||
| 1462042-7 | TE Connectivity | Relay Signal SPDTCO 250VAC 5VDC Through Hole (Alt: 1462042-7) RoHS : Compliant | 2,000 | |||
| 3-640427-2 | TE Connectivity | Conn IDC Connector F 2 POS 396mm IDT RA Cable Mount (Alt: 3-640427-2) RoHS : Compliant | 1,000 | |||
| 3-640427-4 | TE Connectivity | Conn IDC Receptacle 4 POS 396mm IDT RA Cable Mount (Alt: 3-640427-4) RoHS : Compliant | 750 | |||
| 504275-E | TE Connectivity | Pin Header WiretoBoard 127 mm 1 Rows 6 Contacts Surface Mount Right Angle (Alt: 504275-E) RoHS : Compliant | 0 | |||
| 180427-2 | TE Connectivity | 187 FASTON TAB 01P (Alt: 180427-2) RoHS : Not Compliant | 0 | |||
| 3-640427-4 | TE Connectivity | Conn IDC Receptacle 4 POS 396mm IDT RA Cable Mount (Alt: 3-640427-4) RoHS : Compliant | 0 | |||
| 4-640427-9 | TE Connectivity | Conn IDC Connector F 19 POS 396mm IDT RA Cable Mount (Alt: 4-640427-9) RoHS : Compliant | 0 | |||
| 1-640427-8 | TE Connectivity | Conn IDC Connector F 18 POS 396mm IDT RA Cable Mount (Alt: 1-640427-8) RoHS : Not Compliant | 0 | |||
| 3-644042-7 | TE Connectivity | Conn IDC Connector F 7 POS 254mm IDT RA Cable Mount Loose Piece (Alt: 3-644042-7) RoHS : Compliant | 0 | |||
| 2057042-7 | TE Connectivity | (Alt: 2057042-7) RoHS : Compliant | 0 | |||
| 150150427 | Molex | (Alt: 150150427) RoHS : Compliant | 0 | |||
| 150150427 | Molex | (Alt: 150150427) RoHS : Compliant | 0 | |||
| MAL204271688E3 | Vishay Intertechnologies | 68uF 450V 125x30 85C 20000h (Alt: MAL204271688E3) RoHS : Compliant | 0 | |||
| HTSW-104-27-F-S-RE | Samtec Inc | Pin Header BoardtoBoard WiretoBoard 1 Rows 4 Contacts Through Hole HTSW Series (Alt: HTSW-104-27-F-S-RE) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 504275-E | TE Connectivity | (Alt: 504275-E) RoHS : Compliant | 0 | ||
| BLP0427M9S20GZ | Ampleon | (Alt: BLP0427M9S20GZ) RoHS : Compliant | 0 | |||
| X1G004271003311 | Epson Electronics America Inc | (Alt: X1G004271003311) RoHS : Compliant | 0 | |||
| 61083-042702LF | Amphenol Corporation | Connector Stacking Plug 40 Position 0.8mm Solder 5.7mm Stack Height Straight Surface Mount (Alt: 61083-042702LF) RoHS : Compliant | 0 | |||
| AC-HA042752 | Amphenol Corporation | (Alt: AC-HA042752) RoHS : Compliant | 0 | |||
| X1G004271001200 | Epson Electronics America Inc | (Alt: X1G004271001200) RoHS : Compliant | 0 | |||
| X1G005601042700 | Epson Electronics America Inc | SG-8018CG 27.120000 MHZ TJHSB (Alt: X1G005601042700) RoHS : Compliant | 0 | |||
| 0152670427 | Molex | Ribbon Cable, 26 Conductors, 1mm, 102mm L, 1.2A, 60V, Premo-Flex 15267 Series, Same Side (Alt: 0152670427) RoHS : Compliant | 0 | |||
| 1462042-7 | TE Connectivity | Relay Signal SPDT-CO 250VAC 5VDC Through Hole (Alt: 1462042-7) RoHS : Compliant | 0 | |||
| 0430450427 | Molex | Pin Header, 4 Contacts, 2 Rows, 3mm, Matte Tin, 8.5A, Straight, Shrouded, Brass Alloy, Wire-to-Board (Alt: 0430450427) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FL2500427 | Diodes Incorporated | (Alt: FL2500427) RoHS : Compliant | 0 | ||
| DTR0000427494 | Sanmina Corporation | (Alt: DTR0000427494 (ALS)) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMER40-4275Z | Aimtec | RoHS : Compliant |
| 0 | |
| AMEPR30-4270Z | Aimtec | RoHS : Compliant |
| 0 | ||
AIUR-04-272J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-271J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| ASPI-0504-270M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-0504-270K-T![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
AIUR-04-273J![]() | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMEHR50-4270Z | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Component Electronics, Inc | 8230-4272 | Sumitomo Wiring Systems LTD | IN STOCK SHIP TODAY | 4,800 | ||
| ACVX-1220-42.7309M | Abracon Corporation | IN STOCK SHIP TODAY | 2,200 | |||
| 640427-2 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,000 | ||
| 2-640427-0 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Not Compliant | 1,000 | |||
