Description:
Each Optoisolator in this data sheet contains an infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The OPI110 and OPI1264 devices have 890 nm Light Emitting Diode (LED) and NPN phototransistor sensor, whereas the OP113 has a 890 nm LED and a photodarlington sensor. The devices are sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor. The Optoisolators in this data sheet are UL approved under E 58730.
This series is designed for transmission of information between one power supply voltage and another where the potentials during surge conditions are not greater than the guaranteed isolation voltage.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.

Features:
• 10 kV electrical isolation
• Choice of phototransistor or photodarington output
• Low-cost plastic housing
• UL recognized File No. E58730*

Applications:
• High voltage isolation between input and output
• Electrical isolation in dirty environments
• Industrial equipment
• Medical equipment
• Office equipment