GENERAL DESCRIPTION
The ML6518 BiCMOS 18 line SCSI terminator provides active termination in SCSI systems using single-ended drivers and receivers. Active SCSI termination helps to effectively control analog transmission line effects such as ringing, noise, crosstalk, and ground bounce. In addition, the ML6518 provides support for hot insertability on the SCSI bus.

FEATURES
■ Fully monolithic IC solution providing active termination for 18 lines of the SCSI bus
■ Provides onboard support for hot-insertability on the SCSI bus
■ Low dropout voltage (1V) linear regulator, trimmed for accurate termination current
■ Low disconnect capacitance (typically < 5pF)
■ Logic pin with active pull-up to disconnect terminator from the SCSI bus
■ Current sinking capability in excess of 8.3mA per line to handle active negation driver overshoots above 2.85V
■ Negative clamping on all lines to handle signal assertion transients
■ Regulator can source 400mA and sink 150mA while maintaining regulation
■ Current limit and thermal shutdown protection