[O2Micro]

GENERAL DESCRIPTION
The OZ6912 is an ACPI and PC98/99 Logo Certified, high performance, single slot PC Card controller with a synchronous 32-bit bus master/target PCI interface. This PC Card to PCI bridge host controller is compliant with the 2000 PC Card Standard. This standard incorporates the new 32-bit CardBus while retaining the 16-bit PC Card specification as defined by PCMCIA release 2.1.

FEATURES
• ACPI-PCI Bus Power Management Interface Specification Rev 1.1 Compliant
• Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, PME#, and CardBus CCLKRUN#
• Compliant with PCI specification v2.2, 2000 PC Card Standard 7.1
• Yenta™ PCI to PCMCIA CardBus Bridge register compatible
• ExCA (Exchangeable Card Architecture) compatible registers mappable in memory and I/O space
• IntelTM 82365SL PCIC Register Compatible
• Supports PCMCIA_ATA Specification
• Supports 5V/3.3V PC Cards and 3.3V CardBus cards
• Supports single PC Card or CardBus slot with hot insertion and removal
• Supports multiple FIFOs for PCI/CardBus data transfer
• Supports Direct Memory Access for PC/PCI and PCI/Way on PC Card socket
• Programmable interrupt protocol: PCI, PCI+ISA, PCI/Way, or PC/PCI interrupt signaling modes
• Win’98 IRQ and PC-98/99 compliant
• Supports parallel or serial interface for socket power control including devices from Micrel and TI
• Zoomed Video Support; Zoomed video buffer enable pins
• D3cold state PME# wakeup support
• 3.3Vaux Power Support
• Integrated PC 98/99 -Subsystem Vendor ID support, with auto lock bit
• LED Activity Pins