| 204274-1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 500 | |||
| MKP4.16.15.04.27 | DUCATI Energia Spa | IN STOCK SHIP TODAY |
| 73 | ||
| 300427125 | FASTRON GmBH | IN STOCK SHIP TODAY | 20 | |||
| 050-427-3188-220 | General Cable Technologies Corporation | IN STOCK SHIP TODAY | 15 | |||
| 3042-70M84 | Alcatel-Lucent | IN STOCK SHIP TODAY | 13 | |||
| 19200030427 | HARTING Technology Group | IN STOCK SHIP TODAY RoHS : Compliant |
| 11 | ||
| SDC0704-270MF | SWS | IN STOCK SHIP TODAY | 10 | |||
| SDC0704-271MF | SWS | IN STOCK SHIP TODAY | 10 | |||
| 21020-0427 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 5 | ||
| ATT3042-70-M84 | AT&T | IN STOCK SHIP TODAY | 2 | |||
![]() DB Roberts | MS20427-F3-3 | Military Specifications |
| 17,197 | ||
| MS20427-F4-4 | Military Specifications |
| 957 | |||
| MS20427-F4-5 | Military Specifications |
| 100 | |||
| MS20427-C3-4 | Military Specifications |
| 65 | |||
| 10427 | Essentra Components | 0 | ||||
| 10427 | Heyco | HLCBSC13-04 NATURAL | 0 | |||
| 12SWS0427 | Essentra Components | 0 | ||||
| 07001-00427 | Avdel | M5 CSK SOCKET HEAD SCREW | 0 | |||
| AC-CJK0-6-0427-074 | Southco | 0 | ||||
| 13RS042700 | Essentra Components | ROUND SPACER, .182 ID, .427 OD | 0 | |||
| 13RS042700B | Essentra Components | ROUND SPACER, .182 ID, .427 OD | 0 | |||
| DMPC0427-1-1/2C | Essentra Components | 0.427 ID 1.500 LENGTHPVC DIP Y | 0 | |||
| 900427 | Essentra Components | 14 IN 6 MM NOM DIA NYLON EXPAN | 0 | |||
| 07003-00427 | Avdel | O-RING SEAL | 0 | |||
| E5-6-0427-UU1 | Southco | These latches deliver affordable simplicity including quick access with just a quarter turn the versatility of multiple body materials plus the flexibility of modular design for numerous actuation and dimensional options. Ramped cams provide a snug fit | 0 | |||
![]() EBV Elektronik | C10427_CUTE-3-M | LEDIL | Cute3 MR11 Lenses For CREE XRE LEDs (Alt: C10427_CUTE-3-M) RoHS : Compliant | 0 | ||
| FJ8070104276914S RGP2 | Intel Corporation | Intel Core i710710U Processor 12M Cache up to 470 GHz FCBGA14F Tray (Alt: 999LH3) RoHS : Compliant | 0 | |||
![]() ECCO | 2170427022 | ITT Interconnect Solutions | 131 | |||
![]() FDH Electronics | M10-427499-111 | Amphenol Aerospace | Connector Acc |
| 519 | |
| 640427-3 | TE Connectivity | Backshells & Ac RoHS : Not Compliant | 400 | |||
| M10-427499-091 | Amphenol Aerospace | Connector Acc |
| 305 | ||
| 6304-279-1702 | TE Connectivity | Connector 38999 | 250 | |||
| 6304-278-1702 | TE Connectivity | Connector 38999 | 250 | |||
| 10-427499-231 | Amphenol Aerospace | Circular Conn |
| 162 | ||
| 177-504-2-7 | Glenair Inc | Rectangular Con |
| 155 | ||
| M10-427499-131 | Amphenol Aerospace | Connector Acc |
| 142 | ||
| 3C-04274-1 REV 3 | BTC-Customer Drawing "DWG" | Connector Misc | 8 | |||
| 10-427499-211 | Amphenol Aerospace | Connector 38999 | 2 | |||
| RJFSFTP5E0427 | Amphenol PCD | Connector |
| 0 | ||
| RSM04-27-30S | TE Connectivity | Connector Misc | 0 | |||
| 2455RG 80870427 | Honeywell Sensing and Control | Thermistor RoHS : Compliant |
| 0 | ||
| 10-427406-13G | Amphenol Aerospace | Connector Misc | 0 | |||
| 10-427406-17G | Amphenol Aerospace | Connector Misc | 0 | |||
![]() Maritex | 430450427 | Molex | Male Pin Headers; 430450427; MOLEX; 2; Tin; Vertical; 4 RoHS : Compliant |
| 11,601 | |
| 3-640427-2 | TE Connectivity | Panel Mount Connectors; 3-640427-2; TE CONNECTIVITY; 2; 1; Yellow; Tin RoHS : Compliant |
| 4,000 | ||
| C10427_CUTE-3-M | LEDIL | Lens for LED high power ; angle: 17 degrees FWHM; Number of LEDs: 3; Dimensions: round 35mm; Height: 15mm; meterial: PMMA; Fastening: glue; pin |
| 2 | ||
![]() Master Electronics | M4-90-427 | Brady Worldwide Inc | M4-90-427 RoHS : Compliant |
| 10 | |
| 3-644042-7 | TE Connectivity | 07P MTA100 CONN ASSY LF MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3042735 | Phoenix Contact | Feed-through terminal block - nom. voltage: 800 V - nominal current: 32 A - connection method: Spring-cage/plug-in connection - number of connections: 2 - cross section: 0.08 mm² - 6 mm² - AWG: 28 - 10 - width: 6.2 mm - color: gray - mounting type: NS 35/7 5 - NS 35/15 RoHS : Compliant |
