Description
The STEVAL-IPC001V1 is an integrated system to allow designers to evaluate a complete and ready-to-use cash register application. It is intended for the low to medium-end POS/cash register market and consists of a hardware board, firmware and PC GUI (graphical user interface). At the core of the board, the STR710FZ2 microcontroller controls all tasks of the system. The STR710FZ2 gives the board a wide scope of communication capabilities, incorporating four UARTs, one 10T-LAN, one PS/2 interface and various IC and SPI connectors. The firmware is a modular suite which simultaneously implements a typical cash register application and provides a suitable library to develop an optimized and customized final application. The PC GUI is a user-friendly PC application to manage both goods information and board parameters through a dedicated protocol. STEVAL-IPC001V1

Features
■ 4-Mbyte Flash, 32-Mbyte NAND and 1-Mbyte SRAM on board
■ Two smartcard readers
■ STM1404 secure chip, FIPS 140-2 compliant
■ Ethernet 10Base-T, 3 UARTs, 1 RS-485, 1 PS/ 2, 1 USB full speed, 4 x I2C, 1 x SPI, 2 LCDs
■ Expandable connector for upgrading to a 64- Mbyte Flash or 64-Mbyte SRAM
■ Firmware available
■ Cash register demo
■ TCP/IP stack
■ PS/2 firmware driver
■ RFID CRX14 driver
■ RFID manager
■ Smartcard manager for reader and writer
■ Fidelity card demo