| 0 | ||
| 3042780 | Phoenix Contact | Plug - number of positions: 1 - connection method: Spring-cage connection - cross section: 0.08 mm²- 6 mm² - AWG: 28 - 10 - nominal current: 32 A - nom. voltage: 800 V - width: 6.2 mm - color: gray RoHS : Compliant |
| 0 | ||
| 042798-0120 | ITT Interconnect Solutions | PV6G14S19SNS16 / 042798-0120 / Circular RoHS : Compliant |
| 0 | ||
| 000427560 | ITT Interconnect Solutions | Circular Connector - Receptacle - Female Sockets - 22 Position - Shell Size-Insert 36A-22 - Bayonet Lock - Crimp Contacts - Rear Panel Mount. RoHS : Not Compliant |
| 0 | ||
| IDSD-25-D-04.27 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-H-D-104-271 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-104-27-F-S | Samtec Inc | .100 High-Temp Terminal Strip RoHS : Compliant |
| 0 | ||
| HTSW-104-27-F-S-RE | Samtec Inc | HIGH TEMPERATURE PCB HEAD RoHS : Compliant |
| 0 | ||
| HTSW-104-27-LM-D | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HTSW-104-27-SM-Q | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-104-27-G-D-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-104-27-L-S-1125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-104-27-L-S-430 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
![]() Neutron USA | 19628240427 | HARTING Technology Group | Heavy Duty Power Connectors METAL HOOD HAN 24B 2 LVR LCKING RoHS : Compliant |
| 50 | |
19300240427![]() | HARTING Technology Group | Heavy Duty Power Connectors HAN 24B M32 TOP METAL HOOD RoHS : Compliant |
| 50 | ||
| 2904273 | Phoenix Contact | Terminal Block Interface Modules VIP-3/PT/HD26SUB/F RoHS : Compliant |
| 50 | ||
| 904-27-1-23-2-B-0 | Wakefield-Vette | Heat Sinks CHIPSET HS ELIPTICAL 27mm chip size, 22.6mm H, B/A, 10.58°C/W Natural RoHS : Compliant |
| 50 | ||
| 1604270000 | Weidmüller Interface GmbH & Co. KG | Terminal Block Tools & Accessories WKS 1/2 RoHS : Compliant |
| 46 | ||
| 2904274 | Phoenix Contact | Terminal Block Interface Modules VIP-3/PT/HD44SUB/F RoHS : Compliant |
| 7 | ||
| 19370240427 | HARTING Technology Group | Heavy Duty Power Connectors METAL HOOD HAN 24B 2 LEVER LCK RoHS : Compliant |
| 5 | ||
| 19390240427 | HARTING Technology Group | Heavy Duty Power Connectors 24B HP ScrewDwn Hood Top Entry, M32 RoHS : Compliant |
| 4 | ||
| 19431240427 | HARTING Technology Group | Heavy Duty Power Connectors HAN-ECO 24B HD DB LV TP ENTRY M32 W GLAND RoHS : Compliant |
| 0 | ||
| 2904277 | Phoenix Contact | Terminal Block Interface Modules VIP-2/PT/ D37SUB/M RoHS : Compliant |
| 0 | ||
| 6042737 | SICK AG | Cordset, Str M12 F 12Pos A-coded to cut end, 20 m, 12-wire, PUR Black, halogen-free |
| 0 | ||
| 09200042733 | HARTING Technology Group | Female Insert Gray 4+Ground Position Push In with Lock RoHS : Compliant |
| 0 | ||
| 6042736 | SICK AG | COMM CABLE; M12 X 12; 10M |
| 0 | ||
| 19431160427 | HARTING Technology Group | Heavy Duty Power Connectors HAN-ECO 10B DBL LVR TP ENTRY, M32 W/ GLN RoHS : Compliant |
| 0 | ||
| 09200030427 | HARTING Technology Group | Heavy Duty Power Connectors PLASTIC HOOD HAN 3A 1 LVR LCKING RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W04273 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. TNC Male to N Female Bulkhead Low Loss Cable Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly TNC male to N female bulkhead low loss cable using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N female bulkhead low loss cable using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N bulkhead cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W04273 can also be known as a low loss TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3W04273 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04273 can also be used in the other direction and will be N type female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to N type cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead low loss cable using LMR-240 coax with Times Microwave components. | 185 | ||
| PE3W04273-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Male to N Female Bulkhead Low Loss Cable 24 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly TNC male to N female bulkhead low loss cable 24 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to N female bulkhead low loss cable 24 inch length using LMR-240 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and type N bulkhead cable connection on the other. Our low loss TNC to type N cable assemblies have a male gender on end 1 and female on end 2. PE3W04273-24 can also be known as a low loss TNC plug to N type jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3W04273-24 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04273-24 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead low loss cable 24 inch length using LMR-240 coax with Times Microwave components. |
| 37 | ||
| PE3W00427-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to Mini SMP Female Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to mini SMP female cable 12 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to mini SMP female cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a mini SMP cable connection on the other. Our SMA to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W00427-12 can also be known as a SMA plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The semi-rigid RF cable has a between series connection. SMA plug to mini SMP jack cable assembly PE3W00427-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00427-12 can also be used in the other direction and will be a mini SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3W00427-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male to Mini SMP Female Cable 18 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to mini SMP female cable 18 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to mini SMP female cable 18 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a mini SMP cable connection on the other. Our SMA to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W00427-18 can also be known as a SMA plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The semi-rigid RF cable has a between series connection. SMA plug to mini SMP jack cable assembly PE3W00427-18 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00427-18 can also be used in the other direction and will be a mini SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3W00427-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to Mini SMP Female Cable 6 Inch Length Using RG405 Coax., Radio frequency assembly SMA male to mini SMP female cable 6 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to mini SMP female cable 6 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a mini SMP cable connection on the other. Our SMA to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W00427-6 can also be known as a SMA plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. The semi-rigid RF cable has a between series connection. SMA plug to mini SMP jack cable assembly PE3W00427-6 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder/solder attachment method and a stainless steel body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W00427-6 can also be used in the other direction and will be a mini SMP female to SMA male cable assembly if the opposite connectivity is required. SMA plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to mini SMP cable assembly for quick shipment worldwide. Variations of SMA and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to Mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3W04272LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. 10-32 Male to MMCX Plug Right Angle Cable Using RG174 Coax, LF Solder, RoHS. PE3W04272LF is a 10-32 male to MMCX plug right angle cable using RG174 coax. This Pasternack 10-32 male to MMCX plug right angle cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm MMCX for connector 2. 10-32 to MMCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male 10-32 to plug MMCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04272LF 10-32 male to MMCX plug right angle cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W04276 | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to SMA Female 2 Hole Flange Cable Using PE-047SR Coax. PE3W04276 is a MMCX plug right angle to SMA female 2 hole flange cable using PE-047SR coax. This Pasternack MMCX plug right angle to SMA female 2 hole flange cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to female SMA 2 hole flange cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W04276 MMCX plug right angle to SMA female 2 hole flange cable assembly is constructed with PE-047SR coax. | 0 | |||
| PE3M0427-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Pin to BMZ Size 8 Contact Socket Cable 6 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0427-6 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0427-6 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0427-6 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to BMZ socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0427-6 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ pin to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04275-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to MCX Jack Cable 36 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA male to MCX jack cable 36 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to MCX jack cable 36 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a MCX cable connection on the other. Our SMA to MCX cable assembly has a male gender on end 1 and a jack on end 2. PE3W04275-36 can also be known as a SMA plug to MCX female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04275-36 RF cable has a FEP jacket of 0.114-inch diameter. The flexible RF cable has a between series connection. SMA plug to MCX female cable assembly PE3W04275-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to MCX cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W04275-36 can also be used in the other direction and will be a MCX jack to SMA male cable assembly if the opposite connectivity is required. SMA plug to MCX female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0427-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Pin to BMZ Size 8 Contact Socket Cable 48 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0427-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0427-48 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0427-48 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to BMZ socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0427-48 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ pin to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 0 | ||
| PE3M0427-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Pin to BMZ Size 8 Contact Socket Cable 12 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0427-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0427-12 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0427-12 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to BMZ socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0427-12 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ pin to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04274/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using RG223 Coax with HeatShrink. PE3W04274/HS is a SMA male to N male cable using RG223 coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04274/HS SMA male to N male cable assembly is constructed with RG223 coax. | 0 | |||
| PE3W10427 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SSMB Plug Right Angle to SSMB Plug Right Angle Cable Using LMR-100 Coax. PE3W10427 is a SSMB plug right angle to SSMB plug right angle cable using LMR-100A coax. This Pasternack SSMB plug right angle to SSMB plug right angle cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SSMB for connector 2. SSMB right angle to SSMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMB right angle to plug SSMB right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10427 SSMB plug right angle to SSMB plug right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3M0427-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMZ, Connector 2 Size: 8, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086, RF Cable Type: Coax, RF Cable Specification: PE-P086 datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 Contact Pin to BMZ Size 8 Contact Socket Cable 36 Inch Length Using PE-P086 Coax with Heat Shrink, LF Solder. The PE3M0427-36 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a BMZ socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to BMZ cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. The PE3M0427-36 RF cable has a FEP jacket of 0.104-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to BMZ socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0427-36 in-series RF cable has 0.5 inches of repeated minimum bend radius along with 110 dB of minimum RF shielding. BMZ pin to BMZ socket cable assembly is built with PE-P086, which is a flexible coax type. The Pasternack PE3M0427-36 flexible cable assembly has a 50 Ohm impedance and is double-shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to BMZ RF cable are available on our downloadable PDF datasheet. BMZ pin to BMZ socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to BMZ RF cable assembly as per your requirements. |
| 0 | ||
| PE3W20427/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm. SMA Female 2 Hole Flange to SMP Female Right Angle Cable Using PE-SR047FL Coax with HeatShrink. PE3W20427/HS is a SMA female 2 hole flange to SMP female right angle cable using PE-SR047FL coax. This Pasternack SMA female 2 hole flange to SMP female right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMP for connector 2. SMA to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMA 2 hole flange to female SMP right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W20427/HS SMA female 2 hole flange to SMP female right angle cable assembly is constructed with PE-SR047FL coax. | 0 | |||
![]() TE Connectivity | 3-640427-3 | TE Connectivity | 03P MTA156 CONN ASSY 20AWG YEL Number of Positions: 3 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 3 Receptacle Connector Assembly Without | Part Number: 3-640427-3 | Internal Number: 3-640427-3 | TE Connectivity RoHS : Compliant |
| 18,030 | |
| 3-640427-4 | TE Connectivity | 04P MTA156 CONN ASSY 20AWG YEL Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 4 Receptacle Connector Assembly Without | Part Number: 3-640427-4 | Internal Number: 3-640427-4 | TE Connectivity RoHS : Compliant |
| 12,000 | ||
| 3-640427-7 | TE Connectivity | 07P MTA156 CONN ASSY 20AWG YEL Number of Positions: 7 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 7 Receptacle Connector Assembly Without | Part Number: 3-640427-7 | Internal Number: 3-640427-7 | TE Connectivity RoHS : Compliant |
| 10,044 | ||
| 4-640427-0 | TE Connectivity | 10P MTA156 CONN ASSY 20AWG YEL Number of Positions: 10 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 10 Receptacle Connector Assembly Without | Part Number: 4-640427-0 | Internal Number: 4-640427-0 | TE Connectivity RoHS : Compliant |
| 4,507 | ||
| 3-640427-9 | TE Connectivity | 09P MTA156 CONN ASSY 20AWG YEL Number of Positions: 9 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 9 Receptacle Connector Assembly Without | Part Number: 3-640427-9 | Internal Number: 3-640427-9 | TE Connectivity RoHS : Compliant |
| 3,818 | ||
| 4-640427-3 | TE Connectivity | 13P MTA156 CONN ASSY 20AWG YEL Number of Positions: 13 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 13 Receptacle Connector Assembly Without | Part Number: 4-640427-3 | Internal Number: 4-640427-3 | TE Connectivity RoHS : Compliant |
| 3,350 | ||
| 52042-7 | TE Connectivity | TERMINAL R PG 6 1/4 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 6 AWG Wire Size: 13 – 15 mm² Wire Size: 20800 – 33100 CMA Stud Size: M6 1/4 Closed Ring Tongue Terminal 6 AWG 13 – 15 mm² 20800 – 33100 CMA | Ring Terminal | Part Number: 52042-7 | Internal Number: 52042-7 | TE Connectivity RoHS : Compliant |
| 3,117 | ||
| 3-640427-6 | TE Connectivity | 06P MTA156 CONN ASSY 20AWG YEL Number of Positions: 6 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 6 Receptacle Connector Assembly Without | Part Number: 3-640427-6 | Internal Number: 3-640427-6 | TE Connectivity RoHS : Compliant |
| 2,466 | ||
| 4-640427-2 | TE Connectivity | 12P MTA156 CONN ASSY 20AWG YEL Number of Positions: 12 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 12 Receptacle Connector Assembly Without | Part Number: 4-640427-2 | Internal Number: 4-640427-2 | TE Connectivity RoHS : Compliant |
| 1,723 | ||
| 4-640427-1 | TE Connectivity | 11P MTA156 CONN ASSY 20AWG YEL Number of Positions: 11 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 11 Receptacle Connector Assembly Without | Part Number: 4-640427-1 | Internal Number: 4-640427-1 | TE Connectivity RoHS : Compliant |
| 1,665 | ||
| 9-50427-1 | TE Connectivity | FERRULE, THICK WALL, LEAD FREE Strain Relief Accessory Type: Ferrule Primary Product Material: Copper Brass Packaging Method: Loose Piece Packaging Quantity: 1 Ferrule Copper Loose Piece | Connector Strain Relief | Part Number: 9-50427-1 | Internal Number: 9-50427-1 | TE Connectivity RoHS : Compliant |
| 925 | ||
| 3-640427-8 | TE Connectivity | 08P MTA156 CONN ASSY 20AWG YEL Number of Positions: 8 Connector & Housing Type: Receptacle Connector Product Type: Connector Assembly Mating Alignment: Without Mating Retention: With Standard Rectangular Connector | 8 Receptacle Connector Assembly Without | Part Number: 3-640427-8 | Internal Number: 3-640427-8 | TE Connectivity RoHS : Compliant |
| 3 | ||
![]() Venkel Ltd. | CRN10-4-270JT | VENKEL LTD | Chip Resistor Array;CRN10;4;27R;�5%;Convex RoHS : Compliant | 60,000 | ||
| CRN10-4-271JT | VENKEL LTD | Chip Resistor Array;CRN10;4;270R;�5%;Convex RoHS : Compliant | 0 | |||
| CRN10-4-272JT | VENKEL LTD | Chip Resistor Array;CRN10;4;2.7K;�5%;Convex RoHS : Compliant | 0 | |||
![]() Vyrian | 10042774-002LF | Amphenol Communications Solutions | Connector Accessory, Cap Item, Glass Filled Liquid Crystal Polymer | 16,934 | ||
| WRAP-10-427 | Brady Worldwide Inc | Labeling Materials | 15,462 | |||
| 2904273 | Phoenix Contact | Interface Modules RoHS : Compliant | 13,298 | |||
| 10042773-004 | Amphenol Communications Solutions | Connector Accessory, Cover Item | 11,879 | |||
| 10042773-001LF | Amphenol Communications Solutions | Connector Accessory, Cover Item | 11,163 | |||
| AD9042-703F | Analog Devices Inc | 10,290 | ||||
| S_04272_B | Huber+suhner Ag | Wire And Cable, 1 Conductor(s), 500V, Communication Cable | 9,532 | |||
| 2904274 | Phoenix Contact | Interface Modules RoHS : Compliant | 9,292 | |||
| 3042780 | Phoenix Contact | Barrier Strip Terminal Block, 32A, 6mm2, 1 Row(s), 1 Deck(s) RoHS : Compliant | 7,427 | |||
| XC3042-70PG84CSPC0107 | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, CMOS, CPGA84 | 3,022 | |||
XC3042-70CQ100C![]() | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 4200 Gates, 70MHz, 144-Cell, CMOS, CQFP100 RoHS : Not Compliant | 2,983 | |||
XC3042-70CQ100B![]() | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 4200 Gates, 70MHz, 144-Cell, CMOS, CQFP100 RoHS : Not Compliant | 2,275 | |||
| XC3042-70PG132ISPC0107 | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, CMOS, CPGA132 | 1,864 | |||
| XC3042-70PP132CSPC0107 | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, CMOS, PPGA132 | 1,534 | |||
| XC3042-70PG132MSPC0107 | AMD Xilinx | Field Programmable Gate Array, 144 CLBs, 2000 Gates, 70MHz, CMOS, CPGA132 | 1,419 | |||
![]() Win Source Electronics | 43045-0427 | Molex | MICROFIT 3.0 VERT TH HDR DR TIN RoHS : Compliant |
| 48,760 |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |